AWS.Tools.ElasticMapReduce.XML

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>AWS.Tools.ElasticMapReduce</name>
    </assembly>
    <members>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet">
            <summary>
            Adds an instance fleet to a running cluster.
             
             <note><para>
            The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and
            later, excluding 5.0.x.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.OnDemandSpecification_AllocationStrategy">
            <summary>
            <para>
            <para>Specifies the strategy to use in launching On-Demand instance fleets. Currently, the
            only option is <c>lowest-price</c> (the default), which launches the lowest price
            first.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotSpecification_AllocationStrategy">
            <summary>
            <para>
            <para>Specifies one of the following strategies to launch Spot Instance fleets: <c>price-capacity-optimized</c>,
            <c>capacity-optimized</c>, <c>lowest-price</c>, or <c>diversified</c>. For more information
            on the provisioning strategies, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ec2-fleet-allocation-strategy.html">Allocation
            strategies for Spot Instances</a> in the <i>Amazon EC2 User Guide for Linux Instances</i>.</para><note><para>When you launch a Spot Instance fleet with the old console, it automatically launches
            with the <c>capacity-optimized</c> strategy. You can't change the allocation strategy
            from the old console.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotSpecification_BlockDurationMinute">
            <summary>
            <para>
            <para>The defined duration for Spot Instances (also known as Spot blocks) in minutes. When
            specified, the Spot Instance does not terminate before the defined duration expires,
            and defined duration pricing for Spot Instances applies. Valid values are 60, 120,
            180, 240, 300, or 360. The duration period starts as soon as a Spot Instance receives
            its instance ID. At the end of the duration, Amazon EC2 marks the Spot Instance for
            termination and provides a Spot Instance termination notice, which gives the instance
            a two-minute warning before it terminates. </para><note><para>Spot Instances with a defined duration (also known as Spot blocks) are no longer available
            to new customers from July 1, 2021. For customers who have previously used the feature,
            we will continue to support Spot Instances with a defined duration until December
            31, 2022. </para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.CapacityReservationOptions_CapacityReservationPreference">
            <summary>
            <para>
            <para>Indicates the instance's Capacity Reservation preferences. Possible preferences include:</para><ul><li><para><c>open</c> - The instance can run in any open Capacity Reservation that has matching
            attributes (instance type, platform, Availability Zone).</para></li><li><para><c>none</c> - The instance avoids running in a Capacity Reservation even if one is
            available. The instance runs as an On-Demand Instance.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.CapacityReservationOptions_CapacityReservationResourceGroupArn">
            <summary>
            <para>
            <para>The ARN of the Capacity Reservation resource group in which to run the instance.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.ClusterId">
            <summary>
            <para>
            <para>The unique identifier of the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_InstanceFleetType">
            <summary>
            <para>
            <para>The node type that the instance fleet hosts. Valid values are MASTER, CORE, and TASK.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_InstanceTypeConfig">
            <summary>
            <para>
            <para>The instance type configurations that define the Amazon EC2 instances in the instance
            fleet.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_Name">
            <summary>
            <para>
            <para>The friendly name of the instance fleet.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_TargetOnDemandCapacity">
            <summary>
            <para>
            <para>The target capacity of On-Demand units for the instance fleet, which determines how
            many On-Demand Instances to provision. When the instance fleet launches, Amazon EMR
            tries to provision On-Demand Instances as specified by <a>InstanceTypeConfig</a>.
            Each instance configuration has a specified <c>WeightedCapacity</c>. When an On-Demand
            Instance is provisioned, the <c>WeightedCapacity</c> units count toward the target
            capacity. Amazon EMR provisions instances until the target capacity is totally fulfilled,
            even if this results in an overage. For example, if there are 2 units remaining to
            fulfill capacity, and Amazon EMR can only provision an instance with a <c>WeightedCapacity</c>
            of 5 units, the instance is provisioned, and the target capacity is exceeded by 3
            units.</para><note><para>If not specified or set to 0, only Spot Instances are provisioned for the instance
            fleet using <c>TargetSpotCapacity</c>. At least one of <c>TargetSpotCapacity</c> and
            <c>TargetOnDemandCapacity</c> should be greater than 0. For a master instance fleet,
            only one of <c>TargetSpotCapacity</c> and <c>TargetOnDemandCapacity</c> can be specified,
            and its value must be 1.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_TargetSpotCapacity">
            <summary>
            <para>
            <para>The target capacity of Spot units for the instance fleet, which determines how many
            Spot Instances to provision. When the instance fleet launches, Amazon EMR tries to
            provision Spot Instances as specified by <a>InstanceTypeConfig</a>. Each instance
            configuration has a specified <c>WeightedCapacity</c>. When a Spot Instance is provisioned,
            the <c>WeightedCapacity</c> units count toward the target capacity. Amazon EMR provisions
            instances until the target capacity is totally fulfilled, even if this results in
            an overage. For example, if there are 2 units remaining to fulfill capacity, and Amazon
            EMR can only provision an instance with a <c>WeightedCapacity</c> of 5 units, the
            instance is provisioned, and the target capacity is exceeded by 3 units.</para><note><para>If not specified or set to 0, only On-Demand Instances are provisioned for the instance
            fleet. At least one of <c>TargetSpotCapacity</c> and <c>TargetOnDemandCapacity</c>
            should be greater than 0. For a master instance fleet, only one of <c>TargetSpotCapacity</c>
            and <c>TargetOnDemandCapacity</c> can be specified, and its value must be 1.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotSpecification_TimeoutAction">
            <summary>
            <para>
            <para>The action to take when <c>TargetSpotCapacity</c> has not been fulfilled when the
            <c>TimeoutDurationMinutes</c> has expired; that is, when all Spot Instances could
            not be provisioned within the Spot provisioning timeout. Valid values are <c>TERMINATE_CLUSTER</c>
            and <c>SWITCH_TO_ON_DEMAND</c>. SWITCH_TO_ON_DEMAND specifies that if no Spot Instances
            are available, On-Demand Instances should be provisioned to fulfill any remaining
            Spot capacity.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotSpecification_TimeoutDurationMinute">
            <summary>
            <para>
            <para>The Spot provisioning timeout period in minutes. If Spot Instances are not provisioned
            within this time period, the <c>TimeOutAction</c> is taken. Minimum value is 5 and
            maximum value is 1440. The timeout applies only during initial provisioning, when
            the cluster is first created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.OnDemandResizeSpecification_TimeoutDurationMinute">
            <summary>
            <para>
            <para>On-Demand resize timeout in minutes. If On-Demand Instances are not provisioned within
            this time, the resize workflow stops. The minimum value is 5 minutes, and the maximum
            value is 10,080 minutes (7 days). The timeout applies to all resize workflows on the
            Instance Fleet. The resize could be triggered by Amazon EMR Managed Scaling or by
            the customer (via Amazon EMR Console, Amazon EMR CLI modify-instance-fleet or Amazon
            EMR SDK ModifyInstanceFleet API) or by Amazon EMR due to Amazon EC2 Spot Reclamation.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotResizeSpecification_TimeoutDurationMinute">
            <summary>
            <para>
            <para>Spot resize timeout in minutes. If Spot Instances are not provisioned within this
            time, the resize workflow will stop provisioning of Spot instances. Minimum value
            is 5 minutes and maximum value is 10,080 minutes (7 days). The timeout applies to
            all resize workflows on the Instance Fleet. The resize could be triggered by Amazon
            EMR Managed Scaling or by the customer (via Amazon EMR Console, Amazon EMR CLI modify-instance-fleet
            or Amazon EMR SDK ModifyInstanceFleet API) or by Amazon EMR due to Amazon EC2 Spot
            Reclamation.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.CapacityReservationOptions_UsageStrategy">
            <summary>
            <para>
            <para>Indicates whether to use unused Capacity Reservations for fulfilling On-Demand capacity.</para><para>If you specify <c>use-capacity-reservations-first</c>, the fleet uses unused Capacity
            Reservations to fulfill On-Demand capacity up to the target On-Demand capacity. If
            multiple instance pools have unused Capacity Reservations, the On-Demand allocation
            strategy (<c>lowest-price</c>) is applied. If the number of unused Capacity Reservations
            is less than the On-Demand target capacity, the remaining On-Demand target capacity
            is launched according to the On-Demand allocation strategy (<c>lowest-price</c>).</para><para>If you do not specify a value, the fleet fulfills the On-Demand capacity according
            to the chosen On-Demand allocation strategy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.AddInstanceFleetResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.AddInstanceFleetResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet">
            <summary>
            Adds one or more instance groups to a running cluster.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.InstanceGroup">
            <summary>
            <para>
            <para>Instance groups to add.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.JobFlowId">
            <summary>
            <para>
            <para>Job flow in which to add the instance groups.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.AddInstanceGroupsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.AddInstanceGroupsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the JobFlowId parameter.
            The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet">
            <summary>
            AddJobFlowSteps adds new steps to a running cluster. A maximum of 256 steps are allowed
            in each job flow.
             
              
            <para>
            If your cluster is long-running (such as a Hive data warehouse) or complex, you may
            require more than 256 steps to process your data. You can bypass the 256-step limitation
            in various ways, including using SSH to connect to the master node and submitting
            queries directly to the software running on the master node, such as Hive and Hadoop.
            </para><para>
            A step specifies the location of a JAR file stored either on the master node of the
            cluster or in Amazon S3. Each step is performed by the main function of the main class
            of the JAR file. The main class can be specified either in the manifest of the JAR
            or by using the MainFunction parameter of the step.
            </para><para>
            Amazon EMR executes each step in the order listed. For a step to be considered complete,
            the main function must exit with a zero exit code and all Hadoop jobs started while
            the step was running must have completed and run successfully.
            </para><para>
            You can only add steps to a cluster that is in one of the following states: STARTING,
            BOOTSTRAPPING, RUNNING, or WAITING.
