DevCenter.AutoRest/internal/ProxyCmdletDefinitions.ps1


# ----------------------------------------------------------------------------------
# Copyright (c) Microsoft Corporation. All rights reserved.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Code generated by Microsoft (R) AutoRest Code Generator.Changes may cause incorrect behavior and will be lost if the code
# is regenerated.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Connects a catalog to enable syncing.
.Description
Connects a catalog to enable syncing.
.Example
{{ Add code here }}
.Example
{{ Add code here }}
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/connect-azdevcenteradmincatalog
#>

function Connect-AzDevCenterAdminCatalog {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Connect', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Connect', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='Connect', Mandatory)]
    [Alias('CatalogName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Catalog.
    ${Name},

    [Parameter(ParameterSetName='Connect', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Connect')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='ConnectViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            Connect = 'Az.DevCenter.private\Connect-AzDevCenterAdminCatalog_Connect';
            ConnectViaIdentity = 'Az.DevCenter.private\Connect-AzDevCenterAdminCatalog_ConnectViaIdentity';
        }
        if (('Connect') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Gets Catalog Devbox Definition error details
.Description
Gets Catalog Devbox Definition error details
.Example
{{ Add code here }}
.Example
{{ Add code here }}
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ICatalogErrorDetails
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/get-azdevcenteradmincatalogdevboxdefinitionerrordetail
#>

function Get-AzDevCenterAdminCatalogDevBoxDefinitionErrorDetail {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ICatalogErrorDetails])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Catalog.
    ${CatalogName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Dev Box definition.
    ${DevBoxDefinitionName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            Get = 'Az.DevCenter.private\Get-AzDevCenterAdminCatalogDevBoxDefinitionErrorDetail_Get';
            GetViaIdentity = 'Az.DevCenter.private\Get-AzDevCenterAdminCatalogDevBoxDefinitionErrorDetail_GetViaIdentity';
        }
        if (('Get') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Gets a Dev Box definition from the catalog
.Description
Gets a Dev Box definition from the catalog
.Example
{{ Add code here }}
.Example
{{ Add code here }}
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IDevBoxDefinition
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/get-azdevcenteradmincatalogdevboxdefinition
#>

function Get-AzDevCenterAdminCatalogDevBoxDefinition {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IDevBoxDefinition])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Catalog.
    ${CatalogName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Dev Box definition.
    ${DevBoxDefinitionName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            Get = 'Az.DevCenter.private\Get-AzDevCenterAdminCatalogDevBoxDefinition_Get';
            GetViaIdentity = 'Az.DevCenter.private\Get-AzDevCenterAdminCatalogDevBoxDefinition_GetViaIdentity';
            List = 'Az.DevCenter.private\Get-AzDevCenterAdminCatalogDevBoxDefinition_List';
        }
        if (('Get', 'List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Gets Customization Task error details
.Description
Gets Customization Task error details
.Example
{{ Add code here }}
.Example
{{ Add code here }}
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ICatalogErrorDetails
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/get-azdevcenteradmincustomizationtaskerrordetail
#>

function Get-AzDevCenterAdminCustomizationTaskErrorDetail {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ICatalogErrorDetails])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Catalog.
    ${CatalogName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Task.
    ${TaskName},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            Get = 'Az.DevCenter.private\Get-AzDevCenterAdminCustomizationTaskErrorDetail_Get';
            GetViaIdentity = 'Az.DevCenter.private\Get-AzDevCenterAdminCustomizationTaskErrorDetail_GetViaIdentity';
        }
        if (('Get') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Gets a Task from the catalog
.Description
Gets a Task from the catalog
.Example
{{ Add code here }}
.Example
{{ Add code here }}
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ICustomizationTask
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/get-azdevcenteradmincustomizationtask
#>

function Get-AzDevCenterAdminCustomizationTask {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ICustomizationTask])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Catalog.
    ${CatalogName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Task.
    ${TaskName},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            Get = 'Az.DevCenter.private\Get-AzDevCenterAdminCustomizationTask_Get';
            GetViaIdentity = 'Az.DevCenter.private\Get-AzDevCenterAdminCustomizationTask_GetViaIdentity';
            List = 'Az.DevCenter.private\Get-AzDevCenterAdminCustomizationTask_List';
        }
        if (('Get', 'List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Lists all of the available resource provider operations.
.Description
Lists all of the available resource provider operations.
.Example
{{ Add code here }}
.Example
{{ Add code here }}
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api30.IOperation
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/get-azdevcenteradminoperation
#>

function Get-AzDevCenterAdminOperation {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api30.IOperation])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            List = 'Az.DevCenter.private\Get-AzDevCenterAdminOperation_List';
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Gets a schedule resource.
.Description
Gets a schedule resource.
.Example
Get-AzDevCenterAdminSchedule -PoolName DevPool -ProjectName DevProject -ResourceGroupName testRg
.Example
$schedule = @{"ResourceGroupName" = "testRg"; "ProjectName" = "DevProject"; "PoolName" = "DevPool"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
Get-AzDevCenterAdminSchedule -InputObject $schedule
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ISchedule
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/get-azdevcenteradminschedule
#>

function Get-AzDevCenterAdminSchedule {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ISchedule])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # Name of the pool.
    ${PoolName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${ProjectName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            Get = 'Az.DevCenter.private\Get-AzDevCenterAdminSchedule_Get';
            GetViaIdentity = 'Az.DevCenter.private\Get-AzDevCenterAdminSchedule_GetViaIdentity';
            List = 'Az.DevCenter.private\Get-AzDevCenterAdminSchedule_List';
        }
        if (('Get') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Name')) {
            $PSBoundParameters['Name'] = "default"
        }
        if (('Get', 'List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates an attached NetworkConnection.
.Description
Creates or updates an attached NetworkConnection.
.Example
New-AzDevCenterAdminAttachedNetwork -ConnectionName network-uswest3 -DevCenterName Contoso -ResourceGroupName testRg -NetworkConnectionId /subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/testRg/providers/Microsoft.DevCenter/NetworkConnections/network-uswest3
.Example
$attachedNetwork = @{"ResourceGroupName" = "testRg"; "DevCenterName" = "Contoso"; "AttachedNetworkConnectionName" = "network-uswest3"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminAttachedNetwork -InputObject $attachedNetwork -NetworkConnectionId /subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/testRg/providers/Microsoft.DevCenter/NetworkConnections/network-uswest3
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IAttachedNetworkConnection
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminattachednetwork
#>

function New-AzDevCenterAdminAttachedNetwork {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IAttachedNetworkConnection])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('AttachedNetworkConnectionName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the attached NetworkConnection.
    ${ConnectionName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The resource ID of the NetworkConnection you want to attach.
    ${NetworkConnectionId},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminAttachedNetwork_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminAttachedNetwork_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a catalog.
.Description
Creates or updates a catalog.
.Example
New-AzDevCenterAdminCatalog -DevCenterName Contoso -Name CentralCatalog -ResourceGroupName testRg -AdoGitBranch main -AdoGitPath "/templates" -AdoGitSecretIdentifier "https://contosokv.vault.azure.net/secrets/CentralRepoPat" -AdoGitUri "https://contoso@dev.azure.com/contoso/contosoOrg/_git/centralrepo-fakecontoso"
.Example
New-AzDevCenterAdminCatalog -DevCenterName Contoso -Name CentralCatalog -ResourceGroupName testRg -GitHubBranch main -GitHubPath "/templates" -GitHubSecretIdentifier "https://contosokv.vault.azure.net/secrets/CentralRepoPat" -GitHubUri "https://github.com/Contoso/centralrepo-fake.git"
.Example
$catalog = @{"ResourceGroupName" = "testRg"; "DevCenterName" = "Contoso"; "CatalogName" = "CentralCatalog"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminCatalog -InputObject $catalog -AdoGitBranch main -AdoGitPath "/templates" -AdoGitSecretIdentifier "https://contosokv.vault.azure.net/secrets/CentralRepoPat" -AdoGitUri "https://contoso@dev.azure.com/contoso/contosoOrg/_git/centralrepo-fakecontoso"
.Example
$catalog = @{"ResourceGroupName" = "testRg"; "DevCenterName" = "Contoso"; "CatalogName" = "CentralCatalog"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminCatalog -InputObject $catalog -GitHubBranch main -GitHubPath "/templates" -GitHubSecretIdentifier "https://contosokv.vault.azure.net/secrets/CentralRepoPat" -GitHubUri "https://github.com/Contoso/centralrepo-fake.git"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ICatalog
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradmincatalog
#>

