DoctorDO.Collector

1.2.1

Private/Connectivity.ps1

                                #Requires -Version 5.1

# Connectivity matrix (docs/07-connectivity-validation.md, endpoints from docs/17-network-requirements.md).

#

#  * One engine: network probes are batched through Invoke-DDNetProbeBatch (5 s per probe, 60 s total, parallel),

#    local checks are computed from facts already collected. Test-DOConnectivity and the inventory/telemetry

#    paths all call Get-DDConnectivityMatrix.

#  * Results: pass | fail | warn | not-applicable | not-collected. A check that was not run is `not-collected`,

#    never a pass. Applicability is computed from the device's actual download mode.

#  * Network targets come from endpoint health (Endpoints.ps1, Data/endpoints.json): the cloud, content, Teredo and

#    Connected Cache checks below are read from those results, so each host is probed once, on a host the device used

#    or one Microsoft documents, never a guessed one. Only the peer checks probe here.

Set-StrictMode -Version Latest

$script:DDTeredoHost = 'win1910.ipv6.microsoft.com'               # documented (CFG #firewall); also manifest entry teredo-do

function New-DDCheck {

    [CmdletBinding()]

    param(

        [Parameter(Mandatory)][string] $CheckId,

        [string] $Target = '',

        [ValidateSet('dns', 'tcp', 'http', 'https', 'udp', 'local')][string] $Protocol = 'local',

        $Port = $null,

        [Parameter(Mandatory)][ValidateSet('pass', 'fail', 'warn', 'not-applicable', 'not-collected')][string] $Result,

        $LatencyMs = $null,

        [Parameter(Mandatory)][string] $Detail,

        [string] $Evidence

    )

    $o = [ordered]@{ checkId = $CheckId; target = $Target; protocol = $Protocol; port = $Port; result = $Result; latencyMs = $LatencyMs; detail = $Detail }

    if ($Evidence) {

        $e = Protect-DDLogText -Text $Evidence

        $o['evidence'] = $e.Substring(0, [math]::Min(512, $e.Length))

    }

    $o

}

function Get-DDEffectiveValue {

    [CmdletBinding()]

    param($Effective, [Parameter(Mandatory)][string] $Name)

    if ($null -ne $Effective -and $Effective.Contains($Name)) { return $Effective[$Name]['value'] }

    $null

}

# NetTeredoConfiguration.Type in the NetworkTransition module (MSFT_NetTeredoConfiguration.cdxml).

$script:DDTeredoTypes = @{ 0 = 'default'; 1 = 'relay'; 2 = 'client'; 3 = 'server'; 4 = 'disabled'; 5 = 'automatic'; 6 = 'enterpriseclient'; 7 = 'natawareclient' }

function ConvertTo-DDTeredoWord {

    # One Teredo state or error word, lower case: "probe(primary server)" -> probe, "Qualified" -> qualified; none -> $null.

    [CmdletBinding()]

    param([AllowNull()][AllowEmptyString()][string] $Text)

    if ([string]::IsNullOrWhiteSpace($Text)) { return $null }

    $w = ([regex]::Match($Text.Trim(), '^[A-Za-z_-]+')).Value.ToLowerInvariant()

    if (-not $w -or $w -eq 'none') { return $null }

    $w

}

function ConvertFrom-DDTeredoState {

    <#

    .SYNOPSIS

        Teredo facts from `netsh interface teredo show state` (English output only): @{ Type; State; Error; ServerName;

        Source = 'netsh' }, or $null when the text has no Type line. State is the operational state (qualified, dormant,

        probe, offline), not the configured Type; $null when the text has no State line.

    #>

    [CmdletBinding()]

    param([AllowEmptyCollection()][string[]] $Lines)

    $text = @($Lines) -join "`n"

    $line = { param($name) $m = [regex]::Match($text, "(?im)^\s*$name\s*:\s*(.*?)\s*$"); if ($m.Success) { $m.Groups[1].Value } else { $null } }

    $type = & $line 'Type'

    if (-not $type) { return $null }

    $state = & $line 'State'; $err = & $line 'Error'; $server = & $line 'Server Name'

    $errText = $(if ($err -and $err.Trim() -ne 'none') { $err.Trim() } else { $null })

    [pscustomobject]@{ Type = ([regex]::Match($type, '^\S+')).Value.ToLowerInvariant(); State = (ConvertTo-DDTeredoWord $state); Error = $errText

        ServerName = $(if ($server) { $server.Trim().TrimEnd('.').ToLowerInvariant() } else { $null }); Source = 'netsh' }

}

function ConvertFrom-DDTeredoRaw {

    # Teredo facts from the Teredo classes (Get-DDTeredoStateRaw), shaped as ConvertFrom-DDTeredoState's. No state object is

    # Microsoft's "Teredo is not active": State 'inactive'.

    [CmdletBinding()]

    param($Raw)

    if ($null -eq $Raw) { return $null }

    $type = $null

    if ($null -ne $Raw.Type) { $n = 0; if ([int]::TryParse([string]$Raw.Type, [ref]$n) -and $script:DDTeredoTypes.ContainsKey($n)) { $type = $script:DDTeredoTypes[$n] } else { $type = ([string]$Raw.Type).ToLowerInvariant() } }

    $state = $(if ($Raw.StatePresent) { ConvertTo-DDTeredoWord ([string]$Raw.State) } else { 'inactive' })

    $err = $(if ($Raw.StatePresent -and $Raw.Error -and ([string]$Raw.Error).Trim() -ne 'none') { ([string]$Raw.Error).Trim() } else { $null })

    $server = Get-DDProp $Raw 'ServerName'

    [pscustomobject]@{ Type = $type; State = $state; Error = $err; ServerName = $(if ($server) { ([string]$server).Trim().TrimEnd('.').ToLowerInvariant() } else { $null }); Source = 'cim' }

}

function Get-DDTeredoFacts {

    # The Teredo classes first (language independent), netsh when they cannot be read. $null, with notCollected, when

    # neither can.

    [CmdletBinding()]

    param([Parameter(Mandatory)] $Context)

    $cim = $null

    try { $cim = ConvertFrom-DDTeredoRaw -Raw (Get-DDTeredoStateRaw) } catch { Write-Verbose "Teredo classes not read ($($_.Exception.GetType().Name)); trying netsh" }

    if ($null -ne $cim -and $cim.Type) { return $cim }

    Invoke-DDStep -Context $Context -Field 'connectivity.teredo-state' -Script {

        $t = ConvertFrom-DDTeredoState -Lines (Get-DDTeredoStateText)

        if ($null -eq $t) { throw [System.FormatException]::new('netsh interface teredo show state gave no Type line (its output is read in English only)') }

        $t

    }

}

# The matrix is capped (the inventory schema allows 128 results): 88 checks plus up to 40 endpoint-health rows

# (MAX_ENDPOINT_RESULTS in packages/schema).

$script:DDMaxMatrixChecks = 88

$script:DDMaxEndpointRows = 40

function Select-DDMatrixRows {

    <#

    .SYNOPSIS

        At most -Max of the checks, none of the one-per-check results lost to the per-host rows (docs/27 3.3). Priority order:

        the first row of every checkId (health, local and prerequisite checks, and one row per per-host group) in matrix order,

        then the further per-host rows (more peers, content hosts, cache hosts) in matrix order until the cap. The result keeps

        matrix order. Dropped is how many rows did not fit. Pure.

