Az.CustomLocation

0.2.0

CustomLocation.Autorest/exports/ProxyCmdletDefinitions.ps1


# ----------------------------------------------------------------------------------
# Copyright (c) Microsoft Corporation. All rights reserved.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Code generated by Microsoft (R) AutoRest Code Generator.Changes may cause incorrect behavior and will be lost if the code
# is regenerated.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Returns the target resource group associated with the resource sync rules of the Custom Location that match the rules passed in with the Find Target Resource Group Request.
.Description
Returns the target resource group associated with the resource sync rules of the Custom Location that match the rules passed in with the Find Target Resource Group Request.
.Example
Find-AzCustomLocationTargetResourceGroup -ResourceGroupName azps_test_cluster -CustomLocationName azps-customlocation -Label @{"Key1"="Value1"} -PassThru
.Example
$obj = Get-AzCustomLocation -ResourceGroupName azps_test_cluster -Name azps-customlocation
Find-AzCustomLocationTargetResourceGroup -InputObject $obj -Label @{"Key1"="Value1"} -PassThru
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationFindTargetResourceGroupResult
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <ICustomLocationIdentity>: Identity Parameter
  [ChildResourceName <String>]: Resource Sync Rule name.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ResourceName <String>]: Custom Locations name.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.customlocation/find-azcustomlocationtargetresourcegroup
#>
function Find-AzCustomLocationTargetResourceGroup {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationFindTargetResourceGroupResult])]
[CmdletBinding(DefaultParameterSetName='FindExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='FindExpanded', Mandatory)]
    [Parameter(ParameterSetName='FindViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='FindViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Custom Locations name.
    ${CustomLocationName},

    [Parameter(ParameterSetName='FindExpanded', Mandatory)]
    [Parameter(ParameterSetName='FindViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='FindViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='FindExpanded')]
    [Parameter(ParameterSetName='FindViaJsonFilePath')]
    [Parameter(ParameterSetName='FindViaJsonString')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='FindViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='FindExpanded')]
    [Parameter(ParameterSetName='FindViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationFindTargetResourceGroupPropertiesLabels]))]
    [System.Collections.Hashtable]
    # Labels of the custom resource, this is a map of {key,value} pairs.
    ${Label},

    [Parameter(ParameterSetName='FindViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Find operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='FindViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Json string supplied to the Find operation
    ${JsonString},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            FindExpanded = 'Az.CustomLocation.private\Find-AzCustomLocationTargetResourceGroup_FindExpanded';
            FindViaIdentityExpanded = 'Az.CustomLocation.private\Find-AzCustomLocationTargetResourceGroup_FindViaIdentityExpanded';
            FindViaJsonFilePath = 'Az.CustomLocation.private\Find-AzCustomLocationTargetResourceGroup_FindViaJsonFilePath';
            FindViaJsonString = 'Az.CustomLocation.private\Find-AzCustomLocationTargetResourceGroup_FindViaJsonString';
        }
        if (('FindExpanded', 'FindViaJsonFilePath', 'FindViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Gets the list of the Enabled Resource Types.
.Description
Gets the list of the Enabled Resource Types.
.Example
Get-AzCustomLocationEnabledResourceType -ResourceGroupName azps_test_group -Name azps_test_cluster
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.IEnabledResourceType
.Link
https://learn.microsoft.com/powershell/module/az.customlocation/get-azcustomlocationenabledresourcetype
#>
function Get-AzCustomLocationEnabledResourceType {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.IEnabledResourceType])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Custom Locations name.
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            List = 'Az.CustomLocation.private\Get-AzCustomLocationEnabledResourceType_List';
        }
        if (('List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Gets the details of the resourceSyncRule with a specified resource group, subscription id Custom Location resource name and Resource Sync Rule name.
.Description
Gets the details of the resourceSyncRule with a specified resource group, subscription id Custom Location resource name and Resource Sync Rule name.
.Example
Get-AzCustomLocationResourceSyncRule -ResourceGroupName azps_test_cluster -CustomLocationName azps-customlocation
.Example
Get-AzCustomLocationResourceSyncRule -ResourceGroupName azps_test_cluster -CustomLocationName azps-customlocation -Name azps-resourcesyncrule
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.IResourceSyncRule
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
CUSTOMLOCATIONINPUTOBJECT <ICustomLocationIdentity>: Identity Parameter
  [ChildResourceName <String>]: Resource Sync Rule name.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ResourceName <String>]: Custom Locations name.
  [SubscriptionId <String>]: The ID of the target subscription.
 
INPUTOBJECT <ICustomLocationIdentity>: Identity Parameter
  [ChildResourceName <String>]: Resource Sync Rule name.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ResourceName <String>]: Custom Locations name.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.customlocation/get-azcustomlocationresourcesyncrule
#>
function Get-AzCustomLocationResourceSyncRule {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.IResourceSyncRule])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Custom Locations name.
    ${CustomLocationName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='GetViaIdentityCustomlocation', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Resource Sync Rule name.
    ${Name},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='GetViaIdentityCustomlocation', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity]
    # Identity Parameter
    ${CustomlocationInputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.CustomLocation.private\Get-AzCustomLocationResourceSyncRule_Get';
            GetViaIdentity = 'Az.CustomLocation.private\Get-AzCustomLocationResourceSyncRule_GetViaIdentity';
            GetViaIdentityCustomlocation = 'Az.CustomLocation.private\Get-AzCustomLocationResourceSyncRule_GetViaIdentityCustomlocation';
            List = 'Az.CustomLocation.private\Get-AzCustomLocationResourceSyncRule_List';
        }
        if (('Get', 'List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Gets the details of the customLocation with a specified resource group and name.
.Description
Gets the details of the customLocation with a specified resource group and name.
.Example
Get-AzCustomLocation
.Example
Get-AzCustomLocation -ResourceGroupName azps_test_cluster
.Example
Get-AzCustomLocation -ResourceGroupName azps_test_cluster -Name azps-customlocation
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocation
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <ICustomLocationIdentity>: Identity Parameter
  [ChildResourceName <String>]: Resource Sync Rule name.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ResourceName <String>]: Custom Locations name.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.customlocation/get-azcustomlocation
#>
function Get-AzCustomLocation {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocation])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Custom Locations name.
    ${Name},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Parameter(ParameterSetName='List1')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.CustomLocation.private\Get-AzCustomLocation_Get';
            GetViaIdentity = 'Az.CustomLocation.private\Get-AzCustomLocation_GetViaIdentity';
            List = 'Az.CustomLocation.private\Get-AzCustomLocation_List';
            List1 = 'Az.CustomLocation.private\Get-AzCustomLocation_List1';
        }
        if (('Get', 'List', 'List1') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Create a Resource Sync Rule in the parent Custom Location, Subscription Id and Resource Group
.Description
Create a Resource Sync Rule in the parent Custom Location, Subscription Id and Resource Group
.Example
$MatchExpressions = New-AzCustomLocationMatchExpressionsObject -Key "key4" -Operator "In" -Value "value4"
New-AzCustomLocationResourceSyncRule -Name azps-resourcesyncrule -ResourceGroupName azps_test_cluster -CustomLocationName azps-customlocation -Location eastus -Priority 999 -SelectorMatchExpression $MatchExpressions -SelectorMatchLabel @{"Key1"="Value1"} -TargetResourceGroup "/subscriptions/{subId}/resourceGroups/azps_test_cluster"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.IResourceSyncRule
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
CUSTOMLOCATIONINPUTOBJECT <ICustomLocationIdentity>: Identity Parameter
  [ChildResourceName <String>]: Resource Sync Rule name.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ResourceName <String>]: Custom Locations name.
  [SubscriptionId <String>]: The ID of the target subscription.
 