function New-AzDevCenterAdminCatalog {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ICatalog])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('CatalogName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Catalog.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Git branch.
    ${AdoGitBranch},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The folder where the catalog items can be found inside the repository.
    ${AdoGitPath},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # A reference to the Key Vault secret containing a security token to authenticate to a Git repository.
    ${AdoGitSecretIdentifier},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Git URI.
    ${AdoGitUri},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Git branch.
    ${GitHubBranch},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The folder where the catalog items can be found inside the repository.
    ${GitHubPath},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # A reference to the Key Vault secret containing a security token to authenticate to a Git repository.
    ${GitHubSecretIdentifier},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Git URI.
    ${GitHubUri},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.CatalogSyncType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.CatalogSyncType]
    # Indicates the type of sync that is configured for the catalog.
    ${SyncType},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminCatalog_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminCatalog_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a Dev Box definition.
.Description
Creates or updates a Dev Box definition.
.Example
New-AzDevCenterAdminDevBoxDefinition -Name "WebDevBox" -DevCenterName Contoso -ResourceGroupName testRg -Location "westus3" -HibernateSupport "Enabled" -ImageReferenceId "/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/testRg/providers/Microsoft.DevCenter/devcenters/Contoso/galleries/contosogallery/images/exampleImage/version/1.0.0" -OSStorageType "ssd_1024gb" -SkuName "general_a_8c32gb_v1"
.Example
$devBoxDefinition = @{"ResourceGroupName" = "testRg"; "DevCenterName" = "Contoso"; "DevBoxDefinitionName" = "WebDevBox"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminDevBoxDefinition -InputObject $devBoxDefinition -Location "westus3" -HibernateSupport "Enabled" -ImageReferenceId "/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/testRg/providers/Microsoft.DevCenter/devcenters/Contoso/galleries/contosogallery/images/exampleImage/version/1.0.0" -OSStorageType "ssd_1024gb" -SkuName "general_a_8c32gb_v1"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IDevBoxDefinition
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradmindevboxdefinition
#>

function New-AzDevCenterAdminDevBoxDefinition {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IDevBoxDefinition])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('DevBoxDefinitionName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the Dev Box definition.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.HibernateSupport])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.HibernateSupport]
    # Indicates whether Dev Boxes created with this definition are capable of hibernation.
    # Not all images are capable of supporting hibernation.
    # To find out more see https://aka.ms/devbox/hibernate
    ${HibernateSupport},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Image ID, or Image version ID.
    # When Image ID is provided, its latest version will be used.
    ${ImageReferenceId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The storage type used for the Operating System disk of Dev Boxes created using this definition.
    ${OSStorageType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.Int32]
    # If the SKU supports scale out/in then the capacity integer should be included.
    # If scale out/in is not possible for the resource this may be omitted.
    ${SkuCapacity},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # If the service has different generations of hardware, for the same SKU, then that can be captured here.
    ${SkuFamily},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The name of the SKU.
    # Ex - P3.
    # It is typically a letter+number code
    ${SkuName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The SKU size.
    # When the name field is the combination of tier and some other value, this would be the standalone code.
    ${SkuSize},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.SkuTier])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.SkuTier]
    # This field is required to be implemented by the Resource Provider if the service has more than one tier, but is not required on a PUT.
    ${SkuTier},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api30.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminDevBoxDefinition_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminDevBoxDefinition_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a gallery.
.Description
Creates or updates a gallery.
.Example
New-AzDevCenterAdminGallery -DevCenterName Contoso -Name StandardGallery -ResourceGroupName testRg -GalleryResourceId "/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/rg1/providers/Microsoft.Compute/galleries/StandardGallery"
.Example
$gallery = @{"ResourceGroupName" = "testRg"; "DevCenterName" = "Contoso"; "GalleryName" = "StandardGallery"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminGallery -InputObject $gallery -GalleryResourceId "/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/rg1/providers/Microsoft.Compute/galleries/StandardGallery"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IGallery
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradmingallery
#>

function New-AzDevCenterAdminGallery {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IGallery])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the devcenter.
    ${DevCenterName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('GalleryName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the gallery.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The resource ID of the backing Azure Compute Gallery.
    ${GalleryResourceId},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminGallery_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminGallery_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a Network Connections resource
.Description
Creates or updates a Network Connections resource
.Example
New-AzDevCenterAdminNetworkConnection -Name eastusNetwork -ResourceGroupName testRg -Location westus3 -DomainJoinType AzureADJoin -NetworkingResourceGroupName NetworkInterfaces -SubnetId "/subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/ExampleRG/providers/Microsoft.Network/virtualNetworks/ExampleVNet/subnets/default"
 
.Example
New-AzDevCenterAdminNetworkConnection -Name eastusNetwork -ResourceGroupName testRg -Location westus3 -DomainJoinType HybridAzureADJoin -DomainName mydomaincontroller.local -DomainPassword passw0rd123 -DomainUsername testuser@mydomaincontroller.local -NetworkingResourceGroupName NetworkInterfaces -SubnetId "/subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/ExampleRG/providers/Microsoft.Network/virtualNetworks/ExampleVNet/subnets/default"
.Example
$networkConnection = @{"ResourceGroupName" = "testRg"; "NetworkConnectionName" = "eastusNetwork"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminNetworkConnection -InputObject $networkConnection -Location westus3 -DomainJoinType AzureADJoin -NetworkingResourceGroupName NetworkInterfaces -SubnetId "/subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/ExampleRG/providers/Microsoft.Network/virtualNetworks/ExampleVNet/subnets/default"
.Example
$networkConnection = @{"ResourceGroupName" = "testRg"; "NetworkConnectionName" = "eastusNetwork"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminNetworkConnection -InputObject $networkConnection -Location westus3 -DomainJoinType HybridAzureADJoin -DomainName mydomaincontroller.local -DomainPassword passw0rd123 -DomainUsername testuser@mydomaincontroller.local -NetworkingResourceGroupName NetworkInterfaces -SubnetId "/subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/ExampleRG/providers/Microsoft.Network/virtualNetworks/ExampleVNet/subnets/default"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.INetworkConnection
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminnetworkconnection
#>