    #>

    [CmdletBinding()]

    param([AllowEmptyCollection()] $Checks = @(), [int] $Max = $script:DDMaxMatrixChecks)

    $all = @($Checks)

    $seen = New-Object 'System.Collections.Generic.HashSet[string]'

    $primary = New-Object 'System.Collections.Generic.List[int]'

    $extra = New-Object 'System.Collections.Generic.List[int]'

    for ($i = 0; $i -lt $all.Count; $i++) {

        if ($seen.Add([string]$all[$i]['checkId'])) { $primary.Add($i) } else { $extra.Add($i) }

    }

    $take = New-Object 'System.Collections.Generic.List[int]'

    foreach ($i in $primary) { if ($take.Count -lt $Max) { $take.Add($i) } }

    foreach ($i in $extra) { if ($take.Count -lt $Max) { $take.Add($i) } }

    $take.Sort()

    $rows = New-Object 'System.Collections.Generic.List[object]'

    foreach ($i in $take) { $rows.Add($all[$i]) }

    [pscustomobject]@{ Rows = $rows.ToArray(); Dropped = ($all.Count - $rows.Count) }

}

function Get-DDConnectivityMatrix {

    <#

    .SYNOPSIS

        Build the full connectivity matrix from probes and local facts.

    #>

    [CmdletBinding()]

    param(

        [Parameter(Mandatory)] $Context,

        $DoEffective,

        $Network,

        [AllowEmptyCollection()] $FirewallRules = @(),

        [AllowEmptyCollection()] $ObservedStatus = @(),

        [AllowEmptyCollection()][string[]] $PeerAddresses = @(),

        $DoSvc,

        $RamGB,

        # Capacity of the drive the DO cache is on, in GB (the system drive when the cache drive's size is unknown), and that

        # drive's name for the text. The disk-size check follows the cache drive (docs/27 3.2).

        [Alias('SystemDiskGB')] $DiskGB,

        [string] $DiskDrive = '',

        $Vitals,

        [AllowEmptyCollection()] $EndpointResults = @(),

        $FirewallProfiles,

        [switch] $SkipProbes,

        [int] $ProbeTimeoutMs = 5000,

        [int] $TotalTimeoutMs = 60000,

        # Delivery Optimization health (Health.ps1): the DO geo answer, the cache server DO will use, the DHCP facts, the

        # cache folder, whether DoSvc itself listens on TCP 7680 ($null: not read), the active power plan.

        $GeoAnswer, $CacheResolution, $Dhcp, $CacheFolder, $DoSvcListening = $null, [string] $PowerPlan,

        # Whether DoSvc's own TCP table holds an established peer connection (TCP 7680 at either end); $null: not read.

        $DoSvcPeerConnection = $null

    )

    $checks = New-Object 'System.Collections.Generic.List[object]'

    $mode = Get-DDEffectiveValue -Effective $DoEffective -Name 'DODownloadMode'

    $modeNum = $null; if ($null -ne $mode) { $n = 0; if ([int]::TryParse([string]$mode, [ref]$n)) { $modeNum = $n } }

    $peeringOff = ($null -ne $modeNum -and $modeNum -in 0, 99, 100)

    $peering = ($null -ne $modeNum -and $modeNum -in 1, 2, 3)

    $modeText = $(if ($null -ne $modeNum) { "DODownloadMode=$modeNum" } else { 'DODownloadMode not determined' })

    $skipDetail = 'skipped by -SkipConnectivityChecks'

    # ---- network probes --------------------------------------------------------------------------------------

    $specs = New-Object 'System.Collections.Generic.List[object]'

    $addSpec = { param($kind, $target, $port, $tag) $specs.Add([pscustomobject]@{ Kind = $kind; Target = $target; Port = $port; Tag = $tag }) }

    $cacheHost = [string](Get-DDEffectiveValue -Effective $DoEffective -Name 'DOCacheHost')

    $cacheHosts = @()

    if ($cacheHost) { $cacheHosts = @($cacheHost.Split(',', [System.StringSplitOptions]::RemoveEmptyEntries) | ForEach-Object { $_.Trim() } | Select-Object -First 2) }

    $peers = @($PeerAddresses | Select-Object -First 3)

    if (-not $SkipProbes -and $peering) { for ($i = 0; $i -lt $peers.Count; $i++) { & $addSpec 'tcp' $peers[$i] 7680 "peer:$i" } }

    $out = @{}

    $peerProbeFailed = $false

    if ($specs.Count -gt 0) {

        # Inside a step like every other native entry point: where run-time compilation is refused (Constrained Language

        # Mode, application control) the peer probes are not collected and the rest of the matrix still runs.

        $res = @(Invoke-DDStep -Context $Context -Field 'connectivity.peers' -Default @() -Script { Invoke-DDNetProbeBatch -Specs $specs.ToArray() -ProbeTimeoutMs $ProbeTimeoutMs -TotalTimeoutMs $TotalTimeoutMs })

        $peerProbeFailed = $Context.NotCollected.Exists([Predicate[object]] { param($e) $e['field'] -eq 'connectivity.peers' })

        foreach ($r in $res) { $out[[string]$r.Tag] = $r }

    }

    $probe = { param($tag) if ($out.ContainsKey($tag)) { $out[$tag] } else { $null } }

    $fromProbe = {

        param($r, $okDetail, $failPrefix)

        if ($null -eq $r -and $peerProbeFailed) { return @{ Result = 'not-collected'; Detail = 'The peer probe could not run on this device (see notCollected: connectivity.peers)'; Ms = $null } }

        if ($null -eq $r) { return @{ Result = 'not-collected'; Detail = $skipDetail; Ms = $null } }

        if ($r.Ok) { return @{ Result = 'pass'; Detail = $okDetail; Ms = [double]$r.Ms } }

        if ($r.TimedOut) { return @{ Result = 'fail'; Detail = "$failPrefix timed out after $ProbeTimeoutMs ms (black-holed or filtered)"; Ms = [double]$r.Ms } }

        @{ Result = 'fail'; Detail = "$failPrefix failed: $($r.Error)"; Ms = [double]$r.Ms }

