AWS.Tools.ElasticLoadBalancing

4.0.3.0

AWS.Tools.ElasticLoadBalancing.XML

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>AWS.Tools.ElasticLoadBalancing</name>
    </assembly>
    <members>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.AddELBLoadBalancerToSubnetCmdlet">
            <summary>
            Adds one or more subnets to the set of configured subnets for the specified load balancer.
             
              
            <para>
            The load balancer evenly distributes requests across all registered subnets. For more
            information, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-manage-subnets.html">Add
            or Remove Subnets for Your Load Balancer in a VPC</a> in the <i>Classic Load Balancers
            Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.AddELBLoadBalancerToSubnetCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.AddELBLoadBalancerToSubnetCmdlet.Subnet">
            <summary>
            <para>
            <para>The IDs of the subnets to add. You can add only one subnet per Availability Zone.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.AddELBLoadBalancerToSubnetCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Subnets'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.AttachLoadBalancerToSubnetsResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.AttachLoadBalancerToSubnetsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.AddELBLoadBalancerToSubnetCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.AddELBLoadBalancerToSubnetCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.AddELBResourceTagCmdlet">
            <summary>
            Adds the specified tags to the specified load balancer. Each load balancer can have
            a maximum of 10 tags.
             
              
            <para>
            Each tag consists of a key and an optional value. If a tag with the same key is already
            associated with the load balancer, <code>AddTags</code> updates its value.
            </para><para>
            For more information, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/add-remove-tags.html">Tag
            Your Classic Load Balancer</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.AddELBResourceTagCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer. You can specify one load balancer only.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.AddELBResourceTagCmdlet.Tag">
            <summary>
            <para>
            <para>The tags.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.AddELBResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.AddTagsResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.AddELBResourceTagCmdlet.PassThru">
            <summary>
            Returns the collection of Tag objects that were added
            The -PassThru parameter is deprecated, use -Select instead. This parameter will be removed in future
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.AddELBResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.DisableELBAvailabilityZoneForLoadBalancerCmdlet">
            <summary>
            Removes the specified Availability Zones from the set of Availability Zones for the
            specified load balancer in EC2-Classic or a default VPC.
             
              
            <para>
            For load balancers in a non-default VPC, use <a>DetachLoadBalancerFromSubnets</a>.
            </para><para>
            There must be at least one Availability Zone registered with a load balancer at all
            times. After an Availability Zone is removed, all instances registered with the load
            balancer that are in the removed Availability Zone go into the <code>OutOfService</code>
            state. Then, the load balancer attempts to equally balance the traffic among its remaining
            Availability Zones.
            </para><para>
            For more information, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/enable-disable-az.html">Add
            or Remove Availability Zones</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.DisableELBAvailabilityZoneForLoadBalancerCmdlet.AvailabilityZone">
            <summary>
            <para>
            <para>The Availability Zones.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.DisableELBAvailabilityZoneForLoadBalancerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.DisableELBAvailabilityZoneForLoadBalancerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'AvailabilityZones'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.DisableAvailabilityZonesForLoadBalancerResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.DisableAvailabilityZonesForLoadBalancerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.DisableELBAvailabilityZoneForLoadBalancerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.DisableELBAvailabilityZoneForLoadBalancerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.DismountELBLoadBalancerFromSubnetCmdlet">
            <summary>
            Removes the specified subnets from the set of configured subnets for the load balancer.
             
              
            <para>
            After a subnet is removed, all EC2 instances registered with the load balancer in
            the removed subnet go into the <code>OutOfService</code> state. Then, the load balancer
            balances the traffic among the remaining routable subnets.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.DismountELBLoadBalancerFromSubnetCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.DismountELBLoadBalancerFromSubnetCmdlet.Subnet">
            <summary>
            <para>
            <para>The IDs of the subnets.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.DismountELBLoadBalancerFromSubnetCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Subnets'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.DetachLoadBalancerFromSubnetsResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.DetachLoadBalancerFromSubnetsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.DismountELBLoadBalancerFromSubnetCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.DismountELBLoadBalancerFromSubnetCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet">
            <summary>
            Modifies the attributes of the specified load balancer.
             