function New-AzDevCenterAdminNetworkConnection {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.INetworkConnection])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('NetworkConnectionName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # Name of the Network Connection that can be applied to a Pool.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.DomainJoinType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.DomainJoinType]
    # AAD Join type.
    ${DomainJoinType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Active Directory domain name
    ${DomainName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The password for the account used to join domain
    ${DomainPassword},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The username of an Active Directory account (user or service account) that has permissions to create computer objects in Active Directory.
    # Required format: admin@contoso.com.
    ${DomainUsername},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The name for resource group where NICs will be placed.
    ${NetworkingResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Active Directory domain Organization Unit (OU)
    ${OrganizationUnit},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The subnet to attach Virtual Machines to
    ${SubnetId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api30.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminNetworkConnection_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminNetworkConnection_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a machine pool
.Description
Creates or updates a machine pool
.Example
New-AzDevCenterAdminPool -Name DevPool -ProjectName DevProject -ResourceGroupName testRg -Location westus2 -DevBoxDefinitionName WebDevBox -LocalAdministrator "Enabled" -NetworkConnectionName Network1westus2
.Example
$pool = @{"ResourceGroupName" = "testRg"; "ProjectName" = "DevProject"; "PoolName" = "DevPool"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminPool -InputObject $pool -Location westus2 -DevBoxDefinitionName WebDevBox -LocalAdministrator "Enabled" -NetworkConnectionName Network1westus2
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IPool
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminpool
#>

function New-AzDevCenterAdminPool {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IPool])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('PoolName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # Name of the pool.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${ProjectName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Name of a Dev Box definition in parent Project of this Pool
    ${DevBoxDefinitionName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The display name of the pool.
    ${DisplayName},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.LocalAdminStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.LocalAdminStatus]
    # Indicates whether owners of Dev Boxes in this pool are added as local administrators on the Dev Box.
    ${LocalAdministrator},

    [Parameter()]
    [AllowEmptyCollection()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String[]]
    # The regions of the managed virtual network (required when managedNetworkType is Managed).
    ${ManagedVirtualNetworkRegion},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Name of a Network Connection in parent Project of this Pool
    ${NetworkConnectionName},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.SingleSignOnStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.SingleSignOnStatus]
    # Indicates whether Dev Boxes in this pool are created with single sign on enabled.
    # The also requires that single sign on be enabled on the tenant.
    ${SingleSignOnStatus},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.Int32]
    # The specified time in minutes to wait before stopping a Dev Box once disconnect is detected.
    ${StopOnDisconnectGracePeriodMinute},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.StopOnDisconnectEnableStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.StopOnDisconnectEnableStatus]
    # Whether the feature to stop the Dev Box on disconnect once the grace period has lapsed is enabled.
    ${StopOnDisconnectStatus},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api30.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.VirtualNetworkType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.VirtualNetworkType]
    # Indicates whether the pool uses a Virtual Network managed by Microsoft or a customer provided network.
    ${VirtualNetworkType},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminPool_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminPool_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        if (('CreateExpanded', 'CreateViaIdentityExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('LicenseType')) {
            $PSBoundParameters['LicenseType'] = "Windows_Client"
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a project environment type.
.Description
Creates or updates a project environment type.
.Example
$identity = @{"/subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/identityGroup/providers/Microsoft.ManagedIdentity/userAssignedIdentities/testidentity1" = @{} }
$deploymentTargetId = '/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff'
$creatorRoleAssignmentRole = @{"8e3af657-a8ff-443c-a75c-2fe8c4bcb635" = @{} }
$userRoleAssignment = @{
    "e45e3m7c-176e-416a-b466-0c5ec8298f8a" = @{
        "roles" = @{
            "4cbf0b6c-e750-441c-98a7-10da8387e4d6" = @{}
        }
    }
}
 
New-AzDevCenterAdminProjectEnvironmentType -EnvironmentTypeName DevTest -ProjectName DevProject -ResourceGroupName testRg -CreatorRoleAssignmentRole $creatorRoleAssignmentRole -DeploymentTargetId $deploymentTargetId -IdentityType "SystemAssigned,UserAssigned" -IdentityUserAssignedIdentity $identity -Location "westus3" -Status "Enabled" -UserRoleAssignment $userRoleAssignment
.Example
$identity = @{"/subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/identityGroup/providers/Microsoft.ManagedIdentity/userAssignedIdentities/testidentity1" = @{} }
$deploymentTargetId = '/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff'
$creatorRoleAssignmentRole = @{"8e3af657-a8ff-443c-a75c-2fe8c4bcb635" = @{} }
$userRoleAssignment = @{
    "e45e3m7c-176e-416a-b466-0c5ec8298f8a" = @{
        "roles" = @{
            "4cbf0b6c-e750-441c-98a7-10da8387e4d6" = @{}
        }
    }
}
 
$envType = @{"ResourceGroupName" = "testRg"; "ProjectName" = "DevProject"; "EnvironmentTypeName" = "DevTest"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminProjectEnvironmentType -InputObject $envType -CreatorRoleAssignmentRole $creatorRoleAssignmentRole -DeploymentTargetId $deploymentTargetId -IdentityType "SystemAssigned,UserAssigned" -IdentityUserAssignedIdentity $identity -Location "westus3" -Status "Enabled" -UserRoleAssignment $userRoleAssignment
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IProjectEnvironmentType
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminprojectenvironmenttype
#>

function New-AzDevCenterAdminProjectEnvironmentType {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IProjectEnvironmentType])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the environment type.
    ${EnvironmentTypeName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${ProjectName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IProjectEnvironmentTypeUpdatePropertiesCreatorRoleAssignmentRoles]))]
    [System.Collections.Hashtable]
    # A map of roles to assign to the environment creator.
    ${CreatorRoleAssignmentRole},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Id of a subscription that the environment type will be mapped to.
    # The environment's resources will be deployed into this subscription.
    ${DeploymentTargetId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The display name of the project environment type.
    ${DisplayName},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ManagedServiceIdentityType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ManagedServiceIdentityType]
    # Type of managed service identity (where both SystemAssigned and UserAssigned types are allowed).
    ${IdentityType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api40.IUserAssignedIdentities]))]
    [System.Collections.Hashtable]
    # The set of user assigned identities associated with the resource.
    # The userAssignedIdentities dictionary keys will be ARM resource ids in the form: '/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ManagedIdentity/userAssignedIdentities/{identityName}.
    # The dictionary values can be empty objects ({}) in requests.
    ${IdentityUserAssignedIdentity},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The geo-location for the environment type
    ${Location},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.EnvironmentTypeEnableStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.EnvironmentTypeEnableStatus]
    # Defines whether this Environment Type can be used in this Project.
    ${Status},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ITags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IProjectEnvironmentTypeUpdatePropertiesUserRoleAssignments]))]
    [System.Collections.Hashtable]
    # Role Assignments created on environment backing resources.
    # This is a mapping from a user object ID to an object of role definition IDs.
    ${UserRoleAssignment},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminProjectEnvironmentType_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminProjectEnvironmentType_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a project.
.Description
Creates or updates a project.
.Example
New-AzDevCenterAdminProject -Name DevProject -ResourceGroupName testRg -Location eastus -DevCenterId "/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/testRg/providers/Microsoft.DevCenter/devcenters/Contoso" -MaxDevBoxesPerUser 3
.Example
$project = @{"ResourceGroupName" = "testRg"; "ProjectName" = "DevProject"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminProject -InputObject $project -Location eastus -DevCenterId "/subscriptions/0ac520ee-14c0-480f-b6c9-0a90c58ffff/resourceGroups/testRg/providers/Microsoft.DevCenter/devcenters/Contoso" -MaxDevBoxesPerUser 3
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IProject
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminproject
#>

