AWS.Tools.ElasticMapReduce.XML

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>AWS.Tools.ElasticMapReduce</name>
    </assembly>
    <members>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet">
            <summary>
            Adds an instance fleet to a running cluster.
             
             <note><para>
            The instance fleet configuration is available only in Amazon EMR versions 4.8.0 and
            later, excluding 5.0.x.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.OnDemandSpecification_AllocationStrategy">
            <summary>
            <para>
            <para> Specifies the strategy to use in launching On-Demand Instance fleets. Currently,
            the only option is lowest-price (the default), which launches the lowest price first.
            </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotSpecification_AllocationStrategy">
            <summary>
            <para>
            <para> Specifies the strategy to use in launching Spot Instance fleets. Currently, the only
            option is capacity-optimized (the default), which launches instances from Spot Instance
            pools with optimal capacity for the number of instances that are launching. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotSpecification_BlockDurationMinute">
            <summary>
            <para>
            <para>The defined duration for Spot Instances (also known as Spot blocks) in minutes. When
            specified, the Spot Instance does not terminate before the defined duration expires,
            and defined duration pricing for Spot instances applies. Valid values are 60, 120,
            180, 240, 300, or 360. The duration period starts as soon as a Spot Instance receives
            its instance ID. At the end of the duration, Amazon EC2 marks the Spot Instance for
            termination and provides a Spot Instance termination notice, which gives the instance
            a two-minute warning before it terminates. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.ClusterId">
            <summary>
            <para>
            <para>The unique identifier of the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_InstanceFleetType">
            <summary>
            <para>
            <para>The node type that the instance fleet hosts. Valid values are MASTER,CORE,and TASK.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_InstanceTypeConfig">
            <summary>
            <para>
            <para>The instance type configurations that define the EC2 instances in the instance fleet.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_Name">
            <summary>
            <para>
            <para>The friendly name of the instance fleet.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_TargetOnDemandCapacity">
            <summary>
            <para>
            <para>The target capacity of On-Demand units for the instance fleet, which determines how
            many On-Demand Instances to provision. When the instance fleet launches, Amazon EMR
            tries to provision On-Demand Instances as specified by <a>InstanceTypeConfig</a>.
            Each instance configuration has a specified <code>WeightedCapacity</code>. When an
            On-Demand Instance is provisioned, the <code>WeightedCapacity</code> units count toward
            the target capacity. Amazon EMR provisions instances until the target capacity is
            totally fulfilled, even if this results in an overage. For example, if there are 2
            units remaining to fulfill capacity, and Amazon EMR can only provision an instance
            with a <code>WeightedCapacity</code> of 5 units, the instance is provisioned, and
            the target capacity is exceeded by 3 units.</para><note><para>If not specified or set to 0, only Spot Instances are provisioned for the instance
            fleet using <code>TargetSpotCapacity</code>. At least one of <code>TargetSpotCapacity</code>
            and <code>TargetOnDemandCapacity</code> should be greater than 0. For a master instance
            fleet, only one of <code>TargetSpotCapacity</code> and <code>TargetOnDemandCapacity</code>
            can be specified, and its value must be 1.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.InstanceFleet_TargetSpotCapacity">
            <summary>
            <para>
            <para>The target capacity of Spot units for the instance fleet, which determines how many
            Spot Instances to provision. When the instance fleet launches, Amazon EMR tries to
            provision Spot Instances as specified by <a>InstanceTypeConfig</a>. Each instance
            configuration has a specified <code>WeightedCapacity</code>. When a Spot Instance
            is provisioned, the <code>WeightedCapacity</code> units count toward the target capacity.
            Amazon EMR provisions instances until the target capacity is totally fulfilled, even
            if this results in an overage. For example, if there are 2 units remaining to fulfill
            capacity, and Amazon EMR can only provision an instance with a <code>WeightedCapacity</code>
            of 5 units, the instance is provisioned, and the target capacity is exceeded by 3
            units.</para><note><para>If not specified or set to 0, only On-Demand Instances are provisioned for the instance
            fleet. At least one of <code>TargetSpotCapacity</code> and <code>TargetOnDemandCapacity</code>
            should be greater than 0. For a master instance fleet, only one of <code>TargetSpotCapacity</code>
            and <code>TargetOnDemandCapacity</code> can be specified, and its value must be 1.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotSpecification_TimeoutAction">
            <summary>
            <para>
            <para>The action to take when <code>TargetSpotCapacity</code> has not been fulfilled when
            the <code>TimeoutDurationMinutes</code> has expired; that is, when all Spot Instances
            could not be provisioned within the Spot provisioning timeout. Valid values are <code>TERMINATE_CLUSTER</code>
            and <code>SWITCH_TO_ON_DEMAND</code>. SWITCH_TO_ON_DEMAND specifies that if no Spot
            Instances are available, On-Demand Instances should be provisioned to fulfill any
            remaining Spot capacity.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.SpotSpecification_TimeoutDurationMinute">
            <summary>
            <para>
            <para>The spot provisioning timeout period in minutes. If Spot Instances are not provisioned
            within this time period, the <code>TimeOutAction</code> is taken. Minimum value is
            5 and maximum value is 1440. The timeout applies only during initial provisioning,
            when the cluster is first created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.AddInstanceFleetResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.AddInstanceFleetResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceFleetCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet">
            <summary>
            Adds one or more instance groups to a running cluster.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.InstanceGroup">
            <summary>
            <para>
            <para>Instance groups to add.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.JobFlowId">
            <summary>
            <para>
            <para>Job flow in which to add the instance groups.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.AddInstanceGroupsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.AddInstanceGroupsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the JobFlowId parameter.
            The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRInstanceGroupCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet">
            <summary>
            AddJobFlowSteps adds new steps to a running cluster. A maximum of 256 steps are allowed
            in each job flow.
             
              
            <para>
            If your cluster is long-running (such as a Hive data warehouse) or complex, you may
            require more than 256 steps to process your data. You can bypass the 256-step limitation
            in various ways, including using SSH to connect to the master node and submitting
            queries directly to the software running on the master node, such as Hive and Hadoop.
            For more information on how to do this, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/AddMoreThan256Steps.html">Add
            More than 256 Steps to a Cluster</a> in the <i>Amazon EMR Management Guide</i>.
            </para><para>
            A step specifies the location of a JAR file stored either on the master node of the
            cluster or in Amazon S3. Each step is performed by the main function of the main class
            of the JAR file. The main class can be specified either in the manifest of the JAR
            or by using the MainFunction parameter of the step.
            </para><para>
            Amazon EMR executes each step in the order listed. For a step to be considered complete,
            the main function must exit with a zero exit code and all Hadoop jobs started while
            the step was running must have completed and run successfully.
            </para><para>
            You can only add steps to a cluster that is in one of the following states: STARTING,
            BOOTSTRAPPING, RUNNING, or WAITING.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.JobFlowId">
            <summary>
            <para>
            <para>A string that uniquely identifies the job flow. This identifier is returned by <a>RunJobFlow</a>
            and can also be obtained from <a>ListClusters</a>. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.Step">
            <summary>
            <para>
            <para> A list of <a>StepConfig</a> to be executed by the job flow. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'StepIds'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.AddJobFlowStepsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.AddJobFlowStepsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the JobFlowId parameter.
