EmailService.Autorest/exports/ProxyCmdletDefinitions.ps1


# ----------------------------------------------------------------------------------
# Copyright (c) Microsoft Corporation. All rights reserved.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Code generated by Microsoft (R) AutoRest Code Generator.Changes may cause incorrect behavior and will be lost if the code
# is regenerated.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Get the Domains resource and its properties.
.Description
Get the Domains resource and its properties.
.Example
Get-AzEmailServiceDomain -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
.Example
Get-AzEmailServiceDomain -Name AzureManagedDomain -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IDomainResource
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
EMAILSERVICEINPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
INPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
.Link
https://learn.microsoft.com/powershell/module/az.communication/get-azemailservicedomain
#>

function Get-AzEmailServiceDomain {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IDomainResource])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${EmailServiceName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='GetViaIdentityEmailService', Mandatory)]
    [Alias('DomainName')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the Domains resource.
    ${Name},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='GetViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${EmailServiceInputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.EmailService.private\Get-AzEmailServiceDomain_Get';
            GetViaIdentity = 'Az.EmailService.private\Get-AzEmailServiceDomain_GetViaIdentity';
            GetViaIdentityEmailService = 'Az.EmailService.private\Get-AzEmailServiceDomain_GetViaIdentityEmailService';
            List = 'Az.EmailService.private\Get-AzEmailServiceDomain_List';
        }
        if (('Get', 'List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Get a valid sender username for a domains resource.
.Description
Get a valid sender username for a domains resource.
.Example
Get-AzEmailServiceSenderUsername -SenderUsername donotreply -DomainName AzureManagedDomain -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
.Example
Get-AzEmailServiceSenderUsername -DomainName AzureManagedDomain -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ISenderUsernameResource
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
DOMAININPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
EMAILSERVICEINPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
INPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
.Link
https://learn.microsoft.com/powershell/module/az.communication/get-azemailservicesenderusername
#>

function Get-AzEmailServiceSenderUsername {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ISenderUsernameResource])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='GetViaIdentityEmailService', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the Domains resource.
    ${DomainName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${EmailServiceName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='GetViaIdentityDomain', Mandatory)]
    [Parameter(ParameterSetName='GetViaIdentityEmailService', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The valid sender Username.
    ${SenderUsername},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='GetViaIdentityDomain', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${DomainInputObject},

    [Parameter(ParameterSetName='GetViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${EmailServiceInputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.EmailService.private\Get-AzEmailServiceSenderUsername_Get';
            GetViaIdentity = 'Az.EmailService.private\Get-AzEmailServiceSenderUsername_GetViaIdentity';
            GetViaIdentityDomain = 'Az.EmailService.private\Get-AzEmailServiceSenderUsername_GetViaIdentityDomain';
            GetViaIdentityEmailService = 'Az.EmailService.private\Get-AzEmailServiceSenderUsername_GetViaIdentityEmailService';
            List = 'Az.EmailService.private\Get-AzEmailServiceSenderUsername_List';
        }
        if (('Get', 'List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Get the EmailService and its properties.
.Description
Get the EmailService and its properties.
.Example
Get-AzCommunicationService -SubscriptionId 73fc3592-3cef-4300-5e19-8d18b65ce0e8
.Example
Get-AzEmailService -Name ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceResource
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
.Link
https://learn.microsoft.com/powershell/module/az.communication/get-azemailservice
#>

function Get-AzEmailService {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceResource])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Alias('EmailServiceName')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${Name},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Parameter(ParameterSetName='List1')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.EmailService.private\Get-AzEmailService_Get';
            GetViaIdentity = 'Az.EmailService.private\Get-AzEmailService_GetViaIdentity';
            List = 'Az.EmailService.private\Get-AzEmailService_List';
            List1 = 'Az.EmailService.private\Get-AzEmailService_List1';
        }
        if (('Get', 'List', 'List1') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Initiate verification of DNS record.
.Description
Initiate verification of DNS record.
.Example
Invoke-AzEmailServiceInitiateDomainVerification -DomainName testcustomdomain1.net -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1 -VerificationType Domain
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IVerificationParameter
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
EMAILSERVICEINPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
INPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
PARAMETER <IVerificationParameter>: Input parameter for verification APIs
  VerificationType <String>: Type of verification.
.Link
https://learn.microsoft.com/powershell/module/az.communication/invoke-azemailserviceinitiatedomainverification
#>

function Invoke-AzEmailServiceInitiateDomainVerification {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='InitiateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Initiate', Mandatory)]
    [Parameter(ParameterSetName='InitiateExpanded', Mandatory)]
    [Parameter(ParameterSetName='InitiateViaIdentityEmailService', Mandatory)]
    [Parameter(ParameterSetName='InitiateViaIdentityEmailServiceExpanded', Mandatory)]
    [Parameter(ParameterSetName='InitiateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='InitiateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the Domains resource.
    ${DomainName},

    [Parameter(ParameterSetName='Initiate', Mandatory)]
    [Parameter(ParameterSetName='InitiateExpanded', Mandatory)]
    [Parameter(ParameterSetName='InitiateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='InitiateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${EmailServiceName},

    [Parameter(ParameterSetName='Initiate', Mandatory)]
    [Parameter(ParameterSetName='InitiateExpanded', Mandatory)]
    [Parameter(ParameterSetName='InitiateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='InitiateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Initiate')]
    [Parameter(ParameterSetName='InitiateExpanded')]
    [Parameter(ParameterSetName='InitiateViaJsonFilePath')]
    [Parameter(ParameterSetName='InitiateViaJsonString')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='InitiateViaIdentity', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='InitiateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='InitiateViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='InitiateViaIdentityEmailServiceExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${EmailServiceInputObject},

    [Parameter(ParameterSetName='Initiate', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='InitiateViaIdentity', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='InitiateViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IVerificationParameter]
    # Input parameter for verification APIs
    ${Parameter},

    [Parameter(ParameterSetName='InitiateExpanded', Mandatory)]
    [Parameter(ParameterSetName='InitiateViaIdentityEmailServiceExpanded', Mandatory)]
    [Parameter(ParameterSetName='InitiateViaIdentityExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.PSArgumentCompleterAttribute("Domain", "SPF", "DKIM", "DKIM2", "DMARC")]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Type of verification.
    ${VerificationType},

    [Parameter(ParameterSetName='InitiateViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Initiate operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='InitiateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Json string supplied to the Initiate operation
    ${JsonString},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Initiate = 'Az.EmailService.private\Invoke-AzEmailServiceInitiateDomainVerification_Initiate';
            InitiateExpanded = 'Az.EmailService.private\Invoke-AzEmailServiceInitiateDomainVerification_InitiateExpanded';
            InitiateViaIdentity = 'Az.EmailService.private\Invoke-AzEmailServiceInitiateDomainVerification_InitiateViaIdentity';
            InitiateViaIdentityEmailService = 'Az.EmailService.private\Invoke-AzEmailServiceInitiateDomainVerification_InitiateViaIdentityEmailService';
            InitiateViaIdentityEmailServiceExpanded = 'Az.EmailService.private\Invoke-AzEmailServiceInitiateDomainVerification_InitiateViaIdentityEmailServiceExpanded';
            InitiateViaIdentityExpanded = 'Az.EmailService.private\Invoke-AzEmailServiceInitiateDomainVerification_InitiateViaIdentityExpanded';
            InitiateViaJsonFilePath = 'Az.EmailService.private\Invoke-AzEmailServiceInitiateDomainVerification_InitiateViaJsonFilePath';
            InitiateViaJsonString = 'Az.EmailService.private\Invoke-AzEmailServiceInitiateDomainVerification_InitiateViaJsonString';
        }
        if (('Initiate', 'InitiateExpanded', 'InitiateViaJsonFilePath', 'InitiateViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Add a new Domains resource under the parent EmailService resource or update an existing Domains resource.
.Description
Add a new Domains resource under the parent EmailService resource or update an existing Domains resource.
.Example
New-AzEmailServiceDomain -Name testcustomdomain2.net -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1 -DomainManagement CustomerManaged
.Example
New-AzEmailServiceDomain -Name AzureManagedDomain -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1 -DomainManagement AzureManaged
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IDomainResource
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IDomainResource
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
EMAILSERVICEINPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
PARAMETER <IDomainResource>: A class representing a Domains resource.
  Location <String>: The geo-location where the resource lives
  [Tag <ITrackedResourceTags>]: Resource tags.
    [(Any) <String>]: This indicates any property can be added to this object.
  [DomainManagement <String>]: Describes how a Domains resource is being managed.
  [UserEngagementTracking <String>]: Describes whether user engagement tracking is enabled or disabled.
.Link
https://learn.microsoft.com/powershell/module/az.communication/new-azemailservicedomain
#>