function New-AzDevCenterAdminProject {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.IProject])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Alias('ProjectName')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Description of the project.
    ${Description},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # Resource Id of an associated DevCenter
    ${DevCenterId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The display name of the project.
    ${DisplayName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.Int32]
    # When specified, limits the maximum number of Dev Boxes a single user can create across all pools in the project.
    # This will have no effect on existing Dev Boxes when reduced.
    ${MaxDevBoxesPerUser},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api30.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminProject_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminProject_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Creates or updates a Schedule.
.Description
Creates or updates a Schedule.
.Example
New-AzDevCenterAdminSchedule -PoolName DevPool -ProjectName DevProject -ResourceGroupName testRg -State "Enabled" -Time "18:30" -TimeZone "America/Los_Angeles"
.Example
$schedule = @{"ResourceGroupName" = "testRg"; "ProjectName" = "DevProject"; "PoolName" = "DevPool"; "SubscriptionId" = "0ac520ee-14c0-480f-b6c9-0a90c58ffff"}
New-AzDevCenterAdminSchedule -InputObject $schedule
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ISchedule
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/new-azdevcenteradminschedule
#>

function New-AzDevCenterAdminSchedule {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ISchedule])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # Name of the pool.
    ${PoolName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${ProjectName},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ScheduleEnableStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ScheduleEnableStatus]
    # Indicates whether or not this scheduled task is enabled.
    ${State},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The target time to trigger the action.
    # The format is HH:MM.
    ${Time},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The IANA timezone id at which the schedule should execute.
    ${TimeZone},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            CreateExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminSchedule_CreateExpanded';
            CreateViaIdentityExpanded = 'Az.DevCenter.private\New-AzDevCenterAdminSchedule_CreateViaIdentityExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Name')) {
            $PSBoundParameters['Name'] = "default"
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        if (('CreateExpanded', 'CreateViaIdentityExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Frequency')) {
            $PSBoundParameters['Frequency'] = "Daily"
        }
        if (('CreateExpanded', 'CreateViaIdentityExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('PropertiesType')) {
            $PSBoundParameters['PropertiesType'] = "StopDevBox"
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Deletes a Scheduled.
.Description
Deletes a Scheduled.
.Example
Remove-AzDevCenterAdminSchedule -PoolName DevPool -ProjectName DevProject -ResourceGroupName testRg
.Example
$schedule = Get-AzDevCenterAdminSchedule -PoolName DevPool -ProjectName DevProject -ResourceGroupName testRg
Remove-AzDevCenterAdminSchedule -InputObject $schedule
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/remove-azdevcenteradminschedule
#>

function Remove-AzDevCenterAdminSchedule {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # Name of the pool.
    ${PoolName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${ProjectName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            Delete = 'Az.DevCenter.private\Remove-AzDevCenterAdminSchedule_Delete';
            DeleteViaIdentity = 'Az.DevCenter.private\Remove-AzDevCenterAdminSchedule_DeleteViaIdentity';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Name')) {
            $PSBoundParameters['Name'] = "default"
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

<#
.Synopsis
Partially updates a Scheduled.
.Description
Partially updates a Scheduled.
.Example
New-AzDevCenterAdminSchedule -PoolName DevPool -ProjectName DevProject -ResourceGroupName testRg -State "Disabled" -Time "17:30" -TimeZone "America/New_York"
.Example
$scheduleInput = Get-AzDevCenterAdminSchedule -PoolName DevPool -ProjectName DevProject -ResourceGroupName testRg
 
New-AzDevCenterAdminSchedule -InputObject $scheduleInput -State "Disabled" -Time "17:30" -TimeZone "America/New_York"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ISchedule
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDevCenterIdentity>: Identity Parameter
  [AttachedNetworkConnectionName <String>]: The name of the attached NetworkConnection.
  [CatalogName <String>]: The name of the Catalog.
  [DevBoxDefinitionName <String>]: The name of the Dev Box definition.
  [DevCenterName <String>]: The name of the devcenter.
  [EnvironmentDefinitionName <String>]: The name of the Environment Definition.
  [EnvironmentTypeName <String>]: The name of the environment type.
  [GalleryName <String>]: The name of the gallery.
  [Id <String>]: Resource identity path
  [ImageName <String>]: The name of the image.
  [Location <String>]: The Azure region
  [NetworkConnectionName <String>]: Name of the Network Connection that can be applied to a Pool.
  [OperationId <String>]: The ID of an ongoing async operation
  [PoolName <String>]: Name of the pool.
  [ProjectName <String>]: The name of the project.
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [ScheduleName <String>]: The name of the schedule that uniquely identifies it.
  [SubscriptionId <String>]: The ID of the target subscription.
  [TaskName <String>]: The name of the Task.
  [VersionName <String>]: The version of the image.
.Link
https://learn.microsoft.com/powershell/module/az.devcenter/update-azdevcenteradminschedule
#>

function Update-AzDevCenterAdminSchedule {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ISchedule])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # Name of the pool.
    ${PoolName},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the project.
    ${ProjectName},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.IDevCenterIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ScheduleEnableStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ScheduleEnableStatus]
    # Indicates whether or not this scheduled task is enabled.
    ${State},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Models.Api20231001Preview.ITags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The target time to trigger the action.
    # The format is HH:MM.
    ${Time},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [System.String]
    # The IANA timezone id at which the schedule should execute.
    ${TimeZone},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ScheduledType])]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Support.ScheduledType]
    # Supported type this scheduled task represents.
    ${Type},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.DevCenter.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        $mapping = @{
            UpdateExpanded = 'Az.DevCenter.private\Update-AzDevCenterAdminSchedule_UpdateExpanded';
            UpdateViaIdentityExpanded = 'Az.DevCenter.private\Update-AzDevCenterAdminSchedule_UpdateViaIdentityExpanded';
        }
        if (('UpdateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Name')) {
            $PSBoundParameters['Name'] = "default"
        }
        if (('UpdateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        if (('UpdateExpanded', 'UpdateViaIdentityExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Frequency')) {
            $PSBoundParameters['Frequency'] = "Daily"
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {

        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {

        throw
    }

}
end {
    try {
        $steppablePipeline.End()