    }

    # ---- cloud service, content and metadata: read from endpoint health ----------------------------------------

    $ep = @($EndpointResults | Where-Object { $_ -is [System.Collections.IDictionary] -and $_['endpoint'] })

    $rowsOf = { param([string] $id) @($ep | Where-Object { $_['endpoint']['id'] -eq $id -and $_['endpoint']['basis'] -notin 'not-testable', 'not-applicable' }) }

    $noEp = $(if ($SkipProbes) { $skipDetail } else { 'endpoint health did not run' })

    # The handshake completed even when the certificate was then judged (inspection, untrusted chain, wrong name).

    $handshake = { param($r) $r['endpoint']['tls'] -eq 'pass' -or ($r['endpoint']['err'] -and [string]$r['endpoint']['err']['code'] -like 'tls-*' -and [string]$r['endpoint']['err']['code'] -ne 'tls-failed') }

    $errText = { param($r, $fallback) if ($r['endpoint']['err']) { [string]$r['endpoint']['err']['message'] } else { $fallback } }

    $cloud = @(& $rowsOf 'do-cloud')

    $geo = @(@($cloud | Where-Object { $_['endpoint']['basis'] -eq 'documented' }) + @($cloud)) | Select-Object -First 1

    $cloudTarget = $(if ($geo) { [string]$geo['target'] } else { 'geo.prod.do.dsp.mp.microsoft.com' })

    if (-not $geo -or $geo['endpoint']['dns'] -eq 'not-collected') { $checks.Add((New-DDCheck -CheckId 'do-cloud-dns' -Target $cloudTarget -Protocol dns -Result 'not-collected' -Detail $noEp)) }

    elseif ($geo['endpoint']['dns'] -eq 'fail') { $checks.Add((New-DDCheck -CheckId 'do-cloud-dns' -Target $cloudTarget -Protocol dns -Result 'fail' -Detail (& $errText $geo 'DNS resolution failed'))) }

    else { $checks.Add((New-DDCheck -CheckId 'do-cloud-dns' -Target $cloudTarget -Protocol dns -Result 'pass' -Detail "Resolved ($((@($geo['endpoint']['dnsTypes']) -join ', ')))")) }

    if (-not $geo -or $geo['endpoint']['tcp'] -eq 'not-collected') { $checks.Add((New-DDCheck -CheckId 'do-cloud-tls' -Target $cloudTarget -Protocol https -Port 443 -Result 'not-collected' -Detail $(if ($geo -and $geo['endpoint']['dns'] -eq 'fail') { 'Not attempted: the name does not resolve' } else { $noEp }))) }

    elseif ($geo['endpoint']['tcp'] -eq 'fail') { $checks.Add((New-DDCheck -CheckId 'do-cloud-tls' -Target $cloudTarget -Protocol https -Port 443 -Result 'fail' -LatencyMs $geo['latencyMs'] -Detail ((& $errText $geo 'TCP 443 connect failed') + ' (DO-NET-001)'))) }

    elseif (& $handshake $geo) { $checks.Add((New-DDCheck -CheckId 'do-cloud-tls' -Target $cloudTarget -Protocol https -Port 443 -Result 'pass' -LatencyMs $geo['latencyMs'] -Detail 'TLS handshake succeeded')) }

    else { $checks.Add((New-DDCheck -CheckId 'do-cloud-tls' -Target $cloudTarget -Protocol https -Port 443 -Result 'fail' -LatencyMs $geo['latencyMs'] -Detail ((& $errText $geo 'TLS handshake failed') + ' (DO-NET-001)'))) }

    $inspect = {

        param($id, $r)

        $h = [string]$r['target']

        $c = $r['endpoint']['cert']

        if ($null -eq $c) { return New-DDCheck -CheckId $id -Target $h -Protocol https -Port 443 -Result 'not-collected' -Detail 'TLS handshake did not complete, issuer not observed' }

        if ($c['issuer'] -eq 'microsoft') { return New-DDCheck -CheckId $id -Target $h -Protocol https -Port 443 -Result 'pass' -LatencyMs $r['latencyMs'] -Detail 'Certificate issued by a Microsoft CA' }

        $who = $(if ($c['issuerCn']) { "'$($c['issuerCn'])'" } else { 'a certificate authority that is not Microsoft' })

        New-DDCheck -CheckId $id -Target $h -Protocol https -Port 443 -Result 'fail' -LatencyMs $r['latencyMs'] -Detail "Certificate issued by $who, not Microsoft: TLS inspection on a pinned DO endpoint (DO-NET-006); there is no workaround" -Evidence ("issuer=$($c['issuer'])" + $(if ($c['issuerCn']) { "; issuerCn=$($c['issuerCn'])" }))

    }

    if ($geo) { $checks.Add((& $inspect 'do-cloud-inspect' $geo)) } else { $checks.Add((New-DDCheck -CheckId 'do-cloud-inspect' -Target $cloudTarget -Protocol https -Port 443 -Result 'not-collected' -Detail $noEp)) }

    $pinnedRows = @(@($cloud) + @(& $rowsOf 'do-array') | Where-Object { $_['endpoint']['tcp'] -eq 'pass' })

    if ($pinnedRows.Count -eq 0) { $checks.Add((New-DDCheck -CheckId 'proxy-tls-inspection' -Target $cloudTarget -Protocol https -Port 443 -Result 'not-collected' -Detail $(if ($geo) { 'No pinned DO endpoint completed a connection, so no certificate was observed' } else { $noEp }))) }

    foreach ($r in $pinnedRows) { $checks.Add((& $inspect 'proxy-tls-inspection' $r)) }

    $tcpCheck = {

        param($checkId, $r, $suffix)

        $port = $r['port']

        $x = $r['endpoint']['tcp']

        $res = $(if ($x -eq 'pass') { 'pass' } elseif ($x -eq 'fail') { 'fail' } else { 'not-collected' })

        # Through a proxy, an HTTP port's connection reaches only the proxy (an HTTPS one is a CONNECT the proxy completed).

        $via = $r['endpoint']['proxy'] -and $r['endpoint']['proxy']['used']

        $ok = $(if (-not $via) { "TCP $port connected" } elseif ($r['protocol'] -eq 'https') { "TCP $port connected through the proxy" } else { "TCP $port`: the proxy is reachable; the HTTP check shows whether it reaches the host" })

        $d = $(if ($res -eq 'pass') { $ok } elseif ($res -eq 'fail') { & $errText $r "TCP $port connect failed" } elseif ($r['endpoint']['dns'] -eq 'fail') { 'Not attempted: the name does not resolve' } else { $noEp })

        New-DDCheck -CheckId $checkId -Target ([string]$r['target']) -Protocol tcp -Port $port -Result $res -LatencyMs $r['latencyMs'] -Detail "$d$suffix"

