exports/ProxyCmdletDefinitions.ps1


# ----------------------------------------------------------------------------------
# Copyright (c) Microsoft Corporation. All rights reserved.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Code generated by Microsoft (R) AutoRest Code Generator.Changes may cause incorrect behavior and will be lost if the code
# is regenerated.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Returns the description for the specified hybrid connection.
.Description
Returns the description for the specified hybrid connection.
.Example
Get-AzRelayHybridConnection -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01
.Example
Get-AzRelayHybridConnection -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name connection-01 | Format-List
.Example
Get-AzRelayHybridConnection -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 | Get-AzRelayHybridConnection
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IHybridConnection
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IRelayIdentity>: Identity Parameter
  [AuthorizationRuleName <String>]: The authorization rule name.
  [HybridConnectionName <String>]: The hybrid connection name.
  [Id <String>]: Resource identity path
  [NamespaceName <String>]: The namespace name
  [PrivateEndpointConnectionName <String>]: The PrivateEndpointConnection name
  [PrivateLinkResourceName <String>]: The PrivateLinkResource name
  [RelayName <String>]: The relay name.
  [ResourceGroupName <String>]: Name of the Resource group within the Azure subscription.
  [SubscriptionId <String>]: Subscription credentials which uniquely identify the Microsoft Azure subscription. The subscription ID forms part of the URI for every service call.
.Link
https://learn.microsoft.com/powershell/module/az.relay/get-azrelayhybridconnection
#>

function Get-AzRelayHybridConnection {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IHybridConnection])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Alias('HybridConnectionName')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The hybrid connection name.
    ${Name},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.Relay.private\Get-AzRelayHybridConnection_Get';
            GetViaIdentity = 'Az.Relay.private\Get-AzRelayHybridConnection_GetViaIdentity';
            List = 'Az.Relay.private\Get-AzRelayHybridConnection_List';
        }
        if (('Get', 'List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Primary and secondary connection strings to the namespace.
.Description
Primary and secondary connection strings to the namespace.
.Example
Get-AzRelayKey -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name authRule-01
.Example
Get-AzRelayKey -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -HybridConnection connection-01 -Name authRule-01
.Example
Get-AzRelayKey -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -WcfRelay wcf-01 -Name authRule-01 | Format-List
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IAccessKeys
.Link
https://learn.microsoft.com/powershell/module/az.relay/get-azrelaykey
#>

function Get-AzRelayKey {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IAccessKeys])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The authorization rule name.
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='List1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The hybrid connection name.
    ${HybridConnection},

    [Parameter(ParameterSetName='List2', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The relay name.
    ${WcfRelay},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            List = 'Az.Relay.private\Get-AzRelayKey_List';
            List1 = 'Az.Relay.private\Get-AzRelayKey_List1';
            List2 = 'Az.Relay.private\Get-AzRelayKey_List2';
        }
        if (('List', 'List1', 'List2') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Gets NetworkRuleSet for a Namespace.
.Description
Gets NetworkRuleSet for a Namespace.
.Example
Get-AzRelayNamespaceNetworkRuleSet -ResourceGroupName lucas-relay-rg -NamespaceName namespace-pwsh01 | Format-List
.Example
$rules = @()
$rules += New-AzRelayNetworkRuleSetIPRuleObject -Action 'Allow' -IPMask "1.1.1.1"
$rules += New-AzRelayNetworkRuleSetIPRuleObject -Action 'Allow' -IPMask "1.1.1.2"
$rules += New-AzRelayNetworkRuleSetIPRuleObject -Action 'Allow' -IPMask "1.1.1.3"
Set-AzRelayNamespaceNetworkRuleSet -ResourceGroupName lucas-relay-rg -NamespaceName namespace-pwsh01 -DefaultAction 'Deny' -IPRule $rules | Get-AzRelayNamespaceNetworkRuleSet | Format-List
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.INetworkRuleSet
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IRelayIdentity>: Identity Parameter
  [AuthorizationRuleName <String>]: The authorization rule name.
  [HybridConnectionName <String>]: The hybrid connection name.
  [Id <String>]: Resource identity path
  [NamespaceName <String>]: The namespace name
  [PrivateEndpointConnectionName <String>]: The PrivateEndpointConnection name
  [PrivateLinkResourceName <String>]: The PrivateLinkResource name
  [RelayName <String>]: The relay name.
  [ResourceGroupName <String>]: Name of the Resource group within the Azure subscription.
  [SubscriptionId <String>]: Subscription credentials which uniquely identify the Microsoft Azure subscription. The subscription ID forms part of the URI for every service call.
.Link
https://learn.microsoft.com/powershell/module/az.relay/get-azrelaynamespacenetworkruleset
#>

function Get-AzRelayNamespaceNetworkRuleSet {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.INetworkRuleSet])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${NamespaceName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.Relay.private\Get-AzRelayNamespaceNetworkRuleSet_Get';
            GetViaIdentity = 'Az.Relay.private\Get-AzRelayNamespaceNetworkRuleSet_GetViaIdentity';
        }
        if (('Get') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Returns the description for the specified namespace.
.Description
Returns the description for the specified namespace.
.Example
Get-AzRelayNamespace -ResourceGroupName lucas-relay-rg
.Example
Get-AzRelayNamespace -ResourceGroupName lucas-relay-rg -Name namespace-pwsh01 | Format-List
.Example
$namespaces = Get-AzRelayNamespace -ResourceGroupName lucas-relay-rg
$namespaces[0] | Get-AzRelayNamespace
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IRelayNamespace
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IRelayIdentity>: Identity Parameter
  [AuthorizationRuleName <String>]: The authorization rule name.
  [HybridConnectionName <String>]: The hybrid connection name.
  [Id <String>]: Resource identity path
  [NamespaceName <String>]: The namespace name
  [PrivateEndpointConnectionName <String>]: The PrivateEndpointConnection name
  [PrivateLinkResourceName <String>]: The PrivateLinkResource name
  [RelayName <String>]: The relay name.
  [ResourceGroupName <String>]: Name of the Resource group within the Azure subscription.
  [SubscriptionId <String>]: Subscription credentials which uniquely identify the Microsoft Azure subscription. The subscription ID forms part of the URI for every service call.
.Link
https://learn.microsoft.com/powershell/module/az.relay/get-azrelaynamespace
#>

