AWS.Tools.ForecastService.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.ForecastService</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.FRC.GetFRCAccuracyMetricCmdlet"> <summary> Provides metrics on the accuracy of the models that were trained by the <a>CreatePredictor</a> operation. Use metrics to see how well the model performed and to decide whether to use the predictor to generate a forecast. For more information, see <a>metrics</a>. <para> This operation generates metrics for each backtest window that was evaluated. The number of backtest windows (<code>NumberOfBacktestWindows</code>) is specified using the <a>EvaluationParameters</a> object, which is optionally included in the <code>CreatePredictor</code> request. If <code>NumberOfBacktestWindows</code> isn't specified, the number defaults to one. </para><para> The parameters of the <code>filling</code> method determine which items contribute to the metrics. If you want all items to contribute, specify <code>zero</code>. If you want only those items that have complete data in the range being evaluated to contribute, specify <code>nan</code>. For more information, see <a>FeaturizationMethod</a>. </para><note><para> Before you can get accuracy metrics, the <code>Status</code> of the predictor must be <code>ACTIVE</code>, signifying that training has completed. To get the status, use the <a>DescribePredictor</a> operation. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCAccuracyMetricCmdlet.PredictorArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the predictor to get metrics for.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCAccuracyMetricCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'PredictorEvaluationResults'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.GetAccuracyMetricsResponse). Specifying the name of a property of type Amazon.ForecastService.Model.GetAccuracyMetricsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCAccuracyMetricCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the PredictorArn parameter. The -PassThru parameter is deprecated, use -Select '^PredictorArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetCmdlet"> <summary> Describes an Amazon Forecast dataset created using the <a>CreateDataset</a> operation. <para> In addition to listing the parameters specified in the <code>CreateDataset</code> request, this operation includes the following dataset properties: </para><ul><li><para><code>CreationTime</code></para></li><li><para><code>LastModificationTime</code></para></li><li><para><code>Status</code></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetCmdlet.DatasetArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the dataset.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.DescribeDatasetResponse). Specifying the name of a property of type Amazon.ForecastService.Model.DescribeDatasetResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DatasetArn parameter. The -PassThru parameter is deprecated, use -Select '^DatasetArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetGroupCmdlet"> <summary> Describes a dataset group created using the <a>CreateDatasetGroup</a> operation. <para> In addition to listing the parameters provided in the <code>CreateDatasetGroup</code> request, this operation includes the following properties: </para><ul><li><para><code>DatasetArns</code> - The datasets belonging to the group. </para></li><li><para><code>CreationTime</code></para></li><li><para><code>LastModificationTime</code></para></li><li><para><code>Status</code></para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetGroupCmdlet.DatasetGroupArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the dataset group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.DescribeDatasetGroupResponse). Specifying the name of a property of type Amazon.ForecastService.Model.DescribeDatasetGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DatasetGroupArn parameter. The -PassThru parameter is deprecated, use -Select '^DatasetGroupArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetGroupListCmdlet"> <summary> Returns a list of dataset groups created using the <a>CreateDatasetGroup</a> operation. For each dataset group, this operation returns a summary of its properties, including its Amazon Resource Name (ARN). You can retrieve the complete set of properties by using the dataset group ARN with the <a>DescribeDatasetGroup</a> operation.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetGroupListCmdlet.MaxResult"> <summary> <para> <para>The number of items to return in the response.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetGroupListCmdlet.NextToken"> <summary> <para> <para>If the result of the previous request was truncated, the response includes a <code>NextToken</code>. To retrieve the next set of results, use the token in the next request. Tokens expire after 24 hours.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetGroupListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'DatasetGroups'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.ListDatasetGroupsResponse). Specifying the name of a property of type Amazon.ForecastService.Model.ListDatasetGroupsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetGroupListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetImportJobCmdlet"> <summary> Describes a dataset import job created using the <a>CreateDatasetImportJob</a> operation. <para> In addition to listing the parameters provided in the <code>CreateDatasetImportJob</code> request, this operation includes the following properties: </para><ul><li><para><code>CreationTime</code></para></li><li><para><code>LastModificationTime</code></para></li><li><para><code>DataSize</code></para></li><li><para><code>FieldStatistics</code></para></li><li><para><code>Status</code></para></li><li><para><code>Message</code> - If an error occurred, information about the error. </para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetImportJobCmdlet.DatasetImportJobArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the dataset import job.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetImportJobCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.DescribeDatasetImportJobResponse). Specifying the name of a property of type Amazon.ForecastService.Model.DescribeDatasetImportJobResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetImportJobCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DatasetImportJobArn parameter. The -PassThru parameter is deprecated, use -Select '^DatasetImportJobArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetImportJobListCmdlet"> <summary> Returns a list of dataset import jobs created using the <a>CreateDatasetImportJob</a> operation. For each import job, this operation returns a summary of its properties, including its Amazon Resource Name (ARN). You can retrieve the complete set of properties by using the ARN with the <a>DescribeDatasetImportJob</a> operation. You can filter the list by providing an array of <a>Filter</a> objects.