AWS.Tools.QuickSight.XML

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>AWS.Tools.QuickSight</name>
    </assembly>
    <members>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.AddQSResourceTagCmdlet">
            <summary>
            Assigns one or more tags (key-value pairs) to the specified QuickSight resource.
             
              
            <para>
            Tags can help you organize and categorize your resources. You can also use them to
            scope user permissions, by granting a user permission to access or change only resources
            with certain tag values. You can use the <code>TagResource</code> operation with a
            resource that already has tags. If you specify a new tag key for the resource, this
            tag is appended to the list of tags associated with the resource. If you specify a
            tag key that is already associated with the resource, the new tag value that you specify
            replaces the previous value for that tag.
            </para><para>
            You can associate as many as 50 tags with a resource. QuickSight supports tagging
            on data set, data source, dashboard, and template.
            </para><para>
            Tagging for QuickSight works in a similar way to tagging for other AWS services, except
            for the following:
            </para><ul><li><para>
            You can't use tags to track AWS costs for QuickSight. This restriction is because
            QuickSight costs are based on users and SPICE capacity, which aren't taggable resources.
            </para></li><li><para>
            QuickSight doesn't currently support the Tag Editor for AWS Resource Groups.
            </para></li></ul>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.AddQSResourceTagCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource that you want to tag.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.AddQSResourceTagCmdlet.Tag">
            <summary>
            <para>
            <para>Contains a map of the key-value pairs for the resource tag or tags assigned to the
            resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.AddQSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.TagResourceResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.TagResourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.AddQSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceArn parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.AddQSResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSAccountCustomizationCmdlet">
            <summary>
            Describes the customizations associated with the provided AWS account and Amazon QuickSight
            namespace in an AWS Region. The QuickSight console evaluates which customizations
            to apply by running this API operation with the <code>Resolved</code> flag included.
             
             
              
            <para>
            To determine what customizations display when you run this command, it can help to
            visualize the relationship of the entities involved.
            </para><ul><li><para><code>AWS Account</code> - The AWS account exists at the top of the hierarchy. It
            has the potential to use all of the AWS Regions and AWS Services. When you subscribe
            to QuickSight, you choose one AWS Region to use as your home Region. That's where
            your free SPICE capacity is located. You can use QuickSight in any supported AWS Region.
             
            </para></li><li><para><code>AWS Region</code> - In each AWS Region where you sign in to QuickSight at least
            once, QuickSight acts as a separate instance of the same service. If you have a user
            directory, it resides in us-east-1, which is the US East (N. Virginia). Generally
            speaking, these users have access to QuickSight in any AWS Region, unless they are
            constrained to a namespace.
            </para><para>
            To run the command in a different AWS Region, you change your Region settings. If
            you're using the AWS CLI, you can use one of the following options:
            </para><ul><li><para>
            Use <a href="https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-options.html">command
            line options</a>.
            </para></li><li><para>
            Use <a href="https://docs.aws.amazon.com/cli/latest/userguide/cli-configure-profiles.html">named
            profiles</a>.
            </para></li><li><para>
            Run <code>aws configure</code> to change your default AWS Region. Use Enter to key
            the same settings for your keys. For more information, see <a href="https://docs.aws.amazon.com/cli/latest/userguide/cli-chap-configure.html">Configuring
            the AWS CLI</a>.
            </para></li></ul></li><li><para><code>Namespace</code> - A QuickSight namespace is a partition that contains users
            and assets (data sources, datasets, dashboards, and so on). To access assets that
            are in a specific namespace, users and groups must also be part of the same namespace.
            People who share a namespace are completely isolated from users and assets in other
            namespaces, even if they are in the same AWS account and AWS Region.
            </para></li><li><para><code>Applied customizations</code> - Within an AWS Region, a set of QuickSight customizations
            can apply to an AWS account or to a namespace. Settings that you apply to a namespace
            override settings that you apply to an AWS account. All settings are isolated to a
            single AWS Region. To apply them in other AWS Regions, run the <code>CreateAccountCustomization</code>
            command in each AWS Region where you want to apply the same customizations.
            </para></li></ul>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAccountCustomizationCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that you want to describe QuickSight customizations for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAccountCustomizationCmdlet.Namespace">
            <summary>
            <para>
            <para>The QuickSight namespace that you want to describe QuickSight customizations for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAccountCustomizationCmdlet.Resolved">
            <summary>
            <para>
            <para>The <code>Resolved</code> flag works with the other parameters to determine which
            view of QuickSight customizations is returned. You can add this flag to your command
            to use the same view that QuickSight uses to identify which customizations to apply
            to the console. Omit this flag, or set it to <code>no-resolved</code>, to reveal customizations
            that are configured at different levels. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAccountCustomizationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeAccountCustomizationResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeAccountCustomizationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAccountCustomizationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSAccountSettingCmdlet">
            <summary>
            Describes the settings that were used when your QuickSight subscription was first
            created in this AWS account.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAccountSettingCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that contains the settings that you want to list.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAccountSettingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'AccountSettings'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeAccountSettingsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeAccountSettingsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAccountSettingCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisCmdlet">
            <summary>
            Provides a summary of the metadata for an analysis.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisCmdlet.AnalysisId">
            <summary>
            <para>
            <para>The ID of the analysis that you're describing. The ID is part of the URL of the analysis.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the analysis. You must be using the AWS account
            that the analysis is in.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Analysis'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeAnalysisResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeAnalysisResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AnalysisId parameter.
            The -PassThru parameter is deprecated, use -Select '^AnalysisId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisListCmdlet">
            <summary>
            Lists Amazon QuickSight analyses that exist in the specified AWS account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the analyses.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to return.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisListCmdlet.NextToken">
            <summary>
            <para>
            <para>A pagination token that can be used in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'AnalysisSummaryList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListAnalysesResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListAnalysesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisPermissionCmdlet">
            <summary>
            Provides the read and write permissions for an analysis.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisPermissionCmdlet.AnalysisId">
            <summary>
            <para>
            <para>The ID of the analysis whose permissions you're describing. The ID is part of the
            analysis URL.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisPermissionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the analysis whose permissions you're describing.
            You must be using the AWS account that the analysis is in.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisPermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeAnalysisPermissionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeAnalysisPermissionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSAnalysisPermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AnalysisId parameter.
            The -PassThru parameter is deprecated, use -Select '^AnalysisId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardCmdlet">
            <summary>
            Provides a summary for a dashboard.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardCmdlet.AliasName">
            <summary>
            <para>
            <para>The alias name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the dashboard that you're describing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardCmdlet.DashboardId">
            <summary>
            <para>
            <para>The ID for the dashboard.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardCmdlet.VersionNumber">
            <summary>
            <para>
            <para>The version number for the dashboard. If a version number isn't passed, the latest
            published dashboard version is described. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Dashboard'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeDashboardResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeDashboardResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DashboardId parameter.
            The -PassThru parameter is deprecated, use -Select '^DashboardId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardEmbedUrlCmdlet">
            <summary>
            Generates a session URL and authorization code that you can use to embed an Amazon
            QuickSight read-only dashboard in your web server code. Before you use this command,
            make sure that you have configured the dashboards and permissions.
             
              
            <para>
            Currently, you can use <code>GetDashboardEmbedURL</code> only from the server, not
            from the user's browser. The following rules apply to the combination of URL and authorization
            code:
            </para><ul><li><para>
            They must be used together.
            </para></li><li><para>
            They can be used one time only.
            </para></li><li><para>
            They are valid for 5 minutes after you run this command.
            </para></li><li><para>
            The resulting user session is valid for 10 hours.
            </para></li></ul><para>
            For more information, see <a href="https://docs.aws.amazon.com/quicksight/latest/user/embedding-dashboards.html">Embedding
            Amazon QuickSight</a> in the <i>Amazon QuickSight User Guide</i> .
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardEmbedUrlCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that contains the dashboard that you're embedding.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardEmbedUrlCmdlet.DashboardId">
            <summary>
            <para>
            <para>The ID for the dashboard, also added to the IAM policy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardEmbedUrlCmdlet.IdentityType">
            <summary>
            <para>
            <para>The authentication method that the user uses to sign in.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardEmbedUrlCmdlet.ResetDisabled">
            <summary>
            <para>
            <para>Remove the reset button on the embedded dashboard. The default is FALSE, which enables
            the reset button.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardEmbedUrlCmdlet.SessionLifetimeInMinute">
            <summary>
            <para>
            <para>How many minutes the session is valid. The session lifetime must be 15-600 minutes.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardEmbedUrlCmdlet.UndoRedoDisabled">
            <summary>
            <para>
            <para>Remove the undo/redo button on the embedded dashboard. The default is FALSE, which
            enables the undo/redo button.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardEmbedUrlCmdlet.UserArn">
            <summary>
            <para>
            <para>The Amazon QuickSight user's Amazon Resource Name (ARN), for use with <code>QUICKSIGHT</code>
            identity type. You can use this for any Amazon QuickSight users in your account (readers,
            authors, or admins) authenticated as one of the following:</para><ul><li><para>Active Directory (AD) users or group members</para></li><li><para>Invited nonfederated users</para></li><li><para>IAM users and IAM role-based sessions authenticated through Federated Single Sign-On
            using SAML, OpenID Connect, or IAM federation.</para></li></ul><para>Omit this parameter for users in the third group – IAM users and IAM role-based sessions.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardEmbedUrlCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'EmbedUrl'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.GetDashboardEmbedUrlResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.GetDashboardEmbedUrlResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardEmbedUrlCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DashboardId parameter.
            The -PassThru parameter is deprecated, use -Select '^DashboardId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardListCmdlet">
            <summary>
            Lists dashboards in an AWS account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the dashboards that you're listing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DashboardSummaryList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListDashboardsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListDashboardsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardPermissionCmdlet">
            <summary>
            Describes read and write permissions for a dashboard.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardPermissionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the dashboard that you're describing permissions
            for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardPermissionCmdlet.DashboardId">
            <summary>
            <para>
            <para>The ID for the dashboard, also added to the IAM policy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardPermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeDashboardPermissionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeDashboardPermissionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardPermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DashboardId parameter.
            The -PassThru parameter is deprecated, use -Select '^DashboardId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardVersionListCmdlet">
            <summary>
            Lists all the versions of the dashboards in the QuickSight subscription.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardVersionListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the dashboard that you're listing versions
            for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardVersionListCmdlet.DashboardId">
            <summary>
            <para>
            <para>The ID for the dashboard.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardVersionListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardVersionListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardVersionListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DashboardVersionSummaryList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListDashboardVersionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListDashboardVersionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardVersionListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DashboardId parameter.
            The -PassThru parameter is deprecated, use -Select '^DashboardId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDashboardVersionListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetCmdlet">
            <summary>
            Describes a dataset.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetCmdlet.DataSetId">
            <summary>
            <para>
            <para>The ID for the dataset that you want to create. This ID is unique per AWS Region for
            each AWS account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DataSet'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeDataSetResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeDataSetResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DataSetId parameter.
            The -PassThru parameter is deprecated, use -Select '^DataSetId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetListCmdlet">
            <summary>
            Lists all of the datasets belonging to the current AWS account in an AWS Region.
             
              
            <para>
            The permissions resource is <code>arn:aws:quicksight:region:aws-account-id:dataset/*</code>.
            </para><br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DataSetSummaries'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListDataSetsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListDataSetsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetPermissionCmdlet">
            <summary>
            Describes the permissions on a dataset.
             