            </para><note><para>
            The string values passed into <c>HadoopJarStep</c> object cannot exceed a total of
            10240 characters.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.ExecutionRoleArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the runtime role for a step on the cluster. The
            runtime role can be a cross-account IAM role. The runtime role ARN is a combination
            of account ID, role name, and role type using the following format: <c>arn:partition:service:region:account:resource</c>.
            </para><para>For example, <c>arn:aws:IAM::1234567890:role/ReadOnly</c> is a correctly formatted
            runtime role ARN.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.JobFlowId">
            <summary>
            <para>
            <para>A string that uniquely identifies the job flow. This identifier is returned by <a>RunJobFlow</a>
            and can also be obtained from <a>ListClusters</a>. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.Step">
            <summary>
            <para>
            <para> A list of <a>StepConfig</a> to be executed by the job flow. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'StepIds'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.AddJobFlowStepsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.AddJobFlowStepsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the JobFlowId parameter.
            The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet">
            <summary>
            Adds tags to an Amazon EMR resource, such as a cluster or an Amazon EMR Studio. Tags
            make it easier to associate resources in various ways, such as grouping clusters to
            track your Amazon EMR resource allocation costs. For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-tags.html">Tag
            Clusters</a>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.ResourceId">
            <summary>
            <para>
            <para>The Amazon EMR resource identifier to which tags will be added. For example, a cluster
            identifier or an Amazon EMR Studio ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.Tag">
            <summary>
            <para>
            <para>A list of tags to associate with a resource. Tags are user-defined key-value pairs
            that consist of a required key string with a maximum of 128 characters, and an optional
            value string with a maximum of 256 characters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.AddTagsResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.PassThru">
            <summary>
            Returns the collection of Tag objects that were added
            The -PassThru parameter is deprecated, use -Select instead. This parameter will be removed in future
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet">
            <summary>
            Modifies the number of steps that can be executed concurrently for the cluster specified
            using ClusterID.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.ClusterId">
            <summary>
            <para>
            <para>The unique identifier of the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.StepConcurrencyLevel">
            <summary>
            <para>
            <para>The number of steps that can be executed concurrently. You can specify a minimum of
            1 step and a maximum of 256 steps. We recommend that you do not change this parameter
            while steps are running or the <c>ActionOnFailure</c> setting may not behave as expected.
            For more information see <a>Step$ActionOnFailure</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'StepConcurrencyLevel'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ModifyClusterResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ModifyClusterResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet">
            <summary>
            Modifies the target On-Demand and target Spot capacities for the instance fleet with
            the specified InstanceFleetID within the cluster specified using ClusterID. The call
            either succeeds or fails atomically.
             
             <note><para>
            The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and
            later, excluding 5.0.x versions.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.ClusterId">
            <summary>
            <para>
            <para>The unique identifier of the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.InstanceFleet_InstanceFleetId">
            <summary>
            <para>
            <para>A unique identifier for the instance fleet.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.InstanceFleet_TargetOnDemandCapacity">
            <summary>
            <para>
            <para>The target capacity of On-Demand units for the instance fleet. For more information
            see <a>InstanceFleetConfig$TargetOnDemandCapacity</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.InstanceFleet_TargetSpotCapacity">
            <summary>
            <para>
            <para>The target capacity of Spot units for the instance fleet. For more information, see
            <a>InstanceFleetConfig$TargetSpotCapacity</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.OnDemandResizeSpecification_TimeoutDurationMinute">
            <summary>
            <para>
            <para>On-Demand resize timeout in minutes. If On-Demand Instances are not provisioned within
            this time, the resize workflow stops. The minimum value is 5 minutes, and the maximum
            value is 10,080 minutes (7 days). The timeout applies to all resize workflows on the
            Instance Fleet. The resize could be triggered by Amazon EMR Managed Scaling or by
            the customer (via Amazon EMR Console, Amazon EMR CLI modify-instance-fleet or Amazon
            EMR SDK ModifyInstanceFleet API) or by Amazon EMR due to Amazon EC2 Spot Reclamation.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.SpotResizeSpecification_TimeoutDurationMinute">
            <summary>
            <para>
            <para>Spot resize timeout in minutes. If Spot Instances are not provisioned within this
            time, the resize workflow will stop provisioning of Spot instances. Minimum value
            is 5 minutes and maximum value is 10,080 minutes (7 days). The timeout applies to
            all resize workflows on the Instance Fleet. The resize could be triggered by Amazon
            EMR Managed Scaling or by the customer (via Amazon EMR Console, Amazon EMR CLI modify-instance-fleet
            or Amazon EMR SDK ModifyInstanceFleet API) or by Amazon EMR due to Amazon EC2 Spot
            Reclamation.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ModifyInstanceFleetResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet">
            <summary>
            ModifyInstanceGroups modifies the number of nodes and configuration settings of an
            instance group. The input parameters include the new target instance count for the
            group and the instance group ID. The call will either succeed or fail atomically.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.ClusterId">
            <summary>
            <para>
            <para>The ID of the cluster to which the instance group belongs.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.InstanceGroup">
            <summary>
            <para>
            <para>Instance groups to change.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ModifyInstanceGroupsResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.FindEMRReleaseLabelCmdlet">
            <summary>
            Retrieves release labels of Amazon EMR services in the Region where the API is called.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.FindEMRReleaseLabelCmdlet.Filters_Application">
            <summary>
            <para>
            <para>Optional release label application filter. For example, <c>spark@2.1.0</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.FindEMRReleaseLabelCmdlet.Filters_Prefix">
            <summary>
            <para>
            <para>Optional release label version prefix filter. For example, <c>emr-5</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.FindEMRReleaseLabelCmdlet.MaxResult">
            <summary>
            <para>
            <para>Defines the maximum number of release labels to return in a single response. The default
            is <c>100</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.FindEMRReleaseLabelCmdlet.NextToken">
            <summary>
            <para>
            <para>Specifies the next page of results. If <c>NextToken</c> is not specified, which is
            usually the case for the first request of ListReleaseLabels, the first page of results
            are determined by other filtering parameters or by the latest version. The <c>ListReleaseLabels</c>
            request fails if the identity (Amazon Web Services account ID) and all filtering parameters
            are different from the original request, or if the <c>NextToken</c> is expired or
            tampered with.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.FindEMRReleaseLabelCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ReleaseLabels'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListReleaseLabelsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListReleaseLabelsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRAutoTerminationPolicyCmdlet">
            <summary>
            Returns the auto-termination policy for an Amazon EMR cluster.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRAutoTerminationPolicyCmdlet.ClusterId">
            <summary>
            <para>
            <para>Specifies the ID of the Amazon EMR cluster for which the auto-termination policy will
            be fetched.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRAutoTerminationPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'AutoTerminationPolicy'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.GetAutoTerminationPolicyResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.GetAutoTerminationPolicyResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRAutoTerminationPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRBlockPublicAccessConfigurationCmdlet">
            <summary>
            Returns the Amazon EMR block public access configuration for your Amazon Web Services
            account in the current Region. For more information see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/configure-block-public-access.html">Configure
            Block Public Access for Amazon EMR</a> in the <i>Amazon EMR Management Guide</i>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBlockPublicAccessConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.GetBlockPublicAccessConfigurationResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.GetBlockPublicAccessConfigurationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet">
            <summary>
            Provides information about the bootstrap actions associated with a cluster.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.ClusterId">
            <summary>
            <para>
            <para>The cluster identifier for the bootstrap actions to list.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the next set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'BootstrapActions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListBootstrapActionsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListBootstrapActionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterCmdlet">
            <summary>
            Provides cluster-level details including status, hardware and software configuration,
            VPC settings, and so on.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterCmdlet.ClusterId">
            <summary>
            <para>
            <para>The identifier of the cluster to describe.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Cluster'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeClusterResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeClusterResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet">
            <summary>
            Provides the status of all clusters visible to this Amazon Web Services account. Allows
            you to filter the list of clusters based on certain criteria; for example, filtering
            by cluster creation date and time or by status. This call returns a maximum of 50
            clusters in unsorted order per call, but returns a marker to track the paging of the
            cluster list across multiple ListClusters calls.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.ClusterState">
            <summary>
            <para>
            <para>The cluster state filters to apply when listing clusters. Clusters that change state
            while this action runs may be not be returned as expected in the list of clusters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.CreatedAfter">
            <summary>
            <para>
            <para>The creation date and time beginning value filter for listing clusters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.CreatedBefore">
            <summary>
            <para>
            <para>The creation date and time end value filter for listing clusters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the next set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Clusters'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListClustersResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListClustersResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterSessionCredentialCmdlet">
            <summary>
            Provides temporary, HTTP basic credentials that are associated with a given runtime
            IAM role and used by a cluster with fine-grained access control activated. You can
            use these credentials to connect to cluster endpoints that support username and password
            authentication.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterSessionCredentialCmdlet.ClusterId">
            <summary>
            <para>
            <para>The unique identifier of the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterSessionCredentialCmdlet.ExecutionRoleArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the runtime role for interactive workload submission
            on the cluster. The runtime role can be a cross-account IAM role. The runtime role
            ARN is a combination of account ID, role name, and role type using the following format:
            <c>arn:partition:service:region:account:resource</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterSessionCredentialCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.GetClusterSessionCredentialsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.GetClusterSessionCredentialsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterSessionCredentialCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet">
            <summary>
            Lists all available details about the instance fleets in a cluster.
             
             <note><para>
            The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and
            later, excluding 5.0.x versions.