              
            <para>
            You can modify the load balancer attributes, such as <code>AccessLogs</code>, <code>ConnectionDraining</code>,
            and <code>CrossZoneLoadBalancing</code> by either enabling or disabling them. Or,
            you can modify the load balancer attribute <code>ConnectionSettings</code> by specifying
            an idle connection timeout value for your load balancer.
            </para><para>
            For more information, see the following in the <i>Classic Load Balancers Guide</i>:
            </para><ul><li><para><a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/enable-disable-crosszone-lb.html">Cross-Zone
            Load Balancing</a></para></li><li><para><a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/config-conn-drain.html">Connection
            Draining</a></para></li><li><para><a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/access-log-collection.html">Access
            Logs</a></para></li><li><para><a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/config-idle-timeout.html">Idle
            Connection Timeout</a></para></li></ul>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet.LoadBalancerAttributes_AdditionalAttribute">
            <summary>
            <para>
            <para>This parameter is reserved.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet.AccessLog_EmitInterval">
            <summary>
            <para>
            <para>The interval for publishing the access logs. You can specify an interval of either
            5 minutes or 60 minutes.</para><para>Default: 60 minutes</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet.AccessLog_Enabled">
            <summary>
            <para>
            <para>Specifies whether access logs are enabled for the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet.ConnectionDraining_Enabled">
            <summary>
            <para>
            <para>Specifies whether connection draining is enabled for the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet.CrossZoneLoadBalancing_Enabled">
            <summary>
            <para>
            <para>Specifies whether cross-zone load balancing is enabled for the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet.ConnectionSettings_IdleTimeout">
            <summary>
            <para>
            <para>The time, in seconds, that the connection is allowed to be idle (no data has been
            sent over the connection) before it is closed by the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet.AccessLog_S3BucketName">
            <summary>
            <para>
            <para>The name of the Amazon S3 bucket where the access logs are stored.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet.AccessLog_S3BucketPrefix">
            <summary>
            <para>
            <para>The logical hierarchy you created for your Amazon S3 bucket, for example <code>my-bucket-prefix/prod</code>.
            If the prefix is not provided, the log is placed at the root level of the bucket.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet.ConnectionDraining_Timeout">
            <summary>
            <para>
            <para>The maximum time, in seconds, to keep the existing connections open before deregistering
            the instances.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.ModifyLoadBalancerAttributesResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.ModifyLoadBalancerAttributesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EditELBLoadBalancerAttributeCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.EnableELBAvailabilityZoneForLoadBalancerCmdlet">
            <summary>
            Adds the specified Availability Zones to the set of Availability Zones for the specified
            load balancer in EC2-Classic or a default VPC.
             
              
            <para>
            For load balancers in a non-default VPC, use <a>AttachLoadBalancerToSubnets</a>.
            </para><para>
            The load balancer evenly distributes requests across all its registered Availability
            Zones that contain instances. For more information, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/enable-disable-az.html">Add
            or Remove Availability Zones</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EnableELBAvailabilityZoneForLoadBalancerCmdlet.AvailabilityZone">
            <summary>
            <para>
            <para>The Availability Zones. These must be in the same region as the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EnableELBAvailabilityZoneForLoadBalancerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EnableELBAvailabilityZoneForLoadBalancerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'AvailabilityZones'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.EnableAvailabilityZonesForLoadBalancerResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.EnableAvailabilityZonesForLoadBalancerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EnableELBAvailabilityZoneForLoadBalancerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.EnableELBAvailabilityZoneForLoadBalancerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.GetELBAccountLimitCmdlet">
            <summary>
            Describes the current Elastic Load Balancing resource limits for your AWS account.
             
