AWS.Tools.FIS.XML

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>AWS.Tools.FIS</name>
    </assembly>
    <members>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.AddFISResourceTagCmdlet">
            <summary>
            Applies the specified tags to the specified resource.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.AddFISResourceTagCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.AddFISResourceTagCmdlet.Tag">
            <summary>
            <para>
            <para>The tags for the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.AddFISResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.TagResourceResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.AddFISResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceArn parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.AddFISResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISActionCmdlet">
            <summary>
            Gets information about the specified FIS action.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISActionCmdlet.Id">
            <summary>
            <para>
            <para>The ID of the action.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISActionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Action'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.GetActionResponse).
            Specifying the name of a property of type Amazon.FIS.Model.GetActionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISActionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Id parameter.
            The -PassThru parameter is deprecated, use -Select '^Id' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISActionListCmdlet">
            <summary>
            Lists the available FIS actions.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISActionListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to return with a single call. To retrieve the remaining
            results, make another call with the returned <c>nextToken</c> value.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISActionListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next page of results.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISActionListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Actions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.ListActionsResponse).
            Specifying the name of a property of type Amazon.FIS.Model.ListActionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentCmdlet">
            <summary>
            Gets information about the specified experiment.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentCmdlet.Id">
            <summary>
            <para>
            <para>The ID of the experiment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Experiment'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.GetExperimentResponse).
            Specifying the name of a property of type Amazon.FIS.Model.GetExperimentResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Id parameter.
            The -PassThru parameter is deprecated, use -Select '^Id' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentListCmdlet">
            <summary>
            Lists your experiments.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentListCmdlet.ExperimentTemplateId">
            <summary>
            <para>
            <para>The ID of the experiment template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to return with a single call. To retrieve the remaining
            results, make another call with the returned <c>nextToken</c> value.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next page of results.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Experiments'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.ListExperimentsResponse).
            Specifying the name of a property of type Amazon.FIS.Model.ListExperimentsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ExperimentTemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^ExperimentTemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentResolvedTargetListCmdlet">
            <summary>
            Lists the resolved targets information of the specified experiment.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentResolvedTargetListCmdlet.ExperimentId">
            <summary>
            <para>
            <para>The ID of the experiment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentResolvedTargetListCmdlet.TargetName">
            <summary>
            <para>
            <para>The name of the target.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentResolvedTargetListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to return with a single call. To retrieve the remaining
            results, make another call with the returned nextToken value.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentResolvedTargetListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next page of results.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentResolvedTargetListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ResolvedTargets'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.ListExperimentResolvedTargetsResponse).
            Specifying the name of a property of type Amazon.FIS.Model.ListExperimentResolvedTargetsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentResolvedTargetListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ExperimentId parameter.
            The -PassThru parameter is deprecated, use -Select '^ExperimentId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTargetAccountConfigurationCmdlet">
            <summary>
            Gets information about the specified target account configuration of the experiment.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTargetAccountConfigurationCmdlet.AccountId">
            <summary>
            <para>
            <para>The Amazon Web Services account ID of the target account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTargetAccountConfigurationCmdlet.ExperimentId">
            <summary>
            <para>
            <para>The ID of the experiment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTargetAccountConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TargetAccountConfiguration'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.GetExperimentTargetAccountConfigurationResponse).
            Specifying the name of a property of type Amazon.FIS.Model.GetExperimentTargetAccountConfigurationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTargetAccountConfigurationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ExperimentId parameter.
            The -PassThru parameter is deprecated, use -Select '^ExperimentId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTargetAccountConfigurationListCmdlet">
            <summary>
            Lists the target account configurations of the specified experiment.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTargetAccountConfigurationListCmdlet.ExperimentId">
            <summary>
            <para>
            <para>The ID of the experiment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTargetAccountConfigurationListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next page of results.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTargetAccountConfigurationListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TargetAccountConfigurations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.ListExperimentTargetAccountConfigurationsResponse).
            Specifying the name of a property of type Amazon.FIS.Model.ListExperimentTargetAccountConfigurationsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTargetAccountConfigurationListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ExperimentId parameter.
