AWS.Tools.MediaStore.XML

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>AWS.Tools.MediaStore</name>
    </assembly>
    <members>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.AddEMSResourceTagCmdlet">
            <summary>
            Adds tags to the specified AWS Elemental MediaStore container. Tags are key:value
            pairs that you can associate with AWS resources. For example, the tag key might be
            "customer" and the tag value might be "companyA." You can specify one or more tags
            to add to each container. You can add up to 50 tags to each container. For more information
            about tagging, including naming and usage conventions, see <a href="https://docs.aws.amazon.com/mediastore/latest/ug/tagging.html">Tagging
            Resources in MediaStore</a>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.AddEMSResourceTagCmdlet.Resource">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) for the container. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.AddEMSResourceTagCmdlet.Tag">
            <summary>
            <para>
            <para>An array of key:value pairs that you want to add to the container. You need to specify
            only the tags that you want to add or update. For example, suppose a container already
            has two tags (customer:CompanyA and priority:High). You want to change the priority
            tag and also add a third tag (type:Contract). For TagResource, you specify the following
            tags: priority:Medium, type:Contract. The result is that your container has three
            tags: customer:CompanyA, priority:Medium, and type:Contract.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.AddEMSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.TagResourceResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.AddEMSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Resource parameter.
            The -PassThru parameter is deprecated, use -Select '^Resource' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.AddEMSResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.GetEMSContainerCmdlet">
            <summary>
            Retrieves the properties of the requested container. This request is commonly used
            to retrieve the endpoint of a container. An endpoint is a value assigned by the service
            when a new container is created. A container's endpoint does not change after it has
            been assigned. The <c>DescribeContainer</c> request returns a single <c>Container</c>
            object based on <c>ContainerName</c>. To return all <c>Container</c> objects that
            are associated with a specified AWS account, use <a>ListContainers</a>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSContainerCmdlet.Name">
            <summary>
            <para>
            <para>The name of the container to query.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSContainerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Container'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.DescribeContainerResponse).
            Specifying the name of a property of type Amazon.MediaStore.Model.DescribeContainerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSContainerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.GetEMSContainerListCmdlet">
            <summary>
            Lists the properties of all containers in AWS Elemental MediaStore.
             
              
            <para>
            You can query to receive all the containers in one response. Or you can include the
            <c>MaxResults</c> parameter to receive a limited number of containers in each response.
            In this case, the response includes a token. To get the next set of containers, send
            the command again, this time with the <c>NextToken</c> parameter (with the returned
            token as its value). The next set of responses appears, with a token if there are
            still more containers to receive.
            </para><para>
            See also <a>DescribeContainer</a>, which gets the properties of one container.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSContainerListCmdlet.MaxResult">
            <summary>
            <para>
            <para>Enter the maximum number of containers in the response. Use from 1 to 255 characters.
            </para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSContainerListCmdlet.NextToken">
            <summary>
            <para>
            <para>Only if you used <c>MaxResults</c> in the first command, enter the token (which was
            included in the previous response) to obtain the next set of containers. This token
            is included in a response only if there actually are more containers to list.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSContainerListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Containers'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.ListContainersResponse).
            Specifying the name of a property of type Amazon.MediaStore.Model.ListContainersResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSContainerListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.GetEMSContainerPolicyCmdlet">
            <summary>
            Retrieves the access policy for the specified container. For information about the
            data that is included in an access policy, see the <a href="https://aws.amazon.com/documentation/iam/">AWS
            Identity and Access Management User Guide</a>.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSContainerPolicyCmdlet.Name">
            <summary>
            <para>
            <para>The name of the container. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSContainerPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Policy'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.GetContainerPolicyResponse).
            Specifying the name of a property of type Amazon.MediaStore.Model.GetContainerPolicyResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSContainerPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.GetEMSCorsPolicyCmdlet">
            <summary>
            Returns the cross-origin resource sharing (CORS) configuration information that is
            set for the container.
             
