Framework/Configurations/ContinuousAssurance/RunbookScanAgent.ps1

function ConvertStringToBoolean($strToConvert)
{
   if([bool]::TryParse($strToConvert, [ref] $strToConvert))
    {
        return $strToConvert
    }
    else
    {
        return $false
    }
}

function UploadFilesToBlob([string] $containerName, [string] $blobName, [string] $fileName,[object] $stgCtx) {
    try {
        Set-AzStorageBlobContent -File $fileName -Container $containerName -Context $stgCtx -Blob $blobName -ErrorAction Stop | Out-Null
    }
    catch {
        
    $blob = $stgCtx.StorageAccount.CreateCloudBlobClient().GetContainerReference($containerName).GetBlockBlobReference($blobName)
    $task = $blob.UploadFromFileAsync($fileName)
    $task.Wait()
    }
}

function GetFilesFromBlob([string] $containerName, [string] $blobName, [string] $fileName,[object] $stgCtx) {
    $blob = Get-AzStorageBlob -Container $containerName -Blob $blobName -Context $stgCtx
    $task = $blob.ICloudBlob.DownloadToFileAsync($fileName,[System.IO.FileMode]::Create)
    $task.Wait()
    if (-not ($task.IsCompleted -and !$task.IsFaulted))
    {
        #Need to change write method
        Write-Debug "Downloading file from" + $blobName + " has failed!!"
    }
}
function RunAzSKScan() {

    ################################ Begin: Configure AzSK for the scan #########################################
    #set the source as CA by default
    Set-AzSKMonitoringSettings -Source "CA"
    #set Monitoring settings
    if(-not [string]::IsNullOrWhiteSpace($LAWSId) -and -not [string]::IsNullOrWhiteSpace($LAWSSharedKey))
    {
        Set-AzSKMonitoringSettings -LAWSId $LAWSId -LAWSSharedKey $LAWSSharedKey -Source "CA"
    }
    #set alternate Log Analytics workspace if available
    if(-not [string]::IsNullOrWhiteSpace($AltLAWSId) -and -not [string]::IsNullOrWhiteSpace($AltLAWSSharedKey))
    {
        Set-AzSKMonitoringSettings -AltLAWSId $AltLAWSId -AltLAWSSharedKey $AltLAWSSharedKey -Source "CA"
    }
    #set webhook settings
    if(-not [string]::IsNullOrWhiteSpace($WebhookUrl))    
    {
        if(-not [string]::IsNullOrWhiteSpace($WebhookAuthZHeaderName) -and -not [string]::IsNullOrWhiteSpace($WebhookAuthZHeaderValue))
        {
            Set-AzSKWebhookSettings -WebhookUrl $WebhookUrl -AuthZHeaderName $WebhookAuthZHeaderName -AuthZHeaderValue $WebhookAuthZHeaderValue -Source "CA"
        }
        else
        {
            Set-AzSKWebhookSettings -WebhookUrl $WebhookUrl -Source "CA"
        }
    }

    #If enableAADAuth... flag is ON, we will attempt to send an AAD token to the online policy store.
    #Else it is assumed that the policy store URL has a (SAS) token built-in.
    $EnableAADAuthForOnlinePolicyStore = ConvertStringToBoolean($EnableAADAuthForOnlinePolicyStore)
    if ($EnableAADAuthForOnlinePolicyStore) {
        Set-AzSKPolicySettings -OnlinePolicyStoreUrl $OnlinePolicyStoreUrl -EnableAADAuthForOnlinePolicyStore
    }
    else {
        Set-AzSKPolicySettings -OnlinePolicyStoreUrl $OnlinePolicyStoreUrl
    }

    # (Auto-)Accepting EULA and privacy as we are running in the background. The privacy consent here is
    # implied because the end user who sets up CA would need to accept the EULA to run AzSK on their desktop.
    Set-AzSKPrivacyNoticeResponse -AcceptPrivacyNotice "yes" 

    ################################ End: Configure AzSK for the scan #########################################
    PublishEvent -EventName "CA Scan Started" -Properties @{
        "ResourceGroupNames"       = $ResourceGroupNames; `
            "OnlinePolicyStoreUrl" = $OnlinePolicyStoreUrl; `
            "LAWSId"       = $LAWSId;
    }

    #Check if the central scan mode is enabled. Read/prepare artefacts if so.
    #The $Global:IsCentralMode flag is enabled in this...also the target subs list is generated (called subsToScan)
    CheckForSubscriptionsSnapshotData
    
    #Get the current storagecontext
    $existingStorage = Get-AzStorageAccount -ResourceGroupName $StorageAccountRG | Where-Object {$_.StorageAccountName  -like 'azsk*'}
    
    if(($existingStorage|Measure-Object).Count -gt 1)
    {
        $existingStorage = $existingStorage[0]
        Write-Output ("SA: Multiple storage accounts found in resource group. Using Storage Account: [$($existingStorage.StorageAccountName)] for storing logs")
    }
    $keys = Get-AzStorageAccountKey -ResourceGroupName $StorageAccountRG -Name $existingStorage.StorageAccountName

    #The 'centralStorageContext' always represents the parent subscription storage.
    #In multi-sub scan this is the central sub. In single sub scan, this is just the storage in that sub.
    $centralStorageContext = New-AzStorageContext -StorageAccountName $existingStorage.StorageAccountName -StorageAccountKey $keys[0].Value -Protocol Https
    
    if($Global:IsCentralMode)
    {
        try
        {
            #This configures AzSK module to maintain separate partial scan data for target subs in Central CA and SDL mode.
            Set-AzSKPolicySettings -EnableCentralScanMode
            
            #Revisit HLD subs only after fresh/in-progress subs are done
            $enableHldRetry = ($Global:subsToScan |Where-Object { $_.Status -in 'NA','INP'} | Measure-Object).Count -le 0
            
            #Scan subs. Pick up only those which are not completed ('COM') or have not gone into error state ('ERR')
            $Global:subsToScan |Where-Object { $_.Status -notin 'ERR','COM'} |ForEach-Object {

