AWS.Tools.SQS.XML

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>AWS.Tools.SQS</name>
    </assembly>
    <members>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.AddSQSPermissionCmdlet">
            <summary>
            Adds a permission to a queue for a specific <a href="https://docs.aws.amazon.com/general/latest/gr/glos-chap.html#P">principal</a>.
            This allows sharing access to the queue.
             
              
            <para>
            When you create a queue, you have full control access rights for the queue. Only you,
            the owner of the queue, can grant or deny permissions to the queue. For more information
            about these permissions, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-writing-an-sqs-policy.html#write-messages-to-shared-queue">Allow
            Developers to Write Messages to a Shared Queue</a> in the <i>Amazon SQS Developer
            Guide</i>.
            </para><note><ul><li><para><c>AddPermission</c> generates a policy for you. You can use <c><a>SetQueueAttributes</a></c> to upload your policy. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-creating-custom-policies.html">Using
            Custom Policies with the Amazon SQS Access Policy Language</a> in the <i>Amazon SQS
            Developer Guide</i>.
            </para></li><li><para>
            An Amazon SQS policy can have a maximum of seven actions per statement.
            </para></li><li><para>
            To remove the ability to change queue permissions, you must deny permission to the
            <c>AddPermission</c>, <c>RemovePermission</c>, and <c>SetQueueAttributes</c> actions
            in your IAM policy.
            </para></li><li><para>
            Amazon SQS <c>AddPermission</c> does not support adding a non-account principal.
            </para></li></ul></note><note><para>
            Cross-account permissions don't apply to this action. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-customer-managed-policy-examples.html#grant-cross-account-permissions-to-role-and-user-name">Grant
            cross-account permissions to a role and a username</a> in the <i>Amazon SQS Developer
            Guide</i>.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.AddSQSPermissionCmdlet.Action">
            <summary>
            <para>
            <para>The action the client wants to allow for the specified principal. Valid values: the
            name of any action or <c>*</c>.</para><para>For more information about these actions, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-overview-of-managing-access.html">Overview
            of Managing Access Permissions to Your Amazon Simple Queue Service Resource</a> in
            the <i>Amazon SQS Developer Guide</i>.</para><para>Specifying <c>SendMessage</c>, <c>DeleteMessage</c>, or <c>ChangeMessageVisibility</c>
            for <c>ActionName.n</c> also grants permissions for the corresponding batch versions
            of those actions: <c>SendMessageBatch</c>, <c>DeleteMessageBatch</c>, and <c>ChangeMessageVisibilityBatch</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.AddSQSPermissionCmdlet.AWSAccountId">
            <summary>
            <para>
            <para>The Amazon Web Services account numbers of the <a href="https://docs.aws.amazon.com/general/latest/gr/glos-chap.html#P">principals</a>
            who are to receive permission. For information about locating the Amazon Web Services
            account identification, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-making-api-requests.html#sqs-api-request-authentication">Your
            Amazon Web Services Identifiers</a> in the <i>Amazon SQS Developer Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.AddSQSPermissionCmdlet.Label">
            <summary>
            <para>
            <para>The unique identification of the permission you're setting (for example, <c>AliceSendMessage</c>).
            Maximum 80 characters. Allowed characters include alphanumeric characters, hyphens
            (<c>-</c>), and underscores (<c>_</c>).</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.AddSQSPermissionCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the Amazon SQS queue to which permissions are added.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.AddSQSPermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.AddPermissionResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.AddSQSPermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.AddSQSPermissionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.AddSQSResourceTagCmdlet">
            <summary>
            Add cost allocation tags to the specified Amazon SQS queue. For an overview, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-queue-tags.html">Tagging
            Your Amazon SQS Queues</a> in the <i>Amazon SQS Developer Guide</i>.
             
              
            <para>
            When you use queue tags, keep the following guidelines in mind:
            </para><ul><li><para>
            Adding more than 50 tags to a queue isn't recommended.
            </para></li><li><para>
            Tags don't have any semantic meaning. Amazon SQS interprets tags as character strings.
            </para></li><li><para>
            Tags are case-sensitive.
            </para></li><li><para>
            A new tag with a key identical to that of an existing tag overwrites the existing
            tag.
            </para></li></ul><para>
            For a full list of tag restrictions, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-limits.html#limits-queues">Quotas
            related to queues</a> in the <i>Amazon SQS Developer Guide</i>.
            </para><note><para>
            Cross-account permissions don't apply to this action. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-customer-managed-policy-examples.html#grant-cross-account-permissions-to-role-and-user-name">Grant
            cross-account permissions to a role and a username</a> in the <i>Amazon SQS Developer
            Guide</i>.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.AddSQSResourceTagCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the queue.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.AddSQSResourceTagCmdlet.Tag">
            <summary>
            <para>
            <para>The list of tags to be added to the specified queue.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.AddSQSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.TagQueueResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.AddSQSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.AddSQSResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.ClearSQSQueueCmdlet">
            <summary>
            Deletes available messages in a queue (including in-flight messages) specified by
            the <c>QueueURL</c> parameter.
             
             <important><para>
            When you use the <c>PurgeQueue</c> action, you can't retrieve any messages deleted
            from a queue.
            </para><para>
            The message deletion process takes up to 60 seconds. We recommend waiting for 60 seconds
            regardless of your queue's size.
            </para></important><para>
            Messages sent to the queue <i>before</i> you call <c>PurgeQueue</c> might be received
            but are deleted within the next minute.
            </para><para>
            Messages sent to the queue <i>after</i> you call <c>PurgeQueue</c> might be deleted
            while the queue is being purged.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ClearSQSQueueCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the queue from which the <c>PurgeQueue</c> action deletes messages.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ClearSQSQueueCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.PurgeQueueResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ClearSQSQueueCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ClearSQSQueueCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.EditSQSMessageVisibilityCmdlet">
            <summary>
            Changes the visibility timeout of a specified message in a queue to a new value. The
            default visibility timeout for a message is 30 seconds. The minimum is 0 seconds.
            The maximum is 12 hours. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility
            Timeout</a> in the <i>Amazon SQS Developer Guide</i>.
             
              
            <para>
            For example, if the default timeout for a queue is 60 seconds, 15 seconds have elapsed
            since you received the message, and you send a ChangeMessageVisibility call with <c>VisibilityTimeout</c>
            set to 10 seconds, the 10 seconds begin to count from the time that you make the <c>ChangeMessageVisibility</c>
            call. Thus, any attempt to change the visibility timeout or to delete that message
            10 seconds after you initially change the visibility timeout (a total of 25 seconds)
            might result in an error.
            </para><para>
            An Amazon SQS message has three basic states:
            </para><ol><li><para>
            Sent to a queue by a producer.
            </para></li><li><para>
            Received from the queue by a consumer.
            </para></li><li><para>
            Deleted from the queue.
            </para></li></ol><para>
            A message is considered to be <i>stored</i> after it is sent to a queue by a producer,
            but not yet received from the queue by a consumer (that is, between states 1 and 2).
            There is no limit to the number of stored messages. A message is considered to be
            <i>in flight</i> after it is received from a queue by a consumer, but not yet deleted
            from the queue (that is, between states 2 and 3). There is a limit to the number of
            in flight messages.
            </para><para>
            Limits that apply to in flight messages are unrelated to the <i>unlimited</i> number
            of stored messages.
            </para><para>
            For most standard queues (depending on queue traffic and message backlog), there can
            be a maximum of approximately 120,000 in flight messages (received from a queue by
            a consumer, but not yet deleted from the queue). If you reach this limit, Amazon SQS
            returns the <c>OverLimit</c> error message. To avoid reaching the limit, you should
            delete messages from the queue after they're processed. You can also increase the
            number of queues you use to process your messages. To request a limit increase, <a href="https://console.aws.amazon.com/support/home#/case/create?issueType=service-limit-increase&amp;limitType=service-code-sqs">file
            a support request</a>.
            </para><para>
            For FIFO queues, there can be a maximum of 20,000 in flight messages (received from
            a queue by a consumer, but not yet deleted from the queue). If you reach this limit,
            Amazon SQS returns no error messages.
            </para><important><para>
            If you attempt to set the <c>VisibilityTimeout</c> to a value greater than the maximum
            time left, Amazon SQS returns an error. Amazon SQS doesn't automatically recalculate
            and increase the timeout to the maximum remaining time.
            </para><para>
            Unlike with a queue, when you change the visibility timeout for a specific message
            the timeout value is applied immediately but isn't saved in memory for that message.
            If you don't delete a message after it is received, the visibility timeout for the
            message reverts to the original timeout value (not to the value you set using the
            <c>ChangeMessageVisibility</c> action) the next time the message is received.
            </para></important>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.EditSQSMessageVisibilityCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the Amazon SQS queue whose message's visibility is changed.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.EditSQSMessageVisibilityCmdlet.ReceiptHandle">
            <summary>
            <para>
            <para>The receipt handle associated with the message, whose visibility timeout is changed.
            This parameter is returned by the <c><a>ReceiveMessage</a></c> action.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.EditSQSMessageVisibilityCmdlet.VisibilityTimeout">
            <summary>
            <para>
            <para>The new value for the message's visibility timeout (in seconds). Values range: <c>0</c>
            to <c>43200</c>. Maximum: 12 hours.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.EditSQSMessageVisibilityCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.ChangeMessageVisibilityResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.EditSQSMessageVisibilityCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.EditSQSMessageVisibilityCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.EditSQSMessageVisibilityBatchCmdlet">
            <summary>
            Changes the visibility timeout of multiple messages. This is a batch version of <c><a>ChangeMessageVisibility</a>.</c> The result of the action on each message is reported
            individually in the response. You can send up to 10 <c><a>ChangeMessageVisibility</a></c> requests with each <c>ChangeMessageVisibilityBatch</c> action.
             
