exports/New-CVGlobalServerPlan.ps1
|
# ---------------------------------------------------------------------------------- # # Copyright Microsoft Corporation # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # http://www.apache.org/licenses/LICENSE-2.0 # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # ---------------------------------------------------------------------------------- <# .Synopsis Create a Global Server Plan .Description Create a Global Server Plan .Example PS C:\> {{ Add code here }} {{ Add output here }} .Example PS C:\> {{ Add code here }} {{ Add output here }} .Outputs Commvault.Powershell.Models.IPlanResp .Notes COMPLEX PARAMETER PROPERTIES To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables. GLOBALCONFIGINFOCOMMCELLS <IGlobalConfigCommcellInfo[]>: List of Service CommCells where the global configuration should be applied [Guid <String>]: [Id <Int64?>]: [Name <String>]: PLAN <ICreateServerPlan>: . PlanName <String>: Name of the new plan [AdditionalPropertyRpo <Int64?>]: The least RPO in minutes for the plan [AdditionalPropertyStatus <String>]: status if plan backups are enabled or disabled [AddonDatabase <Boolean?>]: Database options should be shown with this plan [AddonFileSystem <Boolean?>]: File system options should be shown with this plan [AddonIndexCopy <Boolean?>]: Index copy options should be shown with this plan [AddonSnap <Boolean?>]: Snap options should be shown with this plan [AddonSnapStatus <String>]: [AllowPlanOverride <Boolean?>]: Flag to enable overriding of plan. Plan cannot be overriden by default. [BackupContentBackupSystemState <Boolean?>]: Do you want to back up the system state? Applicable only for Windows [BackupContentBackupSystemStateOnlyWithFullBackup <Boolean?>]: Do you want to back up system state only with full backup? Applicable only if the value of backupSystemState is true [BackupContentForceUpdateProperties <Boolean?>]: Do you want to sync properties on associated subclients even if properties are overriden at subclient level? [BackupContentMacExcludedPaths <String[]>]: Paths to exclude for Mac [BackupContentMacFilterToExcludePaths <String[]>]: Paths that are exception to excluded paths for Mac [BackupContentMacIncludedPaths <String[]>]: Paths to include for Mac [BackupContentUnixExcludedPaths <String[]>]: Paths to exclude for UNIX [BackupContentUnixFilterToExcludePaths <String[]>]: Paths that are exception to excluded paths for Unix [BackupContentUnixIncludedPaths <String[]>]: Paths to include for UNIX [BackupContentUseVssForSystemState <Boolean?>]: Do you want to back up system state with VSS? Applicable only if the value of backupSystemState is true [BackupContentWindowsExcludedPaths <String[]>]: Paths to exclude for Windows [BackupContentWindowsFilterToExcludePaths <String[]>]: Paths that are exception to excluded paths for Windows [BackupContentWindowsIncludedPaths <String[]>]: Paths to include for Windows [BackupDestinationIds <Int64[]>]: Primary Backup Destination Ids (which were created before plan creation). This is only considered when backupDestinations array object is not defined. [BackupDestinations <ICreatePlanBackupDestination[]>]: Backup destinations for the plan. Specify where you want to store your backup data. BackupDestinationName <String>: Backup destination details. Enter the name during creation. [BackupStartTime <Int64?>]: Backup start time in seconds. The time is provided in unix time format. [BackupsToCopy <String>]: All_JOBS means SYNCHRONOUS copy type, others are applicable for SELECTIVE copy Type only. [FirstExtendedRetentionRuleIsInfiniteRetention <Boolean?>]: If this is set as true, no need to specify retentionPeriodDays. [FirstExtendedRetentionRuleRetentionPeriodDays <Int64?>]: If this is set, no need to specify isInfiniteRetention as false. [FirstExtendedRetentionRuleType <String>]: All_JOBS means SYNCHRONOUS copy type, others are applicable for SELECTIVE copy Type only. [FullBackupTypesToCopy <String>]: Which type of backup type should be copied for the given backup destination when backup type is not all jobs. Default is LAST while adding new backup destination. [IsConfiguredForReplication <Boolean?