Export-Excel.ps1
|
function Export-Excel { <# .SYNOPSIS Export data to an Excel worksheet. .DESCRIPTION Export data to an Excel file and where possible try to convert numbers so Excel recognizes them as numbers instead of text. After all. Excel is a spreadsheet program used for number manipulation and calculations. In case the number conversion is not desired, use the parameter '-NoNumberConversion *'. .PARAMETER Path Path to a new or existing .XLSX file. .PARAMETER ExcelPackage An object representing an Excel Package - usually this is returned by specifying -Passthru allowing multiple commands to work on the same Workbook without saving and reloading each time. .PARAMETER WorksheetName The name of a sheet within the workbook - "Sheet1" by default. .PARAMETER ClearSheet If specified Export-Excel will remove any existing worksheet with the selected name. The Default behaviour is to overwrite cells in this sheet as needed (but leaving non-overwritten ones in place). .PARAMETER Append If specified data will be added to the end of an existing sheet, using the same column headings. .PARAMETER TargetData Data to insert onto the worksheet - this is often provided from the pipeline. .PARAMETER DisplayPropertySet Many (but not all) objects have a hidden property named psStandardmembers with a child property DefaultDisplayPropertySet ; this parameter reduces the properties exported to those in this set. .PARAMETER NoAliasOrScriptPropeties Some objects duplicate existing properties by adding aliases, or have Script properties which take a long time to return a value and slow the export down, if specified this removes these properties .PARAMETER ExcludeProperty Specifies properties which may exist in the target data but should not be placed on the worksheet. .PARAMETER Calculate If specified a recalculation of the worksheet will be requested before saving. .PARAMETER Title Text of a title to be placed in the top left cell. .PARAMETER TitleBold Sets the title in boldface type. .PARAMETER TitleSize Sets the point size for the title. .PARAMETER TitleBackgroundColor Sets the cell background color for the title cell. .PARAMETER TitleFillPattern Sets the fill pattern for the title cell. .PARAMETER Password Sets password protection on the workbook. .PARAMETER IncludePivotTable Adds a Pivot table using the data in the worksheet. .PARAMETER PivotTableName If a Pivot table is created from command line parameters, specificies the name of the new sheet holding the pivot. If Omitted this will be "WorksheetName-PivotTable" .PARAMETER PivotRows Name(s) columns from the spreadhseet which will provide the Row name(s) in a pivot table created from command line parameters. .PARAMETER PivotColumns Name(s) columns from the spreadhseet which will provide the Column name(s) in a pivot table created from command line parameters. .PARAMETER PivotFilter Name(s) columns from the spreadhseet which will provide the Filter name(s) in a pivot table created from command line parameters. .PARAMETER PivotData In a pivot table created from command line parameters, the fields to use in the table body is given as a Hash table in the form ColumnName = Average|Count|CountNums|Max|Min|Product|None|StdDev|StdDevP|Sum|Var|VarP . .PARAMETER NoTotalsInPivot In a pivot table created from command line parameters, prevents the addition of totals to rows and columns. .PARAMETER PivotTableDefinition Instead of describing a single pivot table with mutliple commandline paramters; you can use a HashTable in the form PivotTableName = Definition; Definition is itself a hashtable with Sheet PivotTows, PivotColumns, PivotData, IncludePivotChart and ChartType values. .PARAMETER IncludePivotChart Include a chart with the Pivot table - implies -IncludePivotTable. .PARAMETER ChartType The type for Pivot chart (one of Excel's defined chart types) .PARAMETER NoLegend Exclude the legend from the pivot chart. .PARAMETER ShowCategory Add category labels to the pivot chart. .PARAMETER ShowPercent Add Percentage labels to the pivot chart. .PARAMETER ConditionalFormat One or more conditional formatting rules defined with New-ConditionalFormattingIconSet. .PARAMETER ConditionalText Applies a 'Conditional formatting rule' in Excel on all the cells. When specific conditions are met a rule is triggered. .PARAMETER NoNumberConversion By default we convert all values to numbers if possible, but this isn't always desirable. NoNumberConversion allows you to add exceptions for the conversion. Wildcards (like '*') are allowed. .PARAMETER BoldTopRow Makes the top Row boldface. .PARAMETER NoHeader Does not put field names at the top of columns. .PARAMETER RangeName Makes the data in the worksheet a named range. .PARAMETER TableName Makes the data in the worksheet a table with a name applies a style to it. Name must not contain spaces. .PARAMETER TableStyle Selects the style for the named table - defaults to 'Medium6'. .PARAMETER BarChart Creates a "quick" bar chart using the first text column as labels and the first numeric column as values .PARAMETER ColumnChart Creates a "quick" column chart using the first text column as labels and the first numeric column as values .PARAMETER LineChart Creates a "quick" line chart using the first text column as labels and the first numeric column as values .PARAMETER PieChart Creates a "quick" pie chart using the first text column as labels and the first numeric column as values .PARAMETER ExcelChartDefinition A hash table containing ChartType, Title, NoLegend, ShowCategory, ShowPercent, Yrange, Xrange and SeriesHeader for one or more [non-pivot] charts. .PARAMETER HideSheet Name(s) of Sheet(s) to hide in the workbook, supports wildcards. If all sheets would be hidden, the sheet being worked on will be revealed . .PARAMETER UnHideSheet Name(s) of Sheet(s) to Reveal in the workbook, supports wildcards. .PARAMETER MoveToStart If specified, the worksheet will be moved to the start of the workbook. MoveToStart takes precedence over MoveToEnd, Movebefore and MoveAfter if more than one is specified. .PARAMETER MoveToEnd If specified, the worksheet will be moved to the end of the workbook. (This is the default position for newly created sheets, but this can be used to move existing sheets.) .PARAMETER MoveBefore If specified, the worksheet will be moved before the nominated one (which can be a postion starting from 1, or a name). MoveBefore takes precedence over MoveAfter if both are specified. .PARAMETER MoveAfter If specified, the worksheet will be moved after the nominated one (which can be a postion starting from 1, or a name or *). If * is used, the worksheet names will be examined starting with the first one, and the sheet placed after the last sheet which comes before it alphabetically. .PARAMETER KillExcel Closes Excel - prevents errors writing to the file because Excel has it open. .PARAMETER AutoNameRange Makes each column a named range. .PARAMETER StartRow Row to start adding data. 1 by default. Row 1 will contain the title if any. Then headers will appear (Unless -No header is specified) then the data appears. .PARAMETER StartColumn Column to start adding data - 1 by default. .PARAMETER FreezeTopRow Freezes headers etc. in the top row. .PARAMETER FreezeFirstColumn Freezes titles etc. in the left column. .PARAMETER FreezeTopRowFirstColumn Freezes top row and left column (equivalent to Freeze pane 2,2 ). .PARAMETER FreezePane Freezes panes at specified coordinates (in the form RowNumber , ColumnNumber). .PARAMETER AutoFilter Enables the 'Filter' in Excel on the complete header row. So users can easily sort, filter and/or search the data in the selected column from within Excel. .PARAMETER AutoSize Sizes the width of the Excel column to the maximum width needed to display all the containing data in that cell. .PARAMETER Activate If there is already content in the workbook, a new sheet will not be active UNLESS Activate is specified; if a