en-US/about_HPEOneView.530.help.txt

TOPIC
 
    about_HPEOneView.530
 
COPYRIGHT
 
    (C) Copyright 2013-2020 Hewlett Packard Enterprise Development LP
 
LICENSE
 
    Permission is hereby granted, free of charge, to any person obtaining a copy
    of this software and associated documentation files (the "Software"), to deal
    in the Software without restriction, including without limitation the rights
    to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
    copies of the Software, and to permit persons to whom the Software is
    furnished to do so, subject to the following conditions:
 
    The above copyright notice and this permission notice shall be included in
    all copies or substantial portions of the Software.
 
    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
    AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
    OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
    THE SOFTWARE.
 
SHORT DESCRIPTION
 
    PowerShell library for HPE OneView 5.30
 
WHAT'S NEW
 
   Release 5.30.2689.2416
 
      -- [#538] Fixed HPEOneView.Networking.SnmpV3User class to return NA instead of NONE when
         authentication protocol and no privacy protocol setting.
      -- [#552] Fixed duplicate key when attempting to convert from JSON to object with baselines.
 
   Release 5.30.2682.3811
 
     -- [#518] Fixed merge issue where incorect handling of Base64 encoded certificates
        would cause an exception in Add-OVApplianceTrustedCertificate.
     -- [#521] Fixed a casting issue within Get-OVApplianceServiceConsoleAccess when
        service console is disabled.
     -- [#523] Enhanced Get-OVServer to allow searching for server hardware serial number.
     -- [POTENTIAL BREAKING CHANGE] Changed Set-OVTwoFactorAuthentication by removing the
        -EnableEmergencyLocalLogin and -EmergencyLoginAllowType parameters, and moving them to
        both Set-OVLdapDefaultDirectory and Disable-OVLdapLocalLogin Cmdlets.
     -- Fixed Connect-OVMgmt not properly handling embedded NT style domain name of user account,
        and not sending the case sensitive formatted value to the API.
     -- [#528] Added new Start-OVEnclosureApplianceDevice Cmdlet to power on appliance devices
        within an HPE Synergy Frame.
     -- [#534] Fixed Show-OVFirmwareReport mishandling non-existent firmware baselines.
     -- [#539] Fixed New-OVSnmpTrapDestination and the object it returns.
     -- [#540] Fixed New-OVSnmpTrapDestination to handle SNMPv3 Engine ID correctly.
     -- [#548] Fixed Enable-OVDeviceUid and Disable-OVDeviceUid where a resource eTag wasn't
        being passed to the API for Synergy Frames.
     -- Added Get-OVSmtpAlertEmailFilter, Set-OVSmtpAlertEmailFilter and Remove-OVSmtpAlertEmailFilter
        Cmdlets to manage email/SMTP alert filtering.
     -- Fixed New-OVServerProfileTemplate mishandling async task in an error state containing
        more than one taskError message.
 
   Release 5.30.2606.1885
 
     -- Enhanced Install-OVLogicalInterconnectFirmware to support HPE Synergy Orchestrated
        activation, and HPE SAS logical interconnect type.
     -- Added Test-OVRemoteSupportEvent Cmdlet to initiate an HPE OneView Remote Suport
        test case event.
     -- Enhanced New-OVApplianceTrustedCertificate to build and install the certificate chain
        of a provided public SSL certificate or host. The PowerShell client OS must have
        the certificate chain trusted in the operating systems trust store in order to properly
        build the certificate chain.
     -- [#512] Enhanced Set-HPOVUplinkSet by adding -AddNetworkSet and -RemoveNetworkSet parameters.
     -- [#515] Enhanced New-OVNetwork to allow assigning bulk networks to network sets with the
        -VlanRange and -NetworkSet paramters.
     -- [#516] Fixed Get-OVLoginMessage and Set-OVLoginMessage mishandling of an internal variable
        resulting in an unable to transform class exception.
     -- [#519] Enhanced Set-OVApplianceBackupConfig to fetch remote servers public SCP/SFTP key.
     -- [#520] Fixed internal Upload-File function where uploaded hotfixes would not report their
        filesize.
     -- [#521] Fixed a casting issue within Get-OVApplianceServiceConsoleAccess when
        service console is disabled.
     -- [#523] Enhanced Get-OVServer to allow searching for server hardware serial number.
 
   Release 5.30.2560.2096
 
     -- [#506] Fixed Get-OVAddressPool and Get-OVAddressPoolRange not returning IPv6
        pools and ranges.
     -- [#507] Fixed Get-HPOVAlert where Start, End and Timespan values where not being
        handled correctly returning no results from the appliance API.
     -- [#87] Added new Cmdlet to report utilization for server hardware, server profiles
        assigned to server hardware and enclosures with Show-OVUtilization.
     -- Fixed New-OVRack where rack height was not being calculated when only UHeight was provided.
 