              
            <para>
            For more information, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-limits.html">Limits
            for Your Classic Load Balancer</a> in the <i>Classic Load Balancers Guide</i>.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBAccountLimitCmdlet.Marker">
            <summary>
            <para>
            <para>The marker for the next set of results. (You received this marker from a previous
            call.)</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.NextMarker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBAccountLimitCmdlet.PageSize">
            <summary>
            <para>
            <para>The maximum number of results to return with this call.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBAccountLimitCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Limits'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.DescribeAccountLimitsResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.DescribeAccountLimitsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBAccountLimitCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.GetELBInstanceHealthCmdlet">
            <summary>
            Describes the state of the specified instances with respect to the specified load
            balancer. If no instances are specified, the call describes the state of all instances
            that are currently registered with the load balancer. If instances are specified,
            their state is returned even if they are no longer registered with the load balancer.
            The state of terminated instances is not returned.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBInstanceHealthCmdlet.Instance">
            <summary>
            <para>
            <para>The IDs of the instances.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBInstanceHealthCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBInstanceHealthCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'InstanceStates'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.DescribeInstanceHealthResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.DescribeInstanceHealthResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBInstanceHealthCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerCmdlet">
            <summary>
            Describes the specified the load balancers. If no load balancers are specified, the
            call describes all of your load balancers.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The names of the load balancers.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerCmdlet.Marker">
            <summary>
            <para>
            <para>The marker for the next set of results. (You received this marker from a previous
            call.)</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.NextMarker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerCmdlet.PageSize">
            <summary>
            <para>
            <para>The maximum number of results to return with this call (a number from 1 to 400). The
            default is 400.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'LoadBalancerDescriptions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.DescribeLoadBalancersResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.DescribeLoadBalancersResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerAttributeCmdlet">
            <summary>
            Describes the attributes for the specified load balancer.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerAttributeCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerAttributeCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'LoadBalancerAttributes'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.DescribeLoadBalancerAttributesResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.DescribeLoadBalancerAttributesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerAttributeCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerPolicyCmdlet">
            <summary>
            Describes the specified policies.
             
              
            <para>
            If you specify a load balancer name, the action returns the descriptions of all policies
            created for the load balancer. If you specify a policy name associated with your load
            balancer, the action returns the description of that policy. If you don't specify
            a load balancer name, the action returns descriptions of the specified sample policies,
            or descriptions of all sample policies. The names of the sample policies have the
            <code>ELBSample-</code> prefix.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerPolicyCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerPolicyCmdlet.PolicyName">
            <summary>
            <para>
            <para>The names of the policies.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'PolicyDescriptions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.DescribeLoadBalancerPoliciesResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.DescribeLoadBalancerPoliciesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerPolicyTypeCmdlet">
            <summary>
            Describes the specified load balancer policy types or all load balancer policy types.
             
              
            <para>
            The description of each type indicates how it can be used. For example, some policies
            can be used only with layer 7 listeners, some policies can be used only with layer
            4 listeners, and some policies can be used only with your EC2 instances.
            </para><para>
            You can use <a>CreateLoadBalancerPolicy</a> to create a policy configuration for any
            of these policy types. Then, depending on the policy type, use either <a>SetLoadBalancerPoliciesOfListener</a>
            or <a>SetLoadBalancerPoliciesForBackendServer</a> to set the policy.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerPolicyTypeCmdlet.PolicyTypeName">
            <summary>
            <para>
            <para>The names of the policy types. If no names are specified, describes all policy types
            defined by Elastic Load Balancing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerPolicyTypeCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'PolicyTypeDescriptions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.DescribeLoadBalancerPolicyTypesResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.DescribeLoadBalancerPolicyTypesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBLoadBalancerPolicyTypeCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the PolicyTypeName parameter.
            The -PassThru parameter is deprecated, use -Select '^PolicyTypeName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.GetELBResourceTagCmdlet">
            <summary>
            Describes the tags associated with the specified load balancers.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBResourceTagCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The names of the load balancers.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TagDescriptions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.DescribeTagsResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.DescribeTagsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.GetELBResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.JoinELBSecurityGroupToLoadBalancerCmdlet">
            <summary>
            Associates one or more security groups with your load balancer in a virtual private
            cloud (VPC). The specified security groups override the previously associated security
            groups.
             
              
            <para>
            For more information, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-security-groups.html#elb-vpc-security-groups">Security
            Groups for Load Balancers in a VPC</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.JoinELBSecurityGroupToLoadBalancerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.JoinELBSecurityGroupToLoadBalancerCmdlet.SecurityGroup">
            <summary>
            <para>
            <para>The IDs of the security groups to associate with the load balancer. Note that you
            cannot specify the name of the security group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.JoinELBSecurityGroupToLoadBalancerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SecurityGroups'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.ApplySecurityGroupsToLoadBalancerResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.ApplySecurityGroupsToLoadBalancerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.JoinELBSecurityGroupToLoadBalancerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.JoinELBSecurityGroupToLoadBalancerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.NewELBAppCookieStickinessPolicyCmdlet">
            <summary>
            Generates a stickiness policy with sticky session lifetimes that follow that of an
            application-generated cookie. This policy can be associated only with HTTP/HTTPS listeners.
             