            The -PassThru parameter is deprecated, use -Select '^ExperimentId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTemplateCmdlet">
            <summary>
            Gets information about the specified experiment template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTemplateCmdlet.Id">
            <summary>
            <para>
            <para>The ID of the experiment template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTemplateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ExperimentTemplate'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.GetExperimentTemplateResponse).
            Specifying the name of a property of type Amazon.FIS.Model.GetExperimentTemplateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTemplateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Id parameter.
            The -PassThru parameter is deprecated, use -Select '^Id' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTemplateListCmdlet">
            <summary>
            Lists your experiment templates.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTemplateListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to return with a single call. To retrieve the remaining
            results, make another call with the returned <c>nextToken</c> value.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTemplateListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next page of results.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISExperimentTemplateListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ExperimentTemplates'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.ListExperimentTemplatesResponse).
            Specifying the name of a property of type Amazon.FIS.Model.ListExperimentTemplatesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISResourceTagCmdlet">
            <summary>
            Lists the tags for the specified resource.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISResourceTagCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Tags'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.ListTagsForResourceResponse).
            Specifying the name of a property of type Amazon.FIS.Model.ListTagsForResourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceArn parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetAccountConfigurationCmdlet">
            <summary>
            Gets information about the specified target account configuration of the experiment
            template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetAccountConfigurationCmdlet.AccountId">
            <summary>
            <para>
            <para>The Amazon Web Services account ID of the target account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetAccountConfigurationCmdlet.ExperimentTemplateId">
            <summary>
            <para>
            <para>The ID of the experiment template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetAccountConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TargetAccountConfiguration'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.GetTargetAccountConfigurationResponse).
            Specifying the name of a property of type Amazon.FIS.Model.GetTargetAccountConfigurationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetAccountConfigurationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ExperimentTemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^ExperimentTemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetAccountConfigurationListCmdlet">
            <summary>
            Lists the target account configurations of the specified experiment template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetAccountConfigurationListCmdlet.ExperimentTemplateId">
            <summary>
            <para>
            <para>The ID of the experiment template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetAccountConfigurationListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to return with a single call. To retrieve the remaining
            results, make another call with the returned nextToken value.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetAccountConfigurationListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next page of results.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetAccountConfigurationListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TargetAccountConfigurations'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.ListTargetAccountConfigurationsResponse).
            Specifying the name of a property of type Amazon.FIS.Model.ListTargetAccountConfigurationsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetAccountConfigurationListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ExperimentTemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^ExperimentTemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetResourceTypeCmdlet">
            <summary>
            Gets information about the specified resource type.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetResourceTypeCmdlet.ResourceType">
            <summary>
            <para>
            <para>The resource type.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetResourceTypeCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TargetResourceType'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.GetTargetResourceTypeResponse).
            Specifying the name of a property of type Amazon.FIS.Model.GetTargetResourceTypeResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetResourceTypeCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceType parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceType' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetResourceTypeListCmdlet">
            <summary>
            Lists the target resource types.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetResourceTypeListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to return with a single call. To retrieve the remaining
            results, make another call with the returned <c>nextToken</c> value.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetResourceTypeListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next page of results.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.GetFISTargetResourceTypeListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TargetResourceTypes'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.ListTargetResourceTypesResponse).
            Specifying the name of a property of type Amazon.FIS.Model.ListTargetResourceTypesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet">
            <summary>
            Creates an experiment template.
             
              
            <para>
            An experiment template includes the following components:
            </para><ul><li><para><b>Targets</b>: A target can be a specific resource in your Amazon Web Services environment,
            or one or more resources that match criteria that you specify, for example, resources
            that have specific tags.
            </para></li><li><para><b>Actions</b>: The actions to carry out on the target. You can specify multiple
            actions, the duration of each action, and when to start each action during an experiment.
            </para></li><li><para><b>Stop conditions</b>: If a stop condition is triggered while an experiment is running,
            the experiment is automatically stopped. You can define a stop condition as a CloudWatch
            alarm.
