exports/ProxyCmdletDefinitions.ps1


# ----------------------------------------------------------------------------------
# Copyright (c) Microsoft Corporation. All rights reserved.
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Code generated by Microsoft (R) AutoRest Code Generator.Changes may cause incorrect behavior and will be lost if the code
# is regenerated.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Get ArcSetting resource details of HCI Cluster.
.Description
Get ArcSetting resource details of HCI Cluster.
.Example
Get-AzStackHciArcSetting -ResourceGroupName test-rg -ClusterName myCluster
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.IArcSetting
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IStackHciIdentity>: Identity Parameter
  [ArcSettingName <String>]: The name of the proxy resource holding details of HCI ArcSetting information.
  [ClusterName <String>]: The name of the cluster.
  [ExtensionName <String>]: The name of the machine extension.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/get-azstackhciarcsetting
#>

function Get-AzStackHciArcSetting {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.IArcSetting])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the cluster.
    ${ClusterName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Alias('ArcSettingName')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the proxy resource holding details of HCI ArcSetting information.
    ${Name},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.StackHCI.private\Get-AzStackHciArcSetting_Get';
            GetViaIdentity = 'Az.StackHCI.private\Get-AzStackHciArcSetting_GetViaIdentity';
            List = 'Az.StackHCI.private\Get-AzStackHciArcSetting_List';
        }
        if (('Get', 'List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Get HCI cluster.
.Description
Get HCI cluster.
.Example
Get-AzStackHciCluster -ResourceGroupName test-rg
.Example
Get-AzStackHciCluster -ResourceGroupName test-rg -ClusterName myCluster
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.ICluster
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IStackHciIdentity>: Identity Parameter
  [ArcSettingName <String>]: The name of the proxy resource holding details of HCI ArcSetting information.
  [ClusterName <String>]: The name of the cluster.
  [ExtensionName <String>]: The name of the machine extension.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/get-azstackhcicluster
#>

function Get-AzStackHciCluster {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.ICluster])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Alias('ClusterName')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the cluster.
    ${Name},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List1', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Parameter(ParameterSetName='List1')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.StackHCI.private\Get-AzStackHciCluster_Get';
            GetViaIdentity = 'Az.StackHCI.private\Get-AzStackHciCluster_GetViaIdentity';
            List = 'Az.StackHCI.private\Get-AzStackHciCluster_List';
            List1 = 'Az.StackHCI.private\Get-AzStackHciCluster_List1';
        }
        if (('Get', 'List', 'List1') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Get particular Arc Extension of HCI Cluster.
.Description
Get particular Arc Extension of HCI Cluster.
.Example
Get-AzStackHciExtension -ResourceGroupName test-rg -ClusterName myCluster -ArcSettingName "default"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.IExtension
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IStackHciIdentity>: Identity Parameter
  [ArcSettingName <String>]: The name of the proxy resource holding details of HCI ArcSetting information.
  [ClusterName <String>]: The name of the cluster.
  [ExtensionName <String>]: The name of the machine extension.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/get-azstackhciextension
#>

function Get-AzStackHciExtension {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.IExtension])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the proxy resource holding details of HCI ArcSetting information.
    ${ArcSettingName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the cluster.
    ${ClusterName},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Alias('ExtensionName')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the machine extension.
    ${Name},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='List', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Get')]
    [Parameter(ParameterSetName='List')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String[]]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Get = 'Az.StackHCI.private\Get-AzStackHciExtension_Get';
            GetViaIdentity = 'Az.StackHCI.private\Get-AzStackHciExtension_GetViaIdentity';
            List = 'Az.StackHCI.private\Get-AzStackHciExtension_List';
        }
        if (('Get', 'List') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Add consent time for default extensions and initiate extensions installation
.Description
Add consent time for default extensions and initiate extensions installation
.Example
Invoke-AzStackHciConsentAndInstallDefaultExtension -ResourceGroupName "test-rg" -ClusterName "test-clus"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.IArcSetting
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IStackHciIdentity>: Identity Parameter
  [ArcSettingName <String>]: The name of the proxy resource holding details of HCI ArcSetting information.
  [ClusterName <String>]: The name of the cluster.
  [ExtensionName <String>]: The name of the machine extension.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/invoke-azstackhciconsentandinstalldefaultextension
#>

function Invoke-AzStackHciConsentAndInstallDefaultExtension {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.IArcSetting])]
[CmdletBinding(DefaultParameterSetName='And', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='And', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the cluster.
    ${ClusterName},