              
            <para>
            To use this operation, you must have permission to perform the <c>MediaStore:GetCorsPolicy</c>
            action. By default, the container owner has this permission and can grant it to others.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSCorsPolicyCmdlet.ContainerName">
            <summary>
            <para>
            <para>The name of the container that the policy is assigned to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSCorsPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'CorsPolicy'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.GetCorsPolicyResponse).
            Specifying the name of a property of type Amazon.MediaStore.Model.GetCorsPolicyResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSCorsPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ContainerName parameter.
            The -PassThru parameter is deprecated, use -Select '^ContainerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.GetEMSLifecyclePolicyCmdlet">
            <summary>
            Retrieves the object lifecycle policy that is assigned to a container.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSLifecyclePolicyCmdlet.ContainerName">
            <summary>
            <para>
            <para>The name of the container that the object lifecycle policy is assigned to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSLifecyclePolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'LifecyclePolicy'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.GetLifecyclePolicyResponse).
            Specifying the name of a property of type Amazon.MediaStore.Model.GetLifecyclePolicyResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSLifecyclePolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ContainerName parameter.
            The -PassThru parameter is deprecated, use -Select '^ContainerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.GetEMSMetricPolicyCmdlet">
            <summary>
            Returns the metric policy for the specified container.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSMetricPolicyCmdlet.ContainerName">
            <summary>
            <para>
            <para>The name of the container that is associated with the metric policy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSMetricPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'MetricPolicy'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.GetMetricPolicyResponse).
            Specifying the name of a property of type Amazon.MediaStore.Model.GetMetricPolicyResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSMetricPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ContainerName parameter.
            The -PassThru parameter is deprecated, use -Select '^ContainerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.GetEMSResourceTagCmdlet">
            <summary>
            Returns a list of the tags assigned to the specified container.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSResourceTagCmdlet.Resource">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) for the container.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Tags'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.ListTagsForResourceResponse).
            Specifying the name of a property of type Amazon.MediaStore.Model.ListTagsForResourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.GetEMSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Resource parameter.
            The -PassThru parameter is deprecated, use -Select '^Resource' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.NewEMSContainerCmdlet">
            <summary>
            Creates a storage container to hold objects. A container is similar to a bucket in
            the Amazon S3 service.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.NewEMSContainerCmdlet.Name">
            <summary>
            <para>
            <para>The name for the container. The name must be from 1 to 255 characters. Container names
            must be unique to your AWS account within a specific region. As an example, you could
            create a container named <c>movies</c> in every region, as long as you don’t have
            an existing container with that name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.NewEMSContainerCmdlet.Tag">
            <summary>
            <para>
            <para>An array of key:value pairs that you define. These values can be anything that you
            want. Typically, the tag key represents a category (such as "environment") and the
            tag value represents a specific value within that category (such as "test," "development,"
            or "production"). You can add up to 50 tags to each container. For more information
            about tagging, including naming and usage conventions, see <a href="https://docs.aws.amazon.com/mediastore/latest/ug/tagging.html">Tagging
            Resources in MediaStore</a>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.NewEMSContainerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Container'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.CreateContainerResponse).
            Specifying the name of a property of type Amazon.MediaStore.Model.CreateContainerResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.NewEMSContainerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.NewEMSContainerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSContainerCmdlet">
            <summary>
            Deletes the specified container. Before you make a <c>DeleteContainer</c> request,
            delete any objects in the container or in any folders in the container. You can delete
            only empty containers.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSContainerCmdlet.Name">
            <summary>
            <para>
            <para>The name of the container to delete. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSContainerCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.DeleteContainerResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSContainerCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSContainerCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSContainerPolicyCmdlet">
            <summary>
            Deletes the access policy that is associated with the specified container.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSContainerPolicyCmdlet.Name">
            <summary>
            <para>
            <para>The name of the container that holds the policy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSContainerPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.DeleteContainerPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSContainerPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Name parameter.
            The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSContainerPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSCorsPolicyCmdlet">
            <summary>
            Deletes the cross-origin resource sharing (CORS) configuration information that is
            set for the container.
             