             <important><para>
            Because the batch request can result in a combination of successful and unsuccessful
            actions, you should check for batch errors even when the call returns an HTTP status
            code of <c>200</c>.
            </para></important>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.EditSQSMessageVisibilityBatchCmdlet.Entry">
            <summary>
            <para>
            <para>Lists the receipt handles of the messages for which the visibility timeout must be
            changed.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.EditSQSMessageVisibilityBatchCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the Amazon SQS queue whose messages' visibility is changed.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.EditSQSMessageVisibilityBatchCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.ChangeMessageVisibilityBatchResponse).
            Specifying the name of a property of type Amazon.SQS.Model.ChangeMessageVisibilityBatchResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.EditSQSMessageVisibilityBatchCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.EditSQSMessageVisibilityBatchCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.GetSQSDeadLetterSourceQueueCmdlet">
            <summary>
            Returns a list of your queues that have the <c>RedrivePolicy</c> queue attribute configured
            with a dead-letter queue.
             
              
            <para>
             The <c>ListDeadLetterSourceQueues</c> methods supports pagination. Set parameter
            <c>MaxResults</c> in the request to specify the maximum number of results to be returned
            in the response. If you do not set <c>MaxResults</c>, the response includes a maximum
            of 1,000 results. If you set <c>MaxResults</c> and there are additional results to
            display, the response includes a value for <c>NextToken</c>. Use <c>NextToken</c>
            as a parameter in your next request to <c>ListDeadLetterSourceQueues</c> to receive
            the next page of results.
            </para><para>
            For more information about using dead-letter queues, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">Using
            Amazon SQS Dead-Letter Queues</a> in the <i>Amazon SQS Developer Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSDeadLetterSourceQueueCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of a dead-letter queue.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSDeadLetterSourceQueueCmdlet.MaxResult">
            <summary>
            <para>
            <para>Maximum number of results to include in the response. Value range is 1 to 1000. You
            must set <c>MaxResults</c> to receive a value for <c>NextToken</c> in the response.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSDeadLetterSourceQueueCmdlet.NextToken">
            <summary>
            <para>
            <para>Pagination token to request the next set of results.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSDeadLetterSourceQueueCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'QueueUrls'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.ListDeadLetterSourceQueuesResponse).
            Specifying the name of a property of type Amazon.SQS.Model.ListDeadLetterSourceQueuesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSDeadLetterSourceQueueCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.GetSQSMessageMoveTaskCmdlet">
            <summary>
            Gets the most recent message movement tasks (up to 10) under a specific source queue.
             
             <note><ul><li><para>
            This action is currently limited to supporting message redrive from <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter
            queues (DLQs)</a> only. In this context, the source queue is the dead-letter queue
            (DLQ), while the destination queue can be the original source queue (from which the
            messages were driven to the dead-letter-queue), or a custom destination queue.
            </para></li><li><para>
            Currently, only standard queues are supported.
            </para></li><li><para>
            Only one active message movement task is supported per queue at any given time.
            </para></li></ul></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSMessageMoveTaskCmdlet.SourceArn">
            <summary>
            <para>
            <para>The ARN of the queue whose message movement tasks are to be listed.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSMessageMoveTaskCmdlet.MaxResult">
            <summary>
            <para>
            <para>The maximum number of results to include in the response. The default is 1, which
            provides the most recent message movement task. The upper limit is 10.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSMessageMoveTaskCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Results'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.ListMessageMoveTasksResponse).
            Specifying the name of a property of type Amazon.SQS.Model.ListMessageMoveTasksResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSMessageMoveTaskCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the SourceArn parameter.
            The -PassThru parameter is deprecated, use -Select '^SourceArn' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueCmdlet">
            <summary>
            Returns a list of your queues in the current region. The response includes a maximum
            of 1,000 results. If you specify a value for the optional <c>QueueNamePrefix</c> parameter,
            only queues with a name that begins with the specified value are returned.
             
              
            <para>
             The <c>listQueues</c> methods supports pagination. Set parameter <c>MaxResults</c>
            in the request to specify the maximum number of results to be returned in the response.
            If you do not set <c>MaxResults</c>, the response includes a maximum of 1,000 results.
            If you set <c>MaxResults</c> and there are additional results to display, the response
            includes a value for <c>NextToken</c>. Use <c>NextToken</c> as a parameter in your
            next request to <c>listQueues</c> to receive the next page of results.
            </para><note><para>
            Cross-account permissions don't apply to this action. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-customer-managed-policy-examples.html#grant-cross-account-permissions-to-role-and-user-name">Grant
            cross-account permissions to a role and a username</a> in the <i>Amazon SQS Developer
            Guide</i>.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueCmdlet.QueueNamePrefix">
            <summary>
            <para>
            <para>A string to use for filtering the list results. Only those queues whose name begins
            with the specified string are returned.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueCmdlet.MaxResult">
            <summary>
            <para>
            <para>Maximum number of results to include in the response. Value range is 1 to 1000. You
            must set <c>MaxResults</c> to receive a value for <c>NextToken</c> in the response.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueCmdlet.NextToken">
            <summary>
            <para>
            <para>Pagination token to request the next set of results.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'QueueUrls'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.ListQueuesResponse).
            Specifying the name of a property of type Amazon.SQS.Model.ListQueuesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueNamePrefix parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueNamePrefix' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueAttributeCmdlet">
            <summary>
            Gets attributes for the specified queue.
             
             <note><para>
            To determine whether a queue is <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO</a>,
            you can check whether <c>QueueName</c> ends with the <c>.fifo</c> suffix.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueAttributeCmdlet.AttributeName">
            <summary>
            <para>
            <para>A list of attributes for which to retrieve information.</para><para>The <c>AttributeNames</c> parameter is optional, but if you don't specify values for
            this parameter, the request returns empty results.</para><note><para>In the future, new attributes might be added. If you write code that calls this action,
            we recommend that you structure your code so that it can handle new attributes gracefully.</para></note><para>The following attributes are supported:</para><important><para>The <c>ApproximateNumberOfMessagesDelayed</c>, <c>ApproximateNumberOfMessagesNotVisible</c>,
            and <c>ApproximateNumberOfMessages</c> metrics may not achieve consistency until at
            least 1 minute after the producers stop sending messages. This period is required
            for the queue metadata to reach eventual consistency. </para></important><ul><li><para><c>All</c> – Returns all values. </para></li><li><para><c>ApproximateNumberOfMessages</c> – Returns the approximate number of messages available
            for retrieval from the queue.</para></li><li><para><c>ApproximateNumberOfMessagesDelayed</c> – Returns the approximate number of messages
            in the queue that are delayed and not available for reading immediately. This can
            happen when the queue is configured as a delay queue or when a message has been sent
            with a delay parameter.</para></li><li><para><c>ApproximateNumberOfMessagesNotVisible</c> – Returns the approximate number of
            messages that are in flight. Messages are considered to be <i>in flight</i> if they
            have been sent to a client but have not yet been deleted or have not yet reached the
            end of their visibility window. </para></li><li><para><c>CreatedTimestamp</c> – Returns the time when the queue was created in seconds
            (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch time</a>).</para></li><li><para><c>DelaySeconds</c> – Returns the default delay on the queue in seconds.</para></li><li><para><c>LastModifiedTimestamp</c> – Returns the time when the queue was last changed in
            seconds (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch time</a>).</para></li><li><para><c>MaximumMessageSize</c> – Returns the limit of how many bytes a message can contain
            before Amazon SQS rejects it.</para></li><li><para><c>MessageRetentionPeriod</c> – Returns the length of time, in seconds, for which
            Amazon SQS retains a message. When you change a queue's attributes, the change can
            take up to 60 seconds for most of the attributes to propagate throughout the Amazon
            SQS system. Changes made to the <c>MessageRetentionPeriod</c> attribute can take up
            to 15 minutes and will impact existing messages in the queue potentially causing them
            to be expired and deleted if the <c>MessageRetentionPeriod</c> is reduced below the
            age of existing messages.</para></li><li><para><c>Policy</c> – Returns the policy of the queue.</para></li><li><para><c>QueueArn</c> – Returns the Amazon resource name (ARN) of the queue.</para></li><li><para><c>ReceiveMessageWaitTimeSeconds</c> – Returns the length of time, in seconds, for
            which the <c>ReceiveMessage</c> action waits for a message to arrive. </para></li><li><para><c>VisibilityTimeout</c> – Returns the visibility timeout for the queue. For more
            information about the visibility timeout, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility
            Timeout</a> in the <i>Amazon SQS Developer Guide</i>. </para></li></ul><para>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter
            queues:</a></para><ul><li><para><c>RedrivePolicy</c> – The string that includes the parameters for the dead-letter
            queue functionality of the source queue as a JSON object. The parameters are as follows:</para><ul><li><para><c>deadLetterTargetArn</c> – The Amazon Resource Name (ARN) of the dead-letter queue
            to which Amazon SQS moves messages after the value of <c>maxReceiveCount</c> is exceeded.</para></li><li><para><c>maxReceiveCount</c> – The number of times a message is delivered to the source
            queue before being moved to the dead-letter queue. Default: 10. When the <c>ReceiveCount</c>
            for a message exceeds the <c>maxReceiveCount</c> for a queue, Amazon SQS moves the
            message to the dead-letter-queue.</para></li></ul></li><li><para><c>RedriveAllowPolicy</c> – The string that includes the parameters for the permissions
            for the dead-letter queue redrive permission and which source queues can specify dead-letter
            queues as a JSON object. The parameters are as follows:</para><ul><li><para><c>redrivePermission</c> – The permission type that defines which source queues can
            specify the current queue as the dead-letter queue. Valid values are:</para><ul><li><para><c>allowAll</c> – (Default) Any source queues in this Amazon Web Services account
            in the same Region can specify this queue as the dead-letter queue.</para></li><li><para><c>denyAll</c> – No source queues can specify this queue as the dead-letter queue.</para></li><li><para><c>byQueue</c> – Only queues specified by the <c>sourceQueueArns</c> parameter can
            specify this queue as the dead-letter queue.</para></li></ul></li><li><para><c>sourceQueueArns</c> – The Amazon Resource Names (ARN)s of the source queues that
            can specify this queue as the dead-letter queue and redrive messages. You can specify
            this parameter only when the <c>redrivePermission</c> parameter is set to <c>byQueue</c>.
            You can specify up to 10 source queue ARNs. To allow more than 10 source queues to
            specify dead-letter queues, set the <c>redrivePermission</c> parameter to <c>allowAll</c>.</para></li></ul></li></ul><note><para>The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter
            queue of a standard queue must also be a standard queue.</para></note><para>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html">server-side-encryption</a>:</para><ul><li><para><c>KmsMasterKeyId</c> – Returns the ID of an Amazon Web Services managed customer
            master key (CMK) for Amazon SQS or a custom CMK. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms">Key
            Terms</a>. </para></li><li><para><c>KmsDataKeyReusePeriodSeconds</c> – Returns the length of time, in seconds, for
            which Amazon SQS can reuse a data key to encrypt or decrypt messages before calling
            KMS again. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work">How
            Does the Data Key Reuse Period Work?</a>. </para></li><li><para><c>SqsManagedSseEnabled</c> – Returns information about whether the queue is using
            SSE-SQS encryption using SQS owned encryption keys. Only one server-side encryption
            option is supported per queue (for example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a>
            or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</para></li></ul><para>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO
            (first-in-first-out) queues</a>:</para><ul><li><para><c>FifoQueue</c> – Returns information about whether the queue is FIFO. For more
            information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-understanding-logic.html">FIFO
            queue logic</a> in the <i>Amazon SQS Developer Guide</i>.</para><note><para>To determine whether a queue is <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO</a>,
            you can check whether <c>QueueName</c> ends with the <c>.fifo</c> suffix.</para></note></li><li><para><c>ContentBasedDeduplication</c> – Returns whether content-based deduplication is
            enabled for the queue. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">Exactly-once
            processing</a> in the <i>Amazon SQS Developer Guide</i>. </para></li></ul><para>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html">high
            throughput for FIFO queues</a>:</para><ul><li><para><c>DeduplicationScope</c> – Specifies whether message deduplication occurs at the
            message group or queue level. Valid values are <c>messageGroup</c> and <c>queue</c>.</para></li><li><para><c>FifoThroughputLimit</c> – Specifies whether the FIFO queue throughput quota applies
            to the entire queue or per message group. Valid values are <c>perQueue</c> and <c>perMessageGroupId</c>.
            The <c>perMessageGroupId</c> value is allowed only when the value for <c>DeduplicationScope</c>
            is <c>messageGroup</c>.</para></li></ul><para>To enable high throughput for FIFO queues, do the following:</para><ul><li><para>Set <c>DeduplicationScope</c> to <c>messageGroup</c>.</para></li><li><para>Set <c>FifoThroughputLimit</c> to <c>perMessageGroupId</c>.</para></li></ul><para>If you set these attributes to anything other than the values shown for enabling high
            throughput, normal throughput is in effect and deduplication occurs as specified.</para><para>For information on throughput quotas, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html">Quotas
            related to messages</a> in the <i>Amazon SQS Developer Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueAttributeCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the Amazon SQS queue whose attribute information is retrieved.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueAttributeCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.GetQueueAttributesResponse).
            Specifying the name of a property of type Amazon.SQS.Model.GetQueueAttributesResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueAttributeCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueUrlCmdlet">
            <summary>
            Returns the URL of an existing Amazon SQS queue.
             