Pivot table is included it will be the active sheet .PARAMETER Now The 'Now' switch is a shortcut that creates automatically a temporary file, enables 'AutoSize', 'AutoFiler' and 'Show', and opens the file immediately. .PARAMETER NumberFormat Formats all values that can be converted to a number to the format specified. Examples: # integer (not really needed unless you need to round numbers, Excel will use default cell properties). '0' # integer without displaying the number 0 in the cell. '#' # number with 1 decimal place. '0.0' # number with 2 decimal places. '0.00' # number with 2 decimal places and thousand separator. '#,##0.00' # number with 2 decimal places and thousand separator and money symbol. '€#,##0.00' # percentage (1 = 100%, 0.01 = 1%) '0%' # Blue color for positive numbers and a red color for negative numbers. All numbers will be proceeded by a dollar sign '$'. '[Blue]$#,##0.00;[Red]-$#,##0.00' .PARAMETER ReZip If specified, Export-Excel will expand the contents of the .XLSX file (which is multiple files in a zip archive) and rebuilt it. .PARAMETER Show Opens the Excel file immediately after creation. Convenient for viewing the results instantly without having to search for the file first. .PARAMETER ReturnRange If specified, Export-Excel returns the range of added cells in the format "A1:Z100" .PARAMETER PassThru If specified, Export-Excel returns an object representing the Excel package without saving the package first. To save it you need to call the save or Saveas method or send it back to Export-Excel. .EXAMPLE Get-Process | Export-Excel .\Test.xlsx -show Export all the processes to the Excel file 'Test.xlsx' and open the file immediately. .EXAMPLE $ExcelParams = @{ Path = $env:TEMP + '\Excel.xlsx' Show = $true Verbose = $true } Remove-Item -Path $ExcelParams.Path -Force -EA Ignore Write-Output -1 668 34 777 860 -0.5 119 -0.1 234 788 | Export-Excel @ExcelParams -NumberFormat '[Blue]$#,##0.00;[Red]-$#,##0.00' Exports all data to the Excel file 'Excel.xslx' and colors the negative values in 'Red' and the positive values in 'Blue'. It will also add a dollar sign '$' in front of the rounded numbers to two decimal characters behind the comma. .EXAMPLE $ExcelParams = @{ Path = $env:TEMP + '\Excel.xlsx' Show = $true Verbose = $true } Remove-Item -Path $ExcelParams.Path -Force -EA Ignore [PSCustOmobject][Ordered]@{ Date = Get-Date Formula1 = '=SUM(F2:G2)' String1 = 'My String' String2 = 'a' IPAddress = '10.10.25.5' Number1 = '07670' Number2 = '0,26' Number3 = '1.555,83' Number4 = '1.2' Number5 = '-31' PhoneNr1 = '+32 44' PhoneNr2 = '+32 4 4444 444' PhoneNr3 = '+3244444444' } | Export-Excel @ExcelParams -NoNumberConversion IPAddress, Number1 Exports all data to the Excel file 'Excel.xslx' and tries to convert all values to numbers where possible except for 'IPAddress' and 'Number1'. These are stored in the sheet 'as is', without being converted to a number. .EXAMPLE $ExcelParams = @{ Path = $env:TEMP + '\Excel.xlsx' Show = $true Verbose = $true } Remove-Item -Path $ExcelParams.Path -Force -EA Ignore [PSCustOmobject][Ordered]@{ Date = Get-Date Formula1 = '=SUM(F2:G2)' String1 = 'My String' String2 = 'a' IPAddress = '10.10.25.5' Number1 = '07670' Number2 = '0,26' Number3 = '1.555,83' Number4 = '1.2' Number5 = '-31' PhoneNr1 = '+32 44' PhoneNr2 = '+32 4 4444 444' PhoneNr3 = '+3244444444' } | Export-Excel @ExcelParams -NoNumberConversion * Exports all data to the Excel file 'Excel.xslx' as is, no number conversion will take place. This means that Excel will show the exact same data that you handed over to the 'Export-Excel' function. .EXAMPLE $ExcelParams = @{ Path = $env:TEMP + '\Excel.xlsx' Show = $true Verbose = $true } Remove-Item -Path $ExcelParams.Path -Force -EA Ignore Write-Output 489 668 299 777 860 151 119 497 234 788 | Export-Excel @ExcelParams -ConditionalText $( New-ConditionalText -ConditionalType GreaterThan 525 -ConditionalTextColor DarkRed -BackgroundColor LightPink ) Exports data that will have a 'Conditional formatting rule' in Excel on these cells that will show the background fill color in 'LightPink' and the text color in 'DarkRed' when the value is greater then '525'. In case this condition is not met the color will be the default, black text on a white background. .EXAMPLE $ExcelParams = @{ Path = $env:TEMP + '\Excel.xlsx' Show = $true Verbose = $true } Remove-Item -Path $ExcelParams.Path -Force -EA Ignore Get-Service | Select Name, Status, DisplayName, ServiceName | Export-Excel @ExcelParams -ConditionalText $( New-ConditionalText Stop DarkRed LightPink New-ConditionalText Running Blue Cyan ) Export all services to an Excel sheet where all cells have a 'Conditional formatting rule' in Excel that will show the background fill color in 'LightPink' and the text color in 'DarkRed' when the value contains the word 'Stop'. If the value contains the word 'Running' it will have a background fill color in 'Cyan' and a text color 'Blue'. In case none of these conditions are met the color will be the default, black text on a white background. .EXAMPLE $ExcelParams = @{ Path = $env:TEMP + '\Excel.xlsx' Show = $true Verbose = $true } Remove-Item -Path $ExcelParams.Path -Force -EA Ignore $Array = @() $Obj1 = [PSCustomObject]@{ Member1 = 'First' Member2 = 'Second' } $Obj2 = [PSCustomObject]@{ Member1 = 'First' Member2 = 'Second' Member3 = 'Third' } $Obj3 = [PSCustomObject]@{ Member1 = 'First' Member2 = 'Second' Member3 = 'Third' Member4 = 'Fourth' } $Array = $Obj1, $Obj2, $Obj3 $Array | Out-GridView -Title 'Not showing Member3 and Member4' $Array | Update-FirstObjectProperties | Export-Excel @ExcelParams -WorksheetName Numbers Updates the first object of the array by adding property 'Member3' and 'Member4'. Afterwards. all objects are exported to an Excel file and all column headers are visible. .EXAMPLE Get-Process | Export-Excel .\test.xlsx -WorksheetName Processes -IncludePivotTable -Show -PivotRows Company -PivotData PM .EXAMPLE Get-Process | Export-Excel .\test.xlsx -WorksheetName Processes -ChartType PieExploded3D -IncludePivotChart -IncludePivotTable -Show -PivotRows Company -PivotData PM .EXAMPLE Get-Service | Export-Excel 'c:\temp\test.xlsx' -Show -IncludePivotTable -PivotRows status -PivotData @{status='count'} .EXAMPLE $pt = [ordered]@{} $pt.pt1=@{ SourceWorkSheet = 'Sheet1'; PivotRows = 'Status' PivotData = @{'Status'='count'} IncludePivotChart = $true ChartType = 'BarClustered3D' } $pt.pt2=@{ SourceWorkSheet = 'Sheet2'; PivotRows = 'Company' PivotData = @{'Company'='count'} IncludePivotChart = $true ChartType = 'PieExploded3D' } Remove-Item -Path .\test.xlsx Get-Service | Select-Object -Property Status,Name,DisplayName,StartType | Export-Excel -Path .\test.xlsx -AutoSize Get-Process | Select-Object -Property Name,Company,Handles,CPU,VM | Export-Excel -Path .\test.xlsx -AutoSize -WorksheetName 'sheet2' Export-Excel -Path .\test.xlsx -PivotTableDefinition $pt -Show This example defines two pivot tables. Then it puts Service data on Sheet1 with one call to Export-Excel and Process Data on sheet2 with a second call to Export-Excel. The thrid and final call adds the two pivot tables and opens the spreadsheet in Excel. .EXAMPLE Remove-Item -Path .\test.xlsx $excel = Get-Service | Select-Object -Property Status,Name,DisplayName,StartType | Export-Excel -Path .\test.xlsx -PassThru $excel.Workbook.Worksheets["Sheet1"].Row(1).style.font.bold = $true $excel.Workbook.Worksheets["Sheet1"].Column(3 ).width = 29 $excel.Workbook.Worksheets["Sheet1"].Column(3 ).Style.wraptext = $true $excel.Save() $excel.Dispose() Start-Process .\test.xlsx This example uses -passthrough - put service information into sheet1 of the work book and saves the excelPackageObject in $Excel. It then uses the package object to apply formatting, and then saves the workbook and disposes of the object before loading the document in Excel. .EXAMPLE Remove-Item -Path .