    }

    $content = @(& $rowsOf 'do-content')

    if ($content.Count -eq 0) { $checks.Add((New-DDCheck -CheckId 'do-content-cdn' -Target '' -Protocol tcp -Port 80 -Result 'not-collected' -Detail $noEp)) }

    foreach ($r in $content) { $checks.Add((& $tcpCheck 'do-content-cdn' $r '')) }

    $wu = @(& $rowsOf 'wu-content')

    if ($wu.Count -eq 0) { $checks.Add((New-DDCheck -CheckId 'do-metadata-wu' -Target '' -Protocol tcp -Port 80 -Result 'not-collected' -Detail $noEp)) }

    foreach ($r in $wu) { $checks.Add((& $tcpCheck 'do-metadata-wu' $r '')) }

    $ranged = @($ep | Where-Object { $_['endpoint']['range'] -in 'pass', 'fail', 'warn' -and $_['endpoint']['id'] -ne 'mcc' })

    if ($ranged.Count -eq 0) {

        $why = $(if ($SkipProbes) { $skipDetail } elseif (@($ObservedStatus).Count -eq 0) { 'No file in the DO job list to test: byte ranges are only requested for a file this device downloaded' } else { 'No file this device downloaded could be tested (none still served, or none on a Microsoft content host)' })

        $checks.Add((New-DDCheck -CheckId 'do-range-support' -Target '' -Protocol http -Result 'not-collected' -Detail $why))

    }

    foreach ($r in $ranged) {

        $x = $r['endpoint']['range']

        $code = $(if ($r['endpoint']['err']) { [string]$r['endpoint']['err']['code'] } else { $null })

        $d = $(if ($x -eq 'pass') { 'Range request on a file this device downloaded returned 206 Partial Content, with a Content-Range for exactly the bytes asked for' }

            elseif ($x -eq 'fail' -and $code -eq 'range-mismatch') { (& $errText $r 'The 206 answer did not describe the range asked for') + ' (DO-NET-004)' }

            elseif ($x -eq 'fail') { 'No 206: the Range request was answered with the whole object; byte ranges are stripped or ignored in the path (DO-NET-004)' }

            else { & $errText $r 'No answer to the byte-range request' })

        $ev = $(if ($r.Contains('evidence')) { [string]$r['evidence'] } else { $null })

        $c = New-DDCheck -CheckId 'do-range-support' -Target ([string]$r['target']) -Protocol http -Port $r['port'] -Result $x -LatencyMs $r['latencyMs'] -Detail $d -Evidence $ev

        if ($code -in 'range-ignored', 'range-mismatch') { $c['code'] = $code }

        $checks.Add($c)

    }

    $byCaller = @($ep | Where-Object { $_['endpoint']['id'] -in 'office-cdn', 'office-cdn-net', 'm365-static', 'intune-win32', 'xbox' -and $_['endpoint']['basis'] -ne 'not-applicable' })

    if ($byCaller.Count -eq 0) { $checks.Add((New-DDCheck -CheckId 'do-content-by-caller' -Protocol tcp -Result 'not-applicable' -Detail 'no content types beyond Windows Update observed in the current DO jobs')) }

    foreach ($r in $byCaller) {

        $label = [string](@((Get-DDEndpointManifest)['endpoints']) | Where-Object { $_['id'] -eq $r['endpoint']['id'] } | Select-Object -First 1)['label']

        if ($r['endpoint']['basis'] -eq 'not-testable') { $checks.Add((New-DDCheck -CheckId 'do-content-by-caller' -Protocol tcp -Port $r['port'] -Result 'not-collected' -Detail "Not testable: wildcard, no observed host (content type: $label)")); continue }

        $checks.Add((& $tcpCheck 'do-content-by-caller' $r " (content type: $label)"))

    }

    # ---- peer to peer --------------------------------------------------------------------------------------------

    # Who listens on 7680: DoSvc's own TCP table when it was read (the collector reads it for the endpoint rows), else any

    # process's listener (the earlier source, which cannot tell DoSvc from another program on the port).

    $listening = $false

    $byDoSvc = $null -ne $DoSvcListening

    if ($byDoSvc) { $listening = [bool]$DoSvcListening }

    else {

        $ports = @(Invoke-DDStep -Context $Context -Field 'connectivity.p2p-listener' -Script { Get-DDListeningTcpPorts } -Default @())

        $listening = $ports -contains 7680

    }

    $listenKnown = $byDoSvc -or -not $Context.NotCollected.Exists([Predicate[object]] { param($e) $e['field'] -eq 'connectivity.p2p-listener' })

    $stopped = $null -ne $DoSvc -and [string](Get-DDProp $DoSvc 'Status') -and [string](Get-DDProp $DoSvc 'Status') -ne 'Running'

    $who = $(if ($byDoSvc) { 'DoSvc' } else { 'A process' })

    # A transfer is active while a job is Downloading or DoSvc holds a peer connection (TCP 7680 at either end). A Caching

    # job has finished ("download completed successfully and is ready to upload or uploading", Microsoft) and stays so for

    # days, so it does not by itself mean DoSvc must be listening.

    $statusIs = { param($rx) [bool](@($ObservedStatus) | Where-Object { [string](Get-DDProp $_ 'status') -match $rx } | Select-Object -First 1) }

    $downloading = & $statusIs '^(?i)downloading$'

    $cached = & $statusIs '^(?i)caching$'

    $activeTransfer = $downloading -or ($DoSvcPeerConnection -eq $true)

    # The reasons Microsoft's FAQ gives for not listening that this device's own facts show (battery, VPN, cellular).

    $batteryRead = -not $Context.NotCollected.Exists([Predicate[object]] { param($e) $e['field'] -eq 'vitals.battery' })

    $quiet = New-Object 'System.Collections.Generic.List[string]'

    if ($batteryRead -and $null -ne $Vitals -and $Vitals['onBattery']) { $quiet.Add('it is on battery') }

    if ($null -ne $Network -and $Network['isVpnActive'] -and (Get-DDEffectiveValue -Effective $DoEffective -Name 'DOAllowVPNPeerCaching') -ne 1) { $quiet.Add('a VPN is connected and DOAllowVPNPeerCaching does not allow peering over it') }

    if ($null -ne $Network -and $Network['adapterType'] -eq 'Cellular') { $quiet.Add('it is on a cellular network') }

    $quietText = ($quiet -join '; ')