              
            <para>
            The permissions resource is <code>arn:aws:quicksight:region:aws-account-id:dataset/data-set-id</code>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetPermissionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetPermissionCmdlet.DataSetId">
            <summary>
            <para>
            <para>The ID for the dataset that you want to create. This ID is unique per AWS Region for
            each AWS account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetPermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeDataSetPermissionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeDataSetPermissionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSetPermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DataSetId parameter.
            The -PassThru parameter is deprecated, use -Select '^DataSetId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourceCmdlet">
            <summary>
            Describes a data source.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourceCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourceCmdlet.DataSourceId">
            <summary>
            <para>
            <para>The ID of the data source. This ID is unique per AWS Region for each AWS account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DataSource'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeDataSourceResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeDataSourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DataSourceId parameter.
            The -PassThru parameter is deprecated, use -Select '^DataSourceId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourceListCmdlet">
            <summary>
            Lists data sources in current AWS Region that belong to this AWS account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourceListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourceListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourceListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourceListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DataSources'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListDataSourcesResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListDataSourcesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourceListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourceListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourcePermissionCmdlet">
            <summary>
            Describes the resource permissions for a data source.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourcePermissionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourcePermissionCmdlet.DataSourceId">
            <summary>
            <para>
            <para>The ID of the data source. This ID is unique per AWS Region for each AWS account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourcePermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeDataSourcePermissionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeDataSourcePermissionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSDataSourcePermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DataSourceId parameter.
            The -PassThru parameter is deprecated, use -Select '^DataSourceId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSGroupCmdlet">
            <summary>
            Returns an Amazon QuickSight group's description and Amazon Resource Name (ARN).
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the group is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupCmdlet.GroupName">
            <summary>
            <para>
            <para>The name of the group that you want to describe.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Group'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeGroupResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeGroupResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the GroupName parameter.
            The -PassThru parameter is deprecated, use -Select '^GroupName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSGroupListCmdlet">
            <summary>
            Lists all user groups in Amazon QuickSight.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the group is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupListCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to return.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupListCmdlet.NextToken">
            <summary>
            <para>
            <para>A pagination token that can be used in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'GroupList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListGroupsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListGroupsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSGroupMembershipListCmdlet">
            <summary>
            Lists member users in a group.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupMembershipListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the group is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupMembershipListCmdlet.GroupName">
            <summary>
            <para>
            <para>The name of the group that you want to see a membership list of.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupMembershipListCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupMembershipListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to return from this request.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupMembershipListCmdlet.NextToken">
            <summary>
            <para>
            <para>A pagination token that can be used in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupMembershipListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'GroupMemberList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListGroupMembershipsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListGroupMembershipsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupMembershipListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the GroupName parameter.
            The -PassThru parameter is deprecated, use -Select '^GroupName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSGroupMembershipListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentCmdlet">
            <summary>
            Describes an existing IAM policy assignment, as specified by the assignment name.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentCmdlet.AssignmentName">
            <summary>
            <para>
            <para>The name of the assignment. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the assignment that you want to describe.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace that contains the assignment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'IAMPolicyAssignment'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeIAMPolicyAssignmentResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeIAMPolicyAssignmentResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AssignmentName parameter.
            The -PassThru parameter is deprecated, use -Select '^AssignmentName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentListCmdlet">
            <summary>
            Lists IAM policy assignments in the current Amazon QuickSight account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentListCmdlet.AssignmentStatus">
            <summary>
            <para>
            <para>The status of the assignments.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains these IAM policy assignments.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentListCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace for the assignments.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'IAMPolicyAssignments'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListIAMPolicyAssignmentsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListIAMPolicyAssignmentsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Namespace parameter.
            The -PassThru parameter is deprecated, use -Select '^Namespace' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentsForUserListCmdlet">
            <summary>
            Lists all the IAM policy assignments, including the Amazon Resource Names (ARNs) for
            the IAM policies assigned to the specified user and group or groups that the user
            belongs to.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentsForUserListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the assignments.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentsForUserListCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace of the assignment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentsForUserListCmdlet.UserName">
            <summary>
            <para>
            <para>The name of the user.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentsForUserListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentsForUserListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentsForUserListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ActiveAssignments'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListIAMPolicyAssignmentsForUserResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListIAMPolicyAssignmentsForUserResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentsForUserListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the UserName parameter.
            The -PassThru parameter is deprecated, use -Select '^UserName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIAMPolicyAssignmentsForUserListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionCmdlet">
            <summary>
            Describes a SPICE ingestion.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionCmdlet.DataSetId">
            <summary>
            <para>
            <para>The ID of the dataset used in the ingestion.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionCmdlet.IngestionId">
            <summary>
            <para>
            <para>An ID for the ingestion.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Ingestion'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeIngestionResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeIngestionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the IngestionId parameter.
            The -PassThru parameter is deprecated, use -Select '^IngestionId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionListCmdlet">
            <summary>
            Lists the history of SPICE ingestions for a dataset.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionListCmdlet.DataSetId">
            <summary>
            <para>
            <para>The ID of the dataset used in the ingestion.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Ingestions'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListIngestionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListIngestionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DataSetId parameter.
            The -PassThru parameter is deprecated, use -Select '^DataSetId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSIngestionListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSNamespaceCmdlet">
            <summary>
            Describes the current namespace.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSNamespaceCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that contains the QuickSight namespace that you want to
            describe.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSNamespaceCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace that you want to describe.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSNamespaceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Namespace'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeNamespaceResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeNamespaceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSNamespaceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Namespace parameter.
            The -PassThru parameter is deprecated, use -Select '^Namespace' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSNamespaceListCmdlet">
            <summary>
            Lists the namespaces for the specified AWS account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSNamespaceListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that contains the QuickSight namespaces that you want to
            list.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSNamespaceListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to return.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSNamespaceListCmdlet.NextToken">
            <summary>
            <para>
            <para>A pagination token that can be used in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSNamespaceListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Namespaces'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListNamespacesResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListNamespacesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSNamespaceListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSNamespaceListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSResourceTagCmdlet">
            <summary>
            Lists the tags assigned to a resource.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSResourceTagCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource that you want a list of tags for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Tags'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListTagsForResourceResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListTagsForResourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceArn parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSSessionEmbedUrlCmdlet">
            <summary>
            Generates a session URL and authorization code that you can use to embed the Amazon
            QuickSight console in your web server code. Use <code>GetSessionEmbedUrl</code> where
            you want to provide an authoring portal that allows users to create data sources,
            datasets, analyses, and dashboards. The users who access an embedded QuickSight console
            need belong to the author or admin security cohort. If you want to restrict permissions
            to some of these features, add a custom permissions profile to the user with the <code><a>UpdateUser</a></code> API operation. Use <code><a>RegisterUser</a></code> API
            operation to add a new user with a custom permission profile attached. For more information,
            see the following sections in the <i>Amazon QuickSight User Guide</i>:
             