\test.xlsx -ErrorAction Ignore $excel = Get-Process | Select-Object -Property Name,Company,Handles,CPU,PM,NPM,WS | Export-Excel -Path .\test.xlsx -ClearSheet -WorksheetName "Processes" -PassThru $sheet = $excel.Workbook.Worksheets["Processes"] $sheet.Column(1) | Set-Format -Bold -AutoFit $sheet.Column(2) | Set-Format -Width 29 -WrapText $sheet.Column(3) | Set-Format -HorizontalAlignment Right -NFormat "#,###" Set-Format -Address $sheet.Cells["E1:H1048576"] -HorizontalAlignment Right -NFormat "#,###" Set-Format -Address $sheet.Column(4) -HorizontalAlignment Right -NFormat "#,##0.0" -Bold Set-Format -Address $sheet.Row(1) -Bold -HorizontalAlignment Center Add-ConditionalFormatting -WorkSheet $sheet -Range "D2:D1048576" -DataBarColor Red Add-ConditionalFormatting -WorkSheet $sheet -Range "G2:G1048576" -RuleType GreaterThan -ConditionValue "104857600" -ForeGroundColor Red foreach ($c in 5..9) {Set-Format -Address $sheet.Column($c) -AutoFit } Export-Excel -ExcelPackage $excel -WorksheetName "Processes" -IncludePivotChart -ChartType ColumnClustered -NoLegend -PivotRows company -PivotData @{'Name'='Count'} -Show This a more sophisticated version of the previous example showing different ways of using Set-Format, and also adding conditional formatting. In the final command a Pivot chart is added and the workbook is opened in Excel. .LINK https://github.com/dfinke/ImportExcel #> [CmdletBinding(DefaultParameterSetName = 'Default')] [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword", "")] Param( [Parameter(ParameterSetName = "Default", Position = 0)] [Parameter(ParameterSetName = "Table" , Position = 0)] [String]$Path, [Parameter(Mandatory = $true, ParameterSetName = "PackageDefault")] [Parameter(Mandatory = $true, ParameterSetName = "PackageTable")] [OfficeOpenXml.ExcelPackage]$ExcelPackage, [Parameter(ValueFromPipeline = $true)] $TargetData, [Switch]$Calculate, [Switch]$Show, [String]$WorksheetName = 'Sheet1', [String]$Password, [switch]$ClearSheet, [switch]$Append, [String]$Title, [OfficeOpenXml.Style.ExcelFillStyle]$TitleFillPattern = 'Solid', [Switch]$TitleBold, [Int]$TitleSize = 22, [System.Drawing.Color]$TitleBackgroundColor, [Switch]$IncludePivotTable, [String]$PivotTableName, [String[]]$PivotRows, [String[]]$PivotColumns, $PivotData, [String[]]$PivotFilter, [Switch]$PivotDataToColumn, [Hashtable]$PivotTableDefinition, [Switch]$IncludePivotChart, [OfficeOpenXml.Drawing.Chart.eChartType]$ChartType = 'Pie', [Switch]$NoLegend, [Switch]$ShowCategory, [Switch]$ShowPercent, [Switch]$AutoSize, [Switch]$NoClobber, [Switch]$FreezeTopRow, [Switch]$FreezeFirstColumn, [Switch]$FreezeTopRowFirstColumn, [Int[]]$FreezePane, [Parameter(ParameterSetName = 'Default')] [Parameter(ParameterSetName = 'PackageDefault')] [Switch]$AutoFilter, [Switch]$BoldTopRow, [Switch]$NoHeader, [ValidateScript( { if (-not $_) { throw 'RangeName is null or empty.' } elseif ($_[0] -notmatch '[a-z]') { throw 'RangeName starts with an invalid character.' } else { $true } })] [String]$RangeName, [ValidateScript( { if (-not $_) { throw 'Tablename is null or empty.' } elseif ($_[0] -notmatch '[a-z]') { throw 'Tablename starts with an invalid character.' } else { $true } })] [Parameter(ParameterSetName = 'Table' , Mandatory = $true, ValueFromPipelineByPropertyName)] [Parameter(ParameterSetName = 'PackageTable' , Mandatory = $true, ValueFromPipelineByPropertyName)] [String]$TableName, [Parameter(ParameterSetName = 'Table')] [Parameter(ParameterSetName = 'PackageTable')] [OfficeOpenXml.Table.TableStyles]$TableStyle = 'Medium6', [Switch]$Barchart, [Switch]$PieChart, [Switch]$LineChart , [Switch]$ColumnChart , [Object[]]$ExcelChartDefinition, [String[]]$HideSheet, [String[]]$UnHideSheet, [Switch]$MoveToStart, [Switch]$MoveToEnd, $MoveBefore , $MoveAfter , [Switch]$KillExcel, [Switch]$AutoNameRange, [Int]$StartRow = 1, [Int]$StartColumn = 1, [Switch]$PassThru, [String]$Numberformat = 'General', [string[]]$ExcludeProperty, [Switch]$NoAliasOrScriptPropeties, [Switch]$DisplayPropertySet, [String[]]$NoNumberConversion, [Object[]]$ConditionalFormat, [Object[]]$ConditionalText, [ScriptBlock]$CellStyleSB, #If there is already content in the workbook the sheet with the Pivot table will not be active UNLESS Activate is specified [switch]$Activate, [Parameter(ParameterSetName = 'Now')] [Switch]$Now, [Switch]$ReturnRange, #By default Pivot tables have Totals for each Row (on the right) and for each column at the bottom. This allows just one or neither to be selected. [ValidateSet("Both","Columns","Rows","None")] [String]$PivotTotals = "Both", #Included for compatibility - equivalent to -PivotTotals "None" [Switch]$NoTotalsInPivot, [Switch]$ReZip ) Begin { $numberRegex = [Regex]'\d' function Add-CellValue { <# .SYNOPSIS Save a value in an Excel cell. .DESCRIPTION DateTime objects are always converted to a short DateTime format in Excel. When Excel loads the file, it applies the local format for dates. And formulas are always saved as formulas. URIs are set as hyperlinks in the file. Numerical values will be converted to numbers as defined in the regional settings of the local system. In case the parameter 'NoNumberConversion' is used, we don't convert to number and leave the value 'as is'. In case of conversion failure, we also leave the value 'as is'. #> Param ( $TargetCell, $CellValue ) #The write-verbose commands have been commented out below - even if verbose is silenced they cause a significiant performance impact and if it's on they will cause a flood of messages. Switch ($CellValue) { { $_ -is [DateTime]} { # Save a date with one of Excel's built in formats format $TargetCell.Value = $_ $TargetCell.Style.Numberformat.Format = 'm/d/yy h:mm' # This is not a custom format, but a preset recognized as date and localized. #Write-Verbose "Cell '$Row`:$ColumnIndex' header '$Name' add value '$_' as date" break } { $_ -is [TimeSpan]} { #Save a timespans with a built in format for elapsed hours, minutes and seconds $TargetCell.Value = $_ $TargetCell.Style.Numberformat.Format = '[h]:mm:ss' break } { $_ -is [System.ValueType]} { # Save numerics, setting format if need be. $TargetCell.Value = $_ if ($setNumformat) {$targetCell.Style.Numberformat.Format = $Numberformat } #Write-Verbose "Cell '$Row`:$ColumnIndex' header '$Name' add value '$_' as value" break } {($_ -is [String]) -and ($_[0] -eq '=')} { #region Save an Excel formula - we need = to spot the formula but the EPPLUS won't like it if we include it (Excel doesn't care if is there or not) $TargetCell.Formula = ($_ -replace '^=','') if ($setNumformat) {$targetCell.Style.Numberformat.Format = $Numberformat } #Write-Verbose "Cell '$Row`:$ColumnIndex' header '$Name' add value '$_' as formula" break } { [System.Uri]::IsWellFormedUriString($_ , [System.UriKind]::Absolute) } { # Save a hyperlink : internal links can be in the form xl://sheet!E419 (use A1 as goto sheet), or xl://RangeName if ($_ -match "^xl://internal/") { $referenceAddress = $_ -replace "^xl://internal/" , "" $display = $referenceAddress -replace "!A1$" , "" $h = New-Object -TypeName OfficeOpenXml.ExcelHyperLink -ArgumentList $referenceAddress , $display $TargetCell.HyperLink = $h } else {$TargetCell.HyperLink = $_ } #$TargetCell.Value = $_.AbsoluteUri $TargetCell.Style.Font.Color.SetColor([System.Drawing.Color]::Blue) $TargetCell.Style.Font.UnderLine = $true #Write-Verbose "Cell '$Row`:$ColumnIndex' header '$Name' add value '$($_.AbsoluteUri)' as Hyperlink" break } {( $NoNumberConversion -and ( ($NoNumberConversion -contains $Name) -or ($NoNumberConversion -eq '*'))) } { #Save text without it to converting to number $TargetCell.Value = $_ #Write-Verbose "Cell '$Row`:$ColumnIndex' header '$Name' add value '$($TargetCell.Value)' unconverted" break } Default { #Save a value as a number if possible $number = $null if ($numberRegex.IsMatch($_) -and [Double]::TryParse($_, [System.Globalization.NumberStyles]::Any, [System.Globalization.NumberFormatInfo]::CurrentInfo, [Ref]$number)) { # as simpler version using [Double]::TryParse( $_ , [ref]$number)) was found to cause problems reverted back to the longer version $TargetCell.Value = $number if ($setNumformat) {$targetCell.Style.Numberformat.Format = $Numberformat } #Write-Verbose "Cell '$Row`:$ColumnIndex' header '$Name' add value '$($TargetCell.Value)' as number converted from '$_' with format '$Numberformat'" } else { $TargetCell.Value = $_ #Write-Verbose "Cell '$Row`:$ColumnIndex' header '$Name' add value '$($TargetCell.Value)' as string" } break } } } Try { $script:Header = $null if ($Append -and $ClearSheet) {throw "You can't use -Append AND -ClearSheet."