            The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRJobFlowStepCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet">
            <summary>
            Adds tags to an Amazon EMR resource. Tags make it easier to associate clusters in
            various ways, such as grouping clusters to track your Amazon EMR resource allocation
            costs. For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-tags.html">Tag
            Clusters</a>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.ResourceId">
            <summary>
            <para>
            <para>The Amazon EMR resource identifier to which tags will be added. This value must be
            a cluster identifier.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.Tag">
            <summary>
            <para>
            <para>A list of tags to associate with a cluster and propagate to EC2 instances. Tags are
            user-defined key-value pairs that consist of a required key string with a maximum
            of 128 characters, and an optional value string with a maximum of 256 characters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.AddTagsResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.PassThru">
            <summary>
            Returns the collection of Tag objects that were added
            The -PassThru parameter is deprecated, use -Select instead. This parameter will be removed in future
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.AddEMRResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet">
            <summary>
            Modifies the number of steps that can be executed concurrently for the cluster specified
            using ClusterID.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.ClusterId">
            <summary>
            <para>
            <para>The unique identifier of the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.StepConcurrencyLevel">
            <summary>
            <para>
            <para>The number of steps that can be executed concurrently. You can specify a maximum of
            256 steps. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'StepConcurrencyLevel'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ModifyClusterResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ModifyClusterResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRClusterCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet">
            <summary>
            Modifies the target On-Demand and target Spot capacities for the instance fleet with
            the specified InstanceFleetID within the cluster specified using ClusterID. The call
            either succeeds or fails atomically.
             
             <note><para>
            The instance fleet configuration is available only in Amazon EMR versions 4.8.0 and
            later, excluding 5.0.x versions.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.ClusterId">
            <summary>
            <para>
            <para>The unique identifier of the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.InstanceFleet_InstanceFleetId">
            <summary>
            <para>
            <para>A unique identifier for the instance fleet.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.InstanceFleet_TargetOnDemandCapacity">
            <summary>
            <para>
            <para>The target capacity of On-Demand units for the instance fleet. For more information
            see <a>InstanceFleetConfig$TargetOnDemandCapacity</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.InstanceFleet_TargetSpotCapacity">
            <summary>
            <para>
            <para>The target capacity of Spot units for the instance fleet. For more information, see
            <a>InstanceFleetConfig$TargetSpotCapacity</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ModifyInstanceFleetResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceFleetCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet">
            <summary>
            ModifyInstanceGroups modifies the number of nodes and configuration settings of an
            instance group. The input parameters include the new target instance count for the
            group and the instance group ID. The call will either succeed or fail atomically.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.ClusterId">
            <summary>
            <para>
            <para>The ID of the cluster to which the instance group belongs.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.InstanceGroup">
            <summary>
            <para>
            <para>Instance groups to change.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ModifyInstanceGroupsResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.EditEMRInstanceGroupCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRBlockPublicAccessConfigurationCmdlet">
            <summary>
            Returns the Amazon EMR block public access configuration for your AWS account in the
            current Region. For more information see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/configure-block-public-access.html">Configure
            Block Public Access for Amazon EMR</a> in the <i>Amazon EMR Management Guide</i>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBlockPublicAccessConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.GetBlockPublicAccessConfigurationResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.GetBlockPublicAccessConfigurationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet">
            <summary>
            Provides information about the bootstrap actions associated with a cluster.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.ClusterId">
            <summary>
            <para>
            <para>The cluster identifier for the bootstrap actions to list.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the next set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'BootstrapActions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListBootstrapActionsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListBootstrapActionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRBootstrapActionListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterCmdlet">
            <summary>
            Provides cluster-level details including status, hardware and software configuration,
            VPC settings, and so on.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterCmdlet.ClusterId">
            <summary>
            <para>
            <para>The identifier of the cluster to describe.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Cluster'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeClusterResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeClusterResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet">
            <summary>
            Provides the status of all clusters visible to this AWS account. Allows you to filter
            the list of clusters based on certain criteria; for example, filtering by cluster
            creation date and time or by status. This call returns a maximum of 50 clusters per
            call, but returns a marker to track the paging of the cluster list across multiple
            ListClusters calls.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.ClusterState">
            <summary>
            <para>
            <para>The cluster state filters to apply when listing clusters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.CreatedAfter">
            <summary>
            <para>
            <para>The creation date and time beginning value filter for listing clusters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.CreatedBefore">
            <summary>
            <para>
            <para>The creation date and time end value filter for listing clusters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the next set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Clusters'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListClustersResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListClustersResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRClusterListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet">
            <summary>
            Lists all available details about the instance fleets in a cluster.
             
             <note><para>
            The instance fleet configuration is available only in Amazon EMR versions 4.8.0 and
            later, excluding 5.0.x versions.
            </para></note><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.ClusterId">
            <summary>
            <para>
            <para>The unique identifier of the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the next set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'InstanceFleets'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListInstanceFleetsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListInstanceFleetsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceFleetListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet">
            <summary>
            Provides all available details about the instance groups in a cluster.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.ClusterId">
            <summary>
            <para>
            <para>The identifier of the cluster for which to list the instance groups.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the next set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'InstanceGroups'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListInstanceGroupsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListInstanceGroupsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceGroupListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet">
            <summary>
            Provides information for all active EC2 instances and EC2 instances terminated in
            the last 30 days, up to a maximum of 2,000. EC2 instances in any of the following
            states are considered active: AWAITING_FULFILLMENT, PROVISIONING, BOOTSTRAPPING, RUNNING.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.ClusterId">
            <summary>
            <para>
            <para>The identifier of the cluster for which to list the instances.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceFleetId">
            <summary>
            <para>
            <para>The unique identifier of the instance fleet.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceFleetType">
            <summary>
            <para>
            <para>The node type of the instance fleet. For example MASTER, CORE, or TASK.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceGroupId">
            <summary>
            <para>
            <para>The identifier of the instance group for which to list the instances.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceGroupType">
            <summary>
            <para>
            <para>The type of instance group for which to list the instances.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.InstanceState">
            <summary>
            <para>
            <para>A list of instance states that will filter the instances returned with this request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the next set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Instances'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListInstancesResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListInstancesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the InstanceGroupId parameter.
            The -PassThru parameter is deprecated, use -Select '^InstanceGroupId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRInstanceListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet">
            <summary>
            This API is no longer supported and will eventually be removed. We recommend you use
            <a>ListClusters</a>, <a>DescribeCluster</a>, <a>ListSteps</a>, <a>ListInstanceGroups</a>
            and <a>ListBootstrapActions</a> instead.
             
              
            <para>
            DescribeJobFlows returns a list of job flows that match all of the supplied parameters.
            The parameters can include a list of job flow IDs, job flow states, and restrictions
            on job flow creation date and time.
            </para><para>
            Regardless of supplied parameters, only job flows created within the last two months
            are returned.
            </para><para>
            If no parameters are supplied, then job flows matching either of the following criteria
            are returned:
            </para><ul><li><para>
            Job flows created and completed in the last two weeks
            </para></li><li><para>
             Job flows created within the last two months that are in one of the following states:
            <code>RUNNING</code>, <code>WAITING</code>, <code>SHUTTING_DOWN</code>, <code>STARTING</code></para></li></ul><para>
            Amazon EMR can return a maximum of 512 job flow descriptions.
            </para><br/><br/>This operation is deprecated.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.CreatedAfter">
            <summary>
            <para>
            <para>Return only job flows created after this date and time.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.CreatedBefore">
            <summary>
            <para>
            <para>Return only job flows created before this date and time.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.JobFlowId">
            <summary>
            <para>
            <para>Return only job flows whose job flow ID is contained in this list.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.JobFlowState">
            <summary>
            <para>
            <para>Return only job flows whose state is contained in this list.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'JobFlows'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeJobFlowsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeJobFlowsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRJobFlowCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the JobFlowId parameter.