             <ul><li><para><a href="https://docs.aws.amazon.com/quicksight/latest/user/embedding-the-quicksight-console.html">Embedding
            the Amazon QuickSight Console</a></para></li><li><para><a href="https://docs.aws.amazon.com/quicksight/latest/user/customizing-permissions-to-the-quicksight-console.html">Customizing
            Access to the Amazon QuickSight Console</a></para></li></ul>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSSessionEmbedUrlCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account associated with your QuickSight subscription.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSSessionEmbedUrlCmdlet.EntryPoint">
            <summary>
            <para>
            <para>The URL you use to access the embedded session. The entry point URL is constrained
            to the following paths:</para><ul><li><para><code>/start</code></para></li><li><para><code>/start/analyses</code></para></li><li><para><code>/start/dashboards</code></para></li><li><para><code>/start/favorites</code></para></li><li><para><code>/dashboards/<i>DashboardId</i></code> - where <code>DashboardId</code> is
            the actual ID key from the QuickSight console URL of the dashboard</para></li><li><para><code>/analyses/<i>AnalysisId</i></code> - where <code>AnalysisId</code> is the
            actual ID key from the QuickSight console URL of the analysis</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSSessionEmbedUrlCmdlet.SessionLifetimeInMinute">
            <summary>
            <para>
            <para>How many minutes the session is valid. The session lifetime must be 15-600 minutes.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSSessionEmbedUrlCmdlet.UserArn">
            <summary>
            <para>
            <para>The Amazon QuickSight user's Amazon Resource Name (ARN), for use with <code>QUICKSIGHT</code>
            identity type. You can use this for any type of Amazon QuickSight users in your account
            (readers, authors, or admins). They need to be authenticated as one of the following:</para><ol><li><para>Active Directory (AD) users or group members</para></li><li><para>Invited nonfederated users</para></li><li><para>IAM users and IAM role-based sessions authenticated through Federated Single Sign-On
            using SAML, OpenID Connect, or IAM federation</para></li></ol><para>Omit this parameter for users in the third group – IAM users and IAM role-based sessions.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSSessionEmbedUrlCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'EmbedUrl'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.GetSessionEmbedUrlResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.GetSessionEmbedUrlResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSSessionEmbedUrlCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateCmdlet">
            <summary>
            Describes a template's metadata.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateCmdlet.AliasName">
            <summary>
            <para>
            <para>The alias of the template that you want to describe. If you name a specific alias,
            you describe the version that the alias points to. You can specify the latest version
            of the template by providing the keyword <code>$LATEST</code> in the <code>AliasName</code>
            parameter. The keyword <code>$PUBLISHED</code> doesn't apply to templates.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the template that you're describing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateCmdlet.TemplateId">
            <summary>
            <para>
            <para>The ID for the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateCmdlet.VersionNumber">
            <summary>
            <para>
            <para>(Optional) The number for the version to describe. If a <code>VersionNumber</code>
            parameter value isn't provided, the latest version of the template is described.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Template'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeTemplateResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeTemplateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^TemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasCmdlet">
            <summary>
            Describes the template alias for a template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasCmdlet.AliasName">
            <summary>
            <para>
            <para>The name of the template alias that you want to describe. If you name a specific alias,
            you describe the version that the alias points to. You can specify the latest version
            of the template by providing the keyword <code>$LATEST</code> in the <code>AliasName</code>
            parameter. The keyword <code>$PUBLISHED</code> doesn't apply to templates.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the template alias that you're describing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasCmdlet.TemplateId">
            <summary>
            <para>
            <para>The ID for the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TemplateAlias'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeTemplateAliasResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeTemplateAliasResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AliasName parameter.
            The -PassThru parameter is deprecated, use -Select '^AliasName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasListCmdlet">
            <summary>
            Lists all the aliases of a template.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the template aliases that you're listing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasListCmdlet.TemplateId">
            <summary>
            <para>
            <para>The ID for the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TemplateAliasList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListTemplateAliasesResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListTemplateAliasesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^TemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateAliasListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateListCmdlet">
            <summary>
            Lists all the templates in the current Amazon QuickSight account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the templates that you're listing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TemplateSummaryList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListTemplatesResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListTemplatesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSTemplatePermissionCmdlet">
            <summary>
            Describes read and write permissions on a template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplatePermissionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the template that you're describing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplatePermissionCmdlet.TemplateId">
            <summary>
            <para>
            <para>The ID for the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplatePermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeTemplatePermissionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeTemplatePermissionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplatePermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^TemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateVersionListCmdlet">
            <summary>
            Lists all the versions of the templates in the current Amazon QuickSight account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateVersionListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the templates that you're listing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateVersionListCmdlet.TemplateId">
            <summary>
            <para>
            <para>The ID for the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateVersionListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateVersionListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateVersionListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TemplateVersionSummaryList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListTemplateVersionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListTemplateVersionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateVersionListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^TemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSTemplateVersionListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSThemeCmdlet">
            <summary>
            Describes a theme.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeCmdlet.AliasName">
            <summary>
            <para>
            <para>The alias of the theme that you want to describe. If you name a specific alias, you
            describe the version that the alias points to. You can specify the latest version
            of the theme by providing the keyword <code>$LATEST</code> in the <code>AliasName</code>
            parameter. The keyword <code>$PUBLISHED</code> doesn't apply to themes.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the theme that you're describing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeCmdlet.ThemeId">
            <summary>
            <para>
            <para>The ID for the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeCmdlet.VersionNumber">
            <summary>
            <para>
            <para>The version number for the version to describe. If a <code>VersionNumber</code> parameter
            value isn't provided, the latest version of the theme is described.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Theme'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeThemeResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeThemeResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ThemeId parameter.
            The -PassThru parameter is deprecated, use -Select '^ThemeId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasCmdlet">
            <summary>
            Describes the alias for a theme.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasCmdlet.AliasName">
            <summary>
            <para>
            <para>The name of the theme alias that you want to describe.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the theme alias that you're describing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasCmdlet.ThemeId">
            <summary>
            <para>
            <para>The ID for the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ThemeAlias'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeThemeAliasResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeThemeAliasResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ThemeId parameter.
            The -PassThru parameter is deprecated, use -Select '^ThemeId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasListCmdlet">
            <summary>
            Lists all the aliases of a theme.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the theme aliases that you're listing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasListCmdlet.ThemeId">
            <summary>
            <para>
            <para>The ID for the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ThemeAliasList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListThemeAliasesResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListThemeAliasesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ThemeId parameter.
            The -PassThru parameter is deprecated, use -Select '^ThemeId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeAliasListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSThemeListCmdlet">
            <summary>
            Lists all the themes in the current AWS account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the themes that you're listing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeListCmdlet.Type">
            <summary>
            <para>
            <para>The type of themes that you want to list. Valid options include the following:</para><ul><li><para><code>ALL (default)</code>- Display all existing themes.</para></li><li><para><code>CUSTOM</code> - Display only the themes created by people using Amazon QuickSight.</para></li><li><para><code>QUICKSIGHT</code> - Display only the starting themes defined by QuickSight.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ThemeSummaryList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListThemesResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListThemesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSThemePermissionCmdlet">
            <summary>
            Describes the read and write permissions for a theme.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemePermissionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the theme that you're describing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemePermissionCmdlet.ThemeId">
            <summary>
            <para>
            <para>The ID for the theme that you want to describe permissions for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemePermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeThemePermissionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeThemePermissionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemePermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ThemeId parameter.
            The -PassThru parameter is deprecated, use -Select '^ThemeId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSThemeVersionListCmdlet">
            <summary>
            Lists all the versions of the themes in the current AWS account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeVersionListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the themes that you're listing.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeVersionListCmdlet.ThemeId">
            <summary>
            <para>
            <para>The ID for the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeVersionListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeVersionListCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeVersionListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ThemeVersionSummaryList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListThemeVersionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListThemeVersionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeVersionListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ThemeId parameter.
            The -PassThru parameter is deprecated, use -Select '^ThemeId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSThemeVersionListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSUserCmdlet">
            <summary>
            Returns information about a user, given the user name.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the user is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserCmdlet.UserName">
            <summary>
            <para>
            <para>The name of the user that you want to describe.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'User'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DescribeUserResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DescribeUserResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the UserName parameter.
            The -PassThru parameter is deprecated, use -Select '^UserName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSUserGroupListCmdlet">
            <summary>
            Lists the Amazon QuickSight groups that an Amazon QuickSight user is a member of.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserGroupListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID that the user is in. Currently, you use the ID for the AWS account
            that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserGroupListCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserGroupListCmdlet.UserName">
            <summary>
            <para>
            <para>The Amazon QuickSight user name that you want to list group memberships for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserGroupListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to return from this request.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserGroupListCmdlet.NextToken">
            <summary>
            <para>
            <para>A pagination token that can be used in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserGroupListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'GroupList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListUserGroupsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListUserGroupsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserGroupListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the UserName parameter.
            The -PassThru parameter is deprecated, use -Select '^UserName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserGroupListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.GetQSUserListCmdlet">
            <summary>
            Returns a list of all of the Amazon QuickSight users belonging to this account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserListCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the user is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserListCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserListCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to return from this request.</para>
            </para>
            <para>
            <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
            <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
            <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
            </para>
            <para>If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'.</para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserListCmdlet.NextToken">
            <summary>
            <para>
            <para>A pagination token that can be used in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserListCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'UserList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.ListUsersResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.ListUsersResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserListCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.GetQSUserListCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSAccountCustomizationCmdlet">
            <summary>
            Creates Amazon QuickSight customizations the current AWS Region. Currently, you can
            add a custom default theme by using the <code>CreateAccountCustomization</code> or
            <code>UpdateAccountCustomization</code> API operation. To further customize QuickSight
            by removing QuickSight sample assets and videos for all new users, see <a href="https://docs.aws.amazon.com/quicksight/latest/user/customizing-quicksight.html">Customizing
            QuickSight</a> in the <i>Amazon QuickSight User Guide.</i><para>
            You can create customizations for your AWS account or, if you specify a namespace,
            for a QuickSight namespace instead. Customizations that apply to a namespace always
            override customizations that apply to an AWS account. To find out which customizations
            apply, use the <code>DescribeAccountCustomization</code> API operation.
            </para><para>
            Before you use the <code>CreateAccountCustomization</code> API operation to add a
            theme as the namespace default, make sure that you first share the theme with the
            namespace. If you don't share it with the namespace, the theme isn't visible to your
            users even if you make it the default theme. To check if the theme is shared, view
            the current permissions by using the <code><a>DescribeThemePermissions</a></code>
            API operation. To share the theme, grant permissions by using the <code><a>UpdateThemePermissions</a></code> API operation.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAccountCustomizationCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that you want to customize QuickSight for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAccountCustomizationCmdlet.AccountCustomization_DefaultTheme">
            <summary>
            <para>
            <para>The default theme for this QuickSight subscription.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAccountCustomizationCmdlet.Namespace">
            <summary>
            <para>
            <para>The QuickSight namespace that you want to add customizations to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAccountCustomizationCmdlet.Tag">
            <summary>
            <para>
            <para>A list of the tags that you want to attach to this resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAccountCustomizationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateAccountCustomizationResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateAccountCustomizationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAccountCustomizationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAccountCustomizationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet">
            <summary>
            Creates an analysis in Amazon QuickSight.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.AnalysisId">
            <summary>
            <para>
            <para>The ID for the analysis that you're creating. This ID displays in the URL of the analysis.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.SourceTemplate_Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the source template of an analysis.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account where you are creating an analysis.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.SourceTemplate_DataSetReference">
            <summary>
            <para>
            <para>The dataset references of the source template of an analysis.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.Parameters_DateTimeParameter">
            <summary>
            <para>
            <para>Date-time parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.Parameters_DecimalParameter">
            <summary>
            <para>
            <para>Decimal parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.Parameters_IntegerParameter">
            <summary>
            <para>
            <para>Integer parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.Name">
            <summary>
            <para>
            <para>A descriptive name for the analysis that you're creating. This name displays for the
            analysis in the QuickSight console. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.Permission">
            <summary>
            <para>
            <para>A structure that describes the principals and the resource-level permissions on an
            analysis. You can use the <code>Permissions</code> structure to grant permissions
            by providing a list of AWS Identity and Access Management (IAM) action information
            for each principal listed by Amazon Resource Name (ARN). </para><para>To specify no permissions, omit <code>Permissions</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.Parameters_StringParameter">
            <summary>
            <para>
            <para>String parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.Tag">
            <summary>
            <para>
            <para>Contains a map of the key-value pairs for the resource tag or tags assigned to the
            analysis.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.ThemeArn">
            <summary>
            <para>
            <para>The ARN for the theme to apply to the analysis that you're creating. To see the theme
            in the QuickSight console, make sure that you have access to it.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateAnalysisResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateAnalysisResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AnalysisId parameter.
            The -PassThru parameter is deprecated, use -Select '^AnalysisId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSAnalysisCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet">
            <summary>
            Creates a dashboard from a template. To first create a template, see the <code><a>CreateTemplate</a></code> API operation.
             