} if ($PSBoundParameters.Keys.Count -eq 0 -Or $Now) { $Path = [System.IO.Path]::GetTempFileName() -replace '\.tmp', '.xlsx' $Show = $true $AutoSize = $true if (!$TableName) { $AutoFilter = $true } } if ($ExcelPackage) { $pkg = $ExcelPackage $Path = $pkg.File } Else { $pkg = Open-ExcelPackage -Path $Path -Create -KillExcel:$KillExcel -Password:$Password} } Catch {throw "Could not open Excel Package $path"} if ($NoClobber) {Write-Warning -Message "-NoClobber parameter is no longer used" } Try { $params = @{WorksheetName=$WorksheetName} foreach ($p in @("ClearSheet", "MoveToStart", "MoveToEnd", "MoveBefore", "MoveAfter", "Activate")) {if ($PSBoundParameters[$p]) {$params[$p] = $PSBoundParameters[$p]}} $ws = $pkg | Add-WorkSheet @params if ($ws.Name -ne $WorksheetName) { Write-Warning -Message "The Worksheet name has been changed from $WorksheetName to $($ws.Name), this may cause errors later." $WorksheetName = $ws.Name } } Catch {throw "Could not get worksheet $worksheetname"} try { foreach ($format in $ConditionalFormat ) { switch ($format.formatter) { "ThreeIconSet" {Add-ConditionalFormatting -WorkSheet $ws -ThreeIconsSet $format.IconType -range $format.range -reverse:$format.reverse } "FourIconSet" {Add-ConditionalFormatting -WorkSheet $ws -FourIconsSet $format.IconType -range $format.range -reverse:$format.reverse } "FiveIconSet" {Add-ConditionalFormatting -WorkSheet $ws -FiveIconsSet $format.IconType -range $format.range -reverse:$format.reverse } } } } catch {throw "Error applying confitional formatting to worksheet"} try { if ($Append -and $ws.Dimension) { #if there is a title or anything else above the header row, append needs to be combined wih a suitable startrow parameter $headerRange = $ws.Dimension.Address -replace "\d+$", $StartRow #using a slightly odd syntax otherwise header ends up as a 2D array $ws.Cells[$headerRange].Value | ForEach-Object -Begin {$Script:header = @()} -Process {$Script:header += $_ } #if we did not get AutoNameRange, but headers have ranges of the same name make autoNameRange True, otherwise make it false if (-not $AutoNameRange) { $AutoNameRange = $true ; foreach ($h in $header) {if ($ws.names.name -notcontains $h) {$AutoNameRange = $false} } } #if we did not get a Rangename but there is a Range which covers the active part of the sheet, set Rangename to that. if (-not $RangeName -and $ws.names.where({$_.name[0] -match '[a-z]'})) { $theRange = $ws.names.where({ ($_.Name[0] -match '[a-z]' ) -and ($_.Start.Row -eq $StartRow) -and ($_.Start.Column -eq $StartColumn) -and ($_.End.Row -eq $ws.Dimension.End.Row) -and ($_.End.Column -eq $ws.Dimension.End.column) } , 'First', 1) if ($theRange) {$rangename = $theRange.name} } #if we did not get a table name but there is a table which covers the active part of the sheet, set table name to that, and don't do anything with autofilter if (-not $TableName -and $ws.Tables.Where({$_.address.address -eq $ws.dimension.address})) { $TableName = $ws.Tables.Where({$_.address.address -eq $ws.dimension.address},'First', 1).Name $AutoFilter = $false } #if we did not get $autofilter but a filter range is set and it covers the right area, set autofilter to true elseif (-not $AutoFilter -and $ws.Names["_xlnm._FilterDatabase"]) { if ( ($ws.Names["_xlnm._FilterDatabase"].Start.Row -eq $StartRow) -and ($ws.Names["_xlnm._FilterDatabase"].Start.Column -eq $StartColumn) -and ($ws.Names["_xlnm._FilterDatabase"].End.Row -eq $ws.Dimension.End.Row) -and ($ws.Names["_xlnm._FilterDatabase"].End.Column -eq $ws.Dimension.End.Column) ) {$AutoFilter = $true} } $row = $ws.Dimension.End.Row Write-Debug -Message ("Appending: headers are " + ($script:Header -join ", ") + " Start row is $row") } elseif ($Title) { #Can only add a title if not appending! $Row = $StartRow $ws.Cells[$Row, $StartColumn].Value = $Title $ws.Cells[$Row, $StartColumn].Style.Font.Size = $TitleSize if ($TitleBold) { #Set title to Bold face font if -TitleBold was specified. #Otherwise the default will be unbolded. $ws.Cells[$Row, $StartColumn].Style.Font.Bold = $True } if ($TitleBackgroundColor ) { $ws.Cells[$Row, $StartColumn].Style.Fill.PatternType = $TitleFillPattern $ws.Cells[$Row, $StartColumn].Style.Fill.BackgroundColor.SetColor($TitleBackgroundColor) } $Row ++ ; $startRow ++ } else { $Row = $StartRow } $ColumnIndex = $StartColumn $Numberformat = Expand-NumberFormat -NumberFormat $Numberformat if ($row -le 2 -and $ColumnIndex -eq 1 -and $Numberformat -ne $ws.Cells.Style.Numberformat.Format) { $ws.Cells.Style.Numberformat.Format = $Numberformat $setNumformat = $false } else { $setNumformat = ($Numberformat -ne $ws.Cells.Style.Numberformat.Format) } $firstTimeThru = $true $isDataTypeValueType = $false } Catch { if ($AlreadyExists) { #Is this set anywhere ? throw "Failed exporting worksheet '$WorksheetName' to '$Path': The worksheet '$WorksheetName' already exists." } else { throw "Failed preparing to export to worksheet '$WorksheetName' to '$Path': $_" } } } Process { if ($TargetData) { Try { if ($firstTimeThru) { $firstTimeThru = $false $isDataTypeValueType = $TargetData.GetType().name -match 'string|timespan|datetime|bool|byte|char|decimal|double|float|int|long|sbyte|short|uint|ulong|ushort' if ($isDataTypeValueType -and -not $Append) {$row -= 1} #row incremented before adding values, so it is set to the number of rows inserted at the end Write-Debug "DataTypeName is '$($TargetData.GetType().name)' isDataTypeValueType '$isDataTypeValueType'" } if ($isDataTypeValueType) { $ColumnIndex = $StartColumn $Row += 1 try {Add-CellValue -TargetCell $ws.Cells[$Row, $ColumnIndex] -CellValue $TargetData} catch {Write-Warning "Could not insert value at Row $Row. "} } else { #region Add headers - if we are appending, or we have been through here once already we will have the headers if (-not $script:Header) { $ColumnIndex = $StartColumn if ($DisplayPropertySet -and $TargetData.psStandardmembers.DefaultDisplayPropertySet.ReferencedPropertyNames) { $script:Header = $TargetData.psStandardmembers.DefaultDisplayPropertySet.ReferencedPropertyNames.Where( {$_ -notin $ExcludeProperty}) } else { if ($NoAliasOrScriptPropeties) {$propType = "Property"} else {$propType = "*"} $script:Header = $TargetData.PSObject.Properties.where( {$_.MemberType -like $propType}).Name } foreach ($exclusion in $ExcludeProperty) {$script:Header = $script:Header -notlike $exclusion} if ($NoHeader) { # Don't push the headers to the spreadsheet $Row -= 1 } else { foreach ($Name in $script:Header) { $ws.Cells[$Row, $ColumnIndex].Value = $Name Write-Verbose "Cell '$Row`:$ColumnIndex' add header '$Name'" $ColumnIndex += 1 } } } #endregion #region Add non header values $Row += 1 $ColumnIndex = $StartColumn foreach ($Name in $script:Header) { try {Add-CellValue -TargetCell $ws.Cells[$Row, $ColumnIndex] -CellValue $TargetData.