>]: Used if the copy is used for replication group [IsMirrorCopy <Boolean?>]: Is this a mirror copy? Only considered when isSnapCopy is true. [IsSnapCopy <Boolean?>]: Is this a snap copy? If isMirrorCopy is not set, then default is Vault/Replica. [Mappings <ISnapshotCopyMapping[]>]: [SourceId <Int64?>]: [SourceName <String>]: [SourceVendorId <Int64?>]: [SourceVendorName <String>]: [TargetId <Int64?>]: [TargetName <String>]: [TargetVendorId <Int64?>]: [TargetVendorName <String>]: [Vendor <String>]: Snapshot vendors available for Snap Copy mappings [NetAppCloudTarget <Boolean?>]: Only for snap copy. Enabling this changes SVM Mapping to NetApp cloud targets only. [OptimizeForInstantClone <Boolean?>]: Flag to specify if primary storage is copy data management enabled. [OverrideRetentionSettings <Boolean?>]: Tells if this copy should use storage pool retention period days or the retention defined for this copy. Set as true to use retention defined on this copy. [RegionGuid <String>]: [RegionId <Int64?>]: [RegionName <String>]: [RetentionPeriodDays <Int64?>]: Retention period in days. -1 can be specified for infinite retention. If this and snapRecoveryPoints both are not specified, this takes precedence. [RetentionRuleType <String>]: Which type of retention rule should be used for the given backup destination [SecondExtendedRetentionRuleIsInfiniteRetention <Boolean?>]: If this is set as true, no need to specify retentionPeriodDays. [SecondExtendedRetentionRuleRetentionPeriodDays <Int64?>]: If this is set, no need to specify isInfiniteRetention as false. [SecondExtendedRetentionRuleType <String>]: All_JOBS means SYNCHRONOUS copy type, others are applicable for SELECTIVE copy Type only. [SnapRecoveryPoints <Int64?>]: Number of snap recovery points for snap copy for retention. Can be specified instead of retention period in Days for snap copy. [SourceCopyId <Int64?>]: [SourceCopyName <String>]: [StoragePoolId <Int64?>]: [StoragePoolName <String>]: [StorageTemplateTags <IIdNameValue[]>]: It is used in Global config template plan creation. Needs in plan creation on global commcell [Id <Int64?>]: [Name <String>]: [Value <String>]: [StorageType <String>]: StorageType [ThirdExtendedRetentionRuleIsInfiniteRetention <Boolean?>]: If this is set as true, no need to specify retentionPeriodDays. [ThirdExtendedRetentionRuleRetentionPeriodDays <Int64?>]: If this is set, no need to specify isInfiniteRetention as false. [ThirdExtendedRetentionRuleType <String>]: All_JOBS means SYNCHRONOUS copy type, others are applicable for SELECTIVE copy Type only. [UseExtendedRetentionRules <Boolean?>]: Use extended retention rules [BackupFrequencyOperationType <String>]: Operation type for the list [BackupFrequencySchedules <IPlanSchedule[]>]: BackupType <String>: Schedule Backup level SchedulePatternScheduleFrequencyType <String>: schedule frequency type [ForDatabasesOnly <Boolean?>]: Boolean to indicate if schedule is for database agents [IsRetentionBasedSyntheticFull <Boolean?>]: Boolean to indicate if synthetic full schedule is based on retention rules [PolicyId <Int64?>]: Schedule policy Id to which the schedule belongs [ScheduleId <Int64?>]: Id of the schedule if available, required for modifying, deleting schedule [ScheduleName <String>]: Name of the schedule, for modify [ScheduleOperation <String>]: Operation being performed on schedule [ScheduleOptionCommitFrequencyInHours <Int64?>]: Commit frequency in hours for disk cache backups from automatic schedules [ScheduleOptionDaysBetweenAutoConvert <Int64?>]: Number of days between auto conversion of backup level applicable for databases on incremental and differential schedules of server plan [ScheduleOptionJobRunningTimeInMins <Int64?>]: total job running time in minutes [ScheduleOptionLogFilesThreshold <Int64?>]: The min number of archived log files before a backup job should start [ScheduleOptionLogsDiskUtilizationPercent <Int64?>]: The min log destination disk threshold percentage [ScheduleOptionMinBackupIntervalInMins <Int64?>]: The min number of mins to check for file activity on automatic schedule. [ScheduleOptionO365ItemSelectionOption <String>]: item backup option for O365 V2 backup jobs [ScheduleOptionUseDiskCacheForLogBackups <Boolean?