AWS.Tools.DeviceFarm.XML

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>AWS.Tools.DeviceFarm</name>
    </assembly>
    <members>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.AddDFResourceTagCmdlet">
            <summary>
            Associates the specified tags to a resource with the specified <code>resourceArn</code>.
            If existing tags on a resource are not specified in the request parameters, they are
            not changed. When a resource is deleted, the tags associated with that resource are
            deleted as well.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.AddDFResourceTagCmdlet.ResourceARN">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource(s) to which to add tags. You can associate
            tags with the following Device Farm resources: <code>PROJECT</code>, <code>RUN</code>,
            <code>NETWORK_PROFILE</code>, <code>INSTANCE_PROFILE</code>, <code>DEVICE_INSTANCE</code>,
            <code>SESSION</code>, <code>DEVICE_POOL</code>, <code>DEVICE</code>, and <code>VPCE_CONFIGURATION</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.AddDFResourceTagCmdlet.Tag">
            <summary>
            <para>
            <para>The tags to add to the resource. A tag is an array of key-value pairs. Tag keys can
            have a maximum character length of 128 characters, and tag values can have a maximum
            length of 256 characters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.AddDFResourceTagCmdlet.PassThru">
            <summary>
            Returns the value passed to the ResourceARN parameter.
            By default, this cmdlet does not generate any output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.AddDFResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFAccountSettingListCmdlet">
            <summary>
            Returns the number of unmetered iOS and/or unmetered Android devices that have been
            purchased by the account.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFArtifactListCmdlet">
            <summary>
            Gets information about artifacts.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFArtifactListCmdlet.Arn">
            <summary>
            <para>
            <para>The Run, Job, Suite, or Test ARN.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFArtifactListCmdlet.Type">
            <summary>
            <para>
            <para>The artifacts' type.</para><para>Allowed values include:</para><ul><li><para>FILE: The artifacts are files.</para></li><li><para>LOG: The artifacts are logs.</para></li><li><para>SCREENSHOT: The artifacts are screenshots.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFArtifactListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFDeviceCmdlet">
            <summary>
            Gets information about a unique device type.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDeviceCmdlet.Arn">
            <summary>
            <para>
            <para>The device type's ARN.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFDeviceInstanceCmdlet">
            <summary>
            Returns information about a device instance belonging to a private device fleet.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDeviceInstanceCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the instance you're requesting information about.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFDeviceInstanceListCmdlet">
            <summary>
            Returns information about the private device instances associated with one or more
            AWS accounts.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDeviceInstanceListCmdlet.MaxResult">
            <summary>
            <para>
            <para>An integer specifying the maximum number of items you want to return in the API response.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDeviceInstanceListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFDeviceListCmdlet">
            <summary>
            Gets information about unique device types.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDeviceListCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the project.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDeviceListCmdlet.Filter">
            <summary>
            <para>
            <para>Used to select a set of devices. A filter is made up of an attribute, an operator,
            and one or more values.</para><ul><li><para>Attribute: The aspect of a device such as platform or model used as the selection
            criteria in a device filter.</para><para>Allowed values include:</para><ul><li><para>ARN: The Amazon Resource Name (ARN) of the device. For example, "arn:aws:devicefarm:us-west-2::device:12345Example".</para></li><li><para>PLATFORM: The device platform. Valid values are "ANDROID" or "IOS".</para></li><li><para>OS_VERSION: The operating system version. For example, "10.3.2".</para></li><li><para>MODEL: The device model. For example, "iPad 5th Gen".</para></li><li><para>AVAILABILITY: The current availability of the device. Valid values are "AVAILABLE",
            "HIGHLY_AVAILABLE", "BUSY", or "TEMPORARY_NOT_AVAILABLE".</para></li><li><para>FORM_FACTOR: The device form factor. Valid values are "PHONE" or "TABLET".</para></li><li><para>MANUFACTURER: The device manufacturer. For example, "Apple".</para></li><li><para>REMOTE_ACCESS_ENABLED: Whether the device is enabled for remote access. Valid values
            are "TRUE" or "FALSE".</para></li><li><para>REMOTE_DEBUG_ENABLED: Whether the device is enabled for remote debugging. Valid values
            are "TRUE" or "FALSE". <i>This attribute will be ignored, as remote debugging is <a href="https://docs.aws.amazon.com/devicefarm/latest/developerguide/history.html">no
            longer supported</a>.</i></para></li><li><para>INSTANCE_ARN: The Amazon Resource Name (ARN) of the device instance.</para></li><li><para>INSTANCE_LABELS: The label of the device instance.</para></li><li><para>FLEET_TYPE: The fleet type. Valid values are "PUBLIC" or "PRIVATE".</para></li></ul></li><li><para>Operator: The filter operator.</para><ul><li><para>The EQUALS operator is available for every attribute except INSTANCE_LABELS.</para></li><li><para>The CONTAINS operator is available for the INSTANCE_LABELS and MODEL attributes.</para></li><li><para>The IN and NOT_IN operators are available for the ARN, OS_VERSION, MODEL, MANUFACTURER,
            and INSTANCE_ARN attributes.</para></li><li><para>The LESS_THAN, GREATER_THAN, LESS_THAN_OR_EQUALS, and GREATER_THAN_OR_EQUALS operators
            are also available for the OS_VERSION attribute.</para></li></ul></li><li><para>Values: An array of one or more filter values.</para><ul><li><para>The IN and NOT_IN operators take a values array that has one or more elements.</para></li><li><para>The other operators require an array with a single element.</para></li><li><para>In a request, the AVAILABILITY attribute takes "AVAILABLE", "HIGHLY_AVAILABLE", "BUSY",
            or "TEMPORARY_NOT_AVAILABLE" as values.</para></li></ul></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDeviceListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCmdlet">
            <summary>
            Gets information about a device pool.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCmdlet.Arn">
            <summary>
            <para>
            <para>The device pool's ARN.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet">
            <summary>
            Gets information about compatibility with a device pool.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.CustomerArtifactPaths_AndroidPath">
            <summary>
            <para>
            <para>Comma-separated list of paths on the Android device where the artifacts generated
            by the customer's tests will be pulled from.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.AppArn">
            <summary>
            <para>
            <para>The ARN of the app that is associated with the specified device pool.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Configuration_AuxiliaryApp">
            <summary>
            <para>
            <para>A list of Upload ARNs for app packages that will be installed alongside your app.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Configuration_BillingMethod">
            <summary>
            <para>
            <para>Specifies the billing method for a test run: <code>metered</code> or <code>unmetered</code>.
            If the parameter is not specified, the default value is <code>metered</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Radios_Bluetooth">
            <summary>
            <para>
            <para>True if Bluetooth is enabled at the beginning of the test; otherwise, false.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.CustomerArtifactPaths_DeviceHostPath">
            <summary>
            <para>
            <para>Comma-separated list of paths in the test execution environment where the artifacts
            generated by the customer's tests will be pulled from.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.DevicePoolArn">
            <summary>
            <para>
            <para>The device pool's ARN.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Configuration_ExtraDataPackageArn">
            <summary>
            <para>
            <para>The ARN of the extra data for the run. The extra data is a .zip file that AWS Device
            Farm will extract to external data for Android or the app's sandbox for iOS.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Test_Filter">
            <summary>
            <para>
            <para>The test's filter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Radios_Gp">
            <summary>
            <para>
            <para>True if GPS is enabled at the beginning of the test; otherwise, false.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.CustomerArtifactPaths_IosPath">
            <summary>
            <para>
            <para>Comma-separated list of paths on the iOS device where the artifacts generated by the
            customer's tests will be pulled from.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Location_Latitude">
            <summary>
            <para>
            <para>The latitude.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Configuration_Locale">
            <summary>
            <para>
            <para>Information about the locale that is used for the run.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Location_Longitude">
            <summary>
            <para>
            <para>The longitude.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Configuration_NetworkProfileArn">
            <summary>
            <para>
            <para>Reserved for internal use.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Radios_Nfc">
            <summary>
            <para>
            <para>True if NFC is enabled at the beginning of the test; otherwise, false.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Test_Parameter">
            <summary>
            <para>
            <para>The test's parameters, such as test framework parameters and fixture settings. Parameters
            are represented by name-value pairs of strings.</para><para>For all tests:</para><ul><li><para>app_performance_monitoring: Performance monitoring is enabled by default. Set this
            parameter to "false" to disable it.</para></li></ul><para>For Calabash tests:</para><ul><li><para>profile: A cucumber profile, for example, "my_profile_name".</para></li><li><para>tags: You can limit execution to features or scenarios that have (or don't have) certain
            tags, for example, "@smoke" or "@smoke,~@wip".</para></li></ul><para>For Appium tests (all types):</para><ul><li><para>appium_version: The Appium version. Currently supported values are "1.6.5" (and higher),
            "latest", and "default".</para><ul><li><para>“latest” will run the latest Appium version supported by Device Farm (1.9.1).</para></li><li><para>For “default”, Device Farm will choose a compatible version of Appium for the device.