              
            <para>
            To access a queue that belongs to another AWS account, use the <c>QueueOwnerAWSAccountId</c>
            parameter to specify the account ID of the queue's owner. The queue's owner must grant
            you permission to access the queue. For more information about shared queue access,
            see <c><a>AddPermission</a></c> or see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-writing-an-sqs-policy.html#write-messages-to-shared-queue">Allow
            Developers to Write Messages to a Shared Queue</a> in the <i>Amazon SQS Developer
            Guide</i>.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueUrlCmdlet.QueueName">
            <summary>
            <para>
            <para>The name of the queue whose URL must be fetched. Maximum 80 characters. Valid values:
            alphanumeric characters, hyphens (<c>-</c>), and underscores (<c>_</c>).</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueUrlCmdlet.QueueOwnerAWSAccountId">
            <summary>
            <para>
            <para>The Amazon Web Services account ID of the account that created the queue.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueUrlCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'QueueUrl'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.GetQueueUrlResponse).
            Specifying the name of a property of type Amazon.SQS.Model.GetQueueUrlResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSQueueUrlCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueName parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.GetSQSResourceTagCmdlet">
            <summary>
            List all cost allocation tags added to the specified Amazon SQS queue. For an overview,
            see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-queue-tags.html">Tagging
            Your Amazon SQS Queues</a> in the <i>Amazon SQS Developer Guide</i>.
             
             <note><para>
            Cross-account permissions don't apply to this action. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-customer-managed-policy-examples.html#grant-cross-account-permissions-to-role-and-user-name">Grant
            cross-account permissions to a role and a username</a> in the <i>Amazon SQS Developer
            Guide</i>.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSResourceTagCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the queue.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Tags'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.ListQueueTagsResponse).
            Specifying the name of a property of type Amazon.SQS.Model.ListQueueTagsResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.GetSQSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.NewSQSQueueCmdlet">
            <summary>
            Creates a new standard or FIFO queue. You can pass one or more attributes in the request.
            Keep the following in mind:
             
             <ul><li><para>
            If you don't specify the <c>FifoQueue</c> attribute, Amazon SQS creates a standard
            queue.
            </para><note><para>
            You can't change the queue type after you create it and you can't convert an existing
            standard queue into a FIFO queue. You must either create a new FIFO queue for your
            application or delete your existing standard queue and recreate it as a FIFO queue.
            For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html#FIFO-queues-moving">Moving
            From a Standard Queue to a FIFO Queue</a> in the <i>Amazon SQS Developer Guide</i>.
             
