AWS.Tools.Route53RecoveryReadiness.XML
|
<?xml version="1.0"?>
<doc> <assembly> <name>AWS.Tools.Route53RecoveryReadiness</name> </assembly> <members> <member name="T:Amazon.PowerShell.Cmdlets.PD.AddPDResourceTagCmdlet"> <summary> Adds a tag to a resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.AddPDResourceTagCmdlet.ResourceArn"> <summary> <para> <para>The Amazon Resource Name (ARN) for a resource.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.AddPDResourceTagCmdlet.Tag"> <summary> <para> <para /> Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.AddPDResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.TagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.AddPDResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDArchitectureRecommendationCmdlet"> <summary> Gets recommendations about architecture designs for improving resiliency for an application, based on a recovery group. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDArchitectureRecommendationCmdlet.RecoveryGroupName"> <summary> <para> <para>The name of a recovery group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDArchitectureRecommendationCmdlet.MaxResult"> <summary> <para> <para>The number of objects that you want to return with this call.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDArchitectureRecommendationCmdlet.NextToken"> <summary> <para> <para>The token that identifies which batch of results you want to see.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDArchitectureRecommendationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.GetArchitectureRecommendationsResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.GetArchitectureRecommendationsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDCellCmdlet"> <summary> Gets information about a cell including cell name, cell Amazon Resource Name (ARN), ARNs of nested cells for this cell, and a list of those cell ARNs with their associated recovery group ARNs. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCellCmdlet.CellName"> <summary> <para> <para>The name of the cell.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCellCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.GetCellResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.GetCellResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDCellListCmdlet"> <summary> Lists the cells for an account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. This cmdlet didn't autopaginate in V4, auto-pagination support was added in V5. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCellListCmdlet.MaxResult"> <summary> <para> <para>The number of objects that you want to return with this call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCellListCmdlet.NextToken"> <summary> <para> <para>The token that identifies which batch of results you want to see.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCellListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Cells'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.ListCellsResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.ListCellsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCellListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. This cmdlet didn't autopaginate in V4. To preserve the V4 autopagination behavior for all cmdlets, run Set-AWSAutoIterationMode -IterationMode v4. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDCellReadinessSummaryCmdlet"> <summary> Gets readiness for a cell. Aggregates the readiness of all the resources that are associated with the cell into a single value.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. This cmdlet didn't autopaginate in V4, auto-pagination support was added in V5. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCellReadinessSummaryCmdlet.CellName"> <summary> <para> <para>The name of the cell.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCellReadinessSummaryCmdlet.MaxResult"> <summary> <para> <para>The number of objects that you want to return with this call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCellReadinessSummaryCmdlet.NextToken"> <summary> <para> <para>The token that identifies which batch of results you want to see.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCellReadinessSummaryCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.GetCellReadinessSummaryResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.GetCellReadinessSummaryResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCellReadinessSummaryCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. This cmdlet didn't autopaginate in V4. To preserve the V4 autopagination behavior for all cmdlets, run Set-AWSAutoIterationMode -IterationMode v4. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDCrossAccountAuthorizationListCmdlet"> <summary> Lists the cross-account readiness authorizations that are in place for an account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. This cmdlet didn't autopaginate in V4, auto-pagination support was added in V5. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCrossAccountAuthorizationListCmdlet.MaxResult"> <summary> <para> <para>The number of objects that you want to return with this call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCrossAccountAuthorizationListCmdlet.NextToken"> <summary> <para> <para>The token that identifies which batch of results you want to see.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCrossAccountAuthorizationListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'CrossAccountAuthorizations'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.ListCrossAccountAuthorizationsResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.ListCrossAccountAuthorizationsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDCrossAccountAuthorizationListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. This cmdlet didn't autopaginate in V4. To preserve the V4 autopagination behavior for all cmdlets, run Set-AWSAutoIterationMode -IterationMode v4. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckCmdlet"> <summary> Gets details about a readiness check. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckCmdlet.ReadinessCheckName"> <summary> <para> <para>Name of a readiness check.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.GetReadinessCheckResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.GetReadinessCheckResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckListCmdlet"> <summary> Lists the readiness checks for an account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. This cmdlet didn't autopaginate in V4, auto-pagination support was added in V5. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckListCmdlet.MaxResult"> <summary> <para> <para>The number of objects that you want to return with this call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckListCmdlet.NextToken"> <summary> <para> <para>The token that identifies which batch of results you want to see.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ReadinessChecks'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.ListReadinessChecksResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.ListReadinessChecksResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. This cmdlet didn't autopaginate in V4. To preserve the V4 autopagination behavior for all cmdlets, run Set-AWSAutoIterationMode -IterationMode v4. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckResourceStatusCmdlet"> <summary> Gets individual readiness status for a readiness check. To see the overall readiness status for a recovery group, that considers the readiness status for all the readiness checks in the recovery group, use GetRecoveryGroupReadinessSummary.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. This cmdlet didn't autopaginate in V4, auto-pagination support was added in V5. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckResourceStatusCmdlet.ReadinessCheckName"> <summary> <para> <para>Name of a readiness check.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckResourceStatusCmdlet.ResourceIdentifier"> <summary> <para> <para>The resource identifier, which is the Amazon Resource Name (ARN) or the identifier generated for the resource by Application Recovery Controller (for example, for a DNS target resource).</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckResourceStatusCmdlet.MaxResult"> <summary> <para> <para>The number of objects that you want to return with this call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckResourceStatusCmdlet.NextToken"> <summary> <para> <para>The token that identifies which batch of results you want to see.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckResourceStatusCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.GetReadinessCheckResourceStatusResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.GetReadinessCheckResourceStatusResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckResourceStatusCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. This cmdlet didn't autopaginate in V4. To preserve the V4 autopagination behavior for all cmdlets, run Set-AWSAutoIterationMode -IterationMode v4. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckStatusCmdlet"> <summary> Gets the readiness status for an individual readiness check. To see the overall readiness status for a recovery group, that considers the readiness status for all the readiness checks in a recovery group, use GetRecoveryGroupReadinessSummary.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. This cmdlet didn't autopaginate in V4, auto-pagination support was added in V5. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckStatusCmdlet.ReadinessCheckName"> <summary> <para> <para>Name of a readiness check.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckStatusCmdlet.MaxResult"> <summary> <para> <para>The number of objects that you want to return with this call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckStatusCmdlet.NextToken"> <summary> <para> <para>The token that identifies which batch of results you want to see.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckStatusCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.GetReadinessCheckStatusResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.GetReadinessCheckStatusResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDReadinessCheckStatusCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. This cmdlet didn't autopaginate in V4. To preserve the V4 autopagination behavior for all cmdlets, run Set-AWSAutoIterationMode -IterationMode v4. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupCmdlet"> <summary> Gets details about a recovery group, including a list of the cells that are included in it. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupCmdlet.RecoveryGroupName"> <summary> <para> <para>The name of a recovery group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.GetRecoveryGroupResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.GetRecoveryGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupListCmdlet"> <summary> Lists the recovery groups in an account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. This cmdlet didn't autopaginate in V4, auto-pagination support was added in V5. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupListCmdlet.MaxResult"> <summary> <para> <para>The number of objects that you want to return with this call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupListCmdlet.NextToken"> <summary> <para> <para>The token that identifies which batch of results you want to see.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'RecoveryGroups'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.ListRecoveryGroupsResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.ListRecoveryGroupsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. This cmdlet didn't autopaginate in V4. To preserve the V4 autopagination behavior for all cmdlets, run Set-AWSAutoIterationMode -IterationMode v4. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupReadinessSummaryCmdlet"> <summary> Displays a summary of information about a recovery group's readiness status. Includes the readiness checks for resources in the recovery group and the readiness status of each one.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. This cmdlet didn't autopaginate in V4, auto-pagination support was added in V5. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupReadinessSummaryCmdlet.RecoveryGroupName"> <summary> <para> <para>The name of a recovery group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupReadinessSummaryCmdlet.MaxResult"> <summary> <para> <para>The number of objects that you want to return with this call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupReadinessSummaryCmdlet.NextToken"> <summary> <para> <para>The token that identifies which batch of results you want to see.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupReadinessSummaryCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.GetRecoveryGroupReadinessSummaryResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.GetRecoveryGroupReadinessSummaryResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRecoveryGroupReadinessSummaryCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. This cmdlet didn't autopaginate in V4. To preserve the V4 autopagination behavior for all cmdlets, run Set-AWSAutoIterationMode -IterationMode v4. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDResourceSetCmdlet"> <summary> Displays the details about a resource set, including a list of the resources in the set. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDResourceSetCmdlet.ResourceSetName"> <summary> <para> <para>Name of a resource set.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDResourceSetCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.GetResourceSetResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.GetResourceSetResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDResourceSetListCmdlet"> <summary> Lists the resource sets in an account.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. This cmdlet didn't autopaginate in V4, auto-pagination support was added in V5. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDResourceSetListCmdlet.MaxResult"> <summary> <para> <para>The number of objects that you want to return with this call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDResourceSetListCmdlet.NextToken"> <summary> <para> <para>The token that identifies which batch of results you want to see.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDResourceSetListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'ResourceSets'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.ListResourceSetsResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.ListResourceSetsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDResourceSetListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. This cmdlet didn't autopaginate in V4. To preserve the V4 autopagination behavior for all cmdlets, run Set-AWSAutoIterationMode -IterationMode v4. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDRuleListCmdlet"> <summary> Lists all readiness rules, or lists the readiness rules for a specific resource type.<br/><br/>This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. This cmdlet didn't autopaginate in V4, auto-pagination support was added in V5. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRuleListCmdlet.ResourceType"> <summary> <para> <para>The resource type that a readiness rule applies to.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRuleListCmdlet.MaxResult"> <summary> <para> <para>The number of objects that you want to return with this call.</para> </para> <para> <br/><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br/>In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br/>Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRuleListCmdlet.NextToken"> <summary> <para> <para>The token that identifies which batch of results you want to see.</para> </para> <para> <br/><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br/>'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRuleListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Rules'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.ListRulesResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.ListRulesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDRuleListCmdlet.NoAutoIteration"> <summary> By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. This cmdlet didn't autopaginate in V4. To preserve the V4 autopagination behavior for all cmdlets, run Set-AWSAutoIterationMode -IterationMode v4. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.GetPDTagsForResourceListCmdlet"> <summary> Lists the tags for a resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDTagsForResourceListCmdlet.ResourceArn"> <summary> <para> <para>The Amazon Resource Name (ARN) for a resource.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.GetPDTagsForResourceListCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.ListTagsForResourcesResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.ListTagsForResourcesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.NewPDCellCmdlet"> <summary> Creates a cell in an account. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDCellCmdlet.CellName"> <summary> <para> <para>The name of the cell to create.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDCellCmdlet.Cell"> <summary> <para> <para>A list of cell Amazon Resource Names (ARNs) contained within this cell, for use in nested cells. For example, Availability Zones within specific Amazon Web Services Regions.