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetImportJobListCmdlet.Filter"> <summary> <para> <para>An array of filters. For each filter, you provide a condition and a match statement. The condition is either <code>IS</code> or <code>IS_NOT</code>, which specifies whether to include or exclude the datasets that match the statement from the list, respectively. The match statement consists of a key and a value.</para><para><b>Filter properties</b></para><ul><li><para><code>Condition</code> - The condition to apply. Valid values are <code>IS</code> and <code>IS_NOT</code>. To include the datasets that match the statement, specify <code>IS</code>. To exclude matching datasets, specify <code>IS_NOT</code>.</para></li><li><para><code>Key</code> - The name of the parameter to filter on. Valid values are <code>DatasetArn</code> and <code>Status</code>.</para></li><li><para><code>Value</code> - The value to match.</para></li></ul><para>For example, to list all dataset import jobs whose status is ACTIVE, you specify the following filter:</para><para><code>"Filters": [ { "Condition": "IS", "Key": "Status", "Value": "ACTIVE" } ]</code></para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetImportJobListCmdlet.MaxResult"> <summary> <para> <para>The number of items to return in the response.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetImportJobListCmdlet.NextToken"> <summary> <para> <para>If the result of the previous request was truncated, the response includes a <code>NextToken</code>. To retrieve the next set of results, use the token in the next request. Tokens expire after 24 hours.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetImportJobListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'DatasetImportJobs'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.ListDatasetImportJobsResponse). Specifying the name of a property of type Amazon.ForecastService.Model.ListDatasetImportJobsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetImportJobListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetListCmdlet"> <summary> Returns a list of datasets created using the <a>CreateDataset</a> operation. For each dataset, a summary of its properties, including its Amazon Resource Name (ARN), is returned. To retrieve the complete set of properties, use the ARN with the <a>DescribeDataset</a> operation.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetListCmdlet.MaxResult"> <summary> <para> <para>The number of items to return in the response.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetListCmdlet.NextToken"> <summary> <para> <para>If the result of the previous request was truncated, the response includes a <code>NextToken</code>. To retrieve the next set of results, use the token in the next request. Tokens expire after 24 hours.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Datasets'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.ListDatasetsResponse). Specifying the name of a property of type Amazon.ForecastService.Model.ListDatasetsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCDatasetListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastCmdlet"> <summary> Describes a forecast created using the <a>CreateForecast</a> operation. <para> In addition to listing the properties provided in the <code>CreateForecast</code> request, this operation lists the following properties: </para><ul><li><para><code>DatasetGroupArn</code> - The dataset group that provided the training data. </para></li><li><para><code>CreationTime</code></para></li><li><para><code>LastModificationTime</code></para></li><li><para><code>Status</code></para></li><li><para><code>Message</code> - If an error occurred, information about the error. </para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastCmdlet.ForecastArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the forecast.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.DescribeForecastResponse). Specifying the name of a property of type Amazon.ForecastService.Model.DescribeForecastResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ForecastArn parameter. The -PassThru parameter is deprecated, use -Select '^ForecastArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastExportJobCmdlet"> <summary> Describes a forecast export job created using the <a>CreateForecastExportJob</a> operation. <para> In addition to listing the properties provided by the user in the <code>CreateForecastExportJob</code> request, this operation lists the following properties: </para><ul><li><para><code>CreationTime</code></para></li><li><para><code>LastModificationTime</code></para></li><li><para><code>Status</code></para></li><li><para><code>Message</code> - If an error occurred, information about the error. </para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastExportJobCmdlet.ForecastExportJobArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the forecast export job.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastExportJobCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.DescribeForecastExportJobResponse). Specifying the name of a property of type Amazon.ForecastService.Model.DescribeForecastExportJobResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastExportJobCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ForecastExportJobArn parameter. The -PassThru parameter is deprecated, use -Select '^ForecastExportJobArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastExportJobListCmdlet"> <summary> Returns a list of forecast export jobs created using the <a>CreateForecastExportJob</a> operation. For each forecast export job, this operation returns a summary of its properties, including its Amazon Resource Name (ARN). To retrieve the complete set of properties, use the ARN with the <a>DescribeForecastExportJob</a> operation. You can filter the list using an array of <a>Filter</a> objects.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastExportJobListCmdlet.Filter"> <summary> <para> <para>An array of filters. For each filter, you provide a condition and a match statement. The condition is either <code>IS</code> or <code>IS_NOT</code>, which specifies whether to include or exclude the forecast export jobs that match the statement from the list, respectively. The match statement consists of a key and a value.