AWS.Tools.Route53Resolver

4.0.2.0

AWS.Tools.Route53Resolver.dll-Help.xml

                                <helpItems schema="maml">

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Add-R53RResolverEndpointIpAddressAssociation</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver AssociateResolverEndpointIpAddress API operation.</para>

      </description>

      <verb>Add</verb>

      <noun>R53RResolverEndpointIpAddressAssociation</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Adds IP addresses to an inbound or an outbound resolver endpoint. If you want to adding more than one IP address, submit one <code>AssociateResolverEndpointIpAddress</code> request for each IP address. 

To remove an IP address from an endpoint, see <a>DisassociateResolverEndpointIpAddress</a>. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Add-R53RResolverEndpointIpAddressAssociation</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>IpAddress</name>

          <description>

            <para>Either the IPv4 address that you want to add to a resolver endpoint or a subnet ID. If you specify a subnet ID, Resolver chooses an IP address for you from the available IPs in the specified subnet. </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.IpAddressUpdate</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ResolverEndpointId</name>

          <description>

            <para>The ID of the resolver endpoint that you want to associate IP addresses with. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoint'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.AssociateResolverEndpointIpAddressResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.AssociateResolverEndpointIpAddressResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the IpAddress parameter. The -PassThru parameter is deprecated, use -Select '^IpAddress' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Force</name>

          <description>

            <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Force</name>

        <description>

          <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>IpAddress</name>

        <description>

          <para>Either the IPv4 address that you want to add to a resolver endpoint or a subnet ID. If you specify a subnet ID, Resolver chooses an IP address for you from the available IPs in the specified subnet. </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.IpAddressUpdate</parameterValue>

        <type>

          <name>Amazon.Route53Resolver.Model.IpAddressUpdate</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the IpAddress parameter. The -PassThru parameter is deprecated, use -Select '^IpAddress' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ResolverEndpointId</name>

        <description>

          <para>The ID of the resolver endpoint that you want to associate IP addresses with. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoint'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.AssociateResolverEndpointIpAddressResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.AssociateResolverEndpointIpAddressResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverEndpoint or Amazon.Route53Resolver.Model.AssociateResolverEndpointIpAddressResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns an Amazon.Route53Resolver.Model.ResolverEndpoint object.

The service call response (type Amazon.Route53Resolver.Model.AssociateResolverEndpointIpAddressResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Add-R53RResolverEndpointIpAddressAssociation.html&amp;tocid=Add-R53RResolverEndpointIpAddressAssociation</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Add-R53RResolverRuleAssociation</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver AssociateResolverRule API operation.</para>

      </description>

      <verb>Add</verb>

      <noun>R53RResolverRuleAssociation</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Associates a resolver rule with a VPC. When you associate a rule with a VPC, Resolver forwards all DNS queries for the domain name that is specified in the rule and that originate in the VPC. The queries are forwarded to the IP addresses for the DNS resolvers that are specified in the rule. For more information about rules, see <a>CreateResolverRule</a>. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Add-R53RResolverRuleAssociation</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResolverRuleId</name>

          <description>

            <para>The ID of the resolver rule that you want to associate with the VPC. To list the existing resolver rules, use <a>ListResolverRules</a>. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Name</name>

          <description>

            <para>A name for the association that you're creating between a resolver rule and a VPC. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>VPCId</name>

          <description>

            <para>The ID of the VPC that you want to associate the resolver rule with. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRuleAssociation'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.AssociateResolverRuleResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.AssociateResolverRuleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResolverRuleId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRuleId' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Force</name>

          <description>

            <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Force</name>

        <description>

          <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Name</name>

        <description>

          <para>A name for the association that you're creating between a resolver rule and a VPC. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResolverRuleId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRuleId' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResolverRuleId</name>

        <description>

          <para>The ID of the resolver rule that you want to associate with the VPC. To list the existing resolver rules, use <a>ListResolverRules</a>. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRuleAssociation'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.AssociateResolverRuleResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.AssociateResolverRuleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>VPCId</name>

        <description>

          <para>The ID of the VPC that you want to associate the resolver rule with. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverRuleAssociation or Amazon.Route53Resolver.Model.AssociateResolverRuleResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns an Amazon.Route53Resolver.Model.ResolverRuleAssociation object.

The service call response (type Amazon.Route53Resolver.Model.AssociateResolverRuleResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Add-R53RResolverRuleAssociation.html&amp;tocid=Add-R53RResolverRuleAssociation</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Add-R53RResourceTag</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver TagResource API operation.</para>

      </description>

      <verb>Add</verb>

      <noun>R53RResourceTag</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Adds one or more tags to a specified resource. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Add-R53RResourceTag</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResourceArn</name>

          <description>

            <para>The Amazon Resource Name (ARN) for the resource that you want to add tags to. To get the ARN for a resource, use the applicable <code>Get</code> or <code>List</code> command: 

 - <a>GetResolverEndpoint</a> 

 - <a>GetResolverRule</a> 

 - <a>GetResolverRuleAssociation</a> 

 - <a>ListResolverEndpoints</a> 

 - <a>ListResolverRuleAssociations</a> 

 - <a>ListResolverRules</a> </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Tag</name>

          <description>

            <para>The tags that you want to add to the specified resource. </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.Tag[]</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.TagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Force</name>

          <description>

            <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Force</name>

        <description>

          <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResourceArn</name>

        <description>

          <para>The Amazon Resource Name (ARN) for the resource that you want to add tags to. To get the ARN for a resource, use the applicable <code>Get</code> or <code>List</code> command: 

 - <a>GetResolverEndpoint</a> 

 - <a>GetResolverRule</a> 

 - <a>GetResolverRuleAssociation</a> 

 - <a>ListResolverEndpoints</a> 

 - <a>ListResolverRuleAssociations</a> 

 - <a>ListResolverRules</a> </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.TagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Tag</name>

        <description>

          <para>The tags that you want to add to the specified resource. </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.Tag[]</parameterValue>

        <type>

          <name>Amazon.Route53Resolver.Model.Tag[]</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>None or Amazon.Route53Resolver.Model.TagResourceResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet does not generate any output.The service response (type Amazon.Route53Resolver.Model.TagResourceResponse) can be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Add-R53RResourceTag.html&amp;tocid=Add-R53RResourceTag</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Get-R53RResolverEndpoint</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver GetResolverEndpoint API operation.</para>

      </description>

      <verb>Get</verb>

      <noun>R53RResolverEndpoint</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Gets information about a specified resolver endpoint, such as whether it's an inbound or an outbound resolver endpoint, and the current status of the endpoint. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Get-R53RResolverEndpoint</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResolverEndpointId</name>

          <description>

            <para>The ID of the resolver endpoint that you want to get information about. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoint'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.GetResolverEndpointResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.GetResolverEndpointResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResolverEndpointId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverEndpointId' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResolverEndpointId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverEndpointId' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResolverEndpointId</name>

        <description>

          <para>The ID of the resolver endpoint that you want to get information about. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoint'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.GetResolverEndpointResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.GetResolverEndpointResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverEndpoint or Amazon.Route53Resolver.Model.GetResolverEndpointResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns an Amazon.Route53Resolver.Model.ResolverEndpoint object.