              
            <para>
            This policy is similar to the policy created by <a>CreateLBCookieStickinessPolicy</a>,
            except that the lifetime of the special Elastic Load Balancing cookie, <code>AWSELB</code>,
            follows the lifetime of the application-generated cookie specified in the policy configuration.
            The load balancer only inserts a new stickiness cookie when the application response
            includes a new application cookie.
            </para><para>
            If the application cookie is explicitly removed or expires, the session stops being
            sticky until a new application cookie is issued.
            </para><para>
            For more information, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-sticky-sessions.html#enable-sticky-sessions-application">Application-Controlled
            Session Stickiness</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBAppCookieStickinessPolicyCmdlet.CookieName">
            <summary>
            <para>
            <para>The name of the application cookie used for stickiness.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBAppCookieStickinessPolicyCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBAppCookieStickinessPolicyCmdlet.PolicyName">
            <summary>
            <para>
            <para>The name of the policy being created. Policy names must consist of alphanumeric characters
            and dashes (-). This name must be unique within the set of policies for this load
            balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBAppCookieStickinessPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.CreateAppCookieStickinessPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBAppCookieStickinessPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBAppCookieStickinessPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.NewELBLBCookieStickinessPolicyCmdlet">
            <summary>
            Generates a stickiness policy with sticky session lifetimes controlled by the lifetime
            of the browser (user-agent) or a specified expiration period. This policy can be associated
            only with HTTP/HTTPS listeners.
             
              
            <para>
            When a load balancer implements this policy, the load balancer uses a special cookie
            to track the instance for each request. When the load balancer receives a request,
            it first checks to see if this cookie is present in the request. If so, the load balancer
            sends the request to the application server specified in the cookie. If not, the load
            balancer sends the request to a server that is chosen based on the existing load-balancing
            algorithm.
            </para><para>
            A cookie is inserted into the response for binding subsequent requests from the same
            user to that server. The validity of the cookie is based on the cookie expiration
            time, which is specified in the policy configuration.
            </para><para>
            For more information, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-sticky-sessions.html#enable-sticky-sessions-duration">Duration-Based
            Session Stickiness</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLBCookieStickinessPolicyCmdlet.CookieExpirationPeriod">
            <summary>
            <para>
            <para>The time period, in seconds, after which the cookie should be considered stale. If
            you do not specify this parameter, the default value is 0, which indicates that the
            sticky session should last for the duration of the browser session.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLBCookieStickinessPolicyCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLBCookieStickinessPolicyCmdlet.PolicyName">
            <summary>
            <para>
            <para>The name of the policy being created. Policy names must consist of alphanumeric characters
            and dashes (-). This name must be unique within the set of policies for this load
            balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLBCookieStickinessPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.CreateLBCookieStickinessPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLBCookieStickinessPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLBCookieStickinessPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerCmdlet">
            <summary>
            Creates a Classic Load Balancer.
             