            </para></note><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.ClusterId">
            <summary>
            <para>
            <para>The unique identifier of the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the next set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'InstanceFleets'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListInstanceFleetsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListInstanceFleetsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet">
            <summary>
            Provides all available details about the instance groups in a cluster.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.ClusterId">
            <summary>
            <para>
            <para>The identifier of the cluster for which to list the instance groups.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the next set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'InstanceGroups'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListInstanceGroupsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListInstanceGroupsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet">
            <summary>
            Provides information for all active Amazon EC2 instances and Amazon EC2 instances
            terminated in the last 30 days, up to a maximum of 2,000. Amazon EC2 instances in
            any of the following states are considered active: AWAITING_FULFILLMENT, PROVISIONING,
            BOOTSTRAPPING, RUNNING.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.ClusterId">
            <summary>
            <para>
            <para>The identifier of the cluster for which to list the instances.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceFleetId">
            <summary>
            <para>
            <para>The unique identifier of the instance fleet.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceFleetType">
            <summary>
            <para>
            <para>The node type of the instance fleet. For example MASTER, CORE, or TASK.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceGroupId">
            <summary>
            <para>
            <para>The identifier of the instance group for which to list the instances.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceGroupType">
            <summary>
            <para>
            <para>The type of instance group for which to list the instances.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceState">
            <summary>
            <para>
            <para>A list of instance states that will filter the instances returned with this request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the next set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Instances'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListInstancesResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListInstancesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceGroupId parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceGroupId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet">
            <summary>
            This API is no longer supported and will eventually be removed. We recommend you use
            <a>ListClusters</a>, <a>DescribeCluster</a>, <a>ListSteps</a>, <a>ListInstanceGroups</a>
            and <a>ListBootstrapActions</a> instead.
             
              
            <para>
            DescribeJobFlows returns a list of job flows that match all of the supplied parameters.
            The parameters can include a list of job flow IDs, job flow states, and restrictions
            on job flow creation date and time.
            </para><para>
            Regardless of supplied parameters, only job flows created within the last two months
            are returned.
            </para><para>
            If no parameters are supplied, then job flows matching either of the following criteria
            are returned:
            </para><ul><li><para>
            Job flows created and completed in the last two weeks
            </para></li><li><para>
             Job flows created within the last two months that are in one of the following states:
            <c>RUNNING</c>, <c>WAITING</c>, <c>SHUTTING_DOWN</c>, <c>STARTING</c></para></li></ul><para>
            Amazon EMR can return a maximum of 512 job flow descriptions.
            </para><br/><br/>This operation is deprecated.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.CreatedAfter">
            <summary>
            <para>
            <para>Return only job flows created after this date and time.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.CreatedBefore">
            <summary>
            <para>
            <para>Return only job flows created before this date and time.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.JobFlowId">
            <summary>
            <para>
            <para>Return only job flows whose job flow ID is contained in this list.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.JobFlowState">
            <summary>
            <para>
            <para>Return only job flows whose state is contained in this list.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'JobFlows'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeJobFlowsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeJobFlowsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the JobFlowId parameter.
            The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRManagedScalingPolicyCmdlet">
            <summary>
            Fetches the attached managed scaling policy for an Amazon EMR cluster.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRManagedScalingPolicyCmdlet.ClusterId">
            <summary>
            <para>
            <para>Specifies the ID of the cluster for which the managed scaling policy will be fetched.
            </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRManagedScalingPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ManagedScalingPolicy'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.GetManagedScalingPolicyResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.GetManagedScalingPolicyResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRManagedScalingPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionCmdlet">
            <summary>
            Provides details of a notebook execution.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionCmdlet.NotebookExecutionId">
            <summary>
            <para>
            <para>The unique identifier of the notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'NotebookExecution'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeNotebookExecutionResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeNotebookExecutionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the NotebookExecutionId parameter.
            The -PassThru parameter is deprecated, use -Select '^NotebookExecutionId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet">
            <summary>
            Provides summaries of all notebook executions. You can filter the list based on multiple
            criteria such as status, time range, and editor id. Returns a maximum of 50 notebook
            executions and a marker to track the paging of a longer notebook execution list across
            multiple <c>ListNotebookExecutions</c> calls.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.EditorId">
            <summary>
            <para>
            <para>The unique ID of the editor associated with the notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.ExecutionEngineId">
            <summary>
            <para>
            <para>The unique ID of the execution engine.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.From">
            <summary>
            <para>
            <para>The beginning of time range filter for listing notebook executions. The default is
            the timestamp of 30 days ago.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.Status">
            <summary>
            <para>
            <para>The status filter for listing notebook executions.</para><ul><li><para><c>START_PENDING</c> indicates that the cluster has received the execution request
            but execution has not begun.</para></li><li><para><c>STARTING</c> indicates that the execution is starting on the cluster.</para></li><li><para><c>RUNNING</c> indicates that the execution is being processed by the cluster.</para></li><li><para><c>FINISHING</c> indicates that execution processing is in the final stages.</para></li><li><para><c>FINISHED</c> indicates that the execution has completed without error.</para></li><li><para><c>FAILING</c> indicates that the execution is failing and will not finish successfully.</para></li><li><para><c>FAILED</c> indicates that the execution failed.</para></li><li><para><c>STOP_PENDING</c> indicates that the cluster has received a <c>StopNotebookExecution</c>
            request and the stop is pending.</para></li><li><para><c>STOPPING</c> indicates that the cluster is in the process of stopping the execution
            as a result of a <c>StopNotebookExecution</c> request.</para></li><li><para><c>STOPPED</c> indicates that the execution stopped because of a <c>StopNotebookExecution</c>
            request.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.To">
            <summary>
            <para>
            <para>The end of time range filter for listing notebook executions. The default is the current
            timestamp.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token, returned by a previous <c>ListNotebookExecutions</c> call, that
            indicates the start of the list for this <c>ListNotebookExecutions</c> call.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'NotebookExecutions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListNotebookExecutionsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListNotebookExecutionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRReleaseLabelCmdlet">
            <summary>
            Provides Amazon EMR release label details, such as the releases available the Region
            where the API request is run, and the available applications for a specific Amazon
            EMR release label. Can also list Amazon EMR releases that support a specified version
            of Spark.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRReleaseLabelCmdlet.ReleaseLabel">
            <summary>
            <para>
            <para>The target release label to be described.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRReleaseLabelCmdlet.MaxResult">
            <summary>
            <para>
            <para>Reserved for future use. Currently set to null.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRReleaseLabelCmdlet.NextToken">
            <summary>
            <para>
            <para>The pagination token. Reserved for future use. Currently set to null.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRReleaseLabelCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeReleaseLabelResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeReleaseLabelResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRReleaseLabelCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ReleaseLabel parameter.
            The -PassThru parameter is deprecated, use -Select '^ReleaseLabel' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationCmdlet">
            <summary>
            Provides the details of a security configuration by returning the configuration JSON.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationCmdlet.Name">
            <summary>
            <para>
            <para>The name of the security configuration.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeSecurityConfigurationResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeSecurityConfigurationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationListCmdlet">
            <summary>
            Lists all the security configurations visible to this account, providing their creation
            dates and times, and their names. This call returns a maximum of 50 clusters per call,
            but returns a marker to track the paging of the cluster list across multiple ListSecurityConfigurations
            calls.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SecurityConfigurations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListSecurityConfigurationsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListSecurityConfigurationsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet">
            <summary>
            Provides more detail about the cluster step.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet.ClusterId">
            <summary>
            <para>
            <para>The identifier of the cluster with steps to describe.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet.StepId">
            <summary>
            <para>
            <para>The identifier of the step to describe.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Step'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeStepResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeStepResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the StepId parameter.
            The -PassThru parameter is deprecated, use -Select '^StepId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet">
            <summary>
            Provides a list of steps for the cluster in reverse order unless you specify <c>stepIds</c>
            with the request or filter by <c>StepStates</c>. You can specify a maximum of 10 <c>stepIDs</c>.
            The CLI automatically paginates results to return a list greater than 50 steps. To
            return more than 50 steps using the CLI, specify a <c>Marker</c>, which is a pagination
            token that indicates the next set of steps to retrieve.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.ClusterId">
            <summary>
            <para>
            <para>The identifier of the cluster for which to list the steps.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.StepId">
            <summary>
            <para>
            <para>The filter to limit the step list based on the identifier of the steps. You can specify
            a maximum of ten Step IDs. The character constraint applies to the overall length
            of the array.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.StepState">
            <summary>
            <para>
            <para>The filter to limit the step list based on certain states.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.Marker">
            <summary>
            <para>
            <para>The maximum number of steps that a single <c>ListSteps</c> action returns is 50. To
            return a longer list of steps, use multiple <c>ListSteps</c> actions along with the
            <c>Marker</c> parameter, which is a pagination token that indicates the next set of
            results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Steps'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListStepsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListStepsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioCmdlet">
            <summary>
            Returns details for the specified Amazon EMR Studio including ID, Name, VPC, Studio
            access URL, and so on.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioCmdlet.StudioId">
            <summary>
            <para>
            <para>The Amazon EMR Studio ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Studio'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeStudioResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeStudioResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the StudioId parameter.
            The -PassThru parameter is deprecated, use -Select '^StudioId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioListCmdlet">
            <summary>
            Returns a list of all Amazon EMR Studios associated with the Amazon Web Services account.
            The list includes details such as ID, Studio Access URL, and creation time for each
            Studio.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Studios'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListStudiosResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListStudiosResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet">
            <summary>
            Fetches mapping details for the specified Amazon EMR Studio and identity (user or
            group).