    $transferText = $(if ($downloading) { 'a job is downloading' } else { 'DoSvc holds a peer connection' })

    if ($peeringOff) { $checks.Add((New-DDCheck -CheckId 'p2p-listener' -Target 'localhost' -Protocol tcp -Port 7680 -Result 'not-applicable' -Detail "Peering is disabled by $modeText")) }

    elseif ($listening) { $checks.Add((New-DDCheck -CheckId 'p2p-listener' -Target 'localhost' -Protocol tcp -Port 7680 -Result 'pass' -Detail "$who is listening on TCP 7680")) }

    elseif ($activeTransfer -and $quiet.Count -gt 0) { $checks.Add((New-DDCheck -CheckId 'p2p-listener' -Target 'localhost' -Protocol tcp -Port 7680 -Result 'warn' -Detail "Not listening although $transferText. Microsoft documents that DoSvc does not listen while $quietText")) }

    elseif ($activeTransfer) { $checks.Add((New-DDCheck -CheckId 'p2p-listener' -Target 'localhost' -Protocol tcp -Port 7680 -Result 'fail' -Detail "Not listening although $transferText, and none of the reasons Microsoft gives for that (battery, VPN, cellular network) applies to this device")) }

    elseif ($stopped) { $checks.Add((New-DDCheck -CheckId 'p2p-listener' -Target 'localhost' -Protocol tcp -Port 7680 -Result 'warn' -Detail 'DoSvc is not running (it stops when idle), so nothing listens on TCP 7680')) }

    elseif ($cached) { $checks.Add((New-DDCheck -CheckId 'p2p-listener' -Target 'localhost' -Protocol tcp -Port 7680 -Result 'warn' -Detail "Not listening. Its jobs are finished and cached ('Caching'), and no download or peer connection is active: DoSvc stops listening when idle$(if ($quiet.Count -gt 0) { ", and while $quietText" })")) }

    else { $checks.Add((New-DDCheck -CheckId 'p2p-listener' -Target 'localhost' -Protocol tcp -Port 7680 -Result 'warn' -Detail 'Not listening. Expected when idle: DoSvc stops listening with no transfers, no cached files, low battery, Connected Standby, cellular or VPN restrictions')) }

    if ($peeringOff) { $checks.Add((New-DDCheck -CheckId 'p2p-outbound' -Protocol tcp -Port 7680 -Result 'not-applicable' -Detail "Peering is disabled by $modeText")) }

    elseif ($peers.Count -eq 0) { $checks.Add((New-DDCheck -CheckId 'p2p-outbound' -Protocol tcp -Port 7680 -Result 'not-applicable' -Detail 'No peers known to this device right now')) }

    else {

        for ($i = 0; $i -lt $peers.Count; $i++) {

            $r = & $probe "peer:$i"; $x = & $fromProbe $r 'TCP 7680 connected' 'TCP 7680 connect'

            $tgt = 'peer:' + (Get-DDShortHash -Value $peers[$i] -Salt $Context.TenantSalt -Domain 'peer')

            $checks.Add((New-DDCheck -CheckId 'p2p-outbound' -Target $tgt -Protocol tcp -Port 7680 -Result $x.Result -LatencyMs $x.Ms -Detail $x.Detail))

        }

    }

    # firewall rules: inbound Allow rules for TCP 7680 found by port as well as by name (Test-DDTcp7680Allow); a rule that

    # is enabled but whose PrimaryStatus is not OK is not in force.

    $rules = @($FirewallRules)

    $tcpAllow = @($rules | Where-Object { (Test-DDTcp7680Allow -Rule $_) -and $_['enabled'] })

    $inForce = @($tcpAllow | Where-Object { $null -eq (Get-DDProp $_ 'primaryStatus') -or (Get-DDProp $_ 'primaryStatus') -eq 'OK' })

    $notInForce = @($tcpAllow | Where-Object { $null -ne (Get-DDProp $_ 'primaryStatus') -and (Get-DDProp $_ 'primaryStatus') -ne 'OK' })

    $blockers = @($rules | Where-Object { $_['direction'] -eq 'Inbound' -and $_['action'] -eq 'Block' -and $_['enabled'] -and $_['displayName'] -notmatch '(?i)Delivery Optimization' -and

            ([string]$_['localPort'] -match '(?i)(^|,)\s*Any\s*(,|$)' -or [string]$_['localPort'] -eq '' -or (Test-DDPortSpec -Spec ([string]$_['localPort']) -Port 7680)) -and [string]$_['protocol'] -match '^(?i)(TCP|6|Any|)$' })

    # A profile whose policy refuses every inbound connection ("block all incoming", AllowInboundRules=False) overrides

    # any allow rule. Only enabled profiles count: a disabled firewall blocks nothing.

    $shields = @(@($FirewallProfiles) | Where-Object { $null -ne $_ -and [string](Get-DDProp $_ 'AllowInboundRules') -eq 'False' -and [string](Get-DDProp $_ 'Enabled') -ne 'False' } | ForEach-Object { [string](Get-DDProp $_ 'Name') })

    $fwCheck = $null

    $profiles = @(@($FirewallProfiles) | Where-Object { $null -ne $_ })

    $allOff = $profiles.Count -gt 0 -and @($profiles | Where-Object { [string](Get-DDProp $_ 'Enabled') -ne 'False' }).Count -eq 0

    if ($peeringOff) { $fwCheck = New-DDCheck -CheckId 'p2p-firewall-rule' -Protocol local -Port 7680 -Result 'not-applicable' -Detail "Peering is disabled by $modeText" }

    elseif ($allOff) { $fwCheck = New-DDCheck -CheckId 'p2p-firewall-rule' -Protocol local -Port 7680 -Result 'pass' -Detail 'Windows Defender Firewall is off on every profile, so it blocks nothing (another firewall may be in its place)'; $fwCheck['code'] = 'firewall-off' }

    elseif ($shields.Count -gt 0) { $fwCheck = New-DDCheck -CheckId 'p2p-firewall-rule' -Protocol local -Port 7680 -Result 'fail' -Detail "Firewall policy blocks all inbound connections on the $($shields -join ', ') profile (AllowInboundRules=False), whatever the Delivery Optimization rules say (DO-NET-010)"; $fwCheck['code'] = 'inbound-shield' }

    elseif ($blockers.Count -gt 0) { $fwCheck = New-DDCheck -CheckId 'p2p-firewall-rule' -Protocol local -Port 7680 -Result 'fail' -Detail "An enabled inbound Block rule could shadow the DO allow rules: '$($blockers[0]['displayName'])' (DO-NET-010)"; $fwCheck['code'] = 'shadowed' }

    elseif ($inForce.Count -eq 0 -and $notInForce.Count -gt 0) {

        $fwCheck = New-DDCheck -CheckId 'p2p-firewall-rule' -Protocol local -Port 7680 -Result 'fail' -Detail "The inbound Allow rule for TCP 7680 '$($notInForce[0]['displayName'])' is enabled but its status is $((Get-DDProp $notInForce[0] 'primaryStatus')), so it is not in force$(Get-DDEnforcementText -Rule $notInForce[0]) (DO-NET-019)"