INPUTOBJECT <ICustomLocationIdentity>: Identity Parameter
  [ChildResourceName <String>]: Resource Sync Rule name.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ResourceName <String>]: Custom Locations name.
  [SubscriptionId <String>]: The ID of the target subscription.
 
SELECTORMATCHEXPRESSION <IMatchExpressionsProperties[]>: MatchExpressions is a list of resource selector requirements. Valid operators include In, NotIn, Exists, and DoesNotExist. The values set must be non-empty in the case of In and NotIn. The values set must be empty in the case of Exists and DoesNotExist.
  [Key <String>]: Key is the label key that the selector applies to.
  [Operator <String>]: The Operator field represents a key's relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.
  [Value <List<String>>]: The label value
.Link
https://learn.microsoft.com/powershell/module/az.customlocation/new-azcustomlocationresourcesyncrule
#>
function New-AzCustomLocationResourceSyncRule {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.IResourceSyncRule])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Custom Locations name.
    ${CustomLocationName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaIdentityCustomlocationExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Resource Sync Rule name.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaJsonFilePath')]
    [Parameter(ParameterSetName='CreateViaJsonString')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityCustomlocationExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity]
    # Identity Parameter
    ${CustomlocationInputObject},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaIdentityCustomlocationExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityCustomlocationExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.Int32]
    # Priority represents a priority of the Resource Sync Rule
    ${Priority},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityCustomlocationExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityExpanded')]
    [AllowEmptyCollection()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.IMatchExpressionsProperties[]]
    # MatchExpressions is a list of resource selector requirements.
    # Valid operators include In, NotIn, Exists, and DoesNotExist.
    # The values set must be non-empty in the case of In and NotIn.
    # The values set must be empty in the case of Exists and DoesNotExist.
    ${SelectorMatchExpression},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityCustomlocationExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.IResourceSyncRulePropertiesSelectorMatchLabels]))]
    [System.Collections.Hashtable]
    # MatchLabels is a map of {key,value} pairs.
    # A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is 'key', the operator is 'In', and the values array contains only 'value'.
    ${SelectorMatchLabel},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityCustomlocationExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityCustomlocationExpanded')]
    [Parameter(ParameterSetName='CreateViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # For an unmapped custom resource, its labels will be used to find matching resource sync rules.
    # If this resource sync rule is one of the matching rules with highest priority, then the unmapped custom resource will be projected to the target resource group associated with this resource sync rule.
    # The user creating this resource sync rule should have write permissions on the target resource group and this write permission will be validated when creating the resource sync rule.
    ${TargetResourceGroup},

    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Create operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Json string supplied to the Create operation
    ${JsonString},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CreateExpanded = 'Az.CustomLocation.private\New-AzCustomLocationResourceSyncRule_CreateExpanded';
            CreateViaIdentityCustomlocationExpanded = 'Az.CustomLocation.private\New-AzCustomLocationResourceSyncRule_CreateViaIdentityCustomlocationExpanded';
            CreateViaIdentityExpanded = 'Az.CustomLocation.private\New-AzCustomLocationResourceSyncRule_CreateViaIdentityExpanded';
            CreateViaJsonFilePath = 'Az.CustomLocation.private\New-AzCustomLocationResourceSyncRule_CreateViaJsonFilePath';
            CreateViaJsonString = 'Az.CustomLocation.private\New-AzCustomLocationResourceSyncRule_CreateViaJsonString';
        }
        if (('CreateExpanded', 'CreateViaJsonFilePath', 'CreateViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Create a Custom Location in the specified Subscription and Resource Group
.Description
Create a Custom Location in the specified Subscription and Resource Group
.Example
$HostResourceId = (Get-AzConnectedKubernetes -ClusterName azps-connect -ResourceGroupName azps_test_cluster).Id
$ClusterExtensionId = (Get-AzKubernetesExtension -ClusterName azps-connect -ClusterType ConnectedClusters -ResourceGroupName azps_test_cluster -Name azps-extension).Id
New-AzCustomLocation -ResourceGroupName azps_test_cluster -Name azps-customlocation -Location eastus -ClusterExtensionId $ClusterExtensionId -HostResourceId $HostResourceId -Namespace azps-namespace
.Example
$HostResourceId = (Get-AzConnectedKubernetes -ClusterName azps-connect -ResourceGroupName group01).Id
$ClusterExtensionId = (Get-AzKubernetesExtension -ClusterName azps-connect -ClusterType ConnectedClusters -ResourceGroupName group01 -Name azps-extension).Id
New-AzCustomLocation -ResourceGroupName group01 -Name azps-customlocation -Location eastus -ClusterExtensionId $ClusterExtensionId -HostResourceId $HostResourceId -Namespace azps-namespace -EnableSystemAssignedIdentity
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocation
.Link
https://learn.microsoft.com/powershell/module/az.customlocation/new-azcustomlocation
#>
function New-AzCustomLocation {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocation])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Custom Locations name.
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [AllowEmptyCollection()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String[]]
    # Contains the reference to the add-on that contains charts to deploy CRDs and operators.
    ${ClusterExtensionId},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Connected Cluster or AKS Cluster.
    # The Custom Locations RP will perform a checkAccess API for listAdminCredentials permissions.
    ${HostResourceId},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Kubernetes namespace that will be created on the specified cluster.
    ${Namespace},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # The type of the Custom Locations authentication
    ${AuthenticationType},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # The kubeconfig value.
    ${AuthenticationValue},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Display name for the Custom Locations location.
    ${DisplayName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Decides if enable a system assigned identity for the resource.
    ${EnableSystemAssignedIdentity},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter(ParameterSetName='CreateViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Create operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='CreateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Json string supplied to the Create operation
    ${JsonString},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CreateExpanded = 'Az.CustomLocation.private\New-AzCustomLocation_CreateExpanded';
            CreateViaJsonFilePath = 'Az.CustomLocation.private\New-AzCustomLocation_CreateViaJsonFilePath';
            CreateViaJsonString = 'Az.CustomLocation.private\New-AzCustomLocation_CreateViaJsonString';
        }
        if (('CreateExpanded', 'CreateViaJsonFilePath', 'CreateViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('HostType') ) {
            $PSBoundParameters['HostType'] = "Kubernetes"
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Deletes the Resource Sync Rule with the specified Resource Sync Rule Name, Custom Location Resource Name, Resource Group, and Subscription Id.
.Description
Deletes the Resource Sync Rule with the specified Resource Sync Rule Name, Custom Location Resource Name, Resource Group, and Subscription Id.
.Example
Remove-AzCustomLocationResourceSyncRule -CustomLocationName azps-customlocation -Name azps-resourcesyncrule -ResourceGroupName azps_test_cluster
.Example
$obj = Get-AzCustomLocationResourceSyncRule -ResourceGroupName azps_test_cluster -CustomLocationName azps-customlocation -Name azps-resourcesyncrule
Remove-AzCustomLocationResourceSyncRule -InputObject $obj
.Example
$obj = Get-AzCustomLocation -ResourceGroupName azps_test_cluster -Name azps-customlocation
Remove-AzCustomLocationResourceSyncRule -CustomlocationInputObject $obj -Name azps-resourcesyncrule
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
CUSTOMLOCATIONINPUTOBJECT <ICustomLocationIdentity>: Identity Parameter
  [ChildResourceName <String>]: Resource Sync Rule name.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ResourceName <String>]: Custom Locations name.
  [SubscriptionId <String>]: The ID of the target subscription.
 