function Get-AzRelayNamespace {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IRelayNamespace])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Alias('NamespaceName')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Name},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Parameter(ParameterSetName='List1')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.Relay.private\Get-AzRelayNamespace_Get';
            GetViaIdentity = 'Az.Relay.private\Get-AzRelayNamespace_GetViaIdentity';
            List = 'Az.Relay.private\Get-AzRelayNamespace_List';
            List1 = 'Az.Relay.private\Get-AzRelayNamespace_List1';
        }
        if (('Get', 'List', 'List1') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Returns the description for the specified WCF relay.
.Description
Returns the description for the specified WCF relay.
.Example
Get-AzWcfRelay -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01
.Example
Get-AzWcfRelay -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name wcf-02 | Format-List
.Example
Get-AzWcfRelay -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 | Get-AzWcfRelay
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IWcfRelay
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IRelayIdentity>: Identity Parameter
  [AuthorizationRuleName <String>]: The authorization rule name.
  [HybridConnectionName <String>]: The hybrid connection name.
  [Id <String>]: Resource identity path
  [NamespaceName <String>]: The namespace name
  [PrivateEndpointConnectionName <String>]: The PrivateEndpointConnection name
  [PrivateLinkResourceName <String>]: The PrivateLinkResource name
  [RelayName <String>]: The relay name.
  [ResourceGroupName <String>]: Name of the Resource group within the Azure subscription.
  [SubscriptionId <String>]: Subscription credentials which uniquely identify the Microsoft Azure subscription. The subscription ID forms part of the URI for every service call.
.Link
https://learn.microsoft.com/powershell/module/az.relay/get-azwcfrelay
#>

function Get-AzWcfRelay {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IWcfRelay])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The relay name.
    ${Name},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='GetViaIdentity')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.Relay.private\Get-AzWcfRelay_Get';
            GetViaIdentity = 'Az.Relay.private\Get-AzWcfRelay_GetViaIdentity';
            List = 'Az.Relay.private\Get-AzWcfRelay_List';
        }
        if (('Get', 'List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Creates or updates an authorization rule for a namespace.
.Description
Creates or updates an authorization rule for a namespace.
.Example
New-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name authRule-03 -Rights 'Listen','Send'
.Example
New-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -HybridConnection connection-01 -Name authRule-01 -Rights 'Listen','Send' | Format-List
.Example
New-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -WcfRelay wcf-01 -Name authRule-01 -Rights 'Listen','Send' | Format-List
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IAuthorizationRule
.Link
https://learn.microsoft.com/powershell/module/az.relay/new-azrelayauthorizationrule
#>

function New-AzRelayAuthorizationRule {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IAuthorizationRule])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Alias('AuthorizationRuleName')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The authorization rule name.
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='CreateExpanded1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The hybrid connection name.
    ${HybridConnection},

    [Parameter(ParameterSetName='CreateExpanded2', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The relay name.
    ${WcfRelay},

    [Parameter()]
    [AllowEmptyCollection()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.AccessRights])]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.AccessRights[]]
    # The rights associated with the rule.
    ${Rights},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CreateExpanded = 'Az.Relay.private\New-AzRelayAuthorizationRule_CreateExpanded';
            CreateExpanded1 = 'Az.Relay.private\New-AzRelayAuthorizationRule_CreateExpanded1';
            CreateExpanded2 = 'Az.Relay.private\New-AzRelayAuthorizationRule_CreateExpanded2';
        }
        if (('CreateExpanded', 'CreateExpanded1', 'CreateExpanded2') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Creates or updates a service hybrid connection.
This operation is idempotent.
.Description
Creates or updates a service hybrid connection.
This operation is idempotent.
.Example
New-AzRelayHybridConnection -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name connection-01 -UserMetadata "test 01" | Format-List
.Example
$connection = Get-AzRelayHybridConnection -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name connection-01
$connection.RequiresClientAuthorization = $false
New-AzRelayHybridConnection -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name connection-02 -InputObject $connection | Format-List
.Example
$connection = Get-AzRelayHybridConnection -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name connection-02
$connection.UserMetadata = "TestHybirdConnection2"
New-AzRelayHybridConnection -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name connection-02 -InputObject $connection | Format-List
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IHybridConnection
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IHybridConnection
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IHybridConnection>: Description of hybrid connection resource.
  [RequiresClientAuthorization <Boolean?>]: Returns true if client authorization is needed for this hybrid connection; otherwise, false.
  [SystemDataCreatedAt <DateTime?>]: The timestamp of resource creation (UTC).
  [SystemDataCreatedBy <String>]: The identity that created the resource.
  [SystemDataCreatedByType <CreatedByType?>]: The type of identity that created the resource.
  [SystemDataLastModifiedAt <DateTime?>]: The timestamp of resource last modification (UTC)
  [SystemDataLastModifiedBy <String>]: The identity that last modified the resource.
  [SystemDataLastModifiedByType <CreatedByType?>]: The type of identity that last modified the resource.
  [UserMetadata <String>]: The usermetadata is a placeholder to store user-defined string data for the hybrid connection endpoint. For example, it can be used to store descriptive data, such as a list of teams and their contact information. Also, user-defined configuration settings can be stored.
.Link
https://learn.microsoft.com/powershell/module/az.relay/new-azrelayhybridconnection
#>