            The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRManagedScalingPolicyCmdlet">
            <summary>
            Fetches the attached managed scaling policy for an Amazon EMR cluster.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRManagedScalingPolicyCmdlet.ClusterId">
            <summary>
            <para>
            <para>Specifies the ID of the cluster for which the managed scaling policy will be fetched.
            </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRManagedScalingPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ManagedScalingPolicy'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.GetManagedScalingPolicyResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.GetManagedScalingPolicyResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRManagedScalingPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionCmdlet">
            <summary>
            Provides details of a notebook execution.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionCmdlet.NotebookExecutionId">
            <summary>
            <para>
            <para>The unique identifier of the notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'NotebookExecution'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeNotebookExecutionResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeNotebookExecutionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the NotebookExecutionId parameter.
            The -PassThru parameter is deprecated, use -Select '^NotebookExecutionId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet">
            <summary>
            Provides summaries of all notebook executions. You can filter the list based on multiple
            criteria such as status, time range, and editor id. Returns a maximum of 50 notebook
            executions and a marker to track the paging of a longer notebook execution list across
            multiple <code>ListNotebookExecution</code> calls.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.EditorId">
            <summary>
            <para>
            <para>The unique ID of the editor associated with the notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.From">
            <summary>
            <para>
            <para>The beginning of time range filter for listing notebook executions. The default is
            the timestamp of 30 days ago.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.Status">
            <summary>
            <para>
            <para>The status filter for listing notebook executions.</para><ul><li><para><code>START_PENDING</code> indicates that the cluster has received the execution
            request but execution has not begun.</para></li><li><para><code>STARTING</code> indicates that the execution is starting on the cluster.</para></li><li><para><code>RUNNING</code> indicates that the execution is being processed by the cluster.</para></li><li><para><code>FINISHING</code> indicates that execution processing is in the final stages.</para></li><li><para><code>FINISHED</code> indicates that the execution has completed without error.</para></li><li><para><code>FAILING</code> indicates that the execution is failing and will not finish
            successfully.</para></li><li><para><code>FAILED</code> indicates that the execution failed.</para></li><li><para><code>STOP_PENDING</code> indicates that the cluster has received a <code>StopNotebookExecution</code>
            request and the stop is pending.</para></li><li><para><code>STOPPING</code> indicates that the cluster is in the process of stopping the
            execution as a result of a <code>StopNotebookExecution</code> request.</para></li><li><para><code>STOPPED</code> indicates that the execution stopped because of a <code>StopNotebookExecution</code>
            request.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.To">
            <summary>
            <para>
            <para>The end of time range filter for listing notebook executions. The default is the current
            timestamp.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token, returned by a previous <code>ListNotebookExecutions</code> call,
            that indicates the start of the list for this <code>ListNotebookExecutions</code>
            call.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'NotebookExecutions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListNotebookExecutionsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListNotebookExecutionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRNotebookExecutionListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationCmdlet">
            <summary>
            Provides the details of a security configuration by returning the configuration JSON.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationCmdlet.Name">
            <summary>
            <para>
            <para>The name of the security configuration.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeSecurityConfigurationResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeSecurityConfigurationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationListCmdlet">
            <summary>
            Lists all the security configurations visible to this account, providing their creation
            dates and times, and their names. This call returns a maximum of 50 clusters per call,
            but returns a marker to track the paging of the cluster list across multiple ListSecurityConfigurations
            calls.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SecurityConfigurations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListSecurityConfigurationsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListSecurityConfigurationsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRSecurityConfigurationListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet">
            <summary>
            Provides more detail about the cluster step.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet.ClusterId">
            <summary>
            <para>
            <para>The identifier of the cluster with steps to describe.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet.StepId">
            <summary>
            <para>
            <para>The identifier of the step to describe.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Step'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeStepResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeStepResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the StepId parameter.
            The -PassThru parameter is deprecated, use -Select '^StepId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet">
            <summary>
            Provides a list of steps for the cluster in reverse order unless you specify <code>stepIds</code>
            with the request of filter by <code>StepStates</code>. You can specify a maximum of
            ten <code>stepIDs</code>.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.ClusterId">
            <summary>
            <para>
            <para>The identifier of the cluster for which to list the steps.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.StepId">
            <summary>
            <para>
            <para>The filter to limit the step list based on the identifier of the steps. You can specify
            a maximum of ten Step IDs. The character constraint applies to the overall length
            of the array.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.StepState">
            <summary>
            <para>
            <para>The filter to limit the step list based on certain states.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the next set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Steps'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListStepsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListStepsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStepListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioCmdlet">
            <summary>
            <note><para>
            The Amazon EMR Studio APIs are in preview release for Amazon EMR and are subject to
            change.
            </para></note><para>
            Returns details for the specified Amazon EMR Studio including ID, Name, VPC, Studio
            access URL, and so on.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioCmdlet.StudioId">
            <summary>
            <para>
            <para>The Amazon EMR Studio ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Studio'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DescribeStudioResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.DescribeStudioResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the StudioId parameter.
            The -PassThru parameter is deprecated, use -Select '^StudioId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioListCmdlet">
            <summary>
            <note><para>
            The Amazon EMR Studio APIs are in preview release for Amazon EMR and are subject to
            change.
            </para></note><para>
            Returns a list of all Amazon EMR Studios associated with the AWS account. The list
            includes details such as ID, Studio Access URL, and creation time for each Studio.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Studios'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListStudiosResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListStudiosResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet">
            <summary>
            <note><para>
            The Amazon EMR Studio APIs are in preview release for Amazon EMR and are subject to
            change.
            </para></note><para>
            Fetches mapping details for the specified Amazon EMR Studio and identity (user or
            group).
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.IdentityId">
            <summary>
            <para>
            <para>The globally unique identifier (GUID) of the user or group. For more information,
            see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserId</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-GroupId">GroupId</a>
            in the <i>AWS SSO Identity Store API Reference</i>. Either <code>IdentityName</code>
            or <code>IdentityId</code> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.IdentityName">
            <summary>
            <para>
            <para>The name of the user or group to fetch. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserName</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-DisplayName">DisplayName</a>
            in the <i>AWS SSO Identity Store API Reference</i>. Either <code>IdentityName</code>
            or <code>IdentityId</code> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.IdentityType">
            <summary>
            <para>
            <para>Specifies whether the identity to fetch is a user or a group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.StudioId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SessionMapping'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.GetStudioSessionMappingResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.GetStudioSessionMappingResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet">
            <summary>
            <note><para>
            The Amazon EMR Studio APIs are in preview release for Amazon EMR and are subject to
            change.
            </para></note><para>
            Returns a list of all user or group session mappings for the EMR Studio specified
            by <code>StudioId</code>.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.IdentityType">
            <summary>
            <para>
            <para>Specifies whether to return session mappings for users or groups. If not specified,
            the results include session mapping details for both users and groups.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.StudioId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.Marker">
            <summary>
            <para>
            <para>The pagination token that indicates the set of results to retrieve.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'SessionMappings'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.ListStudioSessionMappingsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.ListStudioSessionMappingsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.GetEMRStudioSessionMappingListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet">
            <summary>
            Creates a security configuration, which is stored in the service and can be specified
            when a cluster is created.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.Name">
            <summary>
            <para>
            <para>The name of the security configuration.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.SecurityConfiguration">
            <summary>
            <para>
            <para>The security configuration details in JSON format. For JSON parameters and examples,
            see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-security-configurations.html">Use
            Security Configurations to Set Up Cluster Security</a> in the <i>Amazon EMR Management
            Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.CreateSecurityConfigurationResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.CreateSecurityConfigurationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the SecurityConfiguration parameter.