INPUTOBJECT <ICustomLocationIdentity>: Identity Parameter
  [ChildResourceName <String>]: Resource Sync Rule name.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ResourceName <String>]: Custom Locations name.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.customlocation/remove-azcustomlocationresourcesyncrule
#>
function Remove-AzCustomLocationResourceSyncRule {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Custom Locations name.
    ${CustomLocationName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Parameter(ParameterSetName='DeleteViaIdentityCustomlocation', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Resource Sync Rule name.
    ${Name},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='DeleteViaIdentityCustomlocation', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity]
    # Identity Parameter
    ${CustomlocationInputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.CustomLocation.private\Remove-AzCustomLocationResourceSyncRule_Delete';
            DeleteViaIdentity = 'Az.CustomLocation.private\Remove-AzCustomLocationResourceSyncRule_DeleteViaIdentity';
            DeleteViaIdentityCustomlocation = 'Az.CustomLocation.private\Remove-AzCustomLocationResourceSyncRule_DeleteViaIdentityCustomlocation';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Deletes the Custom Location with the specified Resource Name, Resource Group, and Subscription Id.
.Description
Deletes the Custom Location with the specified Resource Name, Resource Group, and Subscription Id.
.Example
Remove-AzCustomLocation -ResourceGroupName azps_test_cluster -Name azps-customlocation
.Example
$obj = Get-AzCustomLocation -ResourceGroupName azps_test_cluster -Name azps-customlocation
Remove-AzCustomLocation -InputObject $obj
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <ICustomLocationIdentity>: Identity Parameter
  [ChildResourceName <String>]: Resource Sync Rule name.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ResourceName <String>]: Custom Locations name.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.customlocation/remove-azcustomlocation
#>
function Remove-AzCustomLocation {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Custom Locations name.
    ${Name},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.CustomLocation.private\Remove-AzCustomLocation_Delete';
            DeleteViaIdentity = 'Az.CustomLocation.private\Remove-AzCustomLocation_DeleteViaIdentity';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Update a Resource Sync Rule with the specified Resource Sync Rule name in the specified Resource Group, Subscription and Custom Location name.
.Description
Update a Resource Sync Rule with the specified Resource Sync Rule name in the specified Resource Group, Subscription and Custom Location name.
.Example
$MatchExpressions = New-AzCustomLocationMatchExpressionsObject -Key "key4" -Operator "In" -Value "value4"
Update-AzCustomLocationResourceSyncRule -Name azps-resourcesyncrule -ResourceGroupName azps_test_cluster -CustomLocationName azps-customlocation -Priority 999 -SelectorMatchExpression $MatchExpressions -SelectorMatchLabel @{"Key1"="Value1"} -TargetResourceGroup "/subscriptions/{subId}/resourceGroups/azps_test_cluster" -Tag @{"abc"="123"}
.Example
$MatchExpressions = New-AzCustomLocationMatchExpressionsObject -Key "key4" -Operator "In" -Value "value4"
$obj = Get-AzCustomLocationResourceSyncRule -ResourceGroupName azps_test_cluster -CustomLocationName azps-customlocation -Name azps-resourcesyncrule
Update-AzCustomLocationResourceSyncRule -InputObject $obj -Priority 999 -SelectorMatchExpression $MatchExpressions -SelectorMatchLabel @{"Key1"="Value1"} -TargetResourceGroup "/subscriptions/{subId}/resourceGroups/azps_test_cluster" -Tag @{"abc"="123"}
.Example
$MatchExpressions = New-AzCustomLocationMatchExpressionsObject -Key "key4" -Operator "In" -Value "value4"
$obj = Get-AzCustomLocation -ResourceGroupName azps_test_cluster -Name azps-customlocation
Update-AzCustomLocationResourceSyncRule -CustomlocationInputObject $obj -Name azps-resourcesyncrule -Priority 999 -SelectorMatchExpression $MatchExpressions -SelectorMatchLabel @{"Key1"="Value1"} -TargetResourceGroup "/subscriptions/{subId}/resourceGroups/azps_test_cluster" -Tag @{"abc"="123"}
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.IResourceSyncRule
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
CUSTOMLOCATIONINPUTOBJECT <ICustomLocationIdentity>: Identity Parameter
  [ChildResourceName <String>]: Resource Sync Rule name.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ResourceName <String>]: Custom Locations name.
  [SubscriptionId <String>]: The ID of the target subscription.
 
INPUTOBJECT <ICustomLocationIdentity>: Identity Parameter
  [ChildResourceName <String>]: Resource Sync Rule name.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ResourceName <String>]: Custom Locations name.
  [SubscriptionId <String>]: The ID of the target subscription.
 
SELECTORMATCHEXPRESSION <IMatchExpressionsProperties[]>: MatchExpressions is a list of resource selector requirements. Valid operators include In, NotIn, Exists, and DoesNotExist. The values set must be non-empty in the case of In and NotIn. The values set must be empty in the case of Exists and DoesNotExist.
  [Key <String>]: Key is the label key that the selector applies to.
  [Operator <String>]: The Operator field represents a key's relationship to a set of values. Valid operators are In, NotIn, Exists and DoesNotExist.
  [Value <List<String>>]: The label value
.Link
https://learn.microsoft.com/powershell/module/az.customlocation/update-azcustomlocationresourcesyncrule
#>
function Update-AzCustomLocationResourceSyncRule {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.IResourceSyncRule])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Custom Locations name.
    ${CustomLocationName},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaIdentityCustomlocationExpanded', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Resource Sync Rule name.
    ${Name},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonFilePath', Mandatory)]
    [Parameter(ParameterSetName='UpdateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateViaJsonFilePath')]
    [Parameter(ParameterSetName='UpdateViaJsonString')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateViaIdentityCustomlocationExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity]
    # Identity Parameter
    ${CustomlocationInputObject},

    [Parameter(ParameterSetName='UpdateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityCustomlocationExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.Int32]
    # Priority represents a priority of the Resource Sync Rule
    ${Priority},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityCustomlocationExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityExpanded')]
    [AllowEmptyCollection()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.IMatchExpressionsProperties[]]
    # MatchExpressions is a list of resource selector requirements.
    # Valid operators include In, NotIn, Exists, and DoesNotExist.
    # The values set must be non-empty in the case of In and NotIn.
    # The values set must be empty in the case of Exists and DoesNotExist.
    ${SelectorMatchExpression},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityCustomlocationExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.IResourceSyncRulePropertiesSelectorMatchLabels]))]
    [System.Collections.Hashtable]
    # MatchLabels is a map of {key,value} pairs.
    # A single {key,value} in the matchLabels map is equivalent to an element of matchExpressions, whose key field is 'key', the operator is 'In', and the values array contains only 'value'.
    ${SelectorMatchLabel},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityCustomlocationExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.IPatchableResourceSyncRuleTags]))]
    [System.Collections.Hashtable]
    # Resource tags
    ${Tag},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityCustomlocationExpanded')]
    [Parameter(ParameterSetName='UpdateViaIdentityExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # For an unmapped custom resource, its labels will be used to find matching resource sync rules.
    # If this resource sync rule is one of the matching rules with highest priority, then the unmapped custom resource will be projected to the target resource group associated with this resource sync rule.
    # The user creating this resource sync rule should have write permissions on the target resource group and this write permission will be validated when creating the resource sync rule.
    ${TargetResourceGroup},