    } catch {

        throw
    }
} 
}

# SIG # Begin signature block
# MIIoOQYJKoZIhvcNAQcCoIIoKjCCKCYCAQExDzANBglghkgBZQMEAgEFADB5Bgor
# BgEEAYI3AgEEoGswaTA0BgorBgEEAYI3AgEeMCYCAwEAAAQQH8w7YFlLCE63JNLG
# KX7zUQIBAAIBAAIBAAIBAAIBADAxMA0GCWCGSAFlAwQCAQUABCD7cK6vTttnoxRv
# HBsMUtDj3xdFDsiULvyljno8LT/g7qCCDYUwggYDMIID66ADAgECAhMzAAADri01
# UchTj1UdAAAAAAOuMA0GCSqGSIb3DQEBCwUAMH4xCzAJBgNVBAYTAlVTMRMwEQYD
# VQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVNaWNy
# b3NvZnQgQ29ycG9yYXRpb24xKDAmBgNVBAMTH01pY3Jvc29mdCBDb2RlIFNpZ25p
# bmcgUENBIDIwMTEwHhcNMjMxMTE2MTkwODU5WhcNMjQxMTE0MTkwODU5WjB0MQsw
# CQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9u
# ZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMR4wHAYDVQQDExVNaWNy
# b3NvZnQgQ29ycG9yYXRpb24wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIB
# AQD0IPymNjfDEKg+YyE6SjDvJwKW1+pieqTjAY0CnOHZ1Nj5irGjNZPMlQ4HfxXG
# yAVCZcEWE4x2sZgam872R1s0+TAelOtbqFmoW4suJHAYoTHhkznNVKpscm5fZ899
# QnReZv5WtWwbD8HAFXbPPStW2JKCqPcZ54Y6wbuWV9bKtKPImqbkMcTejTgEAj82
# 6GQc6/Th66Koka8cUIvz59e/IP04DGrh9wkq2jIFvQ8EDegw1B4KyJTIs76+hmpV
# M5SwBZjRs3liOQrierkNVo11WuujB3kBf2CbPoP9MlOyyezqkMIbTRj4OHeKlamd
# WaSFhwHLJRIQpfc8sLwOSIBBAgMBAAGjggGCMIIBfjAfBgNVHSUEGDAWBgorBgEE
# AYI3TAgBBggrBgEFBQcDAzAdBgNVHQ4EFgQUhx/vdKmXhwc4WiWXbsf0I53h8T8w
# VAYDVR0RBE0wS6RJMEcxLTArBgNVBAsTJE1pY3Jvc29mdCBJcmVsYW5kIE9wZXJh
# dGlvbnMgTGltaXRlZDEWMBQGA1UEBRMNMjMwMDEyKzUwMTgzNjAfBgNVHSMEGDAW
# gBRIbmTlUAXTgqoXNzcitW2oynUClTBUBgNVHR8ETTBLMEmgR6BFhkNodHRwOi8v
# d3d3Lm1pY3Jvc29mdC5jb20vcGtpb3BzL2NybC9NaWNDb2RTaWdQQ0EyMDExXzIw
# MTEtMDctMDguY3JsMGEGCCsGAQUFBwEBBFUwUzBRBggrBgEFBQcwAoZFaHR0cDov
# L3d3dy5taWNyb3NvZnQuY29tL3BraW9wcy9jZXJ0cy9NaWNDb2RTaWdQQ0EyMDEx
# XzIwMTEtMDctMDguY3J0MAwGA1UdEwEB/wQCMAAwDQYJKoZIhvcNAQELBQADggIB
# AGrJYDUS7s8o0yNprGXRXuAnRcHKxSjFmW4wclcUTYsQZkhnbMwthWM6cAYb/h2W
# 5GNKtlmj/y/CThe3y/o0EH2h+jwfU/9eJ0fK1ZO/2WD0xi777qU+a7l8KjMPdwjY
# 0tk9bYEGEZfYPRHy1AGPQVuZlG4i5ymJDsMrcIcqV8pxzsw/yk/O4y/nlOjHz4oV
# APU0br5t9tgD8E08GSDi3I6H57Ftod9w26h0MlQiOr10Xqhr5iPLS7SlQwj8HW37
# ybqsmjQpKhmWul6xiXSNGGm36GarHy4Q1egYlxhlUnk3ZKSr3QtWIo1GGL03hT57
# xzjL25fKiZQX/q+II8nuG5M0Qmjvl6Egltr4hZ3e3FQRzRHfLoNPq3ELpxbWdH8t
# Nuj0j/x9Crnfwbki8n57mJKI5JVWRWTSLmbTcDDLkTZlJLg9V1BIJwXGY3i2kR9i
# 5HsADL8YlW0gMWVSlKB1eiSlK6LmFi0rVH16dde+j5T/EaQtFz6qngN7d1lvO7uk
# 6rtX+MLKG4LDRsQgBTi6sIYiKntMjoYFHMPvI/OMUip5ljtLitVbkFGfagSqmbxK
# 7rJMhC8wiTzHanBg1Rrbff1niBbnFbbV4UDmYumjs1FIpFCazk6AADXxoKCo5TsO
# zSHqr9gHgGYQC2hMyX9MGLIpowYCURx3L7kUiGbOiMwaMIIHejCCBWKgAwIBAgIK
# YQ6Q0gAAAAAAAzANBgkqhkiG9w0BAQsFADCBiDELMAkGA1UEBhMCVVMxEzARBgNV
# BAgTCldhc2hpbmd0b24xEDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jv
# c29mdCBDb3Jwb3JhdGlvbjEyMDAGA1UEAxMpTWljcm9zb2Z0IFJvb3QgQ2VydGlm
# aWNhdGUgQXV0aG9yaXR5IDIwMTEwHhcNMTEwNzA4MjA1OTA5WhcNMjYwNzA4MjEw
# OTA5WjB+MQswCQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UE
# BxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSgwJgYD
# VQQDEx9NaWNyb3NvZnQgQ29kZSBTaWduaW5nIFBDQSAyMDExMIICIjANBgkqhkiG
# 9w0BAQEFAAOCAg8AMIICCgKCAgEAq/D6chAcLq3YbqqCEE00uvK2WCGfQhsqa+la
# UKq4BjgaBEm6f8MMHt03a8YS2AvwOMKZBrDIOdUBFDFC04kNeWSHfpRgJGyvnkmc
# 6Whe0t+bU7IKLMOv2akrrnoJr9eWWcpgGgXpZnboMlImEi/nqwhQz7NEt13YxC4D
# dato88tt8zpcoRb0RrrgOGSsbmQ1eKagYw8t00CT+OPeBw3VXHmlSSnnDb6gE3e+
# lD3v++MrWhAfTVYoonpy4BI6t0le2O3tQ5GD2Xuye4Yb2T6xjF3oiU+EGvKhL1nk
# kDstrjNYxbc+/jLTswM9sbKvkjh+0p2ALPVOVpEhNSXDOW5kf1O6nA+tGSOEy/S6
# A4aN91/w0FK/jJSHvMAhdCVfGCi2zCcoOCWYOUo2z3yxkq4cI6epZuxhH2rhKEmd
# X4jiJV3TIUs+UsS1Vz8kA/DRelsv1SPjcF0PUUZ3s/gA4bysAoJf28AVs70b1FVL
# 5zmhD+kjSbwYuER8ReTBw3J64HLnJN+/RpnF78IcV9uDjexNSTCnq47f7Fufr/zd
# sGbiwZeBe+3W7UvnSSmnEyimp31ngOaKYnhfsi+E11ecXL93KCjx7W3DKI8sj0A3