</para><para><b>Filter properties</b></para><ul><li><para><code>Condition</code> - The condition to apply. Valid values are <code>IS</code> and <code>IS_NOT</code>. To include the forecast export jobs that match the statement, specify <code>IS</code>. To exclude matching forecast export jobs, specify <code>IS_NOT</code>.</para></li><li><para><code>Key</code> - The name of the parameter to filter on. Valid values are <code>ForecastArn</code> and <code>Status</code>.</para></li><li><para><code>Value</code> - The value to match.</para></li></ul><para>For example, to list all jobs that export a forecast named <i>electricityforecast</i>, specify the following filter:</para><para><code>"Filters": [ { "Condition": "IS", "Key": "ForecastArn", "Value": "arn:aws:forecast:us-west-2:<acct-id>:forecast/electricityforecast" } ]</code></para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastExportJobListCmdlet.MaxResult"> <summary> <para> <para>The number of items to return in the response.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastExportJobListCmdlet.NextToken"> <summary> <para> <para>If the result of the previous request was truncated, the response includes a <code>NextToken</code>. To retrieve the next set of results, use the token in the next request. Tokens expire after 24 hours.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastExportJobListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ForecastExportJobs'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.ListForecastExportJobsResponse). Specifying the name of a property of type Amazon.ForecastService.Model.ListForecastExportJobsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastExportJobListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastListCmdlet"> <summary> Returns a list of forecasts created using the <a>CreateForecast</a> operation. For each forecast, this operation returns a summary of its properties, including its Amazon Resource Name (ARN). To retrieve the complete set of properties, specify the ARN with the <a>DescribeForecast</a> operation. You can filter the list using an array of <a>Filter</a> objects.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastListCmdlet.Filter"> <summary> <para> <para>An array of filters. For each filter, you provide a condition and a match statement. The condition is either <code>IS</code> or <code>IS_NOT</code>, which specifies whether to include or exclude the forecasts that match the statement from the list, respectively. The match statement consists of a key and a value.</para><para><b>Filter properties</b></para><ul><li><para><code>Condition</code> - The condition to apply. Valid values are <code>IS</code> and <code>IS_NOT</code>. To include the forecasts that match the statement, specify <code>IS</code>. To exclude matching forecasts, specify <code>IS_NOT</code>.</para></li><li><para><code>Key</code> - The name of the parameter to filter on. Valid values are <code>DatasetGroupArn</code>, <code>PredictorArn</code>, and <code>Status</code>.</para></li><li><para><code>Value</code> - The value to match.</para></li></ul><para>For example, to list all forecasts whose status is not ACTIVE, you would specify:</para><para><code>"Filters": [ { "Condition": "IS_NOT", "Key": "Status", "Value": "ACTIVE" } ]</code></para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastListCmdlet.MaxResult"> <summary> <para> <para>The number of items to return in the response.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastListCmdlet.NextToken"> <summary> <para> <para>If the result of the previous request was truncated, the response includes a <code>NextToken</code>. To retrieve the next set of results, use the token in the next request. Tokens expire after 24 hours.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Forecasts'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.ListForecastsResponse). Specifying the name of a property of type Amazon.ForecastService.Model.ListForecastsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCForecastListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.GetFRCPredictorCmdlet"> <summary> Describes a predictor created using the <a>CreatePredictor</a> operation. <para> In addition to listing the properties provided in the <code>CreatePredictor</code> request, this operation lists the following properties: </para><ul><li><para><code>DatasetImportJobArns</code> - The dataset import jobs used to import training data. </para></li><li><para><code>AutoMLAlgorithmArns</code> - If AutoML is performed, the algorithms that were evaluated. </para></li><li><para><code>CreationTime</code></para></li><li><para><code>LastModificationTime</code></para></li><li><para><code>Status</code></para></li><li><para><code>Message</code> - If an error occurred, information about the error. </para></li></ul> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCPredictorCmdlet.PredictorArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the predictor that you want information about.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCPredictorCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.DescribePredictorResponse). Specifying the name of a property of type Amazon.ForecastService.Model.DescribePredictorResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCPredictorCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the PredictorArn parameter. The -PassThru parameter is deprecated, use -Select '^PredictorArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.GetFRCPredictorListCmdlet"> <summary> Returns a list of predictors created using the <a>CreatePredictor</a> operation. For each predictor, this operation returns a summary of its properties, including its Amazon Resource Name (ARN). You can retrieve the complete set of properties by using the ARN with the <a>DescribePredictor</a> operation. You can filter the list using an array of <a>Filter</a> objects.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCPredictorListCmdlet.Filter"> <summary> <para> <para>An array of filters. For each filter, you provide a condition and a match statement. The condition is either <code>IS</code> or <code>IS_NOT</code>, which specifies whether to include or exclude the predictors that match the statement from the list, respectively. The match statement consists of a key and a value.</para><para><b>Filter properties</b></para><ul><li><para><code>Condition</code> - The condition to apply. Valid values are <code>IS</code> and <code>IS_NOT</code>. To include the predictors that match the statement, specify <code>IS</code>. To exclude matching predictors, specify <code>IS_NOT</code>.