function New-AzRelayHybridConnection {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IHybridConnection])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Alias('HybridConnectionName')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The hybrid connection name.
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='Create', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IHybridConnection]
    # Description of hybrid connection resource.
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Returns true if client authorization is needed for this hybrid connection; otherwise, false.
    ${RequiresClientAuthorization},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [System.String]
    # The usermetadata is a placeholder to store user-defined string data for the hybrid connection endpoint.
    # For example, it can be used to store descriptive data, such as a list of teams and their contact information.
    # Also, user-defined configuration settings can be stored.
    ${UserMetadata},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Create = 'Az.Relay.private\New-AzRelayHybridConnection_Create';
            CreateExpanded = 'Az.Relay.private\New-AzRelayHybridConnection_CreateExpanded';
        }
        if (('Create', 'CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Regenerates the primary or secondary connection strings to the namespace.
.Description
Regenerates the primary or secondary connection strings to the namespace.
.Example
New-AzRelayKey -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name authRule-01 -RegenerateKey 'PrimaryKey'
.Example
New-AzRelayKey -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -HybridConnection connection-01 -Name authRule-01 -RegenerateKey 'PrimaryKey'
.Example
New-AzRelayKey -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -WcfRelay wcf-01 -Name authRule-01 -RegenerateKey 'PrimaryKey'
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IAccessKeys
.Link
https://learn.microsoft.com/powershell/module/az.relay/new-azrelaykey
#>

function New-AzRelayKey {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IAccessKeys])]
[CmdletBinding(DefaultParameterSetName='RegenerateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The authorization rule name.
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='RegenerateExpanded1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The hybrid connection name.
    ${HybridConnection},

    [Parameter(ParameterSetName='RegenerateExpanded2', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The relay name.
    ${WcfRelay},

    [Parameter(Mandatory)]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.KeyType])]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.KeyType]
    # The access key to regenerate.
    ${RegenerateKey},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [System.String]
    # Optional.
    # If the key value is provided, this is set to key type, or autogenerated key value set for key type.
    ${KeyValue},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            RegenerateExpanded = 'Az.Relay.private\New-AzRelayKey_RegenerateExpanded';
            RegenerateExpanded1 = 'Az.Relay.private\New-AzRelayKey_RegenerateExpanded1';
            RegenerateExpanded2 = 'Az.Relay.private\New-AzRelayKey_RegenerateExpanded2';
        }
        if (('RegenerateExpanded', 'RegenerateExpanded1', 'RegenerateExpanded2') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Create Azure Relay namespace.
.Description
Create Azure Relay namespace.
.Example
New-AzRelayNamespace -ResourceGroupName lucas-relay-rg -Name namespace-pwsh01 -Location eastus
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IRelayNamespace
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
PRIVATEENDPOINTCONNECTION <IPrivateEndpointConnection[]>: List of private endpoint connections.
  [PrivateEndpointId <String>]: The ARM identifier for Private Endpoint.
  [PrivateLinkServiceConnectionStateDescription <String>]: Description of the connection state.
  [PrivateLinkServiceConnectionStateStatus <PrivateLinkConnectionStatus?>]: Status of the connection.
  [ProvisioningState <EndPointProvisioningState?>]: Provisioning state of the Private Endpoint Connection.
  [SystemDataCreatedAt <DateTime?>]: The timestamp of resource creation (UTC).
  [SystemDataCreatedBy <String>]: The identity that created the resource.
  [SystemDataCreatedByType <CreatedByType?>]: The type of identity that created the resource.
  [SystemDataLastModifiedAt <DateTime?>]: The timestamp of resource last modification (UTC)
  [SystemDataLastModifiedBy <String>]: The identity that last modified the resource.
  [SystemDataLastModifiedByType <CreatedByType?>]: The type of identity that last modified the resource.
.Link
https://learn.microsoft.com/powershell/module/az.relay/new-azrelaynamespace
#>

function New-AzRelayNamespace {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IRelayNamespace])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Alias('NamespaceName')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [System.String]
    # Resource location.
    ${Location},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.SkuTier])]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.SkuTier]
    # The tier of this SKU.
    ${SkuTier},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20170401.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CreateExpanded = 'Az.Relay.private\New-AzRelayNamespace_CreateExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Creates or updates a WCF relay.
This operation is idempotent.
.Description
Creates or updates a WCF relay.
This operation is idempotent.
.Example
New-AzWcfRelay -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name wcf-02 -WcfRelayType 'NetTcp' -UserMetadata "test 01"
.Example
$wcf = Get-AzWcfRelay -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name wcf-02
$wcf.UserMetadata = "User Date"
New-AzWcfRelay -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name wcf-03 -InputObject $wcf
.Example
$wcf = Get-AzWcfRelay -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name wcf-02
$wcf.UserMetadata = "User Date"
New-AzWcfRelay -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name wcf-02 -InputObject $wcf
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IWcfRelay
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IWcfRelay
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IWcfRelay>: Description of the WCF relay resource.
  [RelayType <Relaytype?>]: WCF relay type.
  [RequiresClientAuthorization <Boolean?>]: Returns true if client authorization is needed for this relay; otherwise, false.
  [RequiresTransportSecurity <Boolean?>]: Returns true if transport security is needed for this relay; otherwise, false.
  [SystemDataCreatedAt <DateTime?>]: The timestamp of resource creation (UTC).
  [SystemDataCreatedBy <String>]: The identity that created the resource.
  [SystemDataCreatedByType <CreatedByType?>]: The type of identity that created the resource.
  [SystemDataLastModifiedAt <DateTime?>]: The timestamp of resource last modification (UTC)
  [SystemDataLastModifiedBy <String>]: The identity that last modified the resource.
  [SystemDataLastModifiedByType <CreatedByType?>]: The type of identity that last modified the resource.
  [UserMetadata <String>]: The usermetadata is a placeholder to store user-defined string data for the WCF Relay endpoint. For example, it can be used to store descriptive data, such as list of teams and their contact information. Also, user-defined configuration settings can be stored.
.Link
https://learn.microsoft.com/powershell/module/az.relay/new-azwcfrelay
#>

function New-AzWcfRelay {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IWcfRelay])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The relay name.
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='Create', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IWcfRelay]
    # Description of the WCF relay resource.
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Returns true if client authorization is needed for this relay; otherwise, false.
    ${RequiresClientAuthorization},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Returns true if transport security is needed for this relay; otherwise, false.
    ${RequiresTransportSecurity},