function New-AzEmailServiceDomain {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IDomainResource])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Alias('DomainName')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the Domains resource.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${EmailServiceName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaJsonFilePath')]
    [Parameter(ParameterSetName='CreateViaJsonString')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='CreateViaIdentityEmailServiceExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${EmailServiceInputObject},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityEmailServiceExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Name='Location default', Description='Sets the Location default value to Global.', Script='"global"')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityEmailServiceExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.PSArgumentCompleterAttribute("AzureManaged", "CustomerManaged", "CustomerManagedInExchangeOnline")]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Describes how a Domains resource is being managed.
    ${DomainManagement},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityEmailServiceExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityEmailServiceExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.PSArgumentCompleterAttribute("Disabled", "Enabled")]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Describes whether user engagement tracking is enabled or disabled.
    ${UserEngagementTracking},

    [Parameter(ParameterSetName='CreateViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IDomainResource]
    # A class representing a Domains resource.
    ${Parameter},

    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Create operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Json string supplied to the Create operation
    ${JsonString},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CreateExpanded = 'Az.EmailService.private\New-AzEmailServiceDomain_CreateExpanded';
            CreateViaIdentityEmailService = 'Az.EmailService.private\New-AzEmailServiceDomain_CreateViaIdentityEmailService';
            CreateViaIdentityEmailServiceExpanded = 'Az.EmailService.private\New-AzEmailServiceDomain_CreateViaIdentityEmailServiceExpanded';
            CreateViaJsonFilePath = 'Az.EmailService.private\New-AzEmailServiceDomain_CreateViaJsonFilePath';
            CreateViaJsonString = 'Az.EmailService.private\New-AzEmailServiceDomain_CreateViaJsonString';
        }
        if (('CreateExpanded', 'CreateViaJsonFilePath', 'CreateViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        if (('CreateExpanded', 'CreateViaIdentityEmailServiceExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Location') ) {
            $PSBoundParameters['Location'] = "global"
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Add a new SenderUsername resource under the parent Domains resource or update an existing SenderUsername resource.
.Description
Add a new SenderUsername resource under the parent Domains resource or update an existing SenderUsername resource.
.Example
New-AzEmailServiceSenderUsername -SenderUsername test -Username test -DomainName testcustomdomain2.net -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
.Example
New-AzEmailServiceSenderUsername -SenderUsername test -Username test -DomainName AzureManagedDomain -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ISenderUsernameResource
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ISenderUsernameResource
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
DOMAININPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
EMAILSERVICEINPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
PARAMETER <ISenderUsernameResource>: A class representing a SenderUsername resource.
  [DisplayName <String>]: The display name for the senderUsername.
  [Username <String>]: A sender senderUsername to be used when sending emails.
.Link
https://learn.microsoft.com/powershell/module/az.communication/new-azemailservicesenderusername
#>

function New-AzEmailServiceSenderUsername {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ISenderUsernameResource])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The valid sender Username.
    ${SenderUsername},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaIdentityEmailService', Mandatory)]
    [Parameter(ParameterSetName='CreateViaIdentityEmailServiceExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the Domains resource.
    ${DomainName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${EmailServiceName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaJsonFilePath')]
    [Parameter(ParameterSetName='CreateViaJsonString')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityDomain', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='CreateViaIdentityDomainExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${DomainInputObject},

    [Parameter(ParameterSetName='CreateViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='CreateViaIdentityEmailServiceExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${EmailServiceInputObject},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityDomainExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityEmailServiceExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # The display name for the senderUsername.
    ${DisplayName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityDomainExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityEmailServiceExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # A sender senderUsername to be used when sending emails.
    ${Username},

    [Parameter(ParameterSetName='CreateViaIdentityDomain', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='CreateViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ISenderUsernameResource]
    # A class representing a SenderUsername resource.
    ${Parameter},

    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Create operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Json string supplied to the Create operation
    ${JsonString},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CreateExpanded = 'Az.EmailService.private\New-AzEmailServiceSenderUsername_CreateExpanded';
            CreateViaIdentityDomain = 'Az.EmailService.private\New-AzEmailServiceSenderUsername_CreateViaIdentityDomain';
            CreateViaIdentityDomainExpanded = 'Az.EmailService.private\New-AzEmailServiceSenderUsername_CreateViaIdentityDomainExpanded';
            CreateViaIdentityEmailService = 'Az.EmailService.private\New-AzEmailServiceSenderUsername_CreateViaIdentityEmailService';
            CreateViaIdentityEmailServiceExpanded = 'Az.EmailService.private\New-AzEmailServiceSenderUsername_CreateViaIdentityEmailServiceExpanded';
            CreateViaJsonFilePath = 'Az.EmailService.private\New-AzEmailServiceSenderUsername_CreateViaJsonFilePath';
            CreateViaJsonString = 'Az.EmailService.private\New-AzEmailServiceSenderUsername_CreateViaJsonString';
        }
        if (('CreateExpanded', 'CreateViaJsonFilePath', 'CreateViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Create a new EmailService or update an existing EmailService.
.Description
Create a new EmailService or update an existing EmailService.
.Example
New-AzEmailService -Name ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1 -DataLocation "United States"
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceResource
.Link
https://learn.microsoft.com/powershell/module/az.communication/new-azemailservice
#>

function New-AzEmailService {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceResource])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Alias('EmailServiceName')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Name='Location default', Description='Sets the Location default value to Global.', Script='"global"')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # The location where the email service stores its data at rest.
    ${DataLocation},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Create operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Json string supplied to the Create operation
    ${JsonString},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CreateExpanded = 'Az.EmailService.private\New-AzEmailService_CreateExpanded';
            CreateViaJsonFilePath = 'Az.EmailService.private\New-AzEmailService_CreateViaJsonFilePath';
            CreateViaJsonString = 'Az.EmailService.private\New-AzEmailService_CreateViaJsonString';
        }
        if (('CreateExpanded', 'CreateViaJsonFilePath', 'CreateViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Location') ) {
            $PSBoundParameters['Location'] = "global"
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Operation to delete a Domains resource.
.Description
Operation to delete a Domains resource.
.Example
Remove-AzEmailServiceDomain -Name test.net -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
.Example
Remove-AzEmailServiceDomain -Name AzureManagedDomain -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
EMAILSERVICEINPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
INPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
.Link
https://learn.microsoft.com/powershell/module/az.communication/remove-azemailservicedomain
#>

