Functions/Set-RegistryKeyValue.ps1

# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

function Set-RegistryKeyValue
{
    <#
    .SYNOPSIS
    Sets a value in a registry key.
     
    .DESCRIPTION
    The `Set-RegistryKeyValue` function sets the value of a registry key. If the key doesn't exist, it is created first. Uses PowerShell's `New-ItemPropery` to create the value if doesn't exist. Otherwise uses `Set-ItemProperty` to set the value.
 
    `DWord` and `QWord` values are stored in the registry as unsigned integers. If you pass a negative integer for the `DWord` and `QWord` parameters, PowerShell will convert it to an unsigned integer before storing. You won't get the same negative number back.
 
    To store integer values greater than `[Int32]::MaxValue` or `[Int64]::MaxValue`, use the `UDWord` and `UQWord` parameters, respectively, which are unsigned integers. These parameters were in Carbon 2.0.
 
    In versions of Carbon before 2.0, you'll need to convert these large unsigned integers into signed integers. You can't do this with casting. Casting preservers the value, not the bits underneath. You need to re-interpret the bits. Here's some sample code:
 
        # Carbon 1.0
        $bytes = [BitConverter]::GetBytes( $unsignedInt )
        $signedInt = [BitConverter]::ToInt32( $bytes, 0 ) # Or use `ToInt64` if you're working with 64-bit/QWord values
        Set-RegistryKeyValue -Path $Path -Name 'MyUnsignedDWord' -DWord $signedInt
 
        # Carbon 2.0
        Set-RegistryKeyValue -Path $Path -Name 'MyUnsignedDWord' -UDWord $unsignedInt
     
    .LINK
    Get-RegistryKeyValue
     
    .LINK
    Test-RegistryKeyValue
     
    .EXAMPLE
    Set-RegistryKeyValue -Path 'hklm:\Software\Carbon\Test -Name Status -String foobar
     
    Creates the `Status` string value under the `hklm:\Software\Carbon\Test` key and sets its value to `foobar`.
     
    .EXAMPLE
    Set-RegistryKeyValue -Path 'hklm:\Software\Carbon\Test -Name ComputerName -String '%ComputerName%' -Expand
     
    Creates an expandable string. When retrieving this value, environment variables will be expanded.
     
    .EXAMPLE
    Set-RegistryKeyValue -Path 'hklm:\Software\Carbon\Test -Name Movies -String ('Signs','Star Wars','Raiders of the Lost Ark')
     
    Sets a multi-string (i.e. array) value.
     
    .EXAMPLE
    Set-RegistryKeyValue -Path hklm:\Software\Carbon\Test -Name 'SomeBytes' -Binary ([byte[]]@( 1, 2, 3, 4))
     
    Sets a binary value (i.e. `REG_BINARY`).
     
    .EXAMPLE
    Set-RegistryKeyValue -Path hklm:\Software\Carbon\Test -Name 'AnInt' -DWord 48043
     
    Sets a binary value (i.e. `REG_DWORD`).
     
    .EXAMPLE
    Set-RegistryKeyValue -Path hklm:\Software\Carbon\Test -Name 'AnInt64' -QWord 9223372036854775807
     
    Sets a binary value (i.e. `REG_QWORD`).
     
    .EXAMPLE
    Set-RegistryKeyValue -Path hklm:\Software\Carbon\Test -Name 'AnUnsignedInt' -UDWord [uint32]::MaxValue
     
    Demonstrates how to set a registry value with an unsigned integer or an integer bigger than `[int]::MaxValue`.
 
    The `UDWord` parameter was added in Carbon 2.0. In earlier versions of Carbon, you have to convert the unsigned int's bits to a signed integer:
 
        $bytes = [BitConverter]::GetBytes( $unsignedInt )
        $signedInt = [BitConverter]::ToInt32( $bytes, 0 )
        Set-RegistryKeyValue -Path $Path -Name 'MyUnsignedDWord' -DWord $signedInt
         
    .EXAMPLE
    Set-RegistryKeyValue -Path hklm:\Software\Carbon\Test -Name 'AnUnsignedInt64' -UQWord [uint64]::MaxValue
     
    Demonstrates how to set a registry value with an unsigned 64-bit integer or a 64-bit integer bigger than `[long]::MaxValue`.
 