    [Parameter(ParameterSetName='CreateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [System.String]
    # The usermetadata is a placeholder to store user-defined string data for the WCF Relay endpoint.
    # For example, it can be used to store descriptive data, such as list of teams and their contact information.
    # Also, user-defined configuration settings can be stored.
    ${UserMetadata},

    [Parameter(ParameterSetName='CreateExpanded')]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.Relaytype])]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.Relaytype]
    # WCF relay type.
    ${WcfRelayType},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Create = 'Az.Relay.private\New-AzWcfRelay_Create';
            CreateExpanded = 'Az.Relay.private\New-AzWcfRelay_CreateExpanded';
        }
        if (('Create', 'CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Deletes a hybrid connection.
.Description
Deletes a hybrid connection.
.Example
Remove-AzRelayHybridConnection -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name connection-01
.Example
Get-AzRelayHybridConnection -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name connection-01 | Remove-AzRelayHybridConnection
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IRelayIdentity>: Identity Parameter
  [AuthorizationRuleName <String>]: The authorization rule name.
  [HybridConnectionName <String>]: The hybrid connection name.
  [Id <String>]: Resource identity path
  [NamespaceName <String>]: The namespace name
  [PrivateEndpointConnectionName <String>]: The PrivateEndpointConnection name
  [PrivateLinkResourceName <String>]: The PrivateLinkResource name
  [RelayName <String>]: The relay name.
  [ResourceGroupName <String>]: Name of the Resource group within the Azure subscription.
  [SubscriptionId <String>]: Subscription credentials which uniquely identify the Microsoft Azure subscription. The subscription ID forms part of the URI for every service call.
.Link
https://learn.microsoft.com/powershell/module/az.relay/remove-azrelayhybridconnection
#>

function Remove-AzRelayHybridConnection {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Alias('HybridConnectionName')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The hybrid connection name.
    ${Name},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.Relay.private\Remove-AzRelayHybridConnection_Delete';
            DeleteViaIdentity = 'Az.Relay.private\Remove-AzRelayHybridConnection_DeleteViaIdentity';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Deletes an existing namespace.
This operation also removes all associated resources under the namespace.
.Description
Deletes an existing namespace.
This operation also removes all associated resources under the namespace.
.Example
Remove-AzRelayNamespace -ResourceGroupName lucas-relay-rg -Name namespace-pwsh01
.Example
Get-AzRelayNamespace -ResourceGroupName lucas-relay-rg -Name namespace-pwsh01 | Remove-AzRelayNamespace
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IRelayIdentity>: Identity Parameter
  [AuthorizationRuleName <String>]: The authorization rule name.
  [HybridConnectionName <String>]: The hybrid connection name.
  [Id <String>]: Resource identity path
  [NamespaceName <String>]: The namespace name
  [PrivateEndpointConnectionName <String>]: The PrivateEndpointConnection name
  [PrivateLinkResourceName <String>]: The PrivateLinkResource name
  [RelayName <String>]: The relay name.
  [ResourceGroupName <String>]: Name of the Resource group within the Azure subscription.
  [SubscriptionId <String>]: Subscription credentials which uniquely identify the Microsoft Azure subscription. The subscription ID forms part of the URI for every service call.
.Link
https://learn.microsoft.com/powershell/module/az.relay/remove-azrelaynamespace
#>

function Remove-AzRelayNamespace {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Alias('NamespaceName')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Name},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.Relay.private\Remove-AzRelayNamespace_Delete';
            DeleteViaIdentity = 'Az.Relay.private\Remove-AzRelayNamespace_DeleteViaIdentity';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Deletes a WCF relay.
.Description
Deletes a WCF relay.
.Example
Remove-AzWcfRelay -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name wcf-02
.Example
Get-AzWcfRelay -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name wcf-03 | Remove-AzWcfRelay
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IRelayIdentity>: Identity Parameter
  [AuthorizationRuleName <String>]: The authorization rule name.
  [HybridConnectionName <String>]: The hybrid connection name.
  [Id <String>]: Resource identity path
  [NamespaceName <String>]: The namespace name
  [PrivateEndpointConnectionName <String>]: The PrivateEndpointConnection name
  [PrivateLinkResourceName <String>]: The PrivateLinkResource name
  [RelayName <String>]: The relay name.
  [ResourceGroupName <String>]: Name of the Resource group within the Azure subscription.
  [SubscriptionId <String>]: Subscription credentials which uniquely identify the Microsoft Azure subscription. The subscription ID forms part of the URI for every service call.
.Link
https://learn.microsoft.com/powershell/module/az.relay/remove-azwcfrelay
#>

function Remove-AzWcfRelay {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The relay name.
    ${Name},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.Relay.private\Remove-AzWcfRelay_Delete';
            DeleteViaIdentity = 'Az.Relay.private\Remove-AzWcfRelay_DeleteViaIdentity';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Check the specified namespace name availability.
.Description
Check the specified namespace name availability.
.Example
Test-AzRelayName -Namespace 'relaynamespace-01'
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.ICheckNameAvailabilityResult
.Link
https://learn.microsoft.com/powershell/module/az.relay/test-azrelayname
#>