</para><para /> Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDCellCmdlet.Tag"> <summary> <para> <para /> Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDCellCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.CreateCellResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.CreateCellResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDCellCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.NewPDCrossAccountAuthorizationCmdlet"> <summary> Creates a cross-account readiness authorization. This lets you authorize another account to work with Route 53 Application Recovery Controller, for example, to check the readiness status of resources in a separate account. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDCrossAccountAuthorizationCmdlet.CrossAccountAuthorization"> <summary> <para> <para>The cross-account authorization.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDCrossAccountAuthorizationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is 'CrossAccountAuthorization'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.CreateCrossAccountAuthorizationResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.CreateCrossAccountAuthorizationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDCrossAccountAuthorizationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.NewPDReadinessCheckCmdlet"> <summary> Creates a readiness check in an account. A readiness check monitors a resource set in your application, such as a set of Amazon Aurora instances, that Application Recovery Controller is auditing recovery readiness for. The audits run once every minute on every resource that's associated with a readiness check. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDReadinessCheckCmdlet.ReadinessCheckName"> <summary> <para> <para>The name of the readiness check to create.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDReadinessCheckCmdlet.ResourceSetName"> <summary> <para> <para>The name of the resource set to check.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDReadinessCheckCmdlet.Tag"> <summary> <para> <para /> Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDReadinessCheckCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.CreateReadinessCheckResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.CreateReadinessCheckResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDReadinessCheckCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.NewPDRecoveryGroupCmdlet"> <summary> Creates a recovery group in an account. A recovery group corresponds to an application and includes a list of the cells that make up the application. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDRecoveryGroupCmdlet.Cell"> <summary> <para> <para>A list of the cell Amazon Resource Names (ARNs) in the recovery group.</para><para /> Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDRecoveryGroupCmdlet.RecoveryGroupName"> <summary> <para> <para>The name of the recovery group to create.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDRecoveryGroupCmdlet.Tag"> <summary> <para> <para /> Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDRecoveryGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.CreateRecoveryGroupResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.CreateRecoveryGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDRecoveryGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.NewPDResourceSetCmdlet"> <summary> Creates a resource set. A resource set is a set of resources of one type that span multiple cells. You can associate a resource set with a readiness check to monitor the resources for failover readiness. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDResourceSetCmdlet.Resource"> <summary> <para> <para>A list of resource objects in the resource set.</para><para /> Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDResourceSetCmdlet.ResourceSetName"> <summary> <para> <para>The name of the resource set to create.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDResourceSetCmdlet.ResourceSetType"> <summary> <para> <para>The resource type of the resources in the resource set. Enter one of the following values for resource type:</para><para>AWS::ApiGateway::Stage, AWS::ApiGatewayV2::Stage, AWS::AutoScaling::AutoScalingGroup, AWS::CloudWatch::Alarm, AWS::EC2::CustomerGateway, AWS::DynamoDB::Table, AWS::EC2::Volume, AWS::ElasticLoadBalancing::LoadBalancer, AWS::ElasticLoadBalancingV2::LoadBalancer, AWS::Lambda::Function, AWS::MSK::Cluster, AWS::RDS::DBCluster, AWS::Route53::HealthCheck, AWS::SQS::Queue, AWS::SNS::Topic, AWS::SNS::Subscription, AWS::EC2::VPC, AWS::EC2::VPNConnection, AWS::EC2::VPNGateway, AWS::Route53RecoveryReadiness::DNSTargetResource</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDResourceSetCmdlet.Tag"> <summary> <para> <para>A tag to associate with the parameters for a resource set.</para><para /> Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDResourceSetCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.CreateResourceSetResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.CreateResourceSetResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.NewPDResourceSetCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.RemovePDCellCmdlet"> <summary> Delete a cell. When successful, the response code is 204, with no response body. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDCellCmdlet.CellName"> <summary> <para> <para>The name of the cell.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDCellCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.DeleteCellResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDCellCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.RemovePDCrossAccountAuthorizationCmdlet"> <summary> Deletes cross account readiness authorization. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDCrossAccountAuthorizationCmdlet.CrossAccountAuthorization"> <summary> <para> <para>The cross-account authorization.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDCrossAccountAuthorizationCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.DeleteCrossAccountAuthorizationResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDCrossAccountAuthorizationCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.RemovePDReadinessCheckCmdlet"> <summary> Deletes a readiness check. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDReadinessCheckCmdlet.ReadinessCheckName"> <summary> <para> <para>Name of a readiness check.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDReadinessCheckCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.DeleteReadinessCheckResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDReadinessCheckCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.RemovePDRecoveryGroupCmdlet"> <summary> Deletes a recovery group. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDRecoveryGroupCmdlet.RecoveryGroupName"> <summary> <para> <para>The name of a recovery group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDRecoveryGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.DeleteRecoveryGroupResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDRecoveryGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.RemovePDResourceSetCmdlet"> <summary> Deletes a resource set. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDResourceSetCmdlet.ResourceSetName"> <summary> <para> <para>Name of a resource set.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDResourceSetCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.DeleteResourceSetResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDResourceSetCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.RemovePDResourceTagCmdlet"> <summary> Removes a tag from a resource. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDResourceTagCmdlet.ResourceArn"> <summary> <para> <para>The Amazon Resource Name (ARN) for a resource.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDResourceTagCmdlet.TagKey"> <summary> <para> <para>The keys for tags you add to resources.</para><para /> Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDResourceTagCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.UntagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.RemovePDResourceTagCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.UpdatePDCellCmdlet"> <summary> Updates a cell to replace the list of nested cells with a new list of nested cells. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDCellCmdlet.CellName"> <summary> <para> <para>The name of the cell.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDCellCmdlet.Cell"> <summary> <para> <para>A list of cell Amazon Resource Names (ARNs), which completely replaces the previous list.</para><para /> Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDCellCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.UpdateCellResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.UpdateCellResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDCellCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.UpdatePDReadinessCheckCmdlet"> <summary> Updates a readiness check. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDReadinessCheckCmdlet.ReadinessCheckName"> <summary> <para> <para>Name of a readiness check.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDReadinessCheckCmdlet.ResourceSetName"> <summary> <para> <para>The name of the resource set to be checked.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDReadinessCheckCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.UpdateReadinessCheckResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.UpdateReadinessCheckResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDReadinessCheckCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.UpdatePDRecoveryGroupCmdlet"> <summary> Updates a recovery group. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDRecoveryGroupCmdlet.Cell"> <summary> <para> <para>A list of cell Amazon Resource Names (ARNs). This list completely replaces the previous list.</para><para /> Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDRecoveryGroupCmdlet.RecoveryGroupName"> <summary> <para> <para>The name of a recovery group.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDRecoveryGroupCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.UpdateRecoveryGroupResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.UpdateRecoveryGroupResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDRecoveryGroupCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> <member name="T:Amazon.PowerShell.Cmdlets.PD.UpdatePDResourceSetCmdlet"> <summary> Updates a resource set. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDResourceSetCmdlet.Resource"> <summary> <para> <para>A list of resource objects.</para><para /> Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true. </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDResourceSetCmdlet.ResourceSetName"> <summary> <para> <para>Name of a resource set.</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDResourceSetCmdlet.ResourceSetType"> <summary> <para> <para>The resource type of the resources in the resource set. Enter one of the following values for resource type:</para><para>AWS::ApiGateway::Stage, AWS::ApiGatewayV2::Stage, AWS::AutoScaling::AutoScalingGroup, AWS::CloudWatch::Alarm, AWS::EC2::CustomerGateway, AWS::DynamoDB::Table, AWS::EC2::Volume, AWS::ElasticLoadBalancing::LoadBalancer, AWS::ElasticLoadBalancingV2::LoadBalancer, AWS::Lambda::Function, AWS::MSK::Cluster, AWS::RDS::DBCluster, AWS::Route53::HealthCheck, AWS::SQS::Queue, AWS::SNS::Topic, AWS::SNS::Subscription, AWS::EC2::VPC, AWS::EC2::VPNConnection, AWS::EC2::VPNGateway, AWS::Route53RecoveryReadiness::DNSTargetResource</para> </para> </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDResourceSetCmdlet.Select"> <summary> Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53RecoveryReadiness.Model.UpdateResourceSetResponse). Specifying the name of a property of type Amazon.Route53RecoveryReadiness.Model.UpdateResourceSetResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </summary> </member> <member name="P:Amazon.PowerShell.Cmdlets.PD.UpdatePDResourceSetCmdlet.Force"> <summary> This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution. </summary> </member> </members> </doc> |