Functions/GenXdev.Coding.PowerShell.Modules/New-PullRequestForGenXdevModuleChanges.ps1
|
############################################################################### <# .SYNOPSIS Creates a pull request for changes made to a GenXdev module. .DESCRIPTION This function automates the process of creating a pull request for changes made to a GenXdev module. It handles GitHub authentication, repository forking, pull request creation, and window positioning using the Set-WindowPosition function. The function validates module dependencies, runs unit tests, and either creates a GitHub pull request or uploads to genXdev.net depending on repository availability. .PARAMETER ModuleName The name of the GenXdev module to create a pull request for. .PARAMETER CommitMessage The commit message to use when committing changes. .PARAMETER PullRequestTitle The title for the pull request. .PARAMETER PullRequestDescription The description for the pull request. .PARAMETER GitUserName Git username for commits. .PARAMETER GitUserEmail Git email for commits. .PARAMETER Monitor Monitor selection: 0=primary, 1+=specific monitor, -1=current, -2=secondary. .PARAMETER NoBorders Removes window borders and title bar for a cleaner appearance. .PARAMETER Width Window width in pixels for positioning applications. .PARAMETER Height Window height in pixels for positioning applications. .PARAMETER X Window horizontal position for positioning applications. .PARAMETER Y Window vertical position for positioning applications. .PARAMETER Left Places window on left half of screen. .PARAMETER Right Places window on right half of screen. .PARAMETER Top Places window on top half of screen. .PARAMETER Bottom Places window on bottom half of screen. .PARAMETER Centered Centers window on screen. .PARAMETER Fullscreen Maximizes window to fill entire screen. .PARAMETER RestoreFocus Returns focus to PowerShell window after positioning. .PARAMETER PassThru Returns window helper object for further manipulation. .PARAMETER SideBySide Places windows side by side with PowerShell on the same monitor. .PARAMETER FocusWindow Focus the window after positioning. .PARAMETER SetForeground Set the window to foreground after positioning. .PARAMETER Maximize Maximize the window after positioning. .PARAMETER KeysToSend Keystrokes to send to the window after positioning. .PARAMETER SessionOnly Use alternative settings stored in session for AI preferences. .PARAMETER ClearSession Clear alternative settings stored in session for AI preferences. .PARAMETER SkipSession Store settings only in persistent preferences without affecting session. .EXAMPLE New-PullRequestForGenXdevModuleChanges -ModuleName "GenXdev.Coding" ` -CommitMessage "Added new features" ` -PullRequestTitle "New Features" ` -PullRequestDescription "Added support for X and Y" .EXAMPLE prgenxdevmodule GenXdev.Coding "Bug fixes" "Fixed issues" "Various bug fixes implemented" #> function New-PullRequestForGenXdevModuleChanges { [CmdletBinding(SupportsShouldProcess)] [System.Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSUseSingularNouns', '')] [System.Diagnostics.CodeAnalysis.SuppressMessageAttribute('PSUseDeclaredVarsMoreThanAssignments', '')] [Alias('prgenxdevmodule')] param( ######################################################################## [Parameter( Position = 0, Mandatory = $true, HelpMessage = 'Name of the GenXdev module' )] [ValidateSet( 'GenXdev.AI', 'GenXdev.Coding', 'GenXdev.Console', 'GenXdev.Data', 'GenXdev.FileSystem', 'GenXdev.Helpers', 'GenXdev.Queries', 'GenXdev.Webbrowser', 'GenXdev.Windows' )] [string]$ModuleName, ######################################################################## [Parameter( Position = 1, Mandatory = $false, HelpMessage = 'Message for the commit' )] [string]$CommitMessage = 'Improvements to GenXdev module', ######################################################################## [Parameter( Position = 2, Mandatory = $false, HelpMessage = 'Title for the pull request' )] [string]$PullRequestTitle = 'Module improvements', ######################################################################## [Parameter( Position = 3, Mandatory = $false, HelpMessage = 'Description for the pull request' )] [string]$PullRequestDescription = ('These changes improve functionality ' + 'and fix issues I encountered.'), ######################################################################## [Parameter( Position = 4, Mandatory = $false, HelpMessage = 'Git username for commits' )] [string]$GitUserName = 'Your Name', ######################################################################## [Parameter( Position = 5, Mandatory = $false, HelpMessage = 'Git email for commits' )] [string]$GitUserEmail = 'you@example.com', ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Monitor selection: 0=primary, 1+=specific monitor, -1=current, -2=secondary' )] [Alias('m', 'mon')] [int] $Monitor, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Removes window borders and title bar for a cleaner appearance' )] [Alias('nb')] [switch] $NoBorders, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Window width in pixels for positioning applications' )] [int] $Width, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Window height in pixels for positioning applications' )] [int] $Height, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Window horizontal position for positioning applications' )] [int] $X, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Window vertical position for positioning applications' )] [int] $Y, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Places window on left half of screen' )] [switch] $Left, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Places window on right half of screen' )] [switch] $Right, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Places window on top half of screen' )] [switch] $Top, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Places window on bottom half of screen' )] [switch] $Bottom, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Centers window on screen' )] [switch] $Centered, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Maximizes window to fill entire screen' )] [Alias('sw')] [switch]$ShowWindow , ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Returns focus to PowerShell window after positioning' )] [Alias('rf', 'bg')] [switch]$RestoreFocus, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Returns window helper object for further manipulation' )] [Alias('pt')] [switch]$PassThru, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Places windows side by side with PowerShell on the same monitor' )] [Alias('sbs')] [switch]$SideBySide, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Focus the window after positioning' )] [Alias('fw','focus')] [switch] $FocusWindow, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Set the window to foreground after positioning' )] [Alias('fg')] [switch] $SetForeground, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Maximize the window after positioning' )] [switch] $Maximize, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Keystrokes to send to the window after positioning' )] [string[]] $KeysToSend, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Use alternative settings stored in session for AI preferences' )] [switch] $SessionOnly, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Clear alternative settings stored in session for AI preferences' )] [switch] $ClearSession, ######################################################################## [Parameter( Mandatory = $false, HelpMessage = 'Store settings only in persistent preferences without affecting session' )] [switch] $SkipSession ######################################################################## ) begin { # display work in progress notification to user Microsoft.PowerShell.Utility\Write-Host ( 'This script is not yet fully functional and is a work in progress.' ) -ForegroundColor Cyan Microsoft.PowerShell.Utility\Write-Host ( 'Feel free to fix it ;-).' ) -ForegroundColor Cyan # configure git safe directory for module path $null = git config --global --add safe.directory ( GenXdev.FileSystem\Expand-Path "$PSScriptRoot\..