The service call response (type Amazon.Route53Resolver.Model.GetResolverEndpointResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Get-R53RResolverEndpoint.html&amp;tocid=Get-R53RResolverEndpoint</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Get-R53RResolverEndpointIpAddressList</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver ListResolverEndpointIpAddresses API operation.</para>

      </description>

      <verb>Get</verb>

      <noun>R53RResolverEndpointIpAddressList</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Gets the IP addresses for a specified resolver endpoint.<br /><br />This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Get-R53RResolverEndpointIpAddressList</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResolverEndpointId</name>

          <description>

            <para>The ID of the resolver endpoint that you want to get IP addresses for. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>MaxResult</name>

          <description>

            <para>The maximum number of IP addresses that you want to return in the response to a <code>ListResolverEndpointIpAddresses</code> request. If you don't specify a value for <code>MaxResults</code>, Resolver returns up to 100 IP addresses.  

<br /><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br />In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br />Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. 

If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Int32</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>NextToken</name>

          <description>

            <para>For the first <code>ListResolverEndpointIpAddresses</code> request, omit this value. 

If the specified resolver endpoint has more than <code>MaxResults</code> IP addresses, you can submit another <code>ListResolverEndpointIpAddresses</code> request to get the next group of IP addresses. In the next request, specify the value of <code>NextToken</code> from the previous response.  

<br /><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br />In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'IpAddresses'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.ListResolverEndpointIpAddressesResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.ListResolverEndpointIpAddressesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResolverEndpointId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverEndpointId' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>NoAutoIteration</name>

          <description>

            <para>By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>MaxResult</name>

        <description>

          <para>The maximum number of IP addresses that you want to return in the response to a <code>ListResolverEndpointIpAddresses</code> request. If you don't specify a value for <code>MaxResults</code>, Resolver returns up to 100 IP addresses.  

<br /><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br />In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br />Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. 

If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Int32</parameterValue>

        <type>

          <name>System.Int32</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>NextToken</name>

        <description>

          <para>For the first <code>ListResolverEndpointIpAddresses</code> request, omit this value. 

If the specified resolver endpoint has more than <code>MaxResults</code> IP addresses, you can submit another <code>ListResolverEndpointIpAddresses</code> request to get the next group of IP addresses. In the next request, specify the value of <code>NextToken</code> from the previous response.  

<br /><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br />In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>NoAutoIteration</name>

        <description>

          <para>By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResolverEndpointId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverEndpointId' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResolverEndpointId</name>

        <description>

          <para>The ID of the resolver endpoint that you want to get IP addresses for. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'IpAddresses'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.ListResolverEndpointIpAddressesResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.ListResolverEndpointIpAddressesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.IpAddressResponse or Amazon.Route53Resolver.Model.ListResolverEndpointIpAddressesResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns a collection of Amazon.Route53Resolver.Model.IpAddressResponse objects.

The service call response (type Amazon.Route53Resolver.Model.ListResolverEndpointIpAddressesResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Get-R53RResolverEndpointIpAddressList.html&amp;tocid=Get-R53RResolverEndpointIpAddressList</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Get-R53RResolverEndpointList</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver ListResolverEndpoints API operation.</para>

      </description>

      <verb>Get</verb>

      <noun>R53RResolverEndpointList</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Lists all the resolver endpoints that were created using the current AWS account.<br /><br />This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Get-R53RResolverEndpointList</name>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Filter</name>

          <description>

            <para>An optional specification to return a subset of resolver endpoints, such as all inbound resolver endpoints. 

If you submit a second or subsequent <code>ListResolverEndpoints</code> request and specify the <code>NextToken</code> parameter, you must use the same values for <code>Filters</code>, if any, as in the previous request. </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.Filter[]</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>MaxResult</name>

          <description>

            <para>The maximum number of resolver endpoints that you want to return in the response to a <code>ListResolverEndpoints</code> request. If you don't specify a value for <code>MaxResults</code>, Resolver returns up to 100 resolver endpoints.  

<br /><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br />In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br />Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. 

If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Int32</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>NextToken</name>

          <description>

            <para>For the first <code>ListResolverEndpoints</code> request, omit this value. 

If you have more than <code>MaxResults</code> resolver endpoints, you can submit another <code>ListResolverEndpoints</code> request to get the next group of resolver endpoints. In the next request, specify the value of <code>NextToken</code> from the previous response.  

<br /><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br />In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoints'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.ListResolverEndpointsResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.ListResolverEndpointsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>NoAutoIteration</name>

          <description>

            <para>By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Filter</name>

        <description>

          <para>An optional specification to return a subset of resolver endpoints, such as all inbound resolver endpoints. 

If you submit a second or subsequent <code>ListResolverEndpoints</code> request and specify the <code>NextToken</code> parameter, you must use the same values for <code>Filters</code>, if any, as in the previous request. </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.Filter[]</parameterValue>

        <type>

          <name>Amazon.Route53Resolver.Model.Filter[]</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>MaxResult</name>

        <description>

          <para>The maximum number of resolver endpoints that you want to return in the response to a <code>ListResolverEndpoints</code> request. If you don't specify a value for <code>MaxResults</code>, Resolver returns up to 100 resolver endpoints.  

<br /><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br />In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br />Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. 

If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Int32</parameterValue>

        <type>

          <name>System.Int32</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>NextToken</name>

        <description>

          <para>For the first <code>ListResolverEndpoints</code> request, omit this value. 