            The current behavior is to run 1.7.2 on Android devices and iOS 9 and earlier, 1.7.2
            for iOS 10 and later.</para></li><li><para>This behavior is subject to change.</para></li></ul></li></ul><para>For Fuzz tests (Android only):</para><ul><li><para>event_count: The number of events, between 1 and 10000, that the UI fuzz test should
            perform.</para></li><li><para>throttle: The time, in ms, between 0 and 1000, that the UI fuzz test should wait between
            events.</para></li><li><para>seed: A seed to use for randomizing the UI fuzz test. Using the same seed value between
            tests ensures identical event sequences.</para></li></ul><para>For Explorer tests:</para><ul><li><para>username: A username to use if the Explorer encounters a login form. If not supplied,
            no username will be inserted.</para></li><li><para>password: A password to use if the Explorer encounters a login form. If not supplied,
            no password will be inserted.</para></li></ul><para>For Instrumentation:</para><ul><li><para>filter: A test filter string. Examples:</para><ul><li><para>Running a single test case: "com.android.abc.Test1"</para></li><li><para>Running a single test: "com.android.abc.Test1#smoke"</para></li><li><para>Running multiple tests: "com.android.abc.Test1,com.android.abc.Test2"</para></li></ul></li></ul><para>For XCTest and XCTestUI:</para><ul><li><para>filter: A test filter string. Examples:</para><ul><li><para>Running a single test class: "LoginTests"</para></li><li><para>Running a multiple test classes: "LoginTests,SmokeTests"</para></li><li><para>Running a single test: "LoginTests/testValid"</para></li><li><para>Running multiple tests: "LoginTests/testValid,LoginTests/testInvalid"</para></li></ul></li></ul><para>For UIAutomator:</para><ul><li><para>filter: A test filter string. Examples:</para><ul><li><para>Running a single test case: "com.android.abc.Test1"</para></li><li><para>Running a single test: "com.android.abc.Test1#smoke"</para></li><li><para>Running multiple tests: "com.android.abc.Test1,com.android.abc.Test2"</para></li></ul></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Test_TestPackageArn">
            <summary>
            <para>
            <para>The ARN of the uploaded test that will be run.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Test_TestSpecArn">
            <summary>
            <para>
            <para>The ARN of the YAML-formatted test specification.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.TestType">
            <summary>
            <para>
            <para>The test type for the specified device pool.</para><para>Allowed values include the following:</para><ul><li><para>BUILTIN_FUZZ: The built-in fuzz type.</para></li><li><para>BUILTIN_EXPLORER: For Android, an app explorer that will traverse an Android app,
            interacting with it and capturing screenshots at the same time.</para></li><li><para>APPIUM_JAVA_JUNIT: The Appium Java JUnit type.</para></li><li><para>APPIUM_JAVA_TESTNG: The Appium Java TestNG type.</para></li><li><para>APPIUM_PYTHON: The Appium Python type.</para></li><li><para>APPIUM_NODE: The Appium Node.js type.</para></li><li><para>APPIUM_RUBY: The Appium Ruby type.</para></li><li><para>APPIUM_WEB_JAVA_JUNIT: The Appium Java JUnit type for web apps.</para></li><li><para>APPIUM_WEB_JAVA_TESTNG: The Appium Java TestNG type for web apps.</para></li><li><para>APPIUM_WEB_PYTHON: The Appium Python type for web apps.</para></li><li><para>APPIUM_WEB_NODE: The Appium Node.js type for web apps.</para></li><li><para>APPIUM_WEB_RUBY: The Appium Ruby type for web apps.</para></li><li><para>CALABASH: The Calabash type.</para></li><li><para>INSTRUMENTATION: The Instrumentation type.</para></li><li><para>UIAUTOMATION: The uiautomation type.</para></li><li><para>UIAUTOMATOR: The uiautomator type.</para></li><li><para>XCTEST: The Xcode test type.</para></li><li><para>XCTEST_UI: The Xcode UI test type.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Test_Type">
            <summary>
            <para>
            <para>The test's type.</para><para>Must be one of the following values:</para><ul><li><para>BUILTIN_FUZZ: The built-in fuzz type.</para></li><li><para>BUILTIN_EXPLORER: For Android, an app explorer that will traverse an Android app,
            interacting with it and capturing screenshots at the same time.</para></li><li><para>APPIUM_JAVA_JUNIT: The Appium Java JUnit type.</para></li><li><para>APPIUM_JAVA_TESTNG: The Appium Java TestNG type.</para></li><li><para>APPIUM_PYTHON: The Appium Python type.</para></li><li><para>APPIUM_NODE: The Appium Node.js type.</para></li><li><para>APPIUM_RUBY: The Appium Ruby type.</para></li><li><para>APPIUM_WEB_JAVA_JUNIT: The Appium Java JUnit type for web apps.</para></li><li><para>APPIUM_WEB_JAVA_TESTNG: The Appium Java TestNG type for web apps.</para></li><li><para>APPIUM_WEB_PYTHON: The Appium Python type for web apps.</para></li><li><para>APPIUM_WEB_NODE: The Appium Node.js type for web apps.</para></li><li><para>APPIUM_WEB_RUBY: The Appium Ruby type for web apps.</para></li><li><para>CALABASH: The Calabash type.</para></li><li><para>INSTRUMENTATION: The Instrumentation type.</para></li><li><para>UIAUTOMATION: The uiautomation type.</para></li><li><para>UIAUTOMATOR: The uiautomator type.</para></li><li><para>XCTEST: The Xcode test type.</para></li><li><para>XCTEST_UI: The Xcode UI test type.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Configuration_VpceConfigurationArn">
            <summary>
            <para>
            <para>An array of Amazon Resource Names (ARNs) for your VPC endpoint configurations.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolCompatibilityCmdlet.Radios_Wifi">
            <summary>
            <para>
            <para>True if Wi-Fi is enabled at the beginning of the test; otherwise, false.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolListCmdlet">
            <summary>
            Gets information about device pools.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolListCmdlet.Arn">
            <summary>
            <para>
            <para>The project ARN.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolListCmdlet.Type">
            <summary>
            <para>
            <para>The device pools' type.</para><para>Allowed values include:</para><ul><li><para>CURATED: A device pool that is created and managed by AWS Device Farm.</para></li><li><para>PRIVATE: A device pool that is created and managed by the device pool developer.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFDevicePoolListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFInstanceProfileCmdlet">
            <summary>
            Returns information about the specified instance profile.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFInstanceProfileCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of your instance profile.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFInstanceProfileListCmdlet">
            <summary>
            Returns information about all the instance profiles in an AWS account.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFInstanceProfileListCmdlet.MaxResult">
            <summary>
            <para>
            <para>An integer specifying the maximum number of items you want to return in the API response.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFInstanceProfileListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFJobCmdlet">
            <summary>
            Gets information about a job.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFJobCmdlet.Arn">
            <summary>
            <para>
            <para>The job's ARN.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFJobListCmdlet">
            <summary>
            Gets information about jobs for a given test run.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFJobListCmdlet.Arn">
            <summary>
            <para>
            <para>The run's Amazon Resource Name (ARN).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFJobListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFNetworkProfileCmdlet">
            <summary>
            Returns information about a network profile.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFNetworkProfileCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the network profile you want to return information
            about.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFNetworkProfileListCmdlet">
            <summary>
            Returns the list of available network profiles.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFNetworkProfileListCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the project for which you want to list network profiles.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFNetworkProfileListCmdlet.Type">
            <summary>
            <para>
            <para>The type of network profile you wish to return information about. Valid values are
            listed below.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFNetworkProfileListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFOfferingCmdlet">
            <summary>
            Returns a list of products or offerings that the user can manage through the API.