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.IdentityId">
            <summary>
            <para>
            <para>The globally unique identifier (GUID) of the user or group. For more information,
            see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserId</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-GroupId">GroupId</a>
            in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c>
            or <c>IdentityId</c> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.IdentityName">
            <summary>
            <para>
            <para>The name of the user or group to fetch. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserName">UserName</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-DisplayName">DisplayName</a>
            in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c>
            or <c>IdentityId</c> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.IdentityType">
            <summary>
            <para>
            <para>Specifies whether the identity to fetch is a user or a group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.StudioId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SessionMapping'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.GetStudioSessionMappingResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.GetStudioSessionMappingResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet">
            <summary>
            Returns a list of all user or group session mappings for the Amazon EMR Studio specified
            by <c>StudioId</c>.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.IdentityType">
            <summary>
            <para>
            <para>Specifies whether to return session mappings for users or groups. If not specified,
            the results include session mapping details for both users and groups.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.StudioId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SessionMappings'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListStudioSessionMappingsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListStudioSessionMappingsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRSupportedInstanceTypeCmdlet">
            <summary>
            A list of the instance types that Amazon EMR supports. You can filter the list by
            Amazon Web Services Region and Amazon EMR release.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSupportedInstanceTypeCmdlet.ReleaseLabel">
            <summary>
            <para>
            <para>The Amazon EMR release label determines the <a href="https://docs.aws.amazon.com/emr/latest/ReleaseGuide/emr-release-app-versions-6.x.html">versions
            of open-source application packages</a> that Amazon EMR has installed on the cluster.
            Release labels are in the format <c>emr-x.x.x</c>, where x.x.x is an Amazon EMR release
            number such as <c>emr-6.10.0</c>. For more information about Amazon EMR releases and
            their included application versions and features, see the <i><a href="https://docs.aws.amazon.com/emr/latest/ReleaseGuide/emr-release-components.html">Amazon
            EMR Release Guide</a></i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSupportedInstanceTypeCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that marks the next set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSupportedInstanceTypeCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SupportedInstanceTypes'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListSupportedInstanceTypesResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListSupportedInstanceTypesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSupportedInstanceTypeCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ReleaseLabel parameter.
            The -PassThru parameter is deprecated, use -Select '^ReleaseLabel' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSupportedInstanceTypeCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet">
            <summary>
            Creates a security configuration, which is stored in the service and can be specified
            when a cluster is created.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.Name">
            <summary>
            <para>
            <para>The name of the security configuration.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.SecurityConfiguration">
            <summary>
            <para>
            <para>The security configuration details in JSON format. For JSON parameters and examples,
            see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-security-configurations.html">Use
            Security Configurations to Set Up Cluster Security</a> in the <i>Amazon EMR Management
            Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.CreateSecurityConfigurationResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.CreateSecurityConfigurationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the SecurityConfiguration parameter.
            The -PassThru parameter is deprecated, use -Select '^SecurityConfiguration' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet">
            <summary>
            Creates a new Amazon EMR Studio.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.AuthMode">
            <summary>
            <para>
            <para>Specifies whether the Studio authenticates users using IAM or IAM Identity Center.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.DefaultS3Location">
            <summary>
            <para>
            <para>The Amazon S3 location to back up Amazon EMR Studio Workspaces and notebook files.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Description">
            <summary>
            <para>
            <para>A detailed description of the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.EncryptionKeyArn">
            <summary>
            <para>
            <para>The KMS key identifier (ARN) used to encrypt Amazon EMR Studio workspace and notebook
            files when backed up to Amazon S3.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.EngineSecurityGroupId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio Engine security group. The Engine security group allows
            inbound network traffic from the Workspace security group, and it must be in the same
            VPC specified by <c>VpcId</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.IdcInstanceArn">
            <summary>
            <para>
            <para> The ARN of the IAM Identity Center instance to create the Studio application. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.IdcUserAssignment">
            <summary>
            <para>
            <para> Specifies whether IAM Identity Center user assignment is <c>REQUIRED</c> or <c>OPTIONAL</c>.
            If the value is set to <c>REQUIRED</c>, users must be explicitly assigned to the Studio
            application to access the Studio. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.IdpAuthUrl">
            <summary>
            <para>
            <para>The authentication endpoint of your identity provider (IdP). Specify this value when
            you use IAM authentication and want to let federated users log in to a Studio with
            the Studio URL and credentials from your IdP. Amazon EMR Studio redirects users to
            this endpoint to enter credentials.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.IdpRelayStateParameterName">
            <summary>
            <para>
            <para>The name that your identity provider (IdP) uses for its <c>RelayState</c> parameter.
            For example, <c>RelayState</c> or <c>TargetSource</c>. Specify this value when you
            use IAM authentication and want to let federated users log in to a Studio using the
            Studio URL. The <c>RelayState</c> parameter differs by IdP.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Name">
            <summary>
            <para>
            <para>A descriptive name for the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.ServiceRole">
            <summary>
            <para>
            <para>The IAM role that the Amazon EMR Studio assumes. The service role provides a way for
            Amazon EMR Studio to interoperate with other Amazon Web Services services.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.SubnetId">
            <summary>
            <para>
            <para>A list of subnet IDs to associate with the Amazon EMR Studio. A Studio can have a
            maximum of 5 subnets. The subnets must belong to the VPC specified by <c>VpcId</c>.
            Studio users can create a Workspace in any of the specified subnets.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Tag">
            <summary>
            <para>
            <para>A list of tags to associate with the Amazon EMR Studio. Tags are user-defined key-value
            pairs that consist of a required key string with a maximum of 128 characters, and
            an optional value string with a maximum of 256 characters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.TrustedIdentityPropagationEnabled">
            <summary>
            <para>
            <para> A Boolean indicating whether to enable Trusted identity propagation for the Studio.
            The default value is <c>false</c>. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.UserRole">
            <summary>
            <para>
            <para>The IAM user role that users and groups assume when logged in to an Amazon EMR Studio.
            Only specify a <c>UserRole</c> when you use IAM Identity Center authentication. The
            permissions attached to the <c>UserRole</c> can be scoped down for each user or group
            using session policies.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.VpcId">
            <summary>
            <para>
            <para>The ID of the Amazon Virtual Private Cloud (Amazon VPC) to associate with the Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.WorkspaceSecurityGroupId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio Workspace security group. The Workspace security group
            allows outbound network traffic to resources in the Engine security group, and it
            must be in the same VPC specified by <c>VpcId</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.CreateStudioResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.CreateStudioResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet">
            <summary>
            Maps a user or group to the Amazon EMR Studio specified by <c>StudioId</c>, and applies
            a session policy to refine Studio permissions for that user or group. Use <c>CreateStudioSessionMapping</c>
            to assign users to a Studio when you use IAM Identity Center authentication. For instructions
            on how to assign users to a Studio when you use IAM authentication, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-studio-manage-users.html#emr-studio-assign-users-groups">Assign
            a user or group to your EMR Studio</a>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.IdentityId">
            <summary>
            <para>
            <para>The globally unique identifier (GUID) of the user or group from the IAM Identity Center
            Identity Store. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserId</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-GroupId">GroupId</a>
            in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c>
            or <c>IdentityId</c> must be specified, but not both.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.IdentityName">
            <summary>
            <para>
            <para>The name of the user or group. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserName">UserName</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-DisplayName">DisplayName</a>
            in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c>
            or <c>IdentityId</c> must be specified, but not both.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.IdentityType">
            <summary>
            <para>
            <para>Specifies whether the identity to map to the Amazon EMR Studio is a user or a group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.SessionPolicyArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) for the session policy that will be applied to the
            user or group. You should specify the ARN for the session policy that you want to
            apply, not the ARN of your user role. For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-studio-user-role.html">Create
            an Amazon EMR Studio User Role with Session Policies</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.StudioId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio to which the user or group will be mapped.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.CreateStudioSessionMappingResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet">
            <summary>
            Removes an automatic scaling policy from a specified instance group within an Amazon
            EMR cluster.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.ClusterId">
            <summary>
            <para>
            <para>Specifies the ID of a cluster. The instance group to which the automatic scaling policy
            is applied is within this cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.InstanceGroupId">
            <summary>
            <para>
            <para>Specifies the ID of the instance group to which the scaling policy is applied.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RemoveAutoScalingPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoTerminationPolicyCmdlet">
            <summary>
            Removes an auto-termination policy from an Amazon EMR cluster.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoTerminationPolicyCmdlet.ClusterId">
            <summary>
            <para>
            <para>Specifies the ID of the Amazon EMR cluster from which the auto-termination policy
            will be removed.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoTerminationPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RemoveAutoTerminationPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoTerminationPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoTerminationPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet">
            <summary>
            Removes a managed scaling policy from a specified Amazon EMR cluster.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet.ClusterId">
            <summary>
            <para>
            <para> Specifies the ID of the cluster from which the managed scaling policy will be removed.
            </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RemoveManagedScalingPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet">
            <summary>
            Removes tags from an Amazon EMR resource, such as a cluster or Amazon EMR Studio.
            Tags make it easier to associate resources in various ways, such as grouping clusters
            to track your Amazon EMR resource allocation costs. For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-tags.html">Tag
            Clusters</a>.
             
              
            <para>
            The following example removes the stack tag with value Prod from a cluster:
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.ResourceId">
            <summary>
            <para>
            <para>The Amazon EMR resource identifier from which tags will be removed. For example, a
            cluster identifier or an Amazon EMR Studio ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.TagKey">
            <summary>
            <para>
            <para>A list of tag keys to remove from the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RemoveTagsResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.PassThru">
            <summary>
            Returns the collection of Tag keys that were removed
            The -PassThru parameter is deprecated, use -Select instead. This parameter will be removed in future
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet">
            <summary>
            Deletes a security configuration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet.Name">
            <summary>
            <para>
            <para>The name of the security configuration.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DeleteSecurityConfigurationResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet">
            <summary>
            Removes an Amazon EMR Studio from the Studio metadata store.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet.StudioId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DeleteStudioResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the StudioId parameter.