            </para></note></li><li><para>
            If you don't provide a value for an attribute, the queue is created with the default
            value for the attribute.
            </para></li><li><para>
            If you delete a queue, you must wait at least 60 seconds before creating a queue with
            the same name.
            </para></li></ul><para>
            To successfully create a new queue, you must provide a queue name that adheres to
            the <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/limits-queues.html">limits
            related to queues</a> and is unique within the scope of your queues.
            </para><note><para>
            After you create a queue, you must wait at least one second after the queue is created
            to be able to use the queue.
            </para></note><para>
            To get the queue URL, use the <c><a>GetQueueUrl</a></c> action. <c><a>GetQueueUrl</a></c> requires only the <c>QueueName</c> parameter. be aware of existing queue names:
            </para><ul><li><para>
            If you provide the name of an existing queue along with the exact names and values
            of all the queue's attributes, <c>CreateQueue</c> returns the queue URL for the existing
            queue.
            </para></li><li><para>
            If the queue name, attribute names, or attribute values don't match an existing queue,
            <c>CreateQueue</c> returns an error.
            </para></li></ul><note><para>
            Cross-account permissions don't apply to this action. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-customer-managed-policy-examples.html#grant-cross-account-permissions-to-role-and-user-name">Grant
            cross-account permissions to a role and a username</a> in the <i>Amazon SQS Developer
            Guide</i>.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.NewSQSQueueCmdlet.Attribute">
            <summary>
            <para>
            <para>A map of attributes with their corresponding values.</para><para>The following lists the names, descriptions, and values of the special request parameters
            that the <c>CreateQueue</c> action uses:</para><ul><li><para><c>DelaySeconds</c> – The length of time, in seconds, for which the delivery of all
            messages in the queue is delayed. Valid values: An integer from 0 to 900 seconds (15
            minutes). Default: 0. </para></li><li><para><c>MaximumMessageSize</c> – The limit of how many bytes a message can contain before
            Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) to 262,144
            bytes (256 KiB). Default: 262,144 (256 KiB). </para></li><li><para><c>MessageRetentionPeriod</c> – The length of time, in seconds, for which Amazon
            SQS retains a message. Valid values: An integer from 60 seconds (1 minute) to 1,209,600
            seconds (14 days). Default: 345,600 (4 days). When you change a queue's attributes,
            the change can take up to 60 seconds for most of the attributes to propagate throughout
            the Amazon SQS system. Changes made to the <c>MessageRetentionPeriod</c> attribute
            can take up to 15 minutes and will impact existing messages in the queue potentially
            causing them to be expired and deleted if the <c>MessageRetentionPeriod</c> is reduced
            below the age of existing messages.</para></li><li><para><c>Policy</c> – The queue's policy. A valid Amazon Web Services policy. For more
            information about policy structure, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html">Overview
            of Amazon Web Services IAM Policies</a> in the <i>IAM User Guide</i>. </para></li><li><para><c>ReceiveMessageWaitTimeSeconds</c> – The length of time, in seconds, for which
            a <c><a>ReceiveMessage</a></c> action waits for a message to arrive. Valid values:
            An integer from 0 to 20 (seconds). Default: 0. </para></li><li><para><c>VisibilityTimeout</c> – The visibility timeout for the queue, in seconds. Valid
            values: An integer from 0 to 43,200 (12 hours). Default: 30. For more information
            about the visibility timeout, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility
            Timeout</a> in the <i>Amazon SQS Developer Guide</i>.</para></li></ul><para>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter
            queues:</a></para><ul><li><para><c>RedrivePolicy</c> – The string that includes the parameters for the dead-letter
            queue functionality of the source queue as a JSON object. The parameters are as follows:</para><ul><li><para><c>deadLetterTargetArn</c> – The Amazon Resource Name (ARN) of the dead-letter queue
            to which Amazon SQS moves messages after the value of <c>maxReceiveCount</c> is exceeded.</para></li><li><para><c>maxReceiveCount</c> – The number of times a message is delivered to the source
            queue before being moved to the dead-letter queue. Default: 10. When the <c>ReceiveCount</c>
            for a message exceeds the <c>maxReceiveCount</c> for a queue, Amazon SQS moves the
            message to the dead-letter-queue.</para></li></ul></li><li><para><c>RedriveAllowPolicy</c> – The string that includes the parameters for the permissions
            for the dead-letter queue redrive permission and which source queues can specify dead-letter
            queues as a JSON object. The parameters are as follows:</para><ul><li><para><c>redrivePermission</c> – The permission type that defines which source queues can
            specify the current queue as the dead-letter queue. Valid values are:</para><ul><li><para><c>allowAll</c> – (Default) Any source queues in this Amazon Web Services account
            in the same Region can specify this queue as the dead-letter queue.</para></li><li><para><c>denyAll</c> – No source queues can specify this queue as the dead-letter queue.</para></li><li><para><c>byQueue</c> – Only queues specified by the <c>sourceQueueArns</c> parameter can
            specify this queue as the dead-letter queue.</para></li></ul></li><li><para><c>sourceQueueArns</c> – The Amazon Resource Names (ARN)s of the source queues that
            can specify this queue as the dead-letter queue and redrive messages. You can specify
            this parameter only when the <c>redrivePermission</c> parameter is set to <c>byQueue</c>.
            You can specify up to 10 source queue ARNs. To allow more than 10 source queues to
            specify dead-letter queues, set the <c>redrivePermission</c> parameter to <c>allowAll</c>.</para></li></ul></li></ul><note><para>The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter
            queue of a standard queue must also be a standard queue.</para></note><para>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html">server-side-encryption</a>:</para><ul><li><para><c>KmsMasterKeyId</c> – The ID of an Amazon Web Services managed customer master
            key (CMK) for Amazon SQS or a custom CMK. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms">Key
            Terms</a>. While the alias of the Amazon Web Services managed CMK for Amazon SQS is
            always <c>alias/aws/sqs</c>, the alias of a custom CMK can, for example, be <c>alias/<i>MyAlias</i></c>. For more examples, see <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_DescribeKey.html#API_DescribeKey_RequestParameters">KeyId</a>
            in the <i>Key Management Service API Reference</i>. </para></li><li><para><c>KmsDataKeyReusePeriodSeconds</c> – The length of time, in seconds, for which Amazon
            SQS can reuse a <a href="https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#data-keys">data
            key</a> to encrypt or decrypt messages before calling KMS again. An integer representing
            seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300
            (5 minutes). A shorter time period provides better security but results in more calls
            to KMS which might incur charges after Free Tier. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work">How
            Does the Data Key Reuse Period Work?</a></para></li><li><para><c>SqsManagedSseEnabled</c> – Enables server-side queue encryption using SQS owned
            encryption keys. Only one server-side encryption option is supported per queue (for
            example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a>
            or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</para></li></ul><para>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO
            (first-in-first-out) queues</a>:</para><ul><li><para><c>FifoQueue</c> – Designates a queue as FIFO. Valid values are <c>true</c> and <c>false</c>.
            If you don't specify the <c>FifoQueue</c> attribute, Amazon SQS creates a standard
            queue. You can provide this attribute only during queue creation. You can't change
            it for an existing queue. When you set this attribute, you must also provide the <c>MessageGroupId</c>
            for your messages explicitly.</para><para>For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-understanding-logic.html">FIFO
            queue logic</a> in the <i>Amazon SQS Developer Guide</i>.</para></li><li><para><c>ContentBasedDeduplication</c> – Enables content-based deduplication. Valid values
            are <c>true</c> and <c>false</c>. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">Exactly-once
            processing</a> in the <i>Amazon SQS Developer Guide</i>. Note the following: </para><ul><li><para>Every message must have a unique <c>MessageDeduplicationId</c>.</para><ul><li><para>You may provide a <c>MessageDeduplicationId</c> explicitly.</para></li><li><para>If you aren't able to provide a <c>MessageDeduplicationId</c> and you enable <c>ContentBasedDeduplication</c>
            for your queue, Amazon SQS uses a SHA-256 hash to generate the <c>MessageDeduplicationId</c>
            using the body of the message (but not the attributes of the message). </para></li><li><para>If you don't provide a <c>MessageDeduplicationId</c> and the queue doesn't have <c>ContentBasedDeduplication</c>
            set, the action fails with an error.</para></li><li><para>If the queue has <c>ContentBasedDeduplication</c> set, your <c>MessageDeduplicationId</c>
            overrides the generated one.</para></li></ul></li><li><para>When <c>ContentBasedDeduplication</c> is in effect, messages with identical content
            sent within the deduplication interval are treated as duplicates and only one copy
            of the message is delivered.</para></li><li><para>If you send one message with <c>ContentBasedDeduplication</c> enabled and then another
            message with a <c>MessageDeduplicationId</c> that is the same as the one generated
            for the first <c>MessageDeduplicationId</c>, the two messages are treated as duplicates
            and only one copy of the message is delivered. </para></li></ul></li></ul><para>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html">high
            throughput for FIFO queues</a>:</para><ul><li><para><c>DeduplicationScope</c> – Specifies whether message deduplication occurs at the
            message group or queue level. Valid values are <c>messageGroup</c> and <c>queue</c>.</para></li><li><para><c>FifoThroughputLimit</c> – Specifies whether the FIFO queue throughput quota applies
            to the entire queue or per message group. Valid values are <c>perQueue</c> and <c>perMessageGroupId</c>.
            The <c>perMessageGroupId</c> value is allowed only when the value for <c>DeduplicationScope</c>
            is <c>messageGroup</c>.</para></li></ul><para>To enable high throughput for FIFO queues, do the following:</para><ul><li><para>Set <c>DeduplicationScope</c> to <c>messageGroup</c>.</para></li><li><para>Set <c>FifoThroughputLimit</c> to <c>perMessageGroupId</c>.</para></li></ul><para>If you set these attributes to anything other than the values shown for enabling high
            throughput, normal throughput is in effect and deduplication occurs as specified.</para><para>For information on throughput quotas, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html">Quotas
            related to messages</a> in the <i>Amazon SQS Developer Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.NewSQSQueueCmdlet.QueueName">
            <summary>
            <para>
            <para>The name of the new queue. The following limits apply to this name:</para><ul><li><para>A queue name can have up to 80 characters.</para></li><li><para>Valid values: alphanumeric characters, hyphens (<c>-</c>), and underscores (<c>_</c>).</para></li><li><para>A FIFO queue name must end with the <c>.fifo</c> suffix.</para></li></ul><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.NewSQSQueueCmdlet.Tag">
            <summary>
            <para>
            <para>Add cost allocation tags to the specified Amazon SQS queue. For an overview, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-queue-tags.html">Tagging
            Your Amazon SQS Queues</a> in the <i>Amazon SQS Developer Guide</i>.</para><para>When you use queue tags, keep the following guidelines in mind:</para><ul><li><para>Adding more than 50 tags to a queue isn't recommended.</para></li><li><para>Tags don't have any semantic meaning. Amazon SQS interprets tags as character strings.</para></li><li><para>Tags are case-sensitive.</para></li><li><para>A new tag with a key identical to that of an existing tag overwrites the existing
            tag.</para></li></ul><para>For a full list of tag restrictions, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-limits.html#limits-queues">Quotas
            related to queues</a> in the <i>Amazon SQS Developer Guide</i>.</para><note><para>To be able to tag a queue on creation, you must have the <c>sqs:CreateQueue</c> and
            <c>sqs:TagQueue</c> permissions.</para><para>Cross-account permissions don't apply to this action. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-customer-managed-policy-examples.html#grant-cross-account-permissions-to-role-and-user-name">Grant
            cross-account permissions to a role and a username</a> in the <i>Amazon SQS Developer
            Guide</i>.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.NewSQSQueueCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'QueueUrl'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.CreateQueueResponse).
            Specifying the name of a property of type Amazon.SQS.Model.CreateQueueResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.NewSQSQueueCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueName parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueName' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.NewSQSQueueCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.ReceiveSQSMessageCmdlet">
            <summary>
            Retrieves one or more messages (up to 10), from the specified queue. Using the <c>WaitTimeSeconds</c>
            parameter enables long-poll support. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-long-polling.html">Amazon
            SQS Long Polling</a> in the <i>Amazon SQS Developer Guide</i>.
             