function Remove-AzEmailServiceDomain {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${EmailServiceName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Parameter(ParameterSetName='DeleteViaIdentityEmailService', Mandatory)]
    [Alias('DomainName')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the Domains resource.
    ${Name},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='DeleteViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${EmailServiceInputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.EmailService.private\Remove-AzEmailServiceDomain_Delete';
            DeleteViaIdentity = 'Az.EmailService.private\Remove-AzEmailServiceDomain_DeleteViaIdentity';
            DeleteViaIdentityEmailService = 'Az.EmailService.private\Remove-AzEmailServiceDomain_DeleteViaIdentityEmailService';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Operation to delete a SenderUsernames resource.
.Description
Operation to delete a SenderUsernames resource.
.Example
Remove-AzEmailServiceSenderUsername -SenderUsername test -DomainName testcustomdomain1.net -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
.Example
Remove-AzEmailServiceSenderUsername -SenderUsername test -DomainName AzureManagedDomain -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
DOMAININPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
EMAILSERVICEINPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
INPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
.Link
https://learn.microsoft.com/powershell/module/az.communication/remove-azemailservicesenderusername
#>

function Remove-AzEmailServiceSenderUsername {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Parameter(ParameterSetName='DeleteViaIdentityEmailService', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the Domains resource.
    ${DomainName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${EmailServiceName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Parameter(ParameterSetName='DeleteViaIdentityDomain', Mandatory)]
    [Parameter(ParameterSetName='DeleteViaIdentityEmailService', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The valid sender Username.
    ${SenderUsername},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='DeleteViaIdentityDomain', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${DomainInputObject},

    [Parameter(ParameterSetName='DeleteViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${EmailServiceInputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.EmailService.private\Remove-AzEmailServiceSenderUsername_Delete';
            DeleteViaIdentity = 'Az.EmailService.private\Remove-AzEmailServiceSenderUsername_DeleteViaIdentity';
            DeleteViaIdentityDomain = 'Az.EmailService.private\Remove-AzEmailServiceSenderUsername_DeleteViaIdentityDomain';
            DeleteViaIdentityEmailService = 'Az.EmailService.private\Remove-AzEmailServiceSenderUsername_DeleteViaIdentityEmailService';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Operation to delete a EmailService.
.Description
Operation to delete a EmailService.
.Example
Remove-AzEmailService -Name ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
.Link
https://learn.microsoft.com/powershell/module/az.communication/remove-azemailservice
#>

function Remove-AzEmailService {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Alias('EmailServiceName')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${Name},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.EmailService.private\Remove-AzEmailService_Delete';
            DeleteViaIdentity = 'Az.EmailService.private\Remove-AzEmailService_DeleteViaIdentity';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Cancel verification of DNS record.
.Description
Cancel verification of DNS record.
.Example
Stop-AzEmailServiceDomainVerification -DomainName testcustomdomain1.net -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1 -VerificationType Domain
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IVerificationParameter
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
EMAILSERVICEINPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
INPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
PARAMETER <IVerificationParameter>: Input parameter for verification APIs
  VerificationType <String>: Type of verification.
.Link
https://learn.microsoft.com/powershell/module/az.communication/stop-azemailservicedomainverification
#>

function Stop-AzEmailServiceDomainVerification {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='CancelExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Cancel', Mandatory)]
    [Parameter(ParameterSetName='CancelExpanded', Mandatory)]
    [Parameter(ParameterSetName='CancelViaIdentityEmailService', Mandatory)]
    [Parameter(ParameterSetName='CancelViaIdentityEmailServiceExpanded', Mandatory)]
    [Parameter(ParameterSetName='CancelViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='CancelViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the Domains resource.
    ${DomainName},

    [Parameter(ParameterSetName='Cancel', Mandatory)]
    [Parameter(ParameterSetName='CancelExpanded', Mandatory)]
    [Parameter(ParameterSetName='CancelViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='CancelViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${EmailServiceName},

    [Parameter(ParameterSetName='Cancel', Mandatory)]
    [Parameter(ParameterSetName='CancelExpanded', Mandatory)]
    [Parameter(ParameterSetName='CancelViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='CancelViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Cancel')]
    [Parameter(ParameterSetName='CancelExpanded')]
    [Parameter(ParameterSetName='CancelViaJsonFilePath')]
    [Parameter(ParameterSetName='CancelViaJsonString')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CancelViaIdentity', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='CancelViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='CancelViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='CancelViaIdentityEmailServiceExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${EmailServiceInputObject},

    [Parameter(ParameterSetName='Cancel', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='CancelViaIdentity', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='CancelViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IVerificationParameter]
    # Input parameter for verification APIs
    ${Parameter},

    [Parameter(ParameterSetName='CancelExpanded', Mandatory)]
    [Parameter(ParameterSetName='CancelViaIdentityEmailServiceExpanded', Mandatory)]
    [Parameter(ParameterSetName='CancelViaIdentityExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.PSArgumentCompleterAttribute("Domain", "SPF", "DKIM", "DKIM2", "DMARC")]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Type of verification.
    ${VerificationType},

    [Parameter(ParameterSetName='CancelViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Cancel operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='CancelViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Json string supplied to the Cancel operation
    ${JsonString},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Cancel = 'Az.EmailService.private\Stop-AzEmailServiceDomainVerification_Cancel';
            CancelExpanded = 'Az.EmailService.private\Stop-AzEmailServiceDomainVerification_CancelExpanded';
            CancelViaIdentity = 'Az.EmailService.private\Stop-AzEmailServiceDomainVerification_CancelViaIdentity';
            CancelViaIdentityEmailService = 'Az.EmailService.private\Stop-AzEmailServiceDomainVerification_CancelViaIdentityEmailService';
            CancelViaIdentityEmailServiceExpanded = 'Az.EmailService.private\Stop-AzEmailServiceDomainVerification_CancelViaIdentityEmailServiceExpanded';
            CancelViaIdentityExpanded = 'Az.EmailService.private\Stop-AzEmailServiceDomainVerification_CancelViaIdentityExpanded';
            CancelViaJsonFilePath = 'Az.EmailService.private\Stop-AzEmailServiceDomainVerification_CancelViaJsonFilePath';
            CancelViaJsonString = 'Az.EmailService.private\Stop-AzEmailServiceDomainVerification_CancelViaJsonString';
        }
        if (('Cancel', 'CancelExpanded', 'CancelViaJsonFilePath', 'CancelViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Operation to update an existing Domains resource.
.Description
Operation to update an existing Domains resource.
.Example
Update-AzEmailServiceDomain -Name testcustomdomain2.net -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1 -Tag @{ExampleKey1="ExampleUpdatedValue"} -UserEngagementTracking 1
.Example
Update-AzEmailServiceDomain -Name AzureManagedDomain -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1 -Tag @{ExampleKey1="ExampleValue1updated"} -UserEngagementTracking 1
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IUpdateDomainRequestParameters
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IDomainResource
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
EMAILSERVICEINPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
INPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
PARAMETER <IUpdateDomainRequestParameters>: A class that describes the PATCH request parameters of a Domains resource.
  [Tag <ITaggedResourceTags>]: Tags of the service which is a list of key value pairs that describe the resource.
    [(Any) <String>]: This indicates any property can be added to this object.
  [UserEngagementTracking <String>]: Describes whether user engagement tracking is enabled or disabled.
.Link
https://learn.microsoft.com/powershell/module/az.communication/update-azemailservicedomain
#>

function Update-AzEmailServiceDomain {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IDomainResource])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${EmailServiceName},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaIdentityEmailService', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaIdentityEmailServiceExpanded', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonString', Mandatory)]
    [Alias('DomainName')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the Domains resource.
    ${Name},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateViaJsonFilePath')]
    [Parameter(ParameterSetName='UpdateViaJsonString')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='UpdateViaIdentityEmailServiceExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${EmailServiceInputObject},