# T8HhhUSJxAlMxdSlQy90lfdu+HggWCwTXWCVmj5PM4TasIgX3p5O9JawvEagbJjS
# 4NaIjAsCAwEAAaOCAe0wggHpMBAGCSsGAQQBgjcVAQQDAgEAMB0GA1UdDgQWBBRI
# bmTlUAXTgqoXNzcitW2oynUClTAZBgkrBgEEAYI3FAIEDB4KAFMAdQBiAEMAQTAL
# BgNVHQ8EBAMCAYYwDwYDVR0TAQH/BAUwAwEB/zAfBgNVHSMEGDAWgBRyLToCMZBD
# uRQFTuHqp8cx0SOJNDBaBgNVHR8EUzBRME+gTaBLhklodHRwOi8vY3JsLm1pY3Jv
# c29mdC5jb20vcGtpL2NybC9wcm9kdWN0cy9NaWNSb29DZXJBdXQyMDExXzIwMTFf
# MDNfMjIuY3JsMF4GCCsGAQUFBwEBBFIwUDBOBggrBgEFBQcwAoZCaHR0cDovL3d3
# dy5taWNyb3NvZnQuY29tL3BraS9jZXJ0cy9NaWNSb29DZXJBdXQyMDExXzIwMTFf
# MDNfMjIuY3J0MIGfBgNVHSAEgZcwgZQwgZEGCSsGAQQBgjcuAzCBgzA/BggrBgEF
# BQcCARYzaHR0cDovL3d3dy5taWNyb3NvZnQuY29tL3BraW9wcy9kb2NzL3ByaW1h
# cnljcHMuaHRtMEAGCCsGAQUFBwICMDQeMiAdAEwAZQBnAGEAbABfAHAAbwBsAGkA
# YwB5AF8AcwB0AGEAdABlAG0AZQBuAHQALiAdMA0GCSqGSIb3DQEBCwUAA4ICAQBn
# 8oalmOBUeRou09h0ZyKbC5YR4WOSmUKWfdJ5DJDBZV8uLD74w3LRbYP+vj/oCso7
# v0epo/Np22O/IjWll11lhJB9i0ZQVdgMknzSGksc8zxCi1LQsP1r4z4HLimb5j0b
# pdS1HXeUOeLpZMlEPXh6I/MTfaaQdION9MsmAkYqwooQu6SpBQyb7Wj6aC6VoCo/
# KmtYSWMfCWluWpiW5IP0wI/zRive/DvQvTXvbiWu5a8n7dDd8w6vmSiXmE0OPQvy
# CInWH8MyGOLwxS3OW560STkKxgrCxq2u5bLZ2xWIUUVYODJxJxp/sfQn+N4sOiBp
# mLJZiWhub6e3dMNABQamASooPoI/E01mC8CzTfXhj38cbxV9Rad25UAqZaPDXVJi
# hsMdYzaXht/a8/jyFqGaJ+HNpZfQ7l1jQeNbB5yHPgZ3BtEGsXUfFL5hYbXw3MYb
# BL7fQccOKO7eZS/sl/ahXJbYANahRr1Z85elCUtIEJmAH9AAKcWxm6U/RXceNcbS
# oqKfenoi+kiVH6v7RyOA9Z74v2u3S5fi63V4GuzqN5l5GEv/1rMjaHXmr/r8i+sL
# gOppO6/8MO0ETI7f33VtY5E90Z1WTk+/gFcioXgRMiF670EKsT/7qMykXcGhiJtX
# cVZOSEXAQsmbdlsKgEhr/Xmfwb1tbWrJUnMTDXpQzTGCGgowghoGAgEBMIGVMH4x
# CzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRt
# b25kMR4wHAYDVQQKExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xKDAmBgNVBAMTH01p
# Y3Jvc29mdCBDb2RlIFNpZ25pbmcgUENBIDIwMTECEzMAAAOuLTVRyFOPVR0AAAAA
# A64wDQYJYIZIAWUDBAIBBQCgga4wGQYJKoZIhvcNAQkDMQwGCisGAQQBgjcCAQQw
# HAYKKwYBBAGCNwIBCzEOMAwGCisGAQQBgjcCARUwLwYJKoZIhvcNAQkEMSIEILGu
# JEwN7NlBptkAfhSFXvWoBKvVQfiqBc9VIo6smzPYMEIGCisGAQQBgjcCAQwxNDAy
# oBSAEgBNAGkAYwByAG8AcwBvAGYAdKEagBhodHRwOi8vd3d3Lm1pY3Jvc29mdC5j
# b20wDQYJKoZIhvcNAQEBBQAEggEAFcwfo5oPquBYdXuCytLucFvvjyM3RcRV4uAb
# l50NJsjaFGlxhEjwOTI1wDd4ijawrmzwj6tYCk538mRb/GedEexwBpAvxDCJK8kq
# 6vExBbUVqB/G+UYlhg31jA35giHg2w4UIb+PxMPzYz+P1m5RJNqvDKMke8QZq1rU
# oSlWCzxV8eZE6Z9wrTo/dFXNZcQkhY6KtP2ijyGL5lKxSx2te4zpjS1mmo/GlNvW
# 0rGZu0vCXlJSOUNRtZBkVrCZKNiMBKTWX5AdfWsMdRmBWRqngd4doKYmU3TtKzIW
# 5nT2Wrr/fSuRqwqBN4RgNg1InG1eAwrgnWnjYDSUJbcc6J9r2qGCF5QwgheQBgor
# BgEEAYI3AwMBMYIXgDCCF3wGCSqGSIb3DQEHAqCCF20wghdpAgEDMQ8wDQYJYIZI
# AWUDBAIBBQAwggFSBgsqhkiG9w0BCRABBKCCAUEEggE9MIIBOQIBAQYKKwYBBAGE
# WQoDATAxMA0GCWCGSAFlAwQCAQUABCDIL41quECeiaPVgAlmRVv42iIr1rcu7MYX
# mrFhaTBL5wIGZXsa6P4bGBMyMDIzMTIyNzA1NTU0My45ODRaMASAAgH0oIHRpIHO
# MIHLMQswCQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMH
# UmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSUwIwYDVQQL
# ExxNaWNyb3NvZnQgQW1lcmljYSBPcGVyYXRpb25zMScwJQYDVQQLEx5uU2hpZWxk
# IFRTUyBFU046OTYwMC0wNUUwLUQ5NDcxJTAjBgNVBAMTHE1pY3Jvc29mdCBUaW1l
# LVN0YW1wIFNlcnZpY2WgghHqMIIHIDCCBQigAwIBAgITMwAAAdj8SzOlHdiFFQAB
# AAAB2DANBgkqhkiG9w0BAQsFADB8MQswCQYDVQQGEwJVUzETMBEGA1UECBMKV2Fz
# aGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0IENv
# cnBvcmF0aW9uMSYwJAYDVQQDEx1NaWNyb3NvZnQgVGltZS1TdGFtcCBQQ0EgMjAx
# MDAeFw0yMzA1MjUxOTEyNDBaFw0yNDAyMDExOTEyNDBaMIHLMQswCQYDVQQGEwJV
# UzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UE
# ChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMSUwIwYDVQQLExxNaWNyb3NvZnQgQW1l
# cmljYSBPcGVyYXRpb25zMScwJQYDVQQLEx5uU2hpZWxkIFRTUyBFU046OTYwMC0w
# NUUwLUQ5NDcxJTAjBgNVBAMTHE1pY3Jvc29mdCBUaW1lLVN0YW1wIFNlcnZpY2Uw
# ggIiMA0GCSqGSIb3DQEBAQUAA4ICDwAwggIKAoICAQDNeOsp0fXgAz7GUF0N+/0E