        $fwCheck['code'] = 'not-in-force'

    }

    elseif ($inForce.Count -eq 0) { $fwCheck = New-DDCheck -CheckId 'p2p-firewall-rule' -Protocol local -Port 7680 -Result 'fail' -Detail 'No enabled inbound Allow rule for TCP 7680 found, by name or by port (absent or disabled, DO-NET-010)'; $fwCheck['code'] = 'no-allow' }

    else {

        $named = @($inForce | ForEach-Object { "'$($_['displayName'])'" } | Select-Object -First 2) -join ', '

        $fwCheck = New-DDCheck -CheckId 'p2p-firewall-rule' -Protocol local -Port 7680 -Result 'pass' -Detail "$($inForce.Count) enabled inbound Allow rule(s) admit TCP 7680 ($named), no shadowing Block rule"

    }

    $checks.Add($fwCheck)

    # Inbound from peers, as far as the device can tell: its firewall admits TCP 7680 and DoSvc listens on it. Whether the

    # network between devices lets peers through is not measured here.

    $inb = { param($r, $d, $code) $c = New-DDCheck -CheckId 'p2p-inbound' -Target 'localhost' -Protocol tcp -Port 7680 -Result $r -Detail $d; if ($code) { $c['code'] = $code }; $checks.Add($c) }

    if ($peeringOff) { & $inb 'not-applicable' "Peering is disabled by $modeText" $null }

    elseif ($fwCheck['result'] -eq 'fail') { & $inb 'fail' "Peers cannot connect in: the firewall refuses TCP 7680 on this device (see the firewall rule check)" 'firewall' }

    elseif (-not $listenKnown) { & $inb 'not-collected' 'Cannot be tested from this device alone: a peer has to try to connect to it' $null }

    elseif ($listening -and $fwCheck['result'] -eq 'pass') { & $inb 'pass' "$who is listening on TCP 7680 and the firewall admits it: ready to serve peers. Whether the network between devices lets them in is not measured from the device" 'listening' }

    elseif ($listening) { & $inb 'not-collected' "$who is listening on TCP 7680, but the firewall rules could not be judged" $null }

    elseif ($stopped) { & $inb 'warn' "DoSvc is not running, so it is not listening on TCP 7680 and cannot serve peers now. $($script:DDListenerReasons)" 'not-listening' }

    else { & $inb 'warn' "Not listening on TCP 7680 now, so it cannot serve peers at this moment. $($script:DDListenerReasons)" 'not-listening' }

    $lpm = $null; if ($Network) { $lpm = $Network['localPolicyMergeEnabled'] }

    if ($null -eq $lpm) { $checks.Add((New-DDCheck -CheckId 'local-policy-merge' -Protocol local -Result 'not-collected' -Detail 'LocalPolicyMerge state could not be read')) }

    elseif ($lpm) { $checks.Add((New-DDCheck -CheckId 'local-policy-merge' -Protocol local -Result 'pass' -Detail 'Local firewall rules are merged')) }

    else { $checks.Add((New-DDCheck -CheckId 'local-policy-merge' -Protocol local -Result 'warn' -Detail 'LocalPolicyMerge is disabled: this can stop the DHCP client retrieving option 235, breaking Connected Cache discovery (DO-NET-011)')) }

    # Teredo: the operational State (qualified, dormant, probe, offline; none: not active), not only the configured Type.

    # Microsoft: "If the state is 'offline', Teredo is not active, which prevents the user from connecting to other users

    # via their Teredo addresses"; Windows also keeps it offline on a network with a domain controller.

    if ($modeNum -in 2, 3) {

        $t = Get-DDTeredoFacts -Context $Context

        $qualified = $null -ne $t -and $t.State -eq 'qualified'

        $r = & $rowsOf 'teredo-do' | Select-Object -First 1

        # UDP 3544 cannot be confirmed by a connectionless probe; a qualified Teredo client has reached its server over it.

        if ($null -eq $r -or $r['endpoint']['dns'] -eq 'not-collected') { $checks.Add((New-DDCheck -CheckId 'teredo-endpoint' -Target $script:DDTeredoHost -Protocol udp -Port 3544 -Result 'not-collected' -Detail $noEp)) }

        elseif ($r['endpoint']['dns'] -eq 'pass' -and $qualified -and $t.ServerName -eq $script:DDTeredoHost) { $checks.Add((New-DDCheck -CheckId 'teredo-endpoint' -Target $script:DDTeredoHost -Protocol udp -Port 3544 -Result 'pass' -Detail 'Name resolves, and Teredo is qualified with this server, so UDP 3544 to it works')) }

        elseif ($r['endpoint']['dns'] -eq 'pass') { $checks.Add((New-DDCheck -CheckId 'teredo-endpoint' -Target $script:DDTeredoHost -Protocol udp -Port 3544 -Result 'not-collected' -Detail "Name resolves; whether UDP 3544 reaches it cannot be measured by a connectionless probe$(if ($qualified) { ' (Teredo is qualified with another server)' } else { ', and Teredo is not qualified on this device to show it' })")) }

        else { $checks.Add((New-DDCheck -CheckId 'teredo-endpoint' -Target $script:DDTeredoHost -Protocol udp -Port 3544 -Result 'fail' -Detail "$(& $errText $r 'Name does not resolve') (DO-NET-003)")) }

        $tc = { param($result, $code, $detail) $c = New-DDCheck -CheckId 'teredo-state' -Protocol local -Result $result -Detail $detail -Evidence $(if ($t) { "type=$($t.Type); state=$(if ($t.State) { $t.State } else { '(not reported)' }); error=$(if ($t.Error) { $t.Error } else { 'none' }); source=$($t.Source)" }); if ($code) { $c['code'] = $code }; $checks.Add($c) }

        $typeText = $(if ($t -and $t.Type) { "type $($t.Type)" } else { 'type not reported' })

        $errNote = $(if ($t -and $t.Error) { "; error: $($t.Error)" } else { '' })

        if ($null -eq $t) { & $tc 'not-collected' $null 'The Teredo state could not be read' }

        elseif ($t.Type -eq 'disabled') { & $tc 'fail' 'disabled' 'Teredo is disabled; Group (2) and Internet (3) modes need it to reach peers behind other NATs (DO-NET-003)' }

        elseif ($t.State -eq 'qualified') { & $tc 'pass' 'qualified' "Teredo is qualified ($typeText): it has reached its server over UDP 3544" }

        elseif ($t.State -eq 'dormant') { & $tc 'pass' 'dormant' "Teredo is dormant ($typeText): configured and idle, it qualifies again when it is needed" }

        elseif (-not $t.State) { & $tc 'not-collected' $null "Teredo is configured ($typeText); its state was not reported, so whether it is active is not known" }

        elseif ($t.State -eq 'inactive') { & $tc 'warn' 'inactive' "Teredo is not active ($typeText)$errNote, so peers behind other NATs cannot be reached through it. Windows keeps Teredo offline on a network with a domain controller" }

        else { & $tc 'warn' $(if ($t.State -eq 'offline') { 'offline' } else { 'not-qualified' }) "Teredo is $($t.State) ($typeText)$errNote, so peers behind other NATs cannot be reached through it. Windows keeps Teredo offline on a network with a domain controller" }