            </para></li></ul><para>
            For more information, see <a href="https://docs.aws.amazon.com/fis/latest/userguide/experiment-templates.html">experiment
            templates</a> in the <i>Fault Injection Service User Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.ExperimentOptions_AccountTargeting">
            <summary>
            <para>
            <para>Specifies the account targeting setting for experiment options.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.Action">
            <summary>
            <para>
            <para>The actions for the experiment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.S3Configuration_BucketName">
            <summary>
            <para>
            <para>The name of the destination bucket.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.Description">
            <summary>
            <para>
            <para>A description for the experiment template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.ExperimentOptions_EmptyTargetResolutionMode">
            <summary>
            <para>
            <para>Specifies the empty target resolution mode for experiment options.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.CloudWatchLogsConfiguration_LogGroupArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the destination Amazon CloudWatch Logs log group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.LogConfiguration_LogSchemaVersion">
            <summary>
            <para>
            <para>The schema version.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.S3Configuration_Prefix">
            <summary>
            <para>
            <para>The bucket prefix.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.RoleArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of an IAM role that grants the FIS service permission
            to perform service actions on your behalf.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.StopCondition">
            <summary>
            <para>
            <para>The stop conditions.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.Tag">
            <summary>
            <para>
            <para>The tags to apply to the experiment template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.Target">
            <summary>
            <para>
            <para>The targets for the experiment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.ClientToken">
            <summary>
            <para>
            <para>Unique, case-sensitive identifier that you provide to ensure the idempotency of the
            request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ExperimentTemplate'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.CreateExperimentTemplateResponse).
            Specifying the name of a property of type Amazon.FIS.Model.CreateExperimentTemplateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISExperimentTemplateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.NewFISTargetAccountConfigurationCmdlet">
            <summary>
            Creates a target account configuration for the experiment template. A target account
            configuration is required when <c>accountTargeting</c> of <c>experimentOptions</c>
            is set to <c>multi-account</c>. For more information, see <a href="https://docs.aws.amazon.com/fis/latest/userguide/experiment-options.html">experiment
            options</a> in the <i>Fault Injection Service User Guide</i>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISTargetAccountConfigurationCmdlet.AccountId">
            <summary>
            <para>
            <para>The Amazon Web Services account ID of the target account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISTargetAccountConfigurationCmdlet.Description">
            <summary>
            <para>
            <para>The description of the target account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISTargetAccountConfigurationCmdlet.ExperimentTemplateId">
            <summary>
            <para>
            <para>The experiment template ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISTargetAccountConfigurationCmdlet.RoleArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of an IAM role for the target account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISTargetAccountConfigurationCmdlet.ClientToken">
            <summary>
            <para>
            <para>Unique, case-sensitive identifier that you provide to ensure the idempotency of the
            request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISTargetAccountConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TargetAccountConfiguration'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.CreateTargetAccountConfigurationResponse).
            Specifying the name of a property of type Amazon.FIS.Model.CreateTargetAccountConfigurationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISTargetAccountConfigurationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ExperimentTemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^ExperimentTemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.NewFISTargetAccountConfigurationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.RemoveFISExperimentTemplateCmdlet">
            <summary>
            Deletes the specified experiment template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISExperimentTemplateCmdlet.Id">
            <summary>
            <para>
            <para>The ID of the experiment template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISExperimentTemplateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ExperimentTemplate'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.DeleteExperimentTemplateResponse).
            Specifying the name of a property of type Amazon.FIS.Model.DeleteExperimentTemplateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISExperimentTemplateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Id parameter.
            The -PassThru parameter is deprecated, use -Select '^Id' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISExperimentTemplateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.RemoveFISResourceTagCmdlet">
            <summary>
            Removes the specified tags from the specified resource.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISResourceTagCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISResourceTagCmdlet.TagKey">
            <summary>
            <para>
            <para>The tag keys to remove.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.UntagResourceResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceArn parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.RemoveFISTargetAccountConfigurationCmdlet">
            <summary>
            Deletes the specified target account configuration of the experiment template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISTargetAccountConfigurationCmdlet.AccountId">
            <summary>
            <para>
            <para>The Amazon Web Services account ID of the target account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISTargetAccountConfigurationCmdlet.ExperimentTemplateId">
            <summary>
            <para>
            <para>The ID of the experiment template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISTargetAccountConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TargetAccountConfiguration'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.DeleteTargetAccountConfigurationResponse).