            The -PassThru parameter is deprecated, use -Select '^SecurityConfiguration' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRSecurityConfigurationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet">
            <summary>
            <note><para>
            The Amazon EMR Studio APIs are in preview release for Amazon EMR and are subject to
            change.
            </para></note><para>
            Creates a new Amazon EMR Studio.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.AuthMode">
            <summary>
            <para>
            <para>Specifies whether the Studio authenticates users using single sign-on (SSO) or IAM.
            Amazon EMR Studio currently only supports SSO authentication.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.DefaultS3Location">
            <summary>
            <para>
            <para>The default Amazon S3 location to back up EMR Studio Workspaces and notebook files.
            A Studio user can select an alternative Amazon S3 location when creating a Workspace.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Description">
            <summary>
            <para>
            <para>A detailed description of the Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.EngineSecurityGroupId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio Engine security group. The Engine security group allows
            inbound network traffic from the Workspace security group, and it must be in the same
            VPC specified by <code>VpcId</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Name">
            <summary>
            <para>
            <para>A descriptive name for the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.ServiceRole">
            <summary>
            <para>
            <para>The IAM role that will be assumed by the Amazon EMR Studio. The service role provides
            a way for Amazon EMR Studio to interoperate with other AWS services.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.SubnetId">
            <summary>
            <para>
            <para>A list of subnet IDs to associate with the Studio. The subnets must belong to the
            VPC specified by <code>VpcId</code>. Studio users can create a Workspace in any of
            the specified subnets.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Tag">
            <summary>
            <para>
            <para>A list of tags to associate with the Studio. Tags are user-defined key-value pairs
            that consist of a required key string with a maximum of 128 characters, and an optional
            value string with a maximum of 256 characters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.UserRole">
            <summary>
            <para>
            <para>The IAM user role that will be assumed by users and groups logged in to a Studio.
            The permissions attached to this IAM role can be scoped down for each user or group
            using session policies.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.VpcId">
            <summary>
            <para>
            <para>The ID of the Amazon Virtual Private Cloud (Amazon VPC) to associate with the Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.WorkspaceSecurityGroupId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio Workspace security group. The Workspace security group
            allows outbound network traffic to resources in the Engine security group, and it
            must be in the same VPC specified by <code>VpcId</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.CreateStudioResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.CreateStudioResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet">
            <summary>
            <note><para>
            The Amazon EMR Studio APIs are in preview release for Amazon EMR and are subject to
            change.
            </para></note><para>
            Maps a user or group to the Amazon EMR Studio specified by <code>StudioId</code>,
            and applies a session policy to refine Studio permissions for that user or group.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.IdentityId">
            <summary>
            <para>
            <para>The globally unique identifier (GUID) of the user or group from the AWS SSO Identity
            Store. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserId</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-GroupId">GroupId</a>
            in the <i>AWS SSO Identity Store API Reference</i>. Either <code>IdentityName</code>
            or <code>IdentityId</code> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.IdentityName">
            <summary>
            <para>
            <para>The name of the user or group. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserName</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-DisplayName">DisplayName</a>
            in the <i>AWS SSO Identity Store API Reference</i>. Either <code>IdentityName</code>
            or <code>IdentityId</code> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.IdentityType">
            <summary>
            <para>
            <para>Specifies whether the identity to map to the Studio is a user or a group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.SessionPolicyArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) for the session policy that will be applied to the
            user or group. Session policies refine Studio user permissions without the need to
            use multiple IAM user roles.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.StudioId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio to which the user or group will be mapped.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.CreateStudioSessionMappingResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.NewEMRStudioSessionMappingCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet">
            <summary>
            Removes an automatic scaling policy from a specified instance group within an EMR
            cluster.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.ClusterId">
            <summary>
            <para>
            <para>Specifies the ID of a cluster. The instance group to which the automatic scaling policy
            is applied is within this cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.InstanceGroupId">
            <summary>
            <para>
            <para>Specifies the ID of the instance group to which the scaling policy is applied.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RemoveAutoScalingPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRAutoScalingPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet">
            <summary>
            Removes a managed scaling policy from a specified EMR cluster.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet.ClusterId">
            <summary>
            <para>
            <para> Specifies the ID of the cluster from which the managed scaling policy will be removed.
            </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RemoveManagedScalingPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRManagedScalingPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet">
            <summary>
            Removes tags from an Amazon EMR resource. Tags make it easier to associate clusters
            in various ways, such as grouping clusters to track your Amazon EMR resource allocation
            costs. For more information, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-plan-tags.html">Tag
            Clusters</a>.
             
              
            <para>
            The following example removes the stack tag with value Prod from a cluster:
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.ResourceId">
            <summary>
            <para>
            <para>The Amazon EMR resource identifier from which tags will be removed. This value must
            be a cluster identifier.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.TagKey">
            <summary>
            <para>
            <para>A list of tag keys to remove from a resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RemoveTagsResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.PassThru">
            <summary>
            Returns the collection of Tag keys that were removed
            The -PassThru parameter is deprecated, use -Select instead. This parameter will be removed in future
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet">
            <summary>
            Deletes a security configuration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet.Name">
            <summary>
            <para>
            <para>The name of the security configuration.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DeleteSecurityConfigurationResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRSecurityConfigurationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet">
            <summary>
            <note><para>
            The Amazon EMR Studio APIs are in preview release for Amazon EMR and are subject to
            change.
            </para></note><para>
            Removes an Amazon EMR Studio from the Studio metadata store.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet.StudioId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DeleteStudioResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the StudioId parameter.
            The -PassThru parameter is deprecated, use -Select '^StudioId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet">
            <summary>
            <note><para>
            The Amazon EMR Studio APIs are in preview release for Amazon EMR and are subject to
            change.
            </para></note><para>
            Removes a user or group from an Amazon EMR Studio.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.IdentityId">
            <summary>
            <para>
            <para>The globally unique identifier (GUID) of the user or group to remove from the Amazon
            EMR Studio. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserId</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-GroupId">GroupId</a>
            in the <i>AWS SSO Identity Store API Reference</i>. Either <code>IdentityName</code>
            or <code>IdentityId</code> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.IdentityName">
            <summary>
            <para>
            <para>The name of the user name or group to remove from the Studio. For more information,
            see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserName</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-DisplayName">DisplayName</a>
            in the <i>AWS SSO Identity Store API Reference</i>. Either <code>IdentityName</code>
            or <code>IdentityId</code> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.IdentityType">
            <summary>
            <para>
            <para>Specifies whether the identity to delete from the Studio is a user or a group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.StudioId">
            <summary>
            <para>
            <para>The ID of the Amazon EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.DeleteStudioSessionMappingResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.RemoveEMRStudioSessionMappingCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet">
            <summary>
            SetTerminationProtection locks a cluster (job flow) so the EC2 instances in the cluster
            cannot be terminated by user intervention, an API call, or in the event of a job-flow
            error. The cluster still terminates upon successful completion of the job flow. Calling
            <code>SetTerminationProtection</code> on a cluster is similar to calling the Amazon
            EC2 <code>DisableAPITermination</code> API on all EC2 instances in a cluster.