            Each offering record indicates the recurring price per unit and the frequency for
            that offering. The API returns a <code>NotEligible</code> error if the user is not
            permitted to invoke the operation. Please contact <a href="mailto:aws-devicefarm-support@amazon.com">aws-devicefarm-support@amazon.com</a>
            if you believe that you should be able to invoke this operation.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFOfferingCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFOfferingPromotionCmdlet">
            <summary>
            Returns a list of offering promotions. Each offering promotion record contains the
            ID and description of the promotion. The API returns a <code>NotEligible</code> error
            if the caller is not permitted to invoke the operation. Contact <a href="mailto:aws-devicefarm-support@amazon.com">aws-devicefarm-support@amazon.com</a>
            if you believe that you should be able to invoke this operation.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFOfferingPromotionCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFOfferingStatusCmdlet">
            <summary>
            Gets the current status and future status of all offerings purchased by an AWS account.
            The response indicates how many offerings are currently available and the offerings
            that will be available in the next period. The API returns a <code>NotEligible</code>
            error if the user is not permitted to invoke the operation. Please contact <a href="mailto:aws-devicefarm-support@amazon.com">aws-devicefarm-support@amazon.com</a>
            if you believe that you should be able to invoke this operation.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFOfferingStatusCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFOfferingTransactionCmdlet">
            <summary>
            Returns a list of all historical purchases, renewals, and system renewal transactions
            for an AWS account. The list is paginated and ordered by a descending timestamp (most
            recent transactions are first). The API returns a <code>NotEligible</code> error if
            the user is not permitted to invoke the operation. Please contact <a href="mailto:aws-devicefarm-support@amazon.com">aws-devicefarm-support@amazon.com</a>
            if you believe that you should be able to invoke this operation.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFOfferingTransactionCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFProjectCmdlet">
            <summary>
            Gets information about a project.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFProjectCmdlet.Arn">
            <summary>
            <para>
            <para>The project's ARN.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFProjectListCmdlet">
            <summary>
            Gets information about projects.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFProjectListCmdlet.Arn">
            <summary>
            <para>
            <para>Optional. If no Amazon Resource Name (ARN) is specified, then AWS Device Farm returns
            a list of all projects for the AWS account. You can also specify a project ARN.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFProjectListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFRemoteAccessSessionCmdlet">
            <summary>
            Returns a link to a currently running remote access session.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFRemoteAccessSessionCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the remote access session about which you want to
            get session information.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFRemoteAccessSessionListCmdlet">
            <summary>
            Returns a list of all currently running remote access sessions.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFRemoteAccessSessionListCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the project about which you are requesting information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFRemoteAccessSessionListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFResourceTagCmdlet">
            <summary>
            List the tags for an AWS Device Farm resource.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFResourceTagCmdlet.ResourceARN">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource(s) for which to list tags. You can
            associate tags with the following Device Farm resources: <code>PROJECT</code>, <code>RUN</code>,
            <code>NETWORK_PROFILE</code>, <code>INSTANCE_PROFILE</code>, <code>DEVICE_INSTANCE</code>,
            <code>SESSION</code>, <code>DEVICE_POOL</code>, <code>DEVICE</code>, and <code>VPCE_CONFIGURATION</code>.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFRunCmdlet">
            <summary>
            Gets information about a run.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFRunCmdlet.Arn">
            <summary>
            <para>
            <para>The run's ARN.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFRunListCmdlet">
            <summary>
            Gets information about runs, given an AWS Device Farm project ARN.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFRunListCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the project for which you want to list runs.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFRunListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFSampleListCmdlet">
            <summary>
            Gets information about samples, given an AWS Device Farm job ARN.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFSampleListCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the job used to list samples.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFSampleListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFSuiteCmdlet">
            <summary>
            Gets information about a suite.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFSuiteCmdlet.Arn">
            <summary>
            <para>
            <para>The suite's ARN.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFSuiteListCmdlet">
            <summary>
            Gets information about test suites for a given job.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFSuiteListCmdlet.Arn">
            <summary>
            <para>
            <para>The job's Amazon Resource Name (ARN).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFSuiteListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFTestCmdlet">
            <summary>
            Gets information about a test.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFTestCmdlet.Arn">
            <summary>
            <para>
            <para>The test's ARN.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFTestListCmdlet">
            <summary>
            Gets information about tests in a given test suite.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFTestListCmdlet.Arn">
            <summary>
            <para>
            <para>The test suite's Amazon Resource Name (ARN).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFTestListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFUniqueProblemListCmdlet">
            <summary>
            Gets information about unique problems.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFUniqueProblemListCmdlet.Arn">
            <summary>
            <para>
            <para>The unique problems' ARNs.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFUniqueProblemListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFUploadCmdlet">
            <summary>
            Gets information about an upload.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFUploadCmdlet.Arn">
            <summary>
            <para>
            <para>The upload's ARN.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFUploadListCmdlet">
            <summary>
            Gets information about uploads, given an AWS Device Farm project ARN.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFUploadListCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the project for which you want to list uploads.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFUploadListCmdlet.Type">
            <summary>
            <para>
            <para>The type of upload.</para><para>Must be one of the following values:</para><ul><li><para>ANDROID_APP: An Android upload.</para></li><li><para>IOS_APP: An iOS upload.</para></li><li><para>WEB_APP: A web application upload.</para></li><li><para>EXTERNAL_DATA: An external data upload.</para></li><li><para>APPIUM_JAVA_JUNIT_TEST_PACKAGE: An Appium Java JUnit test package upload.</para></li><li><para>APPIUM_JAVA_TESTNG_TEST_PACKAGE: An Appium Java TestNG test package upload.</para></li><li><para>APPIUM_PYTHON_TEST_PACKAGE: An Appium Python test package upload.</para></li><li><para>APPIUM_NODE_TEST_PACKAGE: An Appium Node.js test package upload.</para></li><li><para>APPIUM_RUBY_TEST_PACKAGE: An Appium Ruby test package upload.</para></li><li><para>APPIUM_WEB_JAVA_JUNIT_TEST_PACKAGE: An Appium Java JUnit test package upload for a
            web app.</para></li><li><para>APPIUM_WEB_JAVA_TESTNG_TEST_PACKAGE: An Appium Java TestNG test package upload for
            a web app.</para></li><li><para>APPIUM_WEB_PYTHON_TEST_PACKAGE: An Appium Python test package upload for a web app.</para></li><li><para>APPIUM_WEB_NODE_TEST_PACKAGE: An Appium Node.js test package upload for a web app.</para></li><li><para>APPIUM_WEB_RUBY_TEST_PACKAGE: An Appium Ruby test package upload for a web app.</para></li><li><para>CALABASH_TEST_PACKAGE: A Calabash test package upload.</para></li><li><para>INSTRUMENTATION_TEST_PACKAGE: An instrumentation upload.</para></li><li><para>UIAUTOMATION_TEST_PACKAGE: A uiautomation test package upload.</para></li><li><para>UIAUTOMATOR_TEST_PACKAGE: A uiautomator test package upload.</para></li><li><para>XCTEST_TEST_PACKAGE: An Xcode test package upload.</para></li><li><para>XCTEST_UI_TEST_PACKAGE: An Xcode UI test package upload.</para></li><li><para>APPIUM_JAVA_JUNIT_TEST_SPEC: An Appium Java JUnit test spec upload.</para></li><li><para>APPIUM_JAVA_TESTNG_TEST_SPEC: An Appium Java TestNG test spec upload.</para></li><li><para>APPIUM_PYTHON_TEST_SPEC: An Appium Python test spec upload.</para></li><li><para>APPIUM_NODE_TEST_SPEC: An Appium Node.js test spec upload.</para></li><li><para> APPIUM_RUBY_TEST_SPEC: An Appium Ruby test spec upload.</para></li><li><para>APPIUM_WEB_JAVA_JUNIT_TEST_SPEC: An Appium Java JUnit test spec upload for a web app.</para></li><li><para>APPIUM_WEB_JAVA_TESTNG_TEST_SPEC: An Appium Java TestNG test spec upload for a web
            app.</para></li><li><para>APPIUM_WEB_PYTHON_TEST_SPEC: An Appium Python test spec upload for a web app.</para></li><li><para>APPIUM_WEB_NODE_TEST_SPEC: An Appium Node.js test spec upload for a web app.</para></li><li><para>APPIUM_WEB_RUBY_TEST_SPEC: An Appium Ruby test spec upload for a web app.</para></li><li><para>INSTRUMENTATION_TEST_SPEC: An instrumentation test spec upload.</para></li><li><para>XCTEST_UI_TEST_SPEC: An Xcode UI test spec upload.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFUploadListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFVPCEConfigurationCmdlet">
            <summary>
            Returns information about the configuration settings for your Amazon Virtual Private