              
            <para>
            A dashboard is an entity in QuickSight that identifies QuickSight reports, created
            from analyses. You can share QuickSight dashboards. With the right permissions, you
            can create scheduled email reports from them. If you have the correct permissions,
            you can create a dashboard from a template that exists in a different AWS account.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.SourceTemplate_Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.AdHocFilteringOption_AvailabilityStatus">
            <summary>
            <para>
            <para>Availability status.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.ExportToCSVOption_AvailabilityStatus">
            <summary>
            <para>
            <para>Availability status.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account where you want to create the dashboard.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.DashboardId">
            <summary>
            <para>
            <para>The ID for the dashboard, also added to the IAM policy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.SourceTemplate_DataSetReference">
            <summary>
            <para>
            <para>Dataset references.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.Parameters_DateTimeParameter">
            <summary>
            <para>
            <para>Date-time parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.Parameters_DecimalParameter">
            <summary>
            <para>
            <para>Decimal parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.Parameters_IntegerParameter">
            <summary>
            <para>
            <para>Integer parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.Name">
            <summary>
            <para>
            <para>The display name of the dashboard.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.Permission">
            <summary>
            <para>
            <para>A structure that contains the permissions of the dashboard. You can use this structure
            for granting permissions by providing a list of IAM action information for each principal
            ARN. </para><para>To specify no permissions, omit the permissions list.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.Parameters_StringParameter">
            <summary>
            <para>
            <para>String parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.Tag">
            <summary>
            <para>
            <para>Contains a map of the key-value pairs for the resource tag or tags assigned to the
            dashboard.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.ThemeArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the theme that is being used for this dashboard.
            If you add a value for this field, it overrides the value that is used in the source
            entity. The theme ARN must exist in the same AWS account where you create the dashboard.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.VersionDescription">
            <summary>
            <para>
            <para>A description for the first version of the dashboard being created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.SheetControlsOption_VisibilityState">
            <summary>
            <para>
            <para>Visibility state.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateDashboardResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateDashboardResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DashboardId parameter.
            The -PassThru parameter is deprecated, use -Select '^DashboardId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDashboardCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet">
            <summary>
            Creates a dataset.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.RowLevelPermissionDataSet_Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the permission dataset.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.ColumnGroup">
            <summary>
            <para>
            <para>Groupings of columns that work together in certain QuickSight features. Currently,
            only geospatial hierarchy is supported.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.DataSetId">
            <summary>
            <para>
            <para>An ID for the dataset that you want to create. This ID is unique per AWS Region for
            each AWS account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.ImportMode">
            <summary>
            <para>
            <para>Indicates whether you want to import the data into SPICE.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.LogicalTableMap">
            <summary>
            <para>
            <para>Configures the combination and transformation of the data from the physical tables.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.Name">
            <summary>
            <para>
            <para>The display name for the dataset.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.RowLevelPermissionDataSet_Namespace">
            <summary>
            <para>
            <para>The namespace associated with the row-level permissions dataset.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.RowLevelPermissionDataSet_PermissionPolicy">
            <summary>
            <para>
            <para>Permission policy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.Permission">
            <summary>
            <para>
            <para>A list of resource permissions on the dataset.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.PhysicalTableMap">
            <summary>
            <para>
            <para>Declares the physical tables that are available in the underlying data sources.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.Tag">
            <summary>
            <para>
            <para>Contains a map of the key-value pairs for the resource tag or tags assigned to the
            dataset.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateDataSetResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateDataSetResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DataSetId parameter.
            The -PassThru parameter is deprecated, use -Select '^DataSetId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSetCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet">
            <summary>
            Creates a data source.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.CredentialPair_AlternateDataSourceParameter">
            <summary>
            <para>
            <para>A set of alternate data source parameters that you want to share for these credentials.
            The credentials are applied in tandem with the data source parameters when you copy
            a data source by using a create or update request. The API operation compares the
            <code>DataSourceParameters</code> structure that's in the request with the structures
            in the <code>AlternateDataSourceParameters</code> allow list. If the structures are
            an exact match, the request is allowed to use the new data source with the existing
            credentials. If the <code>AlternateDataSourceParameters</code> list is null, the <code>DataSourceParameters</code>
            originally used with these <code>Credentials</code> is automatically allowed.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.ManifestFileLocation_Bucket">
            <summary>
            <para>
            <para>Amazon S3 bucket.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.PrestoParameters_Catalog">
            <summary>
            <para>
            <para>Catalog.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.RedshiftParameters_ClusterId">
            <summary>
            <para>
            <para>Cluster ID. This field can be blank if the <code>Host</code> and <code>Port</code>
            are provided.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.Credentials_CopySourceArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of a data source that has the credential pair that
            you want to use. When <code>CopySourceArn</code> is not null, the credential pair
            from the data source in the ARN is used as the credentials for the <code>DataSourceCredentials</code>
            structure.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.AuroraParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.AuroraPostgreSqlParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.MariaDbParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.MySqlParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.PostgreSqlParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.RdsParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.RedshiftParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.SnowflakeParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.SqlServerParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.TeradataParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.AwsIotAnalyticsParameters_DataSetName">
            <summary>
            <para>
            <para>Dataset name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.DataSourceId">
            <summary>
            <para>
            <para>An ID for the data source. This ID is unique per AWS Region for each AWS account.
            </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.SslProperties_DisableSsl">
            <summary>
            <para>
            <para>A Boolean option to control whether SSL should be disabled.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.AmazonElasticsearchParameters_Domain">
            <summary>
            <para>
            <para>The Amazon Elasticsearch Service domain.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.AuroraParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.AuroraPostgreSqlParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.MariaDbParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.MySqlParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.PostgreSqlParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.PrestoParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.RedshiftParameters_Host">
            <summary>
            <para>
            <para>Host. This field can be blank if <code>ClusterId</code> is provided.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.SnowflakeParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.SparkParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.SqlServerParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.TeradataParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.RdsParameters_InstanceId">
            <summary>
            <para>
            <para>Instance ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.ManifestFileLocation_Key">
            <summary>
            <para>
            <para>Amazon S3 key that identifies an object.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.TwitterParameters_MaxRow">
            <summary>
            <para>
            <para>Maximum number of rows to query Twitter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.Name">
            <summary>
            <para>
            <para>A display name for the data source.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.CredentialPair_Password">
            <summary>
            <para>
            <para>Password.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.Permission">
            <summary>
            <para>
            <para>A list of resource permissions on the data source.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.AuroraParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.AuroraPostgreSqlParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.MariaDbParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.MySqlParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.PostgreSqlParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.PrestoParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.RedshiftParameters_Port">
            <summary>
            <para>
            <para>Port. This field can be blank if the <code>ClusterId</code> is provided.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.SparkParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.SqlServerParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.TeradataParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.TwitterParameters_Query">
            <summary>
            <para>
            <para>Twitter query string.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.JiraParameters_SiteBaseUrl">
            <summary>
            <para>
            <para>The base URL of the Jira site.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.ServiceNowParameters_SiteBaseUrl">
            <summary>
            <para>
            <para>URL of the base site.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.Tag">
            <summary>
            <para>
            <para>Contains a map of the key-value pairs for the resource tag or tags assigned to the
            data source.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.Type">
            <summary>
            <para>
            <para>The type of the data source. Currently, the supported types for this operation are:
            <code>ATHENA, AURORA, AURORA_POSTGRESQL, MARIADB, MYSQL, POSTGRESQL, PRESTO, REDSHIFT,
            S3, SNOWFLAKE, SPARK, SQLSERVER, TERADATA</code>. Use <code>ListDataSources</code>
            to return a list of all data sources.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.CredentialPair_Username">
            <summary>
            <para>
            <para>User name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.VpcConnectionProperties_VpcConnectionArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) for the VPC connection.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.SnowflakeParameters_Warehouse">
            <summary>
            <para>
            <para>Warehouse.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.AthenaParameters_WorkGroup">
            <summary>
            <para>
            <para>The workgroup that Amazon Athena uses.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateDataSourceResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateDataSourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DataSourceId parameter.
            The -PassThru parameter is deprecated, use -Select '^DataSourceId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSDataSourceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSGroupCmdlet">
            <summary>
            Creates an Amazon QuickSight group.
             
              
            <para>
            The permissions resource is <code>arn:aws:quicksight:us-east-1:<i>&lt;relevant-aws-account-id&gt;</i>:group/default/<i>&lt;group-name&gt;</i></code>.
            </para><para>
            The response is a group object.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the group is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupCmdlet.Description">
            <summary>
            <para>
            <para>A description for the group that you want to create.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupCmdlet.GroupName">
            <summary>
            <para>
            <para>A name for the group that you want to create.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Group'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateGroupResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateGroupResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the GroupName parameter.
            The -PassThru parameter is deprecated, use -Select '^GroupName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSGroupMembershipCmdlet">
            <summary>
            Adds an Amazon QuickSight user to an Amazon QuickSight group.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupMembershipCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the group is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupMembershipCmdlet.GroupName">
            <summary>
            <para>
            <para>The name of the group that you want to add the user to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupMembershipCmdlet.MemberName">
            <summary>
            <para>
            <para>The name of the user that you want to add to the group membership.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupMembershipCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupMembershipCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'GroupMember'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateGroupMembershipResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateGroupMembershipResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupMembershipCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the MemberName parameter.
            The -PassThru parameter is deprecated, use -Select '^MemberName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSGroupMembershipCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSIAMPolicyAssignmentCmdlet">
            <summary>
            Creates an assignment with one specified IAM policy, identified by its Amazon Resource
            Name (ARN). This policy will be assigned to specified groups or users of Amazon QuickSight.
            The users and groups need to be in the same namespace.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIAMPolicyAssignmentCmdlet.AssignmentName">
            <summary>
            <para>
            <para>The name of the assignment. It must be unique within an AWS account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIAMPolicyAssignmentCmdlet.AssignmentStatus">
            <summary>
            <para>
            <para>The status of the assignment. Possible values are as follows:</para><ul><li><para><code>ENABLED</code> - Anything specified in this assignment is used when creating
            the data source.</para></li><li><para><code>DISABLED</code> - This assignment isn't used when creating the data source.</para></li><li><para><code>DRAFT</code> - This assignment is an unfinished draft and isn't used when creating
            the data source.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIAMPolicyAssignmentCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account where you want to assign an IAM policy to QuickSight users
            or groups.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIAMPolicyAssignmentCmdlet.Identity">
            <summary>
            <para>
            <para>The QuickSight users, groups, or both that you want to assign the policy to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIAMPolicyAssignmentCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace that contains the assignment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIAMPolicyAssignmentCmdlet.PolicyArn">
            <summary>
            <para>
            <para>The ARN for the IAM policy to apply to the QuickSight users and groups specified in
            this assignment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIAMPolicyAssignmentCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateIAMPolicyAssignmentResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateIAMPolicyAssignmentResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIAMPolicyAssignmentCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AssignmentName parameter.
            The -PassThru parameter is deprecated, use -Select '^AssignmentName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIAMPolicyAssignmentCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSIngestionCmdlet">
            <summary>
            Creates and starts a new SPICE ingestion on a dataset
             
              
            <para>
            Any ingestions operating on tagged datasets inherit the same tags automatically for
            use in access control. For an example, see <a href="https://aws.amazon.com/premiumsupport/knowledge-center/iam-ec2-resource-tags/">How
            do I create an IAM policy to control access to Amazon EC2 resources using tags?</a>
            in the AWS Knowledge Center. Tags are visible on the tagged dataset, but not on the
            ingestion resource.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIngestionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIngestionCmdlet.DataSetId">
            <summary>
            <para>
            <para>The ID of the dataset used in the ingestion.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIngestionCmdlet.IngestionId">
            <summary>
            <para>
            <para>An ID for the ingestion.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIngestionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateIngestionResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateIngestionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIngestionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the IngestionId parameter.
            The -PassThru parameter is deprecated, use -Select '^IngestionId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSIngestionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSNamespaceCmdlet">
            <summary>
            (Enterprise edition only) Creates a new namespace for you to use with Amazon QuickSight.
             
              
            <para>
            A namespace allows you to isolate the QuickSight users and groups that are registered
            for that namespace. Users that access the namespace can share assets only with other
            users or groups in the same namespace. They can't see users and groups in other namespaces.
            You can create a namespace after your AWS account is subscribed to QuickSight. The
            namespace must be unique within the AWS account. By default, there is a limit of 100
            namespaces per AWS account. To increase your limit, create a ticket with AWS Support.
             
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSNamespaceCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that you want to create the QuickSight namespace in.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSNamespaceCmdlet.IdentityStore">
            <summary>
            <para>
            <para>Specifies the type of your user identity directory. Currently, this supports users
            with an identity type of <code>QUICKSIGHT</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSNamespaceCmdlet.Namespace">
            <summary>
            <para>
            <para>The name that you want to use to describe the new namespace.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSNamespaceCmdlet.Tag">
            <summary>
            <para>
            <para>The tags that you want to associate with the namespace that you're creating.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSNamespaceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateNamespaceResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateNamespaceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSNamespaceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Namespace parameter.
            The -PassThru parameter is deprecated, use -Select '^Namespace' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSNamespaceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateCmdlet">
            <summary>
            Creates a template from an existing QuickSight analysis or template. You can use the
            resulting template to create a dashboard.
             
              
            <para>
            A <i>template</i> is an entity in QuickSight that encapsulates the metadata required
            to create an analysis and that you can use to create s dashboard. A template adds
            a layer of abstraction by using placeholders to replace the dataset associated with
            the analysis. You can use templates to create dashboards by replacing dataset placeholders
            with datasets that follow the same schema that was used to create the source analysis
            and template.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateCmdlet.SourceAnalysis_Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateCmdlet.SourceTemplate_Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the group is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateCmdlet.SourceAnalysis_DataSetReference">
            <summary>
            <para>
            <para>A structure containing information about the dataset references used as placeholders
            in the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateCmdlet.Name">
            <summary>
            <para>
            <para>A display name for the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateCmdlet.Permission">
            <summary>
            <para>
            <para>A list of resource permissions to be set on the template. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateCmdlet.Tag">
            <summary>
            <para>
            <para>Contains a map of the key-value pairs for the resource tag or tags assigned to the
            resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateCmdlet.TemplateId">
            <summary>
            <para>
            <para>An ID for the template that you want to create. This template is unique per AWS Region
            in each AWS account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateCmdlet.VersionDescription">
            <summary>
            <para>
            <para>A description of the current template version being created. This API operation creates
            the first version of the template. Every time <code>UpdateTemplate</code> is called,
            a new version is created. Each version of the template maintains a description of
            the version in the <code>VersionDescription</code> field.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateTemplateResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateTemplateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^TemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateAliasCmdlet">
            <summary>
            Creates a template alias for a template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateAliasCmdlet.AliasName">
            <summary>
            <para>
            <para>The name that you want to give to the template alias that you're creating. Don't start
            the alias name with the <code>$</code> character. Alias names that start with <code>$</code>
            are reserved by QuickSight. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateAliasCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the template that you creating an alias for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateAliasCmdlet.TemplateId">
            <summary>
            <para>
            <para>An ID for the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateAliasCmdlet.TemplateVersionNumber">
            <summary>
            <para>
            <para>The version number of the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateAliasCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TemplateAlias'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateTemplateAliasResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateTemplateAliasResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateAliasCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AliasName parameter.
            The -PassThru parameter is deprecated, use -Select '^AliasName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSTemplateAliasCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet">
            <summary>
            Creates a theme.
             