             
              
            <para><code>SetTerminationProtection</code> is used to prevent accidental termination of
            a cluster and to ensure that in the event of an error, the instances persist so that
            you can recover any data stored in their ephemeral instance storage.
            </para><para>
             To terminate a cluster that has been locked by setting <code>SetTerminationProtection</code>
            to <code>true</code>, you must first unlock the job flow by a subsequent call to <code>SetTerminationProtection</code>
            in which you set the value to <code>false</code>.
            </para><para>
             For more information, see<a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/UsingEMR_TerminationProtection.html">Managing
            Cluster Termination</a> in the <i>Amazon EMR Management Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.JobFlowId">
            <summary>
            <para>
            <para> A list of strings that uniquely identify the clusters to protect. This identifier
            is returned by <a>RunJobFlow</a> and can also be obtained from <a>DescribeJobFlows</a>
            . </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.TerminationProtected">
            <summary>
            <para>
            <para>A Boolean that indicates whether to protect the cluster and prevent the Amazon EC2
            instances in the cluster from shutting down due to API calls, user intervention, or
            job-flow error.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.SetTerminationProtectionResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the JobFlowId parameter.
            The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRTerminationProtectionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet">
            <summary>
            Sets the <a>Cluster$VisibleToAllUsers</a> value, which determines whether the cluster
            is visible to all IAM users of the AWS account associated with the cluster. Only the
            IAM user who created the cluster or the AWS account root user can call this action.
            The default value, <code>true</code>, indicates that all IAM users in the AWS account
            can perform cluster actions if they have the proper IAM policy permissions. If set
            to <code>false</code>, only the IAM user that created the cluster can perform actions.
            This action works on running clusters. You can override the default <code>true</code>
            setting when you create a cluster by using the <code>VisibleToAllUsers</code> parameter
            with <code>RunJobFlow</code>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.JobFlowId">
            <summary>
            <para>
            <para>The unique identifier of the job flow (cluster).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.VisibleToAllUser">
            <summary>
            <para>
            <para>A value of <code>true</code> indicates that all IAM users in the AWS account can perform
            cluster actions if they have the proper IAM policy permissions. This is the default.
            A value of <code>false</code> indicates that only the IAM user who created the cluster
            can perform actions.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.SetVisibleToAllUsersResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the JobFlowId parameter.
            The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.SetEMRVisibleToAllUserCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet">
            <summary>
            RunJobFlow creates and starts running a new cluster (job flow). The cluster runs the
            steps specified. After the steps complete, the cluster stops and the HDFS partition
            is lost. To prevent loss of data, configure the last step of the job flow to store
            results in Amazon S3. If the <a>JobFlowInstancesConfig</a><code>KeepJobFlowAliveWhenNoSteps</code>
            parameter is set to <code>TRUE</code>, the cluster transitions to the WAITING state
            rather than shutting down after the steps have completed.
             
              
            <para>
            For additional protection, you can set the <a>JobFlowInstancesConfig</a><code>TerminationProtected</code>
            parameter to <code>TRUE</code> to lock the cluster and prevent it from being terminated
            by API call, user intervention, or in the event of a job flow error.
            </para><para>
            A maximum of 256 steps are allowed in each job flow.
            </para><para>
            If your cluster is long-running (such as a Hive data warehouse) or complex, you may
            require more than 256 steps to process your data. You can bypass the 256-step limitation
            in various ways, including using the SSH shell to connect to the master node and submitting
            queries directly to the software running on the master node, such as Hive and Hadoop.
            For more information on how to do this, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/AddMoreThan256Steps.html">Add
            More than 256 Steps to a Cluster</a> in the <i>Amazon EMR Management Guide</i>.
            </para><para>
            For long running clusters, we recommend that you periodically store your results.
            </para><note><para>
            The instance fleets configuration is available only in Amazon EMR versions 4.8.0 and
            later, excluding 5.0.x versions. The RunJobFlow request can contain InstanceFleets
            parameters or InstanceGroups parameters, but not both.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.AdditionalInfo">
            <summary>
            <para>
            <para>A JSON string for selecting additional features.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_AdditionalMasterSecurityGroup">
            <summary>
            <para>
            <para>A list of additional Amazon EC2 security group IDs for the master node.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_AdditionalSlaveSecurityGroup">
            <summary>
            <para>
            <para>A list of additional Amazon EC2 security group IDs for the core and task nodes.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_ADDomainJoinPassword">
            <summary>
            <para>
            <para>The Active Directory password for <code>ADDomainJoinUser</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_ADDomainJoinUser">
            <summary>
            <para>
            <para>Required only when establishing a cross-realm trust with an Active Directory domain.
            A user with sufficient privileges to join resources to the domain.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.AmiVersion">
            <summary>
            <para>
            <para>Applies only to Amazon EMR AMI versions 3.x and 2.x. For Amazon EMR releases 4.0 and
            later, <code>ReleaseLabel</code> is used. To specify a custom AMI, use <code>CustomAmiID</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Application">
            <summary>
            <para>
            <para>Applies to Amazon EMR releases 4.0 and later. A case-insensitive list of applications
            for Amazon EMR to install and configure when launching the cluster. For a list of
            applications available for each Amazon EMR release version, see the <a href="https://docs.aws.amazon.com/emr/latest/ReleaseGuide/">Amazon
            EMR Release Guide</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.AutoScalingRole">
            <summary>
            <para>
            <para>An IAM role for automatic scaling policies. The default role is <code>EMR_AutoScaling_DefaultRole</code>.
            The IAM role provides permissions that the automatic scaling feature requires to launch
            and terminate EC2 instances in an instance group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Placement_AvailabilityZone">
            <summary>
            <para>
            <para>The Amazon EC2 Availability Zone for the cluster. <code>AvailabilityZone</code> is
            used for uniform instance groups, while <code>AvailabilityZones</code> (plural) is
            used for instance fleets.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Placement_AvailabilityZones">
            <summary>
            <para>
            <para>When multiple Availability Zones are specified, Amazon EMR evaluates them and launches
            instances in the optimal Availability Zone. <code>AvailabilityZones</code> is used
            for instance fleets, while <code>AvailabilityZone</code> (singular) is used for uniform
            instance groups.</para><note><para>The instance fleet configuration is available only in Amazon EMR versions 4.8.0 and
            later, excluding 5.0.x versions.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.BootstrapAction">
            <summary>
            <para>
            <para>A list of bootstrap actions to run before Hadoop starts on the cluster nodes.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Configuration">
            <summary>
            <para>
            <para>For Amazon EMR releases 4.0 and later. The list of configurations supplied for the
            EMR cluster you are creating.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_CrossRealmTrustPrincipalPassword">
            <summary>
            <para>
            <para>Required only when establishing a cross-realm trust with a KDC in a different realm.
            The cross-realm principal password, which must be identical across realms.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.CustomAmiId">
            <summary>
            <para>
            <para>Available only in Amazon EMR version 5.7.0 and later. The ID of a custom Amazon EBS-backed
            Linux AMI. If specified, Amazon EMR uses this AMI when it launches cluster EC2 instances.