function Test-AzRelayName {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.ICheckNameAvailabilityResult])]
[CmdletBinding(DefaultParameterSetName='CheckExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [System.String]
    # The namespace name to check for availability.
    # The namespace name can contain only letters, numbers, and hyphens.
    # The namespace must start with a letter, and it must end with a letter or number.
    ${Namespace},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CheckExpanded = 'Az.Relay.private\Test-AzRelayName_CheckExpanded';
        }
        if (('CheckExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Creates or updates a namespace.
Once created, this namespace's resource manifest is immutable.
This operation is idempotent.
.Description
Creates or updates a namespace.
Once created, this namespace's resource manifest is immutable.
This operation is idempotent.
.Example
Update-AzRelayNamespace -ResourceGroupName lucas-relay-rg -Name namespace-pwsh01 -Tag @{'k'='v'}
.Example
Get-AzRelayNamespace -ResourceGroupName lucas-relay-rg -Name namespace-pwsh01 | Update-AzRelayNamespace -Tag @{'k'='v'}
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IRelayNamespace
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IRelayIdentity>: Identity Parameter
  [AuthorizationRuleName <String>]: The authorization rule name.
  [HybridConnectionName <String>]: The hybrid connection name.
  [Id <String>]: Resource identity path
  [NamespaceName <String>]: The namespace name
  [PrivateEndpointConnectionName <String>]: The PrivateEndpointConnection name
  [PrivateLinkResourceName <String>]: The PrivateLinkResource name
  [RelayName <String>]: The relay name.
  [ResourceGroupName <String>]: Name of the Resource group within the Azure subscription.
  [SubscriptionId <String>]: Subscription credentials which uniquely identify the Microsoft Azure subscription. The subscription ID forms part of the URI for every service call.
 
PRIVATEENDPOINTCONNECTION <IPrivateEndpointConnection[]>: List of private endpoint connections.
  [PrivateEndpointId <String>]: The ARM identifier for Private Endpoint.
  [PrivateLinkServiceConnectionStateDescription <String>]: Description of the connection state.
  [PrivateLinkServiceConnectionStateStatus <PrivateLinkConnectionStatus?>]: Status of the connection.
  [ProvisioningState <EndPointProvisioningState?>]: Provisioning state of the Private Endpoint Connection.
  [SystemDataCreatedAt <DateTime?>]: The timestamp of resource creation (UTC).
  [SystemDataCreatedBy <String>]: The identity that created the resource.
  [SystemDataCreatedByType <CreatedByType?>]: The type of identity that created the resource.
  [SystemDataLastModifiedAt <DateTime?>]: The timestamp of resource last modification (UTC)
  [SystemDataLastModifiedBy <String>]: The identity that last modified the resource.
  [SystemDataLastModifiedByType <CreatedByType?>]: The type of identity that last modified the resource.
.Link
https://learn.microsoft.com/powershell/module/az.relay/update-azrelaynamespace
#>

function Update-AzRelayNamespace {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IRelayNamespace])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Alias('NamespaceName')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Name},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IResourceNamespacePatchTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            UpdateExpanded = 'Az.Relay.private\Update-AzRelayNamespace_UpdateExpanded';
            UpdateViaIdentityExpanded = 'Az.Relay.private\Update-AzRelayNamespace_UpdateViaIdentityExpanded';
        }
        if (('UpdateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Authorization rule for a namespace by name.
.Description
Authorization rule for a namespace by name.
.Example
Get-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01
.Example
Get-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name authRule-03 | Format-List
.Example
Get-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -HybridConnection connection-01
.Example
Get-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -HybridConnection connection-01 -Name authRule-01 | Format-List
.Example
Get-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -WcfRelay wcf-01
.Example
Get-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -WcfRelay connection-01 -Name authRule-01 | Format-List
.Example
Get-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 | Get-AzRelayAuthorizationRule
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IAuthorizationRule
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IRelayIdentity>: Identity Parameter
  [AuthorizationRuleName <String>]: The authorization rule name.
  [HybridConnectionName <String>]: The hybrid connection name.
  [Id <String>]: Resource identity path
  [NamespaceName <String>]: The namespace name
  [PrivateEndpointConnectionName <String>]: The PrivateEndpointConnection name
  [PrivateLinkResourceName <String>]: The PrivateLinkResource name
  [RelayName <String>]: The relay name.
  [ResourceGroupName <String>]: Name of the Resource group within the Azure subscription.
  [SubscriptionId <String>]: Subscription credentials which uniquely identify the Microsoft Azure subscription. The subscription ID forms part of the URI for every service call.
.Link
https://learn.microsoft.com/powershell/module/az.relay/get-azrelayauthorizationrule
#>

function Get-AzRelayAuthorizationRule {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IAuthorizationRule])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='List', Mandatory)]
    [Parameter(ParameterSetName='Get2', Mandatory)]
    [Parameter(ParameterSetName='Get1', Mandatory)]
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List2', Mandatory)]
    [Parameter(ParameterSetName='List1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(ParameterSetName='List', Mandatory)]
    [Parameter(ParameterSetName='Get2', Mandatory)]
    [Parameter(ParameterSetName='Get1', Mandatory)]
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List2', Mandatory)]
    [Parameter(ParameterSetName='List1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='List')]
    [Parameter(ParameterSetName='Get2')]
    [Parameter(ParameterSetName='Get1')]
    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List2')]
    [Parameter(ParameterSetName='List1')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='Get2', Mandatory)]
    [Parameter(ParameterSetName='Get1', Mandatory)]
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Alias('AuthorizationRuleName')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The authorization rule name.
    ${Name},

    [Parameter(ParameterSetName='Get2', Mandatory)]
    [Parameter(ParameterSetName='List2', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The relay name.
    ${WcfRelay},