    [Parameter(ParameterSetName='UpdateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityEmailServiceExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ITaggedResourceTags]))]
    [System.Collections.Hashtable]
    # Tags of the service which is a list of key value pairs that describe the resource.
    ${Tag},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityEmailServiceExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.PSArgumentCompleterAttribute("Disabled", "Enabled")]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Describes whether user engagement tracking is enabled or disabled.
    ${UserEngagementTracking},

    [Parameter(ParameterSetName='UpdateViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IUpdateDomainRequestParameters]
    # A class that describes the PATCH request parameters of a Domains resource.
    ${Parameter},

    [Parameter(ParameterSetName='UpdateViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Update operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='UpdateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Json string supplied to the Update operation
    ${JsonString},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            UpdateExpanded = 'Az.EmailService.private\Update-AzEmailServiceDomain_UpdateExpanded';
            UpdateViaIdentityEmailService = 'Az.EmailService.private\Update-AzEmailServiceDomain_UpdateViaIdentityEmailService';
            UpdateViaIdentityEmailServiceExpanded = 'Az.EmailService.private\Update-AzEmailServiceDomain_UpdateViaIdentityEmailServiceExpanded';
            UpdateViaIdentityExpanded = 'Az.EmailService.private\Update-AzEmailServiceDomain_UpdateViaIdentityExpanded';
            UpdateViaJsonFilePath = 'Az.EmailService.private\Update-AzEmailServiceDomain_UpdateViaJsonFilePath';
            UpdateViaJsonString = 'Az.EmailService.private\Update-AzEmailServiceDomain_UpdateViaJsonString';
        }
        if (('UpdateExpanded', 'UpdateViaJsonFilePath', 'UpdateViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Add a new SenderUsername resource under the parent Domains resource or update an existing SenderUsername resource.
.Description
Add a new SenderUsername resource under the parent Domains resource or update an existing SenderUsername resource.
.Example
Update-AzEmailServiceSenderUsername -SenderUsername test -Username test -DisplayName testdisplayname -DomainName testcustomdomain2.net -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
.Example
Update-AzEmailServiceSenderUsername -SenderUsername test -Username test -DisplayName testAzureDomaindisplayname -DomainName AzureManagedDomain -EmailServiceName ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ISenderUsernameResource
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ISenderUsernameResource
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
DOMAININPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
EMAILSERVICEINPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
INPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
 
PARAMETER <ISenderUsernameResource>: A class representing a SenderUsername resource.
  [DisplayName <String>]: The display name for the senderUsername.
  [Username <String>]: A sender senderUsername to be used when sending emails.
.Link
https://learn.microsoft.com/powershell/module/az.communication/update-azemailservicesenderusername
#>

function Update-AzEmailServiceSenderUsername {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ISenderUsernameResource])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaIdentityEmailService', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaIdentityEmailServiceExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the Domains resource.
    ${DomainName},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${EmailServiceName},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaIdentityDomain', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaIdentityDomainExpanded', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaIdentityEmailService', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaIdentityEmailServiceExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The valid sender Username.
    ${SenderUsername},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateViaIdentityDomain', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='UpdateViaIdentityDomainExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${DomainInputObject},

    [Parameter(ParameterSetName='UpdateViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='UpdateViaIdentityEmailServiceExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${EmailServiceInputObject},

    [Parameter(ParameterSetName='UpdateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityDomainExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityEmailServiceExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # The display name for the senderUsername.
    ${DisplayName},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityDomainExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityEmailServiceExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # A sender senderUsername to be used when sending emails.
    ${Username},

    [Parameter(ParameterSetName='UpdateViaIdentityDomain', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='UpdateViaIdentityEmailService', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ISenderUsernameResource]
    # A class representing a SenderUsername resource.
    ${Parameter},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            UpdateExpanded = 'Az.EmailService.private\Update-AzEmailServiceSenderUsername_UpdateExpanded';
            UpdateViaIdentityDomain = 'Az.EmailService.private\Update-AzEmailServiceSenderUsername_UpdateViaIdentityDomain';
            UpdateViaIdentityDomainExpanded = 'Az.EmailService.private\Update-AzEmailServiceSenderUsername_UpdateViaIdentityDomainExpanded';
            UpdateViaIdentityEmailService = 'Az.EmailService.private\Update-AzEmailServiceSenderUsername_UpdateViaIdentityEmailService';
            UpdateViaIdentityEmailServiceExpanded = 'Az.EmailService.private\Update-AzEmailServiceSenderUsername_UpdateViaIdentityEmailServiceExpanded';
            UpdateViaIdentityExpanded = 'Az.EmailService.private\Update-AzEmailServiceSenderUsername_UpdateViaIdentityExpanded';
        }
        if (('UpdateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Operation to update an existing EmailService.
.Description
Operation to update an existing EmailService.
.Example
Update-AzEmailService -Name ContosoAcsResource1 -ResourceGroupName ContosoResourceProvider1 -Tag @{ExampleKey1="UpdatedTagValue"}
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceResource
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IEmailServiceIdentity>: Identity Parameter
  [DomainName <String>]: The name of the Domains resource.
  [EmailServiceName <String>]: The name of the EmailService resource.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SenderUsername <String>]: The valid sender Username.
  [SubscriptionId <String>]: The ID of the target subscription. The value must be an UUID.
.Link
https://learn.microsoft.com/powershell/module/az.communication/update-azemailservice
#>

function Update-AzEmailService {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceResource])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonString', Mandatory)]
    [Alias('EmailServiceName')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the EmailService resource.
    ${Name},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateViaJsonFilePath')]
    [Parameter(ParameterSetName='UpdateViaJsonString')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    # The value must be an UUID.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.IEmailServiceIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.EmailService.Models.ITaggedResourceTags]))]
    [System.Collections.Hashtable]
    # Tags of the service which is a list of key value pairs that describe the resource.
    ${Tag},

    [Parameter(ParameterSetName='UpdateViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Update operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='UpdateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Body')]
    [System.String]
    # Json string supplied to the Update operation
    ${JsonString},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            UpdateExpanded = 'Az.EmailService.private\Update-AzEmailService_UpdateExpanded';
            UpdateViaIdentityExpanded = 'Az.EmailService.private\Update-AzEmailService_UpdateViaIdentityExpanded';
            UpdateViaJsonFilePath = 'Az.EmailService.private\Update-AzEmailService_UpdateViaJsonFilePath';
            UpdateViaJsonString = 'Az.EmailService.private\Update-AzEmailService_UpdateViaJsonString';
        }
        if (('UpdateExpanded', 'UpdateViaJsonFilePath', 'UpdateViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.EmailService.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