                #Candidate sub to eval for scanning.
                $candidateSubToScan = $_;

                #How long have we already spent on this sub?
                $timeNow = [DateTime]::UtcNow
                $scanDuration= ($timeNow-[DateTime]$_.StartedTime).TotalHours

                #Initialize the flags...we determine their actual state further below.
                $isScanAllowed=$false
                $preScanStatus=""
                $postStatus="COM"

                #Possible status flows are [NA --> INP --> COM], [NA --> INP --> HLD --> HLDRETRY --> ERR or COM]
                <#status description:
                    NA = Sub scan not started
                    INP = Sub scan is in progress
                    COM = Sub scan completed
                    HLD = Scan attempted but it's kept on hold because scan taking more time than expected
                    HLDRETRY = Scan will be retried once
                    ERR = Erroring out scan, retry itself also did not work
                #>

                #$preScanStatus = potential next status for the current sub
                if($_.Status -eq "NA")
                {
                    #Start of scan for this sub
                    $preScanStatus="INP"
                }
                elseif($_.Status -eq "INP" -and $scanDuration -ge $MaxScanHours)
                {
                    #If scan has been in-progress and maxHours have been consumed, put this sub on a hold ('HLD') list
                    $preScanStatus="HLD"
                }
                elseif($_.Status -eq "HLD" -and $enableHldRetry)
                {    
                    #If sub was on hold list and a retry is allowed, put this on hold-retry ('HLDRETRY') list
                    $preScanStatus="HLDRETRY"
                }
                elseif($_.Status -eq "HLDRETRY")
                {
                    #If the retry itself also did not work, we are doomed. We will put this in errored-out ('ERR') list.
                    $preScanStatus="ERR"
                }
                else
                {
                    $preScanStatus = "RES"
                }

                #We will actually attempt a scan for:
                # 1. HLDRETRY or fresh sub first scan
                # 2. Scan is in progress and max-duration has not been consumed
                if($preScanStatus -in ("HLDRETRY","INP") -or (($_.Status -eq "INP") -and ($scanDuration -le $MaxScanHours)))
                {
                    $isScanAllowed = $true
                }

                #Let us switch context to the target subscription.
                $subId = $candidateSubToScan.SubscriptionId;
                Set-AzContext -SubscriptionId $subId | Out-Null
                    
                Write-Output ("SA: Scan status details:")
                Write-Output ("SA: Subscription id: [" + $subId + "]")
                
                if($preScanStatus -ne 'RES'){
                    Write-Output ("SA: Existing status: ["+ $_.Status + "], New status: [" + $preScanStatus+ "], Scan allowed?: ["+ $isScanAllowed + "], Post scan status: [" + $postStatus + "]")
                }
                else{
                    Write-Output ("SA: Existing status: ["+ $_.Status + "], Scan allowed?: ["+ $isScanAllowed + "], Post scan status: [" + $postStatus + "]")
                }

                # $preScanStatus will be 'RES' in case when scan is in progress and max-duration has not been consumed
                # We skip updating scan tracker in this scenario.
                if($preScanStatus -ne 'RES'){
                    PersistSubscriptionSnapshot -SubscriptionID $subId -Status $preScanStatus -StorageContext $centralStorageContext 
                }

                if($isScanAllowed){
                    Write-Output ("SA: Multi-sub Scan. Started scan for subscription: [$subId]")

                    #In case of multi-sub scan logging option applies to all subs
                    RunAzSKScanForASub -SubscriptionID $subId -LoggingOption $candidateSubToScan.LoggingOption -StorageContext $centralStorageContext -CentralStorageAccount $existingStorage
                    PersistSubscriptionSnapshot -SubscriptionID $subId -Status $postStatus -StorageContext $centralStorageContext 
                    Write-Output ("SA: Multi-sub Scan. Completed scan for subscription: [$subId]")
                }        
            }
            
        }            
        finally{
            #Always return back to central subscription context.
            Set-AzContext -SubscriptionId $RunAsConnection.SubscriptionID | Out-Null
        }
    }#IsCentralMode
    else
    {
        #Just the vanilla single-sub CA scan (individual CA setup)
        $subId = $RunAsConnection.SubscriptionID
        Write-Output ("SA: Single sub Scan. Starting scan for subscription: [$subId]")
        RunAzSKScanForASub -SubscriptionID $subId -LoggingOption "CentralSub" -StorageContext $centralStorageContext 
        Write-Output ("SA: Single sub Scan. Completed scan for subscription: [$subId]")
    }   
}

function RunAzSKScanForASub
{
    param
    (
        $SubscriptionID,    #This is the subscription to scan.
        $LoggingOption,        #Whether the scan logs to be stored within the target sub or central sub?
        $StorageContext,        #This is the central sub storage context (which is same as target sub in case of individual mode CA)
        $CentralStorageAccount = $null  #This is the central sub storage account
    )
    $svtResultPath = [string]::Empty
    $gssResultPath = [string]::Empty
    $parentFolderPath = [string]::Empty

    #------------------------------------Clear session state to ensure updated policy settings are used-------------------
    Clear-AzSKSessionState

    #------------------------------------Subscription scan----------------------------------------------------------------
    Write-Output ("SA: Running command 'Get-AzSKSubscriptionSecurityStatus' (GSS) for sub: [$SubscriptionID]")
    $subScanTimer = [System.Diagnostics.Stopwatch]::StartNew();
    PublishEvent -EventName "CA Scan Subscription Started"
    $gssResultPath = Get-AzSKSubscriptionSecurityStatus -SubscriptionId $SubscriptionID -ExcludeTags "OwnerAccess" 