    [Parameter(ParameterSetName='UpdateViaJsonFilePath', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Path of Json file supplied to the Update operation
    ${JsonFilePath},

    [Parameter(ParameterSetName='UpdateViaJsonString', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Json string supplied to the Update operation
    ${JsonString},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            UpdateExpanded = 'Az.CustomLocation.private\Update-AzCustomLocationResourceSyncRule_UpdateExpanded';
            UpdateViaIdentityCustomlocationExpanded = 'Az.CustomLocation.private\Update-AzCustomLocationResourceSyncRule_UpdateViaIdentityCustomlocationExpanded';
            UpdateViaIdentityExpanded = 'Az.CustomLocation.private\Update-AzCustomLocationResourceSyncRule_UpdateViaIdentityExpanded';
            UpdateViaJsonFilePath = 'Az.CustomLocation.private\Update-AzCustomLocationResourceSyncRule_UpdateViaJsonFilePath';
            UpdateViaJsonString = 'Az.CustomLocation.private\Update-AzCustomLocationResourceSyncRule_UpdateViaJsonString';
        }
        if (('UpdateExpanded', 'UpdateViaJsonFilePath', 'UpdateViaJsonString') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Update a Custom Location in the specified Subscription and Resource Group
.Description
Update a Custom Location in the specified Subscription and Resource Group
.Example
$HostResourceId = (Get-AzConnectedKubernetes -ClusterName azps-connect -ResourceGroupName azps_test_cluster).Id
$ClusterExtensionId = (Get-AzKubernetesExtension -ClusterName azps-connect -ClusterType ConnectedClusters -ResourceGroupName azps_test_cluster -Name azps-extension).Id
Update-AzCustomLocation -ResourceGroupName azps_test_cluster -Name azps-customlocation -ClusterExtensionId $ClusterExtensionId -HostResourceId $HostResourceId -Namespace azps-namespace -Tag @{"Key1"="Value1"}
.Example
$obj = Get-AzCustomLocation -ResourceGroupName azps_test_cluster -Name azps-customlocation
Update-AzCustomLocation -InputObject $obj -Tag @{"Key1"="Value1"}
.Example
Update-AzCustomLocation -Name azps-customlocation -ResourceGroupName group01 -EnableSystemAssignedIdentity $false -Tag @{"aaa"= "111"}
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocation
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <ICustomLocationIdentity>: Identity Parameter
  [ChildResourceName <String>]: Resource Sync Rule name.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ResourceName <String>]: Custom Locations name.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.customlocation/update-azcustomlocation
#>
function Update-AzCustomLocation {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocation])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # Custom Locations name.
    ${Name},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ICustomLocationIdentity]
    # Identity Parameter
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # The type of the Custom Locations authentication
    ${AuthenticationType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # The kubeconfig value.
    ${AuthenticationValue},

    [Parameter()]
    [AllowEmptyCollection()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String[]]
    # Contains the reference to the add-on that contains charts to deploy CRDs and operators.
    ${ClusterExtensionId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Display name for the Custom Locations location.
    ${DisplayName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.Nullable[System.Boolean]]
    # Decides if enable a system assigned identity for the resource.
    ${EnableSystemAssignedIdentity},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Connected Cluster or AKS Cluster.
    # The Custom Locations RP will perform a checkAccess API for listAdminCredentials permissions.
    ${HostResourceId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Kubernetes namespace that will be created on the specified cluster.
    ${Namespace},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            UpdateExpanded = 'Az.CustomLocation.private\Update-AzCustomLocation_UpdateExpanded';
            UpdateViaIdentityExpanded = 'Az.CustomLocation.private\Update-AzCustomLocation_UpdateViaIdentityExpanded';
        }
        if (('UpdateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId') ) {
            $testPlayback = $false
            $PSBoundParameters['HttpPipelinePrepend'] | Foreach-Object { if ($_) { $testPlayback = $testPlayback -or ('Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.PipelineMock' -eq $_.Target.GetType().FullName -and 'Playback' -eq $_.Target.Mode) } }
            if ($testPlayback) {
                $PSBoundParameters['SubscriptionId'] = . (Join-Path $PSScriptRoot '..' 'utils' 'Get-SubscriptionIdTestSafe.ps1')
            } else {
                $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
            }
        }
        if (('UpdateExpanded', 'UpdateViaIdentityExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('HostType') ) {
            $PSBoundParameters['HostType'] = "Kubernetes"
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Create an in-memory object for MatchExpressionsProperties.
.Description
Create an in-memory object for MatchExpressionsProperties.
.Example
New-AzCustomLocationMatchExpressionsObject -Key "key4" -Operator "In" -Value "value4"
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.MatchExpressionsProperties
.Link
https://learn.microsoft.com/powershell/module/Az.CustomLocation/new-azcustomlocationmatchexpressionsobject
#>
function New-AzCustomLocationMatchExpressionsObject {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Models.MatchExpressionsProperties])]
[CmdletBinding(PositionalBinding=$false)]
param(
    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # Key is the label key that the selector applies to.
    ${Key},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String]
    # The Operator field represents a key's relationship to a set of values.
    # Valid operators are In, NotIn, Exists and DoesNotExist.
    ${Operator},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Category('Body')]
    [System.String[]]
    # The label value.
    ${Value}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            __AllParameterSets = 'Az.CustomLocation.custom\New-AzCustomLocationMatchExpressionsObject';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.CustomLocation.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