    [Parameter(ParameterSetName='And', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='And')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='AndViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            And = 'Az.StackHCI.private\Invoke-AzStackHciConsentAndInstallDefaultExtension_And';
            AndViaIdentity = 'Az.StackHCI.private\Invoke-AzStackHciConsentAndInstallDefaultExtension_AndViaIdentity';
        }
        if (('And') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('ArcSettingName')) {
            $PSBoundParameters['ArcSettingName'] = "default"
        }
        if (('And') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Extends Software Assurance Benefit to a cluster
.Description
Extends Software Assurance Benefit to a cluster
.Example
Invoke-AzStackHciExtendClusterSoftwareAssuranceBenefit -ClusterName "test-clus" -ResourceGroupName "test-rg"
.Example
Invoke-AzStackHciExtendClusterSoftwareAssuranceBenefit -ClusterName "test-clus" -ResourceGroupName "test-rg" -SoftwareAssuranceIntent "Disable"
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.ISoftwareAssuranceChangeRequest
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.ICluster
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IStackHciIdentity>: Identity Parameter
  [ArcSettingName <String>]: The name of the proxy resource holding details of HCI ArcSetting information.
  [ClusterName <String>]: The name of the cluster.
  [ExtensionName <String>]: The name of the machine extension.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription.
 
SOFTWAREASSURANCECHANGEREQUEST <ISoftwareAssuranceChangeRequest>: .
  [SoftwareAssuranceIntent <SoftwareAssuranceIntent?>]: Customer Intent for Software Assurance Benefit.
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/invoke-azstackhciextendclustersoftwareassurancebenefit
#>

function Invoke-AzStackHciExtendClusterSoftwareAssuranceBenefit {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.ICluster])]
[CmdletBinding(DefaultParameterSetName='ExtendExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Extend', Mandatory)]
    [Parameter(ParameterSetName='ExtendExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the cluster.
    ${ClusterName},

    [Parameter(ParameterSetName='Extend', Mandatory)]
    [Parameter(ParameterSetName='ExtendExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Extend')]
    [Parameter(ParameterSetName='ExtendExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='ExtendViaIdentity', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='ExtendViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(ParameterSetName='Extend', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='ExtendViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.ISoftwareAssuranceChangeRequest]
    # .
    # To construct, see NOTES section for SOFTWAREASSURANCECHANGEREQUEST properties and create a hash table.
    ${SoftwareAssuranceChangeRequest},

    [Parameter(ParameterSetName='ExtendExpanded')]
    [Parameter(ParameterSetName='ExtendViaIdentityExpanded')]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.SoftwareAssuranceIntent])]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.DefaultInfo(Script='"Enable"')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.SoftwareAssuranceIntent]
    # Customer Intent for Software Assurance Benefit.
    ${SoftwareAssuranceIntent},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Extend = 'Az.StackHCI.private\Invoke-AzStackHciExtendClusterSoftwareAssuranceBenefit_Extend';
            ExtendExpanded = 'Az.StackHCI.private\Invoke-AzStackHciExtendClusterSoftwareAssuranceBenefit_ExtendExpanded';
            ExtendViaIdentity = 'Az.StackHCI.private\Invoke-AzStackHciExtendClusterSoftwareAssuranceBenefit_ExtendViaIdentity';
            ExtendViaIdentityExpanded = 'Az.StackHCI.private\Invoke-AzStackHciExtendClusterSoftwareAssuranceBenefit_ExtendViaIdentityExpanded';
        }
        if (('Extend', 'ExtendExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        if (('ExtendExpanded', 'ExtendViaIdentityExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SoftwareAssuranceIntent')) {
            $PSBoundParameters['SoftwareAssuranceIntent'] = "Enable"
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Create ArcSetting for HCI cluster.
.Description
Create ArcSetting for HCI cluster.
.Example
New-AzStackHciArcSetting -ResourceGroupName "test-rg" -ClusterName "myCluster"
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.IArcSetting
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/new-azstackhciarcsetting
#>

function New-AzStackHciArcSetting {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.IArcSetting])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the cluster.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # App id of arc AAD identity.
    ${ArcApplicationClientId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Object id of arc AAD identity.
    ${ArcApplicationObjectId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Tenant id of arc AAD identity.
    ${ArcApplicationTenantId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # The resource group that hosts the Arc agents, ie.
    # Hybrid Compute Machine resources.
    ${ArcInstanceResourceGroup},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Object id of arc AAD service principal.
    ${ArcServicePrincipalObjectId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IAny]
    # contains connectivity related configuration for ARC resources
    ${ConnectivityProperty},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CreateExpanded = 'Az.StackHCI.private\New-AzStackHciArcSetting_CreateExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('Name')) {
            $PSBoundParameters['Name'] = "default"
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Create an HCI cluster.
.Description
Create an HCI cluster.
.Example
New-AzStackHciCluster -Name "myCluster" -ResourceGroupName "test-rg" -AadTenantId "c76bd4d1-bea3-45ea-be1b-4a745a675d07" -AadClientId "24a6e53d-04e5-44d2-b7cc-1b732a847dfc" -Location "eastus"
.Example
New-AzStackHciCluster -Name "myCluster2" -ResourceGroupName "test-rg" -AadTenantId "c76bd4d1-bea3-45ea-be1b-4a745a675d07" -AadClientId "24a6e53d-04e5-44d2-b7cc-1b732a847dfc" -Location "westeurope" -DesiredPropertyDiagnosticLevel "Off" -DesiredPropertyWindowsServerSubscription "Enabled"
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.ICluster
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/new-azstackhcicluster
#>