            For more information about custom AMIs in Amazon EMR, see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-custom-ami.html">Using
            a Custom AMI</a> in the <i>Amazon EMR Management Guide</i>. If omitted, the cluster
            uses the base Linux AMI for the <code>ReleaseLabel</code> specified. For Amazon EMR
            versions 2.x and 3.x, use <code>AmiVersion</code> instead.</para><para>For information about creating a custom AMI, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/creating-an-ami-ebs.html">Creating
            an Amazon EBS-Backed Linux AMI</a> in the <i>Amazon Elastic Compute Cloud User Guide
            for Linux Instances</i>. For information about finding an AMI ID, see <a href="https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/finding-an-ami.html">Finding
            a Linux AMI</a>. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.EbsRootVolumeSize">
            <summary>
            <para>
            <para>The size, in GiB, of the Amazon EBS root device volume of the Linux AMI that is used
            for each EC2 instance. Available in Amazon EMR version 4.x and later.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Ec2KeyName">
            <summary>
            <para>
            <para>The name of the EC2 key pair that can be used to connect to the master node using
            SSH as the user called "hadoop."</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Ec2SubnetId">
            <summary>
            <para>
            <para>Applies to clusters that use the uniform instance group configuration. To launch the
            cluster in Amazon Virtual Private Cloud (Amazon VPC), set this parameter to the identifier
            of the Amazon VPC subnet where you want the cluster to launch. If you do not specify
            this value and your account supports EC2-Classic, the cluster launches in EC2-Classic.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_Ec2SubnetIds">
            <summary>
            <para>
            <para>Applies to clusters that use the instance fleet configuration. When multiple EC2 subnet
            IDs are specified, Amazon EMR evaluates them and launches instances in the optimal
            subnet.</para><note><para>The instance fleet configuration is available only in Amazon EMR versions 4.8.0 and
            later, excluding 5.0.x versions.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_EmrManagedMasterSecurityGroup">
            <summary>
            <para>
            <para>The identifier of the Amazon EC2 security group for the master node.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_EmrManagedSlaveSecurityGroup">
            <summary>
            <para>
            <para>The identifier of the Amazon EC2 security group for the core and task nodes.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_HadoopVersion">
            <summary>
            <para>
            <para>Applies only to Amazon EMR release versions earlier than 4.0. The Hadoop version for
            the cluster. Valid inputs are "0.18" (no longer maintained), "0.20" (no longer maintained),
            "0.20.205" (no longer maintained), "1.0.3", "2.2.0", or "2.4.0". If you do not set
            this value, the default of 0.18 is used, unless the <code>AmiVersion</code> parameter
            is set in the RunJobFlow call, in which case the default version of Hadoop for that
            AMI version is used.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_InstanceCount">
            <summary>
            <para>
            <para>The number of EC2 instances in the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_InstanceFleet">
            <summary>
            <para>
            <note><para>The instance fleet configuration is available only in Amazon EMR versions 4.8.0 and
            later, excluding 5.0.x versions.</para></note><para>Describes the EC2 instances and instance configurations for clusters that use the
            instance fleet configuration.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_InstanceGroup">
            <summary>
            <para>
            <para>Configuration for the instance groups in a cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.JobFlowRole">
            <summary>
            <para>
            <para>Also called instance profile and EC2 role. An IAM role for an EMR cluster. The EC2
            instances of the cluster assume this role. The default role is <code>EMR_EC2_DefaultRole</code>.
            In order to use the default role, you must have already created it using the CLI or
            console.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_KdcAdminPassword">
            <summary>
            <para>
            <para>The password used within the cluster for the kadmin service on the cluster-dedicated
            KDC, which maintains Kerberos principals, password policies, and keytabs for the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_KeepJobFlowAliveWhenNoStep">
            <summary>
            <para>
            <para>Specifies whether the cluster should remain available after completing all steps.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.LogEncryptionKmsKeyId">
            <summary>
            <para>
            <para>The AWS KMS customer master key (CMK) used for encrypting log files. If a value is
            not provided, the logs remain encrypted by AES-256. This attribute is only available
            with Amazon EMR version 5.30.0 and later, excluding Amazon EMR 6.0.0.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.LogUri">
            <summary>
            <para>
            <para>The location in Amazon S3 to write the log files of the job flow. If a value is not
            provided, logs are not created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_MasterInstanceType">
            <summary>
            <para>
            <para>The EC2 instance type of the master node.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_MaximumCapacityUnit">
            <summary>
            <para>
            <para> The upper boundary of EC2 units. It is measured through vCPU cores or instances for
            instance groups and measured through units for instance fleets. Managed scaling activities
            are not allowed beyond this boundary. The limit only applies to the core and task
            nodes. The master node cannot be scaled after initial configuration. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_MaximumCoreCapacityUnit">
            <summary>
            <para>
            <para> The upper boundary of EC2 units for core node type in a cluster. It is measured through
            vCPU cores or instances for instance groups and measured through units for instance
            fleets. The core units are not allowed to scale beyond this boundary. The parameter
            is used to split capacity allocation between core and task nodes. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_MaximumOnDemandCapacityUnit">
            <summary>
            <para>
            <para> The upper boundary of On-Demand EC2 units. It is measured through vCPU cores or instances
            for instance groups and measured through units for instance fleets. The On-Demand
            units are not allowed to scale beyond this boundary. The parameter is used to split
            capacity allocation between On-Demand and Spot Instances. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_MinimumCapacityUnit">
            <summary>
            <para>
            <para> The lower boundary of EC2 units. It is measured through vCPU cores or instances for
            instance groups and measured through units for instance fleets. Managed scaling activities
            are not allowed beyond this boundary. The limit only applies to the core and task
            nodes. The master node cannot be scaled after initial configuration. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Name">
            <summary>
            <para>
            <para>The name of the job flow.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.NewSupportedProduct">
            <summary>
            <para>
            <note><para>For Amazon EMR releases 3.x and 2.x. For Amazon EMR releases 4.x and later, use Applications.</para></note><para>A list of strings that indicates third-party software to use with the job flow that
            accepts a user argument list. EMR accepts and forwards the argument list to the corresponding
            installation script as bootstrap action arguments. For more information, see "Launch
            a Job Flow on the MapR Distribution for Hadoop" in the <a href="https://docs.aws.amazon.com/emr/latest/DeveloperGuide/emr-dg.pdf">Amazon
            EMR Developer Guide</a>. Supported values are:</para><ul><li><para>"mapr-m3" - launch the cluster using MapR M3 Edition.</para></li><li><para>"mapr-m5" - launch the cluster using MapR M5 Edition.</para></li><li><para>"mapr" with the user arguments specifying "--edition,m3" or "--edition,m5" - launch
            the job flow using MapR M3 or M5 Edition respectively.</para></li><li><para>"mapr-m7" - launch the cluster using MapR M7 Edition.</para></li><li><para>"hunk" - launch the cluster with the Hunk Big Data Analtics Platform.</para></li><li><para>"hue"- launch the cluster with Hue installed.</para></li><li><para>"spark" - launch the cluster with Apache Spark installed.</para></li><li><para>"ganglia" - launch the cluster with the Ganglia Monitoring System installed.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.PlacementGroupConfig">
            <summary>
            <para>
            <para>The specified placement group configuration for an Amazon EMR cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.KerberosAttributes_Realm">
            <summary>
            <para>
            <para>The name of the Kerberos realm to which all nodes in a cluster belong. For example,
            <code>EC2.INTERNAL</code>. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ReleaseLabel">
            <summary>
            <para>
            <para>The Amazon EMR release label, which determines the version of open-source application
            packages installed on the cluster. Release labels are in the form <code>emr-x.x.x</code>,
            where x.x.x is an Amazon EMR release version such as <code>emr-5.14.0</code>. For
            more information about Amazon EMR release versions and included application versions
            and features, see <a href="https://docs.aws.amazon.com/emr/latest/ReleaseGuide/">https://docs.aws.amazon.com/emr/latest/ReleaseGuide/</a>.