# SIG # Begin signature block
# MIIoKgYJKoZIhvcNAQcCoIIoGzCCKBcCAQExDzANBglghkgBZQMEAgEFADB5Bgor
# BgEEAYI3AgEEoGswaTA0BgorBgEEAYI3AgEeMCYCAwEAAAQQH8w7YFlLCE63JNLG
# KX7zUQIBAAIBAAIBAAIBAAIBADAxMA0GCWCGSAFlAwQCAQUABCDL78nqHMy/zmIC
# SH1BLinWLConz6rYBjMG575Xze89e6CCDXYwggX0MIID3KADAgECAhMzAAADrzBA
# DkyjTQVBAAAAAAOvMA0GCSqGSIb3DQEBCwUAMH4xCzAJBgNVBAYTAlVTMRMwEQYD
# VQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVNaWNy
# b3NvZnQgQ29ycG9yYXRpb24xKDAmBgNVBAMTH01pY3Jvc29mdCBDb2RlIFNpZ25p
# bmcgUENBIDIwMTEwHhcNMjMxMTE2MTkwOTAwWhcNMjQxMTE0MTkwOTAwWjB0MQsw
# CQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9u
# ZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMR4wHAYDVQQDExVNaWNy
# b3NvZnQgQ29ycG9yYXRpb24wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIB
# AQDOS8s1ra6f0YGtg0OhEaQa/t3Q+q1MEHhWJhqQVuO5amYXQpy8MDPNoJYk+FWA
# hePP5LxwcSge5aen+f5Q6WNPd6EDxGzotvVpNi5ve0H97S3F7C/axDfKxyNh21MG
# 0W8Sb0vxi/vorcLHOL9i+t2D6yvvDzLlEefUCbQV/zGCBjXGlYJcUj6RAzXyeNAN
# xSpKXAGd7Fh+ocGHPPphcD9LQTOJgG7Y7aYztHqBLJiQQ4eAgZNU4ac6+8LnEGAL
# go1ydC5BJEuJQjYKbNTy959HrKSu7LO3Ws0w8jw6pYdC1IMpdTkk2puTgY2PDNzB
# tLM4evG7FYer3WX+8t1UMYNTAgMBAAGjggFzMIIBbzAfBgNVHSUEGDAWBgorBgEE
# AYI3TAgBBggrBgEFBQcDAzAdBgNVHQ4EFgQURxxxNPIEPGSO8kqz+bgCAQWGXsEw
# RQYDVR0RBD4wPKQ6MDgxHjAcBgNVBAsTFU1pY3Jvc29mdCBDb3Jwb3JhdGlvbjEW
# MBQGA1UEBRMNMjMwMDEyKzUwMTgyNjAfBgNVHSMEGDAWgBRIbmTlUAXTgqoXNzci
# tW2oynUClTBUBgNVHR8ETTBLMEmgR6BFhkNodHRwOi8vd3d3Lm1pY3Jvc29mdC5j
# b20vcGtpb3BzL2NybC9NaWNDb2RTaWdQQ0EyMDExXzIwMTEtMDctMDguY3JsMGEG
# CCsGAQUFBwEBBFUwUzBRBggrBgEFBQcwAoZFaHR0cDovL3d3dy5taWNyb3NvZnQu
# Y29tL3BraW9wcy9jZXJ0cy9NaWNDb2RTaWdQQ0EyMDExXzIwMTEtMDctMDguY3J0
# MAwGA1UdEwEB/wQCMAAwDQYJKoZIhvcNAQELBQADggIBAISxFt/zR2frTFPB45Yd
# mhZpB2nNJoOoi+qlgcTlnO4QwlYN1w/vYwbDy/oFJolD5r6FMJd0RGcgEM8q9TgQ
# 2OC7gQEmhweVJ7yuKJlQBH7P7Pg5RiqgV3cSonJ+OM4kFHbP3gPLiyzssSQdRuPY
# 1mIWoGg9i7Y4ZC8ST7WhpSyc0pns2XsUe1XsIjaUcGu7zd7gg97eCUiLRdVklPmp
# XobH9CEAWakRUGNICYN2AgjhRTC4j3KJfqMkU04R6Toyh4/Toswm1uoDcGr5laYn
# TfcX3u5WnJqJLhuPe8Uj9kGAOcyo0O1mNwDa+LhFEzB6CB32+wfJMumfr6degvLT
# e8x55urQLeTjimBQgS49BSUkhFN7ois3cZyNpnrMca5AZaC7pLI72vuqSsSlLalG
# OcZmPHZGYJqZ0BacN274OZ80Q8B11iNokns9Od348bMb5Z4fihxaBWebl8kWEi2O
# PvQImOAeq3nt7UWJBzJYLAGEpfasaA3ZQgIcEXdD+uwo6ymMzDY6UamFOfYqYWXk
# ntxDGu7ngD2ugKUuccYKJJRiiz+LAUcj90BVcSHRLQop9N8zoALr/1sJuwPrVAtx
# HNEgSW+AKBqIxYWM4Ev32l6agSUAezLMbq5f3d8x9qzT031jMDT+sUAoCw0M5wVt
# CUQcqINPuYjbS1WgJyZIiEkBMIIHejCCBWKgAwIBAgIKYQ6Q0gAAAAAAAzANBgkq
# hkiG9w0BAQsFADCBiDELMAkGA1UEBhMCVVMxEzARBgNVBAgTCldhc2hpbmd0b24x
# EDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jvc29mdCBDb3Jwb3JhdGlv
# bjEyMDAGA1UEAxMpTWljcm9zb2Z0IFJvb3QgQ2VydGlmaWNhdGUgQXV0aG9yaXR5
# IDIwMTEwHhcNMTEwNzA4MjA1OTA5WhcNMjYwNzA4MjEwOTA5WjB+MQswCQYDVQQG
# EwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwG
# A1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSgwJgYDVQQDEx9NaWNyb3NvZnQg
# Q29kZSBTaWduaW5nIFBDQSAyMDExMIICIjANBgkqhkiG9w0BAQEFAAOCAg8AMIIC
# CgKCAgEAq/D6chAcLq3YbqqCEE00uvK2WCGfQhsqa+laUKq4BjgaBEm6f8MMHt03
# a8YS2AvwOMKZBrDIOdUBFDFC04kNeWSHfpRgJGyvnkmc6Whe0t+bU7IKLMOv2akr
# rnoJr9eWWcpgGgXpZnboMlImEi/nqwhQz7NEt13YxC4Ddato88tt8zpcoRb0Rrrg
# OGSsbmQ1eKagYw8t00CT+OPeBw3VXHmlSSnnDb6gE3e+lD3v++MrWhAfTVYoonpy
# 4BI6t0le2O3tQ5GD2Xuye4Yb2T6xjF3oiU+EGvKhL1nkkDstrjNYxbc+/jLTswM9
# sbKvkjh+0p2ALPVOVpEhNSXDOW5kf1O6nA+tGSOEy/S6A4aN91/w0FK/jJSHvMAh
# dCVfGCi2zCcoOCWYOUo2z3yxkq4cI6epZuxhH2rhKEmdX4jiJV3TIUs+UsS1Vz8k
# A/DRelsv1SPjcF0PUUZ3s/gA4bysAoJf28AVs70b1FVL5zmhD+kjSbwYuER8ReTB
# w3J64HLnJN+/RpnF78IcV9uDjexNSTCnq47f7Fufr/zdsGbiwZeBe+3W7UvnSSmn
# Eyimp31ngOaKYnhfsi+E11ecXL93KCjx7W3DKI8sj0A3T8HhhUSJxAlMxdSlQy90