function New-AzStackHciCluster {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.ICluster])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Alias('ClusterName')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the cluster.
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # The geo-location where the resource lives
    ${Location},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Object id of cluster AAD identity.
    ${AadApplicationObjectId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # App id of cluster AAD identity.
    ${AadClientId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Id of cluster identity service principal.
    ${AadServicePrincipalObjectId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Tenant id of cluster AAD identity.
    ${AadTenantId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Endpoint configured for management from the Azure portal.
    ${CloudManagementEndpoint},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.DiagnosticLevel])]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.DiagnosticLevel]
    # Desired level of diagnostic data emitted by the cluster.
    ${DesiredPropertyDiagnosticLevel},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.WindowsServerSubscription])]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.WindowsServerSubscription]
    # Desired state of Windows Server Subscription.
    ${DesiredPropertyWindowsServerSubscription},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.ManagedServiceIdentityType])]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.ManagedServiceIdentityType]
    # Type of managed service identity (where both SystemAssigned and UserAssigned types are allowed).
    ${IdentityType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api40.IUserAssignedIdentities]))]
    [System.Collections.Hashtable]
    # The set of user assigned identities associated with the resource.
    # The userAssignedIdentities dictionary keys will be ARM resource ids in the form: '/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ManagedIdentity/userAssignedIdentities/{identityName}.
    # The dictionary values can be empty objects ({}) in requests.
    ${IdentityUserAssignedIdentity},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.SoftwareAssuranceIntent])]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.SoftwareAssuranceIntent]
    # Customer Intent for Software Assurance Benefit.
    ${SoftwareAssurancePropertySoftwareAssuranceIntent},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.SoftwareAssuranceStatus])]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.SoftwareAssuranceStatus]
    # Status of the Software Assurance for the cluster.
    ${SoftwareAssurancePropertySoftwareAssuranceStatus},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api30.ITrackedResourceTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CreateExpanded = 'Az.StackHCI.private\New-AzStackHciCluster_CreateExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Create Extension for HCI cluster.
.Description
Create Extension for HCI cluster.
.Example
New-AzStackHciExtension -ArcSettingName "default" -ClusterName "myCluster" -Name "MicrosoftMonitoringAgent" -ResourceGroupName test-rg
.Example
$Settings = @{ "commandToExecute" = "powershell.exe -c Get-Process" }
New-AzStackHciExtension -ArcSettingName "default" -ClusterName "myCluster" -Name "MicrosoftMonitoringAgent" -ResourceGroupName test-rg -ExtensionParameterPublisher "Microsoft.Compute" -ExtensionParameterType "MicrosoftMonitoringAgent" -ExtensionParameterProtectedSetting $Settings
 
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.IExtension
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/new-azstackhciextension
#>

function New-AzStackHciExtension {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.IExtension])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the proxy resource holding details of HCI ArcSetting information.
    ${ArcSettingName},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the cluster.
    ${ClusterName},

    [Parameter(Mandatory)]
    [Alias('ExtensionName')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the machine extension.
    ${Name},