    #---------------------------Check subscription scan status--------------------------------------------------------------
    if ([string]::IsNullOrWhiteSpace($gssResultPath)) 
    {
        PublishEvent -EventName "CA Scan Subscription Error" -Metrics @{"TimeTakenInMs" = $subScanTimer.ElapsedMilliseconds; "SuccessCount" = 0}
        Write-Output ("SA: Subscription scan failed.")
    }
    else 
    {
        PublishEvent -EventName "CA Scan Subscription Completed" -Metrics @{"TimeTakenInMs" = $subScanTimer.ElapsedMilliseconds; "SuccessCount" = 1}
        Write-Output ("SA: Subscription scan succeeded.")
        $parentFolderPath = (Get-Item $gssResultPath).parent.FullName
    }

    #-------------------------------------Resources Scan------------------------------------------------------------------

    
    $serviceScanTimer = [System.Diagnostics.Stopwatch]::StartNew();
    PublishEvent -EventName "CA Scan Services Started"

    if(-not [string]::IsNullOrWhiteSpace($ResourceGroupNamefromWebhook))
    {
        Write-Output ("SA: Running command 'Get-AzSKAzureServicesSecurityStatus' (GRS) on added resource for sub: [$SubscriptionID], RGs: [$ResourceGroupNamefromWebhook]")
        $rgname = $ResourceGroupNamefromWebhook | Out-string
        $svtResultPath = Get-AzSKAzureServicesSecurityStatus -SubscriptionId $SubscriptionID -ResourceGroupNames $rgname -ExcludeTags "OwnerAccess,RBAC"
    }
    elseif($null -eq $WebHookDataforResourceCreation)
    {
        Write-Output ("SA: Running command 'Get-AzSKAzureServicesSecurityStatus' (GRS) for sub: [$SubscriptionID], RGs: [$ResourceGroupNames]")
        if($null -ne $CentralStorageAccount)
        {
            $svtResultPath = Get-AzSKAzureServicesSecurityStatus -SubscriptionId $SubscriptionID -ResourceGroupNames "*" -ExcludeTags "OwnerAccess,RBAC"  -CentralStorageAccount $CentralStorageAccount -UsePartialCommits
        }
        else 
        {
            $svtResultPath = Get-AzSKAzureServicesSecurityStatus -SubscriptionId $SubscriptionID -ResourceGroupNames $ResourceGroupNames -ExcludeTags "OwnerAccess,RBAC" -UsePartialCommits
        }
    }
    #---------------------------Check resources scan status--------------------------------------------------------------
    if ([string]::IsNullOrWhiteSpace($svtResultPath)) 
    {
        Write-Output ("SA: Azure resources scan failed.")
        PublishEvent -EventName "CA Scan Services Error" -Metrics @{"TimeTakenInMs" = $serviceScanTimer.ElapsedMilliseconds; "SuccessCount" = 0}
    }
    else 
    {
        Write-Output ("SA: Azure resources scan succeeded.")
        $parentFolderPath = (Get-Item $svtResultPath).parent.FullName
        PublishEvent -EventName "CA Scan Services Completed" -Metrics @{"TimeTakenInMs" = $serviceScanTimer.ElapsedMilliseconds; "SuccessCount" = 1}
    }
    #----------------------------------------Export reports to storage---------------------------------------------------
    PublishEvent -EventName "CA Az Stage4" -Properties @{"Description" = "CA Scanning with Az*"  }

    #If either of the scans (GSS/GRS) completed, let us save the results.
    if (![string]::IsNullOrWhiteSpace($gssResultPath) -or ![string]::IsNullOrWhiteSpace($svtResultPath)) 
    {
        if($Global:IsCentralMode)
        {
            if($LoggingOption -ne "CentralSub")
            {
                Write-Output ("SA: Multi-sub Scan. Storing scan results to child (target) subscription...")

                #save scan results in individual subs
                $existingStorage = Get-AzStorageAccount -ResourceGroupName $StorageAccountRG | Where-Object {$_.StorageAccountName  -like 'azsk*'}
                if(($existingStorage|Measure-Object).Count -gt 1)
                {
                    $existingStorage = $existingStorage[0]
                    Write-Output ("SA: Multiple storage accounts found in resource group. Using Storage Account: [$($existingStorage.StorageAccountName)] for storing logs")
                }

                $archiveFilePath = "$parentFolderPath\AutomationLogs_" + $(Get-Date -format "yyyyMMdd_HHmmss") + ".zip"
                $keys = Get-AzStorageAccountKey -ResourceGroupName $StorageAccountRG -Name $existingStorage.StorageAccountName
                $localStorageContext = New-AzStorageContext -StorageAccountName $existingStorage.StorageAccountName -StorageAccountKey $keys[0].Value -Protocol Https
                try {
                    Get-AzStorageContainer -Name $CAScanLogsContainerName -Context $localStorageContext -ErrorAction Stop | Out-Null
                }
                catch {
                    New-AzStorageContainer -Name $CAScanLogsContainerName -Context $localStorageContext | Out-Null
                }

                PersistToStorageAccount -StorageContext $localStorageContext -GssResultPath $gssResultPath -SvtResultPath $svtResultPath -SubscriptionId $SubscriptionID

                #remove scan reports older than one month
                PurgeOlderScanReports -StorageContext $localStorageContext
            }
            else
            {
                Write-Output ("SA: Multi-sub Scan. Storing scan results to central subscription...")
                PersistToStorageAccount -StorageContext $StorageContext -GssResultPath $gssResultPath -SvtResultPath $svtResultPath -SubscriptionId $SubscriptionID
                #remove scan reports older than one month
                PurgeOlderScanReports -StorageContext $StorageContext
            }
        }#IsCentralMode
        else
        {
            Write-Output ("SA: Single-sub Scan. Storing scan results to subscription...")
            PersistToStorageAccount -StorageContext $StorageContext -GssResultPath $gssResultPath -SvtResultPath $svtResultPath -SubscriptionId $SubscriptionID
            #remove scan reports older than one month
            PurgeOlderScanReports -StorageContext $StorageContext
        }