            The release label applies only to Amazon EMR releases version 4.0 and later. Earlier
            versions use <code>AmiVersion</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.RepoUpgradeOnBoot">
            <summary>
            <para>
            <para>Applies only when <code>CustomAmiID</code> is used. Specifies which updates from the
            Amazon Linux AMI package repositories to apply automatically when the instance boots
            using the AMI. If omitted, the default is <code>SECURITY</code>, which indicates that
            only security updates are applied. If <code>NONE</code> is specified, no updates are
            applied, and all updates must be applied manually.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ScaleDownBehavior">
            <summary>
            <para>
            <para>Specifies the way that individual Amazon EC2 instances terminate when an automatic
            scale-in activity occurs or an instance group is resized. <code>TERMINATE_AT_INSTANCE_HOUR</code>
            indicates that Amazon EMR terminates nodes at the instance-hour boundary, regardless
            of when the request to terminate the instance was submitted. This option is only available
            with Amazon EMR 5.1.0 and later and is the default for clusters created using that
            version. <code>TERMINATE_AT_TASK_COMPLETION</code> indicates that Amazon EMR adds
            nodes to a deny list and drains tasks from nodes before terminating the Amazon EC2
            instances, regardless of the instance-hour boundary. With either behavior, Amazon
            EMR removes the least active nodes first and blocks instance termination if it could
            lead to HDFS corruption. <code>TERMINATE_AT_TASK_COMPLETION</code> available only
            in Amazon EMR version 4.1.0 and later, and is the default for versions of Amazon EMR
            earlier than 5.1.0.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.SecurityConfiguration">
            <summary>
            <para>
            <para>The name of a security configuration to apply to the cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_ServiceAccessSecurityGroup">
            <summary>
            <para>
            <para>The identifier of the Amazon EC2 security group for the Amazon EMR service to access
            clusters in VPC private subnets.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ServiceRole">
            <summary>
            <para>
            <para>The IAM role that will be assumed by the Amazon EMR service to access AWS resources
            on your behalf.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_SlaveInstanceType">
            <summary>
            <para>
            <para>The EC2 instance type of the core and task nodes.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.StepConcurrencyLevel">
            <summary>
            <para>
            <para>Specifies the number of steps that can be executed concurrently. The default value
            is <code>1</code>. The maximum value is <code>256</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Step">
            <summary>
            <para>
            <para>A list of steps to run.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.SupportedProduct">
            <summary>
            <para>
            <note><para>For Amazon EMR releases 3.x and 2.x. For Amazon EMR releases 4.x and later, use Applications.</para></note><para>A list of strings that indicates third-party software to use. For more information,
            see the <a href="https://docs.aws.amazon.com/emr/latest/DeveloperGuide/emr-dg.pdf">Amazon
            EMR Developer Guide</a>. Currently supported values are:</para><ul><li><para>"mapr-m3" - launch the job flow using MapR M3 Edition.</para></li><li><para>"mapr-m5" - launch the job flow using MapR M5 Edition.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Tag">
            <summary>
            <para>
            <para>A list of tags to associate with a cluster and propagate to Amazon EC2 instances.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Instances_TerminationProtected">
            <summary>
            <para>
            <para>Specifies whether to lock the cluster to prevent the Amazon EC2 instances from being
            terminated by API call, user intervention, or in the event of a job-flow error.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.ComputeLimits_UnitType">
            <summary>
            <para>
            <para> The unit type used for specifying a managed scaling policy. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.VisibleToAllUser">
            <summary>
            <para>
            <para>A value of <code>true</code> indicates that all IAM users in the AWS account can perform
            cluster actions if they have the proper IAM policy permissions. This is the default.
            A value of <code>false</code> indicates that only the IAM user who created the cluster
            can perform actions.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'JobFlowId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.RunJobFlowResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.RunJobFlowResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRJobFlowCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet">
            <summary>
            Starts a notebook execution.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.EditorId">
            <summary>
            <para>
            <para>The unique identifier of the EMR Notebook to use for notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ExecutionEngine_Id">
            <summary>
            <para>
            <para>The unique identifier of the execution engine. For an EMR cluster, this is the cluster
            ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ExecutionEngine_MasterInstanceSecurityGroupId">
            <summary>
            <para>
            <para>An optional unique ID of an EC2 security group to associate with the master instance
            of the EMR cluster for this notebook execution. For more information see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/emr-managed-notebooks-security-groups.html">Specifying
            EC2 Security Groups for EMR Notebooks</a> in the <i>EMR Management Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.NotebookExecutionName">
            <summary>
            <para>
            <para>An optional name for the notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.NotebookInstanceSecurityGroupId">
            <summary>
            <para>
            <para>The unique identifier of the Amazon EC2 security group to associate with the EMR Notebook
            for this notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.NotebookParam">
            <summary>
            <para>
            <para>Input parameters in JSON format passed to the EMR Notebook at runtime for execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.RelativePath">
            <summary>
            <para>
            <para>The path and file name of the notebook file for this execution, relative to the path
            specified for the EMR Notebook. For example, if you specify a path of <code>s3://MyBucket/MyNotebooks</code>
            when you create an EMR Notebook for a notebook with an ID of <code>e-ABCDEFGHIJK1234567890ABCD</code>
            (the <code>EditorID</code> of this request), and you specify a <code>RelativePath</code>
            of <code>my_notebook_executions/notebook_execution.ipynb</code>, the location of the
            file for the notebook execution is <code>s3://MyBucket/MyNotebooks/e-ABCDEFGHIJK1234567890ABCD/my_notebook_executions/notebook_execution.ipynb</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ServiceRole">
            <summary>
            <para>
            <para>The name or ARN of the IAM role that is used as the service role for Amazon EMR (the
            EMR role) for the notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.Tag">
            <summary>
            <para>
            <para>A list of tags associated with a notebook execution. Tags are user-defined key-value
            pairs that consist of a required key string with a maximum of 128 characters and an
            optional value string with a maximum of 256 characters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.ExecutionEngine_Type">
            <summary>
            <para>
            <para>The type of execution engine. A value of <code>EMR</code> specifies an EMR cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'NotebookExecutionId'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.StartNotebookExecutionResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.StartNotebookExecutionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StartEMRNotebookExecutionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet">
            <summary>
            TerminateJobFlows shuts a list of clusters (job flows) down. When a job flow is shut
            down, any step not yet completed is canceled and the EC2 instances on which the cluster
            is running are stopped. Any log files not already saved are uploaded to Amazon S3
            if a LogUri was specified when the cluster was created.
             
              
            <para>
            The maximum number of clusters allowed is 10. The call to <code>TerminateJobFlows</code>
            is asynchronous. Depending on the configuration of the cluster, it may take up to
            1-5 minutes for the cluster to completely terminate and release allocated resources,
            such as Amazon EC2 instances.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet.JobFlowId">
            <summary>
            <para>
            <para>A list of job flows to be shut down.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.TerminateJobFlowsResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the JobFlowId parameter.
            The -PassThru parameter is deprecated, use -Select '^JobFlowId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRJobFlowCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet">
            <summary>
            Stops a notebook execution.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet.NotebookExecutionId">
            <summary>
            <para>
            <para>The unique identifier of the notebook execution.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.StopNotebookExecutionResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the NotebookExecutionId parameter.