              
            <para>
            Short poll is the default behavior where a weighted random set of machines is sampled
            on a <c>ReceiveMessage</c> call. Thus, only the messages on the sampled machines are
            returned. If the number of messages in the queue is small (fewer than 1,000), you
            most likely get fewer messages than you requested per <c>ReceiveMessage</c> call.
            If the number of messages in the queue is extremely small, you might not receive any
            messages in a particular <c>ReceiveMessage</c> response. If this happens, repeat the
            request.
            </para><para>
            For each message returned, the response includes the following:
            </para><ul><li><para>
            The message body.
            </para></li><li><para>
            An MD5 digest of the message body. For information about MD5, see <a href="https://www.ietf.org/rfc/rfc1321.txt">RFC1321</a>.
            </para></li><li><para>
            The <c>MessageId</c> you received when you sent the message to the queue.
            </para></li><li><para>
            The receipt handle.
            </para></li><li><para>
            The message attributes.
            </para></li><li><para>
            An MD5 digest of the message attributes.
            </para></li></ul><para>
            The receipt handle is the identifier you must provide when deleting the message. For
            more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-queue-message-identifiers.html">Queue
            and Message Identifiers</a> in the <i>Amazon SQS Developer Guide</i>.
            </para><para>
            You can provide the <c>VisibilityTimeout</c> parameter in your request. The parameter
            is applied to the messages that Amazon SQS returns in the response. If you don't include
            the parameter, the overall visibility timeout for the queue is used for the returned
            messages. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility
            Timeout</a> in the <i>Amazon SQS Developer Guide</i>.
            </para><para>
            A message that isn't deleted or a message whose visibility isn't extended before the
            visibility timeout expires counts as a failed receive. Depending on the configuration
            of the queue, the message might be sent to the dead-letter queue.
            </para><note><para>
            In the future, new attributes might be added. If you write code that calls this action,
            we recommend that you structure your code so that it can handle new attributes gracefully.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ReceiveSQSMessageCmdlet.AttributeName">
            <summary>
            <para>
            <para>A list of attributes that need to be returned along with each message. These attributes
            include:</para><ul><li><para><c>All</c> – Returns all values.</para></li><li><para><c>ApproximateFirstReceiveTimestamp</c> – Returns the time the message was first
            received from the queue (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch time</a>
            in milliseconds).</para></li><li><para><c>ApproximateReceiveCount</c> – Returns the number of times a message has been received
            across all queues but not deleted.</para></li><li><para><c>AWSTraceHeader</c> – Returns the X-Ray trace header string. </para></li><li><para><c>SenderId</c></para><ul><li><para>For a user, returns the user ID, for example <c>ABCDEFGHI1JKLMNOPQ23R</c>.</para></li><li><para>For an IAM role, returns the IAM role ID, for example <c>ABCDE1F2GH3I4JK5LMNOP:i-a123b456</c>.</para></li></ul></li><li><para><c>SentTimestamp</c> – Returns the time the message was sent to the queue (<a href="http://en.wikipedia.org/wiki/Unix_time">epoch
            time</a> in milliseconds).</para></li><li><para><c>SqsManagedSseEnabled</c> – Enables server-side queue encryption using SQS owned
            encryption keys. Only one server-side encryption option is supported per queue (for
            example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a>
            or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</para></li><li><para><c>MessageDeduplicationId</c> – Returns the value provided by the producer that calls
            the <c><a>SendMessage</a></c> action.</para></li><li><para><c>MessageGroupId</c> – Returns the value provided by the producer that calls the
            <c><a>SendMessage</a></c> action. Messages with the same <c>MessageGroupId</c> are
            returned in sequence.</para></li><li><para><c>SequenceNumber</c> – Returns the value provided by Amazon SQS.</para></li></ul>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ReceiveSQSMessageCmdlet.MessageCount">
            <summary>
            <para>
            <para>The maximum number of messages to return. Amazon SQS never returns more messages than
            this value (however, fewer messages might be returned). Valid values: 1 to 10. Default:
            1.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ReceiveSQSMessageCmdlet.MessageAttributeName">
            <summary>
            <para>
            <para>The name of the message attribute, where <i>N</i> is the index.</para><ul><li><para>The name can contain alphanumeric characters and the underscore (<c>_</c>), hyphen
            (<c>-</c>), and period (<c>.</c>).</para></li><li><para>The name is case-sensitive and must be unique among all attribute names for the message.</para></li><li><para>The name must not start with AWS-reserved prefixes such as <c>AWS.</c> or <c>Amazon.</c>
            (or any casing variants).</para></li><li><para>The name must not start or end with a period (<c>.</c>), and it should not have periods
            in succession (<c>..</c>).</para></li><li><para>The name can be up to 256 characters long.</para></li></ul><para>When using <c>ReceiveMessage</c>, you can send a list of attribute names to receive,
            or you can return all of the attributes by specifying <c>All</c> or <c>.*</c> in your
            request. You can also use all message attributes starting with a prefix, for example
            <c>bar.*</c>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ReceiveSQSMessageCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the Amazon SQS queue from which messages are received.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ReceiveSQSMessageCmdlet.ReceiveRequestAttemptId">
            <summary>
            <para>
            <para>This parameter applies only to FIFO (first-in-first-out) queues.</para><para>The token used for deduplication of <c>ReceiveMessage</c> calls. If a networking issue
            occurs after a <c>ReceiveMessage</c> action, and instead of a response you receive
            a generic error, it is possible to retry the same action with an identical <c>ReceiveRequestAttemptId</c>
            to retrieve the same set of messages, even if their visibility timeout has not yet
            expired.</para><ul><li><para>You can use <c>ReceiveRequestAttemptId</c> only for 5 minutes after a <c>ReceiveMessage</c>
            action.</para></li><li><para>When you set <c>FifoQueue</c>, a caller of the <c>ReceiveMessage</c> action can provide
            a <c>ReceiveRequestAttemptId</c> explicitly.</para></li><li><para>If a caller of the <c>ReceiveMessage</c> action doesn't provide a <c>ReceiveRequestAttemptId</c>,
            Amazon SQS generates a <c>ReceiveRequestAttemptId</c>.</para></li><li><para>It is possible to retry the <c>ReceiveMessage</c> action with the same <c>ReceiveRequestAttemptId</c>
            if none of the messages have been modified (deleted or had their visibility changes).</para></li><li><para>During a visibility timeout, subsequent calls with the same <c>ReceiveRequestAttemptId</c>
            return the same messages and receipt handles. If a retry occurs within the deduplication
            interval, it resets the visibility timeout. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility
            Timeout</a> in the <i>Amazon SQS Developer Guide</i>.</para><important><para>If a caller of the <c>ReceiveMessage</c> action still processes messages when the
            visibility timeout expires and messages become visible, another worker consuming from
            the same queue can receive the same messages and therefore process duplicates. Also,
            if a consumer whose message processing time is longer than the visibility timeout
            tries to delete the processed messages, the action fails with an error.</para><para>To mitigate this effect, ensure that your application observes a safe threshold before
            the visibility timeout expires and extend the visibility timeout as necessary.</para></important></li><li><para>While messages with a particular <c>MessageGroupId</c> are invisible, no more messages
            belonging to the same <c>MessageGroupId</c> are returned until the visibility timeout
            expires. You can still receive messages with another <c>MessageGroupId</c> as long
            as it is also visible.</para></li><li><para>If a caller of <c>ReceiveMessage</c> can't track the <c>ReceiveRequestAttemptId</c>,
            no retries work until the original visibility timeout expires. As a result, delays
            might occur but the messages in the queue remain in a strict order.</para></li></ul><para>The maximum length of <c>ReceiveRequestAttemptId</c> is 128 characters. <c>ReceiveRequestAttemptId</c>
            can contain alphanumeric characters (<c>a-z</c>, <c>A-Z</c>, <c>0-9</c>) and punctuation
            (<c>!"#$%&amp;'()*+,-./:;&lt;=&gt;?@[\]^_`{|}~</c>).</para><para>For best practices of using <c>ReceiveRequestAttemptId</c>, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/using-receiverequestattemptid-request-parameter.html">Using
            the ReceiveRequestAttemptId Request Parameter</a> in the <i>Amazon SQS Developer Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ReceiveSQSMessageCmdlet.VisibilityTimeout">
            <summary>
            <para>
            <para>The duration (in seconds) that the received messages are hidden from subsequent retrieve
            requests after being retrieved by a <c>ReceiveMessage</c> request.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ReceiveSQSMessageCmdlet.WaitTimeInSeconds">
            <summary>
            <para>
            <para>The duration (in seconds) for which the call waits for a message to arrive in the
            queue before returning. If a message is available, the call returns sooner than <c>WaitTimeSeconds</c>.
            If no messages are available and the wait time expires, the call returns successfully
            with an empty list of messages.</para><important><para>To avoid HTTP errors, ensure that the HTTP response timeout for <c>ReceiveMessage</c>
            requests is longer than the <c>WaitTimeSeconds</c> parameter. For example, with the
            Java SDK, you can set HTTP transport settings using the <a href="https://sdk.amazonaws.com/java/api/latest/software/amazon/awssdk/http/nio/netty/NettyNioAsyncHttpClient.html">
            NettyNioAsyncHttpClient</a> for asynchronous clients, or the <a href="https://sdk.amazonaws.com/java/api/latest/software/amazon/awssdk/http/apache/ApacheHttpClient.html">
            ApacheHttpClient</a> for synchronous clients. </para></important>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ReceiveSQSMessageCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'Messages'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.ReceiveMessageResponse).
            Specifying the name of a property of type Amazon.SQS.Model.ReceiveMessageResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ReceiveSQSMessageCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.ReceiveSQSMessageCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSMessageCmdlet">
            <summary>
            Deletes the specified message from the specified queue. To select the message to delete,
            use the <c>ReceiptHandle</c> of the message (<i>not</i> the <c>MessageId</c> which
            you receive when you send the message). Amazon SQS can delete a message from a queue
            even if a visibility timeout setting causes the message to be locked by another consumer.
            Amazon SQS automatically deletes messages left in a queue longer than the retention
            period configured for the queue.
             