              
            <para>
            A <i>theme</i> is set of configuration options for color and layout. Themes apply
            to analyses and dashboards. For more information, see <a href="https://docs.aws.amazon.com/quicksight/latest/user/themes-in-quicksight.html">Using
            Themes in Amazon QuickSight</a> in the <i>Amazon QuickSight User Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_Accent">
            <summary>
            <para>
            <para>This color is that applies to selected states and buttons.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_AccentForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any text or other elements that appear over the
            accent color.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account where you want to store the new theme. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.BaseThemeId">
            <summary>
            <para>
            <para>The ID of the theme that a custom theme will inherit from. All themes inherit from
            one of the starting themes defined by Amazon QuickSight. For a list of the starting
            themes, use <code>ListThemes</code> or choose <b>Themes</b> from within a QuickSight
            analysis. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.DataColorPalette_Color">
            <summary>
            <para>
            <para>The hexadecimal codes for the colors.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_Danger">
            <summary>
            <para>
            <para>The color that applies to error messages.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_DangerForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any text or other elements that appear over the
            error color.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_Dimension">
            <summary>
            <para>
            <para>The color that applies to the names of fields that are identified as dimensions.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_DimensionForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any text or other elements that appear over the
            dimension color.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.DataColorPalette_EmptyFillColor">
            <summary>
            <para>
            <para>The hexadecimal code of a color that applies to charts where a lack of data is highlighted.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_Measure">
            <summary>
            <para>
            <para>The color that applies to the names of fields that are identified as measures.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_MeasureForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any text or other elements that appear over the
            measure color.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.DataColorPalette_MinMaxGradient">
            <summary>
            <para>
            <para>The minimum and maximum hexadecimal codes that describe a color gradient. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.Name">
            <summary>
            <para>
            <para>A display name for the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.Permission">
            <summary>
            <para>
            <para>A valid grouping of resource permissions to apply to the new theme. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_PrimaryBackground">
            <summary>
            <para>
            <para>The background color that applies to visuals and other high emphasis UI.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_PrimaryForeground">
            <summary>
            <para>
            <para>The color of text and other foreground elements that appear over the primary background
            regions, such as grid lines, borders, table banding, icons, and so on.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_SecondaryBackground">
            <summary>
            <para>
            <para>The background color that applies to the sheet background and sheet controls.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_SecondaryForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any sheet title, sheet control text, or UI that
            appears over the secondary background.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.Border_Show">
            <summary>
            <para>
            <para>The option to enable display of borders for visuals.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.Gutter_Show">
            <summary>
            <para>
            <para>This Boolean value controls whether to display a gutter space between sheet tiles.
            </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.Margin_Show">
            <summary>
            <para>
            <para>This Boolean value controls whether to display sheet margins.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_Success">
            <summary>
            <para>
            <para>The color that applies to success messages, for example the check mark for a successful
            download.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_SuccessForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any text or other elements that appear over the
            success color.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.Tag">
            <summary>
            <para>
            <para>A map of the key-value pairs for the resource tag or tags that you want to add to
            the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.ThemeId">
            <summary>
            <para>
            <para>An ID for the theme that you want to create. The theme ID is unique per AWS Region
            in each AWS account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.VersionDescription">
            <summary>
            <para>
            <para>A description of the first version of the theme that you're creating. Every time <code>UpdateTheme</code>
            is called, a new version is created. Each version of the theme has a description of
            the version in the <code>VersionDescription</code> field.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_Warning">
            <summary>
            <para>
            <para>This color that applies to warning and informational messages.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.UIColorPalette_WarningForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any text or other elements that appear over the
            warning color.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateThemeResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateThemeResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ThemeId parameter.
            The -PassThru parameter is deprecated, use -Select '^ThemeId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.NewQSThemeAliasCmdlet">
            <summary>
            Creates a theme alias for a theme.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeAliasCmdlet.AliasName">
            <summary>
            <para>
            <para>The name that you want to give to the theme alias that you are creating. The alias
            name can't begin with a <code>$</code>. Alias names that start with <code>$</code>
            are reserved by Amazon QuickSight. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeAliasCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the theme for the new theme alias.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeAliasCmdlet.ThemeId">
            <summary>
            <para>
            <para>An ID for the theme alias.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeAliasCmdlet.ThemeVersionNumber">
            <summary>
            <para>
            <para>The version number of the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeAliasCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ThemeAlias'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CreateThemeAliasResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CreateThemeAliasResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeAliasCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ThemeId parameter.
            The -PassThru parameter is deprecated, use -Select '^ThemeId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.NewQSThemeAliasCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RegisterQSUserCmdlet">
            <summary>
            Creates an Amazon QuickSight user, whose identity is associated with the AWS Identity
            and Access Management (IAM) identity or role specified in the request.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RegisterQSUserCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the user is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RegisterQSUserCmdlet.CustomPermissionsName">
            <summary>
            <para>
            <para>(Enterprise edition only) The name of the custom permissions profile that you want
            to assign to this user. Customized permissions allows you to control a user's access
            by restricting access the following operations:</para><ul><li><para>Create and update data sources</para></li><li><para>Create and update datasets</para></li><li><para>Create and update email reports</para></li><li><para>Subscribe to email reports</para></li></ul><para>To add custom permissions to an existing user, use <code><a>UpdateUser</a></code>
            instead.</para><para>A set of custom permissions includes any combination of these restrictions. Currently,
            you need to create the profile names for custom permission sets by using the QuickSight
            console. Then, you use the <code>RegisterUser</code> API operation to assign the named
            set of permissions to a QuickSight user. </para><para>QuickSight custom permissions are applied through IAM policies. Therefore, they override
            the permissions typically granted by assigning QuickSight users to one of the default
            security cohorts in QuickSight (admin, author, reader).</para><para>This feature is available only to QuickSight Enterprise edition subscriptions that
            use SAML 2.0-Based Federation for Single Sign-On (SSO).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RegisterQSUserCmdlet.Email">
            <summary>
            <para>
            <para>The email address of the user that you want to register.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RegisterQSUserCmdlet.IamArn">
            <summary>
            <para>
            <para>The ARN of the IAM user or role that you are registering with Amazon QuickSight. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RegisterQSUserCmdlet.IdentityType">
            <summary>
            <para>
            <para>Amazon QuickSight supports several ways of managing the identity of users. This parameter
            accepts two values:</para><ul><li><para><code>IAM</code>: A user whose identity maps to an existing IAM user or role. </para></li><li><para><code>QUICKSIGHT</code>: A user whose identity is owned and managed internally by
            Amazon QuickSight. </para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RegisterQSUserCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RegisterQSUserCmdlet.SessionName">
            <summary>
            <para>
            <para>You need to use this parameter only when you register one or more users using an assumed
            IAM role. You don't need to provide the session name for other scenarios, for example
            when you are registering an IAM user or an Amazon QuickSight user. You can register
            multiple users using the same IAM role if each user has a different session name.
            For more information on assuming IAM roles, see <a href="https://awscli.amazonaws.com/v2/documentation/api/latest/reference/sts/assume-role.html"><code>assume-role</code></a> in the <i>AWS CLI Reference.</i></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RegisterQSUserCmdlet.UserName">
            <summary>
            <para>
            <para>The Amazon QuickSight user name that you want to create for the user you are registering.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RegisterQSUserCmdlet.UserRole">
            <summary>
            <para>
            <para>The Amazon QuickSight role for the user. The user role can be one of the following:</para><ul><li><para><code>READER</code>: A user who has read-only access to dashboards.</para></li><li><para><code>AUTHOR</code>: A user who can create data sources, datasets, analyses, and
            dashboards.</para></li><li><para><code>ADMIN</code>: A user who is an author, who can also manage Amazon QuickSight
            settings.</para></li><li><para><code>RESTRICTED_READER</code>: This role isn't currently available for use.</para></li><li><para><code>RESTRICTED_AUTHOR</code>: This role isn't currently available for use.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RegisterQSUserCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.RegisterUserResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.RegisterUserResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RegisterQSUserCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Email parameter.
            The -PassThru parameter is deprecated, use -Select '^Email' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RegisterQSUserCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSAccountCustomizationCmdlet">
            <summary>
            Deletes all Amazon QuickSight customizations in this AWS Region for the specified
            AWS account and QuickSight namespace.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSAccountCustomizationCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that you want to delete QuickSight customizations from
            in this AWS Region.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSAccountCustomizationCmdlet.Namespace">
            <summary>
            <para>
            <para>The QuickSight namespace that you're deleting the customizations from.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSAccountCustomizationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteAccountCustomizationResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteAccountCustomizationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSAccountCustomizationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSAccountCustomizationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSAnalysisCmdlet">
            <summary>
            Deletes an analysis from Amazon QuickSight. You can optionally include a recovery
            window during which you can restore the analysis. If you don't specify a recovery
            window value, the operation defaults to 30 days. QuickSight attaches a <code>DeletionTime</code>
            stamp to the response that specifies the end of the recovery window. At the end of
            the recovery window, QuickSight deletes the analysis permanently.
             