            Cloud (VPC) endpoint.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFVPCEConfigurationCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the VPC endpoint configuration you want to describe.</para>
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.GetDFVPCEConfigurationListCmdlet">
            <summary>
            Returns information about all Amazon Virtual Private Cloud (VPC) endpoint configurations
            in the AWS account.<br/><br/>This operation automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFVPCEConfigurationListCmdlet.MaxResult">
            <summary>
            <para>
            <para>An integer specifying the maximum number of items you want to return in the API response.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.GetDFVPCEConfigurationListCmdlet.NextToken">
            <summary>
            <para>
            <para>An identifier that was returned from the previous call to this operation, which can
            be used to return the next set of items in the list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, assign $null, for the first call, and the value of $AWSHistory.LastServiceResponse.NextToken, for subsequent calls, to this parameter.
            </para>
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.InstallDFToRemoteAccessSessionCmdlet">
            <summary>
            Installs an application to the device in a remote access session. For Android applications,
            the file must be in .apk format. For iOS applications, the file must be in .ipa format.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.InstallDFToRemoteAccessSessionCmdlet.AppArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the app about which you are requesting information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.InstallDFToRemoteAccessSessionCmdlet.RemoteAccessSessionArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the remote access session about which you are requesting
            information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.InstallDFToRemoteAccessSessionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.NewDFDevicePoolCmdlet">
            <summary>
            Creates a device pool.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFDevicePoolCmdlet.Description">
            <summary>
            <para>
            <para>The device pool's description.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFDevicePoolCmdlet.MaxDevice">
            <summary>
            <para>
            <para>The number of devices that Device Farm can add to your device pool. Device Farm adds
            devices that are available and that meet the criteria that you assign for the <code>rules</code>
            parameter. Depending on how many devices meet these constraints, your device pool
            might contain fewer devices than the value for this parameter.</para><para>By specifying the maximum number of devices, you can control the costs that you incur
            by running tests.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFDevicePoolCmdlet.Name">
            <summary>
            <para>
            <para>The device pool's name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFDevicePoolCmdlet.ProjectArn">
            <summary>
            <para>
            <para>The ARN of the project for the device pool.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFDevicePoolCmdlet.Rule">
            <summary>
            <para>
            <para>The device pool's rules.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFDevicePoolCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.NewDFInstanceProfileCmdlet">
            <summary>
            Creates a profile that can be applied to one or more private fleet device instances.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFInstanceProfileCmdlet.Description">
            <summary>
            <para>
            <para>The description of your instance profile.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFInstanceProfileCmdlet.ExcludeAppPackagesFromCleanup">
            <summary>
            <para>
            <para>An array of strings specifying the list of app packages that should not be cleaned
            up from the device after a test run is over.</para><para>The list of packages is only considered if you set <code>packageCleanup</code> to
            <code>true</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFInstanceProfileCmdlet.Name">
            <summary>
            <para>
            <para>The name of your instance profile.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFInstanceProfileCmdlet.PackageCleanup">
            <summary>
            <para>
            <para>When set to <code>true</code>, Device Farm will remove app packages after a test run.
            The default value is <code>false</code> for private devices.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFInstanceProfileCmdlet.RebootAfterUse">
            <summary>
            <para>
            <para>When set to <code>true</code>, Device Farm will reboot the instance after a test run.
            The default value is <code>true</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFInstanceProfileCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet">
            <summary>
            Creates a network profile.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet.Description">
            <summary>
            <para>
            <para>The description of the network profile.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet.DownlinkBandwidthBit">
            <summary>
            <para>
            <para>The data throughput rate in bits per second, as an integer from 0 to 104857600.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet.DownlinkDelayMs">
            <summary>
            <para>
            <para>Delay time for all packets to destination in milliseconds as an integer from 0 to
            2000.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet.DownlinkJitterMs">
            <summary>
            <para>
            <para>Time variation in the delay of received packets in milliseconds as an integer from
            0 to 2000.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet.DownlinkLossPercent">
            <summary>
            <para>
            <para>Proportion of received packets that fail to arrive from 0 to 100 percent.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet.Name">
            <summary>
            <para>
            <para>The name you wish to specify for the new network profile.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet.ProjectArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the project for which you want to create a network
            profile.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet.Type">
            <summary>
            <para>
            <para>The type of network profile you wish to create. Valid values are listed below.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet.UplinkBandwidthBit">
            <summary>
            <para>
            <para>The data throughput rate in bits per second, as an integer from 0 to 104857600.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet.UplinkDelayMs">
            <summary>
            <para>
            <para>Delay time for all packets to destination in milliseconds as an integer from 0 to
            2000.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet.UplinkJitterMs">
            <summary>
            <para>
            <para>Time variation in the delay of received packets in milliseconds as an integer from
            0 to 2000.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet.UplinkLossPercent">
            <summary>
            <para>
            <para>Proportion of transmitted packets that fail to arrive from 0 to 100 percent.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFNetworkProfileCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.NewDFOfferingPurchaseCmdlet">
            <summary>
            Immediately purchases offerings for an AWS account. Offerings renew with the latest
            total purchased quantity for an offering, unless the renewal was overridden. The API
            returns a <code>NotEligible</code> error if the user is not permitted to invoke the
            operation. Please contact <a href="mailto:aws-devicefarm-support@amazon.com">aws-devicefarm-support@amazon.com</a>
            if you believe that you should be able to invoke this operation.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFOfferingPurchaseCmdlet.OfferingId">
            <summary>
            <para>
            <para>The ID of the offering.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFOfferingPurchaseCmdlet.OfferingPromotionId">
            <summary>
            <para>
            <para>The ID of the offering promotion to be applied to the purchase.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFOfferingPurchaseCmdlet.Quantity">
            <summary>
            <para>
            <para>The number of device slots you wish to purchase in an offering request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFOfferingPurchaseCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.NewDFOfferingRenewalCmdlet">
            <summary>
            Explicitly sets the quantity of devices to renew for an offering, starting from the
            <code>effectiveDate</code> of the next period. The API returns a <code>NotEligible</code>
            error if the user is not permitted to invoke the operation. Please contact <a href="mailto:aws-devicefarm-support@amazon.com">aws-devicefarm-support@amazon.com</a>
            if you believe that you should be able to invoke this operation.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFOfferingRenewalCmdlet.OfferingId">
            <summary>
            <para>
            <para>The ID of a request to renew an offering.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFOfferingRenewalCmdlet.Quantity">
            <summary>
            <para>
            <para>The quantity requested in an offering renewal.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFOfferingRenewalCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.NewDFProjectCmdlet">
            <summary>
            Creates a new project.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFProjectCmdlet.DefaultJobTimeoutMinute">
            <summary>
            <para>
            <para>Sets the execution timeout value (in minutes) for a project. All test runs in this
            project will use the specified execution timeout value unless overridden when scheduling
            a run.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFProjectCmdlet.Name">
            <summary>
            <para>
            <para>The project's name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFProjectCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet">
            <summary>
            Specifies and starts a remote access session.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.Configuration_BillingMethod">
            <summary>
            <para>
            <para>The billing method for the remote access session.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.ClientId">
            <summary>
            <para>
            <para>Unique identifier for the client. If you want access to multiple devices on the same
            client, you should pass the same <code>clientId</code> value in each call to <code>CreateRemoteAccessSession</code>.