# lfdu+HggWCwTXWCVmj5PM4TasIgX3p5O9JawvEagbJjS4NaIjAsCAwEAAaOCAe0w
# ggHpMBAGCSsGAQQBgjcVAQQDAgEAMB0GA1UdDgQWBBRIbmTlUAXTgqoXNzcitW2o
# ynUClTAZBgkrBgEEAYI3FAIEDB4KAFMAdQBiAEMAQTALBgNVHQ8EBAMCAYYwDwYD
# VR0TAQH/BAUwAwEB/zAfBgNVHSMEGDAWgBRyLToCMZBDuRQFTuHqp8cx0SOJNDBa
# BgNVHR8EUzBRME+gTaBLhklodHRwOi8vY3JsLm1pY3Jvc29mdC5jb20vcGtpL2Ny
# bC9wcm9kdWN0cy9NaWNSb29DZXJBdXQyMDExXzIwMTFfMDNfMjIuY3JsMF4GCCsG
# AQUFBwEBBFIwUDBOBggrBgEFBQcwAoZCaHR0cDovL3d3dy5taWNyb3NvZnQuY29t
# L3BraS9jZXJ0cy9NaWNSb29DZXJBdXQyMDExXzIwMTFfMDNfMjIuY3J0MIGfBgNV
# HSAEgZcwgZQwgZEGCSsGAQQBgjcuAzCBgzA/BggrBgEFBQcCARYzaHR0cDovL3d3
# dy5taWNyb3NvZnQuY29tL3BraW9wcy9kb2NzL3ByaW1hcnljcHMuaHRtMEAGCCsG
# AQUFBwICMDQeMiAdAEwAZQBnAGEAbABfAHAAbwBsAGkAYwB5AF8AcwB0AGEAdABl
# AG0AZQBuAHQALiAdMA0GCSqGSIb3DQEBCwUAA4ICAQBn8oalmOBUeRou09h0ZyKb
# C5YR4WOSmUKWfdJ5DJDBZV8uLD74w3LRbYP+vj/oCso7v0epo/Np22O/IjWll11l
# hJB9i0ZQVdgMknzSGksc8zxCi1LQsP1r4z4HLimb5j0bpdS1HXeUOeLpZMlEPXh6
# I/MTfaaQdION9MsmAkYqwooQu6SpBQyb7Wj6aC6VoCo/KmtYSWMfCWluWpiW5IP0
# wI/zRive/DvQvTXvbiWu5a8n7dDd8w6vmSiXmE0OPQvyCInWH8MyGOLwxS3OW560
# STkKxgrCxq2u5bLZ2xWIUUVYODJxJxp/sfQn+N4sOiBpmLJZiWhub6e3dMNABQam
# ASooPoI/E01mC8CzTfXhj38cbxV9Rad25UAqZaPDXVJihsMdYzaXht/a8/jyFqGa
# J+HNpZfQ7l1jQeNbB5yHPgZ3BtEGsXUfFL5hYbXw3MYbBL7fQccOKO7eZS/sl/ah
# XJbYANahRr1Z85elCUtIEJmAH9AAKcWxm6U/RXceNcbSoqKfenoi+kiVH6v7RyOA
# 9Z74v2u3S5fi63V4GuzqN5l5GEv/1rMjaHXmr/r8i+sLgOppO6/8MO0ETI7f33Vt
# Y5E90Z1WTk+/gFcioXgRMiF670EKsT/7qMykXcGhiJtXcVZOSEXAQsmbdlsKgEhr
# /Xmfwb1tbWrJUnMTDXpQzTGCGgowghoGAgEBMIGVMH4xCzAJBgNVBAYTAlVTMRMw
# EQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVN
# aWNyb3NvZnQgQ29ycG9yYXRpb24xKDAmBgNVBAMTH01pY3Jvc29mdCBDb2RlIFNp
# Z25pbmcgUENBIDIwMTECEzMAAAOvMEAOTKNNBUEAAAAAA68wDQYJYIZIAWUDBAIB
# BQCgga4wGQYJKoZIhvcNAQkDMQwGCisGAQQBgjcCAQQwHAYKKwYBBAGCNwIBCzEO
# MAwGCisGAQQBgjcCARUwLwYJKoZIhvcNAQkEMSIEIFS3jxOXa4UmIf9964ELQcpk
# UEKPn/JRgKba4KStHsELMEIGCisGAQQBgjcCAQwxNDAyoBSAEgBNAGkAYwByAG8A
# cwBvAGYAdKEagBhodHRwOi8vd3d3Lm1pY3Jvc29mdC5jb20wDQYJKoZIhvcNAQEB
# BQAEggEArx/Q+CBMDOGbZ1E/Mx1uV1RD+B0+rwDqkME6shqBIewG7lzGyPXj76bx
# y7ZeaZXNGCUaooZpHkio7PUD0+zy4FadfP5uthQL99mR/QJQdd47UhID5v0xdxQH
# oj5hTN1H6D1Snt9z3gttzAvZeQoIqVlBMw/KtkQi40c5NRXFc6v/E5jUMLb5KHER
# 15shuKZd7+8bfSOaEFyOsH92C2xcmNdid1sCstJhYPPbzygVrVDT6RFd7cOd+rNV
# SOteIv6+yIxIGs2eIeSRU6IuXCW/40RfOcs98Aozq65G+csexPcxlBOLPJRRFMQD
# OtnGHELj4o69vnA873of7DQ86A/T7aGCF5QwgheQBgorBgEEAYI3AwMBMYIXgDCC
# F3wGCSqGSIb3DQEHAqCCF20wghdpAgEDMQ8wDQYJYIZIAWUDBAIBBQAwggFSBgsq
# hkiG9w0BCRABBKCCAUEEggE9MIIBOQIBAQYKKwYBBAGEWQoDATAxMA0GCWCGSAFl
# AwQCAQUABCAg5uxCnO6wv0g4KKJpWnjBnOQmCWbUt8oR29s5rBWTuAIGZjK/djfg
# GBMyMDI0MDUxNjA2NDIxMy41NTFaMASAAgH0oIHRpIHOMIHLMQswCQYDVQQGEwJV
# UzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UE
# ChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSUwIwYDVQQLExxNaWNyb3NvZnQgQW1l
# cmljYSBPcGVyYXRpb25zMScwJQYDVQQLEx5uU2hpZWxkIFRTUyBFU046OTIwMC0w
# NUUwLUQ5NDcxJTAjBgNVBAMTHE1pY3Jvc29mdCBUaW1lLVN0YW1wIFNlcnZpY2Wg
# ghHqMIIHIDCCBQigAwIBAgITMwAAAecujy+TC08b6QABAAAB5zANBgkqhkiG9w0B
# AQsFADB8MQswCQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UE
# BxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSYwJAYD
# VQQDEx1NaWNyb3NvZnQgVGltZS1TdGFtcCBQQ0EgMjAxMDAeFw0yMzEyMDYxODQ1
# MTlaFw0yNTAzMDUxODQ1MTlaMIHLMQswCQYDVQQGEwJVUzETMBEGA1UECBMKV2Fz
# aGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0IENv
# cnBvcmF0aW9uMSUwIwYDVQQLExxNaWNyb3NvZnQgQW1lcmljYSBPcGVyYXRpb25z
# MScwJQYDVQQLEx5uU2hpZWxkIFRTUyBFU046OTIwMC0wNUUwLUQ5NDcxJTAjBgNV
# BAMTHE1pY3Jvc29mdCBUaW1lLVN0YW1wIFNlcnZpY2UwggIiMA0GCSqGSIb3DQEB
# AQUAA4ICDwAwggIKAoICAQDCV58v4IuQ659XPM1DtaWMv9/HRUC5kdiEF89YBP6/