        #Clean-up of logs in automation sandbox (the automation VM)
        if (![string]::IsNullOrWhiteSpace($svtResultPath)) {
            Remove-Item -Path $svtResultPath -Recurse -ErrorAction Ignore
        }
        if (![string]::IsNullOrWhiteSpace($gssResultPath)) {
            Remove-Item -Path $gssResultPath -Recurse -ErrorAction Ignore
        }
        if (![string]::IsNullOrWhiteSpace($archiveFilePath)) {
            Remove-Item -Path $archiveFilePath -Recurse -ErrorAction Ignore
        }
    }
}

function PersistToStorageAccount
{
    param(
        $StorageContext,
        $GssResultPath,
        $SvtResultPath,
        $SubscriptionId
    )
    if (![string]::IsNullOrWhiteSpace($GssResultPath) -or ![string]::IsNullOrWhiteSpace($SvtResultPath)) {
        
        #Check if the passed storagecontext is null. This would be in the case of default scenario i.e non central mode
        $timeStamp=(Get-Date -format "yyyyMMdd_HHmmss")
        $archiveFilePath = "$parentFolderPath\AutomationLogs_" + $timeStamp + ".zip"
        $storageLocation="$SubContainerName/$SubscriptionId/AutomationLogs_" + $timestamp + ".zip"
            
        try {            
            Get-AzStorageContainer -Name $CAScanLogsContainerName -Context $StorageContext -ErrorAction Stop | Out-Null
        }
        catch {
            New-AzStorageContainer -Name $CAScanLogsContainerName -Context $StorageContext | Out-Null
        }

        #Persist the files to the storage account using the passed storage context
        try {
            if (![string]::IsNullOrWhiteSpace($SvtResultPath)) {
                Compress-Archive -Path $SvtResultPath -CompressionLevel Optimal -DestinationPath $archiveFilePath -Update
            }
            if (![string]::IsNullOrWhiteSpace($GssResultPath)) {
                Compress-Archive -Path $GssResultPath -CompressionLevel Optimal -DestinationPath $archiveFilePath -Update
            }
            #UploadFilesToBlob -containerName $CAScanLogsContainerName -blobName $storageLocation -fileName $archiveFilePath -stgCtx $StorageContext
            Set-AzStorageBlobContent -File $archiveFilePath -Container $CAScanLogsContainerName -Context $StorageContext -Blob $storageLocation -ErrorAction Stop | Out-Null
            Write-Output ("SA: Exported reports to storage: [$StorageAccountName]")
            PublishEvent -EventName "CA Scan Reports Persisted" -Properties @{"StorageAccountName" = $StorageAccountName; "ArchiveFilePath" = $archiveFilePath } -Metrics @{"SuccessCount" = 1}
        }
        catch {
            Write-Output ("SA: Could not export reports to storage: [$StorageAccountName]. `r`nError details:" + ($_ | Out-String))
            PublishEvent -EventName "CA Scan Reports Persist Error" -Properties @{"ErrorRecord" = ($_ | Out-String); "StorageAccountName" = $StorageAccountName; "ArchiveFilePath" = $archiveFilePath } -Metrics @{"SuccessCount" = 0}
            throw $_.Exception
        }        
    }
}

function PurgeOlderScanReports
{
    param(
        $StorageContext
    )
    $NotBefore = [DateTime]::Now.AddDays(-30);
    $OldLogCount = (Get-AzStorageBlob -Container $CAScanLogsContainerName -Context $StorageContext | Where-Object { $_.LastModified -lt $NotBefore} | Measure-Object).Count

    Get-AzStorageBlob -Container $CAScanLogsContainerName -Context $StorageContext | Where-Object { $_.LastModified -lt $NotBefore} | Remove-AzStorageBlob -Force -ErrorAction SilentlyContinue

    if($OldLogCount -gt 0)
    {
        #Deleted successfully all the old reports
        Write-Output ("SA: Removed CA scan logs/reports older than date: [$($NotBefore.ToShortDateString())] from storage account: [$StorageAccountName]")
    }
}

#Used to determine if CA is setup with multi-subscription scanning.
#If so, appropriate bookkeeping files are created/read.
function CheckForSubscriptionsSnapshotData()
{            
    try {
        $CATargetSubsBlobName = "TargetSubs.json"    
        $CAActiveScanSnapshotBlobName = "ActiveScanTracker.json"
        
        if($StorageAccountRG -ne $SubContainerName)
        {
            $CATargetSubsBlobName = "$SubContainerName\TargetSubs.json"    
            $CAActiveScanSnapshotBlobName = "$SubContainerName\ActiveScanTracker.json"
        }
    
        #Temporary working folder to download JSONs from storage in order to read progress/determine what to scan, etc.
        $destinationFolderPath = $env:temp + "\AzSKTemp\"
        if(-not (Test-Path -Path $destinationFolderPath))
        {
            New-Item -ItemType Directory -Path $destinationFolderPath -Force | Out-Null
        }

        $CAActiveScanSnapshotBlobPath = "$destinationFolderPath\$CAActiveScanSnapshotBlobName"
        $CATargetSubsBlobPath = "$destinationFolderPath\$CATargetSubsBlobName"

        $keys = Get-AzStorageAccountKey -ResourceGroupName $StorageAccountRG  -Name $StorageAccountName
        $currentContext = New-AzStorageContext -StorageAccountName $StorageAccountName -StorageAccountKey $keys[0].Value -Protocol Https
        
        #Fetch TargetSubs blob from storage.
        $CAScanSourceDataBlobObject = Get-AzStorageBlob -Container $CAMultiSubScanConfigContainerName -Blob $CATargetSubsBlobName -Context $currentContext -ErrorAction SilentlyContinue

        #If TargetSubs were NOT found, we are not operating in 'central-scan' mode
        if($null -eq $CAScanSourceDataBlobObject)
        {
            $Global:IsCentralMode = $false;
            return;
        }
        