              
            <para>
            At any time before recovery window ends, you can use the <code>RestoreAnalysis</code>
            API operation to remove the <code>DeletionTime</code> stamp and cancel the deletion
            of the analysis. The analysis remains visible in the API until it's deleted, so you
            can describe it but you can't make a template from it.
            </para><para>
            An analysis that's scheduled for deletion isn't accessible in the QuickSight console.
            To access it in the console, restore it. Deleting an analysis doesn't delete the dashboards
            that you publish from it.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSAnalysisCmdlet.AnalysisId">
            <summary>
            <para>
            <para>The ID of the analysis that you're deleting.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSAnalysisCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account where you want to delete an analysis.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSAnalysisCmdlet.ForceDeleteWithoutRecovery">
            <summary>
            <para>
            <para>This option defaults to the value <code>NoForceDeleteWithoutRecovery</code>. To immediately
            delete the analysis, add the <code>ForceDeleteWithoutRecovery</code> option. You can't
            restore an analysis after it's deleted. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSAnalysisCmdlet.RecoveryWindowInDay">
            <summary>
            <para>
            <para>A value that specifies the number of days that QuickSight waits before it deletes
            the analysis. You can't use this parameter with the <code>ForceDeleteWithoutRecovery</code>
            option in the same API call. The default value is 30.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSAnalysisCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteAnalysisResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteAnalysisResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSAnalysisCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AnalysisId parameter.
            The -PassThru parameter is deprecated, use -Select '^AnalysisId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSAnalysisCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSDashboardCmdlet">
            <summary>
            Deletes a dashboard.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDashboardCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the dashboard that you're deleting.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDashboardCmdlet.DashboardId">
            <summary>
            <para>
            <para>The ID for the dashboard.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDashboardCmdlet.VersionNumber">
            <summary>
            <para>
            <para>The version number of the dashboard. If the version number property is provided, only
            the specified version of the dashboard is deleted.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDashboardCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteDashboardResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteDashboardResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDashboardCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DashboardId parameter.
            The -PassThru parameter is deprecated, use -Select '^DashboardId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDashboardCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSDataSetCmdlet">
            <summary>
            Deletes a dataset.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDataSetCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDataSetCmdlet.DataSetId">
            <summary>
            <para>
            <para>The ID for the dataset that you want to create. This ID is unique per AWS Region for
            each AWS account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDataSetCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteDataSetResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteDataSetResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDataSetCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DataSetId parameter.
            The -PassThru parameter is deprecated, use -Select '^DataSetId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDataSetCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSDataSourceCmdlet">
            <summary>
            Deletes the data source permanently. This operation breaks all the datasets that reference
            the deleted data source.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDataSourceCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDataSourceCmdlet.DataSourceId">
            <summary>
            <para>
            <para>The ID of the data source. This ID is unique per AWS Region for each AWS account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDataSourceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteDataSourceResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteDataSourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDataSourceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DataSourceId parameter.
            The -PassThru parameter is deprecated, use -Select '^DataSourceId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSDataSourceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupCmdlet">
            <summary>
            Removes a user group from Amazon QuickSight.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the group is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupCmdlet.GroupName">
            <summary>
            <para>
            <para>The name of the group that you want to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteGroupResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteGroupResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the GroupName parameter.
            The -PassThru parameter is deprecated, use -Select '^GroupName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupMembershipCmdlet">
            <summary>
            Removes a user from a group so that the user is no longer a member of the group.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupMembershipCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the group is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupMembershipCmdlet.GroupName">
            <summary>
            <para>
            <para>The name of the group that you want to delete the user from.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupMembershipCmdlet.MemberName">
            <summary>
            <para>
            <para>The name of the user that you want to delete from the group membership.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupMembershipCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupMembershipCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteGroupMembershipResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteGroupMembershipResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupMembershipCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the MemberName parameter.
            The -PassThru parameter is deprecated, use -Select '^MemberName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSGroupMembershipCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSIAMPolicyAssignmentCmdlet">
            <summary>
            Deletes an existing IAM policy assignment.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSIAMPolicyAssignmentCmdlet.AssignmentName">
            <summary>
            <para>
            <para>The name of the assignment. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSIAMPolicyAssignmentCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID where you want to delete the IAM policy assignment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSIAMPolicyAssignmentCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace that contains the assignment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSIAMPolicyAssignmentCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'AssignmentName'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteIAMPolicyAssignmentResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteIAMPolicyAssignmentResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSIAMPolicyAssignmentCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AssignmentName parameter.
            The -PassThru parameter is deprecated, use -Select '^AssignmentName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSIAMPolicyAssignmentCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSNamespaceCmdlet">
            <summary>
            Deletes a namespace and the users and groups that are associated with the namespace.
            This is an asynchronous process. Assets including dashboards, analyses, datasets and
            data sources are not deleted. To delete these assets, you use the API operations for
            the relevant asset.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSNamespaceCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that you want to delete the QuickSight namespace from.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSNamespaceCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace that you want to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSNamespaceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteNamespaceResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteNamespaceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSNamespaceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the Namespace parameter.
            The -PassThru parameter is deprecated, use -Select '^Namespace' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSNamespaceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSResourceTagCmdlet">
            <summary>
            Removes a tag or tags from a resource.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSResourceTagCmdlet.ResourceArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource that you want to untag.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSResourceTagCmdlet.TagKey">
            <summary>
            <para>
            <para>The keys of the key-value pairs for the resource tag or tags assigned to the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UntagResourceResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UntagResourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ResourceArn parameter.
            The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateCmdlet">
            <summary>
            Deletes a template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the template that you're deleting.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateCmdlet.TemplateId">
            <summary>
            <para>
            <para>An ID for the template you want to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateCmdlet.VersionNumber">
            <summary>
            <para>
            <para>Specifies the version of the template that you want to delete. If you don't provide
            a version number, <code>DeleteTemplate</code> deletes all versions of the template.
            </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteTemplateResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteTemplateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^TemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateAliasCmdlet">
            <summary>
            Deletes the item that the specified template alias points to. If you provide a specific
            alias, you delete the version of the template that the alias points to.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateAliasCmdlet.AliasName">
            <summary>
            <para>
            <para>The name for the template alias. To delete a specific alias, you delete the version
            that the alias points to. You can specify the alias name, or specify the latest version
            of the template by providing the keyword <code>$LATEST</code> in the <code>AliasName</code>
            parameter. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateAliasCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the item to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateAliasCmdlet.TemplateId">
            <summary>
            <para>
            <para>The ID for the template that the specified alias is for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateAliasCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteTemplateAliasResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteTemplateAliasResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateAliasCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AliasName parameter.
            The -PassThru parameter is deprecated, use -Select '^AliasName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSTemplateAliasCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeCmdlet">
            <summary>
            Deletes a theme.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the theme that you're deleting.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeCmdlet.ThemeId">
            <summary>
            <para>
            <para>An ID for the theme that you want to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeCmdlet.VersionNumber">
            <summary>
            <para>
            <para>The version of the theme that you want to delete. </para><para><b>Note:</b> If you don't provide a version number, you're using this call to <code>DeleteTheme</code>
            to delete all versions of the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteThemeResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteThemeResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ThemeId parameter.
            The -PassThru parameter is deprecated, use -Select '^ThemeId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeAliasCmdlet">
            <summary>
            Deletes the version of the theme that the specified theme alias points to. If you
            provide a specific alias, you delete the version of the theme that the alias points
            to.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeAliasCmdlet.AliasName">
            <summary>
            <para>
            <para>The unique name for the theme alias to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeAliasCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the theme alias to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeAliasCmdlet.ThemeId">
            <summary>
            <para>
            <para>The ID for the theme that the specified alias is for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeAliasCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteThemeAliasResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteThemeAliasResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeAliasCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ThemeId parameter.
            The -PassThru parameter is deprecated, use -Select '^ThemeId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSThemeAliasCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserCmdlet">
            <summary>
            Deletes the Amazon QuickSight user that is associated with the identity of the AWS
            Identity and Access Management (IAM) user or role that's making the call. The IAM
            user isn't deleted as a result of this call.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the user is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserCmdlet.UserName">
            <summary>
            <para>
            <para>The name of the user that you want to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteUserResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteUserResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the UserName parameter.
            The -PassThru parameter is deprecated, use -Select '^UserName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserByPrincipalIdCmdlet">
            <summary>
            Deletes a user identified by its principal ID.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserByPrincipalIdCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the user is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserByPrincipalIdCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserByPrincipalIdCmdlet.PrincipalId">
            <summary>
            <para>
            <para>The principal ID of the user.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserByPrincipalIdCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.DeleteUserByPrincipalIdResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.DeleteUserByPrincipalIdResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserByPrincipalIdCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the PrincipalId parameter.
            The -PassThru parameter is deprecated, use -Select '^PrincipalId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RemoveQSUserByPrincipalIdCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.RestoreQSAnalysisCmdlet">
            <summary>
            Restores an analysis.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RestoreQSAnalysisCmdlet.AnalysisId">
            <summary>
            <para>
            <para>The ID of the analysis that you're restoring.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RestoreQSAnalysisCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the analysis.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RestoreQSAnalysisCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.RestoreAnalysisResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.RestoreAnalysisResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RestoreQSAnalysisCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AnalysisId parameter.
            The -PassThru parameter is deprecated, use -Select '^AnalysisId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.RestoreQSAnalysisCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.SearchQSAnalysisCmdlet">
            <summary>
            Searches for analyses that belong to the user specified in the filter.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSAnalysisCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the analyses that you're searching for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSAnalysisCmdlet.Filter">
            <summary>
            <para>
            <para>The structure for the search filters that you want to apply to your search. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSAnalysisCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to return.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSAnalysisCmdlet.NextToken">
            <summary>
            <para>
            <para>A pagination token that can be used in a subsequent request.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSAnalysisCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'AnalysisSummaryList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.SearchAnalysesResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.SearchAnalysesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSAnalysisCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSAnalysisCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSAnalysisCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.SearchQSDashboardCmdlet">
            <summary>
            Searches for dashboards that belong to a user.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSDashboardCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the user whose dashboards you're searching
            for. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSDashboardCmdlet.Filter">
            <summary>
            <para>
            <para>The filters to apply to the search. Currently, you can search only by user name, for
            example, <code>"Filters": [ { "Name": "QUICKSIGHT_USER", "Operator": "StringEquals",
            "Value": "arn:aws:quicksight:us-east-1:1:user/default/UserName1" } ]</code></para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSDashboardCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to be returned per request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSDashboardCmdlet.NextToken">
            <summary>
            <para>
            <para>The token for the next set of results, or null if there are no more results.</para>
            </para>
            <para>
            <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call.
            <br/>In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSDashboardCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'DashboardSummaryList'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.SearchDashboardsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.SearchDashboardsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSDashboardCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSDashboardCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.SearchQSDashboardCmdlet.NoAutoIteration">
            <summary>
            By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple
            service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken
            as the start point.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.StopQSIngestionCmdlet">
            <summary>
            Cancels an ongoing ingestion of data into SPICE.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.StopQSIngestionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.StopQSIngestionCmdlet.DataSetId">
            <summary>
            <para>
            <para>The ID of the dataset used in the ingestion.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.StopQSIngestionCmdlet.IngestionId">
            <summary>
            <para>
            <para>An ID for the ingestion.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.StopQSIngestionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.CancelIngestionResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.CancelIngestionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.StopQSIngestionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the IngestionId parameter.
            The -PassThru parameter is deprecated, use -Select '^IngestionId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.StopQSIngestionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountCustomizationCmdlet">
            <summary>
            Updates Amazon QuickSight customizations the current AWS Region. Currently, the only
            customization you can use is a theme.
             