$Name} catch {Write-Warning -Message "Could not insert the $Name property at Row $Row, Column $Column"} $ColumnIndex += 1 } $ColumnIndex -= 1 # column index will be the last column whether isDataTypeValueType was true or false #endregion } } Catch { throw "Failed exporting data to worksheet '$WorksheetName' to '$Path': $_" } } } End { if ($firstTimeThru) { $LastRow = $ws.Dimension.End.Row $LastCol = $ws.Dimension.End.Column $endAddress = $ws.Dimension.End.Address } else { $LastRow = $Row $LastCol = $ColumnIndex $endAddress = [OfficeOpenXml.ExcelAddress]::GetAddress($LastRow , $LastCol) } $startAddress = [OfficeOpenXml.ExcelAddress]::GetAddress($StartRow, $StartColumn) $dataRange = "{0}:{1}" -f $startAddress, $endAddress Write-Debug "Data Range '$dataRange'" if ($AutoNameRange) { Try { if (-not $script:header) { # if there aren't any headers, use the the first row of data to name the ranges: this is the last point that headers will be used. $headerRange = $ws.Dimension.Address -replace "\d+$", $StartRow #using a slightly odd syntax otherwise header ends up as a 2D array $ws.Cells[$headerRange].Value | ForEach-Object -Begin {$Script:header = @()} -Process {$Script:header += $_ } #if there is no header start the range at $startRow $targetRow = $StartRow } else { #if there is a header, start the range and the next row down. $targetRow = $StartRow + 1 } #Dimension.start.row always seems to be one so we work out the target row #, but start.column is the first populated one and .Columns is the count of populated ones. # if we have 5 columns from 3 to 8, headers are numbered 0..4, so that is in the for loop and used for getting the name... # but we have to add the start column on when referencing positions foreach ($c in 0..($LastCol - $StartColumn)) { $targetRangeName = $script:Header[$c] -replace '\W' , '_' $targetColumn = $c + $StartColumn $theRange = $ws.Cells[$targetRow, $targetColumn, $LastRow , $targetColumn ] if ($ws.names[$targetRangeName]) { $ws.names[$targetRangeName].Address = $theRange.FullAddressAbsolute } else {$ws.Names.Add($targetRangeName, $theRange) | Out-Null } if ([OfficeOpenXml.FormulaParsing.ExcelUtilities.ExcelAddressUtil]::IsValidAddress($targetRangeName)) { Write-Warning "AutoNameRange: Property name '$targetRangeName' is also a valid Excel address and may cause issues. Consider renaming the property name." } } } Catch {Write-Warning -Message "Failed adding named ranges to worksheet '$WorksheetName': $_" } } if ($RangeName) { try { if ($RangeName -match "\W") { Write-Warning -Message "At least one character in $RangeName is illegal in a range name and will be replaced with '_' . " $RangeName = $RangeName -replace '\W', '_' } #If named range exists, update it, else create it if ($ws.Names[$RangeName]) { $ws.Names[$rangename].Address = $ws.Cells[$dataRange].FullAddressAbsolute } else {$ws.Names.Add($RangeName, $ws.Cells[$dataRange]) | Out-Null } } Catch { Write-Warning -Message "Failed adding range '$RangeName' to worksheet '$WorksheetName': $_" } } if ($TableName) { try { if ($TableName -match "\W") { Write-Warning -Message "At least one character in $TableName is illegal in a table name and will be replaced with '_' . " $TableName = $TableName -replace '\W', '_' } #if the table exists, update it. if ($ws.Tables[$TableName]) { $ws.Tables[$TableName].TableXml.table.ref = $dataRange $ws.Tables[$TableName].TableStyle = $TableStyle } else { $tbl = $ws.Tables.Add($ws.Cells[$dataRange], $TableName) $tbl.TableStyle = $TableStyle } Write-Verbose -Message "Defined table '$TableName' at $($targetRange.Address)" } catch {Write-Warning -Message "Failed adding table '$TableName' to worksheet '$WorksheetName': $_"} } if ($AutoFilter) { try { $ws.Cells[$dataRange].AutoFilter = $true Write-Verbose -Message "Enabeld autofilter. " } catch {Write-Warning -Message "Failed adding autofilter to worksheet '$WorksheetName': $_"} } if ($PivotTableDefinition) { foreach ($item in $PivotTableDefinition.GetEnumerator()) { $params = $item.value if ($Activate) {$params.Activate = $true } if ($params.keys -notcontains "SourceRange" -and ($params.Keys -notcontains "SourceWorkSheet" -or $params.SourceWorkSheet -eq $WorksheetName)) {$params.SourceRange = $dataRange} if ($params.Keys -notcontains "SourceWorkSheet") {$params.SourceWorkSheet = $ws } if ($params.Keys -notcontains "NoTotalsInPivot" -and $NoTotalsInPivot ) {$params.PivotTotals = "None"} if ($params.Keys -notcontains "PivotTotals" -and $PivotTotals ) {$params.PivotTotals = $PivotTotals} if ($params.Keys -notcontains "PivotDataToColumn" -and $PivotDataToColumn) {$params.PivotDataToColumn = $true} Add-PivotTable -ExcelPackage $pkg -PivotTableName $item.key @Params } } if ($IncludePivotTable -or $IncludePivotChart) { $params = @{ "SourceRange" = $dataRange } if ($PivotTableName) {$params.PivotTableName = $PivotTableName} else {$params.PivotTableName = $WorksheetName + 'PivotTable'} if ($Activate) {$params.Activate = $true } if ($PivotFilter) {$params.PivotFilter = $PivotFilter} if ($PivotRows) {$params.PivotRows = $PivotRows} if ($PivotColumns) {$Params.PivotColumns = $PivotColumns} if ($PivotData) {$Params.PivotData = $PivotData} if ($NoTotalsInPivot) {$params.PivotTotals = "None" } Elseif ($PivotTotals) {$params.PivotTotals = $PivotTotals} if ($PivotDataToColumn) {$params.PivotDataToColumn = $true} if ($IncludePivotChart) { $params.IncludePivotChart = $true $Params.ChartType = $ChartType if ($ShowCategory) {$params.ShowCategory = $true} if ($ShowPercent) {$params.ShowPercent = $true} if ($NoLegend) {$params.NoLegend = $true} } Add-PivotTable -ExcelPackage $pkg -SourceWorkSheet $ws @params } try { #Allow single switch or two seperate ones. if ($FreezeTopRowFirstColumn -or ($FreezeTopRow -and $FreezeFirstColumn)) { $ws.View.FreezePanes(2, 2) Write-Verbose -Message "Froze top row and first column" } elseif ($FreezeTopRow) { $ws.View.FreezePanes(2, 1) Write-Verbose -Message "Froze top row" } elseif ($FreezeFirstColumn) { $ws.View.FreezePanes(1, 2) Write-Verbose -Message "Froze first column" } if ($FreezePane) { $freezeRow, $freezeColumn = $FreezePane if (-not $freezeColumn -or $freezeColumn -eq 0) { $freezeColumn = 1 } if ($freezeRow -gt 1) { $ws.View.FreezePanes($freezeRow, $freezeColumn) Write-Verbose -Message "Froze pandes at row $freezeRow and column $FreezeColumn" } } } catch {Write-Warning -Message "Failed adding Freezing the panes in worksheet '$WorksheetName': $_"} if ($BoldTopRow) { #it sets bold as far as there are populated cells: for whole row could do $ws.row($x).style.font.bold = $true try { if ($Title) { $range = $ws.Dimension.Address -replace '\d+', ($StartRow + 1) } else { $range = $ws.Dimension.Address -replace '\d+', $StartRow } $ws.Cells[$range].Style.Font.Bold = $true Write-Verbose -Message "Set $range font style to bold." } catch {Write-Warning -Message "Failed setting the top row to bold in worksheet '$WorksheetName': $_"} } if ($AutoSize) { try { $ws.Cells.AutoFitColumns() Write-Verbose -Message "Auto-sized columns" } catch { Write-Warning -Message "Failed autosizing columns of worksheet '$WorksheetName': $_"} } foreach ($Sheet in $HideSheet) { try { $pkg.Workbook.WorkSheets.Where({$_.Name -like $sheet}) | ForEach-Object { $_.Hidden = 'Hidden' Write-verbose -Message "Sheet '$($_.Name)' Hidden." } } catch {Write-Warning -Message "Failed hiding worksheet '$sheet': $_"} } foreach ($Sheet in $UnHideSheet) { try { $pkg.Workbook.WorkSheets.Where({$_.Name -like $sheet}) | ForEach-Object { $_.Hidden = 'Visible' Write-verbose -Message "Sheet '$($_.Name)' shown" } } catch {Write-Warning -Message "Failed showing worksheet '$sheet': $_"} } if (-not $pkg.Workbook.Worksheets.Where({$_.Hidden -eq 'visible'})) { Write-Verbose -Message "No Sheets were left visible, making $WorksheetName visible" $ws.Hidden = 'Visible' } foreach ($chartDef in $ExcelChartDefinition) { $params = @{} $chartDef.PSObject.Properties | ForEach-Object {if ( $null -ne $_.value) {$params[$_.name] = $_.value}} Add-ExcelChart -Worksheet $ws @params } if ($Barchart -or $PieChart -or $LineChart -or $ColumnChart) { if ($NoHeader) {$FirstDataRow = $startRow} else {$FirstDataRow = $startRow + 1 } $range = [OfficeOpenXml.ExcelAddress]::GetAddress($FirstDataRow, $startColumn, $FirstDataRow, $lastCol ) $xCol = $ws.cells[$range] | Where-Object {$_.value -is [string] } | ForEach-Object {$_.start.column} | Sort-Object | Select-Object -first 1 $yCol = $ws.cells[$range] | Where-Object {$_.value -is [valueType] } | ForEach-Object {$_.start.column} | Sort-Object | Select-Object -first 1 $params = @{ XRange = [OfficeOpenXml.ExcelAddress]::GetAddress($FirstDataRow, $xcol , $lastrow, $xcol) YRange = [OfficeOpenXml.ExcelAddress]::GetAddress($FirstDataRow, $ycol , $lastrow, $ycol) Title = ""; Column = ($lastCol +1) ; Width = 800 } if ($ShowPercent) {$params["ShowPercent"] = $true} if ($ShowCategory) {$params["ShowCategory"] = $true} if ($NoLegend) {$params["NoLegend"] = $true} if (-not $NoHeader) {$params["SeriesHeader"] = $ws.Cells[$startRow, $YCol].Value} if ($ColumnChart) {$Params["chartType"] = "ColumnStacked" } elseif ($Barchart) {$Params["chartType"] = "BarStacked" } elseif ($PieChart) {$Params["chartType"] = "PieExploded3D" } elseif ($LineChart) {$Params["chartType"] = "Line" } Add-ExcelChart -Worksheet $ws @params } foreach ($ct in $ConditionalText) { try { $cfParams = @{RuleType = $ct.ConditionalType; ConditionValue = $ct.text ; BackgroundColor = $ct.BackgroundColor; BackgroundPattern = $ct.PatternType ; ForeGroundColor = $ct.ConditionalTextColor } if ($ct.Range) {$cfParams.range = $ct.range} else { $cfParams.Range = $ws.Dimension.Address } Add-ConditionalFormatting -WorkSheet $ws @cfParams Write-Verbose -Message "Added conditional formatting to range $($ct.range)" } catch {Write-Warning -Message "Failed adding conditional formatting to worksheet '$WorksheetName': $_"} } if ($CellStyleSB) { try { $TotalRows = $ws.Dimension.Rows $LastColumn = $ws.Dimension.Address -replace "^.*:(\w*)\d+$" , '$1' & $CellStyleSB $ws $TotalRows $LastColumn } catch {Write-Warning -Message "Failed processing CellStyleSB in worksheet '$WorksheetName': $_"} } if ($Calculate) { try { [OfficeOpenXml.CalculationExtension]::Calculate($ws) } Catch { Write-Warning "One or more errors occured while calculating, save will continue, but there may be errors in the workbook."} } if ($Password) { try { $ws.Protection.SetPassword($Password) Write-Verbose -Message "Set password on workbook" } catch {throw "Failed setting password for worksheet '$WorksheetName': $_"} } if ($PassThru) { $pkg } else { if ($ReturnRange) {$dataRange } if ($Password) { $pkg.Save($Password) } else { $pkg.Save() } Write-Verbose -Message "Saved workbook $($pkg.File)" if ($ReZip) { Write-Verbose -Message "Re-Zipping $($pkg.file) using .NET ZIP library" try { Add-Type -AssemblyName "System.IO.Compression.Filesystem" -ErrorAction stop } catch { Write-Error "The -ReZip parameter requires .NET Framework 4.5 or later to be installed. Recommend to install Powershell v4+" continue } try { $TempZipPath = Join-Path -Path ([System.IO.Path]::GetTempPath()) -ChildPath ([System.IO.Path]::GetRandomFileName()) [io.compression.zipfile]::ExtractToDirectory($pkg.File, $TempZipPath) | Out-Null Remove-Item $pkg.File -Force [io.compression.zipfile]::CreateFromDirectory($TempZipPath, $pkg.File) | Out-Null } catch {throw "Error resizipping $path : $_"} } $pkg.Dispose() if ($Show) { Invoke-Item $Path } } } } function New-PivotTableDefinition { <# .Synopsis Creates Pivot table definitons for Export-Excel .Description Export-Excel allows a single Pivot table to be defined using the parameters -IncludePivotTable, -PivotColumns -PivotRows, =PivotData, -PivotFilter, -PivotTotals, -PivotDataToColumn, -IncludePivotChart and -ChartType. Its -PivotTableDefintion paramater allows multiple pivot tables to be defined, with additional parameters. New-PivotTableDefinition is a convenient way to build these definitions. .Example $pt = New-PivotTableDefinition -PivotTableName "PT1" -SourceWorkSheet "Sheet1" -PivotRows "Status" -PivotData @{Status='Count' } -PivotFilter 'StartType' -IncludePivotChart -ChartType BarClustered3D $Pt += New-PivotTableDefinition -PivotTableName "PT2" -SourceWorkSheet "Sheet2" -PivotRows "Company" -PivotData @{Company='Count'} -IncludePivotChart -ChartType PieExploded3D -ShowPercent -ChartTitle "Breakdown of processes by company" Get-Service | Select-Object -Property Status,Name,DisplayName,StartType | Export-Excel -Path .\test.xlsx -AutoSize Get-Process | Select-Object -Property Name,Company,Handles,CPU,VM | Export-Excel -Path .\test.xlsx -AutoSize -WorksheetName 'sheet2' $excel = Export-Excel -Path .\test.xlsx -PivotTableDefinition $pt -Show This is a re-work of one of the examples in Export-Excel - instead of writing out the pivot definition hash table it is built by calling New-PivotTableDefinition. #> param( [Parameter(Mandatory)] [Alias("PivtoTableName")]#Previous typo - use alias to avoid breaking scripts $PivotTableName, #Worksheet where the data is found $SourceWorkSheet, #Address range in the worksheet e.g "A10:F20" - the first row must be column names: if not specified the whole sheet will be used/ $SourceRange, #Fields to set as rows in the Pivot table $PivotRows, #A hash table in form "FieldName"="Function", where function is one of #Average, Count, CountNums, Max, Min, Product, None, StdDev, StdDevP, Sum, Var, VarP [hashtable]$PivotData, #Fields to set as columns in the Pivot table $PivotColumns, #Fields to use to filter in the Pivot table $PivotFilter, [Switch]$PivotDataToColumn, #By default Pivot tables have Totals for each Row (on the right) and for each column at the bottom. This allows just one or neither to be selected. [ValidateSet("Both","Columns","Rows","None")] [String]$PivotTotals = "Both", #Included for compatibility - equivalent to -PivotTotals "None" [Switch]$NoTotalsInPivot, #If specified a chart Will be included. [Switch]$IncludePivotChart, #Optional title for the pivot chart, by default the title omitted. [String]$ChartTitle, #Height of the chart in Pixels (400 by default) [int]$ChartHeight = 400 , #Width of the chart in Pixels (600 by default) [int]$ChartWidth = 600, #Cell position of the top left corner of the chart, there will be this number of rows above the top edge of the chart (default is 0, chart starts at top edge of row 1). [Int]$ChartRow = 0 , #Cell position of the top left corner of the chart, there will be this number of cells to the left of the chart (default is 4, chart starts at left edge of column E) [Int]$ChartColumn = 4, #Vertical offset of the chart from the cell corner. [Int]$ChartRowOffSetPixels = 0 , #Horizontal offset of the chart from the cell corner. [Int]$ChartColumnOffSetPixels = 0, #Type of chart [OfficeOpenXml.Drawing.Chart.eChartType]$ChartType = 'Pie', #If specified hides the chart legend [Switch]$NoLegend, #if specified attaches the category to slices in a pie chart : not supported on all chart types, this may give errors if applied to an unsupported type. [Switch]$ShowCategory, #If specified attaches percentages to slices in a pie chart. [Switch]$ShowPercent, #If there is already content in the workbook the sheet with the Pivot table will not be active UNLESS Activate is specified [switch]$Activate ) $validDataFuntions = [system.enum]::GetNames([OfficeOpenXml.Table.PivotTable.DataFieldFunctions]) if ($PivotData.values.Where({$_ -notin $validDataFuntions}) ) { Write-Warning -Message ("Pivot data functions might not be valid, they should be one of " + ($validDataFuntions -join ", ") + ".") } $parameters = @{} + $PSBoundParameters if ($NoTotalsInPivot) { $parameters.Remove('NoTotalsInPivot') $parameters["PivotTotals"] = "None" } $parameters.Remove('PivotTableName') @{$PivotTableName = $parameters} } function Add-WorkSheet { <# .Synopsis Adds a workshet to an existing workbook. .Description If the named worksheet already exists, the -clearsheet parameter decides whether it should be deleted and a new one returned, or if not specified the existing sheet will be returned. #> [cmdletBinding()] [OutputType([OfficeOpenXml.ExcelWorksheet])] param( #An object representing an Excel Package. [Parameter(Mandatory = $true, ValueFromPipeline = $true, ParameterSetName = "Package", Position = 0)] [OfficeOpenXml.ExcelPackage]$ExcelPackage, #An Excel workbook to which