        #See if some of the target subs have already been scanned or a scan is in progress
        $CAScanDataBlobObject = Get-AzStorageBlob -Container $CAMultiSubScanConfigContainerName -Blob $CAActiveScanSnapshotBlobName -Context $currentContext -ErrorAction SilentlyContinue 
        if($null -ne $CAScanDataBlobObject)
        {
            Write-Output("SA: Multi-sub scan in progress. Reading progress tracking file...")
            #Found an active scan, download progress-tracker file to our temp location.
            #GetFilesFromBlob -containerName $CAMultiSubScanConfigContainerName -blobName $CAActiveScanSnapshotBlobName -fileName $($destinationFolderPath + $CAActiveScanSnapshotBlobName) -stgCtx $currentContext
            Get-AzStorageBlobContent -Container $CAMultiSubScanConfigContainerName -Blob $CAActiveScanSnapshotBlobName -Context $currentContext -Destination $destinationFolderPath -Force | Out-Null
            
            #Read the state of various subscriptions in the target list from the progress-tracker file.
            $Global:subsToScan = [array](Get-ChildItem -Path $CAActiveScanSnapshotBlobPath -Force | Get-Content | ConvertFrom-Json)            
        }
        else
        {
            Write-Output("SA: Multi-sub scan starting up. Creating new progress tracking file...")

            #No active scan in progress. This is likely the start of a fresh scan.
            #We will need to *create* the progress-tracker file before starting the scan.
            $CAScanDataBlobObject = Get-AzStorageBlob -Container $CAMultiSubScanConfigContainerName -Blob $CATargetSubsBlobName -Context $currentContext -ErrorAction Stop | Out-Null
            #GetFilesFromBlob -containerName $CAMultiSubScanConfigContainerName -blobName $CATargetSubsBlobName -fileName $($destinationFolderPath + $CATargetSubsBlobName) -stgCtx $currentContext
            Get-AzStorageBlobContent -Container $CAMultiSubScanConfigContainerName -Blob $CATargetSubsBlobName -Context $currentContext -Destination $destinationFolderPath -Force | Out-Null
    
            $CAScanDataBlobContent = Get-ChildItem -Path "$CATargetSubsBlobPath" -Force | Get-Content | ConvertFrom-Json

            #Create the active snapshot from the ca scan objects
            $Global:subsToScan = @();
            if(($CAScanDataBlobContent | Measure-Object).Count -gt 0)
            {
                $CAScanDataBlobContent | ForEach-Object {
                    $CAScanDataInstance = $_;
                    $out = "" | Select-Object SubscriptionId, Status, LoggingOption, CreatedTime, StartedTime, CompletedTime
                        $out.SubscriptionId = $CAScanDataInstance.SubscriptionId
                        $out.Status = "NA";
                        $out.LoggingOption = $CAScanDataInstance.LoggingOption;
                        $out.CreatedTime = [DateTime]::UtcNow.ToString('s');
                        $out.StartedTime = [DateTime]::MinValue.ToString('s');
                        $out.CompletedTime = [DateTime]::MinValue.ToString('s');
                        $Global:subsToScan += $out;
                }                
                $Global:subsToScan | ConvertTo-Json -Depth 10 | Out-File $CAActiveScanSnapshotBlobPath
                #UploadFilesToBlob -containerName $CAMultiSubScanConfigContainerName -blobName $CAActiveScanSnapshotBlobName -fileName $CAActiveScanSnapshotBlobPath -stgCtx $currentContext
                Set-AzStorageBlobContent -File $CAActiveScanSnapshotBlobPath -Blob $CAActiveScanSnapshotBlobName -Container $CAMultiSubScanConfigContainerName -BlobType Block -Context $currentContext -Force | Out-Null
            }
            Write-Output("SA: Multi-sub scan. New progress tracking file uploaded to container...")

        }
        if(($Global:subsToScan | Measure-Object).Count -gt 0)
        {
            $Global:IsCentralMode = $true;
        }
    }
    catch {
        Write-Output("SA: Unexpected error while reading multi-sub scan artefacts from storage...`r`nError details: "+ ($_ | Out-String))
        PublishEvent -EventName "CA Scan Error-PreviewSnapshotComputation" -Properties @{ "ErrorRecord" = ($_ | Out-String) } -Metrics @{"TimeTakenInMs" = $scanAgentTimer.ElapsedMilliseconds; "SuccessCount" = 0}
        $Global:IsCentralMode = $false;
    }
}

function PersistSubscriptionSnapshot
{
    param(
        $SubscriptionID,
        $Status,
        $StorageContext
    )
    try {
        $CAActiveScanSnapshotBlobName = "ActiveScanTracker.json"
        $destinationFolderPath = $env:temp + "\AzSKTemp\"

        if($StorageAccountRG -ne $SubContainerName)
        {
            $CAActiveScanSnapshotBlobName = "$SubContainerName\ActiveScanTracker.json"
        }

        if(-not (Test-Path -Path $destinationFolderPath))
        {
            New-Item -ItemType Directory -Path $destinationFolderPath -Force | Out-Null
        }
        $CAActiveScanSnapshotBlobPath = "$destinationFolderPath\$CAActiveScanSnapshotBlobName"
        
        #Fetch if there is any existing active scan snapshot
        $CAScanDataBlobObject = Get-AzStorageBlob -Container $CAMultiSubScanConfigContainerName -Blob $CAActiveScanSnapshotBlobName -Context $StorageContext -ErrorAction SilentlyContinue 
        if($null -ne $CAScanDataBlobObject)
        {
            #We found a blob for active scan... locate the provided subscription in it to update its status.
            #GetFilesFromBlob -containerName $CAMultiSubScanConfigContainerName -blobName $CAActiveScanSnapshotBlobName -fileName $($destinationFolderPath + $CAActiveScanSnapshotBlobName) -stgCtx $StorageContext
            Get-AzStorageBlobContent -Container $CAMultiSubScanConfigContainerName -Blob $CAActiveScanSnapshotBlobName -Context $StorageContext -Destination $destinationFolderPath -Force | Out-Null
            $subsToScan = [array](Get-ChildItem -Path $CAActiveScanSnapshotBlobPath -Force | Get-Content | ConvertFrom-Json)