>]: Used to enable disk caching feature on databases for automatic schedules on server plan [SchedulePatternDayOfMonth <Int64?>]: Day on which to run the schedule, applicable for monthly, yearly [SchedulePatternDayOfWeek <String>]: [SchedulePatternDaysBetweenSyntheticFulls <Int64?>]: No of days between two synthetic full jobs [SchedulePatternEndDate <Int64?>]: Schedule end date in epoch format [SchedulePatternExceptions <IScheduleRunException[]>]: Exceptions to when a schedule should not run, either in dates or week of month and days [OnDates <Int64[]>]: list of dates in a month. For ex: 1, 20 [OnDayOfTheWeek <String[]>]: On which days, for ex: MONDAY, FRIDAY [OnWeekOfTheMonth <String[]>]: On which week of month, for ex: FIRST, LAST [SchedulePatternFrequency <Int64?>]: Frequency of the schedule based on schedule frequency type eg. for Hours, value 2 is 2 hours, for Minutes, 30 is 30 minutes, for Daily, 2 is 2 days. for Monthly 2 is it repeats every 2 months [SchedulePatternMaxBackupIntervalInMins <Int64?>]: The number of mins to force a backup on automatic schedule. [SchedulePatternMonthOfYear <String>]: [SchedulePatternNoOfTimes <Int64?>]: The number of times you want the schedule to run. [SchedulePatternRepeatIntervalInMinutes <Int64?>]: How often in minutes in a day the schedule runs, applicable for daily, weekly, monthly and yearly frequency types. [SchedulePatternRepeatUntilTime <Int64?>]: Until what time to repeat the schedule in a day, requires repeatIntervalInMinutes [SchedulePatternStartDate <Int64?>]: start date of schedule in epoch format [SchedulePatternStartTime <Int64?>]: start time of schedule in seconds [SchedulePatternWeekOfMonth <String>]: Specific week of a month [SchedulePatternWeeklyDays <String[]>]: Days of the week for weekly frequency [TimezoneId <Int64?>]: [TimezoneName <String>]: [VMOperationType <String>]: Type of DR operation (only applicable for Failover groups) [DatabaseOptionCommitFrequencyInHours <Int64?>]: Commit frequency in hours [DatabaseOptionLogBackupRpoMins <Int64?>]: Log backup RPO in minutes [DatabaseOptionUseDiskCacheForLogBackups <Boolean?>]: Use disk cache for log backups [FileSearchEnabled <Boolean?>]: Flag for enabling indexing [FileSearchErrors <IPlanFileSearchSetupError[]>]: File search was enabled on plan but failed to process some of the storage pool(s) with these errors [ErrorCode <Int64?>]: [ErrorMessage <String>]: Tells about the error occured during file search setup for given storage pool [StorageId <Int64?>]: [StorageName <String>]: [FileSearchStatus <String>]: Type of indexing status. [FileSearchStatusMessage <String>]: Tells what is happening behind the scene, so that user can knows why indexing is not enabled or if its in progress [FilesystemAddon <Boolean?>]: flag to enable backup content association for applicable file system workload. [MacNumberOfDataReaderCount <Int64?>]: Number of data readers. [MacNumberOfDataReaderUseOptimal <Boolean?>]: Set optimal number of data readers. if it is set to true, count will be ignored. [OverrideRestrictionBackupContent <String>]: [OverrideRestrictionRpo <String>]: [OverrideRestrictionStoragePool <String>]: [ParentPlanId <Int64?>]: [ParentPlanName <String>]: [RpoBackupWindow <IDayAndTime[]>]: Backup window for incremental backup [DayOfWeek <String[]>]: [EndTime <Int64?>]: Time in seconds since the beginning of the day [StartTime <Int64?>]: Time in seconds since the beginning of the day [RpoFullBackupWindow <IDayAndTime[]>]: Backup window for full backup [SettingEnableAdvancedView <Boolean?>]: Setting to suggest plan has some advanced settings present. Setting is OEM specific and not applicable for all cases. [SnapshotOptionBackupCopyRpoMins <Int64?>]: Backup copy RPO in minutes [SnapshotOptionEnableBackupCopy <Boolean?>]: Flag to enable backup copy [SnapshotOptionRetentionPeriodDays <Int64?>]: Retention period in days. -1 can be specified for infinite retention. If this and snapRecoveryPoints both are not specified, this takes precedence. [SnapshotOptionSnapRecoveryPoints <Int64?