# HcQFri6wliTbmQNmFm8Di0CeQ8n4bd2td5tbtzTsEk7dY2/nmWY9kqEvavbdYRbN
# c+Esv8Nfv6MMImH9tCr5Kxs254MQ0jmpRucrm3uHW421Cfva0hNQEKN1NS0rad1U
# /ZOme+V/QeSdWKofCThxf/fsTeR41WbqUNAJN/ml3sbOH8aLhXyTHG7sVt/WUSLp
# T0fLlNXYGRXzavJ1qUOePzyj86hiKyzQJLTjKr7GpTGFySiIcMW/nyK6NK7Rjfy1
# ofLdRvvtHIdJvpmPSze3CH/PYFU21TqhIhZ1+AS7RlDo18MSDGPHpTCWwo7lgtY1
# pY6RvPIguF3rbdtvhoyjn5mPbs5pgjGO83odBNP7IlKAj4BbHUXeHit3Da2g7A4j
# icKrLMjo6sGeetJoeKooj5iNTXbDwLKM9HlUdXZSz62ftCZVuK9FBgkAO9MRN2pq
# BnptBGfllm+21FLk6E3vVXMGHB5eOgFfAy84XlIieycQArIDsEm92KHIFOGOgZlW
# xe69leXvMHjYJlpo2VVMtLwXLd3tjS/173ouGMRaiLInLm4oIgqDtjUIqvwYQUh3
# RN6wwdF75nOmrpr8wRw1n/BKWQ5mhQxaMBqqvkbuu1sLeSMPv2PMZIddXPbiOvAx
# adqPkBcMPUBmrySYoLTxwwIDAQABo4IBSTCCAUUwHQYDVR0OBBYEFPbTj0x8PZBL
# Yn0MZBI6nGh5qIlWMB8GA1UdIwQYMBaAFJ+nFV0AXmJdg/Tl0mWnG1M1GelyMF8G
# A1UdHwRYMFYwVKBSoFCGTmh0dHA6Ly93d3cubWljcm9zb2Z0LmNvbS9wa2lvcHMv
# Y3JsL01pY3Jvc29mdCUyMFRpbWUtU3RhbXAlMjBQQ0ElMjAyMDEwKDEpLmNybDBs
# BggrBgEFBQcBAQRgMF4wXAYIKwYBBQUHMAKGUGh0dHA6Ly93d3cubWljcm9zb2Z0
# LmNvbS9wa2lvcHMvY2VydHMvTWljcm9zb2Z0JTIwVGltZS1TdGFtcCUyMFBDQSUy
# MDIwMTAoMSkuY3J0MAwGA1UdEwEB/wQCMAAwFgYDVR0lAQH/BAwwCgYIKwYBBQUH
# AwgwDgYDVR0PAQH/BAQDAgeAMA0GCSqGSIb3DQEBCwUAA4ICAQCunA6aSP48oJ1V
# D+SMF1/7SFiTGD6zyLC3Ju9HtLjqYYq1FJWUx10I5XqU0alcXTUFUoUIUPSvfeX/
# dX0MgofUG+cOXdokaHHSlo6PZIDXnUClpkRix9xCN37yFBpcwGLzEZlDKJb2gDq/
# FBGC8snTlBSEOBjV0eE8ICVUkOJzIAttExaeQWJ5SerUr63nq6X7PmQvk1OLFl3F
# JoW4+5zKqriY/PKGssOaA5ZjBZEyU+o7+P3icL/wZ0G3ymlT+Ea4h9f3q5aVdGVB
# dshYa/SehGmnUvGMA8j5Ct24inx+bVOuF/E/2LjIp+mEary5mOTrANVKLym2kW3e
# QxF/I9cj87xndiYH55XfrWMk9bsRToxOpRb9EpbCB5cSyKNvxQ8D00qd2TndVEJF
# pgyBHQJS/XEK5poeJZ5qgmCFAj4VUPB/dPXHdTm1QXJI3cO7DRyPUZAYMwQ3KhPl
# M2hP2OfBJIr/VsDsh3szLL2ZJuerjshhxYGVboMud9aNoRjlz1Mcn4iEota4tam2
# 4FxDyHrqFm6EUQu/pDYEDquuvQFGb5glIck4rKqBnRlrRoiRj0qdhO3nootVg/1S
# P0zTLC1RrxjuTEVe3PKrETbtvcODoGh912Xrtf4wbMwpra8jYszzr3pf0905zzL8
# b8n8kuMBChBYfFds916KTjc4TGNU9TCCB3EwggVZoAMCAQICEzMAAAAVxedrngKb
# SZkAAAAAABUwDQYJKoZIhvcNAQELBQAwgYgxCzAJBgNVBAYTAlVTMRMwEQYDVQQI
# EwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVNaWNyb3Nv
# ZnQgQ29ycG9yYXRpb24xMjAwBgNVBAMTKU1pY3Jvc29mdCBSb290IENlcnRpZmlj
# YXRlIEF1dGhvcml0eSAyMDEwMB4XDTIxMDkzMDE4MjIyNVoXDTMwMDkzMDE4MzIy
# NVowfDELMAkGA1UEBhMCVVMxEzARBgNVBAgTCldhc2hpbmd0b24xEDAOBgNVBAcT
# B1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jvc29mdCBDb3Jwb3JhdGlvbjEmMCQGA1UE
# AxMdTWljcm9zb2Z0IFRpbWUtU3RhbXAgUENBIDIwMTAwggIiMA0GCSqGSIb3DQEB
# AQUAA4ICDwAwggIKAoICAQDk4aZM57RyIQt5osvXJHm9DtWC0/3unAcH0qlsTnXI
# yjVX9gF/bErg4r25PhdgM/9cT8dm95VTcVrifkpa/rg2Z4VGIwy1jRPPdzLAEBjo
# YH1qUoNEt6aORmsHFPPFdvWGUNzBRMhxXFExN6AKOG6N7dcP2CZTfDlhAnrEqv1y
# aa8dq6z2Nr41JmTamDu6GnszrYBbfowQHJ1S/rboYiXcag/PXfT+jlPP1uyFVk3v
# 3byNpOORj7I5LFGc6XBpDco2LXCOMcg1KL3jtIckw+DJj361VI/c+gVVmG1oO5pG
# ve2krnopN6zL64NF50ZuyjLVwIYwXE8s4mKyzbnijYjklqwBSru+cakXW2dg3viS
# kR4dPf0gz3N9QZpGdc3EXzTdEonW/aUgfX782Z5F37ZyL9t9X4C626p+Nuw2TPYr
# bqgSUei/BQOj0XOmTTd0lBw0gg/wEPK3Rxjtp+iZfD9M269ewvPV2HM9Q07BMzlM
# jgK8QmguEOqEUUbi0b1qGFphAXPKZ6Je1yh2AuIzGHLXpyDwwvoSCtdjbwzJNmSL
# W6CmgyFdXzB0kZSU2LlQ+QuJYfM2BjUYhEfb3BvR/bLUHMVr9lxSUV0S2yW6r1AF
# emzFER1y7435UsSFF5PAPBXbGjfHCBUYP3irRbb1Hode2o+eFnJpxq57t7c+auIu
# rQIDAQABo4IB3TCCAdkwEgYJKwYBBAGCNxUBBAUCAwEAATAjBgkrBgEEAYI3FQIE
# FgQUKqdS/mTEmr6CkTxGNSnPEP8vBO4wHQYDVR0OBBYEFJ+nFV0AXmJdg/Tl0mWn
# G1M1GelyMFwGA1UdIARVMFMwUQYMKwYBBAGCN0yDfQEBMEEwPwYIKwYBBQUHAgEW
# M2h0dHA6Ly93d3cubWljcm9zb2Z0LmNvbS9wa2lvcHMvRG9jcy9SZXBvc2l0b3J5
# Lmh0bTATBgNVHSUEDDAKBggrBgEFBQcDCDAZBgkrBgEEAYI3FAIEDB4KAFMAdQBi
# AEMAQTALBgNVHQ8EBAMCAYYwDwYDVR0TAQH/BAUwAwEB/zAfBgNVHSMEGDAWgBTV
# 9lbLj+iiXGJo0T2UkFvXzpoYxDBWBgNVHR8ETzBNMEugSaBHhkVodHRwOi8vY3Js