    [Parameter(ParameterSetName='Get1', Mandatory)]
    [Parameter(ParameterSetName='List1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The hybrid connection name.
    ${HybridConnection},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The credentials, account, tenant, and subscription used for communication with Azure.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            List = 'Az.Relay.custom\Get-AzRelayAuthorizationRule';
            Get2 = 'Az.Relay.custom\Get-AzRelayAuthorizationRule';
            Get1 = 'Az.Relay.custom\Get-AzRelayAuthorizationRule';
            Get = 'Az.Relay.custom\Get-AzRelayAuthorizationRule';
            List2 = 'Az.Relay.custom\Get-AzRelayAuthorizationRule';
            List1 = 'Az.Relay.custom\Get-AzRelayAuthorizationRule';
            GetViaIdentity = 'Az.Relay.custom\Get-AzRelayAuthorizationRule';
        }
        if (('List', 'Get2', 'Get1', 'Get', 'List2', 'List1') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Create an in-memory object for NwRuleSetIPRules.
.Description
Create an in-memory object for NwRuleSetIPRules.
.Example
$rules = @()
$rules += New-AzRelayNetworkRuleSetIPRuleObject -Action 'Allow' -IPMask "1.1.1.1"
$rules += New-AzRelayNetworkRuleSetIPRuleObject -Action 'Allow' -IPMask "1.1.1.2"
$rules += New-AzRelayNetworkRuleSetIPRuleObject -Action 'Allow' -IPMask "1.1.1.3"
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.NwRuleSetIPRules
.Link
https://learn.microsoft.com/powershell/module/az.Relay/new-AzRelayNetworkRuleSetIPRuleObject
#>

function New-AzRelayNetworkRuleSetIPRuleObject {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.NwRuleSetIPRules])]
[CmdletBinding(PositionalBinding=$false)]
param(
    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.NetworkRuleIPAction])]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.NetworkRuleIPAction]
    # The IP Filter Action.
    ${Action},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [System.String]
    # IP Mask.
    ${IPMask}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            __AllParameterSets = 'Az.Relay.custom\New-AzRelayNetworkRuleSetIPRuleObject';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Deletes a namespace authorization rule.
.Description
Deletes a namespace authorization rule.
.Example
Remove-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -Name authRule-03
.Example
Remove-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -HybridConnection connection-01 -Name authRule-01
.Example
Remove-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -WcfRelay wcf-02 -Name authRule-01
.Example
Get-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -WcfRelay wcf-02 | Remove-AzRelayAuthorizationRule
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IRelayIdentity>: Identity Parameter
  [AuthorizationRuleName <String>]: The authorization rule name.
  [HybridConnectionName <String>]: The hybrid connection name.
  [Id <String>]: Resource identity path
  [NamespaceName <String>]: The namespace name
  [PrivateEndpointConnectionName <String>]: The PrivateEndpointConnection name
  [PrivateLinkResourceName <String>]: The PrivateLinkResource name
  [RelayName <String>]: The relay name.
  [ResourceGroupName <String>]: Name of the Resource group within the Azure subscription.
  [SubscriptionId <String>]: Subscription credentials which uniquely identify the Microsoft Azure subscription. The subscription ID forms part of the URI for every service call.
.Link
https://learn.microsoft.com/powershell/module/az.relay/remove-azrelayauthorizationrule
#>

function Remove-AzRelayAuthorizationRule {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Parameter(ParameterSetName='Delete2', Mandatory)]
    [Parameter(ParameterSetName='Delete1', Mandatory)]
    [Alias('AuthorizationRuleName')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The authorization rule name.
    ${Name},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Parameter(ParameterSetName='Delete2', Mandatory)]
    [Parameter(ParameterSetName='Delete1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Parameter(ParameterSetName='Delete2', Mandatory)]
    [Parameter(ParameterSetName='Delete1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Parameter(ParameterSetName='Delete2')]
    [Parameter(ParameterSetName='Delete1')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='Delete2', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The relay name.
    ${WcfRelay},

    [Parameter(ParameterSetName='Delete1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The hybrid connection name.
    ${HybridConnection},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The credentials, account, tenant, and subscription used for communication with Azure.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.Relay.custom\Remove-AzRelayAuthorizationRule';
            Delete2 = 'Az.Relay.custom\Remove-AzRelayAuthorizationRule';
            Delete1 = 'Az.Relay.custom\Remove-AzRelayAuthorizationRule';
            DeleteViaIdentity = 'Az.Relay.custom\Remove-AzRelayAuthorizationRule';
        }
        if (('Delete', 'Delete2', 'Delete1') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Creates or updates an authorization rule for a namespace.
.Description
Creates or updates an authorization rule for a namespace.
.Example
Set-AzRelayAuthorizationRule -ResourceGroupName Relay-ServiceBus-EastUS -Namespace namespace-pwsh01 -Name authRule-01 -Rights 'Listen' | Format-List
.Example
$authRule = Get-AzRelayAuthorizationRule -ResourceGroupName Relay-ServiceBus-EastUS -Namespace namespace-pwsh01 -Name authRule-01
$authRule.Rights += 'Send'
Set-AzRelayAuthorizationRule -ResourceGroupName Relay-ServiceBus-EastUS -Namespace namespace-pwsh01 -Name authRule-01 -InputObject $authRule | Format-List
.Example
Set-AzRelayAuthorizationRule -ResourceGroupName Relay-ServiceBus-EastUS -Namespace namespace-pwsh01 -HybridConnection connection-01 -Name authRule-02 -Rights 'Listen' | Format-List
.Example
$authRule = Get-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -HybridConnection connection-01 -Name authRule-01
$authRule.Rights += 'Send'
Set-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -HybridConnection connection-01 -Name authRule-01 -InputObject $authRule | Format-List
.Example
Set-AzRelayAuthorizationRule -ResourceGroupName Relay-ServiceBus-EastUS -Namespace namespace-pwsh01 -WcfRelay wcfrelay-01 -Name authRule-03 -Rights 'Listen' | Format-List
.Example
$authRule = Get-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -WcfRelay wcf-01 -Name authRule-01
$authRule.Rights += 'Send'
Set-AzRelayAuthorizationRule -ResourceGroupName lucas-relay-rg -Namespace namespace-pwsh01 -WcfRelay wcf-01 -Name authRule-01 -InputObject $authRule | Format-List
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IAuthorizationRule
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IAuthorizationRule
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IAuthorizationRule>: Single item in a List or Get AuthorizationRule operation
  [Rights <AccessRights[]>]: The rights associated with the rule.
  [SystemDataCreatedAt <DateTime?>]: The timestamp of resource creation (UTC).
  [SystemDataCreatedBy <String>]: The identity that created the resource.
  [SystemDataCreatedByType <CreatedByType?>]: The type of identity that created the resource.
  [SystemDataLastModifiedAt <DateTime?>]: The timestamp of resource last modification (UTC)
  [SystemDataLastModifiedBy <String>]: The identity that last modified the resource.
  [SystemDataLastModifiedByType <CreatedByType?>]: The type of identity that last modified the resource.
.Link
https://learn.microsoft.com/powershell/module/az.relay/set-azrelayauthorizationrule
#>