</para></li><li><para><code>Key</code> - The name of the parameter to filter on. Valid values are <code>DatasetGroupArn</code> and <code>Status</code>.</para></li><li><para><code>Value</code> - The value to match.</para></li></ul><para>For example, to list all predictors whose status is ACTIVE, you would specify:</para><para><code>"Filters": [ { "Condition": "IS", "Key": "Status", "Value": "ACTIVE" } ]</code></para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCPredictorListCmdlet.MaxResult"> <summary> <para> <para>The number of items to return in the response.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCPredictorListCmdlet.NextToken"> <summary> <para> <para>If the result of the previous request was truncated, the response includes a <code>NextToken</code>. To retrieve the next set of results, use the token in the next request. Tokens expire after 24 hours.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCPredictorListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Predictors'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.ListPredictorsResponse). Specifying the name of a property of type Amazon.ForecastService.Model.ListPredictorsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.GetFRCPredictorListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetCmdlet"> <summary> Creates an Amazon Forecast dataset. The information about the dataset that you provide helps Forecast understand how to consume the data for model training. This includes the following: <ul><li><para><i><code>DataFrequency</code></i> - How frequently your historical time-series data is collected. </para></li><li><para><i><code>Domain</code></i> and <i><code>DatasetType</code></i> - Each dataset has an associated dataset domain and a type within the domain. Amazon Forecast provides a list of predefined domains and types within each domain. For each unique dataset domain and type within the domain, Amazon Forecast requires your data to include a minimum set of predefined fields. </para></li><li><para><i><code>Schema</code></i> - A schema specifies the fields in the dataset, including the field name and data type. </para></li></ul><para> After creating a dataset, you import your training data into it and add the dataset to a dataset group. You use the dataset group to create a predictor. For more information, see <a>howitworks-datasets-groups</a>. </para><para> To get a list of all your datasets, use the <a>ListDatasets</a> operation. </para><para> For example Forecast datasets, see the <a href="https://github.com/aws-samples/amazon-forecast-samples/tree/master/data">Amazon Forecast Sample GitHub repository</a>. </para><note><para> The <code>Status</code> of a dataset must be <code>ACTIVE</code> before you can import training data. Use the <a>DescribeDataset</a> operation to get the status. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetCmdlet.Schema_Attribute"> <summary> <para> <para>An array of attributes specifying the name and type of each field in a dataset.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetCmdlet.DataFrequency"> <summary> <para> <para>The frequency of data collection. This parameter is required for RELATED_TIME_SERIES datasets.</para><para>Valid intervals are Y (Year), M (Month), W (Week), D (Day), H (Hour), 30min (30 minutes), 15min (15 minutes), 10min (10 minutes), 5min (5 minutes), and 1min (1 minute). For example, "D" indicates every day and "15min" indicates every 15 minutes.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetCmdlet.DatasetName"> <summary> <para> <para>A name for the dataset.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetCmdlet.DatasetType"> <summary> <para> <para>The dataset type. Valid values depend on the chosen <code>Domain</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetCmdlet.Domain"> <summary> <para> <para>The domain associated with the dataset. When you add a dataset to a dataset group, this value and the value specified for the <code>Domain</code> parameter of the <a>CreateDatasetGroup</a> operation must match.</para><para>The <code>Domain</code> and <code>DatasetType</code> that you choose determine the fields that must be present in the training data that you import to the dataset. For example, if you choose the <code>RETAIL</code> domain and <code>TARGET_TIME_SERIES</code> as the <code>DatasetType</code>, Amazon Forecast requires <code>item_id</code>, <code>timestamp</code>, and <code>demand</code> fields to be present in your data. For more information, see <a>howitworks-datasets-groups</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetCmdlet.EncryptionConfig_KMSKeyArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the KMS key.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetCmdlet.EncryptionConfig_RoleArn"> <summary> <para> <para>The ARN of the IAM role that Amazon Forecast can assume to access the AWS KMS key.</para><para>Passing a role across AWS accounts is not allowed. If you pass a role that isn't in your account, you get an <code>InvalidInputException</code> error.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'DatasetArn'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.CreateDatasetResponse). Specifying the name of a property of type Amazon.ForecastService.Model.CreateDatasetResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DatasetName parameter. The -PassThru parameter is deprecated, use -Select '^DatasetName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetGroupCmdlet"> <summary> Creates a dataset group, which holds a collection of related datasets. You can add datasets to the dataset group when you create the dataset group, or later by using the <a>UpdateDatasetGroup</a> operation. <para> After creating a dataset group and adding datasets, you use the dataset group when you create a predictor. For more information, see <a>howitworks-datasets-groups</a>. </para><para> To get a list of all your datasets groups, use the <a>ListDatasetGroups</a> operation. </para><note><para> The <code>Status</code> of a dataset group must be <code>ACTIVE</code> before you can create use the dataset group to create a predictor. To get the status, use the <a>DescribeDatasetGroup</a> operation. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetGroupCmdlet.DatasetArn"> <summary> <para> <para>An array of Amazon Resource Names (ARNs) of the datasets that you want to include in the dataset group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetGroupCmdlet.DatasetGroupName"> <summary> <para> <para>A name for the dataset group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetGroupCmdlet.Domain"> <summary> <para> <para>The domain associated with the dataset group. When you add a dataset to a dataset group, this value and the value specified for the <code>Domain</code> parameter of the <a>CreateDataset</a> operation must match.