If you have more than <code>MaxResults</code> resolver endpoints, you can submit another <code>ListResolverEndpoints</code> request to get the next group of resolver endpoints. In the next request, specify the value of <code>NextToken</code> from the previous response.  

<br /><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br />In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>NoAutoIteration</name>

        <description>

          <para>By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoints'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.ListResolverEndpointsResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.ListResolverEndpointsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverEndpoint or Amazon.Route53Resolver.Model.ListResolverEndpointsResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns a collection of Amazon.Route53Resolver.Model.ResolverEndpoint objects.

The service call response (type Amazon.Route53Resolver.Model.ListResolverEndpointsResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Get-R53RResolverEndpointList.html&amp;tocid=Get-R53RResolverEndpointList</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Get-R53RResolverRule</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver GetResolverRule API operation.</para>

      </description>

      <verb>Get</verb>

      <noun>R53RResolverRule</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Gets information about a specified resolver rule, such as the domain name that the rule forwards DNS queries for and the ID of the outbound resolver endpoint that the rule is associated with. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Get-R53RResolverRule</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResolverRuleId</name>

          <description>

            <para>The ID of the resolver rule that you want to get information about. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRule'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.GetResolverRuleResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.GetResolverRuleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResolverRuleId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRuleId' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResolverRuleId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRuleId' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResolverRuleId</name>

        <description>

          <para>The ID of the resolver rule that you want to get information about. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRule'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.GetResolverRuleResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.GetResolverRuleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverRule or Amazon.Route53Resolver.Model.GetResolverRuleResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns an Amazon.Route53Resolver.Model.ResolverRule object.

The service call response (type Amazon.Route53Resolver.Model.GetResolverRuleResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Get-R53RResolverRule.html&amp;tocid=Get-R53RResolverRule</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Get-R53RResolverRuleAssociation</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver GetResolverRuleAssociation API operation.</para>

      </description>

      <verb>Get</verb>

      <noun>R53RResolverRuleAssociation</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Gets information about an association between a specified resolver rule and a VPC. You associate a resolver rule and a VPC using <a>AssociateResolverRule</a>. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Get-R53RResolverRuleAssociation</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResolverRuleAssociationId</name>

          <description>

            <para>The ID of the resolver rule association that you want to get information about. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRuleAssociation'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.GetResolverRuleAssociationResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.GetResolverRuleAssociationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResolverRuleAssociationId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRuleAssociationId' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResolverRuleAssociationId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRuleAssociationId' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResolverRuleAssociationId</name>

        <description>

          <para>The ID of the resolver rule association that you want to get information about. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRuleAssociation'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.GetResolverRuleAssociationResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.GetResolverRuleAssociationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverRuleAssociation or Amazon.Route53Resolver.Model.GetResolverRuleAssociationResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns an Amazon.Route53Resolver.Model.ResolverRuleAssociation object.

The service call response (type Amazon.Route53Resolver.Model.GetResolverRuleAssociationResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Get-R53RResolverRuleAssociation.html&amp;tocid=Get-R53RResolverRuleAssociation</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Get-R53RResolverRuleAssociationList</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver ListResolverRuleAssociations API operation.</para>

      </description>

      <verb>Get</verb>

      <noun>R53RResolverRuleAssociationList</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Lists the associations that were created between resolver rules and VPCs using the current AWS account.<br /><br />This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Get-R53RResolverRuleAssociationList</name>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Filter</name>

          <description>

            <para>An optional specification to return a subset of resolver rules, such as resolver rules that are associated with the same VPC ID. 

If you submit a second or subsequent <code>ListResolverRuleAssociations</code> request and specify the <code>NextToken</code> parameter, you must use the same values for <code>Filters</code>, if any, as in the previous request. </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.Filter[]</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>MaxResult</name>

          <description>

            <para>The maximum number of rule associations that you want to return in the response to a <code>ListResolverRuleAssociations</code> request. If you don't specify a value for <code>MaxResults</code>, Resolver returns up to 100 rule associations.  

<br /><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br />In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br />Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. 

If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Int32</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>NextToken</name>

          <description>

            <para>For the first <code>ListResolverRuleAssociation</code> request, omit this value. 

If you have more than <code>MaxResults</code> rule associations, you can submit another <code>ListResolverRuleAssociation</code> request to get the next group of rule associations. In the next request, specify the value of <code>NextToken</code> from the previous response.  

<br /><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br />In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRuleAssociations'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.ListResolverRuleAssociationsResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.ListResolverRuleAssociationsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>NoAutoIteration</name>

          <description>

            <para>By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Filter</name>

        <description>

          <para>An optional specification to return a subset of resolver rules, such as resolver rules that are associated with the same VPC ID. 

If you submit a second or subsequent <code>ListResolverRuleAssociations</code> request and specify the <code>NextToken</code> parameter, you must use the same values for <code>Filters</code>, if any, as in the previous request. </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.Filter[]</parameterValue>

        <type>

          <name>Amazon.Route53Resolver.Model.Filter[]</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>MaxResult</name>

        <description>

          <para>The maximum number of rule associations that you want to return in the response to a <code>ListResolverRuleAssociations</code> request. If you don't specify a value for <code>MaxResults</code>, Resolver returns up to 100 rule associations.  

<br /><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br />In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br />Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. 

If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Int32</parameterValue>

        <type>

          <name>System.Int32</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>NextToken</name>

        <description>

          <para>For the first <code>ListResolverRuleAssociation</code> request, omit this value. 

If you have more than <code>MaxResults</code> rule associations, you can submit another <code>ListResolverRuleAssociation</code> request to get the next group of rule associations. In the next request, specify the value of <code>NextToken</code> from the previous response.  

<br /><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br />In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>NoAutoIteration</name>

        <description>

          <para>By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRuleAssociations'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.ListResolverRuleAssociationsResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.ListResolverRuleAssociationsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverRuleAssociation or Amazon.Route53Resolver.Model.ListResolverRuleAssociationsResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns a collection of Amazon.Route53Resolver.Model.ResolverRuleAssociation objects.

The service call response (type Amazon.Route53Resolver.Model.ListResolverRuleAssociationsResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Get-R53RResolverRuleAssociationList.html&amp;tocid=Get-R53RResolverRuleAssociationList</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Get-R53RResolverRuleList</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver ListResolverRules API operation.</para>

      </description>

      <verb>Get</verb>

      <noun>R53RResolverRuleList</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Lists the resolver rules that were created using the current AWS account.<br /><br />This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Get-R53RResolverRuleList</name>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Filter</name>

          <description>

            <para>An optional specification to return a subset of resolver rules, such as all resolver rules that are associated with the same resolver endpoint. 