              
            <para>
            To use this operation, you must have permission to perform the <c>MediaStore:DeleteCorsPolicy</c>
            action. The container owner has this permission by default and can grant this permission
            to others.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSCorsPolicyCmdlet.ContainerName">
            <summary>
            <para>
            <para>The name of the container to remove the policy from.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSCorsPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.DeleteCorsPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSCorsPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ContainerName parameter.
            The -PassThru parameter is deprecated, use -Select '^ContainerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSCorsPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSLifecyclePolicyCmdlet">
            <summary>
            Removes an object lifecycle policy from a container. It takes up to 20 minutes for
            the change to take effect.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSLifecyclePolicyCmdlet.ContainerName">
            <summary>
            <para>
            <para>The name of the container that holds the object lifecycle policy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSLifecyclePolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.DeleteLifecyclePolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSLifecyclePolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ContainerName parameter.
            The -PassThru parameter is deprecated, use -Select '^ContainerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSLifecyclePolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSMetricPolicyCmdlet">
            <summary>
            Deletes the metric policy that is associated with the specified container. If there
            is no metric policy associated with the container, MediaStore doesn't send metrics
            to CloudWatch.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSMetricPolicyCmdlet.ContainerName">
            <summary>
            <para>
            <para>The name of the container that is associated with the metric policy that you want
            to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSMetricPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.DeleteMetricPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSMetricPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ContainerName parameter.
            The -PassThru parameter is deprecated, use -Select '^ContainerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSMetricPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSResourceTagCmdlet">
            <summary>
            Removes tags from the specified container. You can specify one or more tags to remove.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSResourceTagCmdlet.Resource">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) for the container.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSResourceTagCmdlet.TagKey">
            <summary>
            <para>
            <para>A comma-separated list of keys for tags that you want to remove from the container.
            For example, if your container has two tags (customer:CompanyA and priority:High)
            and you want to remove one of the tags (priority:High), you specify the key for the
            tag that you want to remove (priority).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.UntagResourceResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Resource parameter.
            The -PassThru parameter is deprecated, use -Select '^Resource' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.RemoveEMSResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.StartEMSAccessLoggingCmdlet">
            <summary>
            Starts access logging on the specified container. When you enable access logging on
            a container, MediaStore delivers access logs for objects stored in that container
            to Amazon CloudWatch Logs.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.StartEMSAccessLoggingCmdlet.ContainerName">
            <summary>
            <para>
            <para>The name of the container that you want to start access logging on.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.StartEMSAccessLoggingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.StartAccessLoggingResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.StartEMSAccessLoggingCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ContainerName parameter.
            The -PassThru parameter is deprecated, use -Select '^ContainerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.StartEMSAccessLoggingCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.StopEMSAccessLoggingCmdlet">
            <summary>
            Stops access logging on the specified container. When you stop access logging on a
            container, MediaStore stops sending access logs to Amazon CloudWatch Logs. These access
            logs are not saved and are not retrievable.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.StopEMSAccessLoggingCmdlet.ContainerName">
            <summary>
            <para>
            <para>The name of the container that you want to stop access logging on.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.StopEMSAccessLoggingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.StopAccessLoggingResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.StopEMSAccessLoggingCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ContainerName parameter.
            The -PassThru parameter is deprecated, use -Select '^ContainerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.StopEMSAccessLoggingCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.WriteEMSContainerPolicyCmdlet">
            <summary>
            Creates an access policy for the specified container to restrict the users and clients
            that can access it. For information about the data that is included in an access policy,
            see the <a href="https://aws.amazon.com/documentation/iam/">AWS Identity and Access
            Management User Guide</a>.
             