# Rn7kjqMkZ5ESemf5Eli4CLtQVSefRpF1j7S5LLKisMWOGRaLcaVbGTfcmI1vMRJ1
# tzMwCNIoCq/vy8WH8QdV1B/Ab5sK+Q9yIvzGw47TfXPE8RlrauwK/e+nWnwMt060
# akEZiJJz1Vh1LhSYKaiP9Z23EZmGETCWigkKbcuAnhvh3yrMa89uBfaeHQZEHGQq
# dskM48EBcWSWdpiSSBiAxyhHUkbknl9PPztB/SUxzRZjUzWHg9bf1mqZ0cIiAWC0
# EjK7ONhlQfKSRHVLKLNPpl3/+UL4Xjc0Yvdqc88gOLUr/84T9/xK5r82ulvRp2A8
# /ar9cG4W7650uKaAxRAmgL4hKgIX5/0aIAsbyqJOa6OIGSF9a+DfXl1LpQPNKR79
# 2scF7tjD5WqwIuifS9YUiHMvRLjjKk0SSCV/mpXC0BoPkk5asfxrrJbCsJePHSOE
# blpJzRmzaP6OMXwRcrb7TXFQOsTkKuqkWvvYIPvVzC68UM+MskLPld1eqdOOMK7S
# bbf2tGSZf3+iOwWQMcWXB9gw5gK3AIYK08WkJJuyzPqfitgubdRCmYr9CVsNOuW+
# wHDYGhciJDF2LkrjkFUjUcXSIJd9f2ssYitZ9CurGV74BQcfrxjvk1L8jvtN7mul
# IwIDAQABo4IBSTCCAUUwHQYDVR0OBBYEFM/+4JiAnzY4dpEf/Zlrh1K73o9YMB8G
# A1UdIwQYMBaAFJ+nFV0AXmJdg/Tl0mWnG1M1GelyMF8GA1UdHwRYMFYwVKBSoFCG
# Tmh0dHA6Ly93d3cubWljcm9zb2Z0LmNvbS9wa2lvcHMvY3JsL01pY3Jvc29mdCUy
# MFRpbWUtU3RhbXAlMjBQQ0ElMjAyMDEwKDEpLmNybDBsBggrBgEFBQcBAQRgMF4w
# XAYIKwYBBQUHMAKGUGh0dHA6Ly93d3cubWljcm9zb2Z0LmNvbS9wa2lvcHMvY2Vy
# dHMvTWljcm9zb2Z0JTIwVGltZS1TdGFtcCUyMFBDQSUyMDIwMTAoMSkuY3J0MAwG
# A1UdEwEB/wQCMAAwFgYDVR0lAQH/BAwwCgYIKwYBBQUHAwgwDgYDVR0PAQH/BAQD
# AgeAMA0GCSqGSIb3DQEBCwUAA4ICAQB0ofDbk+llWi1cC6nsfie5Jtp09o6b6ARC
# pvtDPq2KFP+hi+UNNP7LGciKuckqXCmBTFIhfBeGSxvk6ycokdQr3815pEOaYWTn
# HvQ0+8hKy86r1F4rfBu4oHB5cTy08T4ohrG/OYG/B/gNnz0Ol6v7u/qEjz48zXZ6
# ZlxKGyZwKmKZWaBd2DYEwzKpdLkBxs6A6enWZR0jY+q5FdbV45ghGTKgSr5ECAOn
# LD4njJwfjIq0mRZWwDZQoXtJSaVHSu2lHQL3YHEFikunbUTJfNfBDLL7Gv+sTmRi
# DZky5OAxoLG2gaTfuiFbfpmSfPcgl5COUzfMQnzpKfX6+FkI0QQNvuPpWsDU8sR+
# uni2VmDo7rmqJrom4ihgVNdLaMfNUqvBL5ZiSK1zmaELBJ9a+YOjE5pmSarW5sGb
# n7iVkF2W9JQIOH6tGWLFJS5Hs36zahkoHh8iD963LeGjZqkFusKaUW72yMj/yxTe
# GEDOoIr35kwXxr1Uu+zkur2y+FuNY0oZjppzp95AW1lehP0xaO+oBV1XfvaCur/B
# 5PVAp2xzrosMEUcAwpJpio+VYfIufGj7meXcGQYWA8Umr8K6Auo+Jlj8IeFS6lSv
# KhqQpmdBzAMGqPOQKt1Ow3ZXxehK7vAiim3ZiALlM0K546k0sZrxdZPgpmz7O8w9
# gHLuyZAQezCCB3EwggVZoAMCAQICEzMAAAAVxedrngKbSZkAAAAAABUwDQYJKoZI
# hvcNAQELBQAwgYgxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAw
# DgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVNaWNyb3NvZnQgQ29ycG9yYXRpb24x
# MjAwBgNVBAMTKU1pY3Jvc29mdCBSb290IENlcnRpZmljYXRlIEF1dGhvcml0eSAy
# MDEwMB4XDTIxMDkzMDE4MjIyNVoXDTMwMDkzMDE4MzIyNVowfDELMAkGA1UEBhMC
# VVMxEzARBgNVBAgTCldhc2hpbmd0b24xEDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNV
# BAoTFU1pY3Jvc29mdCBDb3Jwb3JhdGlvbjEmMCQGA1UEAxMdTWljcm9zb2Z0IFRp
# bWUtU3RhbXAgUENBIDIwMTAwggIiMA0GCSqGSIb3DQEBAQUAA4ICDwAwggIKAoIC
# AQDk4aZM57RyIQt5osvXJHm9DtWC0/3unAcH0qlsTnXIyjVX9gF/bErg4r25Phdg
# M/9cT8dm95VTcVrifkpa/rg2Z4VGIwy1jRPPdzLAEBjoYH1qUoNEt6aORmsHFPPF
# dvWGUNzBRMhxXFExN6AKOG6N7dcP2CZTfDlhAnrEqv1yaa8dq6z2Nr41JmTamDu6
# GnszrYBbfowQHJ1S/rboYiXcag/PXfT+jlPP1uyFVk3v3byNpOORj7I5LFGc6XBp
# Dco2LXCOMcg1KL3jtIckw+DJj361VI/c+gVVmG1oO5pGve2krnopN6zL64NF50Zu
# yjLVwIYwXE8s4mKyzbnijYjklqwBSru+cakXW2dg3viSkR4dPf0gz3N9QZpGdc3E
# XzTdEonW/aUgfX782Z5F37ZyL9t9X4C626p+Nuw2TPYrbqgSUei/BQOj0XOmTTd0
# lBw0gg/wEPK3Rxjtp+iZfD9M269ewvPV2HM9Q07BMzlMjgK8QmguEOqEUUbi0b1q
# GFphAXPKZ6Je1yh2AuIzGHLXpyDwwvoSCtdjbwzJNmSLW6CmgyFdXzB0kZSU2LlQ
# +QuJYfM2BjUYhEfb3BvR/bLUHMVr9lxSUV0S2yW6r1AFemzFER1y7435UsSFF5PA
# PBXbGjfHCBUYP3irRbb1Hode2o+eFnJpxq57t7c+auIurQIDAQABo4IB3TCCAdkw
# EgYJKwYBBAGCNxUBBAUCAwEAATAjBgkrBgEEAYI3FQIEFgQUKqdS/mTEmr6CkTxG
# NSnPEP8vBO4wHQYDVR0OBBYEFJ+nFV0AXmJdg/Tl0mWnG1M1GelyMFwGA1UdIARV
# MFMwUQYMKwYBBAGCN0yDfQEBMEEwPwYIKwYBBQUHAgEWM2h0dHA6Ly93d3cubWlj
# cm9zb2Z0LmNvbS9wa2lvcHMvRG9jcy9SZXBvc2l0b3J5Lmh0bTATBgNVHSUEDDAK
# BggrBgEFBQcDCDAZBgkrBgEEAYI3FAIEDB4KAFMAdQBiAEMAQTALBgNVHQ8EBAMC
# AYYwDwYDVR0TAQH/BAUwAwEB/zAfBgNVHSMEGDAWgBTV9lbLj+iiXGJo0T2UkFvX
# zpoYxDBWBgNVHR8ETzBNMEugSaBHhkVodHRwOi8vY3JsLm1pY3Jvc29mdC5jb20v