              
            <para>
            You can add listeners, security groups, subnets, and tags when you create your load
            balancer, or you can add them later using <a>CreateLoadBalancerListeners</a>, <a>ApplySecurityGroupsToLoadBalancer</a>,
            <a>AttachLoadBalancerToSubnets</a>, and <a>AddTags</a>.
            </para><para>
            To describe your current load balancers, see <a>DescribeLoadBalancers</a>. When you
            are finished with a load balancer, you can delete it using <a>DeleteLoadBalancer</a>.
            </para><para>
            You can create up to 20 load balancers per region per account. You can request an
            increase for the number of load balancers for your account. For more information,
            see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-limits.html">Limits
            for Your Classic Load Balancer</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerCmdlet.AvailabilityZone">
            <summary>
            <para>
            <para>One or more Availability Zones from the same region as the load balancer.</para><para>You must specify at least one Availability Zone.</para><para>You can add more Availability Zones after you create the load balancer using <a>EnableAvailabilityZonesForLoadBalancer</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerCmdlet.Listener">
            <summary>
            <para>
            <para>The listeners.</para><para>For more information, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-listener-config.html">Listeners
            for Your Classic Load Balancer</a> in the <i>Classic Load Balancers Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para><para>This name must be unique within your set of load balancers for the region, must have
            a maximum of 32 characters, must contain only alphanumeric characters or hyphens,
            and cannot begin or end with a hyphen.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerCmdlet.Scheme">
            <summary>
            <para>
            <para>The type of a load balancer. Valid only for load balancers in a VPC.</para><para>By default, Elastic Load Balancing creates an Internet-facing load balancer with a
            DNS name that resolves to public IP addresses. For more information about Internet-facing
            and Internal load balancers, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/userguide/how-elastic-load-balancing-works.html#load-balancer-scheme">Load
            Balancer Scheme</a> in the <i>Elastic Load Balancing User Guide</i>.</para><para>Specify <code>internal</code> to create a load balancer with a DNS name that resolves
            to private IP addresses.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerCmdlet.SecurityGroup">
            <summary>
            <para>
            <para>The IDs of the security groups to assign to the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerCmdlet.Subnet">
            <summary>
            <para>
            <para>The IDs of the subnets in your VPC to attach to the load balancer. Specify one subnet
            per Availability Zone specified in <code>AvailabilityZones</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerCmdlet.Tag">
            <summary>
            <para>
            <para>A list of tags to assign to the load balancer.</para><para>For more information about tagging your load balancer, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/add-remove-tags.html">Tag
            Your Classic Load Balancer</a> in the <i>Classic Load Balancers Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DNSName'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.CreateLoadBalancerResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.CreateLoadBalancerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerListenerCmdlet">
            <summary>
            Creates one or more listeners for the specified load balancer. If a listener with
            the specified port does not already exist, it is created; otherwise, the properties
            of the new listener must match the properties of the existing listener.
             
              
            <para>
            For more information, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-listener-config.html">Listeners
            for Your Classic Load Balancer</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerListenerCmdlet.Listener">
            <summary>
            <para>
            <para>The listeners.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerListenerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerListenerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.CreateLoadBalancerListenersResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerListenerCmdlet.PassThru">
            <summary>
            Returns the collection of Listener objects that were created
            The -PassThru parameter is deprecated, use -Select instead. This parameter will be removed in future
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerListenerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerPolicyCmdlet">
            <summary>
            Creates a policy with the specified attributes for the specified load balancer.
             
              
            <para>
            Policies are settings that are saved for your load balancer and that can be applied
            to the listener or the application server, depending on the policy type.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerPolicyCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerPolicyCmdlet.PolicyAttribute">
            <summary>
            <para>
            <para>The policy attributes.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerPolicyCmdlet.PolicyName">
            <summary>
            <para>
            <para>The name of the load balancer policy to be created. This name must be unique within
            the set of policies for this load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerPolicyCmdlet.PolicyTypeName">
            <summary>
            <para>
            <para>The name of the base policy type. To get the list of policy types, use <a>DescribeLoadBalancerPolicyTypes</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.CreateLoadBalancerPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.NewELBLoadBalancerPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.RegisterELBInstanceWithLoadBalancerCmdlet">
            <summary>
            Adds the specified instances to the specified load balancer.
             
              
            <para>
            The instance must be a running instance in the same network as the load balancer (EC2-Classic
            or the same VPC). If you have EC2-Classic instances and a load balancer in a VPC with
            ClassicLink enabled, you can link the EC2-Classic instances to that VPC and then register
            the linked EC2-Classic instances with the load balancer in the VPC.
            </para><para>
            Note that <code>RegisterInstanceWithLoadBalancer</code> completes when the request
            has been registered. Instance registration takes a little time to complete. To check
            the state of the registered instances, use <a>DescribeLoadBalancers</a> or <a>DescribeInstanceHealth</a>.
            </para><para>
            After the instance is registered, it starts receiving traffic and requests from the
            load balancer. Any instance that is not in one of the Availability Zones registered
            for the load balancer is moved to the <code>OutOfService</code> state. If an Availability
            Zone is added to the load balancer later, any instances registered with the load balancer
            move to the <code>InService</code> state.
            </para><para>
            To deregister instances from a load balancer, use <a>DeregisterInstancesFromLoadBalancer</a>.
            </para><para>
            For more information, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-deregister-register-instances.html">Register
            or De-Register EC2 Instances</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RegisterELBInstanceWithLoadBalancerCmdlet.Instance">
            <summary>
            <para>
            <para>The IDs of the instances.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RegisterELBInstanceWithLoadBalancerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RegisterELBInstanceWithLoadBalancerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Instances'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.RegisterInstancesWithLoadBalancerResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.RegisterInstancesWithLoadBalancerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RegisterELBInstanceWithLoadBalancerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RegisterELBInstanceWithLoadBalancerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.RemoveELBInstanceFromLoadBalancerCmdlet">
            <summary>
            Deregisters the specified instances from the specified load balancer. After the instance
            is deregistered, it no longer receives traffic from the load balancer.
             