\..\..\..\..\") # initialize work variable for file upload path $w = 'store/fileupload' # ensure github cli is installed and available Microsoft.PowerShell.Utility\Write-Verbose 'Checking for GitHub CLI installation' GenXdev.AI\EnsureGithubCLIInstalled } process { # throw not implemented exception as function is work in progress throw ( Microsoft.PowerShell.Utility\New-Object 'System.NotImplementedException' ` -ArgumentList ( 'This function is not yet fully functional and is a work in progress. ' + 'Feel free to fix it ;-).' ) ) ######################################################################## function Register-GitHubApp { # github oauth application credentials $clientId = 'Ov23livZivIhWiBMR3Yb' # start device flow authentication GenXdev.Webbrowser\Close-Webbrowser -Force GenXdev.Webbrowser\Open-Webbrowser -nw -mon 0 -Right GenXdev.Webbrowser\Select-WebbrowserTab # use set-windowposition with parameters from bound parameters $params = GenXdev.Helpers\Copy-IdenticalParamValues ` -FunctionName 'GenXdev.Windows\Set-WindowPosition' ` -BoundParameters $PSBoundParameters ` -DefaultValues (Microsoft.PowerShell.Utility\Get-Variable ` -Scope Local -Name * -ErrorAction SilentlyContinue) GenXdev.Windows\Set-WindowPosition @params -Left # initiate device code request for github authentication $deviceCodeRequest = Microsoft.PowerShell.Utility\Invoke-RestMethod ` -Method Post ` -Uri 'https://github.com/login/device/code' ` -Body @{ client_id = $clientId scope = 'repo' } ` -Headers @{ Accept = 'application/json' } # navigate browser to verification url GenXdev.Webbrowser\Set-WebbrowserTabLocation ($deviceCodeRequest.verification_uri) # display authentication instructions to user Microsoft.PowerShell.Utility\Write-Host ( "Please visit: $($deviceCodeRequest.verification_uri)" ) Microsoft.PowerShell.Utility\Write-Host ( "And enter code: $($deviceCodeRequest.user_code)" ) Microsoft.PowerShell.Utility\Write-Host 'Waiting for authentication...' # poll for the access token $token = $null $startTime = Microsoft.PowerShell.Utility\Get-Date # continue polling until timeout or success while (((Microsoft.PowerShell.Utility\Get-Date) - $startTime).TotalSeconds -lt 300) { try { # request access token using device code $tokenResponse = Microsoft.PowerShell.Utility\Invoke-RestMethod ` -Method Post ` -Uri 'https://github.com/login/oauth/access_token' ` -Body @{ client_id = $clientId device_code = $deviceCodeRequest.device_code grant_type = 'urn:ietf:params:oauth:grant-type:device_code' } ` -Headers @{ Accept = 'application/json' } # check if access token was received if ($tokenResponse.access_token) { $token = $tokenResponse.access_token break } # handle authorization pending status if ($tokenResponse.error -eq 'authorization_pending') { Microsoft.PowerShell.Utility\Write-Verbose ( 'Authorization pending. Waiting for user to authorize...' ) } # handle rate limit exceeded status elseif ($tokenResponse.error -eq 'slow_down') { Microsoft.PowerShell.Utility\Write-Verbose ( 'Rate limit hit. Slowing down polling...' ) Microsoft.PowerShell.Utility\Start-Sleep -Seconds 10 } # handle unexpected error else { Microsoft.PowerShell.Utility\Write-Error ( "Unexpected error: $($tokenResponse.error)" ) break } } catch { Microsoft.PowerShell.Utility\Write-Verbose ( 'Still waiting for user to authorize...' ) } # wait before next polling attempt Microsoft.PowerShell.Utility\Start-Sleep -Seconds 5 } # check if authentication was successful if (-not $token) { Microsoft.PowerShell.Utility\Write-Error ( 'Authentication failed or timed out' ) } return $token } # validate genxdev module dependencies Microsoft.PowerShell.Utility\Write-Verbose ( "Checking dependencies for $ModuleName" ) GenXdev.Coding\Assert-GenXdevDependencyUsage -BaseModuleName $ModuleName ` -ErrorAction Stop # execute unit tests for the module Microsoft.PowerShell.Utility\Write-Verbose ( "Running unit tests for $ModuleName" ) try { GenXdev.Coding\Assert-GenXdevUnitTest -ModuleName $ModuleName ` -ErrorAction Stop } catch { Microsoft.PowerShell.Utility\Write-Error ( "Unit tests failed for $($ModuleName): $_" ) return } # get full path to module directory $modulePath = GenXdev.FileSystem\Expand-Path ( "$PSScriptRoot\..