# SIG # Begin signature block
# MIIoLAYJKoZIhvcNAQcCoIIoHTCCKBkCAQExDzANBglghkgBZQMEAgEFADB5Bgor
# BgEEAYI3AgEEoGswaTA0BgorBgEEAYI3AgEeMCYCAwEAAAQQH8w7YFlLCE63JNLG
# KX7zUQIBAAIBAAIBAAIBAAIBADAxMA0GCWCGSAFlAwQCAQUABCBVhpfoTXnfs7U+
# lpXTsl3p7vi/Bm3TsZ5tTay2iS0IgqCCDXYwggX0MIID3KADAgECAhMzAAADrzBA
# DkyjTQVBAAAAAAOvMA0GCSqGSIb3DQEBCwUAMH4xCzAJBgNVBAYTAlVTMRMwEQYD
# VQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVNaWNy
# b3NvZnQgQ29ycG9yYXRpb24xKDAmBgNVBAMTH01pY3Jvc29mdCBDb2RlIFNpZ25p
# bmcgUENBIDIwMTEwHhcNMjMxMTE2MTkwOTAwWhcNMjQxMTE0MTkwOTAwWjB0MQsw
# CQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9u
# ZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMR4wHAYDVQQDExVNaWNy
# b3NvZnQgQ29ycG9yYXRpb24wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIB
# AQDOS8s1ra6f0YGtg0OhEaQa/t3Q+q1MEHhWJhqQVuO5amYXQpy8MDPNoJYk+FWA
# hePP5LxwcSge5aen+f5Q6WNPd6EDxGzotvVpNi5ve0H97S3F7C/axDfKxyNh21MG
# 0W8Sb0vxi/vorcLHOL9i+t2D6yvvDzLlEefUCbQV/zGCBjXGlYJcUj6RAzXyeNAN
# xSpKXAGd7Fh+ocGHPPphcD9LQTOJgG7Y7aYztHqBLJiQQ4eAgZNU4ac6+8LnEGAL
# go1ydC5BJEuJQjYKbNTy959HrKSu7LO3Ws0w8jw6pYdC1IMpdTkk2puTgY2PDNzB
# tLM4evG7FYer3WX+8t1UMYNTAgMBAAGjggFzMIIBbzAfBgNVHSUEGDAWBgorBgEE
# AYI3TAgBBggrBgEFBQcDAzAdBgNVHQ4EFgQURxxxNPIEPGSO8kqz+bgCAQWGXsEw
# RQYDVR0RBD4wPKQ6MDgxHjAcBgNVBAsTFU1pY3Jvc29mdCBDb3Jwb3JhdGlvbjEW
# MBQGA1UEBRMNMjMwMDEyKzUwMTgyNjAfBgNVHSMEGDAWgBRIbmTlUAXTgqoXNzci
# tW2oynUClTBUBgNVHR8ETTBLMEmgR6BFhkNodHRwOi8vd3d3Lm1pY3Jvc29mdC5j
# b20vcGtpb3BzL2NybC9NaWNDb2RTaWdQQ0EyMDExXzIwMTEtMDctMDguY3JsMGEG
# CCsGAQUFBwEBBFUwUzBRBggrBgEFBQcwAoZFaHR0cDovL3d3dy5taWNyb3NvZnQu
# Y29tL3BraW9wcy9jZXJ0cy9NaWNDb2RTaWdQQ0EyMDExXzIwMTEtMDctMDguY3J0
# MAwGA1UdEwEB/wQCMAAwDQYJKoZIhvcNAQELBQADggIBAISxFt/zR2frTFPB45Yd
# mhZpB2nNJoOoi+qlgcTlnO4QwlYN1w/vYwbDy/oFJolD5r6FMJd0RGcgEM8q9TgQ
# 2OC7gQEmhweVJ7yuKJlQBH7P7Pg5RiqgV3cSonJ+OM4kFHbP3gPLiyzssSQdRuPY
# 1mIWoGg9i7Y4ZC8ST7WhpSyc0pns2XsUe1XsIjaUcGu7zd7gg97eCUiLRdVklPmp
# XobH9CEAWakRUGNICYN2AgjhRTC4j3KJfqMkU04R6Toyh4/Toswm1uoDcGr5laYn
# TfcX3u5WnJqJLhuPe8Uj9kGAOcyo0O1mNwDa+LhFEzB6CB32+wfJMumfr6degvLT
# e8x55urQLeTjimBQgS49BSUkhFN7ois3cZyNpnrMca5AZaC7pLI72vuqSsSlLalG
# OcZmPHZGYJqZ0BacN274OZ80Q8B11iNokns9Od348bMb5Z4fihxaBWebl8kWEi2O
# PvQImOAeq3nt7UWJBzJYLAGEpfasaA3ZQgIcEXdD+uwo6ymMzDY6UamFOfYqYWXk
# ntxDGu7ngD2ugKUuccYKJJRiiz+LAUcj90BVcSHRLQop9N8zoALr/1sJuwPrVAtx
# HNEgSW+AKBqIxYWM4Ev32l6agSUAezLMbq5f3d8x9qzT031jMDT+sUAoCw0M5wVt
# CUQcqINPuYjbS1WgJyZIiEkBMIIHejCCBWKgAwIBAgIKYQ6Q0gAAAAAAAzANBgkq
# hkiG9w0BAQsFADCBiDELMAkGA1UEBhMCVVMxEzARBgNVBAgTCldhc2hpbmd0b24x
# EDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jvc29mdCBDb3Jwb3JhdGlv
# bjEyMDAGA1UEAxMpTWljcm9zb2Z0IFJvb3QgQ2VydGlmaWNhdGUgQXV0aG9yaXR5
# IDIwMTEwHhcNMTEwNzA4MjA1OTA5WhcNMjYwNzA4MjEwOTA5WjB+MQswCQYDVQQG
# EwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwG
# A1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSgwJgYDVQQDEx9NaWNyb3NvZnQg
# Q29kZSBTaWduaW5nIFBDQSAyMDExMIICIjANBgkqhkiG9w0BAQEFAAOCAg8AMIIC
# CgKCAgEAq/D6chAcLq3YbqqCEE00uvK2WCGfQhsqa+laUKq4BjgaBEm6f8MMHt03
# a8YS2AvwOMKZBrDIOdUBFDFC04kNeWSHfpRgJGyvnkmc6Whe0t+bU7IKLMOv2akr
# rnoJr9eWWcpgGgXpZnboMlImEi/nqwhQz7NEt13YxC4Ddato88tt8zpcoRb0Rrrg
# OGSsbmQ1eKagYw8t00CT+OPeBw3VXHmlSSnnDb6gE3e+lD3v++MrWhAfTVYoonpy
# 4BI6t0le2O3tQ5GD2Xuye4Yb2T6xjF3oiU+EGvKhL1nkkDstrjNYxbc+/jLTswM9
# sbKvkjh+0p2ALPVOVpEhNSXDOW5kf1O6nA+tGSOEy/S6A4aN91/w0FK/jJSHvMAh
# dCVfGCi2zCcoOCWYOUo2z3yxkq4cI6epZuxhH2rhKEmdX4jiJV3TIUs+UsS1Vz8k
# A/DRelsv1SPjcF0PUUZ3s/gA4bysAoJf28AVs70b1FVL5zmhD+kjSbwYuER8ReTB
# w3J64HLnJN+/RpnF78IcV9uDjexNSTCnq47f7Fufr/zdsGbiwZeBe+3W7UvnSSmn
# Eyimp31ngOaKYnhfsi+E11ecXL93KCjx7W3DKI8sj0A3T8HhhUSJxAlMxdSlQy90