            This is required only if <code>remoteDebugEnabled</code> is set to <code>true</code>.</para><para><i>Remote debugging is <a href="https://docs.aws.amazon.com/devicefarm/latest/developerguide/history.html">no
            longer supported</a>.</i></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.DeviceArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the device for which you want to create a remote
            access session.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.InstanceArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the device instance for which you want to create
            a remote access session.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.InteractionMode">
            <summary>
            <para>
            <para>The interaction mode of the remote access session. Valid values are:</para><ul><li><para>INTERACTIVE: You can interact with the iOS device by viewing, touching, and rotating
            the screen. You <b>cannot</b> run XCUITest framework-based tests in this mode.</para></li><li><para>NO_VIDEO: You are connected to the device but cannot interact with it or view the
            screen. This mode has the fastest test execution speed. You <b>can</b> run XCUITest
            framework-based tests in this mode.</para></li><li><para>VIDEO_ONLY: You can view the screen but cannot touch or rotate it. You <b>can</b>
            run XCUITest framework-based tests and watch the screen in this mode.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.Name">
            <summary>
            <para>
            <para>The name of the remote access session that you wish to create.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.ProjectArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the project for which you want to create a remote
            access session.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.RemoteDebugEnabled">
            <summary>
            <para>
            <para>Set to <code>true</code> if you want to access devices remotely for debugging in your
            remote access session.</para><para><i>Remote debugging is <a href="https://docs.aws.amazon.com/devicefarm/latest/developerguide/history.html">no
            longer supported</a>.</i></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.RemoteRecordAppArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) for the app to be recorded in the remote access session.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.RemoteRecordEnabled">
            <summary>
            <para>
            <para>Set to <code>true</code> to enable remote recording for the remote access session.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.SkipAppResign">
            <summary>
            <para>
            <para>When set to <code>true</code>, for private devices, Device Farm will not sign your
            app again. For public devices, Device Farm always signs your apps again and this parameter
            has no effect.</para><para>For more information about how Device Farm re-signs your app(s), see <a href="https://aws.amazon.com/device-farm/faq/">Do
            you modify my app?</a> in the <i>AWS Device Farm FAQs</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.SshPublicKey">
            <summary>
            <para>
            <para><i>Ignored.</i> The public key of the <code>ssh</code> key pair you want to use for
            connecting to remote devices in your remote debugging session. This is only required
            if <code>remoteDebugEnabled</code> is set to <code>true</code>.</para><para><i>Remote debugging is <a href="https://docs.aws.amazon.com/devicefarm/latest/developerguide/history.html">no
            longer supported</a>.</i></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.Configuration_VpceConfigurationArn">
            <summary>
            <para>
            <para>An array of Amazon Resource Names (ARNs) included in the VPC endpoint configuration.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFRemoteAccessSessionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.NewDFUploadCmdlet">
            <summary>
            Uploads an app or test scripts.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFUploadCmdlet.ContentType">
            <summary>
            <para>
            <para>The upload's content type (for example, "application/octet-stream").</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFUploadCmdlet.Name">
            <summary>
            <para>
            <para>The upload's file name. The name should not contain the '/' character. If uploading
            an iOS app, the file name needs to end with the <code>.ipa</code> extension. If uploading
            an Android app, the file name needs to end with the <code>.apk</code> extension. For
            all others, the file name must end with the <code>.zip</code> file extension.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFUploadCmdlet.ProjectArn">
            <summary>
            <para>
            <para>The ARN of the project for the upload.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFUploadCmdlet.Type">
            <summary>
            <para>
            <para>The upload's upload type.</para><para>Must be one of the following values:</para><ul><li><para>ANDROID_APP: An Android upload.</para></li><li><para>IOS_APP: An iOS upload.</para></li><li><para>WEB_APP: A web application upload.</para></li><li><para>EXTERNAL_DATA: An external data upload.</para></li><li><para>APPIUM_JAVA_JUNIT_TEST_PACKAGE: An Appium Java JUnit test package upload.</para></li><li><para>APPIUM_JAVA_TESTNG_TEST_PACKAGE: An Appium Java TestNG test package upload.</para></li><li><para>APPIUM_PYTHON_TEST_PACKAGE: An Appium Python test package upload.</para></li><li><para>APPIUM_NODE_TEST_PACKAGE: An Appium Node.js test package upload.</para></li><li><para>APPIUM_RUBY_TEST_PACKAGE: An Appium Ruby test package upload.</para></li><li><para>APPIUM_WEB_JAVA_JUNIT_TEST_PACKAGE: An Appium Java JUnit test package upload for a
            web app.</para></li><li><para>APPIUM_WEB_JAVA_TESTNG_TEST_PACKAGE: An Appium Java TestNG test package upload for
            a web app.</para></li><li><para>APPIUM_WEB_PYTHON_TEST_PACKAGE: An Appium Python test package upload for a web app.</para></li><li><para>APPIUM_WEB_NODE_TEST_PACKAGE: An Appium Node.js test package upload for a web app.</para></li><li><para>APPIUM_WEB_RUBY_TEST_PACKAGE: An Appium Ruby test package upload for a web app.</para></li><li><para>CALABASH_TEST_PACKAGE: A Calabash test package upload.</para></li><li><para>INSTRUMENTATION_TEST_PACKAGE: An instrumentation upload.</para></li><li><para>UIAUTOMATION_TEST_PACKAGE: A uiautomation test package upload.</para></li><li><para>UIAUTOMATOR_TEST_PACKAGE: A uiautomator test package upload.</para></li><li><para>XCTEST_TEST_PACKAGE: An Xcode test package upload.</para></li><li><para>XCTEST_UI_TEST_PACKAGE: An Xcode UI test package upload.</para></li><li><para>APPIUM_JAVA_JUNIT_TEST_SPEC: An Appium Java JUnit test spec upload.</para></li><li><para>APPIUM_JAVA_TESTNG_TEST_SPEC: An Appium Java TestNG test spec upload.</para></li><li><para>APPIUM_PYTHON_TEST_SPEC: An Appium Python test spec upload.</para></li><li><para>APPIUM_NODE_TEST_SPEC: An Appium Node.js test spec upload.</para></li><li><para>APPIUM_RUBY_TEST_SPEC: An Appium Ruby test spec upload.</para></li><li><para>APPIUM_WEB_JAVA_JUNIT_TEST_SPEC: An Appium Java JUnit test spec upload for a web app.</para></li><li><para>APPIUM_WEB_JAVA_TESTNG_TEST_SPEC: An Appium Java TestNG test spec upload for a web
            app.</para></li><li><para>APPIUM_WEB_PYTHON_TEST_SPEC: An Appium Python test spec upload for a web app.</para></li><li><para>APPIUM_WEB_NODE_TEST_SPEC: An Appium Node.js test spec upload for a web app.</para></li><li><para>APPIUM_WEB_RUBY_TEST_SPEC: An Appium Ruby test spec upload for a web app.</para></li><li><para>INSTRUMENTATION_TEST_SPEC: An instrumentation test spec upload.</para></li><li><para>XCTEST_UI_TEST_SPEC: An Xcode UI test spec upload.</para></li></ul><para><b>Note</b> If you call <code>CreateUpload</code> with <code>WEB_APP</code> specified,
            AWS Device Farm throws an <code>ArgumentException</code> error.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFUploadCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.NewDFVPCEConfigurationCmdlet">
            <summary>
            Creates a configuration record in Device Farm for your Amazon Virtual Private Cloud
            (VPC) endpoint.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFVPCEConfigurationCmdlet.ServiceDnsName">
            <summary>
            <para>
            <para>The DNS name of the service running in your VPC that you want Device Farm to test.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFVPCEConfigurationCmdlet.VpceConfigurationDescription">
            <summary>
            <para>
            <para>An optional description, providing more details about your VPC endpoint configuration.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFVPCEConfigurationCmdlet.VpceConfigurationName">
            <summary>
            <para>
            <para>The friendly name you give to your VPC endpoint configuration, to manage your configurations
            more easily.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFVPCEConfigurationCmdlet.VpceServiceName">
            <summary>
            <para>
            <para>The name of the VPC endpoint service running inside your AWS account that you want
            Device Farm to test.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.NewDFVPCEConfigurationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.RemoveDFDevicePoolCmdlet">
            <summary>
            Deletes a device pool given the pool ARN. Does not allow deletion of curated pools
            owned by the system.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFDevicePoolCmdlet.Arn">