</para><para>The <code>Domain</code> and <code>DatasetType</code> that you choose determine the fields that must be present in training data that you import to a dataset. For example, if you choose the <code>RETAIL</code> domain and <code>TARGET_TIME_SERIES</code> as the <code>DatasetType</code>, Amazon Forecast requires that <code>item_id</code>, <code>timestamp</code>, and <code>demand</code> fields are present in your data. For more information, see <a>howitworks-datasets-groups</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'DatasetGroupArn'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.CreateDatasetGroupResponse). Specifying the name of a property of type Amazon.ForecastService.Model.CreateDatasetGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DatasetGroupName parameter. The -PassThru parameter is deprecated, use -Select '^DatasetGroupName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetImportJobCmdlet"> <summary> Imports your training data to an Amazon Forecast dataset. You provide the location of your training data in an Amazon Simple Storage Service (Amazon S3) bucket and the Amazon Resource Name (ARN) of the dataset that you want to import the data to. <para> You must specify a <a>DataSource</a> object that includes an AWS Identity and Access Management (IAM) role that Amazon Forecast can assume to access the data. For more information, see <a>aws-forecast-iam-roles</a>. </para><para> The training data must be in CSV format. The delimiter must be a comma (,). </para><para> You can specify the path to a specific CSV file, the S3 bucket, or to a folder in the S3 bucket. For the latter two cases, Amazon Forecast imports all files up to the limit of 10,000 files. </para><para> To get a list of all your dataset import jobs, filtered by specified criteria, use the <a>ListDatasetImportJobs</a> operation. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetImportJobCmdlet.DatasetArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the Amazon Forecast dataset that you want to import data to.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetImportJobCmdlet.DatasetImportJobName"> <summary> <para> <para>The name for the dataset import job. We recommend including the current timestamp in the name, for example, <code>20190721DatasetImport</code>. This can help you avoid getting a <code>ResourceAlreadyExistsException</code> exception.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetImportJobCmdlet.S3Config_KMSKeyArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of an AWS Key Management Service (KMS) key.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetImportJobCmdlet.S3Config_Path"> <summary> <para> <para>The path to an Amazon Simple Storage Service (Amazon S3) bucket or file(s) in an Amazon S3 bucket.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetImportJobCmdlet.S3Config_RoleArn"> <summary> <para> <para>The ARN of the AWS Identity and Access Management (IAM) role that Amazon Forecast can assume to access the Amazon S3 bucket or files. If you provide a value for the <code>KMSKeyArn</code> key, the role must allow access to the key.</para><para>Passing a role across AWS accounts is not allowed. If you pass a role that isn't in your account, you get an <code>InvalidInputException</code> error.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetImportJobCmdlet.TimestampFormat"> <summary> <para> <para>The format of timestamps in the dataset. The format that you specify depends on the <code>DataFrequency</code> specified when the dataset was created. The following formats are supported</para><ul><li><para>"yyyy-MM-dd"</para><para>For the following data frequencies: Y, M, W, and D</para></li><li><para>"yyyy-MM-dd HH:mm:ss"</para><para>For the following data frequencies: H, 30min, 15min, and 1min; and optionally, for: Y, M, W, and D</para></li></ul><para>If the format isn't specified, Amazon Forecast expects the format to be "yyyy-MM-dd HH:mm:ss".</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetImportJobCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'DatasetImportJobArn'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.CreateDatasetImportJobResponse). Specifying the name of a property of type Amazon.ForecastService.Model.CreateDatasetImportJobResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetImportJobCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DatasetArn parameter. The -PassThru parameter is deprecated, use -Select '^DatasetArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCDatasetImportJobCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastCmdlet"> <summary> Creates a forecast for each item in the <code>TARGET_TIME_SERIES</code> dataset that was used to train the predictor. This is known as inference. To retrieve the forecast for a single item at low latency, use the operation. To export the complete forecast into your Amazon Simple Storage Service (Amazon S3) bucket, use the <a>CreateForecastExportJob</a> operation. <para> The range of the forecast is determined by the <code>ForecastHorizon</code> value, which you specify in the <a>CreatePredictor</a> request, multiplied by the <code>DataFrequency</code> value, which you specify in the <a>CreateDataset</a> request. When you query a forecast, you can request a specific date range within the forecast. </para><para> To get a list of all your forecasts, use the <a>ListForecasts</a> operation. </para><note><para> The forecasts generated by Amazon Forecast are in the same time zone as the dataset that was used to create the predictor. </para></note><para> For more information, see <a>howitworks-forecast</a>. </para><note><para> The <code>Status</code> of the forecast must be <code>ACTIVE</code> before you can query or export the forecast. Use the <a>DescribeForecast</a> operation to get the status. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastCmdlet.ForecastName"> <summary> <para> <para>A name for the forecast.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastCmdlet.ForecastType"> <summary> <para> <para>The quantiles at which probabilistic forecasts are generated. You can specify up to 5 quantiles per forecast. Accepted values include <code>0.01 to 0.99</code> (increments of .01 only) and <code>mean</code>. The mean forecast is different from the median (0.50) when the distribution is not symmetric (e.g. Beta, Negative Binomial). The default value is <code>["0.1", "0.5", "0.9"]</code>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastCmdlet.PredictorArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the predictor to use to generate the forecast.