            The -PassThru parameter is deprecated, use -Select '^StudioId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet">
            <summary>
            Removes a user or group from an Amazon EMR Studio.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.IdentityId">
            <summary>
            <para>
            <para>The globally unique identifier (GUID) of the user or group to remove from the Amazon
            EMR Studio. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserId</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-GroupId">GroupId</a>
            in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c>
            or <c>IdentityId</c> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.IdentityName">
            <summary>
            <para>
            <para>The name of the user name or group to remove from the Amazon EMR Studio. For more
            information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserName">UserName</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-DisplayName">DisplayName</a>
            in the <i>IAM Identity Center Store API Reference</i>. Either <c>IdentityName</c>
            or <c>IdentityId</c> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.IdentityType">
            <summary>
            <para>
            <para>Specifies whether the identity to delete from the Amazon EMR Studio is a user or a
            group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.StudioId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DeleteStudioSessionMappingResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.SetEMRKeepJobFlowAliveWhenNoStepCmdlet">
            <summary>
            You can use the <c>SetKeepJobFlowAliveWhenNoSteps</c> to configure a cluster (job
            flow) to terminate after the step execution, i.e., all your steps are executed. If
            you want a transient cluster that shuts down after the last of the current executing
            steps are completed, you can configure <c>SetKeepJobFlowAliveWhenNoSteps</c> to false.
            If you want a long running cluster, configure <c>SetKeepJobFlowAliveWhenNoSteps</c>
            to true.
             
              
            <para>
            For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/UsingEMR_TerminationProtection.html">Managing
            Cluster Termination</a> in the <i>Amazon EMR Management Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRKeepJobFlowAliveWhenNoStepCmdlet.JobFlowId">
            <summary>
            <para>
            <para>A list of strings that uniquely identify the clusters to protect. This identifier
            is returned by <a href="https://docs.aws.amazon.com/emr/latest/APIReference/API_RunJobFlow.html">RunJobFlow</a>
            and can also be obtained from <a href="https://docs.aws.amazon.com/emr/latest/APIReference/API_DescribeJobFlows.html">DescribeJobFlows</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRKeepJobFlowAliveWhenNoStepCmdlet.KeepJobFlowAliveWhenNoStep">
            <summary>
            <para>
            <para>A Boolean that indicates whether to terminate the cluster after all steps are executed.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRKeepJobFlowAliveWhenNoStepCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.SetKeepJobFlowAliveWhenNoStepsResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRKeepJobFlowAliveWhenNoStepCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the KeepJobFlowAliveWhenNoStep parameter.
            The -PassThru parameter is deprecated, use -Select '^KeepJobFlowAliveWhenNoStep' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRKeepJobFlowAliveWhenNoStepCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet">
            <summary>
            SetTerminationProtection locks a cluster (job flow) so the Amazon EC2 instances in
            the cluster cannot be terminated by user intervention, an API call, or in the event
            of a job-flow error. The cluster still terminates upon successful completion of the
            job flow. Calling <c>SetTerminationProtection</c> on a cluster is similar to calling
            the Amazon EC2 <c>DisableAPITermination</c> API on all Amazon EC2 instances in a cluster.
             
              
            <para><c>SetTerminationProtection</c> is used to prevent accidental termination of a cluster
            and to ensure that in the event of an error, the instances persist so that you can
            recover any data stored in their ephemeral instance storage.
            </para><para>
             To terminate a cluster that has been locked by setting <c>SetTerminationProtection</c>
            to <c>true</c>, you must first unlock the job flow by a subsequent call to <c>SetTerminationProtection</c>
            in which you set the value to <c>false</c>.
            </para><para>
             For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/UsingEMR_TerminationProtection.html">Managing
            Cluster Termination</a> in the <i>Amazon EMR Management Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.JobFlowId">
            <summary>
            <para>
            <para> A list of strings that uniquely identify the clusters to protect. This identifier
            is returned by <a>RunJobFlow</a> and can also be obtained from <a>DescribeJobFlows</a>
            . </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.TerminationProtected">
            <summary>
            <para>
            <para>A Boolean that indicates whether to protect the cluster and prevent the Amazon EC2
            instances in the cluster from shutting down due to API calls, user intervention, or
            job-flow error.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.SetTerminationProtectionResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the JobFlowId parameter.
            The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.SetEMRUnhealthyNodeReplacementCmdlet">
            <summary>
            Specify whether to enable unhealthy node replacement, which lets Amazon EMR gracefully
            replace core nodes on a cluster if any nodes become unhealthy. For example, a node
            becomes unhealthy if disk usage is above 90%. If unhealthy node replacement is on
            and <c>TerminationProtected</c> are off, Amazon EMR immediately terminates the unhealthy
            core nodes. To use unhealthy node replacement and retain unhealthy core nodes, use
            to turn on termination protection. In such cases, Amazon EMR adds the unhealthy nodes
            to a denylist, reducing job interruptions and failures.
             
              
            <para>
            If unhealthy node replacement is on, Amazon EMR notifies YARN and other applications
            on the cluster to stop scheduling tasks with these nodes, moves the data, and then
            terminates the nodes.
            </para><para>
            For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-node-replacement.html">graceful
            node replacement</a> in the <i>Amazon EMR Management Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRUnhealthyNodeReplacementCmdlet.JobFlowId">
            <summary>
            <para>
            <para>The list of strings that uniquely identify the clusters for which to turn on unhealthy
            node replacement. You can get these identifiers by running the <a>RunJobFlow</a> or
            the <a>DescribeJobFlows</a> operations.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRUnhealthyNodeReplacementCmdlet.UnhealthyNodeReplacement">
            <summary>
            <para>
            <para>Indicates whether to turn on or turn off graceful unhealthy node replacement.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRUnhealthyNodeReplacementCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.SetUnhealthyNodeReplacementResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRUnhealthyNodeReplacementCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the UnhealthyNodeReplacement parameter.
            The -PassThru parameter is deprecated, use -Select '^UnhealthyNodeReplacement' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRUnhealthyNodeReplacementCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet">
            <summary>
            <important><para>
            The SetVisibleToAllUsers parameter is no longer supported. Your cluster may be visible
            to all users in your account. To restrict cluster access using an IAM policy, see
            <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-access-IAM.html">Identity
            and Access Management for Amazon EMR</a>.
            </para></important><para>
            Sets the <a>Cluster$VisibleToAllUsers</a> value for an Amazon EMR cluster. When <c>true</c>,
            IAM principals in the Amazon Web Services account can perform Amazon EMR cluster actions
            that their IAM policies allow. When <c>false</c>, only the IAM principal that created
            the cluster and the Amazon Web Services account root user can perform Amazon EMR actions
            on the cluster, regardless of IAM permissions policies attached to other IAM principals.
            </para><para>
            This action works on running clusters. When you create a cluster, use the <a>RunJobFlowInput$VisibleToAllUsers</a>
            parameter.
            </para><para>
            For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/security_IAM_emr-with-IAM.html#security_set_visible_to_all_users">Understanding
            the Amazon EMR Cluster VisibleToAllUsers Setting</a> in the <i>Amazon EMR Management
            Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.JobFlowId">
            <summary>
            <para>
            <para>The unique identifier of the job flow (cluster).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.VisibleToAllUser">
            <summary>
            <para>
            <para>A value of <c>true</c> indicates that an IAM principal in the Amazon Web Services
            account can perform Amazon EMR actions on the cluster that the IAM policies attached
            to the principal allow. A value of <c>false</c> indicates that only the IAM principal
            that created the cluster and the Amazon Web Services root user can perform Amazon
            EMR actions on the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.SetVisibleToAllUsersResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the JobFlowId parameter.
            The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet">
            <summary>
            RunJobFlow creates and starts running a new cluster (job flow). The cluster runs the
            steps specified. After the steps complete, the cluster stops and the HDFS partition
            is lost. To prevent loss of data, configure the last step of the job flow to store
            results in Amazon S3. If the <a>JobFlowInstancesConfig</a><c>KeepJobFlowAliveWhenNoSteps</c>
            parameter is set to <c>TRUE</c>, the cluster transitions to the WAITING state rather
            than shutting down after the steps have completed.
             
              
            <para>
            For additional protection, you can set the <a>JobFlowInstancesConfig</a><c>TerminationProtected</c>
            parameter to <c>TRUE</c> to lock the cluster and prevent it from being terminated
            by API call, user intervention, or in the event of a job flow error.
            </para><para>
            A maximum of 256 steps are allowed in each job flow.
            </para><para>
            If your cluster is long-running (such as a Hive data warehouse) or complex, you may
            require more than 256 steps to process your data. You can bypass the 256-step limitation
            in various ways, including using the SSH shell to connect to the master node and submitting
            queries directly to the software running on the master node, such as Hive and Hadoop.
            </para><para>
            For long-running clusters, we recommend that you periodically store your results.
            </para><note><para>
            The instance fleets configuration is available only in Amazon EMR releases 4.8.0 and
            later, excluding 5.0.x versions. The RunJobFlow request can contain InstanceFleets
            parameters or InstanceGroups parameters, but not both.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.AdditionalInfo">
            <summary>
            <para>
            <para>A JSON string for selecting additional features.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_AdditionalMasterSecurityGroup">
            <summary>
            <para>
            <para>A list of additional Amazon EC2 security group IDs for the master node.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_AdditionalSlaveSecurityGroup">
            <summary>
            <para>
            <para>A list of additional Amazon EC2 security group IDs for the core and task nodes.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_ADDomainJoinPassword">
            <summary>
            <para>
            <para>The Active Directory password for <c>ADDomainJoinUser</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_ADDomainJoinUser">
            <summary>
            <para>
            <para>Required only when establishing a cross-realm trust with an Active Directory domain.