            <summary>
            <para>
            <para>Represents the Amazon Resource Name (ARN) of the Device Farm device pool you wish
            to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFDevicePoolCmdlet.PassThru">
            <summary>
            Returns the value passed to the Arn parameter.
            By default, this cmdlet does not generate any output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFDevicePoolCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.RemoveDFInstanceProfileCmdlet">
            <summary>
            Deletes a profile that can be applied to one or more private device instances.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFInstanceProfileCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the instance profile you are requesting to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFInstanceProfileCmdlet.PassThru">
            <summary>
            Returns the value passed to the Arn parameter.
            By default, this cmdlet does not generate any output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFInstanceProfileCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.RemoveDFNetworkProfileCmdlet">
            <summary>
            Deletes a network profile.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFNetworkProfileCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the network profile you want to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFNetworkProfileCmdlet.PassThru">
            <summary>
            Returns the value passed to the Arn parameter.
            By default, this cmdlet does not generate any output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFNetworkProfileCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.RemoveDFProjectCmdlet">
            <summary>
            Deletes an AWS Device Farm project, given the project ARN.
             
              
            <para><b>Note</b> Deleting this resource does not stop an in-progress run.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFProjectCmdlet.Arn">
            <summary>
            <para>
            <para>Represents the Amazon Resource Name (ARN) of the Device Farm project you wish to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFProjectCmdlet.PassThru">
            <summary>
            Returns the value passed to the Arn parameter.
            By default, this cmdlet does not generate any output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFProjectCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.RemoveDFRemoteAccessSessionCmdlet">
            <summary>
            Deletes a completed remote access session and its results.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFRemoteAccessSessionCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the session for which you want to delete remote
            access.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFRemoteAccessSessionCmdlet.PassThru">
            <summary>
            Returns the value passed to the Arn parameter.
            By default, this cmdlet does not generate any output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFRemoteAccessSessionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.RemoveDFResourceTagCmdlet">
            <summary>
            Deletes the specified tags from a resource.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFResourceTagCmdlet.ResourceARN">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource(s) from which to delete tags. You can
            associate tags with the following Device Farm resources: <code>PROJECT</code>, <code>RUN</code>,
            <code>NETWORK_PROFILE</code>, <code>INSTANCE_PROFILE</code>, <code>DEVICE_INSTANCE</code>,
            <code>SESSION</code>, <code>DEVICE_POOL</code>, <code>DEVICE</code>, and <code>VPCE_CONFIGURATION</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFResourceTagCmdlet.TagKey">
            <summary>
            <para>
            <para>The keys of the tags to be removed.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFResourceTagCmdlet.PassThru">
            <summary>
            Returns the value passed to the ResourceARN parameter.
            By default, this cmdlet does not generate any output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.RemoveDFRunCmdlet">
            <summary>
            Deletes the run, given the run ARN.
             
              
            <para><b>Note</b> Deleting this resource does not stop an in-progress run.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFRunCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) for the run you wish to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFRunCmdlet.PassThru">
            <summary>
            Returns the value passed to the Arn parameter.
            By default, this cmdlet does not generate any output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFRunCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.RemoveDFUploadCmdlet">
            <summary>
            Deletes an upload given the upload ARN.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFUploadCmdlet.Arn">
            <summary>
            <para>
            <para>Represents the Amazon Resource Name (ARN) of the Device Farm upload you wish to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFUploadCmdlet.PassThru">
            <summary>
            Returns the value passed to the Arn parameter.
            By default, this cmdlet does not generate any output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFUploadCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.RemoveDFVPCEConfigurationCmdlet">
            <summary>
            Deletes a configuration for your Amazon Virtual Private Cloud (VPC) endpoint.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFVPCEConfigurationCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the VPC endpoint configuration you want to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFVPCEConfigurationCmdlet.PassThru">
            <summary>
            Returns the value passed to the Arn parameter.
            By default, this cmdlet does not generate any output.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.RemoveDFVPCEConfigurationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.StopDFJobCmdlet">
            <summary>
            Initiates a stop request for the current job. AWS Device Farm will immediately stop
            the job on the device where tests have not started executing, and you will not be
            billed for this device. On the device where tests have started executing, Setup Suite
            and Teardown Suite tests will run to completion before stopping execution on the device.
            You will be billed for Setup, Teardown, and any tests that were in progress or already
            completed.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.StopDFJobCmdlet.Arn">
            <summary>
            <para>
            <para>Represents the Amazon Resource Name (ARN) of the Device Farm job you wish to stop.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.StopDFJobCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.StopDFRemoteAccessSessionCmdlet">
            <summary>
            Ends a specified remote access session.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.StopDFRemoteAccessSessionCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the remote access session you wish to stop.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.StopDFRemoteAccessSessionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.StopDFRunCmdlet">
            <summary>
            Initiates a stop request for the current test run. AWS Device Farm will immediately
            stop the run on devices where tests have not started executing, and you will not be
            billed for these devices. On devices where tests have started executing, Setup Suite
            and Teardown Suite tests will run to completion before stopping execution on those
            devices. You will be billed for Setup, Teardown, and any tests that were in progress
            or already completed.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.StopDFRunCmdlet.Arn">
            <summary>
            <para>
            <para>Represents the Amazon Resource Name (ARN) of the Device Farm run you wish to stop.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.StopDFRunCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet">
            <summary>
            Schedules a run.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.ExecutionConfiguration_AccountsCleanup">
            <summary>
            <para>
            <para>True if account cleanup is enabled at the beginning of the test; otherwise, false.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.CustomerArtifactPaths_AndroidPath">
            <summary>
            <para>
            <para>Comma-separated list of paths on the Android device where the artifacts generated
            by the customer's tests will be pulled from.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.AppArn">
            <summary>
            <para>
            <para>The ARN of the app to schedule a run.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.ExecutionConfiguration_AppPackagesCleanup">
            <summary>
            <para>
            <para>True if app package cleanup is enabled at the beginning of the test; otherwise, false.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Configuration_AuxiliaryApp">
            <summary>
            <para>
            <para>A list of Upload ARNs for app packages that will be installed alongside your app.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Configuration_BillingMethod">
            <summary>
            <para>
            <para>Specifies the billing method for a test run: <code>metered</code> or <code>unmetered</code>.