function Set-AzRelayAuthorizationRule {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IAuthorizationRule])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Alias('AuthorizationRuleName')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The authorization rule name.
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateExpanded1', Mandatory)]
    [Parameter(ParameterSetName='Update1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The hybrid connection name.
    ${HybridConnection},

    [Parameter(ParameterSetName='UpdateExpanded2', Mandatory)]
    [Parameter(ParameterSetName='Update2', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The relay name.
    ${WcfRelay},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Parameter(ParameterSetName='UpdateExpanded1')]
    [Parameter(ParameterSetName='UpdateExpanded2')]
    [AllowEmptyCollection()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.AccessRights])]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.AccessRights[]]
    # The rights associated with the rule.
    ${Rights},

    [Parameter(ParameterSetName='Update1', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='Update2', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='Update', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IAuthorizationRule]
    # Single item in a List or Get AuthorizationRule operation
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            UpdateExpanded = 'Az.Relay.custom\Set-AzRelayAuthorizationRule';
            UpdateExpanded1 = 'Az.Relay.custom\Set-AzRelayAuthorizationRule';
            Update1 = 'Az.Relay.custom\Set-AzRelayAuthorizationRule';
            UpdateExpanded2 = 'Az.Relay.custom\Set-AzRelayAuthorizationRule';
            Update2 = 'Az.Relay.custom\Set-AzRelayAuthorizationRule';
            Update = 'Az.Relay.custom\Set-AzRelayAuthorizationRule';
        }
        if (('UpdateExpanded', 'UpdateExpanded1', 'Update1', 'UpdateExpanded2', 'Update2', 'Update') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Creates or updates a service hybrid connection.
This operation is idempotent.
.Description
Creates or updates a service hybrid connection.
This operation is idempotent.
.Example
Set-AzRelayHybridConnection -ResourceGroupName Relay-ServiceBus-EastUS -Namespace namespace-pwsh01 -Name connection-01 -UserMetadata "Update UserMetaData" | Format-List
.Example
$connection = Get-AzRelayHybridConnection -ResourceGroupName Relay-ServiceBus-EastUS -Namespace namespace-pwsh01 -Name connection-01
$connection.UserMetadata = "testHybirdConnection"
Set-AzRelayHybridConnection -ResourceGroupName Relay-ServiceBus-EastUS -Namespace namespace-pwsh01 -Name connection-01 -InputObject $connection | Format-List
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IHybridConnection
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IHybridConnection
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IHybridConnection>: Description of hybrid connection resource.
  [RequiresClientAuthorization <Boolean?>]: Returns true if client authorization is needed for this hybrid connection; otherwise, false.
  [SystemDataCreatedAt <DateTime?>]: The timestamp of resource creation (UTC).
  [SystemDataCreatedBy <String>]: The identity that created the resource.
  [SystemDataCreatedByType <CreatedByType?>]: The type of identity that created the resource.
  [SystemDataLastModifiedAt <DateTime?>]: The timestamp of resource last modification (UTC)
  [SystemDataLastModifiedBy <String>]: The identity that last modified the resource.
  [SystemDataLastModifiedByType <CreatedByType?>]: The type of identity that last modified the resource.
  [UserMetadata <String>]: The usermetadata is a placeholder to store user-defined string data for the hybrid connection endpoint. For example, it can be used to store descriptive data, such as a list of teams and their contact information. Also, user-defined configuration settings can be stored.
.Link
https://learn.microsoft.com/powershell/module/az.relay/set-azrelayhybridconnection
#>

function Set-AzRelayHybridConnection {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IHybridConnection])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Alias('HybridConnectionName')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The hybrid connection name.
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [System.String]
    # The usermetadata is a placeholder to store user-defined string data for the hybrid connection endpoint.
    # For example, it can be used to store descriptive data, such as a list of teams and their contact information.
    # Also, user-defined configuration settings can be stored.
    ${UserMetadata},