            A user with sufficient privileges to join resources to the domain.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.AmiVersion">
            <summary>
            <para>
            <para>Applies only to Amazon EMR AMI versions 3.x and 2.x. For Amazon EMR releases 4.0 and
            later, <c>ReleaseLabel</c> is used. To specify a custom AMI, use <c>CustomAmiID</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Application">
            <summary>
            <para>
            <para>Applies to Amazon EMR releases 4.0 and later. A case-insensitive list of applications
            for Amazon EMR to install and configure when launching the cluster. For a list of
            applications available for each Amazon EMR release version, see the <a href="https://docs.aws.amazon.com/emr/latest/ReleaseGuide/">Amazon
            EMRRelease Guide</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.AutoScalingRole">
            <summary>
            <para>
            <para>An IAM role for automatic scaling policies. The default role is <c>EMR_AutoScaling_DefaultRole</c>.
            The IAM role provides permissions that the automatic scaling feature requires to launch
            and terminate Amazon EC2 instances in an instance group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Placement_AvailabilityZone">
            <summary>
            <para>
            <para>The Amazon EC2 Availability Zone for the cluster. <c>AvailabilityZone</c> is used
            for uniform instance groups, while <c>AvailabilityZones</c> (plural) is used for instance
            fleets.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Placement_AvailabilityZones">
            <summary>
            <para>
            <para>When multiple Availability Zones are specified, Amazon EMR evaluates them and launches
            instances in the optimal Availability Zone. <c>AvailabilityZones</c> is used for instance
            fleets, while <c>AvailabilityZone</c> (singular) is used for uniform instance groups.</para><note><para>The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and
            later, excluding 5.0.x versions.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.BootstrapAction">
            <summary>
            <para>
            <para>A list of bootstrap actions to run before Hadoop starts on the cluster nodes.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Configuration">
            <summary>
            <para>
            <para>For Amazon EMR releases 4.0 and later. The list of configurations supplied for the
            Amazon EMR cluster that you are creating.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_CrossRealmTrustPrincipalPassword">
            <summary>
            <para>
            <para>Required only when establishing a cross-realm trust with a KDC in a different realm.
            The cross-realm principal password, which must be identical across realms.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.CustomAmiId">
            <summary>
            <para>
            <para>Available only in Amazon EMR releases 5.7.0 and later. The ID of a custom Amazon EBS-backed
            Linux AMI. If specified, Amazon EMR uses this AMI when it launches cluster Amazon
            EC2 instances. For more information about custom AMIs in Amazon EMR, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-custom-ami.html">Using
            a Custom AMI</a> in the <i>Amazon EMR Management Guide</i>. If omitted, the cluster
            uses the base Linux AMI for the <c>ReleaseLabel</c> specified. For Amazon EMR releases
            2.x and 3.x, use <c>AmiVersion</c> instead.</para><para>For information about creating a custom AMI, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/creating-an-ami-ebs.html">Creating
            an Amazon EBS-Backed Linux AMI</a> in the <i>Amazon Elastic Compute Cloud User Guide
            for Linux Instances</i>. For information about finding an AMI ID, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/finding-an-ami.html">Finding
            a Linux AMI</a>. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.EbsRootVolumeIops">
            <summary>
            <para>
            <para>The IOPS, of the Amazon EBS root device volume of the Linux AMI that is used for each
            Amazon EC2 instance. Available in Amazon EMR releases 6.15.0 and later.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.EbsRootVolumeSize">
            <summary>
            <para>
            <para>The size, in GiB, of the Amazon EBS root device volume of the Linux AMI that is used
            for each Amazon EC2 instance. Available in Amazon EMR releases 4.x and later.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.EbsRootVolumeThroughput">
            <summary>
            <para>
            <para>The throughput, in MiB/s, of the Amazon EBS root device volume of the Linux AMI that
            is used for each Amazon EC2 instance. Available in Amazon EMR releases 6.15.0 and
            later.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Ec2KeyName">
            <summary>
            <para>
            <para>The name of the Amazon EC2 key pair that can be used to connect to the master node
            using SSH as the user called "hadoop."</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Ec2SubnetId">
            <summary>
            <para>
            <para>Applies to clusters that use the uniform instance group configuration. To launch the
            cluster in Amazon Virtual Private Cloud (Amazon VPC), set this parameter to the identifier
            of the Amazon VPC subnet where you want the cluster to launch. If you do not specify
            this value and your account supports EC2-Classic, the cluster launches in EC2-Classic.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Ec2SubnetIds">
            <summary>
            <para>
            <para>Applies to clusters that use the instance fleet configuration. When multiple Amazon
            EC2 subnet IDs are specified, Amazon EMR evaluates them and launches instances in
            the optimal subnet.</para><note><para>The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and
            later, excluding 5.0.x versions.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_EmrManagedMasterSecurityGroup">
            <summary>
            <para>
            <para>The identifier of the Amazon EC2 security group for the master node. If you specify
            <c>EmrManagedMasterSecurityGroup</c>, you must also specify <c>EmrManagedSlaveSecurityGroup</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_EmrManagedSlaveSecurityGroup">
            <summary>
            <para>
            <para>The identifier of the Amazon EC2 security group for the core and task nodes. If you
            specify <c>EmrManagedSlaveSecurityGroup</c>, you must also specify <c>EmrManagedMasterSecurityGroup</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_HadoopVersion">
            <summary>
            <para>
            <para>Applies only to Amazon EMR release versions earlier than 4.0. The Hadoop version for
            the cluster. Valid inputs are "0.18" (no longer maintained), "0.20" (no longer maintained),
            "0.20.205" (no longer maintained), "1.0.3", "2.2.0", or "2.4.0". If you do not set
            this value, the default of 0.18 is used, unless the <c>AmiVersion</c> parameter is
            set in the RunJobFlow call, in which case the default version of Hadoop for that AMI
            version is used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.AutoTerminationPolicy_IdleTimeout">
            <summary>
            <para>
            <para>Specifies the amount of idle time in seconds after which the cluster automatically
            terminates. You can specify a minimum of 60 seconds and a maximum of 604800 seconds
            (seven days).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_InstanceCount">
            <summary>
            <para>
            <para>The number of Amazon EC2 instances in the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_InstanceFleet">
            <summary>
            <para>
            <note><para>The instance fleet configuration is available only in Amazon EMR releases 4.8.0 and
            later, excluding 5.0.x versions.</para></note><para>Describes the Amazon EC2 instances and instance configurations for clusters that use
            the instance fleet configuration.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_InstanceGroup">
            <summary>
            <para>
            <para>Configuration for the instance groups in a cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.JobFlowRole">
            <summary>
            <para>
            <para>Also called instance profile and Amazon EC2 role. An IAM role for an Amazon EMR cluster.
            The Amazon EC2 instances of the cluster assume this role. The default role is <c>EMR_EC2_DefaultRole</c>.
            In order to use the default role, you must have already created it using the CLI or
            console.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_KdcAdminPassword">
            <summary>
            <para>
            <para>The password used within the cluster for the kadmin service on the cluster-dedicated
            KDC, which maintains Kerberos principals, password policies, and keytabs for the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_KeepJobFlowAliveWhenNoStep">
            <summary>
            <para>
            <para>Specifies whether the cluster should remain available after completing all steps.
            Defaults to <c>false</c>. For more information about configuring cluster termination,
            see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-termination.html">Control
            Cluster Termination</a> in the <i>EMR Management Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.LogEncryptionKmsKeyId">
            <summary>
            <para>
            <para>The KMS key used for encrypting log files. If a value is not provided, the logs remain
            encrypted by AES-256. This attribute is only available with Amazon EMR releases 5.30.0
            and later, excluding Amazon EMR 6.0.0.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.LogUri">
            <summary>
            <para>
            <para>The location in Amazon S3 to write the log files of the job flow. If a value is not
            provided, logs are not created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_MasterInstanceType">
            <summary>
            <para>
            <para>The Amazon EC2 instance type of the master node.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_MaximumCapacityUnit">
            <summary>
            <para>
            <para> The upper boundary of Amazon EC2 units. It is measured through vCPU cores or instances
            for instance groups and measured through units for instance fleets. Managed scaling
            activities are not allowed beyond this boundary. The limit only applies to the core
            and task nodes. The master node cannot be scaled after initial configuration. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_MaximumCoreCapacityUnit">
            <summary>
            <para>
            <para> The upper boundary of Amazon EC2 units for core node type in a cluster. It is measured
            through vCPU cores or instances for instance groups and measured through units for
            instance fleets. The core units are not allowed to scale beyond this boundary. The
            parameter is used to split capacity allocation between core and task nodes. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_MaximumOnDemandCapacityUnit">
            <summary>
            <para>
            <para> The upper boundary of On-Demand Amazon EC2 units. It is measured through vCPU cores
            or instances for instance groups and measured through units for instance fleets. The
            On-Demand units are not allowed to scale beyond this boundary. The parameter is used
            to split capacity allocation between On-Demand and Spot Instances. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_MinimumCapacityUnit">
            <summary>
            <para>
            <para> The lower boundary of Amazon EC2 units. It is measured through vCPU cores or instances
            for instance groups and measured through units for instance fleets. Managed scaling
            activities are not allowed beyond this boundary. The limit only applies to the core
            and task nodes. The master node cannot be scaled after initial configuration. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Name">
            <summary>
            <para>
            <para>The name of the job flow.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.NewSupportedProduct">
            <summary>
            <para>
            <note><para>For Amazon EMR releases 3.x and 2.x. For Amazon EMR releases 4.x and later, use Applications.</para></note><para>A list of strings that indicates third-party software to use with the job flow that
            accepts a user argument list. Amazon EMR accepts and forwards the argument list to
            the corresponding installation script as bootstrap action arguments. For more information,
            see "Launch a Job Flow on the MapR Distribution for Hadoop" in the <a href="https://docs.aws.amazon.com/emr/latest/DeveloperGuide/emr-dg.pdf">Amazon
            EMR Developer Guide</a>. Supported values are:</para><ul><li><para>"mapr-m3" - launch the cluster using MapR M3 Edition.</para></li><li><para>"mapr-m5" - launch the cluster using MapR M5 Edition.</para></li><li><para>"mapr" with the user arguments specifying "--edition,m3" or "--edition,m5" - launch
            the job flow using MapR M3 or M5 Edition respectively.</para></li><li><para>"mapr-m7" - launch the cluster using MapR M7 Edition.</para></li><li><para>"hunk" - launch the cluster with the Hunk Big Data Analytics Platform.</para></li><li><para>"hue"- launch the cluster with Hue installed.</para></li><li><para>"spark" - launch the cluster with Apache Spark installed.</para></li><li><para>"ganglia" - launch the cluster with the Ganglia Monitoring System installed.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.OSReleaseLabel">
            <summary>
            <para>
            <para>Specifies a particular Amazon Linux release for all nodes in a cluster launch RunJobFlow
            request. If a release is not specified, Amazon EMR uses the latest validated Amazon
            Linux release for cluster launch.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.PlacementGroupConfig">
            <summary>
            <para>
            <para>The specified placement group configuration for an Amazon EMR cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_Realm">
            <summary>
            <para>
            <para>The name of the Kerberos realm to which all nodes in a cluster belong. For example,
            <c>EC2.INTERNAL</c>. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ReleaseLabel">
            <summary>
            <para>
            <para>The Amazon EMR release label, which determines the version of open-source application
            packages installed on the cluster. Release labels are in the form <c>emr-x.x.x</c>,
            where x.x.x is an Amazon EMR release version such as <c>emr-5.14.0</c>. For more information
            about Amazon EMR release versions and included application versions and features,
            see <a href="https://docs.aws.amazon.com/emr/latest/ReleaseGuide/">https://docs.aws.amazon.com/emr/latest/ReleaseGuide/</a>.