    [Parameter(Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Indicates whether the extension should use a newer minor version if one is available at deployment time.
    # Once deployed, however, the extension will not upgrade minor versions unless redeployed, even with this property set to true.
    ${ExtensionParameterAutoUpgradeMinorVersion},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Indicates whether the extension should be automatically upgraded by the platform if there is a newer version available.
    ${ExtensionParameterEnableAutomaticUpgrade},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # How the extension handler should be forced to update even if the extension configuration has not changed.
    ${ExtensionParameterForceUpdateTag},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.IExtensionParametersProtectedSettings]))]
    [System.Collections.Hashtable]
    # Protected settings (may contain secrets).
    ${ExtensionParameterProtectedSetting},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # The name of the extension handler publisher.
    ${ExtensionParameterPublisher},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.IExtensionParametersSettings]))]
    [System.Collections.Hashtable]
    # Json formatted public settings for the extension.
    ${ExtensionParameterSetting},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the type of the extension; an example is "CustomScriptExtension".
    ${ExtensionParameterType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the version of the script handler.
    # Latest version would be used if not specified.
    ${ExtensionParameterTypeHandlerVersion},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            CreateExpanded = 'Az.StackHCI.private\New-AzStackHciExtension_CreateExpanded';
        }
        if (('CreateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Delete ArcSetting resource details of HCI Cluster.
.Description
Delete ArcSetting resource details of HCI Cluster.
.Example
Remove-AzStackHciArcSetting -ResourceGroupName test-rg -ClusterName myCluster -Name default
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IStackHciIdentity>: Identity Parameter
  [ArcSettingName <String>]: The name of the proxy resource holding details of HCI ArcSetting information.
  [ClusterName <String>]: The name of the cluster.
  [ExtensionName <String>]: The name of the machine extension.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/remove-azstackhciarcsetting
#>

function Remove-AzStackHciArcSetting {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the cluster.
    ${ClusterName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Alias('ArcSettingName')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the proxy resource holding details of HCI ArcSetting information.
    ${Name},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.StackHCI.private\Remove-AzStackHciArcSetting_Delete';
            DeleteViaIdentity = 'Az.StackHCI.private\Remove-AzStackHciArcSetting_DeleteViaIdentity';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Delete an HCI cluster.
.Description
Delete an HCI cluster.
.Example
Remove-AzStackHciCluster -ResourceGroupName test-rg -Name myCluster2
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IStackHciIdentity>: Identity Parameter
  [ArcSettingName <String>]: The name of the proxy resource holding details of HCI ArcSetting information.
  [ClusterName <String>]: The name of the cluster.
  [ExtensionName <String>]: The name of the machine extension.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/remove-azstackhcicluster
#>

function Remove-AzStackHciCluster {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Alias('ClusterName')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the cluster.
    ${Name},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.StackHCI.private\Remove-AzStackHciCluster_Delete';
            DeleteViaIdentity = 'Az.StackHCI.private\Remove-AzStackHciCluster_DeleteViaIdentity';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Delete particular Arc Extension of HCI Cluster.
.Description
Delete particular Arc Extension of HCI Cluster.
.Example
Remove-AzStackHciExtension -ResourceGroupName test-rg -ClusterName myCluster -ArcSettingName "default" -Name MicrosoftMonitoringAgent
.Example
Get-AzStackHciExtension -ResourceGroupName test-rg -ClusterName myCluster -ArcSettingName "default" | Remove-AzStackHciExtension
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IStackHciIdentity>: Identity Parameter
  [ArcSettingName <String>]: The name of the proxy resource holding details of HCI ArcSetting information.
  [ClusterName <String>]: The name of the cluster.
  [ExtensionName <String>]: The name of the machine extension.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/remove-azstackhciextension
#>

function Remove-AzStackHciExtension {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the proxy resource holding details of HCI ArcSetting information.
    ${ArcSettingName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the cluster.
    ${ClusterName},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Alias('ExtensionName')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the machine extension.
    ${Name},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='Delete')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command as a job
    ${AsJob},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Run the command asynchronously
    ${NoWait},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            Delete = 'Az.StackHCI.private\Remove-AzStackHciExtension_Delete';
            DeleteViaIdentity = 'Az.StackHCI.private\Remove-AzStackHciExtension_DeleteViaIdentity';
        }
        if (('Delete') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Update an HCI cluster.
.Description
Update an HCI cluster.
.Example
Update-AzStackHciCluster -ResourceGroupName test-rg -Name myCluster3 -DesiredPropertyDiagnosticLevel Enhanced -DesiredPropertyWindowsServerSubscription Disabled
 
.Inputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity
.Outputs
Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.ICluster
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IStackHciIdentity>: Identity Parameter
  [ArcSettingName <String>]: The name of the proxy resource holding details of HCI ArcSetting information.
  [ClusterName <String>]: The name of the cluster.
  [ExtensionName <String>]: The name of the machine extension.
  [Id <String>]: Resource identity path
  [ResourceGroupName <String>]: The name of the resource group. The name is case insensitive.
  [SubscriptionId <String>]: The ID of the target subscription.
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/update-azstackhcicluster
#>

function Update-AzStackHciCluster {
[OutputType([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.ICluster])]
[CmdletBinding(DefaultParameterSetName='UpdateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Alias('ClusterName')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the cluster.
    ${Name},

    [Parameter(ParameterSetName='UpdateExpanded', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [System.String]
    # The name of the resource group.
    # The name is case insensitive.
    ${ResourceGroupName},