    } else {

        $why = "Teredo is only needed for Group or Internet mode ($modeText)"

        $checks.Add((New-DDCheck -CheckId 'teredo-endpoint' -Target $script:DDTeredoHost -Protocol udp -Port 3544 -Result 'not-applicable' -Detail $why))

        $checks.Add((New-DDCheck -CheckId 'teredo-state' -Protocol local -Result 'not-applicable' -Detail $why))

    }

    # ---- Connected Cache -----------------------------------------------------------------------------------------

    # The cache server is infrastructure and is reported in clear, under -Anonymise as well (ADR-0031).

    $tag = { param($h) $h }

    if ($cacheHosts.Count -eq 0) {

        $checks.Add((New-DDCheck -CheckId 'mcc-config' -Protocol local -Result 'not-applicable' -Detail 'No DOCacheHost configured'))

        $checks.Add((New-DDCheck -CheckId 'mcc-reachable' -Protocol tcp -Port 80 -Result 'not-applicable' -Detail 'No DOCacheHost configured'))

        $checks.Add((New-DDCheck -CheckId 'mcc-serving' -Protocol http -Result 'not-applicable' -Detail 'No DOCacheHost configured'))

    } else {

        $checks.Add((New-DDCheck -CheckId 'mcc-config' -Target (& $tag $cacheHosts[0]) -Protocol local -Result 'pass' -Detail "$($cacheHosts.Count) cache host(s) configured"))

        $reach = $false; $verified = $false

        $mccRows = @(& $rowsOf 'mcc')

        foreach ($h in $cacheHosts) {

            $bare = ConvertTo-DDCacheHostName $h

            $r = $mccRows | Where-Object { $_['target'] -eq $bare } | Select-Object -First 1

            if ($null -eq $r) { $checks.Add((New-DDCheck -CheckId 'mcc-reachable' -Target (& $tag $h) -Protocol tcp -Port 80 -Result 'not-collected' -Detail $noEp)); continue }

            $x = & $tcpCheck 'mcc-reachable' $r ''

            if ($x['result'] -eq 'pass') { $reach = $true }

            if ($r['endpoint']['http'] -eq 'pass') { $verified = $true }

            $checks.Add($x)

        }

        $cacheBytes = [System.Numerics.BigInteger]::Zero

        foreach ($s in @($ObservedStatus)) { $cacheBytes += (ConvertTo-DDBigInt (Get-DDProp $s 'bytesFromCacheServer')) }

        if (@($ObservedStatus).Count -eq 0 -and $verified) { $checks.Add((New-DDCheck -CheckId 'mcc-serving' -Target (& $tag $cacheHosts[0]) -Protocol http -Result 'pass' -Detail "Answers Microsoft's verification request; no DO jobs to inspect right now")) }

        elseif (@($ObservedStatus).Count -eq 0) { $checks.Add((New-DDCheck -CheckId 'mcc-serving' -Target (& $tag $cacheHosts[0]) -Protocol http -Result 'not-collected' -Detail 'No DO jobs to inspect right now')) }

        elseif ($cacheBytes -gt 0) { $checks.Add((New-DDCheck -CheckId 'mcc-serving' -Target (& $tag $cacheHosts[0]) -Protocol http -Result 'pass' -Detail 'BytesFromCacheServer is above zero in current jobs')) }

        elseif ($reach) { $checks.Add((New-DDCheck -CheckId 'mcc-serving' -Target (& $tag $cacheHosts[0]) -Protocol http -Result 'warn' -Detail 'Cache host is reachable but delivered nothing in current jobs')) }

        else { $checks.Add((New-DDCheck -CheckId 'mcc-serving' -Target (& $tag $cacheHosts[0]) -Protocol http -Result 'fail' -Detail 'Cache host unreachable and nothing delivered (DO-NET-007)')) }

    }

    # ---- proxy ---------------------------------------------------------------------------------------------------

    $checks.Add((New-DDCheck -CheckId 'proxy-source-ip' -Protocol local -Result 'not-applicable' -Detail 'Evaluated by the service by comparing network.publicEgressHash across devices on one subnet (DO-NET-009)'))

    if ($null -eq $Network) { $checks.Add((New-DDCheck -CheckId 'proxy-scope' -Protocol local -Result 'not-collected' -Detail 'proxy state could not be read')) }

    else {

        $px = $Network['proxy']

        if (-not $px['configured']) { $checks.Add((New-DDCheck -CheckId 'proxy-scope' -Protocol local -Result 'pass' -Detail 'No proxy configured')) }

        elseif ($px['wininetScope'] -eq 'per-user') { $checks.Add((New-DDCheck -CheckId 'proxy-scope' -Protocol local -Result 'fail' -Detail 'Per-user WinINET proxy only: background downloads (NetworkService) will not use it (DO-NET-012)')) }

        elseif ($px['wininetScope'] -eq 'none' -and $px['netshConfigured']) { $checks.Add((New-DDCheck -CheckId 'proxy-scope' -Protocol local -Result 'warn' -Detail 'netsh winhttp proxy only: not used by interactive downloads, no PAC or authentication; device-wide WinINET is recommended (DO-NET-012)')) }

        else { $checks.Add((New-DDCheck -CheckId 'proxy-scope' -Protocol local -Result 'pass' -Detail "Device-wide proxy ($($px['wininetScope']))")) }

    }

    $checks.Add((Get-DDPacCheck -Network $Network -Checks $checks.ToArray()))

    # ---- local prerequisites -------------------------------------------------------------------------------------

    if ($null -eq $DoSvc) { $checks.Add((New-DDCheck -CheckId 'dosvc-running' -Target 'DoSvc' -Protocol local -Result 'not-collected' -Detail 'DoSvc state could not be read')) }

    elseif ($DoSvc.StartType -eq 'Disabled') {

        $c = New-DDCheck -CheckId 'dosvc-running' -Target 'DoSvc' -Protocol local -Result 'fail' -Detail 'DoSvc start type is Disabled; no amount of policy will make DO work'

        $c['code'] = 'start-disabled'

        $checks.Add($c)