            The -PassThru parameter is deprecated, use -Select '^NotebookExecutionId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRNotebookExecutionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet">
            <summary>
            Cancels a pending step or steps in a running cluster. Available only in Amazon EMR
            versions 4.8.0 and later, excluding version 5.0.0. A maximum of 256 steps are allowed
            in each CancelSteps request. CancelSteps is idempotent but asynchronous; it does not
            guarantee that a step will be canceled, even if the request is successfully submitted.
            You can only cancel steps that are in a <code>PENDING</code> state.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.ClusterId">
            <summary>
            <para>
            <para>The <code>ClusterID</code> for the specified steps that will be canceled. Use <a>RunJobFlow</a>
            and <a>ListClusters</a> to get ClusterIDs. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.StepCancellationOption">
            <summary>
            <para>
            <para>The option to choose to cancel <code>RUNNING</code> steps. By default, the value is
            <code>SEND_INTERRUPT</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.StepId">
            <summary>
            <para>
            <para>The list of <code>StepIDs</code> to cancel. Use <a>ListSteps</a> to get steps and
            their states for the specified cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'CancelStepsInfoList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.CancelStepsResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.CancelStepsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.StopEMRStepCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet">
            <summary>
            <note><para>
            The Amazon EMR Studio APIs are in preview release for Amazon EMR and are subject to
            change.
            </para></note><para>
            Updates the session policy attached to the user or group for the specified Amazon
            EMR Studio.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.IdentityId">
            <summary>
            <para>
            <para>The globally unique identifier (GUID) of the user or group. For more information,
            see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserId</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-GroupId">GroupId</a>
            in the <i>AWS SSO Identity Store API Reference</i>. Either <code>IdentityName</code>
            or <code>IdentityId</code> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.IdentityName">
            <summary>
            <para>
            <para>The name of the user or group to update. For more information, see <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_User.html#singlesignon-Type-User-UserId">UserName</a>
            and <a href="https://docs.aws.amazon.com/singlesignon/latest/IdentityStoreAPIReference/API_Group.html#singlesignon-Type-Group-DisplayName">DisplayName</a>
            in the <i>AWS SSO Identity Store API Reference</i>. Either <code>IdentityName</code>
            or <code>IdentityId</code> must be specified.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.IdentityType">
            <summary>
            <para>
            <para>Specifies whether the identity to update is a user or a group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.SessionPolicyArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the session policy to associate with the specified
            user or group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.StudioId">
            <summary>
            <para>
            <para>The ID of the EMR Studio.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.UpdateStudioSessionMappingResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.UpdateEMRStudioSessionMappingCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet">
            <summary>
            Creates or updates an automatic scaling policy for a core instance group or task instance
            group in an Amazon EMR cluster. The automatic scaling policy defines how an instance
            group dynamically adds and terminates EC2 instances in response to the value of a
            CloudWatch metric.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.ClusterId">
            <summary>
            <para>
            <para>Specifies the ID of a cluster. The instance group to which the automatic scaling policy
            is applied is within this cluster.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.InstanceGroupId">
            <summary>
            <para>
            <para>Specifies the ID of the instance group to which the automatic scaling policy is applied.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.Constraints_MaxCapacity">
            <summary>
            <para>
            <para>The upper boundary of EC2 instances in an instance group beyond which scaling activities
            are not allowed to grow. Scale-out activities will not add instances beyond this boundary.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.Constraints_MinCapacity">
            <summary>
            <para>
            <para>The lower boundary of EC2 instances in an instance group below which scaling activities
            are not allowed to shrink. Scale-in activities will not terminate instances below
            this boundary.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.AutoScalingPolicy_Rule">
            <summary>
            <para>
            <para>The scale-in and scale-out rules that comprise the automatic scaling policy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.PutAutoScalingPolicyResponse).
            Specifying the name of a property of type Amazon.ElasticMapReduce.Model.PutAutoScalingPolicyResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRAutoScalingPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet">
            <summary>
            Creates or updates an Amazon EMR block public access configuration for your AWS account
            in the current Region. For more information see <a href="https://docs.aws.amazon.com/emr/latest/ManagementGuide/configure-block-public-access.html">Configure
            Block Public Access for Amazon EMR</a> in the <i>Amazon EMR Management Guide</i>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet.BlockPublicAccessConfiguration_BlockPublicSecurityGroupRule">
            <summary>
            <para>
            <para>Indicates whether Amazon EMR block public access is enabled (<code>true</code>) or
            disabled (<code>false</code>). By default, the value is <code>false</code> for accounts
            that have created EMR clusters before July 2019. For accounts created after this,
            the default is <code>true</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet.BlockPublicAccessConfiguration_PermittedPublicSecurityGroupRuleRange">
            <summary>
            <para>
            <para>Specifies ports and port ranges that are permitted to have security group rules that
            allow inbound traffic from all public sources. For example, if Port 23 (Telnet) is
            specified for <code>PermittedPublicSecurityGroupRuleRanges</code>, Amazon EMR allows
            cluster creation if a security group associated with the cluster has a rule that allows
            inbound traffic on Port 23 from IPv4 0.0.0.0/0 or IPv6 port ::/0 as the source.</para><para>By default, Port 22, which is used for SSH access to the cluster EC2 instances, is
            in the list of <code>PermittedPublicSecurityGroupRuleRanges</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.PutBlockPublicAccessConfigurationResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRBlockPublicAccessConfigurationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet">
            <summary>
            Creates or updates a managed scaling policy for an Amazon EMR cluster. The managed
            scaling policy defines the limits for resources, such as EC2 instances that can be
            added or terminated from a cluster. The policy only applies to the core and task nodes.
            The master node cannot be scaled after initial configuration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ClusterId">
            <summary>
            <para>
            <para>Specifies the ID of an EMR cluster where the managed scaling policy is attached. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_MaximumCapacityUnit">
            <summary>
            <para>
            <para> The upper boundary of EC2 units. It is measured through vCPU cores or instances for
            instance groups and measured through units for instance fleets. Managed scaling activities
            are not allowed beyond this boundary. The limit only applies to the core and task
            nodes. The master node cannot be scaled after initial configuration. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_MaximumCoreCapacityUnit">
            <summary>
            <para>
            <para> The upper boundary of EC2 units for core node type in a cluster. It is measured through
            vCPU cores or instances for instance groups and measured through units for instance
            fleets. The core units are not allowed to scale beyond this boundary. The parameter
            is used to split capacity allocation between core and task nodes. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_MaximumOnDemandCapacityUnit">
            <summary>
            <para>
            <para> The upper boundary of On-Demand EC2 units. It is measured through vCPU cores or instances
            for instance groups and measured through units for instance fleets. The On-Demand
            units are not allowed to scale beyond this boundary. The parameter is used to split
            capacity allocation between On-Demand and Spot Instances. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_MinimumCapacityUnit">
            <summary>
            <para>
            <para> The lower boundary of EC2 units. It is measured through vCPU cores or instances for
            instance groups and measured through units for instance fleets. Managed scaling activities
            are not allowed beyond this boundary. The limit only applies to the core and task
            nodes. The master node cannot be scaled after initial configuration. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.ComputeLimits_UnitType">
            <summary>
            <para>
            <para> The unit type used for specifying a managed scaling policy. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ElasticMapReduce.Model.PutManagedScalingPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ClusterId parameter.
            The -PassThru parameter is deprecated, use -Select '^ClusterId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMR.WriteEMRManagedScalingPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
    </members>
</doc>