# Lm1pY3Jvc29mdC5jb20vcGtpL2NybC9wcm9kdWN0cy9NaWNSb29DZXJBdXRfMjAx
# MC0wNi0yMy5jcmwwWgYIKwYBBQUHAQEETjBMMEoGCCsGAQUFBzAChj5odHRwOi8v
# d3d3Lm1pY3Jvc29mdC5jb20vcGtpL2NlcnRzL01pY1Jvb0NlckF1dF8yMDEwLTA2
# LTIzLmNydDANBgkqhkiG9w0BAQsFAAOCAgEAnVV9/Cqt4SwfZwExJFvhnnJL/Klv
# 6lwUtj5OR2R4sQaTlz0xM7U518JxNj/aZGx80HU5bbsPMeTCj/ts0aGUGCLu6WZn
# OlNN3Zi6th542DYunKmCVgADsAW+iehp4LoJ7nvfam++Kctu2D9IdQHZGN5tggz1
# bSNU5HhTdSRXud2f8449xvNo32X2pFaq95W2KFUn0CS9QKC/GbYSEhFdPSfgQJY4
# rPf5KYnDvBewVIVCs/wMnosZiefwC2qBwoEZQhlSdYo2wh3DYXMuLGt7bj8sCXgU
# 6ZGyqVvfSaN0DLzskYDSPeZKPmY7T7uG+jIa2Zb0j/aRAfbOxnT99kxybxCrdTDF
# NLB62FD+CljdQDzHVG2dY3RILLFORy3BFARxv2T5JL5zbcqOCb2zAVdJVGTZc9d/
# HltEAY5aGZFrDZ+kKNxnGSgkujhLmm77IVRrakURR6nxt67I6IleT53S0Ex2tVdU
# CbFpAUR+fKFhbHP+CrvsQWY9af3LwUFJfn6Tvsv4O+S3Fb+0zj6lMVGEvL8CwYKi
# excdFYmNcP7ntdAoGokLjzbaukz5m/8K6TT4JDVnK+ANuOaMmdbhIurwJ0I9JZTm
# dHRbatGePu1+oDEzfbzL6Xu/OHBE0ZDxyKs6ijoIYn/ZcGNTTY3ugm2lBRDBcQZq
# ELQdVTNYs6FwZvKhggNNMIICNQIBATCB+aGB0aSBzjCByzELMAkGA1UEBhMCVVMx
# EzARBgNVBAgTCldhc2hpbmd0b24xEDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoT
# FU1pY3Jvc29mdCBDb3Jwb3JhdGlvbjElMCMGA1UECxMcTWljcm9zb2Z0IEFtZXJp
# Y2EgT3BlcmF0aW9uczEnMCUGA1UECxMeblNoaWVsZCBUU1MgRVNOOjk2MDAtMDVF
# MC1EOTQ3MSUwIwYDVQQDExxNaWNyb3NvZnQgVGltZS1TdGFtcCBTZXJ2aWNloiMK
# AQEwBwYFKw4DAhoDFQBIp++xUJ+f85VrnbzdkRMSpBmvL6CBgzCBgKR+MHwxCzAJ
# BgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25k
# MR4wHAYDVQQKExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xJjAkBgNVBAMTHU1pY3Jv
# c29mdCBUaW1lLVN0YW1wIFBDQSAyMDEwMA0GCSqGSIb3DQEBCwUAAgUA6TYTszAi
# GA8yMDIzMTIyNzAzMDgzNVoYDzIwMjMxMjI4MDMwODM1WjB0MDoGCisGAQQBhFkK
# BAExLDAqMAoCBQDpNhOzAgEAMAcCAQACAg87MAcCAQACAhNCMAoCBQDpN2UzAgEA
# MDYGCisGAQQBhFkKBAIxKDAmMAwGCisGAQQBhFkKAwKgCjAIAgEAAgMHoSChCjAI
# AgEAAgMBhqAwDQYJKoZIhvcNAQELBQADggEBAC5vAi9RUbHlzWuB4XQ6JWnOz28C
# rDyjygu6MYbyFfq/QsAHxnGG6FCr5XZIvnPUMkU6U5ocut/3xL1RDBYQX8De88zs
# u/kuQ9J06qQHDdTuNa+UhB+lc1qxhIjUi3/FnXOkYTdxgCT6VHedEK+puUF/hOi1
# NJnJn2PrUYBFUDBu0eAFLb7GmxgdiQj3scRR3lge+5OOKUHOD8WEwuK101ZcohUy
# tddL+wlHuFlnON1jmwNj07di12VYUXbd+cKImECwYg9NAgjZP48dniN77Hlr9XA/
# ozpzPtlG4chjdbMu9mANFcK1E+94FOasVOd9FuL1rrEsSRv6pz17kjmHHvIxggQN
# MIIECQIBATCBkzB8MQswCQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQ
# MA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9u
# MSYwJAYDVQQDEx1NaWNyb3NvZnQgVGltZS1TdGFtcCBQQ0EgMjAxMAITMwAAAdj8
# SzOlHdiFFQABAAAB2DANBglghkgBZQMEAgEFAKCCAUowGgYJKoZIhvcNAQkDMQ0G
# CyqGSIb3DQEJEAEEMC8GCSqGSIb3DQEJBDEiBCD/QXkfxtnlbIB8hJDCX+Yfy0fb
# IEjOdi/hQhYiDrB6SjCB+gYLKoZIhvcNAQkQAi8xgeowgecwgeQwgb0EIDrjIX/8
# CZN3RTABMNt5u73Mi3o3fmvq2j8Sik+2s75UMIGYMIGApH4wfDELMAkGA1UEBhMC
# VVMxEzARBgNVBAgTCldhc2hpbmd0b24xEDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNV
# BAoTFU1pY3Jvc29mdCBDb3Jwb3JhdGlvbjEmMCQGA1UEAxMdTWljcm9zb2Z0IFRp
# bWUtU3RhbXAgUENBIDIwMTACEzMAAAHY/EszpR3YhRUAAQAAAdgwIgQg/+G4pAoO
# ZxHqUoeYPXBM3ZKxKU85WYA059nzdOgMiXIwDQYJKoZIhvcNAQELBQAEggIAgdod
# hAMSTKkYwlDkgW/PUog1PfcVRVNbYHGx2Qx4ySoHEhk/KUGgHyAJCa1XJBGlY098
# 0B60fceZgiW7i33T/br/t1DzL+nMXA+P4b8rocZItqgnTi1sVz6IIeoPCKyoLD/h
# Vru1jqkAF0D1t885jdN5GB7aF+7LxobhaI1Wxhfcn/j3gw3mx92qVWxEOfgoILOc
# KbUZmSaMp3QLKM62bmYO45dtVPZziYQvIaFaJrA82bEImxtIyfIpOw8d3bnwpLPu
# 4Orp5YRN2m7Ur7JCQcVp3AL3UtbrsVPXUseRWkB2wNvG3s+b/xHGLWeDrPAP7Qjl
# lkJFxfOTsKwTSFYvo0dCnUhpHm4fClV0unjF47/CFe+T/lHVuOSByCSZcfXT9Ndu
# MXzGjfeDs0U25Y76gOoz0XyFu+18xl0xlM4c/P7pazlwom3JqwPEHx8rZUK7mVX5
# NbhFBIegfuyhPoD1I+F9ToiA588Tcjx0XRf+m6mE1fn5QOJNEYtAIn9xunsYBsa+
# nfiqQAakJlJSa/tHhwqCyApFCOi3iqmlSMYYY1/DaCsz8+TCdrcS3uoZvQYg6Ysf
# ALVCbzEIYhvTi5NYhdcDn/QrmBtNF8HGdBOklXNfg+RjWyarReGHCE4CNT4FaUXE
# Ha2dm6fgIWzPcWB9IF1Nuj0+UhQiUc3L7lDADmI=
# SIG # End signature block