\..\..\..\$ModuleName\1.202.2025\" ) # verify module manifest exists Microsoft.PowerShell.Utility\Write-Verbose ( "Checking for module manifest at: $modulePath" ) if (!(Microsoft.PowerShell.Management\Test-Path ` -Path "$modulePath\$ModuleName.psd1")) { Microsoft.PowerShell.Utility\Write-Error ( 'No module manifest found in module directory' ) return } # load module version information from manifest $manifestFile = GenXdev.FileSystem\Expand-Path ( "$modulePath\$ModuleName.psd1" ) $moduleVersion = (Microsoft.PowerShell.Utility\Import-PowerShellDataFile ` $manifestFile).ModuleVersion Microsoft.PowerShell.Utility\Write-Verbose ( "Processing $ModuleName version $moduleVersion" ) $repoSearchResult = $null # authenticate with github api Microsoft.PowerShell.Utility\Write-Verbose 'Authenticating with GitHub' $token = Register-GitHubApp if ($null -ne $token) { # find the original repository in genxdev organization $headers = @{ Authorization = "token $token" Accept = 'application/vnd.github.v3+json' } # search for the repository in genxdev organization $repoSearchResult = Microsoft.PowerShell.Utility\Invoke-RestMethod ` -Method Get ` -Uri "https://api.github.com/repos/genXdev/$ModuleName" ` -Headers $headers ` -ErrorAction SilentlyContinue } # handle case where repository is not found if (!$repoSearchResult) { Microsoft.PowerShell.Utility\Write-Host ( 'Repository not found. Uploading to genXdev.net instead...' ) # create zip file from module directory try { $zipPath = [System.IO.Path]::GetTempFileName() + '.zip' Microsoft.PowerShell.Archive\Compress-Archive ` -Path "$modulePath\*" ` -DestinationPath $zipPath ` -Force } catch { Microsoft.PowerShell.Utility\Write-Error ( "Failed to compress module directory: $_" ) return } # upload zip file to genxdev.net try { $uploadUrl = ("https://genxdev.net/$w?filename=$([Uri]::EscapeDataString( "$ModuleName.zip"))&session=$([Uri]::EscapeDataString( [Guid]::NewGuid().ToString().ToLowerInvariant()))"); $fileBytes = [System.IO.File]::ReadAllBytes($zipPath) $result = Microsoft.PowerShell.Utility\Invoke-RestMethod ` -Uri $uploadUrl ` -Method Post ` -ContentType 'application/octet-stream' ` -Body $fileBytes Microsoft.PowerShell.Utility\Write-Verbose ( "Upload result: $($result | Microsoft.PowerShell.Utility\ConvertTo-Json -Compress)" ) Microsoft.PowerShell.Utility\Write-Host ( 'Module successfully uploaded to genXdev.net' ) Microsoft.PowerShell.Utility\Write-Host ( 'Please contact genXdev to inform about the new module suggestion.' ) return } finally { try { Microsoft.PowerShell.Management\Remove-Item $zipPath -Force } catch { Microsoft.PowerShell.Utility\Write-Error ( "Failed to remove temporary zip file: $_" ) } } } Microsoft.PowerShell.Utility\Write-Host ( "Found original repository: $($repoSearchResult.html_url)" ) # Create a fork if doesn't exist $username = (Microsoft.PowerShell.Utility\Invoke-RestMethod -Method Get -Uri 'https://api.github.com/user' -Headers $headers).login try { Microsoft.PowerShell.Utility\Invoke-RestMethod -Method Get -Uri "https://api.github.com/repos/$username/$ModuleName" -Headers $headers Microsoft.PowerShell.Utility\Write-Verbose 'Fork already exists' } catch { # Fork doesn't exist, create it if ($PSCmdlet.ShouldProcess("$ModuleName", 'Create fork')) { Microsoft.PowerShell.Utility\Write-Host "Creating fork of $ModuleName..." try { Microsoft.PowerShell.Utility\Invoke-RestMethod -Method Post -Uri "https://api.github.com/repos/genXdev/$ModuleName/forks" -Headers $headers } catch { Microsoft.PowerShell.Utility\Write-Error "Failed to create fork: $_" return } } } # Setup git and push changes if ($PSCmdlet.ShouldProcess("$ModuleName", 'Push changes to GitHub')) { Microsoft.PowerShell.Management\Push-Location $modulePath try { try { # Add the directory to Git's safe directory list Microsoft.PowerShell.Utility\Write-Verbose "Adding $modulePath to Git's safe directory list" git config --global --add