# lfdu+HggWCwTXWCVmj5PM4TasIgX3p5O9JawvEagbJjS4NaIjAsCAwEAAaOCAe0w
# ggHpMBAGCSsGAQQBgjcVAQQDAgEAMB0GA1UdDgQWBBRIbmTlUAXTgqoXNzcitW2o
# ynUClTAZBgkrBgEEAYI3FAIEDB4KAFMAdQBiAEMAQTALBgNVHQ8EBAMCAYYwDwYD
# VR0TAQH/BAUwAwEB/zAfBgNVHSMEGDAWgBRyLToCMZBDuRQFTuHqp8cx0SOJNDBa
# BgNVHR8EUzBRME+gTaBLhklodHRwOi8vY3JsLm1pY3Jvc29mdC5jb20vcGtpL2Ny
# bC9wcm9kdWN0cy9NaWNSb29DZXJBdXQyMDExXzIwMTFfMDNfMjIuY3JsMF4GCCsG
# AQUFBwEBBFIwUDBOBggrBgEFBQcwAoZCaHR0cDovL3d3dy5taWNyb3NvZnQuY29t
# L3BraS9jZXJ0cy9NaWNSb29DZXJBdXQyMDExXzIwMTFfMDNfMjIuY3J0MIGfBgNV
# HSAEgZcwgZQwgZEGCSsGAQQBgjcuAzCBgzA/BggrBgEFBQcCARYzaHR0cDovL3d3
# dy5taWNyb3NvZnQuY29tL3BraW9wcy9kb2NzL3ByaW1hcnljcHMuaHRtMEAGCCsG
# AQUFBwICMDQeMiAdAEwAZQBnAGEAbABfAHAAbwBsAGkAYwB5AF8AcwB0AGEAdABl
# AG0AZQBuAHQALiAdMA0GCSqGSIb3DQEBCwUAA4ICAQBn8oalmOBUeRou09h0ZyKb
# C5YR4WOSmUKWfdJ5DJDBZV8uLD74w3LRbYP+vj/oCso7v0epo/Np22O/IjWll11l
# hJB9i0ZQVdgMknzSGksc8zxCi1LQsP1r4z4HLimb5j0bpdS1HXeUOeLpZMlEPXh6
# I/MTfaaQdION9MsmAkYqwooQu6SpBQyb7Wj6aC6VoCo/KmtYSWMfCWluWpiW5IP0
# wI/zRive/DvQvTXvbiWu5a8n7dDd8w6vmSiXmE0OPQvyCInWH8MyGOLwxS3OW560
# STkKxgrCxq2u5bLZ2xWIUUVYODJxJxp/sfQn+N4sOiBpmLJZiWhub6e3dMNABQam
# ASooPoI/E01mC8CzTfXhj38cbxV9Rad25UAqZaPDXVJihsMdYzaXht/a8/jyFqGa
# J+HNpZfQ7l1jQeNbB5yHPgZ3BtEGsXUfFL5hYbXw3MYbBL7fQccOKO7eZS/sl/ah
# XJbYANahRr1Z85elCUtIEJmAH9AAKcWxm6U/RXceNcbSoqKfenoi+kiVH6v7RyOA
# 9Z74v2u3S5fi63V4GuzqN5l5GEv/1rMjaHXmr/r8i+sLgOppO6/8MO0ETI7f33Vt
# Y5E90Z1WTk+/gFcioXgRMiF670EKsT/7qMykXcGhiJtXcVZOSEXAQsmbdlsKgEhr
# /Xmfwb1tbWrJUnMTDXpQzTGCGgwwghoIAgEBMIGVMH4xCzAJBgNVBAYTAlVTMRMw
# EQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVN
# aWNyb3NvZnQgQ29ycG9yYXRpb24xKDAmBgNVBAMTH01pY3Jvc29mdCBDb2RlIFNp
# Z25pbmcgUENBIDIwMTECEzMAAAOvMEAOTKNNBUEAAAAAA68wDQYJYIZIAWUDBAIB
# BQCgga4wGQYJKoZIhvcNAQkDMQwGCisGAQQBgjcCAQQwHAYKKwYBBAGCNwIBCzEO
# MAwGCisGAQQBgjcCARUwLwYJKoZIhvcNAQkEMSIEINDz2Pa+3Qam6elu7tNAVLEm
# LGzLdLyM57Mwz1LqKb02MEIGCisGAQQBgjcCAQwxNDAyoBSAEgBNAGkAYwByAG8A
# cwBvAGYAdKEagBhodHRwOi8vd3d3Lm1pY3Jvc29mdC5jb20wDQYJKoZIhvcNAQEB
# BQAEggEApfjC49sOIGWNmio6lCVAt5UDVXiIC5xOG6B1Q6z5FGYfftAAA64bGWWe
# dcBh6tVoMlHcEqRvGveKNIf9ffxV8/p/svJwHwl79ez8PmeofzkUt9tMLHI6hsVj
# DlwlsT19laAUpBfpgT3k0QejZjacLbe14j/OTgRC6yFnE6axYGzdhd1i82JYzLCq
# zv6L8bBr7JZ7O0U2hup8788gCWYs215MtyM7LkknL5KSwIWvkbVIWzatY8386Yz7
# 0AAbfYQUdCz5YSS4xDksBLzxBaNVM9vD1VAPJU+9WrowP6uebnAZnW6BxKUipcn0
# RHUqdElkcVUHKDVkvAV3oHvJJQfqIqGCF5YwgheSBgorBgEEAYI3AwMBMYIXgjCC
# F34GCSqGSIb3DQEHAqCCF28wghdrAgEDMQ8wDQYJYIZIAWUDBAIBBQAwggFRBgsq
# hkiG9w0BCRABBKCCAUAEggE8MIIBOAIBAQYKKwYBBAGEWQoDATAxMA0GCWCGSAFl
# AwQCAQUABCBMVHO5bJYaPZ/vKcioppaSzduK9NmJKUsLtd3NyzLqWwIGZfxpNgWz
# GBIyMDI0MDMyNzA3NTE0OC44OVowBIACAfSggdGkgc4wgcsxCzAJBgNVBAYTAlVT
# MRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQK
# ExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xJTAjBgNVBAsTHE1pY3Jvc29mdCBBbWVy
# aWNhIE9wZXJhdGlvbnMxJzAlBgNVBAsTHm5TaGllbGQgVFNTIEVTTjozNzAzLTA1
# RTAtRDk0NzElMCMGA1UEAxMcTWljcm9zb2Z0IFRpbWUtU3RhbXAgU2VydmljZaCC
# Ee0wggcgMIIFCKADAgECAhMzAAAB6pokctVZP2FjAAEAAAHqMA0GCSqGSIb3DQEB
# CwUAMHwxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQH
# EwdSZWRtb25kMR4wHAYDVQQKExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xJjAkBgNV
# BAMTHU1pY3Jvc29mdCBUaW1lLVN0YW1wIFBDQSAyMDEwMB4XDTIzMTIwNjE4NDUz
# MFoXDTI1MDMwNTE4NDUzMFowgcsxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNo
# aW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVNaWNyb3NvZnQgQ29y
# cG9yYXRpb24xJTAjBgNVBAsTHE1pY3Jvc29mdCBBbWVyaWNhIE9wZXJhdGlvbnMx
# JzAlBgNVBAsTHm5TaGllbGQgVFNTIEVTTjozNzAzLTA1RTAtRDk0NzElMCMGA1UE
# AxMcTWljcm9zb2Z0IFRpbWUtU3RhbXAgU2VydmljZTCCAiIwDQYJKoZIhvcNAQEB
# BQADggIPADCCAgoCggIBALULX/FIPyAH1fsu52ijatZvaSypoXrlC0mRtCmaxzob