            The release label applies only to Amazon EMR releases version 4.0 and later. Earlier
            versions use <c>AmiVersion</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.RepoUpgradeOnBoot">
            <summary>
            <para>
            <para>Applies only when <c>CustomAmiID</c> is used. Specifies which updates from the Amazon
            Linux AMI package repositories to apply automatically when the instance boots using
            the AMI. If omitted, the default is <c>SECURITY</c>, which indicates that only security
            updates are applied. If <c>NONE</c> is specified, no updates are applied, and all
            updates must be applied manually.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ScaleDownBehavior">
            <summary>
            <para>
            <para>Specifies the way that individual Amazon EC2 instances terminate when an automatic
            scale-in activity occurs or an instance group is resized. <c>TERMINATE_AT_INSTANCE_HOUR</c>
            indicates that Amazon EMR terminates nodes at the instance-hour boundary, regardless
            of when the request to terminate the instance was submitted. This option is only available
            with Amazon EMR 5.1.0 and later and is the default for clusters created using that
            version. <c>TERMINATE_AT_TASK_COMPLETION</c> indicates that Amazon EMR adds nodes
            to a deny list and drains tasks from nodes before terminating the Amazon EC2 instances,
            regardless of the instance-hour boundary. With either behavior, Amazon EMR removes
            the least active nodes first and blocks instance termination if it could lead to HDFS
            corruption. <c>TERMINATE_AT_TASK_COMPLETION</c> available only in Amazon EMR releases
            4.1.0 and later, and is the default for releases of Amazon EMR earlier than 5.1.0.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.SecurityConfiguration">
            <summary>
            <para>
            <para>The name of a security configuration to apply to the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_ServiceAccessSecurityGroup">
            <summary>
            <para>
            <para>The identifier of the Amazon EC2 security group for the Amazon EMR service to access
            clusters in VPC private subnets.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ServiceRole">
            <summary>
            <para>
            <para>The IAM role that Amazon EMR assumes in order to access Amazon Web Services resources
            on your behalf. If you've created a custom service role path, you must specify it
            for the service role when you launch your cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_SlaveInstanceType">
            <summary>
            <para>
            <para>The Amazon EC2 instance type of the core and task nodes.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.StepConcurrencyLevel">
            <summary>
            <para>
            <para>Specifies the number of steps that can be executed concurrently. The default value
            is <c>1</c>. The maximum value is <c>256</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Step">
            <summary>
            <para>
            <para>A list of steps to run.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.SupportedProduct">
            <summary>
            <para>
            <note><para>For Amazon EMR releases 3.x and 2.x. For Amazon EMR releases 4.x and later, use Applications.</para></note><para>A list of strings that indicates third-party software to use. For more information,
            see the <a href="https://docs.aws.amazon.com/emr/latest/DeveloperGuide/emr-dg.pdf">Amazon
            EMR Developer Guide</a>. Currently supported values are:</para><ul><li><para>"mapr-m3" - launch the job flow using MapR M3 Edition.</para></li><li><para>"mapr-m5" - launch the job flow using MapR M5 Edition.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Tag">
            <summary>
            <para>
            <para>A list of tags to associate with a cluster and propagate to Amazon EC2 instances.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_TerminationProtected">
            <summary>
            <para>
            <para>Specifies whether to lock the cluster to prevent the Amazon EC2 instances from being
            terminated by API call, user intervention, or in the event of a job-flow error.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_UnhealthyNodeReplacement">
            <summary>
            <para>
            <para>Indicates whether Amazon EMR should gracefully replace core nodes that have degraded
            within the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_UnitType">
            <summary>
            <para>
            <para> The unit type used for specifying a managed scaling policy. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.VisibleToAllUser">
            <summary>
            <para>
            <important><para>The VisibleToAllUsers parameter is no longer supported. By default, the value is set
            to <c>true</c>. Setting it to <c>false</c> now has no effect.</para></important><para>Set this value to <c>true</c> so that IAM principals in the Amazon Web Services account
            associated with the cluster can perform Amazon EMR actions on the cluster that their
            IAM policies allow. This value defaults to <c>true</c> for clusters created using
            the Amazon EMR API or the CLI <a href="https://docs.aws.amazon.com/cli/latest/reference/emr/create-cluster.html">create-cluster</a>
            command.</para><para>When set to <c>false</c>, only the IAM principal that created the cluster and the
            Amazon Web Services account root user can perform Amazon EMR actions for the cluster,
            regardless of the IAM permissions policies attached to other IAM principals. For more
            information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/security_IAM_emr-with-IAM.html#security_set_visible_to_all_users">Understanding
            the Amazon EMR cluster VisibleToAllUsers setting</a> in the <i>Amazon EMR Management
            Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'JobFlowId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RunJobFlowResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.RunJobFlowResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet">
            <summary>
            Starts a notebook execution.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.NotebookS3Location_Bucket">
            <summary>
            <para>
            <para>The Amazon S3 bucket that stores the notebook execution input.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.OutputNotebookS3Location_Bucket">
            <summary>
            <para>
            <para>The Amazon S3 bucket that stores the notebook execution output.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.EditorId">
            <summary>
            <para>
            <para>The unique identifier of the Amazon EMR Notebook to use for notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.EnvironmentVariable">
            <summary>
            <para>
            <para>The environment variables associated with the notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ExecutionEngine_ExecutionRoleArn">
            <summary>
            <para>
            <para>The execution role ARN required for the notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ExecutionEngine_Id">
            <summary>
            <para>
            <para>The unique identifier of the execution engine. For an Amazon EMR cluster, this is
            the cluster ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.NotebookS3Location_Key">
            <summary>
            <para>
            <para>The key to the Amazon S3 location that stores the notebook execution input.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.OutputNotebookS3Location_Key">
            <summary>
            <para>
            <para>The key to the Amazon S3 location that stores the notebook execution output.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ExecutionEngine_MasterInstanceSecurityGroupId">
            <summary>
            <para>
            <para>An optional unique ID of an Amazon EC2 security group to associate with the master
            instance of the Amazon EMR cluster for this notebook execution. For more information
            see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-managed-notebooks-security-groups.html">Specifying
            Amazon EC2 Security Groups for Amazon EMR Notebooks</a> in the <i>EMR Management Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.NotebookExecutionName">
            <summary>
            <para>
            <para>An optional name for the notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.NotebookInstanceSecurityGroupId">
            <summary>
            <para>
            <para>The unique identifier of the Amazon EC2 security group to associate with the Amazon
            EMR Notebook for this notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.NotebookParam">
            <summary>
            <para>
            <para>Input parameters in JSON format passed to the Amazon EMR Notebook at runtime for execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.OutputNotebookFormat">
            <summary>
            <para>
            <para>The output format for the notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.RelativePath">
            <summary>
            <para>
            <para>The path and file name of the notebook file for this execution, relative to the path
            specified for the Amazon EMR Notebook. For example, if you specify a path of <c>s3://MyBucket/MyNotebooks</c>
            when you create an Amazon EMR Notebook for a notebook with an ID of <c>e-ABCDEFGHIJK1234567890ABCD</c>
            (the <c>EditorID</c> of this request), and you specify a <c>RelativePath</c> of <c>my_notebook_executions/notebook_execution.ipynb</c>,
            the location of the file for the notebook execution is <c>s3://MyBucket/MyNotebooks/e-ABCDEFGHIJK1234567890ABCD/my_notebook_executions/notebook_execution.ipynb</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ServiceRole">
            <summary>
            <para>
            <para>The name or ARN of the IAM role that is used as the service role for Amazon EMR (the
            Amazon EMR role) for the notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.Tag">
            <summary>
            <para>
            <para>A list of tags associated with a notebook execution. Tags are user-defined key-value
            pairs that consist of a required key string with a maximum of 128 characters and an
            optional value string with a maximum of 256 characters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ExecutionEngine_Type">
            <summary>
            <para>
            <para>The type of execution engine. A value of <c>EMR</c> specifies an Amazon EMR cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'NotebookExecutionId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.StartNotebookExecutionResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.StartNotebookExecutionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet">
            <summary>
            TerminateJobFlows shuts a list of clusters (job flows) down. When a job flow is shut
            down, any step not yet completed is canceled and the Amazon EC2 instances on which
            the cluster is running are stopped. Any log files not already saved are uploaded to
            Amazon S3 if a LogUri was specified when the cluster was created.