              
            <para>
            You can use customizations for your AWS account or, if you specify a namespace, for
            a QuickSight namespace instead. Customizations that apply to a namespace override
            customizations that apply to an AWS account. To find out which customizations apply,
            use the <code>DescribeAccountCustomization</code> API operation.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountCustomizationCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that you want to update QuickSight customizations for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountCustomizationCmdlet.AccountCustomization_DefaultTheme">
            <summary>
            <para>
            <para>The default theme for this QuickSight subscription.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountCustomizationCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace that you want to update QuickSight customizations for.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountCustomizationCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateAccountCustomizationResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateAccountCustomizationResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountCustomizationCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountCustomizationCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountSettingCmdlet">
            <summary>
            Updates the Amazon QuickSight settings in your AWS account.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountSettingCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that contains the QuickSight settings that you want to
            list.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountSettingCmdlet.DefaultNamespace">
            <summary>
            <para>
            <para>The default namespace for this AWS account. Currently, the default is <code>default</code>.
            AWS Identity and Access Management (IAM) users that register for the first time with
            QuickSight provide an email that becomes associated with the default namespace.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountSettingCmdlet.NotificationEmail">
            <summary>
            <para>
            <para>The email address that you want QuickSight to send notifications to regarding your
            AWS account or QuickSight subscription.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountSettingCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateAccountSettingsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateAccountSettingsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountSettingCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAccountSettingCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet">
            <summary>
            Updates an analysis in Amazon QuickSight
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet.AnalysisId">
            <summary>
            <para>
            <para>The ID for the analysis that you're updating. This ID displays in the URL of the analysis.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet.SourceTemplate_Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the source template of an analysis.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the analysis that you're updating.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet.SourceTemplate_DataSetReference">
            <summary>
            <para>
            <para>The dataset references of the source template of an analysis.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet.Parameters_DateTimeParameter">
            <summary>
            <para>
            <para>Date-time parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet.Parameters_DecimalParameter">
            <summary>
            <para>
            <para>Decimal parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet.Parameters_IntegerParameter">
            <summary>
            <para>
            <para>Integer parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet.Name">
            <summary>
            <para>
            <para>A descriptive name for the analysis that you're updating. This name displays for the
            analysis in the QuickSight console.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet.Parameters_StringParameter">
            <summary>
            <para>
            <para>String parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet.ThemeArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) for the theme to apply to the analysis that you're
            creating. To see the theme in the QuickSight console, make sure that you have access
            to it.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateAnalysisResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateAnalysisResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AnalysisId parameter.
            The -PassThru parameter is deprecated, use -Select '^AnalysisId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisPermissionCmdlet">
            <summary>
            Updates the read and write permissions for an analysis.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisPermissionCmdlet.AnalysisId">
            <summary>
            <para>
            <para>The ID of the analysis whose permissions you're updating. The ID is part of the analysis
            URL.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisPermissionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the analysis whose permissions you're updating.
            You must be using the AWS account that the analysis is in.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisPermissionCmdlet.GrantPermission">
            <summary>
            <para>
            <para>A structure that describes the permissions to add and the principal to add them to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisPermissionCmdlet.RevokePermission">
            <summary>
            <para>
            <para>A structure that describes the permissions to remove and the principal to remove them
            from.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisPermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateAnalysisPermissionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateAnalysisPermissionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisPermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AnalysisId parameter.
            The -PassThru parameter is deprecated, use -Select '^AnalysisId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSAnalysisPermissionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet">
            <summary>
            Updates a dashboard in an AWS account.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.SourceTemplate_Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.AdHocFilteringOption_AvailabilityStatus">
            <summary>
            <para>
            <para>Availability status.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.ExportToCSVOption_AvailabilityStatus">
            <summary>
            <para>
            <para>Availability status.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the dashboard that you're updating.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.DashboardId">
            <summary>
            <para>
            <para>The ID for the dashboard.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.SourceTemplate_DataSetReference">
            <summary>
            <para>
            <para>Dataset references.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.Parameters_DateTimeParameter">
            <summary>
            <para>
            <para>Date-time parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.Parameters_DecimalParameter">
            <summary>
            <para>
            <para>Decimal parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.Parameters_IntegerParameter">
            <summary>
            <para>
            <para>Integer parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.Name">
            <summary>
            <para>
            <para>The display name of the dashboard.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.Parameters_StringParameter">
            <summary>
            <para>
            <para>String parameters.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.ThemeArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the theme that is being used for this dashboard.
            If you add a value for this field, it overrides the value that was originally associated
            with the entity. The theme ARN must exist in the same AWS account where you create
            the dashboard.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.VersionDescription">
            <summary>
            <para>
            <para>A description for the first version of the dashboard being created.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.SheetControlsOption_VisibilityState">
            <summary>
            <para>
            <para>Visibility state.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateDashboardResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateDashboardResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPermissionCmdlet">
            <summary>
            Updates read and write permissions on a dashboard.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPermissionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the dashboard whose permissions you're updating.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPermissionCmdlet.DashboardId">
            <summary>
            <para>
            <para>The ID for the dashboard.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPermissionCmdlet.GrantPermission">
            <summary>
            <para>
            <para>The permissions that you want to grant on this resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPermissionCmdlet.RevokePermission">
            <summary>
            <para>
            <para>The permissions that you want to revoke from this resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateDashboardPermissionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateDashboardPermissionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPermissionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPublishedVersionCmdlet">
            <summary>
            Updates the published version of a dashboard.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPublishedVersionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the dashboard that you're updating.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPublishedVersionCmdlet.DashboardId">
            <summary>
            <para>
            <para>The ID for the dashboard.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPublishedVersionCmdlet.VersionNumber">
            <summary>
            <para>
            <para>The version number of the dashboard.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPublishedVersionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateDashboardPublishedVersionResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateDashboardPublishedVersionResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPublishedVersionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AwsAccountId parameter.
            The -PassThru parameter is deprecated, use -Select '^AwsAccountId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDashboardPublishedVersionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet">
            <summary>
            Updates a dataset.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet.RowLevelPermissionDataSet_Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the permission dataset.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet.ColumnGroup">
            <summary>
            <para>
            <para>Groupings of columns that work together in certain QuickSight features. Currently,
            only geospatial hierarchy is supported.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet.DataSetId">
            <summary>
            <para>
            <para>The ID for the dataset that you want to update. This ID is unique per AWS Region for
            each AWS account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet.ImportMode">
            <summary>
            <para>
            <para>Indicates whether you want to import the data into SPICE.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet.LogicalTableMap">
            <summary>
            <para>
            <para>Configures the combination and transformation of the data from the physical tables.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet.Name">
            <summary>
            <para>
            <para>The display name for the dataset.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet.RowLevelPermissionDataSet_Namespace">
            <summary>
            <para>
            <para>The namespace associated with the row-level permissions dataset.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet.RowLevelPermissionDataSet_PermissionPolicy">
            <summary>
            <para>
            <para>Permission policy.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet.PhysicalTableMap">
            <summary>
            <para>
            <para>Declares the physical tables that are available in the underlying data sources.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateDataSetResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateDataSetResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DataSetId parameter.
            The -PassThru parameter is deprecated, use -Select '^DataSetId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetPermissionCmdlet">
            <summary>
            Updates the permissions on a dataset.
             
              
            <para>
            The permissions resource is <code>arn:aws:quicksight:region:aws-account-id:dataset/data-set-id</code>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetPermissionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetPermissionCmdlet.DataSetId">
            <summary>
            <para>
            <para>The ID for the dataset whose permissions you want to update. This ID is unique per
            AWS Region for each AWS account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetPermissionCmdlet.GrantPermission">
            <summary>
            <para>
            <para>The resource permissions that you want to grant to the dataset.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetPermissionCmdlet.RevokePermission">
            <summary>
            <para>
            <para>The resource permissions that you want to revoke from the dataset.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetPermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateDataSetPermissionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateDataSetPermissionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetPermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DataSetId parameter.
            The -PassThru parameter is deprecated, use -Select '^DataSetId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSetPermissionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet">
            <summary>
            Updates a data source.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.CredentialPair_AlternateDataSourceParameter">
            <summary>
            <para>
            <para>A set of alternate data source parameters that you want to share for these credentials.
            The credentials are applied in tandem with the data source parameters when you copy
            a data source by using a create or update request. The API operation compares the
            <code>DataSourceParameters</code> structure that's in the request with the structures
            in the <code>AlternateDataSourceParameters</code> allow list. If the structures are
            an exact match, the request is allowed to use the new data source with the existing
            credentials. If the <code>AlternateDataSourceParameters</code> list is null, the <code>DataSourceParameters</code>
            originally used with these <code>Credentials</code> is automatically allowed.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.ManifestFileLocation_Bucket">
            <summary>
            <para>
            <para>Amazon S3 bucket.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.PrestoParameters_Catalog">
            <summary>
            <para>
            <para>Catalog.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.RedshiftParameters_ClusterId">
            <summary>
            <para>
            <para>Cluster ID. This field can be blank if the <code>Host</code> and <code>Port</code>
            are provided.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.Credentials_CopySourceArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of a data source that has the credential pair that
            you want to use. When <code>CopySourceArn</code> is not null, the credential pair
            from the data source in the ARN is used as the credentials for the <code>DataSourceCredentials</code>
            structure.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.AuroraParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.AuroraPostgreSqlParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.MariaDbParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.MySqlParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.PostgreSqlParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.RdsParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.RedshiftParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.SnowflakeParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.SqlServerParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.TeradataParameters_Database">
            <summary>
            <para>
            <para>Database.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.AwsIotAnalyticsParameters_DataSetName">
            <summary>
            <para>
            <para>Dataset name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.DataSourceId">
            <summary>
            <para>
            <para>The ID of the data source. This ID is unique per AWS Region for each AWS account.
            </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.SslProperties_DisableSsl">
            <summary>
            <para>
            <para>A Boolean option to control whether SSL should be disabled.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.AmazonElasticsearchParameters_Domain">
            <summary>
            <para>
            <para>The Amazon Elasticsearch Service domain.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.AuroraParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.AuroraPostgreSqlParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.MariaDbParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.MySqlParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.PostgreSqlParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.PrestoParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.RedshiftParameters_Host">
            <summary>
            <para>
            <para>Host. This field can be blank if <code>ClusterId</code> is provided.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.SnowflakeParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.SparkParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.SqlServerParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.TeradataParameters_Host">
            <summary>
            <para>
            <para>Host.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.RdsParameters_InstanceId">
            <summary>
            <para>
            <para>Instance ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.ManifestFileLocation_Key">
            <summary>
            <para>
            <para>Amazon S3 key that identifies an object.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.TwitterParameters_MaxRow">
            <summary>
            <para>
            <para>Maximum number of rows to query Twitter.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.Name">
            <summary>
            <para>
            <para>A display name for the data source.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.CredentialPair_Password">
            <summary>
            <para>
            <para>Password.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.AuroraParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.AuroraPostgreSqlParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.MariaDbParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.MySqlParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.PostgreSqlParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.PrestoParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.RedshiftParameters_Port">
            <summary>
            <para>
            <para>Port. This field can be blank if the <code>ClusterId</code> is provided.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.SparkParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.SqlServerParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.TeradataParameters_Port">
            <summary>
            <para>
            <para>Port.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.TwitterParameters_Query">
            <summary>
            <para>
            <para>Twitter query string.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.JiraParameters_SiteBaseUrl">
            <summary>
            <para>
            <para>The base URL of the Jira site.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.ServiceNowParameters_SiteBaseUrl">
            <summary>
            <para>
            <para>URL of the base site.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.CredentialPair_Username">
            <summary>
            <para>
            <para>User name.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.VpcConnectionProperties_VpcConnectionArn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) for the VPC connection.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.SnowflakeParameters_Warehouse">
            <summary>
            <para>
            <para>Warehouse.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.AthenaParameters_WorkGroup">
            <summary>
            <para>
            <para>The workgroup that Amazon Athena uses.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateDataSourceResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateDataSourceResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DataSourceId parameter.
            The -PassThru parameter is deprecated, use -Select '^DataSourceId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourceCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourcePermissionCmdlet">
            <summary>
            Updates the permissions to a data source.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourcePermissionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The AWS account ID.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourcePermissionCmdlet.DataSourceId">
            <summary>
            <para>
            <para>The ID of the data source. This ID is unique per AWS Region for each AWS account.
            </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourcePermissionCmdlet.GrantPermission">
            <summary>
            <para>
            <para>A list of resource permissions that you want to grant on the data source.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourcePermissionCmdlet.RevokePermission">
            <summary>
            <para>
            <para>A list of resource permissions that you want to revoke on the data source.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourcePermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateDataSourcePermissionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateDataSourcePermissionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourcePermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the DataSourceId parameter.
            The -PassThru parameter is deprecated, use -Select '^DataSourceId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSDataSourcePermissionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSGroupCmdlet">
            <summary>
            Changes a group description.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSGroupCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the group is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSGroupCmdlet.Description">
            <summary>
            <para>
            <para>The description for the group that you want to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSGroupCmdlet.GroupName">
            <summary>
            <para>
            <para>The name of the group that you want to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSGroupCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSGroupCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Group'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateGroupResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateGroupResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSGroupCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the GroupName parameter.
            The -PassThru parameter is deprecated, use -Select '^GroupName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSGroupCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSIAMPolicyAssignmentCmdlet">
            <summary>
            Updates an existing IAM policy assignment. This operation updates only the optional
            parameter or parameters that are specified in the request.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSIAMPolicyAssignmentCmdlet.AssignmentName">
            <summary>
            <para>
            <para>The name of the assignment. This name must be unique within an AWS account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSIAMPolicyAssignmentCmdlet.AssignmentStatus">
            <summary>
            <para>
            <para>The status of the assignment. Possible values are as follows:</para><ul><li><para><code>ENABLED</code> - Anything specified in this assignment is used when creating
            the data source.</para></li><li><para><code>DISABLED</code> - This assignment isn't used when creating the data source.</para></li><li><para><code>DRAFT</code> - This assignment is an unfinished draft and isn't used when creating
            the data source.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSIAMPolicyAssignmentCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the IAM policy assignment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSIAMPolicyAssignmentCmdlet.Identity">
            <summary>
            <para>
            <para>The QuickSight users, groups, or both that you want to assign the policy to.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSIAMPolicyAssignmentCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace of the assignment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSIAMPolicyAssignmentCmdlet.PolicyArn">
            <summary>
            <para>
            <para>The ARN for the IAM policy to apply to the QuickSight users and groups specified in
            this assignment.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSIAMPolicyAssignmentCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateIAMPolicyAssignmentResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateIAMPolicyAssignmentResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSIAMPolicyAssignmentCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AssignmentName parameter.
            The -PassThru parameter is deprecated, use -Select '^AssignmentName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSIAMPolicyAssignmentCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateCmdlet">
            <summary>
            Updates a template from an existing Amazon QuickSight analysis or another template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateCmdlet.SourceAnalysis_Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateCmdlet.SourceTemplate_Arn">
            <summary>
            <para>
            <para>The Amazon Resource Name (ARN) of the resource.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the template that you're updating.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateCmdlet.SourceAnalysis_DataSetReference">
            <summary>
            <para>
            <para>A structure containing information about the dataset references used as placeholders
            in the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateCmdlet.Name">
            <summary>
            <para>
            <para>The name for the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateCmdlet.TemplateId">
            <summary>
            <para>
            <para>The ID for the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateCmdlet.VersionDescription">
            <summary>
            <para>
            <para>A description of the current template version that is being updated. Every time you
            call <code>UpdateTemplate</code>, you create a new version of the template. Each version
            of the template maintains a description of the version in the <code>VersionDescription</code>
            field.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateTemplateResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateTemplateResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^TemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateAliasCmdlet">
            <summary>
            Updates the template alias of a template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateAliasCmdlet.AliasName">
            <summary>
            <para>
            <para>The alias of the template that you want to update. If you name a specific alias, you
            update the version that the alias points to. You can specify the latest version of
            the template by providing the keyword <code>$LATEST</code> in the <code>AliasName</code>
            parameter. The keyword <code>$PUBLISHED</code> doesn't apply to templates.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateAliasCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the template alias that you're updating.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateAliasCmdlet.TemplateId">
            <summary>
            <para>
            <para>The ID for the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateAliasCmdlet.TemplateVersionNumber">
            <summary>
            <para>
            <para>The version number of the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateAliasCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TemplateAlias'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateTemplateAliasResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateTemplateAliasResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateAliasCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the AliasName parameter.
            The -PassThru parameter is deprecated, use -Select '^AliasName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplateAliasCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplatePermissionCmdlet">
            <summary>
            Updates the resource permissions for a template.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplatePermissionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplatePermissionCmdlet.GrantPermission">
            <summary>
            <para>
            <para>A list of resource permissions to be granted on the template. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplatePermissionCmdlet.RevokePermission">
            <summary>
            <para>
            <para>A list of resource permissions to be revoked from the template. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplatePermissionCmdlet.TemplateId">
            <summary>
            <para>
            <para>The ID for the template.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplatePermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateTemplatePermissionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateTemplatePermissionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplatePermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TemplateId parameter.
            The -PassThru parameter is deprecated, use -Select '^TemplateId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSTemplatePermissionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet">
            <summary>
            Updates a theme.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_Accent">
            <summary>
            <para>
            <para>This color is that applies to selected states and buttons.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_AccentForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any text or other elements that appear over the
            accent color.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the theme that you're updating.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.BaseThemeId">
            <summary>
            <para>
            <para>The theme ID, defined by Amazon QuickSight, that a custom theme inherits from. All
            themes initially inherit from a default QuickSight theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.DataColorPalette_Color">
            <summary>
            <para>
            <para>The hexadecimal codes for the colors.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_Danger">
            <summary>
            <para>
            <para>The color that applies to error messages.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_DangerForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any text or other elements that appear over the
            error color.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_Dimension">
            <summary>
            <para>
            <para>The color that applies to the names of fields that are identified as dimensions.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_DimensionForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any text or other elements that appear over the
            dimension color.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.DataColorPalette_EmptyFillColor">
            <summary>
            <para>
            <para>The hexadecimal code of a color that applies to charts where a lack of data is highlighted.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_Measure">
            <summary>
            <para>
            <para>The color that applies to the names of fields that are identified as measures.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_MeasureForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any text or other elements that appear over the
            measure color.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.DataColorPalette_MinMaxGradient">
            <summary>
            <para>
            <para>The minimum and maximum hexadecimal codes that describe a color gradient. </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.Name">
            <summary>
            <para>
            <para>The name for the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_PrimaryBackground">
            <summary>
            <para>
            <para>The background color that applies to visuals and other high emphasis UI.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_PrimaryForeground">
            <summary>
            <para>
            <para>The color of text and other foreground elements that appear over the primary background
            regions, such as grid lines, borders, table banding, icons, and so on.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_SecondaryBackground">
            <summary>
            <para>
            <para>The background color that applies to the sheet background and sheet controls.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_SecondaryForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any sheet title, sheet control text, or UI that
            appears over the secondary background.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.Border_Show">
            <summary>
            <para>
            <para>The option to enable display of borders for visuals.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.Gutter_Show">
            <summary>
            <para>
            <para>This Boolean value controls whether to display a gutter space between sheet tiles.
            </para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.Margin_Show">
            <summary>
            <para>
            <para>This Boolean value controls whether to display sheet margins.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_Success">
            <summary>
            <para>
            <para>The color that applies to success messages, for example the check mark for a successful
            download.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_SuccessForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any text or other elements that appear over the
            success color.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.ThemeId">
            <summary>
            <para>
            <para>The ID for the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.VersionDescription">
            <summary>
            <para>
            <para>A description of the theme version that you're updating Every time that you call <code>UpdateTheme</code>,
            you create a new version of the theme. Each version of the theme maintains a description
            of the version in <code>VersionDescription</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_Warning">
            <summary>
            <para>
            <para>This color that applies to warning and informational messages.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.UIColorPalette_WarningForeground">
            <summary>
            <para>
            <para>The foreground color that applies to any text or other elements that appear over the
            warning color.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateThemeResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateThemeResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ThemeId parameter.
            The -PassThru parameter is deprecated, use -Select '^ThemeId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeAliasCmdlet">
            <summary>
            Updates an alias of a theme.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeAliasCmdlet.AliasName">
            <summary>
            <para>
            <para>The name of the theme alias that you want to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeAliasCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the theme alias that you're updating.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeAliasCmdlet.ThemeId">
            <summary>
            <para>
            <para>The ID for the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeAliasCmdlet.ThemeVersionNumber">
            <summary>
            <para>
            <para>The version number of the theme that the alias should reference.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeAliasCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ThemeAlias'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateThemeAliasResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateThemeAliasResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeAliasCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ThemeId parameter.
            The -PassThru parameter is deprecated, use -Select '^ThemeId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemeAliasCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemePermissionCmdlet">
            <summary>
            Updates the resource permissions for a theme. Permissions apply to the action to grant
            or revoke permissions on, for example <code>"quicksight:DescribeTheme"</code>.
             