If you submit a second or subsequent <code>ListResolverRules</code> request and specify the <code>NextToken</code> parameter, you must use the same values for <code>Filters</code>, if any, as in the previous request. </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.Filter[]</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>MaxResult</name>

          <description>

            <para>The maximum number of resolver rules that you want to return in the response to a <code>ListResolverRules</code> request. If you don't specify a value for <code>MaxResults</code>, Resolver returns up to 100 resolver rules. 

<br /><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br />In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br />Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. 

If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Int32</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>NextToken</name>

          <description>

            <para>For the first <code>ListResolverRules</code> request, omit this value. 

If you have more than <code>MaxResults</code> resolver rules, you can submit another <code>ListResolverRules</code> request to get the next group of resolver rules. In the next request, specify the value of <code>NextToken</code> from the previous response. 

<br /><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br />In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRules'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.ListResolverRulesResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.ListResolverRulesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>NoAutoIteration</name>

          <description>

            <para>By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Filter</name>

        <description>

          <para>An optional specification to return a subset of resolver rules, such as all resolver rules that are associated with the same resolver endpoint. 

If you submit a second or subsequent <code>ListResolverRules</code> request and specify the <code>NextToken</code> parameter, you must use the same values for <code>Filters</code>, if any, as in the previous request. </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.Filter[]</parameterValue>

        <type>

          <name>Amazon.Route53Resolver.Model.Filter[]</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>MaxResult</name>

        <description>

          <para>The maximum number of resolver rules that you want to return in the response to a <code>ListResolverRules</code> request. If you don't specify a value for <code>MaxResults</code>, Resolver returns up to 100 resolver rules. 

<br /><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br />In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br />Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. 

If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Int32</parameterValue>

        <type>

          <name>System.Int32</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>NextToken</name>

        <description>

          <para>For the first <code>ListResolverRules</code> request, omit this value. 

If you have more than <code>MaxResults</code> resolver rules, you can submit another <code>ListResolverRules</code> request to get the next group of resolver rules. In the next request, specify the value of <code>NextToken</code> from the previous response. 

<br /><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br />In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>NoAutoIteration</name>

        <description>

          <para>By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRules'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.ListResolverRulesResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.ListResolverRulesResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverRule or Amazon.Route53Resolver.Model.ListResolverRulesResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns a collection of Amazon.Route53Resolver.Model.ResolverRule objects.

The service call response (type Amazon.Route53Resolver.Model.ListResolverRulesResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Get-R53RResolverRuleList.html&amp;tocid=Get-R53RResolverRuleList</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Get-R53RResolverRulePolicy</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver GetResolverRulePolicy API operation.</para>

      </description>

      <verb>Get</verb>

      <noun>R53RResolverRulePolicy</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Gets information about a resolver rule policy. A resolver rule policy specifies the Resolver operations and resources that you want to allow another AWS account to be able to use. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Get-R53RResolverRulePolicy</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>Arn</name>

          <description>

            <para>The ID of the resolver rule policy that you want to get information about. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRulePolicy'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.GetResolverRulePolicyResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.GetResolverRulePolicyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the Arn parameter. The -PassThru parameter is deprecated, use -Select '^Arn' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>Arn</name>

        <description>

          <para>The ID of the resolver rule policy that you want to get information about. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the Arn parameter. The -PassThru parameter is deprecated, use -Select '^Arn' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRulePolicy'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.GetResolverRulePolicyResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.GetResolverRulePolicyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>System.String or Amazon.Route53Resolver.Model.GetResolverRulePolicyResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns a System.String object.

The service call response (type Amazon.Route53Resolver.Model.GetResolverRulePolicyResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Get-R53RResolverRulePolicy.html&amp;tocid=Get-R53RResolverRulePolicy</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Get-R53RResourceTagList</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver ListTagsForResource API operation.</para>

      </description>

      <verb>Get</verb>

      <noun>R53RResourceTagList</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Lists the tags that you associated with the specified resource.<br /><br />This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Get-R53RResourceTagList</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResourceArn</name>

          <description>

            <para>The Amazon Resource Name (ARN) for the resource that you want to list tags for. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>MaxResult</name>

          <description>

            <para>The maximum number of tags that you want to return in the response to a <code>ListTagsForResource</code> request. If you don't specify a value for <code>MaxResults</code>, Resolver returns up to 100 tags. 

<br /><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br />In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br />Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. 

If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Int32</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>NextToken</name>

          <description>

            <para>For the first <code>ListTagsForResource</code> request, omit this value. 

If you have more than <code>MaxResults</code> tags, you can submit another <code>ListTagsForResource</code> request to get the next group of tags for the resource. In the next request, specify the value of <code>NextToken</code> from the previous response.  

<br /><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br />In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.ListTagsForResourceResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.ListTagsForResourceResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>NoAutoIteration</name>

          <description>

            <para>By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>MaxResult</name>

        <description>

          <para>The maximum number of tags that you want to return in the response to a <code>ListTagsForResource</code> request. If you don't specify a value for <code>MaxResults</code>, Resolver returns up to 100 tags. 

<br /><b>Note:</b> In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet. <br />In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call. <br />Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned. 

If a value for this parameter is not specified the cmdlet will use a default value of '<b>100</b>'. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Int32</parameterValue>

        <type>

          <name>System.Int32</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>NextToken</name>

        <description>

          <para>For the first <code>ListTagsForResource</code> request, omit this value. 

If you have more than <code>MaxResults</code> tags, you can submit another <code>ListTagsForResource</code> request to get the next group of tags for the resource. In the next request, specify the value of <code>NextToken</code> from the previous response.  

<br /><b>Note:</b> This parameter is only used if you are manually controlling output pagination of the service API call. <br />In order to manually control output pagination, use '-NextToken $null' for the first call and '-NextToken $AWSHistory.LastServiceResponse.NextToken' for subsequent calls. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>NoAutoIteration</name>

        <description>

          <para>By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResourceArn</name>

        <description>

          <para>The Amazon Resource Name (ARN) for the resource that you want to list tags for. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'Tags'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.ListTagsForResourceResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.ListTagsForResourceResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.Tag or Amazon.Route53Resolver.Model.ListTagsForResourceResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns a collection of Amazon.Route53Resolver.Model.Tag objects.