    [Parameter(ParameterSetName='UpdateExpanded')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.DefaultInfo(Script='(Get-AzContext).Subscription.Id')]
    [System.String]
    # The ID of the target subscription.
    ${SubscriptionId},

    [Parameter(ParameterSetName='UpdateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Path')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.IStackHciIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Tenant id of cluster AAD identity.
    ${AadTenantId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Endpoint configured for management from the Azure portal
    ${CloudManagementEndpoint},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.DiagnosticLevel])]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.DiagnosticLevel]
    # Desired level of diagnostic data emitted by the cluster.
    ${DesiredPropertyDiagnosticLevel},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.WindowsServerSubscription])]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.WindowsServerSubscription]
    # Desired state of Windows Server Subscription.
    ${DesiredPropertyWindowsServerSubscription},

    [Parameter()]
    [ArgumentCompleter([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.ManagedServiceIdentityType])]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Support.ManagedServiceIdentityType]
    # Type of managed service identity (where both SystemAssigned and UserAssigned types are allowed).
    ${IdentityType},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api40.IUserAssignedIdentities]))]
    [System.Collections.Hashtable]
    # The set of user assigned identities associated with the resource.
    # The userAssignedIdentities dictionary keys will be ARM resource ids in the form: '/subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/Microsoft.ManagedIdentity/userAssignedIdentities/{identityName}.
    # The dictionary values can be empty objects ({}) in requests.
    ${IdentityUserAssignedIdentity},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.Info(PossibleTypes=([Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Models.Api20230301.IClusterPatchTags]))]
    [System.Collections.Hashtable]
    # Resource tags.
    ${Tag},

    [Parameter()]
    [Alias('AzureRMContext', 'AzureCredential')]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Azure')]
    [System.Management.Automation.PSObject]
    # The DefaultProfile parameter is not functional.
    # Use the SubscriptionId parameter when available if executing the cmdlet against a different subscription.
    ${DefaultProfile},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            UpdateExpanded = 'Az.StackHCI.private\Update-AzStackHciCluster_UpdateExpanded';
            UpdateViaIdentityExpanded = 'Az.StackHCI.private\Update-AzStackHciCluster_UpdateViaIdentityExpanded';
        }
        if (('UpdateExpanded') -contains $parameterSet -and -not $PSBoundParameters.ContainsKey('SubscriptionId')) {
            $PSBoundParameters['SubscriptionId'] = (Get-AzContext).Subscription.Id
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Add-AzStackHCIVMAttestation configures guests for AzureStack HCI IMDS Attestation.
.Description
Add-AzStackHCIVMAttestation configures guests for AzureStack HCI IMDS Attestation.
.Example
Add-AzStackHCIVMAttestation -AddAll
.Example
Invoke-Command -ScriptBlock {Add-AzStackHCIVMAttestation -VMName "bhat2", "ppt7pn0"} -ComputerName "HCINODE2"
 
.Inputs
System.Object[]
.Inputs
System.String[]
.Outputs
System.Management.Automation.PSObject
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/add-azstackhcivmattestation
#>

function Add-AzStackHCIVMAttestation {
[OutputType([System.Management.Automation.PSObject])]
[CmdletBinding(DefaultParameterSetName='VMName', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='VMName', Position=0, Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String[]]
    # Specifies an array of guest VMs to enable.
    ${VMName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # No confirmations.
    ${Force},

    [Parameter(ParameterSetName='VMObject', Position=0, Mandatory, ValueFromPipeline)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Object[]]
    # Specifies an array of VM objects from Get-VM.
    ${VM},

    [Parameter(ParameterSetName='AddAll', Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Specifies a switch that will add all current guest VMs on host to IMDS Attestation on the current node.
    ${AddAll}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            VMName = 'Az.StackHCI.custom\Add-AzStackHCIVMAttestation';
            VMObject = 'Az.StackHCI.custom\Add-AzStackHCIVMAttestation';
            AddAll = 'Az.StackHCI.custom\Add-AzStackHCIVMAttestation';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Disable-AzStackHCIAttestation disables IMDS Attestation on the host
.Description
Disable-AzStackHCIAttestation disables IMDS Attestation on the host
.Example
Disable-AzStackHCIAttestation -RemoveVM
 
.Outputs
System.Management.Automation.PSObject
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/disable-azstackhciattestation
#>

function Disable-AzStackHCIAttestation {
[OutputType([System.Management.Automation.PSObject])]
[CmdletBinding(PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Position=0)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the AzureStack HCI host to perform the operation on.
    ${ComputerName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.PSCredential]
    # Specifies the credential for the ComputerName.
    # Default is the current user executing the Cmdlet.
    ${Credential},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Specifies the guests on each node should be removed from IMDS Attestation before disabling on cluster.
    # Disable cannot continue before guests are removed.
    ${RemoveVM},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # No confirmation.
    ${Force}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            __AllParameterSets = 'Az.StackHCI.custom\Disable-AzStackHCIAttestation';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Disables Remote Support.
.Description
Disable Remote Support revokes all access levels previously granted.
Any existing support sessions will be terminated, and new sessions can no longer be established.
.Example
Disable-AzStackHCIRemoteSupport
 