>]: Number of snap recovery points for default snap copy for retention. Can be specified instead of retention period in Days for default snap copy. [UnixNumberOfDataReaderCount <Int64?>]: Number of data readers. [UnixNumberOfDataReaderUseOptimal <Boolean?>]: Set optimal number of data readers. if it is set to true, count will be ignored. [WindowNumberOfDataReaderCount <Int64?>]: Number of data readers. [WindowNumberOfDataReaderUseOptimal <Boolean?>]: Set optimal number of data readers. if it is set to true, count will be ignored. [WorkloadGroupTypes <String[]>]: [WorkloadSolutions <IIdName[]>]: [Id <Int64?>]: [Name <String>]: [WorkloadTypes <IIdName[]>]: .Link https://docs.microsoft.com/en-us/powershell/module/commvaultpowershell/new-cvglobalserverplan #> function New-CVGlobalServerPlan { [OutputType([Commvault.Powershell.Models.IPlanResp])] [CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')] param( [Parameter()] [Commvault.Powershell.Category('Body')] [System.String] # Action that will be taken on the local entity that has the same name as the global entity that needs to be created ${GlobalConfigInfoActionOnLocalEntity}, [Parameter()] [Commvault.Powershell.Category('Body')] [System.Management.Automation.SwitchParameter] # Decides whether the global configuration should be applied to all the Service commcells, including the newly created ones ${GlobalConfigInfoApplyOnAllCommCells}, [Parameter()] [Commvault.Powershell.Category('Body')] [Commvault.Powershell.Models.IGlobalConfigCommcellInfo[]] # List of Service CommCells where the global configuration should be applied # To construct, see NOTES section for GLOBALCONFIGINFOCOMMCELLS properties and create a hash table. ${GlobalConfigInfoCommcells}, [Parameter()] [Commvault.Powershell.Category('Body')] [System.String] # . ${GlobalConfigInfoName}, [Parameter()] [Commvault.Powershell.Category('Body')] [System.String] # The entity level at which the config has to be applied. ${GlobalConfigInfoScope}, [Parameter()] [Commvault.Powershell.Category('Body')] [System.String] # CommCellEntityCache filter query string using for filtering the scope ${GlobalConfigInfoScopeFilterQuery}, [Parameter()] [Commvault.Powershell.Category('Body')] [Commvault.Powershell.Models.ICreateServerPlan] # . # To construct, see NOTES section for PLAN properties and create a hash table. ${Plan}, [Parameter(DontShow)] [Commvault.Powershell.Category('Runtime')] [System.Management.Automation.SwitchParameter] # Wait for .NET debugger to attach ${Break}, [Parameter(DontShow)] [ValidateNotNull()] [Commvault.Powershell.Category('Runtime')] [Commvault.Powershell.Runtime.SendAsyncStep[]] # SendAsync Pipeline Steps to be appended to the front of the pipeline ${HttpPipelineAppend}, [Parameter(DontShow)] [ValidateNotNull()] [Commvault.Powershell.Category('Runtime')] [Commvault.Powershell.Runtime.SendAsyncStep[]] # SendAsync Pipeline Steps to be prepended to the front of the pipeline ${HttpPipelinePrepend}, [Parameter()] [Commvault.Powershell.Category('Runtime')] [System.Management.Automation.SwitchParameter] # Returns true when the command succeeds ${PassThru}, [Parameter(DontShow)] [Commvault.Powershell.Category('Runtime')] [System.Uri] # The URI for the proxy server to use ${Proxy}, [Parameter(DontShow)] [ValidateNotNull()] [Commvault.Powershell.Category('Runtime')] [System.Management.Automation.PSCredential] # Credentials for a proxy server to use for the remote call ${ProxyCredential}, [Parameter(DontShow)] [Commvault.Powershell.Category('Runtime')] [System.Management.Automation.SwitchParameter] # Use the default credentials for the proxy ${ProxyUseDefaultCredentials} ) begin { try { $outBuffer = $null if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) { $PSBoundParameters['OutBuffer'] = 1 } $parameterSet = $PSCmdlet.ParameterSetName $mapping = @{ CreateExpanded = 'CommvaultPowershell.private\New-CVGlobalServerPlan_CreateExpanded'; } $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet) $scriptCmd = {& $wrappedCmd @PSBoundParameters} $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin) $steppablePipeline.Begin($PSCmdlet) } catch { throw } } process { try { $steppablePipeline.Process($_) } catch { throw } } end { try { $steppablePipeline.End() } catch { throw } } } |