              
            <para>
            You can use <a>DescribeLoadBalancers</a> to verify that the instance is deregistered
            from the load balancer.
            </para><para>
            For more information, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-deregister-register-instances.html">Register
            or De-Register EC2 Instances</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBInstanceFromLoadBalancerCmdlet.Instance">
            <summary>
            <para>
            <para>The IDs of the instances.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBInstanceFromLoadBalancerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBInstanceFromLoadBalancerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Instances'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.DeregisterInstancesFromLoadBalancerResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.DeregisterInstancesFromLoadBalancerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBInstanceFromLoadBalancerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBInstanceFromLoadBalancerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerCmdlet">
            <summary>
            Deletes the specified load balancer.
             
              
            <para>
            If you are attempting to recreate a load balancer, you must reconfigure all settings.
            The DNS name associated with a deleted load balancer are no longer usable. The name
            and associated DNS record of the deleted load balancer no longer exist and traffic
            sent to any of its IP addresses is no longer delivered to your instances.
            </para><para>
            If the load balancer does not exist or has already been deleted, the call to <code>DeleteLoadBalancer</code>
            still succeeds.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.DeleteLoadBalancerResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerListenerCmdlet">
            <summary>
            Deletes the specified listeners from the specified load balancer.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerListenerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerListenerCmdlet.LoadBalancerPort">
            <summary>
            <para>
            <para>The client port numbers of the listeners.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerListenerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.DeleteLoadBalancerListenersResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerListenerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerListenerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerPolicyCmdlet">
            <summary>
            Deletes the specified policy from the specified load balancer. This policy must not
            be enabled for any listeners.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerPolicyCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerPolicyCmdlet.PolicyName">
            <summary>
            <para>
            <para>The name of the policy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.DeleteLoadBalancerPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBLoadBalancerPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.RemoveELBResourceTagCmdlet">
            <summary>
            Removes one or more tags from the specified load balancer.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBResourceTagCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer. You can specify a maximum of one load balancer name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBResourceTagCmdlet.Tag">
            <summary>
            <para>
            <para>The list of tag keys to remove.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.RemoveTagsResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBResourceTagCmdlet.PassThru">
            <summary>
            Returns the collection of tag keys that were removed
            The -PassThru parameter is deprecated, use -Select instead. This parameter will be removed in future
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.RemoveELBResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.SetELBHealthCheckCmdlet">
            <summary>
            Specifies the health check settings to use when evaluating the health state of your
            EC2 instances.
             
              
            <para>
            For more information, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-healthchecks.html">Configure
            Health Checks for Your Load Balancer</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBHealthCheckCmdlet.HealthCheck_HealthyThreshold">
            <summary>
            <para>
            <para>The number of consecutive health checks successes required before moving the instance
            to the <code>Healthy</code> state.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBHealthCheckCmdlet.HealthCheck_Interval">
            <summary>
            <para>
            <para>The approximate interval, in seconds, between health checks of an individual instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBHealthCheckCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBHealthCheckCmdlet.HealthCheck_Target">
            <summary>
            <para>
            <para>The instance being checked. The protocol is either TCP, HTTP, HTTPS, or SSL. The range
            of valid ports is one (1) through 65535.</para><para>TCP is the default, specified as a TCP: port pair, for example "TCP:5000". In this
            case, a health check simply attempts to open a TCP connection to the instance on the
            specified port. Failure to connect within the configured timeout is considered unhealthy.</para><para>SSL is also specified as SSL: port pair, for example, SSL:5000.</para><para>For HTTP/HTTPS, you must include a ping path in the string. HTTP is specified as a
            HTTP:port;/;PathToPing; grouping, for example "HTTP:80/weather/us/wa/seattle". In
            this case, a HTTP GET request is issued to the instance on the given port and path.
            Any answer other than "200 OK" within the timeout period is considered unhealthy.</para><para>The total length of the HTTP ping target must be 1024 16-bit Unicode characters or
            less.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBHealthCheckCmdlet.HealthCheck_Timeout">
            <summary>
            <para>
            <para>The amount of time, in seconds, during which no response means a failed health check.</para><para>This value must be less than the <code>Interval</code> value.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBHealthCheckCmdlet.HealthCheck_UnhealthyThreshold">
            <summary>
            <para>
            <para>The number of consecutive health check failures required before moving the instance
            to the <code>Unhealthy</code> state.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBHealthCheckCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'HealthCheck'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.ConfigureHealthCheckResponse).
            Specifying the name of a property of type Amazon.ElasticLoadBalancing.Model.ConfigureHealthCheckResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBHealthCheckCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBHealthCheckCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerListenerSSLCertificateCmdlet">
            <summary>
            Sets the certificate that terminates the specified listener's SSL connections. The
            specified certificate replaces any prior certificate that was used on the same load
            balancer and port.
             