.Outputs
System.Boolean
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/disable-azstackhciremotesupport
#>

function Disable-AzStackHCIRemoteSupport {
[OutputType([System.Boolean])]
[CmdletBinding(PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param()

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            __AllParameterSets = 'Az.StackHCI.custom\Disable-AzStackHCIRemoteSupport';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Enable-AzStackHCIAttestation configures the host and enables specified guests for IMDS attestation.
.Description
Enable-AzStackHCIAttestation configures the host and enables specified guests for IMDS attestation.
.Example
Enable-AzStackHCIAttestation -AddVM
 
.Outputs
System.Management.Automation.PSObject
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/enable-azstackhciattestation
#>

function Enable-AzStackHCIAttestation {
[OutputType([System.Management.Automation.PSObject])]
[CmdletBinding(PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Position=0)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the AzureStack HCI host to perform the operation on.
    # Note: this host should match the host of VMName.
    ${ComputerName},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.PSCredential]
    # Specifies the credential for the ComputerName.
    # Default is the current user executing the Cmdlet.
    ${Credential},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # After enabling each cluster node for Attestation, add all guests on each node.
    ${AddVM},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # No confirmations.
    ${Force}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            __AllParameterSets = 'Az.StackHCI.custom\Enable-AzStackHCIAttestation';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Enables Remote Support.
.Description
Enables Remote Support allows authorized Microsoft Support users to remotely access the device for diagnostics or repair depending on the access level granted.
.Example
Enable-AzStackHCIRemoteSupport -AccessLevel Diagnostics -ExpireInMinutes 1440 -SasCredential "Sample SAS"
.Example
Enable-AzStackHCIRemoteSupport -AccessLevel DiagnosticsRepair -ExpireInMinutes 1440 -SasCredential "Sample SAS" -AgreeToRemoteSupportConsent
 
.Outputs
System.Boolean
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/enable-azstackhciremotesupport
#>

function Enable-AzStackHCIRemoteSupport {
[OutputType([System.Boolean])]
[CmdletBinding(PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Position=0, Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Controls the remote operations that can be performed.
    # This can be either Diagnostics or DiagnosticsAndRepair.
    ${AccessLevel},

    [Parameter(Position=1)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Int32]
    ${ExpireInMinutes},

    [Parameter(Position=2)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Hybrid Connection SAS Credential.
    ${SasCredential},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Optional.
    # If set to true then records user consent as provided and proceeds without prompt.
    ${AgreeToRemoteSupportConsent}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            __AllParameterSets = 'Az.StackHCI.custom\Enable-AzStackHCIRemoteSupport';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Returns Logs directory path on the current node.
.Description
Returns Logs directory path on the current node.
.Example
Get-AzStackHCILogsDirectory
 
.Outputs
System.String
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/get-azstackhcilogsdirectory
#>

function Get-AzStackHCILogsDirectory {
[OutputType([System.String])]
[CmdletBinding(PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Position=0)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.PSCredential]
    # Specifies the credential for the ComputerName.
    # Default is the current user executing the Cmdlet.
    ${Credential},

    [Parameter(Position=1)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies one of the cluster node in on-premise cluster that is registered to Azure.
    ${ComputerName}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            __AllParameterSets = 'Az.StackHCI.custom\Get-AzStackHCILogsDirectory';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Gets Remote Support Access.
.Description
Gets remote support access.
.Example
Get-AzStackHCIRemoteSupportAccess -Cluster
.Example
Get-AzStackHCIRemoteSupportAccess -Cluster -IncludeExpired
 
.Outputs
System.Boolean
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/get-azstackhciremotesupportaccess
#>

function Get-AzStackHCIRemoteSupportAccess {
[OutputType([System.Boolean])]
[CmdletBinding(PositionalBinding=$false)]
param(
    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Optional.
    # Defaults to false.
    # Indicates whether to show remote support sessions across cluster.
    ${Cluster},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Optional.
    # Defaults to false.
    # Indicates whether to include past expired entries.
    ${IncludeExpired}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            __AllParameterSets = 'Az.StackHCI.custom\Get-AzStackHCIRemoteSupportAccess';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Gets Remote Support Session History Details.
.Description
Session history represents all remote accesses made by Microsoft Support for either Diagnostics or DiagnosticsRepair based on the Access Level granted.
.Example
Get-AzStackHCIRemoteSupportSessionHistory
 