the Worksheet will be added - a package contains one workbook so you can use whichever fits at the time. [Parameter(Mandatory = $true, ParameterSetName = "WorkBook")] [OfficeOpenXml.ExcelWorkbook]$ExcelWorkbook, #The name of the worksheet 'Sheet1' by default. [string]$WorksheetName , #If the worksheet already exists, by default it will returned, unless -ClearSheet is specified in which case it will be deleted and re-created. [switch]$ClearSheet, #If specified, the worksheet will be moved to the start of the workbook. #MoveToStart takes precedence over MoveToEnd, Movebefore and MoveAfter if more than one is specified. [Switch]$MoveToStart, #If specified, the worksheet will be moved to the end of the workbook. #(This is the default position for newly created sheets, but this can be used to move existing sheets.) [Switch]$MoveToEnd, #If specified, the worksheet will be moved before the nominated one (which can be a postion starting from 1, or a name). #MoveBefore takes precedence over MoveAfter if both are specified. $MoveBefore , # If specified, the worksheet will be moved after the nominated one (which can be a postion starting from 1, or a name or *). # If * is used, the worksheet names will be examined starting with the first one, and the sheet placed after the last sheet which comes before it alphabetically. $MoveAfter , #If there is already content in the workbook the new sheet will not be active UNLESS Activate is specified [switch]$Activate, #If worksheet is provided as a copy source the new worksheet will be a copy of it. The source can be in the same workbook, or in a different file. [OfficeOpenXml.ExcelWorksheet]$CopySource, #Ignored but retained for backwards compatibility. [Switch] $NoClobber ) #if we were given a workbook use it, if we were given a package, use its workbook if ($ExcelPackage -and -not $ExcelWorkbook) {$ExcelWorkbook = $ExcelPackage.Workbook} # If WorksheetName was given, try to use that worksheet. If it wasn't, and we are copying an existing sheet, try to use the sheet name # if we are not copying a sheet or the name is in use, use the name "SheetX" where X is the number of the new sheet if (-not $WorksheetName -and $CopySource -and -not $ExcelWorkbook[$CopySource.Name]) {$WorksheetName = $CopySource.Name} elseif (-not $WorksheetName) {$WorksheetName = "Sheet" + (1 + $ExcelWorkbook.Worksheets.Count)} else {$ws = $ExcelWorkbook.Worksheets[$WorksheetName]} #If -clearsheet was specified and the named sheet exists, delete it if ($ws -and $ClearSheet) { $ExcelWorkbook.Worksheets.Delete($WorksheetName) ; $ws = $null } #copy or create new sheet as needed if (-not $ws -and $CopySource) { Write-Verbose -Message "Copying into worksheet '$WorksheetName'." $ws = $ExcelWorkbook.Worksheets.Add($WorksheetName, $CopySource) } elseif (-not $ws) { $ws = $ExcelWorkbook.Worksheets.Add($WorksheetName) Write-Verbose -Message "Adding worksheet '$WorksheetName'." } else {Write-Verbose -Message "Worksheet '$WorksheetName' already existed."} #region Move sheet if needed if ($MoveToStart) {$ExcelWorkbook.Worksheets.MoveToStart($WorksheetName) } elseif ($MoveToEnd ) {$ExcelWorkbook.Worksheets.MoveToEnd($WorksheetName) } elseif ($MoveBefore ) { if ($ExcelWorkbook.Worksheets[$MoveBefore]) { if ($MoveBefore -is [int]) { $ExcelWorkbook.Worksheets.MoveBefore($ws.Index, $MoveBefore) } else {$ExcelWorkbook.Worksheets.MoveBefore($WorksheetName, $MoveBefore)} } else {Write-Warning "Can't find worksheet '$MoveBefore'; worsheet '$WorksheetName' will not be moved."} } elseif ($MoveAfter ) { if ($MoveAfter -eq "*") { if ($WorksheetName -lt $ExcelWorkbook.Worksheets[1].Name) {$ExcelWorkbook.Worksheets.MoveToStart($WorksheetName)} else { $i = 1 While ($i -lt $ExcelWorkbook.Worksheets.Count -and ($ExcelWorkbook.Worksheets[$i + 1].Name -le $WorksheetName) ) { $i++} $ExcelWorkbook.Worksheets.MoveAfter($ws.Index, $i) } } elseif ($ExcelWorkbook.Worksheets[$MoveAfter]) { if ($MoveAfter -is [int]) { $ExcelWorkbook.Worksheets.MoveAfter($ws.Index, $MoveAfter) } else { $ExcelWorkbook.Worksheets.MoveAfter($WorksheetName, $MoveAfter) } } else {Write-Warning "Can't find worksheet '$MoveAfter'; worsheet '$WorksheetName' will not be moved."} } #endregion if ($Activate) {Select-Worksheet -ExcelWorkbook $ExcelWorkbook -WorksheetName $ws.Name } return $ws } function Add-PivotTable { <# .Synopsis Adds a Pivot table (and optional pivot chart) to a workbook .Description If the pivot table already exists, the source data will be updated. #> param ( #Name for the new Pivot table - this will be the name of a sheet in the workbook [Parameter(Mandatory = $true)] $PivotTableName, #An excel package object for the workbook. $ExcelPackage, #Worksheet where the data is found $SourceWorkSheet, #Address range in the worksheet e.g "A10:F20" - the first row must be column names: if not specified the whole sheet will be used. $SourceRange, #Fields to set as rows in the Pivot table $PivotRows, #A hash table in form "FieldName"="Function", where function is one of #Average, Count, CountNums, Max, Min, Product, None, StdDev, StdDevP, Sum, Var, VarP $PivotData, #Fields to set as columns in the Pivot table $PivotColumns, #Fields to use to filter in the Pivot table $PivotFilter, [Switch]$PivotDataToColumn, #By default Pivot tables have Totals for each Row (on the right) and for each column at the bottom. This allows just one or neither to be selected. [ValidateSet("Both","Columns","Rows","None")] [String]$PivotTotals = "Both", #Included for compatibility - equivalent to -PivotTotals "None" [Switch]$NoTotalsInPivot, #If specified a chart Will be included. [Switch]$IncludePivotChart, #Optional title for the pivot chart, by default the title omitted. [String]$ChartTitle, #Height of the chart in Pixels (400 by default) [int]$ChartHeight = 400 , #Width of the chart in Pixels (600 by default) [int]$ChartWidth = 600, #Cell position of the top left corner of the chart, there will be this number of rows above the top edge of the chart (default is 0, chart starts at top edge of row 1). [Int]$ChartRow = 0 , #Cell position of the top left corner of the chart, there will be this number of cells to the left of the chart (default is 4, chart starts at left edge of column E) [Int]$ChartColumn = 4, #Vertical offset of the chart from the cell corner. [Int]$ChartRowOffSetPixels = 0 , #Horizontal offset of the chart from the cell corner. [Int]$ChartColumnOffSetPixels = 0, #Type of chart [OfficeOpenXml.Drawing.Chart.eChartType]$ChartType = 'Pie', #If specified hides the chart legend [Switch]$NoLegend, #if specified attaches the category to slices in a pie chart : not supported on all chart types, this may give errors if applied to an unsupported type. [Switch]$ShowCategory, #If specified attaches percentages to slices in a pie chart. [Switch]$ShowPercent, #If there is already content in the workbook the sheet with the Pivot table will not be active UNLESS Activate is specified [switch]$Activate ) $pivotTableDataName = $pivotTableName + 'PivotTableData' [OfficeOpenXml.ExcelWorksheet]$wsPivot = Add-WorkSheet -ExcelPackage $ExcelPackage -WorksheetName $pivotTableName -Activate:$Activate #if the pivot doesn't exist, create it. if (-not $wsPivot.PivotTables[$pivotTableDataName] ) { try { #Accept a string or a worksheet object as $Source Worksheet. if ($SourceWorkSheet -is [string]) { $SourceWorkSheet = $ExcelPackage.Workbook.Worksheets.where( {$_.name -Like $SourceWorkSheet})[0] } elseif ($SourceWorkSheet -is [int]) { $SourceWorkSheet = $ExcelPackage.Workbook.Worksheets[$SourceWorkSheet] } if ($SourceWorkSheet -isnot [OfficeOpenXml.ExcelWorksheet]) {Write-Warning -Message "Could not find source Worksheet for pivot-table '$pivotTableName'." ; return } else { if ($PivotFilter) {$PivotTableStartCell = "A3"} else { $PivotTableStartCell = "A1"} if (-not $SourceRange) { $SourceRange = $SourceWorkSheet.Dimension.Address} $pivotTable = $wsPivot.PivotTables.Add($wsPivot.Cells[$PivotTableStartCell], $SourceWorkSheet.Cells[ $SourceRange], $pivotTableDataName) } foreach ($Row in $PivotRows) { try {$null = $pivotTable.RowFields.Add($pivotTable.Fields[$Row]) } catch {Write-Warning -message "Could not add '$row' to Rows in PivotTable $pivotTableName." } } foreach ($Column in $PivotColumns) { try {$null = $pivotTable.ColumnFields.Add($pivotTable.Fields[$Column])} catch {Write-Warning -message "Could not add '$Column' to Columns in PivotTable $pivotTableName." } } if ($PivotData -is [HashTable] -or $PivotData -is [System.Collections.Specialized.OrderedDictionary]) { $PivotData.Keys | ForEach-Object { try { $df = $pivotTable.DataFields.Add($pivotTable.Fields[$_]) $df.Function = $PivotData.