             
              
            <para>
            The maximum number of clusters allowed is 10. The call to <c>TerminateJobFlows</c>
            is asynchronous. Depending on the configuration of the cluster, it may take up to
            1-5 minutes for the cluster to completely terminate and release allocated resources,
            such as Amazon EC2 instances.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet.JobFlowId">
            <summary>
            <para>
            <para>A list of job flows to be shut down.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.TerminateJobFlowsResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the JobFlowId parameter.
            The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet">
            <summary>
            Stops a notebook execution.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet.NotebookExecutionId">
            <summary>
            <para>
            <para>The unique identifier of the notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.StopNotebookExecutionResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the NotebookExecutionId parameter.
            The -PassThru parameter is deprecated, use -Select '^NotebookExecutionId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet">
            <summary>
            Cancels a pending step or steps in a running cluster. Available only in Amazon EMR
            versions 4.8.0 and later, excluding version 5.0.0. A maximum of 256 steps are allowed
            in each CancelSteps request. CancelSteps is idempotent but asynchronous; it does not
            guarantee that a step will be canceled, even if the request is successfully submitted.
            When you use Amazon EMR releases 5.28.0 and later, you can cancel steps that are in
            a <c>PENDING</c> or <c>RUNNING</c> state. In earlier versions of Amazon EMR, you can
            only cancel steps that are in a <c>PENDING</c> state.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.ClusterId">
            <summary>
            <para>
            <para>The <c>ClusterID</c> for the specified steps that will be canceled. Use <a>RunJobFlow</a>
            and <a>ListClusters</a> to get ClusterIDs. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.StepCancellationOption">
            <summary>
            <para>
            <para>The option to choose to cancel <c>RUNNING</c> steps. By default, the value is <c>SEND_INTERRUPT</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.StepId">
            <summary>
            <para>
            <para>The list of <c>StepIDs</c> to cancel. Use <a>ListSteps</a> to get steps and their
            states for the specified cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'CancelStepsInfoList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.CancelStepsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.CancelStepsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet">
            <summary>
            Updates an Amazon EMR Studio configuration, including attributes such as name, description,
            and subnets.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.DefaultS3Location">
            <summary>
            <para>
            <para>The Amazon S3 location to back up Workspaces and notebook files for the Amazon EMR
            Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.Description">
            <summary>
            <para>
            <para>A detailed description to assign to the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.EncryptionKeyArn">
            <summary>
            <para>
            <para>The KMS key identifier (ARN) used to encrypt Amazon EMR Studio workspace and notebook
            files when backed up to Amazon S3.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.Name">
            <summary>
            <para>
            <para>A descriptive name for the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.StudioId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.SubnetId">
            <summary>
            <para>
            <para>A list of subnet IDs to associate with the Amazon EMR Studio. The list can include
            new subnet IDs, but must also include all of the subnet IDs previously associated
            with the Studio. The list order does not matter. A Studio can have a maximum of 5
            subnets. The subnets must belong to the same VPC as the Studio. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.UpdateStudioResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the StudioId parameter.
            The -PassThru parameter is deprecated, use -Select '^StudioId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet">
            <summary>
            Updates the session policy attached to the user or group for the specified Amazon
            EMR Studio.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.IdentityId">
            <summary>
            <para>
            <para>The globally unique identifier (GUID) of the user or group. For more information,
            see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserId</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-GroupId">GroupId</a>
            in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c>
            or <c>IdentityId</c> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.IdentityName">
            <summary>
            <para>
            <para>The name of the user or group to update. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserName">UserName</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-DisplayName">DisplayName</a>
            in the <i>IAM Identity Center Identity Store API Reference</i>. Either <c>IdentityName</c>
            or <c>IdentityId</c> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.IdentityType">
            <summary>
            <para>
            <para>Specifies whether the identity to update is a user or a group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.SessionPolicyArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the session policy to associate with the specified
            user or group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.StudioId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.UpdateStudioSessionMappingResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet">
            <summary>
            Creates or updates an automatic scaling policy for a core instance group or task instance
            group in an Amazon EMR cluster. The automatic scaling policy defines how an instance
            group dynamically adds and terminates Amazon EC2 instances in response to the value
            of a CloudWatch metric.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.ClusterId">
            <summary>
            <para>
            <para>Specifies the ID of a cluster. The instance group to which the automatic scaling policy
            is applied is within this cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.InstanceGroupId">
            <summary>
            <para>
            <para>Specifies the ID of the instance group to which the automatic scaling policy is applied.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.Constraints_MaxCapacity">
            <summary>
            <para>
            <para>The upper boundary of Amazon EC2 instances in an instance group beyond which scaling
            activities are not allowed to grow. Scale-out activities will not add instances beyond
            this boundary.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.Constraints_MinCapacity">
            <summary>
            <para>
            <para>The lower boundary of Amazon EC2 instances in an instance group below which scaling
            activities are not allowed to shrink. Scale-in activities will not terminate instances
            below this boundary.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.AutoScalingPolicy_Rule">
            <summary>
            <para>
            <para>The scale-in and scale-out rules that comprise the automatic scaling policy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.PutAutoScalingPolicyResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.PutAutoScalingPolicyResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoTerminationPolicyCmdlet">
            <summary>
            <note><para>
            Auto-termination is supported in Amazon EMR releases 5.30.0 and 6.1.0 and later. For
            more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-auto-termination-policy.html">Using
            an auto-termination policy</a>.
            </para></note><para>
            Creates or updates an auto-termination policy for an Amazon EMR cluster. An auto-termination
            policy defines the amount of idle time in seconds after which a cluster automatically
            terminates. For alternative cluster termination options, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-termination.html">Control
            cluster termination</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoTerminationPolicyCmdlet.ClusterId">
            <summary>
            <para>
            <para>Specifies the ID of the Amazon EMR cluster to which the auto-termination policy will
            be attached.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoTerminationPolicyCmdlet.AutoTerminationPolicy_IdleTimeout">
            <summary>
            <para>
            <para>Specifies the amount of idle time in seconds after which the cluster automatically
            terminates. You can specify a minimum of 60 seconds and a maximum of 604800 seconds
            (seven days).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoTerminationPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.PutAutoTerminationPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoTerminationPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoTerminationPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet">
            <summary>
            Creates or updates an Amazon EMR block public access configuration for your Amazon
            Web Services account in the current Region. For more information see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/configure-block-public-access.html">Configure
            Block Public Access for Amazon EMR</a> in the <i>Amazon EMR Management Guide</i>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet.BlockPublicAccessConfiguration_BlockPublicSecurityGroupRule">
            <summary>
            <para>
            <para>Indicates whether Amazon EMR block public access is enabled (<c>true</c>) or disabled
            (<c>false</c>). By default, the value is <c>false</c> for accounts that have created
            Amazon EMR clusters before July 2019. For accounts created after this, the default
            is <c>true</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet.BlockPublicAccessConfiguration_PermittedPublicSecurityGroupRuleRange">
            <summary>
            <para>
            <para>Specifies ports and port ranges that are permitted to have security group rules that
            allow inbound traffic from all public sources. For example, if Port 23 (Telnet) is
            specified for <c>PermittedPublicSecurityGroupRuleRanges</c>, Amazon EMR allows cluster
            creation if a security group associated with the cluster has a rule that allows inbound
            traffic on Port 23 from IPv4 0.0.0.0/0 or IPv6 port ::/0 as the source.</para><para>By default, Port 22, which is used for SSH access to the cluster Amazon EC2 instances,
            is in the list of <c>PermittedPublicSecurityGroupRuleRanges</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.PutBlockPublicAccessConfigurationResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet">
            <summary>
            Creates or updates a managed scaling policy for an Amazon EMR cluster. The managed
            scaling policy defines the limits for resources, such as Amazon EC2 instances that
            can be added or terminated from a cluster. The policy only applies to the core and
            task nodes. The master node cannot be scaled after initial configuration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ClusterId">
            <summary>
            <para>
            <para>Specifies the ID of an Amazon EMR cluster where the managed scaling policy is attached.
            </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_MaximumCapacityUnit">
            <summary>
            <para>
            <para> The upper boundary of Amazon EC2 units. It is measured through vCPU cores or instances
            for instance groups and measured through units for instance fleets. Managed scaling
            activities are not allowed beyond this boundary. The limit only applies to the core
            and task nodes. The master node cannot be scaled after initial configuration. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_MaximumCoreCapacityUnit">
            <summary>
            <para>
            <para> The upper boundary of Amazon EC2 units for core node type in a cluster. It is measured
            through vCPU cores or instances for instance groups and measured through units for
            instance fleets. The core units are not allowed to scale beyond this boundary. The
            parameter is used to split capacity allocation between core and task nodes. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_MaximumOnDemandCapacityUnit">
            <summary>
            <para>
            <para> The upper boundary of On-Demand Amazon EC2 units. It is measured through vCPU cores
            or instances for instance groups and measured through units for instance fleets. The
            On-Demand units are not allowed to scale beyond this boundary. The parameter is used
            to split capacity allocation between On-Demand and Spot Instances. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_MinimumCapacityUnit">
            <summary>
            <para>
            <para> The lower boundary of Amazon EC2 units. It is measured through vCPU cores or instances
            for instance groups and measured through units for instance fleets. Managed scaling
            activities are not allowed beyond this boundary. The limit only applies to the core
            and task nodes. The master node cannot be scaled after initial configuration. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_UnitType">
            <summary>
            <para>
            <para> The unit type used for specifying a managed scaling policy. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.PutManagedScalingPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
    </members>
</doc>