.Outputs
System.Boolean
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/get-azstackhciremotesupportsessionhistory
#>

function Get-AzStackHCIRemoteSupportSessionHistory {
[OutputType([System.Boolean])]
[CmdletBinding(PositionalBinding=$false)]
param(
    [Parameter(Position=0)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Optional.
    # Session Id to get details for a specific session.
    # If omitted then lists all sessions starting from date 'FromDate'.
    ${SessionId},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Optional.
    # Defaults to false.
    # Indicates whether to include complete session transcript.
    # Transcript provides details on all operations performed during the session.
    ${IncludeSessionTranscript},

    [Parameter(Position=1)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.DateTime]
    # Optional.
    # Defaults to last 7 days.
    # Indicates date from where to start listing sessions from until now.
    ${FromDate}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            __AllParameterSets = 'Az.StackHCI.custom\Get-AzStackHCIRemoteSupportSessionHistory';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Get-AzStackHCIVMAttestation shows a list of guests added to IMDS Attestation on a node.
.Description
Get-AzStackHCIVMAttestation shows a list of guests added to IMDS Attestation on a node.
.Example
Get-AzStackHCIVMAttestation
.Example
Get-AzStackHCIVMAttestation -Local
 
.Outputs
System.Management.Automation.PSObject
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/get-azstackhcivmattestation
#>

function Get-AzStackHCIVMAttestation {
[OutputType([System.Management.Automation.PSObject])]
[CmdletBinding(PositionalBinding=$false)]
param(
    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Only retrieve guests with Attestation from the node executing the cmdlet.
    ${Local}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            __AllParameterSets = 'Az.StackHCI.custom\Get-AzStackHCIVMAttestation';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Installs Remote Support.
.Description
Install-AzStackHCIRemoteSupport installs Remote Support Deployment module.
.Example
Install-AzStackHCIRemoteSupport
 
.Outputs
System.Boolean
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/install-azstackhciremotesupport
#>

function Install-AzStackHCIRemoteSupport {
[OutputType([System.Boolean])]
[CmdletBinding(PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param()

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            __AllParameterSets = 'Az.StackHCI.custom\Install-AzStackHCIRemoteSupport';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Register-AzStackHCI creates a Microsoft.AzureStackHCI cloud resource representing the on-premises cluster and registers the on-premises cluster with Azure.
.Description
Register-AzStackHCI creates a Microsoft.AzureStackHCI cloud resource representing the on-premises cluster and registers the on-premises cluster with Azure.
.Example
Register-AzStackHCI -SubscriptionId "12a0f531-56cb-4340-9501-257726d741fd" -Region "eastus"
.Example
Register-AzStackHCI -SubscriptionId "12a0f531-56cb-4340-9501-257726d741fd" -ComputerName ClusterNode1 -Region "eastus"
.Example
Register-AzStackHCI -SubscriptionId "12a0f531-56cb-4340-9501-257726d741fd" -ArmAccessToken etyer..ere= -AccountId user1@corp1.com -Region westus -ResourceName DemoHCICluster3 -ResourceGroupName DemoHCIRG
.Example
Register-AzStackHCI -SubscriptionId "12a0f531-56cb-4340-9501-257726d741fd" -Region westus -ResourceName HciCluster1 -TenantId "c31c0dbb-ce27-4c78-ad26-a5f717c14557" -ResourceGroupName HciRG -ArcServerResourceGroupName HciRG -ArmAccessToken eerrer..ere= -AccountId user1@corp1.com -EnvironmentName AzureCloud -ComputerName node1hci -Credential Get-Credential
 
.Outputs
PSCustomObject. Returns following Properties in PSCustomObject
Result: Success or Failed or Cancelled.
ResourceId: Resource ID of the resource created in Azure.
PortalResourceURL: Azure Portal Resource URL.
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/register-azstackhci
#>

function Register-AzStackHCI {
[CmdletBinding(PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(Position=0, Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the Azure Subscription to create the resource.
    # SubscriptionId is a Mandatory parameter.
    ${SubscriptionId},

    [Parameter(Position=1, Mandatory)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the Region to create the resource.
    # Region is a Mandatory parameter.
    ${Region},

    [Parameter(Position=2)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the resource name of the resource created in Azure.
    # If not specified, on-premises cluster name is used.
    ${ResourceName},

    [Parameter(Position=3)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Collections.Hashtable]
    # Specifies the resource tags for the resource in Azure in the form of key-value pairs in a hash table.
    # For example: @{key0="value0";key1=$null;key2="value2"}
    ${Tag},

    [Parameter(Position=4)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the Azure TenantId.
    ${TenantId},