            $matchedSubId = $subsToScan | Where-Object {$_.SubscriptionId -eq $SubscriptionID}

            if(($matchedSubId | Measure-Object).Count -gt 0)
            {
                $matchedSubId[0].SubscriptionId = $SubscriptionID
                $matchedSubId[0].Status = $Status;
                if($Status -eq "COM")
                {
                    $matchedSubId[0].CompletedTime = [DateTime]::UtcNow.ToString('s');
                }
                elseif($Status -eq "INP")
                {    
                    #This will never get double-called since we call only upon first time transition to 'INP'
                    $matchedSubId[0].StartedTime = [DateTime]::UtcNow.ToString('s');
                }
                
                if($Status -eq "ERR")
                {
                    Write-Output("SA: Unable to scan subscription: [$SubscriptionID]. Moving on to the next one...")                    
                }
            }

            
            #Write the updated status back to the storage blob
            $subsToScan | ConvertTo-Json -Depth 10 | Out-File $CAActiveScanSnapshotBlobPath
            #UploadFilesToBlob -containerName $CAMultiSubScanConfigContainerName -blobName $CAActiveScanSnapshotBlobName -fileName $CAActiveScanSnapshotBlobPath -stgCtx $StorageContext
            Set-AzStorageBlobContent -File $CAActiveScanSnapshotBlobPath -Blob $CAActiveScanSnapshotBlobName -Container $CAMultiSubScanConfigContainerName -BlobType Block -Context $StorageContext -Force | Out-Null

            #This is the last persist status. Archiving it for diagnosys purpose.
            if(($subsToScan | Where-Object { $_.Status -notin ("COM","ERR")} | Measure-Object).Count -eq 0)
            {
                $errSubsCount = ($subsToScan | Where-Object { $_.Status -eq "ERR"} | Measure-Object).Count

                if($errSubsCount -gt 0)
                {
                    #We archive *only* if sub(s) went into 'ERR' status
                    Write-Output("SA: Archiving ActiveScanTracker.json as there were some errors...")
                    ArchiveBlob -StorageContext $StorageContext
                    Write-Output ("SA: Scan could not be completed for a total of [$errSubsCount] subscription(s).`nSee subscriptions with 'ERR' state in:`n`t $StorageAccountRG -> $($StorageContext.StorageAccountName) -> $CAMultiSubScanConfigContainerName -> Archive -> ActiveScanTracker_<timestamp>.ERR.json.")
                }
                Write-Output("SA: Multi-sub scan: Removing ActiveScanTracker.json")
                Remove-AzStorageBlob -Container $CAMultiSubScanConfigContainerName -Blob $CAActiveScanSnapshotBlobName -Context $StorageContext -Force
            }
        }
    }
    catch {
        Write-Output("SA: Multi-sub Scan: An error occurred during persisting progress snapshot...`nError details:" + ($_ | Out-String) )
        PublishEvent -EventName "CA Scan Error-PreviewSnapshotPersist" -Properties @{ "ErrorRecord" = ($_ | Out-String) } -Metrics @{"TimeTakenInMs" = $scanAgentTimer.ElapsedMilliseconds; "SuccessCount" = 0}
        $Global:IsCentralMode = $false;
    }
}

function ArchiveBlob
    {
        param(
        $StorageContext
        )
    
        try
        {
            $activeSnapshotBlob="ActiveScanTracker"
            $ArchiveTemp = $env:temp + "\AzSKTemp\Archive"
            if(-not (Test-Path -Path $ArchiveTemp))
            {
                New-Item -ItemType Directory -Path $ArchiveTemp -Force | Out-Null
            }            
        
            $archiveName =  $activeSnapshotBlob + "_" +  (Get-Date).ToUniversalTime().ToString("yyyyMMddHHmmss") + ".ERR.json";
            $masterFilePath = "$ArchiveTemp\$archiveName"
            $CAActiveScanSnapshotArchiveBlobName = "Archive\$archiveName"
            if($StorageAccountRG -ne $SubContainerName)
            {
                $CAActiveScanSnapshotArchiveBlobName = "$SubContainerName\Archive\$archiveName"
            }
            $activeSnapshotBlob = Get-AzStorageBlob -Container $CAMultiSubScanConfigContainerName -Context $StorageContext -Blob ($activeSnapshotBlob+".json") -ErrorAction SilentlyContinue
            if($null -ne $activeSnapshotBlob)
            {
                #GetFilesFromBlob -containerName $CAMultiSubScanConfigContainerName -blobName ($activeSnapshotBlob+".json") -fileName $masterFilePath -stgCtx $StorageContext
                Get-AzStorageBlobContent -CloudBlob $activeSnapshotBlob.ICloudBlob -Context $StorageContext -Destination $masterFilePath -Force | Out-Null            
                #UploadFilesToBlob -containerName $CAMultiSubScanConfigContainerName -blobName $CAActiveScanSnapshotArchiveBlobName -fileName $masterFilePath -stgCtx $StorageContext
                Set-AzStorageBlobContent -File $masterFilePath -Container $CAMultiSubScanConfigContainerName -Blob $CAActiveScanSnapshotArchiveBlobName -BlobType Block -Context $StorageContext -Force | Out-Null
            }
        }
        catch
        {
            #eat exception as archive should not impact actual flow
            Write-Output("SA: Multi-sub Scan: Not able to archive active scan tracker")
        }
    }