            Specifying the name of a property of type Amazon.FIS.Model.DeleteTargetAccountConfigurationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISTargetAccountConfigurationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ExperimentTemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^ExperimentTemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.RemoveFISTargetAccountConfigurationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.StartFISExperimentCmdlet">
            <summary>
            Starts running an experiment from the specified experiment template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.StartFISExperimentCmdlet.ExperimentOptions_ActionsMode">
            <summary>
            <para>
            <para>Specifies the actions mode for experiment options.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.StartFISExperimentCmdlet.ExperimentTemplateId">
            <summary>
            <para>
            <para>The ID of the experiment template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.StartFISExperimentCmdlet.Tag">
            <summary>
            <para>
            <para>The tags to apply to the experiment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.StartFISExperimentCmdlet.ClientToken">
            <summary>
            <para>
            <para>Unique, case-sensitive identifier that you provide to ensure the idempotency of the
            request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.StartFISExperimentCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Experiment'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.StartExperimentResponse).
            Specifying the name of a property of type Amazon.FIS.Model.StartExperimentResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.StartFISExperimentCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ExperimentTemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^ExperimentTemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.StartFISExperimentCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.StopFISExperimentCmdlet">
            <summary>
            Stops the specified experiment.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.StopFISExperimentCmdlet.Id">
            <summary>
            <para>
            <para>The ID of the experiment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.StopFISExperimentCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Experiment'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.StopExperimentResponse).
            Specifying the name of a property of type Amazon.FIS.Model.StopExperimentResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.StopFISExperimentCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Id parameter.
            The -PassThru parameter is deprecated, use -Select '^Id' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.StopFISExperimentCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet">
            <summary>
            Updates the specified experiment template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.Action">
            <summary>
            <para>
            <para>The actions for the experiment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.S3Configuration_BucketName">
            <summary>
            <para>
            <para>The name of the destination bucket.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.Description">
            <summary>
            <para>
            <para>A description for the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.ExperimentOptions_EmptyTargetResolutionMode">
            <summary>
            <para>
            <para>The empty target resolution mode of the experiment template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.Id">
            <summary>
            <para>
            <para>The ID of the experiment template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.CloudWatchLogsConfiguration_LogGroupArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the destination Amazon CloudWatch Logs log group.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.LogConfiguration_LogSchemaVersion">
            <summary>
            <para>
            <para>The schema version.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.S3Configuration_Prefix">
            <summary>
            <para>
            <para>The bucket prefix.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.RoleArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of an IAM role that grants the FIS service permission
            to perform service actions on your behalf.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.StopCondition">
            <summary>
            <para>
            <para>The stop conditions for the experiment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.Target">
            <summary>
            <para>
            <para>The targets for the experiment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ExperimentTemplate'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.UpdateExperimentTemplateResponse).
            Specifying the name of a property of type Amazon.FIS.Model.UpdateExperimentTemplateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Id parameter.
            The -PassThru parameter is deprecated, use -Select '^Id' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISExperimentTemplateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.FIS.UpdateFISTargetAccountConfigurationCmdlet">
            <summary>
            Updates the target account configuration for the specified experiment template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISTargetAccountConfigurationCmdlet.AccountId">
            <summary>
            <para>
            <para>The Amazon Web Services account ID of the target account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISTargetAccountConfigurationCmdlet.Description">
            <summary>
            <para>
            <para>The description of the target account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISTargetAccountConfigurationCmdlet.ExperimentTemplateId">
            <summary>
            <para>
            <para>The ID of the experiment template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISTargetAccountConfigurationCmdlet.RoleArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of an IAM role for the target account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISTargetAccountConfigurationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TargetAccountConfiguration'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.FIS.Model.UpdateTargetAccountConfigurationResponse).
            Specifying the name of a property of type Amazon.FIS.Model.UpdateTargetAccountConfigurationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISTargetAccountConfigurationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ExperimentTemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^ExperimentTemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.FIS.UpdateFISTargetAccountConfigurationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
    </members>
</doc>