The service call response (type Amazon.Route53Resolver.Model.ListTagsForResourceResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Get-R53RResourceTagList.html&amp;tocid=Get-R53RResourceTagList</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>New-R53RResolverEndpoint</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver CreateResolverEndpoint API operation.</para>

      </description>

      <verb>New</verb>

      <noun>R53RResolverEndpoint</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Creates a resolver endpoint. There are two types of resolver endpoints, inbound and outbound: 

 - 

An <i>inbound resolver endpoint</i> forwards DNS queries to the DNS service for a VPC from your network or another VPC. 

 - 

An <i>outbound resolver endpoint</i> forwards DNS queries from the DNS service for a VPC to your network or another VPC. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>New-R53RResolverEndpoint</name>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>Name</name>

          <description>

            <para>A friendly name that lets you easily find a configuration in the Resolver dashboard in the Route 53 console. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>CreatorRequestId</name>

          <description>

            <para>A unique string that identifies the request and that allows failed requests to be retried without the risk of executing the operation twice. <code>CreatorRequestId</code> can be any unique string, for example, a date/time stamp.  </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Direction</name>

          <description>

            <para>Specify the applicable value: 

 - <code>INBOUND</code>: Resolver forwards DNS queries to the DNS service for a VPC from your network or another VPC 

 - <code>OUTBOUND</code>: Resolver forwards DNS queries from the DNS service for a VPC to your network or another VPC </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.ResolverEndpointDirection</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>IpAddress</name>

          <description>

            <para>The subnets and IP addresses in your VPC that you want DNS queries to pass through on the way from your VPCs to your network (for outbound endpoints) or on the way from your network to your VPCs (for inbound resolver endpoints).  </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.IpAddressRequest[]</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecurityGroupId</name>

          <description>

            <para>The ID of one or more security groups that you want to use to control access to this VPC. The security group that you specify must include one or more inbound rules (for inbound resolver endpoints) or outbound rules (for outbound resolver endpoints). </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String[]</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Tag</name>

          <description>

            <para>A list of the tag keys and values that you want to associate with the endpoint. </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.Tag[]</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoint'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.CreateResolverEndpointResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.CreateResolverEndpointResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Force</name>

          <description>

            <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>CreatorRequestId</name>

        <description>

          <para>A unique string that identifies the request and that allows failed requests to be retried without the risk of executing the operation twice. <code>CreatorRequestId</code> can be any unique string, for example, a date/time stamp.  </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Direction</name>

        <description>

          <para>Specify the applicable value: 

 - <code>INBOUND</code>: Resolver forwards DNS queries to the DNS service for a VPC from your network or another VPC 

 - <code>OUTBOUND</code>: Resolver forwards DNS queries from the DNS service for a VPC to your network or another VPC </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.ResolverEndpointDirection</parameterValue>

        <type>

          <name>Amazon.Route53Resolver.ResolverEndpointDirection</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Force</name>

        <description>

          <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>IpAddress</name>

        <description>

          <para>The subnets and IP addresses in your VPC that you want DNS queries to pass through on the way from your VPCs to your network (for outbound endpoints) or on the way from your network to your VPCs (for inbound resolver endpoints).  </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.IpAddressRequest[]</parameterValue>

        <type>

          <name>Amazon.Route53Resolver.Model.IpAddressRequest[]</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>Name</name>

        <description>

          <para>A friendly name that lets you easily find a configuration in the Resolver dashboard in the Route 53 console. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecurityGroupId</name>

        <description>

          <para>The ID of one or more security groups that you want to use to control access to this VPC. The security group that you specify must include one or more inbound rules (for inbound resolver endpoints) or outbound rules (for outbound resolver endpoints). </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String[]</parameterValue>

        <type>

          <name>System.String[]</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoint'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.CreateResolverEndpointResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.CreateResolverEndpointResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Tag</name>

        <description>

          <para>A list of the tag keys and values that you want to associate with the endpoint. </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.Tag[]</parameterValue>

        <type>

          <name>Amazon.Route53Resolver.Model.Tag[]</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverEndpoint or Amazon.Route53Resolver.Model.CreateResolverEndpointResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns an Amazon.Route53Resolver.Model.ResolverEndpoint object.

The service call response (type Amazon.Route53Resolver.Model.CreateResolverEndpointResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=New-R53RResolverEndpoint.html&amp;tocid=New-R53RResolverEndpoint</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>New-R53RResolverRule</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver CreateResolverRule API operation.</para>

      </description>

      <verb>New</verb>

      <noun>R53RResolverRule</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>For DNS queries that originate in your VPCs, specifies which resolver endpoint the queries pass through, one domain name that you want to forward to your network, and the IP addresses of the DNS resolvers in your network. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>New-R53RResolverRule</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>DomainName</name>

          <description>

            <para>DNS queries for this domain name are forwarded to the IP addresses that you specify in <code>TargetIps</code>. If a query matches multiple resolver rules (example.com and www.example.com), outbound DNS queries are routed using the resolver rule that contains the most specific domain name (www.example.com). </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>CreatorRequestId</name>

          <description>

            <para>A unique string that identifies the request and that allows failed requests to be retried without the risk of executing the operation twice. <code>CreatorRequestId</code> can be any unique string, for example, a date/time stamp.  </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Name</name>

          <description>

            <para>A friendly name that lets you easily find a rule in the Resolver dashboard in the Route 53 console. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ResolverEndpointId</name>

          <description>

            <para>The ID of the outbound resolver endpoint that you want to use to route DNS queries to the IP addresses that you specify in <code>TargetIps</code>. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>RuleType</name>

          <description>

            <para>Specify <code>FORWARD</code>. Other resolver rule types aren't supported. </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.RuleTypeOption</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Tag</name>

          <description>

            <para>A list of the tag keys and values that you want to associate with the endpoint. </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.Tag[]</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>TargetIp</name>

          <description>

            <para>The IPs that you want Resolver to forward DNS queries to. You can specify only IPv4 addresses. Separate IP addresses with a comma. </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.TargetAddress[]</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRule'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.CreateResolverRuleResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.CreateResolverRuleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the DomainName parameter. The -PassThru parameter is deprecated, use -Select '^DomainName' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Force</name>