              
            <para>
            For this release of the REST API, you can create only one policy for a container.
            If you enter <c>PutContainerPolicy</c> twice, the second command modifies the existing
            policy.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSContainerPolicyCmdlet.Name">
            <summary>
            <para>
            <para>The name of the container.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSContainerPolicyCmdlet.Policy">
            <summary>
            <para>
            <para>The contents of the policy, which includes the following: </para><ul><li><para>One <c>Version</c> tag</para></li><li><para>One <c>Statement</c> tag that contains the standard tags for the policy.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSContainerPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.PutContainerPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSContainerPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Policy parameter.
            The -PassThru parameter is deprecated, use -Select '^Policy' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSContainerPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.WriteEMSCorsPolicyCmdlet">
            <summary>
            Sets the cross-origin resource sharing (CORS) configuration on a container so that
            the container can service cross-origin requests. For example, you might want to enable
            a request whose origin is http://www.example.com to access your AWS Elemental MediaStore
            container at my.example.container.com by using the browser's XMLHttpRequest capability.
             
              
            <para>
            To enable CORS on a container, you attach a CORS policy to the container. In the CORS
            policy, you configure rules that identify origins and the HTTP methods that can be
            executed on your container. The policy can contain up to 398,000 characters. You can
            add up to 100 rules to a CORS policy. If more than one rule applies, the service uses
            the first applicable rule listed.
            </para><para>
            To learn more about CORS, see <a href="https://docs.aws.amazon.com/mediastore/latest/ug/cors-policy.html">Cross-Origin
            Resource Sharing (CORS) in AWS Elemental MediaStore</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSCorsPolicyCmdlet.ContainerName">
            <summary>
            <para>
            <para>The name of the container that you want to assign the CORS policy to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSCorsPolicyCmdlet.CorsPolicy">
            <summary>
            <para>
            <para>The CORS policy to apply to the container. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSCorsPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.PutCorsPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSCorsPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ContainerName parameter.
            The -PassThru parameter is deprecated, use -Select '^ContainerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSCorsPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.WriteEMSLifecyclePolicyCmdlet">
            <summary>
            Writes an object lifecycle policy to a container. If the container already has an
            object lifecycle policy, the service replaces the existing policy with the new policy.
            It takes up to 20 minutes for the change to take effect.
             
              
            <para>
            For information about how to construct an object lifecycle policy, see <a href="https://docs.aws.amazon.com/mediastore/latest/ug/policies-object-lifecycle-components.html">Components
            of an Object Lifecycle Policy</a>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSLifecyclePolicyCmdlet.ContainerName">
            <summary>
            <para>
            <para>The name of the container that you want to assign the object lifecycle policy to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSLifecyclePolicyCmdlet.LifecyclePolicy">
            <summary>
            <para>
            <para>The object lifecycle policy to apply to the container.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSLifecyclePolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.PutLifecyclePolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSLifecyclePolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the LifecyclePolicy parameter.
            The -PassThru parameter is deprecated, use -Select '^LifecyclePolicy' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSLifecyclePolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.EMS.WriteEMSMetricPolicyCmdlet">
            <summary>
            The metric policy that you want to add to the container. A metric policy allows AWS
            Elemental MediaStore to send metrics to Amazon CloudWatch. It takes up to 20 minutes
            for the new policy to take effect.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSMetricPolicyCmdlet.MetricPolicy_ContainerLevelMetric">
            <summary>
            <para>
            <para>A setting to enable or disable metrics at the container level.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSMetricPolicyCmdlet.ContainerName">
            <summary>
            <para>
            <para>The name of the container that you want to add the metric policy to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSMetricPolicyCmdlet.MetricPolicy_MetricPolicyRule">
            <summary>
            <para>
            <para>A parameter that holds an array of rules that enable metrics at the object level.
            This parameter is optional, but if you choose to include it, you must also include
            at least one rule. By default, you can include up to five rules. You can also <a href="https://console.aws.amazon.com/servicequotas/home?region=us-east-1#!/services/mediastore/quotas">request
            a quota increase</a> to allow up to 300 rules per policy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSMetricPolicyCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MediaStore.Model.PutMetricPolicyResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSMetricPolicyCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ContainerName parameter.
            The -PassThru parameter is deprecated, use -Select '^ContainerName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.EMS.WriteEMSMetricPolicyCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
    </members>
</doc>