safe.directory $modulePath # Remove the .git folder if it exists $gitFolderPath = Microsoft.PowerShell.Management\Join-Path -Path $modulePath -ChildPath '.git' if (Microsoft.PowerShell.Management\Test-Path -Path $gitFolderPath) { Microsoft.PowerShell.Utility\Write-Verbose "Removing existing .git folder at $gitFolderPath" GenXdev.FileSystem\Remove-AllItems $gitFolderPath -DeleteFolder } # Initialize a new Git repository git init # Ensure the remote URLs are correctly formatted $originUrl = "https://$token@github.com/$username/$ModuleName.git/" $upstreamUrl = "https://$token@github.com/genXdev/$ModuleName.git/" # Check if remotes already exist if (-not (git remote | Microsoft.PowerShell.Utility\Select-String -Pattern '^origin$')) { git remote add origin $originUrl Microsoft.PowerShell.Utility\Write-Verbose "Added origin remote: $originUrl" } if (-not (git remote | Microsoft.PowerShell.Utility\Select-String -Pattern '^upstream$')) { git remote add upstream $upstreamUrl Microsoft.PowerShell.Utility\Write-Verbose "Added upstream remote: $upstreamUrl" } # Configure Git user identity using GitHub API details git config user.name $GitUserName Microsoft.PowerShell.Utility\Write-Verbose "Git user.name set to '$GitUserName'." git config user.email $GitUserEmail Microsoft.PowerShell.Utility\Write-Verbose "Git user.email set to '$GitUserEmail'." # Switch to the new branch git checkout -b $newBranchName # Add and commit changes git add . if (git diff --cached --quiet) { Microsoft.PowerShell.Utility\Write-Verbose 'No changes to commit. Skipping commit step.' } else { git commit -m $CommitMessage } # Push the new branch git push -u origin $newBranchName -f } catch { Microsoft.PowerShell.Utility\Write-Error "Git command failed: $($Error[0])" return } } finally { Microsoft.PowerShell.Management\Pop-Location } } # --- Begin Modification --- # Find the commit with the exact message "Release 1.202.2025" in the GenXdev module repository using the GitHub API $releaseCommitMsg = 'Release 1.202.2025' $commitsApiUrl = "https://api.github.com/repos/genXdev/$ModuleName/commits" $releaseCommitHash = $null try { $commits = Microsoft.PowerShell.Utility\Invoke-RestMethod -Method Get -Uri $commitsApiUrl -Headers $headers foreach ($commit in $commits) { if ($commit.commit.message -eq $releaseCommitMsg) { $releaseCommitHash = $commit.sha break } } } catch { Microsoft.PowerShell.Utility\Write-Error "Failed to retrieve commits from the repository: $_" return } if (-not $releaseCommitHash) { Microsoft.PowerShell.Utility\Write-Error "No commit found with message '$releaseCommitMsg' in the repository" return } # Append the commit hash to the pull request description. $PullRequestDescription += "`nCommit hash: $releaseCommitHash" # Generate a unique branch name $timestamp = (Microsoft.PowerShell.Utility\Get-Date -Format 'yyyyMMddHHmmss') $newBranchName = "release-branch-$timestamp" # Create a branch in the user's fork pointing to the desired commit try { # Create the branch $createBranchBody = @{ ref = "refs/heads/$newBranchName" sha = $releaseCommitHash } Microsoft.PowerShell.Utility\Invoke-RestMethod -Method Post -Uri "https://api.github.com/repos/$username/$ModuleName/git/refs" -Body ($createBranchBody | Microsoft.PowerShell.Utility\ConvertTo-Json -Depth 10) -Headers $headers -ContentType 'application/json' Microsoft.PowerShell.Utility\Write-Verbose "Branch '$newBranchName' created in the user's fork." } catch { Microsoft.PowerShell.Utility\Write-Error "Failed to create branch '$newBranchName' in the user's fork: $($Error[0])" return } # Fetch GitHub user details Microsoft.PowerShell.Utility\Write-Verbose 'Fetching GitHub user details' try { $userDetails = Microsoft.PowerShell.Utility\Invoke-RestMethod -Method Get -Uri 'https://api.github.com/user' -Headers $headers -ErrorAction Stop $GitUserName = $userDetails.name $GitUserEmail = $userDetails.email if (-not $GitUserName) { $GitUserName = $userDetails.login Microsoft.PowerShell.Utility\Write-Verbose "GitHub user name not set, using login: $GitUserName" } if (-not $GitUserEmail) { $GitUserEmail = "$($userDetails.login)@users.noreply.github.com" Microsoft.PowerShell.Utility\Write-Verbose "GitHub user email not set, using noreply email: $GitUserEmail" } } catch { Microsoft.PowerShell.Utility\Write-Error "Failed to fetch GitHub user details: $($Error[0])" return } # Ensure changes are committed to the new branch if ($PSCmdlet.ShouldProcess("$ModuleName", 'Push changes to GitHub')) { Microsoft.PowerShell.Management\Push-Location $modulePath try { try { # Add the directory to Git's safe directory list Microsoft.PowerShell.Utility\Write-Verbose "Adding $modulePath to Git's safe directory list" git config --global --add safe.directory $modulePath # Remove the .git folder if it exists $gitFolderPath = Microsoft.PowerShell.Management\Join-Path -Path $modulePath -ChildPath '.git' if (Microsoft.PowerShell.Management\Test-Path -Path $gitFolderPath) { Microsoft.PowerShell.Utility\Write-Verbose "Removing existing .git folder at $gitFolderPath" GenXdev.FileSystem\Remove-AllItems $gitFolderPath -DeleteFolder } # Initialize a new Git repository git init # Ensure the remote URLs are correctly formatted $originUrl = "https://$token@github.com/$username/$ModuleName.git/" $upstreamUrl = "https://$token@github.com/genXdev/$ModuleName.git/" # Check if remotes already exist if (-not (git remote | Microsoft.PowerShell.Utility\Select-String -Pattern '^origin$')) { git remote add origin $originUrl Microsoft.PowerShell.Utility\Write-Verbose "Added origin remote: $originUrl" } if (-not (git remote | Microsoft.PowerShell.Utility\Select-String -Pattern '^upstream$')) { git remote add upstream $upstreamUrl Microsoft.PowerShell.Utility\Write-Verbose "Added upstream remote: $upstreamUrl" } # Configure Git user identity using GitHub API details git config user.name $GitUserName Microsoft.PowerShell.Utility\Write-Verbose "Git user.name set to '$GitUserName'." git config user.email $GitUserEmail Microsoft.PowerShell.Utility\Write-Verbose "Git user.email set to '$GitUserEmail'." # Switch to the new branch git checkout -b $newBranchName # Add and commit changes git add . if (git diff --cached --quiet) { Microsoft.PowerShell.Utility\Write-Verbose 'No changes to commit. Skipping commit step.' } else { git commit -m $CommitMessage } # Push the new branch git push -u origin $newBranchName -f } catch { Microsoft.PowerShell.Utility\Write-Error "Git command failed: $($Error[0])" return } } finally { Microsoft.PowerShell.Management\Pop-Location } } # # Ensure the branch contains changes before creating the pull request # $compareUrl = "https://api.github.com/repos/genXdev/$ModuleName/compare/main...${username}:$newBranchName" # try { # $compareResult = Microsoft.PowerShell.Utility\Invoke-RestMethod -Method Get -Uri $compareUrl -Headers $headers -ErrorAction Stop # if ($compareResult.commits.Count -eq 0) { # Microsoft.PowerShell.Utility\Write-Error "No commits between genXdev:main and ${username}:$newBranchName. Ensure changes are committed before creating the pull request." # return # } # } # catch { # Microsoft.PowerShell.Utility\Write-Error "Failed to compare branches: $($Error[0])" # return # } # Create pull request if ($PSCmdlet.ShouldProcess("$ModuleName", 'Create pull request')) { try { $prBody = @{ title = $PullRequestTitle body = $PullRequestDescription head = "${username}:${newBranchName}" # Use the new branch in the user's fork base = 'main' } # Create the pull request $pr = Microsoft.PowerShell.Utility\Invoke-RestMethod -Method Post -Uri "https://api.github.com/repos/genXdev/$ModuleName/pulls" -Body ($prBody | Microsoft.PowerShell.Utility\ConvertTo-Json -Depth 10) -Headers $headers -ContentType 'application/json' Microsoft.PowerShell.Utility\Write-Host "Pull request created successfully: $($pr.html_url)" -ForegroundColor Cyan Microsoft.PowerShell.Utility\Write-Host 'Thank you for contributing to GenXdev!' -ForegroundColor Green } catch { Microsoft.PowerShell.Utility\Write-Error "Failed to create pull request: $($Error[0])" return } } } end { } } ############################################################################### |