Public/Invoke-Iperf.ps1
|
<#
.DESCRIPTION This is a PowerShell Crescendo wrapper function for Iperf3 [KMG] indicates options that support a K/M/G suffix for kilo-, mega-, or giga- If string input is accepted for a parameter, the first line fo the description help indicates the expected value type. .PARAMETER help Get native help for Iperf3.exe .PARAMETER version show version information and quit .PARAMETER port # server port to listen on/connect to .PARAMETER format [kmgKMG] format to report: Kbits, Mbits, KBytes, MBytes .PARAMETER interval # seconds between periodic bandwidth reports .PARAMETER file xmit/recv the specified file .PARAMETER bind host bind to a specific interface .PARAMETER verboseout more detailed output .PARAMETER json output in JSON format .PARAMETER logfile f send output to logfile .PARAMETER debugout emit debugging output .PARAMETER server run in server mode .PARAMETER daemon run the server as a daemon .PARAMETER pidfile file write PID file .PARAMETER oneoff handle one client connection then exit .PARAMETER client host run in client mode, connecting to <host> .PARAMETER udp use UDP rather than TCP .PARAMETER bandwidth #[KMG][/#] target bandwidth in bits/sec (0 for unlimited) (default 1 Mbit/sec for UDP, unlimited for TCP) (optional slash and packet count for burst mode) .PARAMETER time # time in seconds to transmit for (default 10 secs) .PARAMETER bytes #[KMG] number of bytes to transmit (instead of -t) .PARAMETER blockcount #[KMG] number of blocks (packets) to transmit (instead of -t or -n) .PARAMETER bufferlength #[KMG] length of buffer to read or write (default 128 KB for TCP, 8 KB for UDP) .PARAMETER cport port bind to a specific client port (TCP and UDP, default: ephemeral port) .PARAMETER parallel # number of parallel client streams to run .PARAMETER reverse run in reverse mode (server sends, client receives) .PARAMETER window #[KMG] set window size / socket buffer size .PARAMETER mtu # set TCP/SCTP maximum segment size (MTU - 40 bytes) .PARAMETER nodelay set TCP/SCTP no delay, disabling Nagle's Algorithm .PARAMETER ipv4only only use IPv4 .PARAMETER ipv6only only use IPv6 .PARAMETER tos set the IP 'type of service' .PARAMETER zerocopy use a 'zero copy' method of sending data .PARAMETER omitseconds omit the first n seconds .PARAMETER Title prefix every output line with this string .PARAMETER showserveroutput get results from server .PARAMETER udp64bitcounters use 64-bit counters in UDP test packets .EXAMPLE Invoke-Iperf -server -port 12345 Setup a iperf server connection using port 12345 .EXAMPLE Invoke-Iperf -client -serverip 0.0.0.0 -port 12345 -parallel 8 Initiate a client bandwidth test with parallel connections .Link https://github.com/TheTaylorLee/AdminToolbox #> function Invoke-Iperf { [CmdletBinding()] param( [Parameter(ParameterSetName = 'help')] [switch]$help, [Parameter(ParameterSetName = 'help')] [switch]$version, [Parameter(ParameterSetName = 'Server')] [Parameter(ParameterSetName = 'Client')] [string]$port, [Parameter(ParameterSetName = 'Server')] [Parameter(ParameterSetName = 'Client')] [string]$format, [Parameter(ParameterSetName = 'Server')] [Parameter(ParameterSetName = 'Client')] [string]$interval, [Parameter(ParameterSetName = 'Server')] [Parameter(ParameterSetName = 'Client')] [string]$file, [Parameter(ParameterSetName = 'Server')] [Parameter(ParameterSetName = 'Client')] [string]$bind, [Parameter(ParameterSetName = 'Server')] [Parameter(ParameterSetName = 'Client')] [switch]$verboseout, [Parameter(ParameterSetName = 'Server')] [Parameter(ParameterSetName = 'Client')] [switch]$json, [Parameter(ParameterSetName = 'Server')] [Parameter(ParameterSetName = 'Client')] [string]$logfile, [Parameter(ParameterSetName = 'Server')] [Parameter(ParameterSetName = 'Client')] [switch]$debugout, [Parameter(Mandatory = $true, ParameterSetName = 'Server')] [switch]$server, [Parameter(ParameterSetName = 'Server')] [Parameter(ParameterSetName = 'Client')] [switch]$daemon, [Parameter(ParameterSetName = 'Server')] [switch]$pidfile, [Parameter(ParameterSetName = 'Server')] [switch]$oneoff, [Parameter(Mandatory = $true, ParameterSetName = 'Client')] [switch]$client, [Parameter(ParameterSetName = 'Client')] [switch]$udp, [Parameter(ParameterSetName = 'Client')] [string]$bandwidth, [Parameter(ParameterSetName = 'Client')] [string]$time, [Parameter(ParameterSetName = 'Client')] [string]$bytes, [Parameter(ParameterSetName = 'Client')] [string]$blockcount, [Parameter(ParameterSetName = 'Client')] [string]$bufferlength, [Parameter(ParameterSetName = 'Client')] [string]$cport, [Parameter(ParameterSetName = 'Client')] [string]$parallel, [Parameter(ParameterSetName = 'Client')] [switch]$reverse, [Parameter(ParameterSetName = 'Client')] [string]$window, [Parameter(ParameterSetName = 'Client')] [string]$mtu, [Parameter(ParameterSetName = 'Client')] [switch]$nodelay, [Parameter(ParameterSetName = 'Client')] [switch]$ipv4only, [Parameter(ParameterSetName = 'Client')] [switch]$ipv6only, [Parameter(ParameterSetName = 'Client')] [string]$tos, [Parameter(ParameterSetName = 'Client')] [switch]$zerocopy, [Parameter(ParameterSetName = 'Client')] [string]$omitseconds, [Parameter(ParameterSetName = 'Client')] [string]$Title, [Parameter(ParameterSetName = 'Client')] [string]$showserveroutput, [Parameter(ParameterSetName = 'Client')] [string]$udp64bitcounters ) BEGIN { $__PARAMETERMAP = @{ help = @{ OriginalName = '-h' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } version = @{ OriginalName = '-v' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } port = @{ OriginalName = '-p' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } format = @{ OriginalName = '-f' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } interval = @{ OriginalName = '-f' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } file = @{ OriginalName = '-F' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } bind = @{ OriginalName = '-B' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } verboseout = @{ OriginalName = '-V' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } json = @{ OriginalName = '-J' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } logfile = @{ OriginalName = '--logfile' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } debugout = @{ OriginalName = '-d' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } server = @{ OriginalName = '-s' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } daemon = @{ OriginalName = '-D' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } pidfile = @{ OriginalName = '-I' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } oneoff = @{ OriginalName = '-1' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } client = @{ OriginalName = '-c' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } udp = @{ OriginalName = '-u' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } bandwidth = @{ OriginalName = '-b' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } time = @{ OriginalName = '-t' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } bytes = @{ OriginalName = '-n' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } blockcount = @{ OriginalName = '-k' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } bufferlength = @{ OriginalName = '-l' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } cport = @{ OriginalName = '--cport' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } parallel = @{ OriginalName = '-P' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } reverse = @{ OriginalName = '-R' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } window = @{ OriginalName = '-w' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } mtu = @{ OriginalName = '-M' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } nodelay = @{ OriginalName = '-N' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } ipv4only = @{ OriginalName = '-4' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } ipv6only = @{ OriginalName = '-6' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } tos = @{ OriginalName = '-S' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } zerocopy = @{ OriginalName = '-Z' OriginalPosition = '0' Position = '2147483647' ParameterType = 'switch' NoGap = $False } omitseconds = @{ OriginalName = '-O' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } Title = @{ OriginalName = '-T' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } showserveroutput = @{ OriginalName = '--get-server-output' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } udp64bitcounters = @{ OriginalName = '--udp-counters-64bit' OriginalPosition = '0' Position = '2147483647' ParameterType = 'string' NoGap = $False } } $__outputHandlers = @{ Default = @{ StreamOutput = $true; Handler = { $input } } } } PROCESS { $__commandArgs = @() $__boundparms = $PSBoundParameters $MyInvocation.MyCommand.Parameters.Values.Where( { $_.SwitchParameter -and $_.Name -notmatch "Debug|Whatif|Confirm|Verbose" -and ! $PSBoundParameters[$_.Name] }).ForEach( { $PSBoundParameters[$_.Name] = [switch]::new($false) }) if ($PSBoundParameters["Debug"]) { Wait-Debugger } foreach ($paramName in $PSBoundParameters.Keys | Sort-Object { $__PARAMETERMAP[$_].OriginalPosition }) { $value = $PSBoundParameters[$paramName] $param = $__PARAMETERMAP[$paramName] if ($param) { if ( $value -is [switch] ) { $__commandArgs += if ( $value.IsPresent ) { $param.OriginalName } else { $param.DefaultMissingValue } } elseif ( $param.NoGap ) { $__commandArgs += "{0}""{1}""" -f $param.OriginalName, $value } else { $__commandArgs += $param.OriginalName; $__commandArgs += $value | ForEach-Object { $_ } } } } $__commandArgs = $__commandArgs | Where-Object { $_ } if ($PSBoundParameters["Debug"]) { Wait-Debugger } if ( $PSBoundParameters["Verbose"]) { Write-Verbose -Verbose -Message iperf3.exe $__commandArgs | Write-Verbose -Verbose } $__handlerInfo = $__outputHandlers[$PSCmdlet.ParameterSetName] if (! $__handlerInfo ) { $__handlerInfo = $__outputHandlers["Default"] # Guaranteed to be present } $__handler = $__handlerInfo.Handler if ( $PSCmdlet.ShouldProcess("iperf3.exe $__commandArgs")) { if ( $__handlerInfo.StreamOutput ) { & "iperf3.exe" $__commandArgs | & $__handler } else { $result = & "iperf3.exe" $__commandArgs & $__handler $result } } } # end PROCESS } |