              
            <para>
            For more information about updating your SSL certificate, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-update-ssl-cert.html">Replace
            the SSL Certificate for Your Load Balancer</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerListenerSSLCertificateCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerListenerSSLCertificateCmdlet.LoadBalancerPort">
            <summary>
            <para>
            <para>The port that uses the specified SSL certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerListenerSSLCertificateCmdlet.SSLCertificateId">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the SSL certificate.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerListenerSSLCertificateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.SetLoadBalancerListenerSSLCertificateResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerListenerSSLCertificateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerListenerSSLCertificateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyForBackendServerCmdlet">
            <summary>
            Replaces the set of policies associated with the specified port on which the EC2 instance
            is listening with a new set of policies. At this time, only the back-end server authentication
            policy type can be applied to the instance ports; this policy type is composed of
            multiple public key policies.
             
              
            <para>
            Each time you use <code>SetLoadBalancerPoliciesForBackendServer</code> to enable the
            policies, use the <code>PolicyNames</code> parameter to list the policies that you
            want to enable.
            </para><para>
            You can use <a>DescribeLoadBalancers</a> or <a>DescribeLoadBalancerPolicies</a> to
            verify that the policy is associated with the EC2 instance.
            </para><para>
            For more information about enabling back-end instance authentication, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-create-https-ssl-load-balancer.html#configure_backendauth_clt">Configure
            Back-end Instance Authentication</a> in the <i>Classic Load Balancers Guide</i>. For
            more information about Proxy Protocol, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/enable-proxy-protocol.html">Configure
            Proxy Protocol Support</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyForBackendServerCmdlet.InstancePort">
            <summary>
            <para>
            <para>The port number associated with the EC2 instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyForBackendServerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyForBackendServerCmdlet.PolicyName">
            <summary>
            <para>
            <para>The names of the policies. If the list is empty, then all current polices are removed
            from the EC2 instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyForBackendServerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.SetLoadBalancerPoliciesForBackendServerResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyForBackendServerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyForBackendServerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyOfListenerCmdlet">
            <summary>
            Replaces the current set of policies for the specified load balancer port with the
            specified set of policies.
             
              
            <para>
            To enable back-end server authentication, use <a>SetLoadBalancerPoliciesForBackendServer</a>.
            </para><para>
            For more information about setting policies, see <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/ssl-config-update.html">Update
            the SSL Negotiation Configuration</a>, <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-sticky-sessions.html#enable-sticky-sessions-duration">Duration-Based
            Session Stickiness</a>, and <a href="http://docs.aws.amazon.com/elasticloadbalancing/latest/classic/elb-sticky-sessions.html#enable-sticky-sessions-application">Application-Controlled
            Session Stickiness</a> in the <i>Classic Load Balancers Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyOfListenerCmdlet.LoadBalancerName">
            <summary>
            <para>
            <para>The name of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyOfListenerCmdlet.LoadBalancerPort">
            <summary>
            <para>
            <para>The external port of the load balancer.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyOfListenerCmdlet.PolicyName">
            <summary>
            <para>
            <para>The names of the policies. This list must include all policies to be enabled. If you
            omit a policy that is currently enabled, it is disabled. If the list is empty, all
            current policies are disabled.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyOfListenerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticLoadBalancing.Model.SetLoadBalancerPoliciesOfListenerResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyOfListenerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LoadBalancerName parameter.
            The -PassThru parameter is deprecated, use -Select '^LoadBalancerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.ELB.SetELBLoadBalancerPolicyOfListenerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
    </members>
</doc>