            If the parameter is not specified, the default value is <code>metered</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Radios_Bluetooth">
            <summary>
            <para>
            <para>True if Bluetooth is enabled at the beginning of the test; otherwise, false.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.CustomerArtifactPaths_DeviceHostPath">
            <summary>
            <para>
            <para>Comma-separated list of paths in the test execution environment where the artifacts
            generated by the customer's tests will be pulled from.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.DevicePoolArn">
            <summary>
            <para>
            <para>The ARN of the device pool for the run to be scheduled.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Configuration_ExtraDataPackageArn">
            <summary>
            <para>
            <para>The ARN of the extra data for the run. The extra data is a .zip file that AWS Device
            Farm will extract to external data for Android or the app's sandbox for iOS.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Test_Filter">
            <summary>
            <para>
            <para>The test's filter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.DeviceSelectionConfiguration_Filter">
            <summary>
            <para>
            Amazon.DeviceFarm.Model.DeviceSelectionConfiguration.Filters
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Radios_Gp">
            <summary>
            <para>
            <para>True if GPS is enabled at the beginning of the test; otherwise, false.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.CustomerArtifactPaths_IosPath">
            <summary>
            <para>
            <para>Comma-separated list of paths on the iOS device where the artifacts generated by the
            customer's tests will be pulled from.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.ExecutionConfiguration_JobTimeoutMinute">
            <summary>
            <para>
            <para>The number of minutes a test run will execute before it times out.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Location_Latitude">
            <summary>
            <para>
            <para>The latitude.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Configuration_Locale">
            <summary>
            <para>
            <para>Information about the locale that is used for the run.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Location_Longitude">
            <summary>
            <para>
            <para>The longitude.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.DeviceSelectionConfiguration_MaxDevice">
            <summary>
            <para>
            <para>The maximum number of devices to be included in a test run.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Name">
            <summary>
            <para>
            <para>The name for the run to be scheduled.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Configuration_NetworkProfileArn">
            <summary>
            <para>
            <para>Reserved for internal use.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Radios_Nfc">
            <summary>
            <para>
            <para>True if NFC is enabled at the beginning of the test; otherwise, false.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Test_Parameter">
            <summary>
            <para>
            <para>The test's parameters, such as test framework parameters and fixture settings. Parameters
            are represented by name-value pairs of strings.</para><para>For all tests:</para><ul><li><para>app_performance_monitoring: Performance monitoring is enabled by default. Set this
            parameter to "false" to disable it.</para></li></ul><para>For Calabash tests:</para><ul><li><para>profile: A cucumber profile, for example, "my_profile_name".</para></li><li><para>tags: You can limit execution to features or scenarios that have (or don't have) certain
            tags, for example, "@smoke" or "@smoke,~@wip".</para></li></ul><para>For Appium tests (all types):</para><ul><li><para>appium_version: The Appium version. Currently supported values are "1.6.5" (and higher),
            "latest", and "default".</para><ul><li><para>“latest” will run the latest Appium version supported by Device Farm (1.9.1).</para></li><li><para>For “default”, Device Farm will choose a compatible version of Appium for the device.
            The current behavior is to run 1.7.2 on Android devices and iOS 9 and earlier, 1.7.2
            for iOS 10 and later.</para></li><li><para>This behavior is subject to change.</para></li></ul></li></ul><para>For Fuzz tests (Android only):</para><ul><li><para>event_count: The number of events, between 1 and 10000, that the UI fuzz test should
            perform.</para></li><li><para>throttle: The time, in ms, between 0 and 1000, that the UI fuzz test should wait between
            events.</para></li><li><para>seed: A seed to use for randomizing the UI fuzz test. Using the same seed value between
            tests ensures identical event sequences.</para></li></ul><para>For Explorer tests:</para><ul><li><para>username: A username to use if the Explorer encounters a login form. If not supplied,
            no username will be inserted.</para></li><li><para>password: A password to use if the Explorer encounters a login form. If not supplied,
            no password will be inserted.</para></li></ul><para>For Instrumentation:</para><ul><li><para>filter: A test filter string. Examples:</para><ul><li><para>Running a single test case: "com.android.abc.Test1"</para></li><li><para>Running a single test: "com.android.abc.Test1#smoke"</para></li><li><para>Running multiple tests: "com.android.abc.Test1,com.android.abc.Test2"</para></li></ul></li></ul><para>For XCTest and XCTestUI:</para><ul><li><para>filter: A test filter string. Examples:</para><ul><li><para>Running a single test class: "LoginTests"</para></li><li><para>Running a multiple test classes: "LoginTests,SmokeTests"</para></li><li><para>Running a single test: "LoginTests/testValid"</para></li><li><para>Running multiple tests: "LoginTests/testValid,LoginTests/testInvalid"</para></li></ul></li></ul><para>For UIAutomator:</para><ul><li><para>filter: A test filter string. Examples:</para><ul><li><para>Running a single test case: "com.android.abc.Test1"</para></li><li><para>Running a single test: "com.android.abc.Test1#smoke"</para></li><li><para>Running multiple tests: "com.android.abc.Test1,com.android.abc.Test2"</para></li></ul></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.ProjectArn">
            <summary>
            <para>
            <para>The ARN of the project for the run to be scheduled.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.ExecutionConfiguration_SkipAppResign">
            <summary>
            <para>
            <para>When set to <code>true</code>, for private devices, Device Farm will not sign your
            app again. For public devices, Device Farm always signs your apps again and this parameter
            has no effect.</para><para>For more information about how Device Farm re-signs your app(s), see <a href="https://aws.amazon.com/device-farm/faq/">Do
            you modify my app?</a> in the <i>AWS Device Farm FAQs</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Test_TestPackageArn">
            <summary>
            <para>
            <para>The ARN of the uploaded test that will be run.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Test_TestSpecArn">
            <summary>
            <para>
            <para>The ARN of the YAML-formatted test specification.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Test_Type">
            <summary>
            <para>
            <para>The test's type.</para><para>Must be one of the following values:</para><ul><li><para>BUILTIN_FUZZ: The built-in fuzz type.</para></li><li><para>BUILTIN_EXPLORER: For Android, an app explorer that will traverse an Android app,
            interacting with it and capturing screenshots at the same time.</para></li><li><para>APPIUM_JAVA_JUNIT: The Appium Java JUnit type.</para></li><li><para>APPIUM_JAVA_TESTNG: The Appium Java TestNG type.</para></li><li><para>APPIUM_PYTHON: The Appium Python type.</para></li><li><para>APPIUM_NODE: The Appium Node.js type.</para></li><li><para>APPIUM_RUBY: The Appium Ruby type.</para></li><li><para>APPIUM_WEB_JAVA_JUNIT: The Appium Java JUnit type for web apps.</para></li><li><para>APPIUM_WEB_JAVA_TESTNG: The Appium Java TestNG type for web apps.</para></li><li><para>APPIUM_WEB_PYTHON: The Appium Python type for web apps.</para></li><li><para>APPIUM_WEB_NODE: The Appium Node.js type for web apps.</para></li><li><para>APPIUM_WEB_RUBY: The Appium Ruby type for web apps.</para></li><li><para>CALABASH: The Calabash type.</para></li><li><para>INSTRUMENTATION: The Instrumentation type.</para></li><li><para>UIAUTOMATION: The uiautomation type.</para></li><li><para>UIAUTOMATOR: The uiautomator type.</para></li><li><para>XCTEST: The Xcode test type.</para></li><li><para>XCTEST_UI: The Xcode UI test type.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.ExecutionConfiguration_VideoCapture">
            <summary>
            <para>
            <para>Set to true to enable video capture; otherwise, set to false. The default is true.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Configuration_VpceConfigurationArn">
            <summary>
            <para>
            <para>An array of Amazon Resource Names (ARNs) for your VPC endpoint configurations.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Radios_Wifi">
            <summary>
            <para>
            <para>True if Wi-Fi is enabled at the beginning of the test; otherwise, false.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.SubmitDFTestRunCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.UpdateDFDeviceInstanceCmdlet">
            <summary>
            Updates information about an existing private device instance.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFDeviceInstanceCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the device instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFDeviceInstanceCmdlet.Label">
            <summary>
            <para>
            <para>An array of strings that you want to associate with the device instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFDeviceInstanceCmdlet.ProfileArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the profile that you want to associate with the
            device instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFDeviceInstanceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.UpdateDFDevicePoolCmdlet">
            <summary>
            Modifies the name, description, and rules in a device pool given the attributes and
            the pool ARN. Rule updates are all-or-nothing, meaning they can only be updated as
            a whole (or not at all).