    The `UQWord parameter was added in Carbon 2.0. In earlier versions of Carbon, you have to convert the unsigned int's bits to a signed integer:
 
        $bytes = [BitConverter]::GetBytes( $unsignedInt )
        $signedInt = [BitConverter]::ToInt64( $bytes, 0 )
        Set-RegistryKeyValue -Path $Path -Name 'MyUnsignedDWord' -DWord $signedInt
     
    .EXAMPLE
    Set-RegistryKeyValue -Path hklm:\Software\Carbon\Test -Name 'UsedToBeAStringNowShouldBeDWord' -DWord 1 -Force
     
    Uses the `Force` parameter to delete the existing `UsedToBeAStringNowShouldBeDWord` before re-creating it. This flag is useful if you need to change the type of a registry value.
    #>

    [CmdletBinding(SupportsShouldPRocess=$true,DefaultParameterSetName='String')]
    param(
        [Parameter(Mandatory=$true)]
        [string]
        # The path to the registry key where the value should be set. Will be created if it doesn't exist.
        $Path,
        
        [Parameter(Mandatory=$true)]
        [string]
        # The name of the value being set.
        $Name,
        
        [Parameter(Mandatory=$true,ParameterSetName='String')]
        [AllowEmptyString()]
        [AllowNull()]
        [string]
        # The value's data. Creates a value for holding string data (i.e. `REG_SZ`). If `$null`, the value will be saved as an empty string.
        $String,
        
        [Parameter(ParameterSetName='String')]
        [Switch]
        # The string should be expanded when retrieved. Creates a value for holding expanded string data (i.e. `REG_EXPAND_SZ`).
        $Expand,
        
        [Parameter(Mandatory=$true,ParameterSetName='Binary')]
        [byte[]]
        # The value's data. Creates a value for holding binary data (i.e. `REG_BINARY`).
        $Binary,
        
        [Parameter(Mandatory=$true,ParameterSetName='DWord')]
        [int]
        # The value's data. Creates a value for holding a 32-bit integer (i.e. `REG_DWORD`).
        $DWord,
        
        [Parameter(Mandatory=$true,ParameterSetName='DWordAsUnsignedInt')]
        [uint32]
        # The value's data as an unsigned integer (i.e. `UInt32`). Creates a value for holding a 32-bit integer (i.e. `REG_DWORD`).
        $UDWord,
        
        [Parameter(Mandatory=$true,ParameterSetName='QWord')]
        [long]
        # The value's data. Creates a value for holding a 64-bit integer (i.e. `REG_QWORD`).
        $QWord,
        
        [Parameter(Mandatory=$true,ParameterSetName='QWordAsUnsignedInt')]
        [uint64]
        # The value's data as an unsigned long (i.e. `UInt64`). Creates a value for holding a 64-bit integer (i.e. `REG_QWORD`).
        $UQWord,
        
        [Parameter(Mandatory=$true,ParameterSetName='MultiString')]
        [string[]]
        # The value's data. Creates a value for holding an array of strings (i.e. `REG_MULTI_SZ`).
        $Strings,
        
        [Switch]
        # Removes and re-creates the value. Useful for changing a value's type.
        $Force,
        
        [Parameter(DontShow=$true)]
        [Switch]
        # OBSOLETE. Will be removed in a future version of Carbon.
        $Quiet
    )
    
    Set-StrictMode -Version 'Latest'

    Use-CallerPreference -Cmdlet $PSCmdlet -Session $ExecutionContext.SessionState

    if( $PSBoundParameters.ContainsKey('Quiet') )
    {
        Write-Warning ('Set-RegistryKeyValue''s -Quiet switch is obsolete and will be removed in a future version of Carbon. Please remove usages.')
    }

    $value = $null
    $type = $pscmdlet.ParameterSetName
    switch -Exact ( $pscmdlet.ParameterSetName )
    {
        'String' 
        { 
            $value = $String 
            if( $Expand )
            {
                $type = 'ExpandString'
            }
        }
        'Binary' { $value = $Binary }
        'DWord' { $value = $DWord }
        'QWord' { $value = $QWord }
        'DWordAsUnsignedInt' 
        { 
            $value = $UDWord 
            $type = 'DWord'
        }
        'QWordAsUnsignedInt' 
        { 
            $value = $UQWord 
            $type = 'QWord'
        }
        'MultiString' { $value = $Strings }
    }
    
    Install-RegistryKey -Path $Path
    
    if( $Force )
    {
        Remove-RegistryKeyValue -Path $Path -Name $Name
    }

    if( Test-RegistryKeyValue -Path $Path -Name $Name )
    {
        $currentValue = Get-RegistryKeyValue -Path $Path -Name $Name
        if( $currentValue -ne $value )
        {
            Write-Verbose -Message ("[{0}@{1}] {2} -> {3}'" -f $Path,$Name,$currentValue,$value)
            Set-ItemProperty -Path $Path -Name $Name -Value $value
        }
    }
    else
    {
        Write-Verbose -Message ("[{0}@{1}] -> {2}'" -f $Path,$Name,$value)
        $null = New-ItemProperty -Path $Path -Name $Name -Value $value -PropertyType $type
    }
}