# cGtpL2NybC9wcm9kdWN0cy9NaWNSb29DZXJBdXRfMjAxMC0wNi0yMy5jcmwwWgYI
# KwYBBQUHAQEETjBMMEoGCCsGAQUFBzAChj5odHRwOi8vd3d3Lm1pY3Jvc29mdC5j
# b20vcGtpL2NlcnRzL01pY1Jvb0NlckF1dF8yMDEwLTA2LTIzLmNydDANBgkqhkiG
# 9w0BAQsFAAOCAgEAnVV9/Cqt4SwfZwExJFvhnnJL/Klv6lwUtj5OR2R4sQaTlz0x
# M7U518JxNj/aZGx80HU5bbsPMeTCj/ts0aGUGCLu6WZnOlNN3Zi6th542DYunKmC
# VgADsAW+iehp4LoJ7nvfam++Kctu2D9IdQHZGN5tggz1bSNU5HhTdSRXud2f8449
# xvNo32X2pFaq95W2KFUn0CS9QKC/GbYSEhFdPSfgQJY4rPf5KYnDvBewVIVCs/wM
# nosZiefwC2qBwoEZQhlSdYo2wh3DYXMuLGt7bj8sCXgU6ZGyqVvfSaN0DLzskYDS
# PeZKPmY7T7uG+jIa2Zb0j/aRAfbOxnT99kxybxCrdTDFNLB62FD+CljdQDzHVG2d
# Y3RILLFORy3BFARxv2T5JL5zbcqOCb2zAVdJVGTZc9d/HltEAY5aGZFrDZ+kKNxn
# GSgkujhLmm77IVRrakURR6nxt67I6IleT53S0Ex2tVdUCbFpAUR+fKFhbHP+Crvs
# QWY9af3LwUFJfn6Tvsv4O+S3Fb+0zj6lMVGEvL8CwYKiexcdFYmNcP7ntdAoGokL
# jzbaukz5m/8K6TT4JDVnK+ANuOaMmdbhIurwJ0I9JZTmdHRbatGePu1+oDEzfbzL
# 6Xu/OHBE0ZDxyKs6ijoIYn/ZcGNTTY3ugm2lBRDBcQZqELQdVTNYs6FwZvKhggNN
# MIICNQIBATCB+aGB0aSBzjCByzELMAkGA1UEBhMCVVMxEzARBgNVBAgTCldhc2hp
# bmd0b24xEDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jvc29mdCBDb3Jw
# b3JhdGlvbjElMCMGA1UECxMcTWljcm9zb2Z0IEFtZXJpY2EgT3BlcmF0aW9uczEn
# MCUGA1UECxMeblNoaWVsZCBUU1MgRVNOOjkyMDAtMDVFMC1EOTQ3MSUwIwYDVQQD
# ExxNaWNyb3NvZnQgVGltZS1TdGFtcCBTZXJ2aWNloiMKAQEwBwYFKw4DAhoDFQCz
# cgTnGasSwe/dru+cPe1NF/vwQ6CBgzCBgKR+MHwxCzAJBgNVBAYTAlVTMRMwEQYD
# VQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVNaWNy
# b3NvZnQgQ29ycG9yYXRpb24xJjAkBgNVBAMTHU1pY3Jvc29mdCBUaW1lLVN0YW1w
# IFBDQSAyMDEwMA0GCSqGSIb3DQEBCwUAAgUA6e+yFzAiGA8yMDI0MDUxNTIyMTM0
# M1oYDzIwMjQwNTE2MjIxMzQzWjB0MDoGCisGAQQBhFkKBAExLDAqMAoCBQDp77IX
# AgEAMAcCAQACAhGgMAcCAQACAhOEMAoCBQDp8QOXAgEAMDYGCisGAQQBhFkKBAIx
# KDAmMAwGCisGAQQBhFkKAwKgCjAIAgEAAgMHoSChCjAIAgEAAgMBhqAwDQYJKoZI
# hvcNAQELBQADggEBAF44a9QWeg+Id3E41o5OjaE8ULcI8vkJsSmXGxbc8sOzU9n7
# UL8M6RXvpAkdZayoysJAjFrjUwJaXba+hM5cgAaRSvoWu84aQwo6rOwIEY0PZuYc
# VvHj0tlXVKEg+or8ccIHarYCY6ff/V3LcPNFbZWa8KwDyq+/nhjNVW7hF95PNLJh
# WgxK+Lw5738SOaD9mi44E5a4jFa7asoJXMbPvdOKqa5NdIZLHGoIBVacxjW+qUIw
# lyys3Q31KOSOjKr26BOnAvKBZBP9xkGvhDu+AY/eUgl0MqOCp6+gq1yvArDj/S+9
# 4D263+l8WNjPIYI8NCRnrn1eT4CafQCe5vXnhDMxggQNMIIECQIBATCBkzB8MQsw
# CQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9u
# ZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSYwJAYDVQQDEx1NaWNy
# b3NvZnQgVGltZS1TdGFtcCBQQ0EgMjAxMAITMwAAAecujy+TC08b6QABAAAB5zAN
# BglghkgBZQMEAgEFAKCCAUowGgYJKoZIhvcNAQkDMQ0GCyqGSIb3DQEJEAEEMC8G
# CSqGSIb3DQEJBDEiBCA1i2zFUcr5SHFH/ovsKRWs4XxIylhaYIR1R2b6P2MTRDCB
# +gYLKoZIhvcNAQkQAi8xgeowgecwgeQwgb0EIOU2XQ12aob9DeDFXM9UFHeEX74F
# v0ABvQMG7qC51nOtMIGYMIGApH4wfDELMAkGA1UEBhMCVVMxEzARBgNVBAgTCldh
# c2hpbmd0b24xEDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jvc29mdCBD
# b3Jwb3JhdGlvbjEmMCQGA1UEAxMdTWljcm9zb2Z0IFRpbWUtU3RhbXAgUENBIDIw
# MTACEzMAAAHnLo8vkwtPG+kAAQAAAecwIgQgAGwI1c5zsnT9VKpcsRCD4yUbFLrv
# 5RCjtdMGM/z1PFswDQYJKoZIhvcNAQELBQAEggIAKHEdEwjJRmoESSzo//rIw+os
# EchG8YwTB3JMbK30i0pQEEgFRI9PgqUDcgi9WECXiTVrwTFTZCq967zMMS/33CFh
# wSc4ExXs59k82KVZGkHpL8VYerjiyevwfu22wt4TG5en7gJjf7MDRq/tEiEl7Lz7
# 1KL1vFzX0dYgfcjPNLT541uVeRNvct05zMDjQypX+Y0Tq3X/PNvqmBJlUi5Eyalb
# 9hRfAvHMz9+7ovBGd3WG/ekCdyYzd/RqKvCYY4y3ztW3ORGEsvVRRDkdV2VDvckJ
# I3QTIo9L3wasMKB607qcnIpvzuY1zjWqE0f2H0x+GBGldGK/POdy6lofUPB1ZPm4
# QT7sZHNVsFCprPCRDs7/6SAvRoNuOYaXJxQetS0jg3RMFQtQ0wpkC7pKhdWnyTDk
# 7f7syiGF/UvRl1F1emyU2hGav3AtiZBYbb0+0fP9MD0xvjKVXFP9QNbRMRtusG3E
# J7A2B/pFkO2aAoYlLodVr0uLqF0LFQ+wDX7rumS+n3XA5LMsFu9rfbF8gb9sQrmE
# dI6K2jJAV12+nY5ThJLUu7lqEzxJtq8KyhZKpjyURMsHIh4ZtQx4gfUyu8xkEKPt
# 96vCLaWvERx0cPnz1f1e+97Fuu5ytcYplY9NUHZjXceJgvfLPNBIXyCHZjmjetvC
# W37wFUiPBv/rHspx8+U=
# SIG # End signature block