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFDevicePoolCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the Device Farm device pool you wish to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFDevicePoolCmdlet.ClearMaxDevice">
            <summary>
            <para>
            <para>Sets whether the <code>maxDevices</code> parameter applies to your device pool. If
            you set this parameter to <code>true</code>, the <code>maxDevices</code> parameter
            does not apply, and Device Farm does not limit the number of devices that it adds
            to your device pool. In this case, Device Farm adds all available devices that meet
            the criteria that are specified for the <code>rules</code> parameter.</para><para>If you use this parameter in your request, you cannot use the <code>maxDevices</code>
            parameter in the same request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFDevicePoolCmdlet.Description">
            <summary>
            <para>
            <para>A description of the device pool you wish to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFDevicePoolCmdlet.MaxDevice">
            <summary>
            <para>
            <para>The number of devices that Device Farm can add to your device pool. Device Farm adds
            devices that are available and that meet the criteria that you assign for the <code>rules</code>
            parameter. Depending on how many devices meet these constraints, your device pool
            might contain fewer devices than the value for this parameter.</para><para>By specifying the maximum number of devices, you can control the costs that you incur
            by running tests.</para><para>If you use this parameter in your request, you cannot use the <code>clearMaxDevices</code>
            parameter in the same request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFDevicePoolCmdlet.Name">
            <summary>
            <para>
            <para>A string representing the name of the device pool you wish to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFDevicePoolCmdlet.Rule">
            <summary>
            <para>
            <para>Represents the rules you wish to modify for the device pool. Updating rules is optional;
            however, if you choose to update rules for your request, the update will replace the
            existing rules.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFDevicePoolCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.UpdateDFInstanceProfileCmdlet">
            <summary>
            Updates information about an existing private device instance profile.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFInstanceProfileCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the instance profile.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFInstanceProfileCmdlet.Description">
            <summary>
            <para>
            <para>The updated description for your instance profile.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFInstanceProfileCmdlet.ExcludeAppPackagesFromCleanup">
            <summary>
            <para>
            <para>An array of strings specifying the list of app packages that should not be cleaned
            up from the device after a test run is over.</para><para>The list of packages is only considered if you set <code>packageCleanup</code> to
            <code>true</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFInstanceProfileCmdlet.Name">
            <summary>
            <para>
            <para>The updated name for your instance profile.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFInstanceProfileCmdlet.PackageCleanup">
            <summary>
            <para>
            <para>The updated choice for whether you want to specify package cleanup. The default value
            is <code>false</code> for private devices.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFInstanceProfileCmdlet.RebootAfterUse">
            <summary>
            <para>
            <para>The updated choice for whether you want to reboot the device after use. The default
            value is <code>true</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFInstanceProfileCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet">
            <summary>
            Updates the network profile with specific settings.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the project for which you want to update network
            profile settings.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet.Description">
            <summary>
            <para>
            <para>The description of the network profile about which you are returning information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet.DownlinkBandwidthBit">
            <summary>
            <para>
            <para>The data throughput rate in bits per second, as an integer from 0 to 104857600.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet.DownlinkDelayMs">
            <summary>
            <para>
            <para>Delay time for all packets to destination in milliseconds as an integer from 0 to
            2000.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet.DownlinkJitterMs">
            <summary>
            <para>
            <para>Time variation in the delay of received packets in milliseconds as an integer from
            0 to 2000.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet.DownlinkLossPercent">
            <summary>
            <para>
            <para>Proportion of received packets that fail to arrive from 0 to 100 percent.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet.Name">
            <summary>
            <para>
            <para>The name of the network profile about which you are returning information.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet.Type">
            <summary>
            <para>
            <para>The type of network profile you wish to return information about. Valid values are
            listed below.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet.UplinkBandwidthBit">
            <summary>
            <para>
            <para>The data throughput rate in bits per second, as an integer from 0 to 104857600.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet.UplinkDelayMs">
            <summary>
            <para>
            <para>Delay time for all packets to destination in milliseconds as an integer from 0 to
            2000.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet.UplinkJitterMs">
            <summary>
            <para>
            <para>Time variation in the delay of received packets in milliseconds as an integer from
            0 to 2000.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet.UplinkLossPercent">
            <summary>
            <para>
            <para>Proportion of transmitted packets that fail to arrive from 0 to 100 percent.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFNetworkProfileCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.UpdateDFProjectCmdlet">
            <summary>
            Modifies the specified project name, given the project ARN and a new name.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFProjectCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the project whose name you wish to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFProjectCmdlet.DefaultJobTimeoutMinute">
            <summary>
            <para>
            <para>The number of minutes a test run in the project will execute before it times out.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFProjectCmdlet.Name">
            <summary>
            <para>
            <para>A string representing the new name of the project that you are updating.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFProjectCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.UpdateDFUploadCmdlet">
            <summary>
            Update an uploaded test specification (test spec).
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFUploadCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the uploaded test spec.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFUploadCmdlet.ContentType">
            <summary>
            <para>
            <para>The upload's content type (for example, "application/x-yaml").</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFUploadCmdlet.EditContent">
            <summary>
            <para>
            <para>Set to true if the YAML file has changed and needs to be updated; otherwise, set to
            false.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFUploadCmdlet.Name">
            <summary>
            <para>
            <para>The upload's test spec file name. The name should not contain the '/' character. The
            test spec file name must end with the <code>.yaml</code> or <code>.yml</code> file
            extension.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFUploadCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.DF.UpdateDFVPCEConfigurationCmdlet">
            <summary>
            Updates information about an existing Amazon Virtual Private Cloud (VPC) endpoint
            configuration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFVPCEConfigurationCmdlet.Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the VPC endpoint configuration you want to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFVPCEConfigurationCmdlet.ServiceDnsName">
            <summary>
            <para>
            <para>The DNS (domain) name used to connect to your private service in your Amazon VPC.
            The DNS name must not already be in use on the Internet.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFVPCEConfigurationCmdlet.VpceConfigurationDescription">
            <summary>
            <para>
            <para>An optional description, providing more details about your VPC endpoint configuration.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFVPCEConfigurationCmdlet.VpceConfigurationName">
            <summary>
            <para>
            <para>The friendly name you give to your VPC endpoint configuration, to manage your configurations
            more easily.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFVPCEConfigurationCmdlet.VpceServiceName">
            <summary>
            <para>
            <para>The name of the VPC endpoint service running inside your AWS account that you want
            Device Farm to test.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.DF.UpdateDFVPCEConfigurationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
    </members>
</doc>