function UpdateAlertMonitoring
{
    param
    (   
        $SubscriptionID,
        $DisableAlertRunbook,
        $AlertRunBookFullName,
        $ResourceGroup        
    )
    try
    {
      if($DisableAlertRunbook)
      {
        Remove-AzSKAlertMonitoring -SubscriptionId $SubscriptionID
        PublishEvent -EventName "Alert Monitoring Disabled" -Properties @{ "SubscriptionId" = $SubscriptionID }
      }
      else
      {
        $AlertRunbookPresent= Get-AzAutomationRunbook -AutomationAccountName $AutomationAccountName -ResourceGroupName $ResourceGroup -Name $AlertRunBookFullName -ErrorAction SilentlyContinue
        if(-not $AlertRunbookPresent)
        {
          Set-AzSKAlertMonitoring -SubscriptionId $SubscriptionID -Force | Out-Null
          PublishEvent -EventName "Alert Monitoring Enabled" -Properties @{ "SubscriptionId" = $SubscriptionID }
        }
         else
        {          
          $ExistingWebhook=Get-AzAutomationWebhook -RunbookName $AlertRunbookPresent.Name -ResourceGroup $ResourceGroup -AutomationAccountName $AlertRunbookPresent.AutomationAccountName
          if(($null -ne $ExistingWebhook) -and ((Get-Date).AddHours(24) -gt $ExistingWebhook.ExpiryTime.DateTime))
          {
             #update existing webhook for alert runbook
             Set-AzSKAlertMonitoring -SubscriptionId $SubscriptionID | Out-Null
             PublishEvent -EventName "Alert Monitoring Updated Webhook" -Properties @{ "SubscriptionId" = $SubscriptionID }
          }
        }
      
      }
    }
    catch
    {
     PublishEvent -EventName "Alert Monitoring Error" -Properties @{ "ErrorRecord" = ($_ | Out-String) }
    }
}
function DisableHelperSchedules()
{
    Get-AzAutomationSchedule -ResourceGroupName $AutomationAccountRG -AutomationAccountName $AutomationAccountName | `
    Where-Object {$_.Name -ilike "*$CAHelperScheduleName*"} | `
    Set-AzAutomationSchedule -IsEnabled $false | Out-Null
    
}

function AddAutomationVariable
{
    param
    (   
        $VariableName,
        $Details        
    )
    try
    {
        Write-Output("Checking if the variable " + $VariableName + " exists...")
        $existingVariable = Get-AzAutomationVariable -Name $VariableName -AutomationAccountName $AutomationAccountName -ResourceGroupName $AutomationAccountRG -ErrorAction SilentlyContinue
        if(($existingVariable | Measure-Object).Count -eq 0)
        {
            Write-Output("Adding the variable " + $VariableName + "...")
            New-AzAutomationVariable -AutomationAccountName $Details.AutomationAccountName -Name $VariableName -Encrypted $False -Value $Details.Value -ResourceGroupName $Details.ResourceGroupName -ErrorAction SilentlyContinue
            Set-AzAutomationVariable $Details.AutomationAccountName -Name $VariableName -ResourceGroupName $Details.ResourceGroupName -Description $Details.Description -ErrorAction SilentlyContinue
        }
    }
    catch
    {
        throw $_.Exception
    }
}

#############################################################################################################
# Main ScanAgent code
#############################################################################################################
try {    
    #start timer
    $scanAgentTimer = [System.Diagnostics.Stopwatch]::StartNew();
    Write-Output("SA: Scan agent starting...")

        #config start
        #Setup during Install-CA. These are the RGs that CA will scan. "*" is allowed.
        $ResourceGroupNames = Get-AutomationVariable -Name "AppResourceGroupNames"
        
        #Primary Log Analytics workspace info. This is mandatory. CA will send events to this WS.
        $LAWSId = Get-AutomationVariable -Name "LAWSId" -ErrorAction SilentlyContinue
        if(($LAWSId | Measure-Object).Count -eq 0)
        {
            $LAWSId = Get-AutomationVariable -Name "OMSWorkspaceId"
        }

        $LAWSSharedKey = Get-AutomationVariable -Name "LAWSSharedKey" -ErrorAction SilentlyContinue
        if(($LAWSSharedKey | Measure-Object).Count -eq 0)
        {
            $LAWSSharedKey = Get-AutomationVariable -Name "OMSSharedKey"
        }
        
        #Secondary/alternate Log Analytics workspace info. This is optional. Facilitates federal/state type models.
        $AltLAWSId = Get-AutomationVariable -Name "AltLAWSId" -ErrorAction SilentlyContinue
        if(($AltLAWSId | Measure-Object).Count -eq 0)
        {
            $AltLAWSId = Get-AutomationVariable -Name "AltOMSWorkspaceId" -ErrorAction SilentlyContinue
        }

        $AltLAWSSharedKey = Get-AutomationVariable -Name "AltLAWSSharedKey" -ErrorAction SilentlyContinue
        if(($AltLAWSSharedKey | Measure-Object).Count -eq 0)
        {
            $AltLAWSSharedKey = Get-AutomationVariable -Name "AltOMSSharedKey" -ErrorAction SilentlyContinue
        }
        
        #CA can also optionally be configured to send events to a Webhook.
        $WebhookUrl = Get-AutomationVariable -Name "WebhookUrl" -ErrorAction SilentlyContinue
        $WebhookAuthZHeaderName = Get-AutomationVariable -Name "WebhookAuthZHeaderName" -ErrorAction SilentlyContinue
        $WebhookAuthZHeaderValue = Get-AutomationVariable -Name "WebhookAuthZHeaderValue" -ErrorAction SilentlyContinue
        
        #This is the storage account where scan reports will be stored (in ZIP form)
        $StorageAccountName = Get-AutomationVariable -Name "ReportsStorageAccountName"

        #This is to enable/disable Alerts runbook. (Used if an org wants to collect alerts info from across subs.)
        $DisableAlertRunbook = Get-AutomationVariable -Name "DisableAlertRunbook" -ErrorAction SilentlyContinue
        $AlertRunbookName="Alert_Runbook"

        #Defaults.
            $AzSKModuleName = "AzSKPreview"
        $StorageAccountRG = "AzSKRG"
        #In case of multiple CAs in single sub we use sub-container to host working files for each individual CA
        #Sub-container has the same name as each CA automation account RG (hence guaranteed to be unique)
        $SubContainerName = $AutomationAccountRG
        
        $CAMultiSubScanConfigContainerName = "ca-multisubscan-config"
        $CAScanLogsContainerName="ca-scan-logs"
        