             <note><para>
            The <c>ReceiptHandle</c> is associated with a <i>specific instance</i> of receiving
            a message. If you receive a message more than once, the <c>ReceiptHandle</c> is different
            each time you receive a message. When you use the <c>DeleteMessage</c> action, you
            must provide the most recently received <c>ReceiptHandle</c> for the message (otherwise,
            the request succeeds, but the message will not be deleted).
            </para><para>
            For standard queues, it is possible to receive a message even after you delete it.
            This might happen on rare occasions if one of the servers which stores a copy of the
            message is unavailable when you send the request to delete the message. The copy remains
            on the server and might be returned to you during a subsequent receive request. You
            should ensure that your application is idempotent, so that receiving a message more
            than once does not cause issues.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSMessageCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the Amazon SQS queue from which messages are deleted.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSMessageCmdlet.ReceiptHandle">
            <summary>
            <para>
            <para>The receipt handle associated with the message to delete.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSMessageCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.DeleteMessageResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSMessageCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSMessageCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSMessageBatchCmdlet">
            <summary>
            Deletes up to ten messages from the specified queue. This is a batch version of <c><a>DeleteMessage</a>.</c> The result of the action on each message is reported individually
            in the response.
             
             <important><para>
            Because the batch request can result in a combination of successful and unsuccessful
            actions, you should check for batch errors even when the call returns an HTTP status
            code of <c>200</c>.
            </para></important>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSMessageBatchCmdlet.Entry">
            <summary>
            <para>
            <para>Lists the receipt handles for the messages to be deleted.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSMessageBatchCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the Amazon SQS queue from which messages are deleted.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSMessageBatchCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.DeleteMessageBatchResponse).
            Specifying the name of a property of type Amazon.SQS.Model.DeleteMessageBatchResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSMessageBatchCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSMessageBatchCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSPermissionCmdlet">
            <summary>
            Revokes any permissions in the queue policy that matches the specified <c>Label</c>
            parameter.
             
             <note><ul><li><para>
            Only the owner of a queue can remove permissions from it.
            </para></li><li><para>
            Cross-account permissions don't apply to this action. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-customer-managed-policy-examples.html#grant-cross-account-permissions-to-role-and-user-name">Grant
            cross-account permissions to a role and a username</a> in the <i>Amazon SQS Developer
            Guide</i>.
            </para></li><li><para>
            To remove the ability to change queue permissions, you must deny permission to the
            <c>AddPermission</c>, <c>RemovePermission</c>, and <c>SetQueueAttributes</c> actions
            in your IAM policy.
            </para></li></ul></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSPermissionCmdlet.Label">
            <summary>
            <para>
            <para>The identification of the permission to remove. This is the label added using the
            <c><a>AddPermission</a></c> action.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSPermissionCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the Amazon SQS queue from which permissions are removed.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSPermissionCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.RemovePermissionResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSPermissionCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSPermissionCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSQueueCmdlet">
            <summary>
            Deletes the queue specified by the <c>QueueUrl</c>, regardless of the queue's contents.
             
             <important><para>
            Be careful with the <c>DeleteQueue</c> action: When you delete a queue, any messages
            in the queue are no longer available.
            </para></important><para>
            When you delete a queue, the deletion process takes up to 60 seconds. Requests you
            send involving that queue during the 60 seconds might succeed. For example, a <c><a>SendMessage</a></c> request might succeed, but after 60 seconds the queue and
            the message you sent no longer exist.
            </para><para>
            When you delete a queue, you must wait at least 60 seconds before creating a queue
            with the same name.
            </para><note><para>
            Cross-account permissions don't apply to this action. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-customer-managed-policy-examples.html#grant-cross-account-permissions-to-role-and-user-name">Grant
            cross-account permissions to a role and a username</a> in the <i>Amazon SQS Developer
            Guide</i>.
            </para><para>
            The delete operation uses the HTTP <c>GET</c> verb.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSQueueCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the Amazon SQS queue to delete.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSQueueCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.DeleteQueueResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSQueueCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSQueueCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSResourceTagCmdlet">
            <summary>
            Remove cost allocation tags from the specified Amazon SQS queue. For an overview,
            see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-queue-tags.html">Tagging
            Your Amazon SQS Queues</a> in the <i>Amazon SQS Developer Guide</i>.
             
             <note><para>
            Cross-account permissions don't apply to this action. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-customer-managed-policy-examples.html#grant-cross-account-permissions-to-role-and-user-name">Grant
            cross-account permissions to a role and a username</a> in the <i>Amazon SQS Developer
            Guide</i>.
            </para></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSResourceTagCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the queue.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSResourceTagCmdlet.TagKey">
            <summary>
            <para>
            <para>The list of tags to be removed from the specified queue.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSResourceTagCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.UntagQueueResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSResourceTagCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.RemoveSQSResourceTagCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageCmdlet">
            <summary>
            Delivers a message to the specified queue.
             
             <important><para>
            A message can include only XML, JSON, and unformatted text. The following Unicode
            characters are allowed:
            </para><para><c>#x9</c> | <c>#xA</c> | <c>#xD</c> | <c>#x20</c> to <c>#xD7FF</c> | <c>#xE000</c>
            to <c>#xFFFD</c> | <c>#x10000</c> to <c>#x10FFFF</c></para><para>
            Any characters not included in this list will be rejected. For more information, see
            the <a href="http://www.w3.org/TR/REC-xml/#charsets">W3C specification for characters</a>.
            </para></important>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageCmdlet.DelayInSeconds">
            <summary>
            <para>
            <para> The length of time, in seconds, for which to delay a specific message. Valid values:
            0 to 900. Maximum: 15 minutes. Messages with a positive <c>DelaySeconds</c> value
            become available for processing after the delay period is finished. If you don't specify
            a value, the default value for the queue applies. </para><note><para>When you set <c>FifoQueue</c>, you can't set <c>DelaySeconds</c> per message. You
            can set this parameter only on a queue level.</para></note>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageCmdlet.MessageAttribute">
            <summary>
            <para>
            <para>Each message attribute consists of a <c>Name</c>, <c>Type</c>, and <c>Value</c>. For
            more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-message-metadata.html#sqs-message-attributes">Amazon
            SQS message attributes</a> in the <i>Amazon SQS Developer Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageCmdlet.MessageBody">
            <summary>
            <para>
            <para>The message to send. The minimum size is one character. The maximum size is 256 KiB.</para><important><para>A message can include only XML, JSON, and unformatted text. The following Unicode
            characters are allowed:</para><para><c>#x9</c> | <c>#xA</c> | <c>#xD</c> | <c>#x20</c> to <c>#xD7FF</c> | <c>#xE000</c>
            to <c>#xFFFD</c> | <c>#x10000</c> to <c>#x10FFFF</c></para><para>Any characters not included in this list will be rejected. For more information, see
            the <a href="http://www.w3.org/TR/REC-xml/#charsets">W3C specification for characters</a>.</para></important>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageCmdlet.MessageDeduplicationId">
            <summary>
            <para>
            <para>This parameter applies only to FIFO (first-in-first-out) queues.</para><para>The token used for deduplication of sent messages. If a message with a particular
            <c>MessageDeduplicationId</c> is sent successfully, any messages sent with the same
            <c>MessageDeduplicationId</c> are accepted successfully but aren't delivered during
            the 5-minute deduplication interval. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">
            Exactly-once processing</a> in the <i>Amazon SQS Developer Guide</i>.</para><ul><li><para>Every message must have a unique <c>MessageDeduplicationId</c>,</para><ul><li><para>You may provide a <c>MessageDeduplicationId</c> explicitly.</para></li><li><para>If you aren't able to provide a <c>MessageDeduplicationId</c> and you enable <c>ContentBasedDeduplication</c>
            for your queue, Amazon SQS uses a SHA-256 hash to generate the <c>MessageDeduplicationId</c>
            using the body of the message (but not the attributes of the message). </para></li><li><para>If you don't provide a <c>MessageDeduplicationId</c> and the queue doesn't have <c>ContentBasedDeduplication</c>
            set, the action fails with an error.</para></li><li><para>If the queue has <c>ContentBasedDeduplication</c> set, your <c>MessageDeduplicationId</c>
            overrides the generated one.</para></li></ul></li><li><para>When <c>ContentBasedDeduplication</c> is in effect, messages with identical content
            sent within the deduplication interval are treated as duplicates and only one copy
            of the message is delivered.</para></li><li><para>If you send one message with <c>ContentBasedDeduplication</c> enabled and then another
            message with a <c>MessageDeduplicationId</c> that is the same as the one generated
            for the first <c>MessageDeduplicationId</c>, the two messages are treated as duplicates
            and only one copy of the message is delivered. </para></li></ul><note><para>The <c>MessageDeduplicationId</c> is available to the consumer of the message (this
            can be useful for troubleshooting delivery issues).</para><para>If a message is sent successfully but the acknowledgement is lost and the message
            is resent with the same <c>MessageDeduplicationId</c> after the deduplication interval,
            Amazon SQS can't detect duplicate messages.</para><para>Amazon SQS continues to keep track of the message deduplication ID even after the
            message is received and deleted.</para></note><para>The maximum length of <c>MessageDeduplicationId</c> is 128 characters. <c>MessageDeduplicationId</c>
            can contain alphanumeric characters (<c>a-z</c>, <c>A-Z</c>, <c>0-9</c>) and punctuation
            (<c>!"#$%&amp;'()*+,-./:;&lt;=&gt;?@[\]^_`{|}~</c>).</para><para>For best practices of using <c>MessageDeduplicationId</c>, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/using-messagededuplicationid-property.html">Using
            the MessageDeduplicationId Property</a> in the <i>Amazon SQS Developer Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageCmdlet.MessageGroupId">
            <summary>
            <para>
            <para>This parameter applies only to FIFO (first-in-first-out) queues.</para><para>The tag that specifies that a message belongs to a specific message group. Messages
            that belong to the same message group are processed in a FIFO manner (however, messages
            in different message groups might be processed out of order). To interleave multiple
            ordered streams within a single queue, use <c>MessageGroupId</c> values (for example,
            session data for multiple users). In this scenario, multiple consumers can process
            the queue, but the session data of each user is processed in a FIFO fashion.</para><ul><li><para>You must associate a non-empty <c>MessageGroupId</c> with a message. If you don't
            provide a <c>MessageGroupId</c>, the action fails.</para></li><li><para><c>ReceiveMessage</c> might return messages with multiple <c>MessageGroupId</c> values.
            For each <c>MessageGroupId</c>, the messages are sorted by time sent. The caller can't
            specify a <c>MessageGroupId</c>.</para></li></ul><para>The length of <c>MessageGroupId</c> is 128 characters. Valid values: alphanumeric
            characters and punctuation <c>(!"#$%&amp;'()*+,-./:;&lt;=&gt;?@[\]^_`{|}~)</c>.</para><para>For best practices of using <c>MessageGroupId</c>, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/using-messagegroupid-property.html">Using
            the MessageGroupId Property</a> in the <i>Amazon SQS Developer Guide</i>.</para><important><para><c>MessageGroupId</c> is required for FIFO queues. You can't use it for Standard
            queues.</para></important>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageCmdlet.MessageSystemAttribute">
            <summary>
            <para>
            <para>The message system attribute to send. Each message system attribute consists of a
            <c>Name</c>, <c>Type</c>, and <c>Value</c>.</para><important><ul><li><para>Currently, the only supported message system attribute is <c>AWSTraceHeader</c>. Its
            type must be <c>String</c> and its value must be a correctly formatted X-Ray trace
            header string.</para></li><li><para>The size of a message system attribute doesn't count towards the total size of a message.</para></li></ul></important>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the Amazon SQS queue to which a message is sent.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.SendMessageResponse).
            Specifying the name of a property of type Amazon.SQS.Model.SendMessageResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageBatchCmdlet">
            <summary>
            You can use <c>SendMessageBatch</c> to send up to 10 messages to the specified queue
            by assigning either identical or different values to each message (or by not assigning
            values at all). This is a batch version of <c><a>SendMessage</a>.</c> For a FIFO
            queue, multiple messages within a single batch are enqueued in the order they are
            sent.
             