$_ } catch {Write-Warning -message "Problem adding data fields to PivotTable $pivotTableName." } } } else { foreach ($field in $PivotData) { try { $df = $pivotTable.DataFields.Add($pivotTable.Fields[$field]) $df.Function = 'Count' } catch {Write-Warning -message "Problem adding data field '$field' to PivotTable $pivotTableName." } } } foreach ( $pFilter in $PivotFilter) { try { $null = $pivotTable.PageFields.Add($pivotTable.Fields[$pFilter])} catch {Write-Warning -message "Could not add '$pFilter' to Filter/Page fields in PivotTable $pivotTableName." } } if ($NoTotalsInPivot) {$PivotTotals = "None" } if ($PivotTotals -eq "None" -or $PivotTotals -eq "Columns") { $pivotTable.RowGrandTotals = $false } elseif ($PivotTotals -eq "Both" -or $PivotTotals -eq "Rows") { $pivotTable.RowGrandTotals = $true } if ($PivotTotals -eq "None" -or $PivotTotals -eq "Rows") { $pivotTable.ColumGrandTotals = $false } # Epplus spelling mistake, not mine! elseif ($PivotTotals -eq "Both" -or $PivotTotals -eq "Columns") { $pivotTable.ColumGrandTotals = $true } if ($PivotDataToColumn ) { $pivotTable.DataOnRows = $false } } catch {Write-Warning -Message "Failed adding PivotTable '$pivotTableName': $_"} } else { Write-Warning -Message "Pivot table defined in $($pivotTableName) already exists, only the data range will be changed." $pivotTable = $wsPivot.PivotTables[$pivotTableDataName] $pivotTable.CacheDefinition.CacheDefinitionXml.pivotCacheDefinition.cacheSource.worksheetSource.ref = $SourceRange } #Create the chart if it doesn't exist, leave alone if it does. if ($IncludePivotChart -and -not $wsPivot.Drawings['PivotChart'] ) { try { [OfficeOpenXml.Drawing.Chart.ExcelChart] $chart = $wsPivot.Drawings.AddChart('PivotChart', $ChartType, $pivotTable) $chart.SetPosition($ChartRow , $ChartRowOffSetPixels , $ChartColumn, $ChartColumnOffSetPixels) $chart.SetSize( $ChartWidth, $ChartHeight) if ($chart.DataLabel) { $chart.DataLabel.ShowCategory = [boolean]$ShowCategory $chart.DataLabel.ShowPercent = [boolean]$ShowPercent } if ($NoLegend) { $chart.Legend.Remove()} if ($ChartTitle) {$chart.Title.Text = $ChartTitle} } catch { catch {Write-Warning -Message "Failed adding chart for pivotable '$pivotTableName': $_"} } } } function Add-ExcelChart { <# .Synopsis Creates a chart in an Existing excel worksheet #> [cmdletbinding()] param( #An object representing the worksheet where the chart should be added. [OfficeOpenXml.ExcelWorksheet]$Worksheet, [String]$Title = "Chart Title", #$Header, Not used but referenced previously #The Type of chart (Area, Line, Pie etc) [OfficeOpenXml.Drawing.Chart.eChartType]$ChartType = "ColumnStacked", $XRange, $YRange, [int]$Width = 500, [int]$Height = 350, [int]$Row = 0, [int]$RowOffSetPixels = 10, [int]$Column = 6, [int]$ColumnOffSetPixels = 5, [OfficeOpenXml.Drawing.Chart.eLegendPosition]$LegendPostion, $LegendSize, [Switch]$legendBold, [Switch]$NoLegend, [Switch]$ShowCategory, [Switch]$ShowPercent, $SeriesHeader, [Switch]$TitleBold, [Int]$TitleSize , [String]$XAxisTitleText, [Switch]$XAxisTitleBold, $XAxisTitleSize , [string]$XAxisNumberformat, $XMajorUnit, $XMinorUnit, $XMaxValue, $XMinValue, [OfficeOpenXml.Drawing.Chart.eAxisPosition]$XAxisPosition , [String]$YAxisTitleText, [Switch]$YAxisTitleBold, $YAxisTitleSize, [string]$YAxisNumberformat, $YMajorUnit, $YMinorUnit, $YMaxValue, $YMinValue, [OfficeOpenXml.Drawing.Chart.eAxisPosition]$YAxisPosition ) try { $ChartName = 'Chart' + (Split-Path -Leaf ([System.IO.path]::GetTempFileName())) -replace 'tmp|\.', '' $chart = $Worksheet.Drawings.AddChart($ChartName, $ChartType) if ($Title) { $chart.Title.Text = $Title if ($TitleBold) {$chart.Title.Font.Bold = $true} if ($TitleSize) {$chart.Title.Font.Size = $TitleSize} } if ($NoLegend) { $chart.Legend.Remove() } else { if ($LegendPostion) {$Chart.Legend.Position = $LegendPostion} if ($LegendSize) {$chart.Legend.Font.Size = $LegendSize} if ($legendBold) {$chart.Legend.Font.Bold = $true} } if ($XAxisTitleText) { $chart.XAxis.Title.Text = $XAxisTitleText if ($XAxisTitleBold) {$chart.XAxis.Title.Font.Bold = $true} if ($XAxisTitleSize) {$chart.XAxis.Title.Font.Size = $XAxisTitleSize} } if ($XAxisPosition) {Write-Warning "X Axis position is not being set propertly at the moment, parameter ignored" } #$chart.ChartXml.chartSpace.chart.plotArea.catAx.axPos.val = $XAxisPosition.ToString().substring(0,1)} if ($XMajorUnit) {$chart.XAxis.MajorUnit = $XMajorUnit} if ($XMinorUnit) {$chart.XAxis.MinorUnit = $XMinorUnit} if ($null -ne $XMinValue) {$chart.XAxis.MinValue = $XMinValue} if ($null -ne $XMaxValue) {$chart.XAxis.MaxValue = $XMaxValue} if ($XAxisNumberformat) {$chart.XAxis.Format = (Expand-NumberFormat $XAxisNumberformat)} if ($YAxisTitleText) { $chart.YAxis.Title.Text = $YAxisTitleText if ($YAxisTitleBold) {$chart.YAxis.Title.Font.Bold = $true} if ($YAxisTitleSize) {$chart.YAxis.Title.Font.Size = $YAxisTitleSize} } if ($YAxisPosition) {Write-Warning "Y Axis position is not being set propertly at the moment, parameter ignored" } #$chart.ChartXml.chartSpace.chart.plotArea.valAx.axPos.val= $YAxisPosition.ToString().substring(0,1)} if ($YMajorUnit) {$chart.YAxis.MajorUnit = $YMajorUnit} if ($YMinorUnit) {$chart.YAxis.MinorUnit = $YMinorUnit} if ($null -ne $YMinValue){$chart.YAxis.MinValue = $YMinValue} if ($null -ne $YMaxValue){$chart.YAxis.MaxValue = $YMaxValue} if ($YAxisNumberformat) {$chart.YAxis.Format = (Expand-NumberFormat $YAxisNumberformat)} if ($null -ne $chart.Datalabel) { $chart.Datalabel.ShowCategory = [boolean]$ShowCategory $chart.Datalabel.ShowPercent = [boolean]$ShowPercent } $chart.SetPosition($Row, $RowOffsetPixels, $Column, $ColumnOffsetPixels) $chart.SetSize($Width, $Height) $chartDefCount = @($YRange).Count if ($chartDefCount -eq 1) { $Series = $chart.Series.Add($YRange, $XRange) if ($SeriesHeader) { $Series.Header = $SeriesHeader} else { $Series.Header = 'Series 1'} } else { for ($idx = 0; $idx -lt $chartDefCount; $idx += 1) { $Series = $chart.Series.Add($YRange[$idx], $XRange) if ($SeriesHeader.Count -gt 0) { $Series.Header = $SeriesHeader[$idx] } else { $Series.Header = "Series $($idx)"} } } } catch {Write-Warning -Message "Failed adding Chart to worksheet '$($WorkSheet).name': $_"} } function Select-Worksheet { param ( #An object representing an Excel Package. [Parameter(Mandatory = $true, ValueFromPipeline = $true, ParameterSetName = "Package", Position = 0)] [OfficeOpenXml.ExcelPackage]$ExcelPackage, #An Excel workbook to which the Worksheet will be added - a package contains one workbook so you can use whichever fits at the time. [Parameter(Mandatory = $true, ParameterSetName = "WorkBook")] [OfficeOpenXml.ExcelWorkbook]$ExcelWorkbook, #The name of the worksheet 'Sheet1' by default. [string]$WorksheetName ) #if we were given a workbook use it, if we were given a package, use its workbook if ($ExcelPackage -and -not $ExcelWorkbook) {$ExcelWorkbook = $ExcelPackage.Workbook} if (-not $ExcelWorkbook.Worksheets.Where({$_.name -eq $WorksheetName})) { Write-Warning -Message "Workbook does not contain a worksheet named '$WorksheetName'" ; return } else { foreach ($w in $ExcelWorkbook.Worksheets) {$w.View.TabSelected = $false} $ExcelWorkbook.Worksheets[$WorksheetName].View.TabSelected = $true } } |