        #Max time we will spend to scan a single sub
        $MaxScanHours = 8
        
        ##config end

        #We get sub id from RunAsConnection

        $SubscriptionID = $RunAsConnection.SubscriptionID
        $Global:IsCentralMode = $false;

        $Global:subsToScan = @();
        Set-AzContext -SubscriptionId $SubscriptionID;
        
        #Another job is already running
        if($Global:FoundExistingJob)
        {
            Write-Output("SA: Found another job running. Returning from the current one...")
            return;
        }

        $isAzSKAvailable = (Get-AzAutomationModule -ResourceGroupName $AutomationAccountRG `
                -AutomationAccountName $AutomationAccountName `
                -Name $AzSKModuleName -ErrorAction SilentlyContinue | `
                Where-Object {$_.ProvisioningState -eq "Succeeded" -or $_.ProvisioningState -eq "Created"} | `
                Measure-Object).Count -gt 0
        if ($isAzSKAvailable) {
            Import-Module $AzSKModuleName
        }
        else {
            PublishEvent -EventName "CA Job Skipped" -Properties @{"SubscriptionId" = $RunAsConnection.SubscriptionID} -Metrics @{"TimeTakenInMs" = $timer.ElapsedMilliseconds; "SuccessCount" = 1}
            Write-Output("SA: The module: {$AzSKModuleName} is not available/ready. Skipping AzSK scan. Will retry in the next run.")
            return;
        }

        #Return if modules are not ready
        if ((Get-Command -Name "Get-AzSKAzureServicesSecurityStatus" -ErrorAction SilentlyContinue|Measure-Object).Count -eq 0) {
            
            PublishEvent -EventName "CA Job Skipped" -Properties @{"SubscriptionId" = $RunAsConnection.SubscriptionID} -Metrics @{"TimeTakenInMs" = $timer.ElapsedMilliseconds; "SuccessCount" = 1}
            Write-Output("SA: The module: {$AzSKModuleName} is not available/ready. Skipping AzSK scan. Will retry in the next run.")
            return;
        }
            
        #Scan and save results to storage
        RunAzSKScan
        if($null -eq $WebHookDataforResourceCreation)
        {
            if ($isAzSKAvailable) {
            #Remove helper schedule as AzSK module is available
            Write-Output("SA: Disabling helper schedule...")
            DisableHelperSchedules    
            }

            #Call UpdateAlertMonitoring to setup or Remove Alert Monitoring Runbook
            try
            {    
                UpdateAlertMonitoring -DisableAlertRunbook $DisableAlertRunbook -AlertRunBookFullName $AlertRunbookName -SubscriptionID $SubscriptionID -ResourceGroup $StorageAccountRG 
            }
            catch
            {
                PublishEvent -EventName "Alert Monitoring Error" -Properties @{ "ErrorRecord" = ($_ | Out-String) }
                Write-Output("SA: (Non-fatal) Error while updating Alert Monitoring setup...")
            }
        }
        
        PublishEvent -EventName "CA Scan Completed" -Metrics @{"TimeTakenInMs" = $scanAgentTimer.ElapsedMilliseconds}
        Write-Output("SA: Scan agent completed...")

        #------------------------------------Add Log Analytics specific Automation variables-------------------
        try
        {
            PublishEvent -EventName "Adding Log Analytics variables Start"

            $newLAWSIdName = "LAWSId"            
            $newLAWSSharedKeyName = "LAWSSharedKey"
            $newAltLAWSIdName = "AltLAWSId"
            $newAltLAWSSharedKeyName = "AltLAWSSharedKey"
            $laWSIdDetails = Get-AzAutomationVariable -Name "OMSWorkspaceId" -AutomationAccountName $AutomationAccountName -ResourceGroupName $AutomationAccountRG -ErrorAction SilentlyContinue
            $laWSSharedKeyDetails = Get-AzAutomationVariable -Name "OMSSharedKey" -AutomationAccountName $AutomationAccountName -ResourceGroupName $AutomationAccountRG -ErrorAction SilentlyContinue
            $altLAWSIdDetails = Get-AzAutomationVariable -Name "AltOMSWorkspaceId" -AutomationAccountName $AutomationAccountName -ResourceGroupName $AutomationAccountRG -ErrorAction SilentlyContinue
            $altLAWSSharedKeyDetails = Get-AzAutomationVariable -Name "AltOMSSharedKey" -AutomationAccountName $AutomationAccountName -ResourceGroupName $AutomationAccountRG -ErrorAction SilentlyContinue
        
            #Adding Primary Log Analytics Workspace variables.
            if(($laWSIdDetails | Measure-Object).Count -gt 0)
            {
                AddAutomationVariable -VariableName $newLAWSIdName -Details $laWSIdDetails
            }
            if(($laWSSharedKeyDetails | Measure-Object).Count -gt 0)
            {
                AddAutomationVariable -VariableName $newLAWSSharedKeyName -Details $laWSSharedKeyDetails
            }
                    
            #Adding Secondary/Alternate Log Analytics Workspace variables.
            if(($altLAWSIdDetails | Measure-Object).Count -gt 0)
            {
                AddAutomationVariable -VariableName $newAltLAWSIdName -Details $altLAWSIdDetails
            }
            if(($altLAWSSharedKeyDetails | Measure-Object).Count -gt 0)
            {
                AddAutomationVariable -VariableName $newAltLAWSSharedKeyName -Details $altLAWSSharedKeyDetails
            }
            
            PublishEvent -EventName "Adding Log Analytics variables Complete"
        }
        catch
        {
            PublishEvent -EventName "Adding Log Analytics variables addition/update Error" -Properties @{"ErrorRecord" = ($_ | Out-String)}
        }
    
}
catch {
    Write-Output("SA: Unexpected error during CA scan agent execution...`r`nError details: " + ($_ | Out-String))
    PublishEvent -EventName "CA Scan Error" -Properties @{ "ErrorRecord" = ($_ | Out-String) } -Metrics @{"TimeTakenInMs" = $scanAgentTimer.ElapsedMilliseconds; "SuccessCount" = 0}
}