              
            <para>
            The result of sending each message is reported individually in the response. Because
            the batch request can result in a combination of successful and unsuccessful actions,
            you should check for batch errors even when the call returns an HTTP status code of
            <c>200</c>.
            </para><para>
            The maximum allowed individual message size and the maximum total payload size (the
            sum of the individual lengths of all of the batched messages) are both 256 KiB (262,144
            bytes).
            </para><important><para>
            A message can include only XML, JSON, and unformatted text. The following Unicode
            characters are allowed:
            </para><para><c>#x9</c> | <c>#xA</c> | <c>#xD</c> | <c>#x20</c> to <c>#xD7FF</c> | <c>#xE000</c>
            to <c>#xFFFD</c> | <c>#x10000</c> to <c>#x10FFFF</c></para><para>
            Any characters not included in this list will be rejected. For more information, see
            the <a href="http://www.w3.org/TR/REC-xml/#charsets">W3C specification for characters</a>.
            </para></important><para>
            If you don't specify the <c>DelaySeconds</c> parameter for an entry, Amazon SQS uses
            the default value for the queue.
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageBatchCmdlet.Entry">
            <summary>
            <para>
            <para>A list of <c><a>SendMessageBatchRequestEntry</a></c> items.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageBatchCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the Amazon SQS queue to which batched messages are sent.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageBatchCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is '*'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.SendMessageBatchResponse).
            Specifying the name of a property of type Amazon.SQS.Model.SendMessageBatchResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageBatchCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SendSQSMessageBatchCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.SetSQSQueueAttributeCmdlet">
            <summary>
            Sets the value of one or more queue attributes. When you change a queue's attributes,
            the change can take up to 60 seconds for most of the attributes to propagate throughout
            the Amazon SQS system. Changes made to the <c>MessageRetentionPeriod</c> attribute
            can take up to 15 minutes and will impact existing messages in the queue potentially
            causing them to be expired and deleted if the <c>MessageRetentionPeriod</c> is reduced
            below the age of existing messages.
             