          <description>

            <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>CreatorRequestId</name>

        <description>

          <para>A unique string that identifies the request and that allows failed requests to be retried without the risk of executing the operation twice. <code>CreatorRequestId</code> can be any unique string, for example, a date/time stamp.  </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>DomainName</name>

        <description>

          <para>DNS queries for this domain name are forwarded to the IP addresses that you specify in <code>TargetIps</code>. If a query matches multiple resolver rules (example.com and www.example.com), outbound DNS queries are routed using the resolver rule that contains the most specific domain name (www.example.com). </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Force</name>

        <description>

          <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Name</name>

        <description>

          <para>A friendly name that lets you easily find a rule in the Resolver dashboard in the Route 53 console. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the DomainName parameter. The -PassThru parameter is deprecated, use -Select '^DomainName' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ResolverEndpointId</name>

        <description>

          <para>The ID of the outbound resolver endpoint that you want to use to route DNS queries to the IP addresses that you specify in <code>TargetIps</code>. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>RuleType</name>

        <description>

          <para>Specify <code>FORWARD</code>. Other resolver rule types aren't supported. </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.RuleTypeOption</parameterValue>

        <type>

          <name>Amazon.Route53Resolver.RuleTypeOption</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRule'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.CreateResolverRuleResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.CreateResolverRuleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Tag</name>

        <description>

          <para>A list of the tag keys and values that you want to associate with the endpoint. </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.Tag[]</parameterValue>

        <type>

          <name>Amazon.Route53Resolver.Model.Tag[]</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>TargetIp</name>

        <description>

          <para>The IPs that you want Resolver to forward DNS queries to. You can specify only IPv4 addresses. Separate IP addresses with a comma. </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.TargetAddress[]</parameterValue>

        <type>

          <name>Amazon.Route53Resolver.Model.TargetAddress[]</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverRule or Amazon.Route53Resolver.Model.CreateResolverRuleResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns an Amazon.Route53Resolver.Model.ResolverRule object.

The service call response (type Amazon.Route53Resolver.Model.CreateResolverRuleResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=New-R53RResolverRule.html&amp;tocid=New-R53RResolverRule</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Remove-R53RResolverEndpoint</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver DeleteResolverEndpoint API operation.</para>

      </description>

      <verb>Remove</verb>

      <noun>R53RResolverEndpoint</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Deletes a resolver endpoint. The effect of deleting a resolver endpoint depends on whether it's an inbound or an outbound resolver endpoint: 

 - <b>Inbound</b>: DNS queries from your network or another VPC are no longer routed to the DNS service for the specified VPC. 

 - <b>Outbound</b>: DNS queries from a VPC are no longer routed to your network or to another VPC. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Remove-R53RResolverEndpoint</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResolverEndpointId</name>

          <description>

            <para>The ID of the resolver endpoint that you want to delete. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoint'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.DeleteResolverEndpointResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.DeleteResolverEndpointResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResolverEndpointId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverEndpointId' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Force</name>

          <description>

            <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Force</name>

        <description>

          <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResolverEndpointId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverEndpointId' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResolverEndpointId</name>

        <description>

          <para>The ID of the resolver endpoint that you want to delete. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoint'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.DeleteResolverEndpointResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.DeleteResolverEndpointResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverEndpoint or Amazon.Route53Resolver.Model.DeleteResolverEndpointResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns an Amazon.Route53Resolver.Model.ResolverEndpoint object.

The service call response (type Amazon.Route53Resolver.Model.DeleteResolverEndpointResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Remove-R53RResolverEndpoint.html&amp;tocid=Remove-R53RResolverEndpoint</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Remove-R53RResolverEndpointIpAddressAssociation</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver DisassociateResolverEndpointIpAddress API operation.</para>

      </description>

      <verb>Remove</verb>

      <noun>R53RResolverEndpointIpAddressAssociation</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Removes IP addresses from an inbound or an outbound resolver endpoint. If you want to remove more than one IP address, submit one <code>DisassociateResolverEndpointIpAddress</code> request for each IP address. 

To add an IP address to an endpoint, see <a>AssociateResolverEndpointIpAddress</a>. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Remove-R53RResolverEndpointIpAddressAssociation</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>IpAddress</name>

          <description>

            <para>The IPv4 address that you want to remove from a resolver endpoint. </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.IpAddressUpdate</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ResolverEndpointId</name>

          <description>

            <para>The ID of the resolver endpoint that you want to disassociate an IP address from. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoint'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.DisassociateResolverEndpointIpAddressResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.DisassociateResolverEndpointIpAddressResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the IpAddress parameter. The -PassThru parameter is deprecated, use -Select '^IpAddress' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Force</name>

          <description>

            <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Force</name>

        <description>

          <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>IpAddress</name>

        <description>

          <para>The IPv4 address that you want to remove from a resolver endpoint. </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.IpAddressUpdate</parameterValue>

        <type>

          <name>Amazon.Route53Resolver.Model.IpAddressUpdate</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the IpAddress parameter. The -PassThru parameter is deprecated, use -Select '^IpAddress' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ResolverEndpointId</name>

        <description>

          <para>The ID of the resolver endpoint that you want to disassociate an IP address from. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoint'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.DisassociateResolverEndpointIpAddressResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.DisassociateResolverEndpointIpAddressResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverEndpoint or Amazon.Route53Resolver.Model.DisassociateResolverEndpointIpAddressResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns an Amazon.Route53Resolver.Model.ResolverEndpoint object.

The service call response (type Amazon.Route53Resolver.Model.DisassociateResolverEndpointIpAddressResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Remove-R53RResolverEndpointIpAddressAssociation.html&amp;tocid=Remove-R53RResolverEndpointIpAddressAssociation</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Remove-R53RResolverRule</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver DeleteResolverRule API operation.</para>

      </description>

      <verb>Remove</verb>

      <noun>R53RResolverRule</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Deletes a resolver rule. Before you can delete a resolver rule, you must disassociate it from all the VPCs that you associated the resolver rule with. For more infomation, see <a>DisassociateResolverRule</a>. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Remove-R53RResolverRule</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResolverRuleId</name>

          <description>

            <para>The ID of the resolver rule that you want to delete. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRule'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.DeleteResolverRuleResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.DeleteResolverRuleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResolverRuleId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRuleId' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Force</name>

          <description>

            <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Force</name>

        <description>

          <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResolverRuleId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRuleId' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResolverRuleId</name>

        <description>

          <para>The ID of the resolver rule that you want to delete. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRule'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.DeleteResolverRuleResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.DeleteResolverRuleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverRule or Amazon.Route53Resolver.Model.DeleteResolverRuleResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns an Amazon.Route53Resolver.Model.ResolverRule object.

The service call response (type Amazon.Route53Resolver.Model.DeleteResolverRuleResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Remove-R53RResolverRule.html&amp;tocid=Remove-R53RResolverRule</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Remove-R53RResolverRuleAssociation</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver DisassociateResolverRule API operation.</para>

      </description>

      <verb>Remove</verb>

      <noun>R53RResolverRuleAssociation</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Removes the association between a specified resolver rule and a specified VPC. 

 <important><para> If you disassociate a resolver rule from a VPC, Resolver stops forwarding DNS queries for the domain name that you specified in the resolver rule.  </para></important> </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Remove-R53RResolverRuleAssociation</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResolverRuleId</name>

          <description>

            <para>The ID of the resolver rule that you want to disassociate from the specified VPC. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>VPCId</name>

          <description>

            <para>The ID of the VPC that you want to disassociate the resolver rule from. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRuleAssociation'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.DisassociateResolverRuleResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.DisassociateResolverRuleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResolverRuleId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRuleId' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Force</name>

          <description>

            <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Force</name>

        <description>

          <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResolverRuleId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRuleId' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResolverRuleId</name>

        <description>

          <para>The ID of the resolver rule that you want to disassociate from the specified VPC. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRuleAssociation'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.DisassociateResolverRuleResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.DisassociateResolverRuleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>VPCId</name>

        <description>

          <para>The ID of the VPC that you want to disassociate the resolver rule from. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverRuleAssociation or Amazon.Route53Resolver.Model.DisassociateResolverRuleResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns an Amazon.Route53Resolver.Model.ResolverRuleAssociation object.

The service call response (type Amazon.Route53Resolver.Model.DisassociateResolverRuleResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Remove-R53RResolverRuleAssociation.html&amp;tocid=Remove-R53RResolverRuleAssociation</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Remove-R53RResourceTag</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver UntagResource API operation.</para>

      </description>

      <verb>Remove</verb>

      <noun>R53RResourceTag</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Removes one or more tags from a specified resource. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Remove-R53RResourceTag</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResourceArn</name>

          <description>

            <para>The Amazon Resource Name (ARN) for the resource that you want to remove tags from. To get the ARN for a resource, use the applicable <code>Get</code> or <code>List</code> command:  

 - <a>GetResolverEndpoint</a> 

 - <a>GetResolverRule</a> 

 - <a>GetResolverRuleAssociation</a> 

 - <a>ListResolverEndpoints</a> 

 - <a>ListResolverRuleAssociations</a> 

 - <a>ListResolverRules</a> </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>TagKey</name>

          <description>

            <para>The tags that you want to remove to the specified resource. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String[]</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.UntagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Force</name>

          <description>

            <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Force</name>

        <description>

          <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResourceArn parameter. The -PassThru parameter is deprecated, use -Select '^ResourceArn' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResourceArn</name>

        <description>

          <para>The Amazon Resource Name (ARN) for the resource that you want to remove tags from. To get the ARN for a resource, use the applicable <code>Get</code> or <code>List</code> command:  

 - <a>GetResolverEndpoint</a> 

 - <a>GetResolverRule</a> 

 - <a>GetResolverRuleAssociation</a> 

 - <a>ListResolverEndpoints</a> 

 - <a>ListResolverRuleAssociations</a> 

 - <a>ListResolverRules</a> </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.UntagResourceResponse). Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>TagKey</name>

        <description>

          <para>The tags that you want to remove to the specified resource. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String[]</parameterValue>

        <type>

          <name>System.String[]</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>None or Amazon.Route53Resolver.Model.UntagResourceResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet does not generate any output.The service response (type Amazon.Route53Resolver.Model.UntagResourceResponse) can be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Remove-R53RResourceTag.html&amp;tocid=Remove-R53RResourceTag</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Set-R53RResolverRulePolicy</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver PutResolverRulePolicy API operation.</para>

      </description>

      <verb>Set</verb>

      <noun>R53RResolverRulePolicy</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Specifies the Resolver operations and resources that you want to allow another AWS account to be able to use. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Set-R53RResolverRulePolicy</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResolverRulePolicy</name>

          <description>

            <para>An AWS Identity and Access Management policy statement that lists the permissions that you want to grant to another AWS account. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Arn</name>

          <description>

            <para>The Amazon Resource Name (ARN) of the account that you want to grant permissions to. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ReturnValue'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.PutResolverRulePolicyResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.PutResolverRulePolicyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResolverRulePolicy parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRulePolicy' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Force</name>

          <description>

            <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Arn</name>

        <description>

          <para>The Amazon Resource Name (ARN) of the account that you want to grant permissions to. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Force</name>

        <description>

          <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResolverRulePolicy parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRulePolicy' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResolverRulePolicy</name>

        <description>

          <para>An AWS Identity and Access Management policy statement that lists the permissions that you want to grant to another AWS account. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ReturnValue'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.PutResolverRulePolicyResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.PutResolverRulePolicyResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>System.Boolean or Amazon.Route53Resolver.Model.PutResolverRulePolicyResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns a System.Boolean object.

The service call response (type Amazon.Route53Resolver.Model.PutResolverRulePolicyResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Set-R53RResolverRulePolicy.html&amp;tocid=Set-R53RResolverRulePolicy</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Update-R53RResolverEndpoint</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver UpdateResolverEndpoint API operation.</para>

      </description>

      <verb>Update</verb>

      <noun>R53RResolverEndpoint</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Updates the name of an inbound or an outbound resolver endpoint. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Update-R53RResolverEndpoint</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResolverEndpointId</name>

          <description>

            <para>The ID of the resolver endpoint that you want to update. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Name</name>

          <description>

            <para>The name of the resolver endpoint that you want to update. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoint'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.UpdateResolverEndpointResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.UpdateResolverEndpointResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResolverEndpointId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverEndpointId' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Force</name>

          <description>

            <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Force</name>

        <description>

          <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Name</name>

        <description>

          <para>The name of the resolver endpoint that you want to update. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResolverEndpointId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverEndpointId' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResolverEndpointId</name>

        <description>

          <para>The ID of the resolver endpoint that you want to update. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverEndpoint'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.UpdateResolverEndpointResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.UpdateResolverEndpointResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverEndpoint or Amazon.Route53Resolver.Model.UpdateResolverEndpointResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns an Amazon.Route53Resolver.Model.ResolverEndpoint object.