# huDkw6/pY/+4nhc4m8pf9zW3R6PihYGp0YPpVuNdfhPQp/KVO6WvMq2DGfFmHurW
# 4PQPL/DkbQMkM9vqjFCvPq8xXZnfL1nGN9moGcN+oaif/hUMedmF1qzbay9ILkYf
# LCxDYn3Qwzsvh5xjxOcsjzmRddNURJvT23Eva0cxisH4ocLLTx2zfpqfshw4Z9Ga
# EdsWg9rmib1galUpLzF5PsQDBbtZtcv+Wjmn0pFEiMCWwEEcPVN0YG5ysYLdNBdJ
# On2zsOOS+80W5RrQEqzPpSIIvEkZBJmF3aI4lMR8nV/FiTadjpIIqxX5Wa1XlqI/
# Nj+xagVjnjb7POsA+vh6Wu+v24HpyL8pyL/8Q4RFkRRME9cwT+Jr63yOtPbLe6DX
# kxIJW6E6w2ua5kXBpEKtEQPTLPhX3CUxMYcglbnmI0zcc9UknX285K+sI/2WwRwT
# BZkhDUULI86eQzV+zvzzR1qEBrlSY+oyTlYQrHMM9WnTzVflFDocZVTPpl2BDSNx
# Pn0Qb4IoM9EPqbHyi/MilL+v/AQc8q3mQ6FiuPJAddz0ocpNZ9ekBWPVLKq3lfie
# v4yl65u/438+NAQ+vSJgkONLMmuoguEGzmnK1vq/JHwdRUyn6YADiteM7Dja+Qd9
# AgMBAAGjggFJMIIBRTAdBgNVHQ4EFgQUK4FFJaJR5ukXQFTUxMhyiwVuWV4wHwYD
# VR0jBBgwFoAUn6cVXQBeYl2D9OXSZacbUzUZ6XIwXwYDVR0fBFgwVjBUoFKgUIZO
# aHR0cDovL3d3dy5taWNyb3NvZnQuY29tL3BraW9wcy9jcmwvTWljcm9zb2Z0JTIw
# VGltZS1TdGFtcCUyMFBDQSUyMDIwMTAoMSkuY3JsMGwGCCsGAQUFBwEBBGAwXjBc
# BggrBgEFBQcwAoZQaHR0cDovL3d3dy5taWNyb3NvZnQuY29tL3BraW9wcy9jZXJ0
# cy9NaWNyb3NvZnQlMjBUaW1lLVN0YW1wJTIwUENBJTIwMjAxMCgxKS5jcnQwDAYD
# VR0TAQH/BAIwADAWBgNVHSUBAf8EDDAKBggrBgEFBQcDCDAOBgNVHQ8BAf8EBAMC
# B4AwDQYJKoZIhvcNAQELBQADggIBACiDrVZeP37+fFVtfcbfsqC/Kg0Ce67bDceh
# ZmPcfRgJ5Ddv0pJlOFVOFbiIVwesqeEUwFtclfi5AjneQ5ZJpYJpXfELOelG3dzj
# +BKfd287/UY/cwmSkl+CjnoKBL3Ms6I/fWR+alR0+p6RlviK8xHoug9vkc2WrRZs
# GnMVu2xOM2tPJ+qpyoDBzqv30N/ZRBOoNrS/PCkDwLGICDYqVs/IzAE49yv2ElPy
# walf9mEsOHXV1lxtQDNcejVEmitJJ+1Vr2EtafPEbMQZp89TAuagROKE4YuohCUK
# m+v3geJqTQarTBjqV25RCOT+XFngTMDD9wYx6TwndB2I1Ly726NiHUHs0uvq3ciC
# V9JwNXdt1VZ63WK1NSgpVEsiK9EPABPt1EfXcKrfaPYkbkFi79eK1ETxx3NomYNU
# HNiGU+X1Be8L7qpHwjo0g3/33XhtOr9LiDoUXh/V2LFTETiqV9Q8yLEavQW3j9LQ
# /h/CaGz5YdGfrY8HiPfMIeLEokKxGf0hHcTEFApB0yLlq6KoHrFAEANR/4XuFIpl
# 9sDywVIWt4tKqG+P6pRAXzg1zG5rGlslZWmw7XwgvhBu3jkLP9AxrsSYwY2ftrww
# ze5NA6VDLS7pz+OrXXWLUmoyNrJNx5Bk0wEwzkQxzkOvmbdPhsOP1ZM0uA/xIV7c
# SpNpZUw5MIIHcTCCBVmgAwIBAgITMwAAABXF52ueAptJmQAAAAAAFTANBgkqhkiG
# 9w0BAQsFADCBiDELMAkGA1UEBhMCVVMxEzARBgNVBAgTCldhc2hpbmd0b24xEDAO
# BgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jvc29mdCBDb3Jwb3JhdGlvbjEy
# MDAGA1UEAxMpTWljcm9zb2Z0IFJvb3QgQ2VydGlmaWNhdGUgQXV0aG9yaXR5IDIw
# MTAwHhcNMjEwOTMwMTgyMjI1WhcNMzAwOTMwMTgzMjI1WjB8MQswCQYDVQQGEwJV
# UzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UE
# ChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSYwJAYDVQQDEx1NaWNyb3NvZnQgVGlt
# ZS1TdGFtcCBQQ0EgMjAxMDCCAiIwDQYJKoZIhvcNAQEBBQADggIPADCCAgoCggIB
# AOThpkzntHIhC3miy9ckeb0O1YLT/e6cBwfSqWxOdcjKNVf2AX9sSuDivbk+F2Az
# /1xPx2b3lVNxWuJ+Slr+uDZnhUYjDLWNE893MsAQGOhgfWpSg0S3po5GawcU88V2
# 9YZQ3MFEyHFcUTE3oAo4bo3t1w/YJlN8OWECesSq/XJprx2rrPY2vjUmZNqYO7oa
# ezOtgFt+jBAcnVL+tuhiJdxqD89d9P6OU8/W7IVWTe/dvI2k45GPsjksUZzpcGkN
# yjYtcI4xyDUoveO0hyTD4MmPfrVUj9z6BVWYbWg7mka97aSueik3rMvrg0XnRm7K
# MtXAhjBcTyziYrLNueKNiOSWrAFKu75xqRdbZ2De+JKRHh09/SDPc31BmkZ1zcRf
# NN0Sidb9pSB9fvzZnkXftnIv231fgLrbqn427DZM9ituqBJR6L8FA6PRc6ZNN3SU
# HDSCD/AQ8rdHGO2n6Jl8P0zbr17C89XYcz1DTsEzOUyOArxCaC4Q6oRRRuLRvWoY
# WmEBc8pnol7XKHYC4jMYctenIPDC+hIK12NvDMk2ZItboKaDIV1fMHSRlJTYuVD5
# C4lh8zYGNRiER9vcG9H9stQcxWv2XFJRXRLbJbqvUAV6bMURHXLvjflSxIUXk8A8
# FdsaN8cIFRg/eKtFtvUeh17aj54WcmnGrnu3tz5q4i6tAgMBAAGjggHdMIIB2TAS
# BgkrBgEEAYI3FQEEBQIDAQABMCMGCSsGAQQBgjcVAgQWBBQqp1L+ZMSavoKRPEY1
# Kc8Q/y8E7jAdBgNVHQ4EFgQUn6cVXQBeYl2D9OXSZacbUzUZ6XIwXAYDVR0gBFUw
# UzBRBgwrBgEEAYI3TIN9AQEwQTA/BggrBgEFBQcCARYzaHR0cDovL3d3dy5taWNy
# b3NvZnQuY29tL3BraW9wcy9Eb2NzL1JlcG9zaXRvcnkuaHRtMBMGA1UdJQQMMAoG
# CCsGAQUFBwMIMBkGCSsGAQQBgjcUAgQMHgoAUwB1AGIAQwBBMAsGA1UdDwQEAwIB
# hjAPBgNVHRMBAf8EBTADAQH/MB8GA1UdIwQYMBaAFNX2VsuP6KJcYmjRPZSQW9fO
# mhjEMFYGA1UdHwRPME0wS6BJoEeGRWh0dHA6Ly9jcmwubWljcm9zb2Z0LmNvbS9w