    [Parameter(Position=5)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the Azure Resource Group name.
    # If not specified <LocalClusterName>-rg will be used as resource group name.
    ${ResourceGroupName},

    [Parameter(Position=6)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the ARM access token.
    # Specifying this along with AccountId will avoid Azure interactive logon.
    ${ArmAccessToken},

    [Parameter(Position=7)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the Account Id.
    # Specifying this along with ArmAccessToken will avoid Azure interactive logon.
    ${AccountId},

    [Parameter(Position=8)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the Azure Environment.
    # Default is AzureCloud.
    # Valid values are AzureCloud, AzureChinaCloud, AzurePPE, AzureCanary, AzureUSGovernment
    ${EnvironmentName},

    [Parameter(Position=9)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the cluster name or one of the cluster node in on-premise cluster that is being registered to Azure.
    ${ComputerName},

    [Parameter(Position=10)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the thumbprint of the certificate available on all the nodes.
    # User is responsible for managing the certificate.
    ${CertificateThumbprint},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Repair the current Azure Stack HCI registration with the cloud.
    # This cmdlet deletes the local certificates on the clustered nodes and the remote certificates in the Azure AD application in the cloud and generates new replacement certificates for both.
    # The resource group, resource name, and other registration choices are preserved.
    ${RepairRegistration},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Use device code authentication instead of an interactive browser prompt.
    ${UseDeviceAuthentication},

    [Parameter(Position=11)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.PSCredential]
    # Specifies the credential for the ComputerName.
    # Default is the current user executing the Cmdlet.
    ${Credential},

    [Parameter()]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # Registrations through Windows Admin Center specifies this parameter to true.
    ${IsWAC},

    [Parameter(Position=12)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the Arc Resource Group name.
    # If not specified, cluster resource group name will be used.
    ${ArcServerResourceGroupName},

    [Parameter(Position=13)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.Management.Automation.PSCredential]
    # Specifies the credentials to be used for onboarding ARC agent.
    # If not specified, new set of credentials will be generated.
    ${ArcSpnCredential},

    [Parameter(Position=14)]
    [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Category('Body')]
    [System.String]
    # Specifies the Path where the log files are to be saved.
    # Has to be an absolute Path.
    # Default value would be: C:\ProgramData\AzureStackHCI
    ${LogsDirectory}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
        }         
        $preTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        if ($preTelemetryId -eq '') {
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId =(New-Guid).ToString()
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Create', $MyInvocation, $parameterSet, $PSCmdlet)
        } else {
            $internalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
            if ($internalCalledCmdlets -eq '') {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $MyInvocation.MyCommand.Name
            } else {
                [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets += ',' + $MyInvocation.MyCommand.Name
            }
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = 'internal'
        }

        $mapping = @{
            __AllParameterSets = 'Az.StackHCI.custom\Register-AzStackHCI';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        if ($null -ne $MyInvocation.MyCommand -and [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets -notcontains $MyInvocation.MyCommand.Name -and [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ContainsPreviewAttribute($cmdInfo, $MyInvocation)){
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.Runtime.MessageAttributeHelper]::ProcessPreviewMessageAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PromptedPreviewMessageCmdlets.Enqueue($MyInvocation.MyCommand.Name)
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }

    finally {
        $backupTelemetryId = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId
        $backupInternalCalledCmdlets = [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
    }

}
end {
    try {
        $steppablePipeline.End()

        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $backupTelemetryId
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::InternalCalledCmdlets = $backupInternalCalledCmdlets
        if ($preTelemetryId -eq '') {
            [Microsoft.Azure.PowerShell.Cmdlets.StackHCI.module]::Instance.Telemetry.Invoke('Send', $MyInvocation, $parameterSet, $PSCmdlet)
            [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        }
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::TelemetryId = $preTelemetryId

    } catch {
        [Microsoft.WindowsAzure.Commands.Common.MetricHelper]::ClearTelemetryContext()
        throw
    }
} 
}

<#
.Synopsis
Removes Remote Support.
.Description
Remove-AzStackHCIRemoteSupport uninstalls Remote Support Deployment module.
.Example
Remove-AzStackHCIRemoteSupport
 
.Outputs
System.Boolean
.Link
https://learn.microsoft.com/powershell/module/az.stackhci/remove-azstackhciremotesupport
#>

function Remove-AzStackHCIRemoteSupport {
[OutputType([System.Boolean])]
[CmdletBinding(PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param()

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName

        if ($null -eq [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion) {
            [Microsoft.WindowsAzure.Commands.Utilities.Common.AzurePSCmdlet]::PowerShellVersion = $PSVersionTable.PSVersion.ToString()
&n