    }

    elseif ($DoSvc.Status -eq 'Running') { $checks.Add((New-DDCheck -CheckId 'dosvc-running' -Target 'DoSvc' -Protocol local -Result 'pass' -Detail "DoSvc running ($($DoSvc.StartType))")) }

    else { $checks.Add((New-DDCheck -CheckId 'dosvc-running' -Target 'DoSvc' -Protocol local -Result 'warn' -Detail "DoSvc is $($DoSvc.Status) ($($DoSvc.StartType)); it is trigger-started and stops when idle")) }

    if ($null -eq $modeNum) { $checks.Add((New-DDCheck -CheckId 'download-mode' -Protocol local -Result 'not-collected' -Detail 'Effective DODownloadMode not available')) }

    elseif ($peeringOff) { $checks.Add((New-DDCheck -CheckId 'download-mode' -Protocol local -Result 'warn' -Detail "DODownloadMode=$modeNum disables peering; peer-to-peer checks are not-applicable")) }

    else { $checks.Add((New-DDCheck -CheckId 'download-mode' -Protocol local -Result 'pass' -Detail "DODownloadMode=$modeNum")) }

    # Defaults when the setting is not configured: 4 GB RAM and 32 GB disk, from the Delivery Optimization reference

    # (https://learn.microsoft.com/windows/deployment/do/waas-delivery-optimization-reference). The Policy CSP page

    # (https://learn.microsoft.com/windows/client-management/mdm/policy-csp-deliveryoptimization) lists 0 for the same settings, so

    # the defaults are a documented assumption; a setting that is configured is always used as set.

    $minRamSet = Get-DDEffectiveValue -Effective $DoEffective -Name 'DOMinRAMAllowedToPeer'; $minRam = $minRamSet; if ($null -eq $minRam) { $minRam = 4 }

    $minDiskSet = Get-DDEffectiveValue -Effective $DoEffective -Name 'DOMinDiskSizeAllowedToPeer'; $minDisk = $minDiskSet; if ($null -eq $minDisk) { $minDisk = 32 }

    $driveText = $(if ($DiskDrive) { "cache drive $DiskDrive" } else { 'cache drive' })

    if ($peeringOff) { $checks.Add((New-DDCheck -CheckId 'resource-eligibility' -Protocol local -Result 'not-applicable' -Detail "Peering is disabled by $modeText")) }

    elseif ($null -eq $RamGB -or $null -eq $DiskGB) { $checks.Add((New-DDCheck -CheckId 'resource-eligibility' -Protocol local -Result 'not-collected' -Detail 'RAM or disk size unavailable')) }

    else {

        $why = New-Object 'System.Collections.Generic.List[string]'

        $ramFail = [double]$RamGB -lt [double]$minRam

        $diskFail = [double]$DiskGB -lt [double]$minDisk

        if ($ramFail) { $why.Add("RAM $RamGB GB < DOMinRAMAllowedToPeer $minRam GB") }

        if ($diskFail) { $why.Add("$driveText $DiskGB GB < DOMinDiskSizeAllowedToPeer $minDisk GB") }

        $assumed = @(@($(if ($null -eq $minRamSet) { 'DOMinRAMAllowedToPeer' }), $(if ($null -eq $minDiskSet) { 'DOMinDiskSizeAllowedToPeer' })) | Where-Object { $_ })

        $assumedText = $(if ($assumed.Count -gt 0) { " ($($assumed -join ' and ') not set: documented default assumed)" } else { '' })

        if ($why.Count -gt 0) {

            $c = New-DDCheck -CheckId 'resource-eligibility' -Protocol local -Result 'fail' -Detail ('Excluded from peering by its own policy: ' + ($why -join '; ') + $assumedText)

            $c['code'] = $(if ($ramFail -and $diskFail) { 'ram-disk' } elseif ($ramFail) { 'ram' } else { 'disk' })

            $checks.Add($c)

        }

        else { $checks.Add((New-DDCheck -CheckId 'resource-eligibility' -Protocol local -Result 'pass' -Detail "RAM $RamGB GB and $driveText $DiskGB GB meet the minimums ($minRam GB / $minDisk GB)")) }

    }

    if ($peeringOff) { $checks.Add((New-DDCheck -CheckId 'adapter-eligibility' -Protocol local -Result 'not-applicable' -Detail "Peering is disabled by $modeText")) }

    elseif ($null -eq $Network) { $checks.Add((New-DDCheck -CheckId 'adapter-eligibility' -Protocol local -Result 'not-collected' -Detail 'adapter facts unavailable')) }

    else {

        $vpnAllowed = Get-DDEffectiveValue -Effective $DoEffective -Name 'DOAllowVPNPeerCaching'

        $why = New-Object 'System.Collections.Generic.List[string]'

        if ($Network['isVpnActive'] -and -not ($vpnAllowed -eq 1)) { $why.Add('VPN active and DOAllowVPNPeerCaching is not enabled') }

        if ($Network['isMetered']) { $why.Add('metered connection') }

        if ($Network['adapterType'] -eq 'Cellular') { $why.Add('cellular adapter') }

        if ($why.Count -gt 0) { $checks.Add((New-DDCheck -CheckId 'adapter-eligibility' -Protocol local -Result 'warn' -Detail ('Peering restricted: ' + ($why -join '; ')))) }

        else { $checks.Add((New-DDCheck -CheckId 'adapter-eligibility' -Protocol local -Result 'pass' -Detail "Adapter type $($Network['adapterType'])")) }

    }

    # ---- Delivery Optimization health (Health.ps1): geo service, cache server in use, DHCP 235/234, rule scope, outbound

    # blocks, cache folder, state file, uploading on battery ---------------------------------------------------------------

    foreach ($c in (New-DDHealthChecks -DoEffective $DoEffective -Network $Network -FirewallRules $rules -Geo $GeoAnswer -CacheHost $CacheResolution -Dhcp $Dhcp `

                -CacheFolder $CacheFolder -Vitals $Vitals -PowerPlan $PowerPlan -ModeNum $modeNum -SkipProbes:$SkipProbes -BatteryCollected $batteryRead)) { $checks.Add($c) }

    if ($SkipProbes) { Add-DDNotCollected -Context $Context -Field 'connectivity' -Reason 'skipped-by-flag' -Detail 'network probes skipped by -SkipConnectivityChecks' }

    $kept = Select-DDMatrixRows -Checks $checks.ToArray() -Max $script:DDMaxMatrixChecks

    if ($kept.Dropped -gt 0) {

        Add-DDNotCollected -Context $Context -Field 'connectivity' -Reason 'error' -Detail "$($kept.Dropped) per-host connectivity row(s) not sent: the matrix is capped at $($script:DDMaxMatrixChecks) checks plus $($script:DDMaxEndpointRows) endpoint-health rows"

    }

    , @(@($kept.Rows) + @($ep | Select-Object -First $script:DDMaxEndpointRows))

}