The service call response (type Amazon.Route53Resolver.Model.UpdateResolverEndpointResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Update-R53RResolverEndpoint.html&amp;tocid=Update-R53RResolverEndpoint</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

  <command xmlns:maml="http://schemas.microsoft.com/maml/2004/10" xmlns:command="http://schemas.microsoft.com/maml/dev/command/2004/10" xmlns:dev="http://schemas.microsoft.com/maml/dev/2004/10">

    <details>

      <name>Update-R53RResolverRule</name>

      <description>

        <para>Calls the Amazon Route 53 Resolver UpdateResolverRule API operation.</para>

      </description>

      <verb>Update</verb>

      <noun>R53RResolverRule</noun>

      <copyright>

        <para>&amp;copy; Copyright 2012 - 2019 Amazon.com, Inc.or its affiliates.All Rights Reserved.</para>

      </copyright>

    </details>

    <description>

      <para>Updates settings for a specified resolver rule. <code>ResolverRuleId</code> is required, and all other parameters are optional. If you don't specify a parameter, it retains its current value. </para>

    </description>

    <syntax>

      <syntaxItem>

        <name>Update-R53RResolverRule</name>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

          <name>ResolverRuleId</name>

          <description>

            <para>The ID of the resolver rule that you want to update. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Config</name>

          <description>

            <para>The new settings for the resolver rule. </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.ResolverRuleConfig</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Select</name>

          <description>

            <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRule'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.UpdateResolverRuleResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.UpdateResolverRuleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>PassThru</name>

          <description>

            <para>Changes the cmdlet behavior to return the value passed to the ResolverRuleId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRuleId' instead. This parameter will be removed in a future version. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Force</name>

          <description>

            <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>EndpointUrl</name>

          <description>

            <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>Region</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>AccessKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SecretKey</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>SessionToken</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileName</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

          <name>ProfileLocation</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

          </description>

          <parameterValue required="true" variableLength="false">System.String</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>Credential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

          </description>

          <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        </parameter>

        <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

          <name>NetworkCredential</name>

          <description>

            <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

          </description>

          <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        </parameter>

      </syntaxItem>

    </syntax>

    <parameters>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>AccessKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.AccessKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Config</name>

        <description>

          <para>The new settings for the resolver rule. </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Route53Resolver.Model.ResolverRuleConfig</parameterValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverRuleConfig</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>Credential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Credential </para>

        </description>

        <parameterValue required="true" variableLength="false">Amazon.Runtime.AWSCredentials</parameterValue>

        <type>

          <name>Amazon.Runtime.AWSCredentials</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>EndpointUrl</name>

        <description>

          <para>Amazon.PowerShell.Common.ServiceCmdlet.EndpointUrl </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Force</name>

        <description>

          <para>This parameter overrides confirmation prompts to force  the cmdlet to continue its operation. This parameter should always be used with caution. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="Named">

        <name>NetworkCredential</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.NetworkCredential </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.PSCredential</parameterValue>

        <type>

          <name>System.Management.Automation.PSCredential</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>PassThru</name>

        <description>

          <para>Changes the cmdlet behavior to return the value passed to the ResolverRuleId parameter. The -PassThru parameter is deprecated, use -Select '^ResolverRuleId' instead. This parameter will be removed in a future version. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Management.Automation.SwitchParameter</parameterValue>

        <type>

          <name>System.Management.Automation.SwitchParameter</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileLocation</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileLocation </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>ProfileName</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.ProfileName </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Region</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.Region </para>

        </description>

        <parameterValue required="true" variableLength="false">System.Object</parameterValue>

        <type>

          <name>System.Object</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="True" variableLength="false" globbing="false" pipelineInput="True (ByValue, ByPropertyName)" position="1">

        <name>ResolverRuleId</name>

        <description>

          <para>The ID of the resolver rule that you want to update. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SecretKey</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SecretKey </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>Select</name>

        <description>

          <para>Use the -Select parameter to control the cmdlet output. The default value is 'ResolverRule'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53Resolver.Model.UpdateResolverRuleResponse). Specifying the name of a property of type Amazon.Route53Resolver.Model.UpdateResolverRuleResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value. </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

      <parameter required="False" variableLength="false" globbing="false" pipelineInput="True (ByPropertyName)" position="Named">

        <name>SessionToken</name>

        <description>

          <para>Amazon.PowerShell.Common.AWSCommonArgumentsCmdlet.SessionToken </para>

        </description>

        <parameterValue required="true" variableLength="false">System.String</parameterValue>

        <type>

          <name>System.String</name>

          <uri />

        </type>

        <defaultValue>None</defaultValue>

      </parameter>

    </parameters>

    <returnValues>

      <returnValue>

        <type>

          <name>Amazon.Route53Resolver.Model.ResolverRule or Amazon.Route53Resolver.Model.UpdateResolverRuleResponse</name>

          <uri />

          <description />

        </type>

        <description>

          <para>This cmdlet returns an Amazon.Route53Resolver.Model.ResolverRule object.

The service call response (type Amazon.Route53Resolver.Model.UpdateResolverRuleResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.</para>

        </description>

      </returnValue>

    </returnValues>

    <relatedLinks>

      <navigationLink>

        <linkText>Online version:</linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/index.html?page=Update-R53RResolverRule.html&amp;tocid=Update-R53RResolverRule</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Common credential and region parameters: </linkText>

        <uri>http://docs.aws.amazon.com/powershell/latest/reference/items/pstoolsref-commonparams.html</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Developer Guide:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/DeveloperGuide/</uri>

      </navigationLink>

      <navigationLink>

        <linkText>Service API Reference:</linkText>

        <uri>https://docs.aws.amazon.com/Route53/latest/APIReference/API_Operations_Amazon_Route_53_Resolver.html</uri>

      </navigationLink>

    </relatedLinks>

  </command>

</helpItems>