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ForecastArn'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.CreateForecastResponse). Specifying the name of a property of type Amazon.ForecastService.Model.CreateForecastResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the PredictorArn parameter. The -PassThru parameter is deprecated, use -Select '^PredictorArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastExportJobCmdlet"> <summary> Exports a forecast created by the <a>CreateForecast</a> operation to your Amazon Simple Storage Service (Amazon S3) bucket. The forecast file name will match the following conventions: <para> <ForecastExportJobName>_<ExportTimestamp>_<PageNumber> </para><para> where the <ExportTimestamp> component is in Java SimpleDateFormat (yyyy-MM-ddTHH-mm-ssZ). </para><para> You must specify a <a>DataDestination</a> object that includes an AWS Identity and Access Management (IAM) role that Amazon Forecast can assume to access the Amazon S3 bucket. For more information, see <a>aws-forecast-iam-roles</a>. </para><para> For more information, see <a>howitworks-forecast</a>. </para><para> To get a list of all your forecast export jobs, use the <a>ListForecastExportJobs</a> operation. </para><note><para> The <code>Status</code> of the forecast export job must be <code>ACTIVE</code> before you can access the forecast in your Amazon S3 bucket. To get the status, use the <a>DescribeForecastExportJob</a> operation. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastExportJobCmdlet.ForecastArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the forecast that you want to export.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastExportJobCmdlet.ForecastExportJobName"> <summary> <para> <para>The name for the forecast export job.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastExportJobCmdlet.S3Config_KMSKeyArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of an AWS Key Management Service (KMS) key.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastExportJobCmdlet.S3Config_Path"> <summary> <para> <para>The path to an Amazon Simple Storage Service (Amazon S3) bucket or file(s) in an Amazon S3 bucket.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastExportJobCmdlet.S3Config_RoleArn"> <summary> <para> <para>The ARN of the AWS Identity and Access Management (IAM) role that Amazon Forecast can assume to access the Amazon S3 bucket or files. If you provide a value for the <code>KMSKeyArn</code> key, the role must allow access to the key.</para><para>Passing a role across AWS accounts is not allowed. If you pass a role that isn't in your account, you get an <code>InvalidInputException</code> error.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastExportJobCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ForecastExportJobArn'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.CreateForecastExportJobResponse). Specifying the name of a property of type Amazon.ForecastService.Model.CreateForecastExportJobResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastExportJobCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ForecastArn parameter. The -PassThru parameter is deprecated, use -Select '^ForecastArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCForecastExportJobCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet"> <summary> Creates an Amazon Forecast predictor. <para> In the request, you provide a dataset group and either specify an algorithm or let Amazon Forecast choose the algorithm for you using AutoML. If you specify an algorithm, you also can override algorithm-specific hyperparameters. </para><para> Amazon Forecast uses the chosen algorithm to train a model using the latest version of the datasets in the specified dataset group. The result is called a predictor. You then generate a forecast using the <a>CreateForecast</a> operation. </para><para> After training a model, the <code>CreatePredictor</code> operation also evaluates it. To see the evaluation metrics, use the <a>GetAccuracyMetrics</a> operation. Always review the evaluation metrics before deciding to use the predictor to generate a forecast. </para><para> Optionally, you can specify a featurization configuration to fill and aggregate the data fields in the <code>TARGET_TIME_SERIES</code> dataset to improve model training. For more information, see <a>FeaturizationConfig</a>. </para><para> For RELATED_TIME_SERIES datasets, <code>CreatePredictor</code> verifies that the <code>DataFrequency</code> specified when the dataset was created matches the <code>ForecastFrequency</code>. TARGET_TIME_SERIES datasets don't have this restriction. Amazon Forecast also verifies the delimiter and timestamp format. For more information, see <a>howitworks-datasets-groups</a>. </para><para><b>AutoML</b></para><para> If you want Amazon Forecast to evaluate each algorithm and choose the one that minimizes the <code>objective function</code>, set <code>PerformAutoML</code> to <code>true</code>. The <code>objective function</code> is defined as the mean of the weighted p10, p50, and p90 quantile losses. For more information, see <a>EvaluationResult</a>. </para><para> When AutoML is enabled, the following properties are disallowed: </para><ul><li><para><code>AlgorithmArn</code></para></li><li><para><code>HPOConfig</code></para></li><li><para><code>PerformHPO</code></para></li><li><para><code>TrainingParameters</code></para></li></ul><para> To get a list of all of your predictors, use the <a>ListPredictors</a> operation. </para><note><para> Before you can use the predictor to create a forecast, the <code>Status</code> of the predictor must be <code>ACTIVE</code>, signifying that training has completed. To get the status, use the <a>DescribePredictor</a> operation. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.AlgorithmArn"> <summary> <para> Amazon.ForecastService.Model.CreatePredictorRequest.AlgorithmArn </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.EvaluationParameters_BackTestWindowOffset"> <summary> <para> <para>The point from the end of the dataset where you want to split the data for model training and testing (evaluation). Specify the value as the number of data points. The default is the value of the forecast horizon. <code>BackTestWindowOffset</code> can be used to mimic a past virtual forecast start date. This value must be greater than or equal to the forecast horizon and less than half of the TARGET_TIME_SERIES dataset length.