              
            <para>
            Theme permissions apply in groupings. Valid groupings include the following for the
            three levels of permissions, which are user, owner, or no permissions:
            </para><ul><li><para>
            User
            </para><ul><li><para><code>"quicksight:DescribeTheme"</code></para></li><li><para><code>"quicksight:DescribeThemeAlias"</code></para></li><li><para><code>"quicksight:ListThemeAliases"</code></para></li><li><para><code>"quicksight:ListThemeVersions"</code></para></li></ul></li><li><para>
            Owner
            </para><ul><li><para><code>"quicksight:DescribeTheme"</code></para></li><li><para><code>"quicksight:DescribeThemeAlias"</code></para></li><li><para><code>"quicksight:ListThemeAliases"</code></para></li><li><para><code>"quicksight:ListThemeVersions"</code></para></li><li><para><code>"quicksight:DeleteTheme"</code></para></li><li><para><code>"quicksight:UpdateTheme"</code></para></li><li><para><code>"quicksight:CreateThemeAlias"</code></para></li><li><para><code>"quicksight:DeleteThemeAlias"</code></para></li><li><para><code>"quicksight:UpdateThemeAlias"</code></para></li><li><para><code>"quicksight:UpdateThemePermissions"</code></para></li><li><para><code>"quicksight:DescribeThemePermissions"</code></para></li></ul></li><li><para>
            To specify no permissions, omit the permissions list.
            </para></li></ul>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemePermissionCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID of the AWS account that contains the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemePermissionCmdlet.GrantPermission">
            <summary>
            <para>
            <para>A list of resource permissions to be granted for the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemePermissionCmdlet.RevokePermission">
            <summary>
            <para>
            <para>A list of resource permissions to be revoked from the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemePermissionCmdlet.ThemeId">
            <summary>
            <para>
            <para>The ID for the theme.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemePermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateThemePermissionsResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateThemePermissionsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemePermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the ThemeId parameter.
            The -PassThru parameter is deprecated, use -Select '^ThemeId' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSThemePermissionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.QS.UpdateQSUserCmdlet">
            <summary>
            Updates an Amazon QuickSight user.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSUserCmdlet.AwsAccountId">
            <summary>
            <para>
            <para>The ID for the AWS account that the user is in. Currently, you use the ID for the
            AWS account that contains your Amazon QuickSight account.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSUserCmdlet.CustomPermissionsName">
            <summary>
            <para>
            <para>(Enterprise edition only) The name of the custom permissions profile that you want
            to assign to this user. Customized permissions allows you to control a user's access
            by restricting access the following operations:</para><ul><li><para>Create and update data sources</para></li><li><para>Create and update datasets</para></li><li><para>Create and update email reports</para></li><li><para>Subscribe to email reports</para></li></ul><para>A set of custom permissions includes any combination of these restrictions. Currently,
            you need to create the profile names for custom permission sets by using the QuickSight
            console. Then, you use the <code>RegisterUser</code> API operation to assign the named
            set of permissions to a QuickSight user. </para><para>QuickSight custom permissions are applied through IAM policies. Therefore, they override
            the permissions typically granted by assigning QuickSight users to one of the default
            security cohorts in QuickSight (admin, author, reader).</para><para>This feature is available only to QuickSight Enterprise edition subscriptions that
            use SAML 2.0-Based Federation for Single Sign-On (SSO).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSUserCmdlet.Email">
            <summary>
            <para>
            <para>The email address of the user that you want to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSUserCmdlet.Namespace">
            <summary>
            <para>
            <para>The namespace. Currently, you should set this to <code>default</code>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSUserCmdlet.Role">
            <summary>
            <para>
            <para>The Amazon QuickSight role of the user. The role can be one of the following default
            security cohorts:</para><ul><li><para><code>READER</code>: A user who has read-only access to dashboards.</para></li><li><para><code>AUTHOR</code>: A user who can create data sources, datasets, analyses, and
            dashboards.</para></li><li><para><code>ADMIN</code>: A user who is an author, who can also manage Amazon QuickSight
            settings.</para></li></ul><para>The name of the QuickSight role is invisible to the user except for the console screens
            dealing with permissions.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSUserCmdlet.UnapplyCustomPermission">
            <summary>
            <para>
            <para>A flag that you use to indicate that you want to remove all custom permissions from
            this user. Using this parameter resets the user to the state it was in before a custom
            permissions profile was applied. This parameter defaults to NULL and it doesn't accept
            any other value.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSUserCmdlet.UserName">
            <summary>
            <para>
            <para>The Amazon QuickSight user name that you want to update.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSUserCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'User'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.QuickSight.Model.UpdateUserResponse).
            Specifying the name of a property of type Amazon.QuickSight.Model.UpdateUserResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSUserCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the UserName parameter.
            The -PassThru parameter is deprecated, use -Select '^UserName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.QS.UpdateQSUserCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
    </members>
</doc>