   Release 5.20.2552.3262
 
     -- [#505] Updated Show-OVFirmwareReport use of PowerShell operator -Match to
        [Regex]::Match() method to avoid PowerShell treating embedded parenthesis
        characters in the evalutation string, which would result in "not enough ('s"
        error message.
     -- Added iLO helper Cmdlets New-OVServerProfileIloPolicy, New-OVIloLocalUserAccount
        and New-OVIloDirectoryGroup for Server Profile and Server Profile Template Cmdlets.
     -- Fixed New-OVServerProfileTemplate where invalid BIOS Boot Mode was being set for
        unsupported server hardware.
     -- [#499] Addressed Update-OVUserScript Cmdlet not writing to original file.
 
   Release 5.30.2541.2687
 
     -- Enhanced Set-OVManagedSan to perform additional validations to zone and alias policies.
     -- Fixed issue with Set-HPOVSanManager not returning a task object.
     -- [#504] Fixing merge issue with New-HPOVUplinkSet with invalid object property.
     -- Added additional LACP load balancing parameters to New-OVUplinkSet.
 
   Release 5.30.2515.1313
 
     -- [#501] Continued fixing of regression within New-HPOVLogicalEnclosure when Synergy "EBIPA" parameters were added.
 
   Release 5.30.2507.1301
 
     -- Added Cmdlets to configure and manage HPE Synergy Composer2 iLO remote access. They
        are Get-HPOVComposerIloStatus, Enable-HPOVComposerIlo, Disable-HPOVComposerIlo and
        Set-HPOVComposerIlo.
     -- Added multiple HPE hotfix component signature (compsig) file support to Add-OVBaseline.
     -- Enhanced New-HPOVLogicalEnclosure with Ebipa parameters. Now supports a hashtable of
        defined addresses, or autofill for device and/or interconnect bays.
     -- Fixed Remove-HPOVScmbCertificates where a missing HTTP header was necessary.
     -- [#429] Enhanced Get-HPOVRack to filter on Datacenter location.
     -- Fixed issue with Get-OVScmbCertificate when attempting to export a PFX due to cignificant
        X509Certificate2 changes in DotNetCore API.
     -- Fixed condition where created LIG by the library will result in any further edits to
        generate an Internal Error message. Existing LIGs will not be fixed by this change.
        Only LIG resources created with the HPE OneView 5.30 library are impacted.
     -- [#495] Fixed New-OVLogicalInterconnectGroup where the -EnablePauseFloodProtection parameter
        wasn't handled correctly for Synergy configurations.
     -- [#497] Fixed issue with Set-OVRemoteSupport mishandling Insight Online portal registration.
     -- [#499] Fixed issue with Update-OVUserScript with a non-complete regex statement causing
        a runtime exception.
     -- [#500] Fixed Get-OVDataCenter that would generate an exception when Remote Support was enabled.
 
   Release 5.30.2472.1534
 
     -- Initial 5.30 release.
     -- Renamed all Cmdlets with the new library vendor noun prefix. Old prefix was HPOV,
        new prefix is OV. A Cmdlet, Update-OVUserScript, and Sample script, Update-UserScript.ps1,
        as available to help update user ceated, non-digitally signed scripts with the
        updated Cmdlet and C# Class namespace.
 
LONG DESCRIPTION
 
    This library provides HP OneView management capabilities for Windows PowerShell.
    The library can be used as either a CLI or using the core cmdlets to call from
    wrapper scripts. The core cmdlets are:
 
      -- Connect-OVMgmt
      -- Send-OVRequest
      -- New-OVResource
      -- Set-OVResource
      -- Remove-OVResource
 
    A set of sample scripts are also provided, that show how to fully configure an
    HP OneView appliance from the ground up.
 
    For information regarding this project, to request features or report
    issues, please see: https://github.com/HewlettPackard/POSH-HPEOneView/issues
 
 
SEE ALSO
 
    https://github.com/HewlettPackard/POSH-HPEOneView
    https://hpe-docs.gitbook.io/posh-hponeview
    http://hpe.com/info/oneviewcommunity
    Update-Help HPEOneView.530
    Get-Help about_Appliance_Connections
    Get-Help about_Appliance_Connection_Permissions
    Get-Help about_Two_Factor_Authentication
    Get-Help Connect-OVmgmt
    Get-Help Send-OVRequest
    [install_dir]\Samples