             <note><ul><li><para>
            In the future, new attributes might be added. If you write code that calls this action,
            we recommend that you structure your code so that it can handle new attributes gracefully.
            </para></li><li><para>
            Cross-account permissions don't apply to this action. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-customer-managed-policy-examples.html#grant-cross-account-permissions-to-role-and-user-name">Grant
            cross-account permissions to a role and a username</a> in the <i>Amazon SQS Developer
            Guide</i>.
            </para></li><li><para>
            To remove the ability to change queue permissions, you must deny permission to the
            <c>AddPermission</c>, <c>RemovePermission</c>, and <c>SetQueueAttributes</c> actions
            in your IAM policy.
            </para></li></ul></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SetSQSQueueAttributeCmdlet.Attribute">
            <summary>
            <para>
            <para>A map of attributes to set.</para><para>The following lists the names, descriptions, and values of the special request parameters
            that the <c>SetQueueAttributes</c> action uses:</para><ul><li><para><c>DelaySeconds</c> – The length of time, in seconds, for which the delivery of all
            messages in the queue is delayed. Valid values: An integer from 0 to 900 (15 minutes).
            Default: 0. </para></li><li><para><c>MaximumMessageSize</c> – The limit of how many bytes a message can contain before
            Amazon SQS rejects it. Valid values: An integer from 1,024 bytes (1 KiB) up to 262,144
            bytes (256 KiB). Default: 262,144 (256 KiB). </para></li><li><para><c>MessageRetentionPeriod</c> – The length of time, in seconds, for which Amazon
            SQS retains a message. Valid values: An integer representing seconds, from 60 (1 minute)
            to 1,209,600 (14 days). Default: 345,600 (4 days). When you change a queue's attributes,
            the change can take up to 60 seconds for most of the attributes to propagate throughout
            the Amazon SQS system. Changes made to the <c>MessageRetentionPeriod</c> attribute
            can take up to 15 minutes and will impact existing messages in the queue potentially
            causing them to be expired and deleted if the <c>MessageRetentionPeriod</c> is reduced
            below the age of existing messages.</para></li><li><para><c>Policy</c> – The queue's policy. A valid Amazon Web Services policy. For more
            information about policy structure, see <a href="https://docs.aws.amazon.com/IAM/latest/UserGuide/PoliciesOverview.html">Overview
            of Amazon Web Services IAM Policies</a> in the <i>Identity and Access Management User
            Guide</i>. </para></li><li><para><c>ReceiveMessageWaitTimeSeconds</c> – The length of time, in seconds, for which
            a <c><a>ReceiveMessage</a></c> action waits for a message to arrive. Valid values:
            An integer from 0 to 20 (seconds). Default: 0. </para></li><li><para><c>VisibilityTimeout</c> – The visibility timeout for the queue, in seconds. Valid
            values: An integer from 0 to 43,200 (12 hours). Default: 30. For more information
            about the visibility timeout, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-visibility-timeout.html">Visibility
            Timeout</a> in the <i>Amazon SQS Developer Guide</i>.</para></li></ul><para>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter
            queues:</a></para><ul><li><para><c>RedrivePolicy</c> – The string that includes the parameters for the dead-letter
            queue functionality of the source queue as a JSON object. The parameters are as follows:</para><ul><li><para><c>deadLetterTargetArn</c> – The Amazon Resource Name (ARN) of the dead-letter queue
            to which Amazon SQS moves messages after the value of <c>maxReceiveCount</c> is exceeded.</para></li><li><para><c>maxReceiveCount</c> – The number of times a message is delivered to the source
            queue before being moved to the dead-letter queue. Default: 10. When the <c>ReceiveCount</c>
            for a message exceeds the <c>maxReceiveCount</c> for a queue, Amazon SQS moves the
            message to the dead-letter-queue.</para></li></ul></li><li><para><c>RedriveAllowPolicy</c> – The string that includes the parameters for the permissions
            for the dead-letter queue redrive permission and which source queues can specify dead-letter
            queues as a JSON object. The parameters are as follows:</para><ul><li><para><c>redrivePermission</c> – The permission type that defines which source queues can
            specify the current queue as the dead-letter queue. Valid values are:</para><ul><li><para><c>allowAll</c> – (Default) Any source queues in this Amazon Web Services account
            in the same Region can specify this queue as the dead-letter queue.</para></li><li><para><c>denyAll</c> – No source queues can specify this queue as the dead-letter queue.</para></li><li><para><c>byQueue</c> – Only queues specified by the <c>sourceQueueArns</c> parameter can
            specify this queue as the dead-letter queue.</para></li></ul></li><li><para><c>sourceQueueArns</c> – The Amazon Resource Names (ARN)s of the source queues that
            can specify this queue as the dead-letter queue and redrive messages. You can specify
            this parameter only when the <c>redrivePermission</c> parameter is set to <c>byQueue</c>.
            You can specify up to 10 source queue ARNs. To allow more than 10 source queues to
            specify dead-letter queues, set the <c>redrivePermission</c> parameter to <c>allowAll</c>.</para></li></ul></li></ul><note><para>The dead-letter queue of a FIFO queue must also be a FIFO queue. Similarly, the dead-letter
            queue of a standard queue must also be a standard queue.</para></note><para>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html">server-side-encryption</a>:</para><ul><li><para><c>KmsMasterKeyId</c> – The ID of an Amazon Web Services managed customer master
            key (CMK) for Amazon SQS or a custom CMK. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-sse-key-terms">Key
            Terms</a>. While the alias of the AWS-managed CMK for Amazon SQS is always <c>alias/aws/sqs</c>,
            the alias of a custom CMK can, for example, be <c>alias/<i>MyAlias</i></c>. For more
            examples, see <a href="https://docs.aws.amazon.com/kms/latest/APIReference/API_DescribeKey.html#API_DescribeKey_RequestParameters">KeyId</a>
            in the <i>Key Management Service API Reference</i>. </para></li><li><para><c>KmsDataKeyReusePeriodSeconds</c> – The length of time, in seconds, for which Amazon
            SQS can reuse a <a href="https://docs.aws.amazon.com/kms/latest/developerguide/concepts.html#data-keys">data
            key</a> to encrypt or decrypt messages before calling KMS again. An integer representing
            seconds, between 60 seconds (1 minute) and 86,400 seconds (24 hours). Default: 300
            (5 minutes). A shorter time period provides better security but results in more calls
            to KMS which might incur charges after Free Tier. For more information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-server-side-encryption.html#sqs-how-does-the-data-key-reuse-period-work">How
            Does the Data Key Reuse Period Work?</a>. </para></li><li><para><c>SqsManagedSseEnabled</c> – Enables server-side queue encryption using SQS owned
            encryption keys. Only one server-side encryption option is supported per queue (for
            example, <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sse-existing-queue.html">SSE-KMS</a>
            or <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-configure-sqs-sse-queue.html">SSE-SQS</a>).</para></li></ul><para>The following attribute applies only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues.html">FIFO
            (first-in-first-out) queues</a>:</para><ul><li><para><c>ContentBasedDeduplication</c> – Enables content-based deduplication. For more
            information, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/FIFO-queues-exactly-once-processing.html">Exactly-once
            processing</a> in the <i>Amazon SQS Developer Guide</i>. Note the following: </para><ul><li><para>Every message must have a unique <c>MessageDeduplicationId</c>.</para><ul><li><para>You may provide a <c>MessageDeduplicationId</c> explicitly.</para></li><li><para>If you aren't able to provide a <c>MessageDeduplicationId</c> and you enable <c>ContentBasedDeduplication</c>
            for your queue, Amazon SQS uses a SHA-256 hash to generate the <c>MessageDeduplicationId</c>
            using the body of the message (but not the attributes of the message). </para></li><li><para>If you don't provide a <c>MessageDeduplicationId</c> and the queue doesn't have <c>ContentBasedDeduplication</c>
            set, the action fails with an error.</para></li><li><para>If the queue has <c>ContentBasedDeduplication</c> set, your <c>MessageDeduplicationId</c>
            overrides the generated one.</para></li></ul></li><li><para>When <c>ContentBasedDeduplication</c> is in effect, messages with identical content
            sent within the deduplication interval are treated as duplicates and only one copy
            of the message is delivered.</para></li><li><para>If you send one message with <c>ContentBasedDeduplication</c> enabled and then another
            message with a <c>MessageDeduplicationId</c> that is the same as the one generated
            for the first <c>MessageDeduplicationId</c>, the two messages are treated as duplicates
            and only one copy of the message is delivered. </para></li></ul></li></ul><para>The following attributes apply only to <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/high-throughput-fifo.html">high
            throughput for FIFO queues</a>:</para><ul><li><para><c>DeduplicationScope</c> – Specifies whether message deduplication occurs at the
            message group or queue level. Valid values are <c>messageGroup</c> and <c>queue</c>.</para></li><li><para><c>FifoThroughputLimit</c> – Specifies whether the FIFO queue throughput quota applies
            to the entire queue or per message group. Valid values are <c>perQueue</c> and <c>perMessageGroupId</c>.
            The <c>perMessageGroupId</c> value is allowed only when the value for <c>DeduplicationScope</c>
            is <c>messageGroup</c>.</para></li></ul><para>To enable high throughput for FIFO queues, do the following:</para><ul><li><para>Set <c>DeduplicationScope</c> to <c>messageGroup</c>.</para></li><li><para>Set <c>FifoThroughputLimit</c> to <c>perMessageGroupId</c>.</para></li></ul><para>If you set these attributes to anything other than the values shown for enabling high
            throughput, normal throughput is in effect and deduplication occurs as specified.</para><para>For information on throughput quotas, see <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/quotas-messages.html">Quotas
            related to messages</a> in the <i>Amazon SQS Developer Guide</i>.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SetSQSQueueAttributeCmdlet.QueueUrl">
            <summary>
            <para>
            <para>The URL of the Amazon SQS queue whose attributes are set.</para><para>Queue URLs and names are case-sensitive.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SetSQSQueueAttributeCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The cmdlet doesn't have a return value by default.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.SetQueueAttributesResponse).
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SetSQSQueueAttributeCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the QueueUrl parameter.
            The -PassThru parameter is deprecated, use -Select '^QueueUrl' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.SetSQSQueueAttributeCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.StartSQSMessageMoveTaskCmdlet">
            <summary>
            Starts an asynchronous task to move messages from a specified source queue to a specified
            destination queue.
             
             <note><ul><li><para>
            This action is currently limited to supporting message redrive from queues that are
            configured as <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter
            queues (DLQs)</a> of other Amazon SQS queues only. Non-SQS queue sources of dead-letter
            queues, such as Lambda or Amazon SNS topics, are currently not supported.
            </para></li><li><para>
            In dead-letter queues redrive context, the <c>StartMessageMoveTask</c> the source
            queue is the DLQ, while the destination queue can be the original source queue (from
            which the messages were driven to the dead-letter-queue), or a custom destination
            queue.
            </para></li><li><para>
            Currently, only standard queues support redrive. FIFO queues don't support redrive.
            </para></li><li><para>
            Only one active message movement task is supported per queue at any given time.
            </para></li></ul></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.StartSQSMessageMoveTaskCmdlet.DestinationArn">
            <summary>
            <para>
            <para>The ARN of the queue that receives the moved messages. You can use this field to specify
            the destination queue where you would like to redrive messages. If this field is left
            blank, the messages will be redriven back to their respective original source queues.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.StartSQSMessageMoveTaskCmdlet.MaxNumberOfMessagesPerSecond">
            <summary>
            <para>
            <para>The number of messages to be moved per second (the message movement rate). You can
            use this field to define a fixed message movement rate. The maximum value for messages
            per second is 500. If this field is left blank, the system will optimize the rate
            based on the queue message backlog size, which may vary throughout the duration of
            the message movement task.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.StartSQSMessageMoveTaskCmdlet.SourceArn">
            <summary>
            <para>
            <para>The ARN of the queue that contains the messages to be moved to another queue. Currently,
            only ARNs of dead-letter queues (DLQs) whose sources are other Amazon SQS queues are
            accepted. DLQs whose sources are non-SQS queues, such as Lambda or Amazon SNS topics,
            are not currently supported.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.StartSQSMessageMoveTaskCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'TaskHandle'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.StartMessageMoveTaskResponse).
            Specifying the name of a property of type Amazon.SQS.Model.StartMessageMoveTaskResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.StartSQSMessageMoveTaskCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the SourceArn parameter.
            The -PassThru parameter is deprecated, use -Select '^SourceArn' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.StartSQSMessageMoveTaskCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
        <member name="T:Amazon.PowerShell.Cmdlets.SQS.StopSQSMessageMoveTaskCmdlet">
            <summary>
            Cancels a specified message movement task. A message movement can only be cancelled
            when the current status is RUNNING. Cancelling a message movement task does not revert
            the messages that have already been moved. It can only stop the messages that have
            not been moved yet.
             
             <note><ul><li><para>
            This action is currently limited to supporting message redrive from <a href="https://docs.aws.amazon.com/AWSSimpleQueueService/latest/SQSDeveloperGuide/sqs-dead-letter-queues.html">dead-letter
            queues (DLQs)</a> only. In this context, the source queue is the dead-letter queue
            (DLQ), while the destination queue can be the original source queue (from which the
            messages were driven to the dead-letter-queue), or a custom destination queue.
            </para></li><li><para>
            Currently, only standard queues are supported.
            </para></li><li><para>
            Only one active message movement task is supported per queue at any given time.
            </para></li></ul></note>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.StopSQSMessageMoveTaskCmdlet.TaskHandle">
            <summary>
            <para>
            <para>An identifier associated with a message movement task.</para>
            </para>
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.StopSQSMessageMoveTaskCmdlet.Select">
            <summary>
            Use the -Select parameter to control the cmdlet output. The default value is 'ApproximateNumberOfMessagesMoved'.
            Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.SQS.Model.CancelMessageMoveTaskResponse).
            Specifying the name of a property of type Amazon.SQS.Model.CancelMessageMoveTaskResponse will result in that property being returned.
            Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.StopSQSMessageMoveTaskCmdlet.PassThru">
            <summary>
            Changes the cmdlet behavior to return the value passed to the TaskHandle parameter.
            The -PassThru parameter is deprecated, use -Select '^TaskHandle' instead. This parameter will be removed in a future version.
            </summary>
        </member>
        <member name="P:Amazon.PowerShell.Cmdlets.SQS.StopSQSMessageMoveTaskCmdlet.Force">
            <summary>
            This parameter overrides confirmation prompts to force
            the cmdlet to continue its operation. This parameter should always
            be used with caution.
            </summary>
        </member>
    </members>
</doc>