</para><para><code>ForecastHorizon</code> <= <code>BackTestWindowOffset</code> < 1/2 * TARGET_TIME_SERIES dataset length</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.ParameterRanges_CategoricalParameterRange"> <summary> <para> <para>Specifies the tunable range for each categorical hyperparameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.ParameterRanges_ContinuousParameterRange"> <summary> <para> <para>Specifies the tunable range for each continuous hyperparameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.InputDataConfig_DatasetGroupArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the dataset group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.FeaturizationConfig_Featurization"> <summary> <para> <para>An array of featurization (transformation) information for the fields of a dataset. Only a single featurization is supported.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.FeaturizationConfig_ForecastDimension"> <summary> <para> <para>An array of dimension (field) names that specify how to group the generated forecast.</para><para>For example, suppose that you are generating a forecast for item sales across all of your stores, and your dataset contains a <code>store_id</code> field. If you want the sales forecast for each item by store, you would specify <code>store_id</code> as the dimension.</para><para>All forecast dimensions specified in the <code>TARGET_TIME_SERIES</code> dataset don't need to be specified in the <code>CreatePredictor</code> request. All forecast dimensions specified in the <code>RELATED_TIME_SERIES</code> dataset must be specified in the <code>CreatePredictor</code> request.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.FeaturizationConfig_ForecastFrequency"> <summary> <para> <para>The frequency of predictions in a forecast.</para><para>Valid intervals are Y (Year), M (Month), W (Week), D (Day), H (Hour), 30min (30 minutes), 15min (15 minutes), 10min (10 minutes), 5min (5 minutes), and 1min (1 minute). For example, "Y" indicates every year and "5min" indicates every five minutes.</para><para>The frequency must be greater than or equal to the TARGET_TIME_SERIES dataset frequency.</para><para>When a RELATED_TIME_SERIES dataset is provided, the frequency must be equal to the RELATED_TIME_SERIES dataset frequency.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.ForecastHorizon"> <summary> <para> <para>Specifies the number of time-steps that the model is trained to predict. The forecast horizon is also called the prediction length.</para><para>For example, if you configure a dataset for daily data collection (using the <code>DataFrequency</code> parameter of the <a>CreateDataset</a> operation) and set the forecast horizon to 10, the model returns predictions for 10 days.</para><para>The maximum forecast horizon is the lesser of 500 time-steps or 1/3 of the TARGET_TIME_SERIES dataset length.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.ParameterRanges_IntegerParameterRange"> <summary> <para> <para>Specifies the tunable range for each integer hyperparameter.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.EncryptionConfig_KMSKeyArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the KMS key.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.EvaluationParameters_NumberOfBacktestWindow"> <summary> <para> <para>The number of times to split the input data. The default is 1. Valid values are 1 through 5.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.PerformAutoML"> <summary> <para> <para>Whether to perform AutoML. When Amazon Forecast performs AutoML, it evaluates the algorithms it provides and chooses the best algorithm and configuration for your training dataset.</para><para>The default value is <code>false</code>. In this case, you are required to specify an algorithm.</para><para>Set <code>PerformAutoML</code> to <code>true</code> to have Amazon Forecast perform AutoML. This is a good option if you aren't sure which algorithm is suitable for your training data. In this case, <code>PerformHPO</code> must be false.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.PerformHPO"> <summary> <para> <para>Whether to perform hyperparameter optimization (HPO). HPO finds optimal hyperparameter values for your training data. The process of performing HPO is known as running a hyperparameter tuning job.</para><para>The default value is <code>false</code>. In this case, Amazon Forecast uses default hyperparameter values from the chosen algorithm.</para><para>To override the default values, set <code>PerformHPO</code> to <code>true</code> and, optionally, supply the <a>HyperParameterTuningJobConfig</a> object. The tuning job specifies a metric to optimize, which hyperparameters participate in tuning, and the valid range for each tunable hyperparameter. In this case, you are required to specify an algorithm and <code>PerformAutoML</code> must be false.</para><para>The following algorithm supports HPO:</para><ul><li><para>DeepAR+</para></li></ul> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.PredictorName"> <summary> <para> <para>A name for the predictor.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.EncryptionConfig_RoleArn"> <summary> <para> <para>The ARN of the IAM role that Amazon Forecast can assume to access the AWS KMS key.</para><para>Passing a role across AWS accounts is not allowed. If you pass a role that isn't in your account, you get an <code>InvalidInputException</code> error.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.InputDataConfig_SupplementaryFeature"> <summary> <para> <para>An array of supplementary features. The only supported feature is a holiday calendar.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.TrainingParameter"> <summary> <para> <para>The hyperparameters to override for model training. The hyperparameters that you can override are listed in the individual algorithms. For the list of supported algorithms, see <a>aws-forecast-choosing-recipes</a>.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'PredictorArn'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.CreatePredictorResponse). Specifying the name of a property of type Amazon.ForecastService.Model.CreatePredictorResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the PredictorName parameter. The -PassThru parameter is deprecated, use -Select '^PredictorName' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.NewFRCPredictorCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetCmdlet"> <summary> Deletes an Amazon Forecast dataset that was created using the <a>CreateDataset</a> operation. You can only delete datasets that have a status of <code>ACTIVE</code> or <code>CREATE_FAILED</code>. To get the status use the <a>DescribeDataset</a> operation. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetCmdlet.DatasetArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the dataset to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.DeleteDatasetResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DatasetArn parameter. The -PassThru parameter is deprecated, use -Select '^DatasetArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetGroupCmdlet"> <summary> Deletes a dataset group created using the <a>CreateDatasetGroup</a> operation. You can only delete dataset groups that have a status of <code>ACTIVE</code>, <code>CREATE_FAILED</code>, or <code>UPDATE_FAILED</code>. To get the status, use the <a>DescribeDatasetGroup</a> operation. <para> This operation deletes only the dataset group, not the datasets in the group. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetGroupCmdlet.DatasetGroupArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the dataset group to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.DeleteDatasetGroupResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DatasetGroupArn parameter. The -PassThru parameter is deprecated, use -Select '^DatasetGroupArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetImportJobCmdlet"> <summary> Deletes a dataset import job created using the <a>CreateDatasetImportJob</a> operation. You can delete only dataset import jobs that have a status of <code>ACTIVE</code> or <code>CREATE_FAILED</code>. To get the status, use the <a>DescribeDatasetImportJob</a> operation. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetImportJobCmdlet.DatasetImportJobArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the dataset import job to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetImportJobCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.DeleteDatasetImportJobResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetImportJobCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DatasetImportJobArn parameter. The -PassThru parameter is deprecated, use -Select '^DatasetImportJobArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCDatasetImportJobCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCForecastCmdlet"> <summary> Deletes a forecast created using the <a>CreateForecast</a> operation. You can delete only forecasts that have a status of <code>ACTIVE</code> or <code>CREATE_FAILED</code>. To get the status, use the <a>DescribeForecast</a> operation. <para> You can't delete a forecast while it is being exported. After a forecast is deleted, you can no longer query the forecast. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCForecastCmdlet.ForecastArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the forecast to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCForecastCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.DeleteForecastResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCForecastCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ForecastArn parameter. The -PassThru parameter is deprecated, use -Select '^ForecastArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCForecastCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCForecastExportJobCmdlet"> <summary> Deletes a forecast export job created using the <a>CreateForecastExportJob</a> operation. You can delete only export jobs that have a status of <code>ACTIVE</code> or <code>CREATE_FAILED</code>. To get the status, use the <a>DescribeForecastExportJob</a> operation. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCForecastExportJobCmdlet.ForecastExportJobArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the forecast export job to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCForecastExportJobCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.DeleteForecastExportJobResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCForecastExportJobCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the ForecastExportJobArn parameter. The -PassThru parameter is deprecated, use -Select '^ForecastExportJobArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCForecastExportJobCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCPredictorCmdlet"> <summary> Deletes a predictor created using the <a>CreatePredictor</a> operation. You can delete only predictor that have a status of <code>ACTIVE</code> or <code>CREATE_FAILED</code>. To get the status, use the <a>DescribePredictor</a> operation. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCPredictorCmdlet.PredictorArn"> <summary> <para> <para>The Amazon Resource Name (ARN) of the predictor to delete.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCPredictorCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.DeletePredictorResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCPredictorCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the PredictorArn parameter. The -PassThru parameter is deprecated, use -Select '^PredictorArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.RemoveFRCPredictorCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.FRC.UpdateFRCDatasetGroupCmdlet"> <summary> Replaces the datasets in a dataset group with the specified datasets. <note><para> The <code>Status</code> of the dataset group must be <code>ACTIVE</code> before you can use the dataset group to create a predictor. Use the <a>DescribeDatasetGroup</a> operation to get the status. </para></note> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.UpdateFRCDatasetGroupCmdlet.DatasetArn"> <summary> <para> <para>An array of the Amazon Resource Names (ARNs) of the datasets to add to the dataset group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.UpdateFRCDatasetGroupCmdlet.DatasetGroupArn"> <summary> <para> <para>The ARN of the dataset group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.UpdateFRCDatasetGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.ForecastService.Model.UpdateDatasetGroupResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.UpdateFRCDatasetGroupCmdlet.PassThru"> <summary> Changes the cmdlet behavior to return the value passed to the DatasetGroupArn parameter. The -PassThru parameter is deprecated, use -Select '^DatasetGroupArn' instead. This parameter will be removed in a future version. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.FRC.UpdateFRCDatasetGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> </members> </doc> |