# a2kvY3JsL3Byb2R1Y3RzL01pY1Jvb0NlckF1dF8yMDEwLTA2LTIzLmNybDBaBggr
# BgEFBQcBAQROMEwwSgYIKwYBBQUHMAKGPmh0dHA6Ly93d3cubWljcm9zb2Z0LmNv
# bS9wa2kvY2VydHMvTWljUm9vQ2VyQXV0XzIwMTAtMDYtMjMuY3J0MA0GCSqGSIb3
# DQEBCwUAA4ICAQCdVX38Kq3hLB9nATEkW+Geckv8qW/qXBS2Pk5HZHixBpOXPTEz
# tTnXwnE2P9pkbHzQdTltuw8x5MKP+2zRoZQYIu7pZmc6U03dmLq2HnjYNi6cqYJW
# AAOwBb6J6Gngugnue99qb74py27YP0h1AdkY3m2CDPVtI1TkeFN1JFe53Z/zjj3G
# 82jfZfakVqr3lbYoVSfQJL1AoL8ZthISEV09J+BAljis9/kpicO8F7BUhUKz/Aye
# ixmJ5/ALaoHCgRlCGVJ1ijbCHcNhcy4sa3tuPywJeBTpkbKpW99Jo3QMvOyRgNI9
# 5ko+ZjtPu4b6MhrZlvSP9pEB9s7GdP32THJvEKt1MMU0sHrYUP4KWN1APMdUbZ1j
# dEgssU5HLcEUBHG/ZPkkvnNtyo4JvbMBV0lUZNlz138eW0QBjloZkWsNn6Qo3GcZ
# KCS6OEuabvshVGtqRRFHqfG3rsjoiV5PndLQTHa1V1QJsWkBRH58oWFsc/4Ku+xB
# Zj1p/cvBQUl+fpO+y/g75LcVv7TOPqUxUYS8vwLBgqJ7Fx0ViY1w/ue10CgaiQuP
# Ntq6TPmb/wrpNPgkNWcr4A245oyZ1uEi6vAnQj0llOZ0dFtq0Z4+7X6gMTN9vMvp
# e784cETRkPHIqzqKOghif9lwY1NNje6CbaUFEMFxBmoQtB1VM1izoXBm8qGCA1Aw
# ggI4AgEBMIH5oYHRpIHOMIHLMQswCQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGlu
# Z3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBv
# cmF0aW9uMSUwIwYDVQQLExxNaWNyb3NvZnQgQW1lcmljYSBPcGVyYXRpb25zMScw
# JQYDVQQLEx5uU2hpZWxkIFRTUyBFU046MzcwMy0wNUUwLUQ5NDcxJTAjBgNVBAMT
# HE1pY3Jvc29mdCBUaW1lLVN0YW1wIFNlcnZpY2WiIwoBATAHBgUrDgMCGgMVAInb
# HtxB+OlGyQnxQYhy04KSYSSPoIGDMIGApH4wfDELMAkGA1UEBhMCVVMxEzARBgNV
# BAgTCldhc2hpbmd0b24xEDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jv
# c29mdCBDb3Jwb3JhdGlvbjEmMCQGA1UEAxMdTWljcm9zb2Z0IFRpbWUtU3RhbXAg
# UENBIDIwMTAwDQYJKoZIhvcNAQELBQACBQDpriehMCIYDzIwMjQwMzI3MDUwNTM3
# WhgPMjAyNDAzMjgwNTA1MzdaMHcwPQYKKwYBBAGEWQoEATEvMC0wCgIFAOmuJ6EC
# AQAwCgIBAAICGSgCAf8wBwIBAAICEtMwCgIFAOmveSECAQAwNgYKKwYBBAGEWQoE
# AjEoMCYwDAYKKwYBBAGEWQoDAqAKMAgCAQACAwehIKEKMAgCAQACAwGGoDANBgkq
# hkiG9w0BAQsFAAOCAQEANITd8SWAEawNW+sCcmdfXFphZ7kyQPTdIHFAsxi490YA
# +JsGQYKCMHR1w1iOJfcUtluSgmp3ciOIgqS8TjXC8dMjmEJrhnhBmn1TjucxNRId
# fEXvrf58Qs85GUZKUaqLUu4qBOyrTdoEz5u0mRRUXBwQNnRmmdQ5btxz74zk8tPy
# WJk0E8Q0wqDXhWA/eFLsLA1GqYHqmRoabX/lQ+o15ezCxKKEmRB0KSOB6lVqABZ0
# n79mMBuaAUaOsUCGeyZUXV9dhftu7EGYjlW9Smd0hW/bKe2sCJgj8icZsADwB+s1
# 0fKCkP58i+iD9xiP6Aqp9inDbgLUy3gB9qhgyY0BVDGCBA0wggQJAgEBMIGTMHwx
# CzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRt
# b25kMR4wHAYDVQQKExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xJjAkBgNVBAMTHU1p
# Y3Jvc29mdCBUaW1lLVN0YW1wIFBDQSAyMDEwAhMzAAAB6pokctVZP2FjAAEAAAHq
# MA0GCWCGSAFlAwQCAQUAoIIBSjAaBgkqhkiG9w0BCQMxDQYLKoZIhvcNAQkQAQQw
# LwYJKoZIhvcNAQkEMSIEIOeJCLtCn2lP75T8g0iPLCbB+IfvphPfu20WdO2pbOE2
# MIH6BgsqhkiG9w0BCRACLzGB6jCB5zCB5DCBvQQgKY+h1eNkNHiLCDSW0sA1cGHk
# bW4qooi+ryyMp6S4ZngwgZgwgYCkfjB8MQswCQYDVQQGEwJVUzETMBEGA1UECBMK
# V2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0
# IENvcnBvcmF0aW9uMSYwJAYDVQQDEx1NaWNyb3NvZnQgVGltZS1TdGFtcCBQQ0Eg
# MjAxMAITMwAAAeqaJHLVWT9hYwABAAAB6jAiBCDasfAnTlOOjS5jPUU2r3wl8Rd/
# DqowMwZPUoPAG2mrizANBgkqhkiG9w0BAQsFAASCAgB9zkWEb4t/gKdXjfBSA7EM
# Cp6cIKilu15O6Q0TmO8ryMfe8UeCO2lET4DEEaJPcpL4/tLJz9IzU0F+5VTLvvf1
# zt1Pz9iHjqQYH7WcAxjn32lo5878tH9u6dG3p5KuRr6xdM9cqxerwtF1rdrZX330
# fKi7mV3B6+Tr3tCZGj9c+u6ppr1n1J3NMwN/okvtTAkrB3v0TYlPtb3dipmp9kqy
# XFe6K6XtnRrYNkpZwlVlG0sDOzfDOg5cVIZ+csw6rUl0wb6yFU0YjK/iu4ID6g+2
# y6gdo6pc6NB9O6+yigfcXxsmT2/IFMz3Zb2OVCwdJF2R/u1pxFTTFkUXgPEqiPha
# UiRgrbvhpEA6ztD9y9YNdYH5aCjvd/NqCMd9zvW95j++MxFW2QqCoyT3Rjxt8hwd
# q4Ms4QL9a94AUBtY7l6IJntc8U5cEPfizHV60mB0WfFuMvo0ppiYsz1xvK5sDKQ0
# DIBxFtfc22j8iJO/YmyBY1zyBrt47Bd4SplDIaUjwzbEsJqdH+JR/loLcgv3DTez
# PrLZoGlpqqdWXdNWthyfOyg6Ejpnn1DmN4R/yy0bp5iPx1n/7PHGoi6zTihPb2Ig
# yF+In6/mv+/fK3DKEpOgt5Di7JnRxK2Mc8Uwmfg9EL1nh6wxZHpTJpvYdOpyBNI8
# bUIP1v2VSCH+cjhBzo4wTQ==
# SIG # End signature block