    [Parameter(ParameterSetName='Update', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IHybridConnection]
    # Description of hybrid connection resource.
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            UpdateExpanded = 'Az.Relay.custom\Set-AzRelayHybridConnection';
            Update = 'Az.Relay.custom\Set-AzRelayHybridConnection';
        }
        if (('UpdateExpanded', 'Update') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Update NetworkRuleSet for a Namespace.
.Description
Update NetworkRuleSet for a Namespace.
.Example
$rules = @()
$rules += New-AzRelayNetworkRuleSetIPRuleObject -Action 'Allow' -IPMask "1.1.1.1"
$rules += New-AzRelayNetworkRuleSetIPRuleObject -Action 'Allow' -IPMask "1.1.1.2"
$rules += New-AzRelayNetworkRuleSetIPRuleObject -Action 'Allow' -IPMask "1.1.1.3"
Set-AzRelayNamespaceNetworkRuleSet -ResourceGroupName Relay-ServiceBus-EastUS -NamespaceName namespace-pwsh01 -DefaultAction 'Deny' -IPRule $rules | Format-List
.Example
$rules = @()
$rules += New-AzRelayNetworkRuleSetIPRuleObject -Action 'Allow' -IPMask "1.1.1.1"
$rules += New-AzRelayNetworkRuleSetIPRuleObject -Action 'Allow' -IPMask "1.1.1.2"
$rules += New-AzRelayNetworkRuleSetIPRuleObject -Action 'Allow' -IPMask "1.1.1.3"
Get-AzRelayNamespaceNetworkRuleSet -ResourceGroupName Relay-ServiceBus-EastUS -NamespaceName namespace-pwsh01 | Set-AzRelayNamespaceNetworkRuleSet -DefaultAction 'Deny' -IPRule $rules -PublicNetworkAccess 'Enabled' | Format-List
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.INetworkRuleSet
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IRelayIdentity>: Identity Parameter
  [AuthorizationRuleName <String>]: The authorization rule name.
  [HybridConnectionName <String>]: The hybrid connection name.
  [Id <String>]: Resource identity path
  [NamespaceName <String>]: The namespace name
  [PrivateEndpointConnectionName <String>]: The PrivateEndpointConnection name
  [PrivateLinkResourceName <String>]: The PrivateLinkResource name
  [RelayName <String>]: The relay name.
  [ResourceGroupName <String>]: Name of the Resource group within the Azure subscription.
  [SubscriptionId <String>]: Subscription credentials which uniquely identify the Microsoft Azure subscription. The subscription ID forms part of the URI for every service call.
 
IPRULE <INwRuleSetIPRules[]>: List of IpRules
  [Action <NetworkRuleIPAction?>]: The IP Filter Action
  [IPMask <String>]: IP Mask
.Link
https://learn.microsoft.com/powershell/module/az.relay/set-azrelaynamespacenetworkruleset
#>

function Set-AzRelayNamespaceNetworkRuleSet {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.INetworkRuleSet])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${NamespaceName},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.IRelayIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.DefaultAction])]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.DefaultAction]
    # Default Action for Network Rule Set
    ${DefaultAction},

    [Parameter()]
    [AllowEmptyCollection()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.INwRuleSetIPRules[]]
    # List of IpRules
    # To construct, see NOTES section for IPRULE properties and create a hash table.
    ${IPRule},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.PublicNetworkAccess])]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.PublicNetworkAccess]
    # This determines if traffic is allowed over public network.
    # By default it is enabled
    ${PublicNetworkAccess},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            UpdateExpanded = 'Az.Relay.custom\Set-AzRelayNamespaceNetworkRuleSet';
            UpdateViaIdentityExpanded = 'Az.Relay.custom\Set-AzRelayNamespaceNetworkRuleSet';
        }
        if (('UpdateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.Relay.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Creates or updates a WCF relay.
This operation is idempotent.
.Description
Creates or updates a WCF relay.
This operation is idempotent.
.Example
$wcf = Get-AzWcfRelay -ResourceGroupName Relay-ServiceBus-EastUS -Namespace namespace-pwsh01 -Name wcfRelay-01
$wcf.UserMetadata = "User Meta Data"
Set-AzWcfRelay -ResourceGroupName Relay-ServiceBus-EastUS -Namespace namespace-pwsh01 -Name wcfRelay-01 -InputObject $wcf | Format-List
.Example
Set-AzWcfRelay -ResourceGroupName Relay-ServiceBus-EastUS -Namespace namespace-pwsh01 -Name wcfRelay-01 -UserMetadata "usermetadata is a placeholder to store user-defined string data for the HybridConnection endpoint.e.g. it can be used to store descriptive data, such as list of teams and their contact information also user-defined configuration settings can be stored." | Format-List
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IWcfRelay
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IWcfRelay
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IWcfRelay>: Description of the WCF relay resource.
  [RelayType <Relaytype?>]: WCF relay type.
  [RequiresClientAuthorization <Boolean?>]: Returns true if client authorization is needed for this relay; otherwise, false.
  [RequiresTransportSecurity <Boolean?>]: Returns true if transport security is needed for this relay; otherwise, false.
  [SystemDataCreatedAt <DateTime?>]: The timestamp of resource creation (UTC).
  [SystemDataCreatedBy <String>]: The identity that created the resource.
  [SystemDataCreatedByType <CreatedByType?>]: The type of identity that created the resource.
  [SystemDataLastModifiedAt <DateTime?>]: The timestamp of resource last modification (UTC)
  [SystemDataLastModifiedBy <String>]: The identity that last modified the resource.
  [SystemDataLastModifiedByType <CreatedByType?>]: The type of identity that last modified the resource.
  [UserMetadata <String>]: The usermetadata is a placeholder to store user-defined string data for the WCF Relay endpoint. For example, it can be used to store descriptive data, such as list of teams and their contact information. Also, user-defined configuration settings can be stored.
.Link
https://learn.microsoft.com/powershell/module/az.relay/set-azwcfrelay
#>

function Set-AzWcfRelay {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IWcfRelay])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The relay name.
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # The namespace name
    ${Namespace},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [System.String]
    # Name of the Resource group within the Azure subscription.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # Subscription credentials which uniquely identify the Microsoft Azure subscription.
    # The subscription ID forms part of the URI for every service call.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [System.String]
    # The usermetadata is a placeholder to store user-defined string data for the WCF Relay endpoint.
    # For example, it can be used to store descriptive data, such as list of teams and their contact information.
    # Also, user-defined configuration settings can be stored.
    ${UserMetadata},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.Relaytype])]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Support.Relaytype]
    # WCF relay type.
    ${WcfRelayType},

    [Parameter(ParameterSetName='Update', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Models.Api20211101.IWcfRelay]
    # Description of the WCF relay resource.
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.Relay.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend}