exports/ProxyCmdletDefinitions.ps1


# ----------------------------------------------------------------------------------
# Code generated by Microsoft (R) AutoRest Code Generator (autorest: 3.6.6, generator: @autorest/powershell@3.0.463)
# Changes may cause incorrect behavior and will be lost if the code is regenerated.
# ----------------------------------------------------------------------------------

<#
.Synopsis
This endpoint allows you to run the erase command on the specified device.
If a device is offline, the command will be run when the device becomes available.

#### Sample Request
```
curl -X POST \\
  https://console.jumpcloud.com/api/systems/{system_id}/command/builtin/erase \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d {}
```
.Description
This endpoint allows you to run the erase command on the specified device.
If a device is offline, the command will be run when the device becomes available.

#### Sample Request
```
curl -X POST \\
  https://console.jumpcloud.com/api/systems/{system_id}/command/builtin/erase \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d {}
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Clear-JcSdkSystem.md
#>

function Clear-JcSdkSystem {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Clear', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Clear', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${SystemId},

    [Parameter(ParameterSetName='ClearViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Clear = 'JumpCloud.SDK.V1.custom\Clear-JcSdkSystem';
            ClearViaIdentity = 'JumpCloud.SDK.V1.custom\Clear-JcSdkSystem';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
The endpoint retrieves an SSO / SAML Application.
.Description
The endpoint retrieves an SSO / SAML Application.
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.IApplication
.Outputs
JumpCloud.SDK.V1.Models.IApplicationslist
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Get-JcSdkApplication.md
#>

function Get-JcSdkApplication {
[OutputType([JumpCloud.SDK.V1.Models.IApplication], [JumpCloud.SDK.V1.Models.IApplicationslist])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(ParameterSetName='List')]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # The space separated fields included in the returned records.
    # If omitted the default list of fields will be returned.
    ${Fields},

    [Parameter(ParameterSetName='List')]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String[]]
    # A filter to apply to the query.
    # See the supported operators below.
    # For more complex searches,
    # see the related `/search/<domain>` endpoints,
    # e.g.
    # `/search/systems`.
    #
    # **Filter structure**: `<field>:<operator>:<value>`.
    #
    # **field** = Populate with a valid field from an endpoint response.
    #
    # **operator** = Supported operators are:
    # - `$eq` (equals)
    # - `$ne` (does not equal)
    # - `$gt` (is greater than)
    # - `$gte` (is greater than or equal to)
    # - `$lt` (is less than)
    # - `$lte` (is less than or equal to)
    #
    # _Note: v1 operators differ from v2 operators._
    #
    # _Note: For v1 operators, excluding the `$` will result in undefined behavior._
    #
    # **value** = Populate with the value you want to search for.
    # Is case sensitive.
    #
    # **Examples**
    # - `GET /users?filter=username:$eq:testuser`
    # - `GET /systemusers?filter=password_expiration_date:$lte:2021-10-24`
    # - `GET /systemusers?filter=department:$ne:Accounting`
    # - `GET /systems?filter[0]=firstname:$eq:foo&filter[1]=lastname:$eq:bar` - this will
    # AND the filters together.
    # - `GET /systems?filter[or][0]=lastname:$eq:foo&filter[or][1]=lastname:$eq:bar` - this will
    # OR the filters together.
    ${Filter},

    [Parameter(ParameterSetName='List')]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # The space separated fields used to sort the collection.
    # Default sort is ascending, prefix with - to sort descending.
    ${Sort},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Boolean]
    # Set to $true to return all results.
    # This will overwrite any skip and limit parameter.
    ${Paginate},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            List = 'JumpCloud.SDK.V1.custom\Get-JcSdkApplication';
            Get = 'JumpCloud.SDK.V1.custom\Get-JcSdkApplication';
            GetViaIdentity = 'JumpCloud.SDK.V1.custom\Get-JcSdkApplication';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
The endpoint returns a specific SSO / SAML Application Template.

#### Sample Request
```
curl -X GET https://console.jumpcloud.com/api/application-templates/{id} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'

```
.Description
The endpoint returns a specific SSO / SAML Application Template.

#### Sample Request
```
curl -X GET https://console.jumpcloud.com/api/application-templates/{id} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'

```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.IApplicationtemplate
.Outputs
JumpCloud.SDK.V1.Models.IApplicationtemplateslist
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Get-JcSdkApplicationTemplate.md
#>

function Get-JcSdkApplicationTemplate {
[OutputType([JumpCloud.SDK.V1.Models.IApplicationtemplate], [JumpCloud.SDK.V1.Models.IApplicationtemplateslist])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # The space separated fields included in the returned records.
    # If omitted the default list of fields will be returned.
    ${Fields},

    [Parameter()]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String[]]
    # A filter to apply to the query.
    # See the supported operators below.
    # For more complex searches,
    # see the related `/search/<domain>` endpoints,
    # e.g.
    # `/search/systems`.
    #
    # **Filter structure**: `<field>:<operator>:<value>`.
    #
    # **field** = Populate with a valid field from an endpoint response.
    #
    # **operator** = Supported operators are:
    # - `$eq` (equals)
    # - `$ne` (does not equal)
    # - `$gt` (is greater than)
    # - `$gte` (is greater than or equal to)
    # - `$lt` (is less than)
    # - `$lte` (is less than or equal to)
    #
    # _Note: v1 operators differ from v2 operators._
    #
    # _Note: For v1 operators, excluding the `$` will result in undefined behavior._
    #
    # **value** = Populate with the value you want to search for.
    # Is case sensitive.
    #
    # **Examples**
    # - `GET /users?filter=username:$eq:testuser`
    # - `GET /systemusers?filter=password_expiration_date:$lte:2021-10-24`
    # - `GET /systemusers?filter=department:$ne:Accounting`
    # - `GET /systems?filter[0]=firstname:$eq:foo&filter[1]=lastname:$eq:bar` - this will
    # AND the filters together.
    # - `GET /systems?filter[or][0]=lastname:$eq:foo&filter[or][1]=lastname:$eq:bar` - this will
    # OR the filters together.
    ${Filter},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # The space separated fields used to sort the collection.
    # Default sort is ascending, prefix with - to sort descending.
    ${Sort},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Boolean]
    # Set to $true to return all results.
    # This will overwrite any skip and limit parameter.
    ${Paginate},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            List = 'JumpCloud.SDK.V1.custom\Get-JcSdkApplicationTemplate';
            Get = 'JumpCloud.SDK.V1.custom\Get-JcSdkApplicationTemplate';
            GetViaIdentity = 'JumpCloud.SDK.V1.custom\Get-JcSdkApplicationTemplate';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint returns a specific command based on the command ID.

#### Sample Request
```
curl -X GET https://console.jumpcloud.com/api/commands/{CommandID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
```
.Description
This endpoint returns a specific command based on the command ID.

#### Sample Request
```
curl -X GET https://console.jumpcloud.com/api/commands/{CommandID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.ICommand
.Outputs
JumpCloud.SDK.V1.Models.ICommandslist
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Get-JcSdkCommand.md
#>

function Get-JcSdkCommand {
[OutputType([JumpCloud.SDK.V1.Models.ICommand], [JumpCloud.SDK.V1.Models.ICommandslist])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # Use a space seperated string of field parameters to include the data in the response.
    # If omitted, the default list of fields will be returned.
    ${Fields},

    [Parameter(ParameterSetName='List')]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String[]]
    # A filter to apply to the query.
    # See the supported operators below.
    # For more complex searches,
    # see the related `/search/<domain>` endpoints,
    # e.g.
    # `/search/systems`.
    #
    # **Filter structure**: `<field>:<operator>:<value>`.
    #
    # **field** = Populate with a valid field from an endpoint response.
    #
    # **operator** = Supported operators are:
    # - `$eq` (equals)
    # - `$ne` (does not equal)
    # - `$gt` (is greater than)
    # - `$gte` (is greater than or equal to)
    # - `$lt` (is less than)
    # - `$lte` (is less than or equal to)
    #
    # _Note: v1 operators differ from v2 operators._
    #
    # _Note: For v1 operators, excluding the `$` will result in undefined behavior._
    #
    # **value** = Populate with the value you want to search for.
    # Is case sensitive.
    #
    # **Examples**
    # - `GET /users?filter=username:$eq:testuser`
    # - `GET /systemusers?filter=password_expiration_date:$lte:2021-10-24`
    # - `GET /systemusers?filter=department:$ne:Accounting`
    # - `GET /systems?filter[0]=firstname:$eq:foo&filter[1]=lastname:$eq:bar` - this will
    # AND the filters together.
    # - `GET /systems?filter[or][0]=lastname:$eq:foo&filter[or][1]=lastname:$eq:bar` - this will
    # OR the filters together.
    ${Filter},

    [Parameter(ParameterSetName='List')]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # Use space separated sort parameters to sort the collection.
    # Default sort is ascending.
    # Prefix with `-` to sort descending.
    ${Sort},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Boolean]
    # Set to $true to return all results.
    # This will overwrite any skip and limit parameter.
    ${Paginate},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            List = 'JumpCloud.SDK.V1.custom\Get-JcSdkCommand';
            Get = 'JumpCloud.SDK.V1.custom\Get-JcSdkCommand';
            GetViaIdentity = 'JumpCloud.SDK.V1.custom\Get-JcSdkCommand';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint returns the uploaded file(s) associated with a specific command.

#### Sample Request

```
curl -X GET https://console.jumpcloud.com/api/files/command/{commandID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
  ```
.Description
This endpoint returns the uploaded file(s) associated with a specific command.

#### Sample Request

```
curl -X GET https://console.jumpcloud.com/api/files/command/{commandID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
  ```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.ICommandfilereturn
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Get-JcSdkCommandFile.md
#>

function Get-JcSdkCommandFile {
[OutputType([JumpCloud.SDK.V1.Models.ICommandfilereturn])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # Use a space seperated string of field parameters to include the data in the response.
    # If omitted, the default list of fields will be returned.
    ${Fields},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Boolean]
    # Set to $true to return all results.
    # This will overwrite any skip and limit parameter.
    ${Paginate},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'JumpCloud.SDK.V1.custom\Get-JcSdkCommandFile';
            GetViaIdentity = 'JumpCloud.SDK.V1.custom\Get-JcSdkCommandFile';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint returns a specific command result.

#### Sample Request
```
curl -X GET https://console.jumpcloud.com/api/commandresults/{CommandResultID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
  ```
.Description
This endpoint returns a specific command result.

#### Sample Request
```
curl -X GET https://console.jumpcloud.com/api/commandresults/{CommandResultID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
  ```
.Example
Get-JcSdkCommandResult
.Example
Get-JcSdkCommandResult -Id 640659f4b7ac4d5f061f8ac9

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.ICommandresult
.Outputs
JumpCloud.SDK.V1.Models.ICommandresultslist
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Get-JcSdkCommandResult.md
#>

function Get-JcSdkCommandResult {
[OutputType([JumpCloud.SDK.V1.Models.ICommandresult], [JumpCloud.SDK.V1.Models.ICommandresultslist])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # Use a space seperated string of field parameters to include the data in the response.
    # If omitted, the default list of fields will be returned.
    ${Fields},

    [Parameter()]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String[]]
    # A filter to apply to the query.
    # See the supported operators below.
    # For more complex searches,
    # see the related `/search/<domain>` endpoints,
    # e.g.
    # `/search/systems`.
    #
    # **Filter structure**: `<field>:<operator>:<value>`.
    #
    # **field** = Populate with a valid field from an endpoint response.
    #
    # **operator** = Supported operators are:
    # - `$eq` (equals)
    # - `$ne` (does not equal)
    # - `$gt` (is greater than)
    # - `$gte` (is greater than or equal to)
    # - `$lt` (is less than)
    # - `$lte` (is less than or equal to)
    #
    # _Note: v1 operators differ from v2 operators._
    #
    # _Note: For v1 operators, excluding the `$` will result in undefined behavior._
    #
    # **value** = Populate with the value you want to search for.
    # Is case sensitive.
    #
    # **Examples**
    # - `GET /users?filter=username:$eq:testuser`
    # - `GET /systemusers?filter=password_expiration_date:$lte:2021-10-24`
    # - `GET /systemusers?filter=department:$ne:Accounting`
    # - `GET /systems?filter[0]=firstname:$eq:foo&filter[1]=lastname:$eq:bar` - this will
    # AND the filters together.
    # - `GET /systems?filter[or][0]=lastname:$eq:foo&filter[or][1]=lastname:$eq:bar` - this will
    # OR the filters together.
    ${Filter},

    [Parameter(ParameterSetName='List')]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # Use space separated sort parameters to sort the collection.
    # Default sort is ascending.
    # Prefix with `-` to sort descending.
    ${Sort},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Boolean]
    # Set to $true to return all results.
    # This will overwrite any skip and limit parameter.
    ${Paginate},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            List = 'JumpCloud.SDK.V1.custom\Get-JcSdkCommandResult';
            Get = 'JumpCloud.SDK.V1.custom\Get-JcSdkCommandResult';
            GetViaIdentity = 'JumpCloud.SDK.V1.custom\Get-JcSdkCommandResult';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint returns results for a specific command.

#### Sample Request
```
curl -X GET https://console.jumpcloud.com/api/commands/{id}/results \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
  ````
.Description
This endpoint returns results for a specific command.

#### Sample Request
```
curl -X GET https://console.jumpcloud.com/api/commands/{id}/results \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
  ````
.Example
get-JcSdkCommandResultByCommandId -Id 6406532738e1a32cafa24260

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.ICommandresultbycommandid
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Get-JcSdkCommandResultByCommandId.md
#>

function Get-JcSdkCommandResultByCommandId {
[OutputType([JumpCloud.SDK.V1.Models.ICommandresultbycommandid])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Boolean]
    # Set to $true to return all results.
    # This will overwrite any skip and limit parameter.
    ${Paginate},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'JumpCloud.SDK.V1.custom\Get-JcSdkCommandResultByCommandId';
            GetViaIdentity = 'JumpCloud.SDK.V1.custom\Get-JcSdkCommandResultByCommandId';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint returns a particular Organization.

#### Sample Request

```
curl -X GET https://console.jumpcloud.com/api/organizations/{OrganizationID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
```
.Description
This endpoint returns a particular Organization.

#### Sample Request

```
curl -X GET https://console.jumpcloud.com/api/organizations/{OrganizationID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.IOrganization
.Outputs
JumpCloud.SDK.V1.Models.IOrganizationslist
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Get-JcSdkOrganization.md
#>

function Get-JcSdkOrganization {
[OutputType([JumpCloud.SDK.V1.Models.IOrganization], [JumpCloud.SDK.V1.Models.IOrganizationslist])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # Use a space seperated string of field parameters to include the data in the response.
    # If omitted, the default list of fields will be returned.
    ${Fields},

    [Parameter()]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String[]]
    # A filter to apply to the query.
    # See the supported operators below.
    # For more complex searches,
    # see the related `/search/<domain>` endpoints,
    # e.g.
    # `/search/systems`.
    #
    # **Filter structure**: `<field>:<operator>:<value>`.
    #
    # **field** = Populate with a valid field from an endpoint response.
    #
    # **operator** = Supported operators are:
    # - `$eq` (equals)
    # - `$ne` (does not equal)
    # - `$gt` (is greater than)
    # - `$gte` (is greater than or equal to)
    # - `$lt` (is less than)
    # - `$lte` (is less than or equal to)
    #
    # _Note: v1 operators differ from v2 operators._
    #
    # _Note: For v1 operators, excluding the `$` will result in undefined behavior._
    #
    # **value** = Populate with the value you want to search for.
    # Is case sensitive.
    #
    # **Examples**
    # - `GET /users?filter=username:$eq:testuser`
    # - `GET /systemusers?filter=password_expiration_date:$lte:2021-10-24`
    # - `GET /systemusers?filter=department:$ne:Accounting`
    # - `GET /systems?filter[0]=firstname:$eq:foo&filter[1]=lastname:$eq:bar` - this will
    # AND the filters together.
    # - `GET /systems?filter[or][0]=lastname:$eq:foo&filter[or][1]=lastname:$eq:bar` - this will
    # OR the filters together.
    ${Filter},

    [Parameter(ParameterSetName='List')]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # A nested object containing a `searchTerm` string or array of strings and a list of `fields` to search on.
    ${Search},

    [Parameter(ParameterSetName='List')]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # Use space separated sort parameters to sort the collection.
    # Default sort is ascending.
    # Prefix with `-` to sort descending.
    ${Sort},

    [Parameter(ParameterSetName='List')]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # Use space separated sort parameters to sort the collection, ignoring case.
    # Default sort is ascending.
    # Prefix with `-` to sort descending.
    ${SortIgnoreCase},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Boolean]
    # Set to $true to return all results.
    # This will overwrite any skip and limit parameter.
    ${Paginate},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            List = 'JumpCloud.SDK.V1.custom\Get-JcSdkOrganization';
            Get = 'JumpCloud.SDK.V1.custom\Get-JcSdkOrganization';
            GetViaIdentity = 'JumpCloud.SDK.V1.custom\Get-JcSdkOrganization';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint allows you to get a RADIUS server in your organization.

####
```
curl -X PUT https://console.jumpcloud.com/api/radiusservers/{ServerID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
```
.Description
This endpoint allows you to get a RADIUS server in your organization.

####
```
curl -X PUT https://console.jumpcloud.com/api/radiusservers/{ServerID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.IRadiusserver
.Outputs
JumpCloud.SDK.V1.Models.IRadiusserverslist
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Get-JcSdkRadiusServer.md
#>

function Get-JcSdkRadiusServer {
[OutputType([JumpCloud.SDK.V1.Models.IRadiusserver], [JumpCloud.SDK.V1.Models.IRadiusserverslist])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(ParameterSetName='List')]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # Use a space seperated string of field parameters to include the data in the response.
    # If omitted, the default list of fields will be returned.
    ${Fields},

    [Parameter(ParameterSetName='List')]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String[]]
    # A filter to apply to the query.
    # See the supported operators below.
    # For more complex searches,
    # see the related `/search/<domain>` endpoints,
    # e.g.
    # `/search/systems`.
    #
    # **Filter structure**: `<field>:<operator>:<value>`.
    #
    # **field** = Populate with a valid field from an endpoint response.
    #
    # **operator** = Supported operators are:
    # - `$eq` (equals)
    # - `$ne` (does not equal)
    # - `$gt` (is greater than)
    # - `$gte` (is greater than or equal to)
    # - `$lt` (is less than)
    # - `$lte` (is less than or equal to)
    #
    # _Note: v1 operators differ from v2 operators._
    #
    # _Note: For v1 operators, excluding the `$` will result in undefined behavior._
    #
    # **value** = Populate with the value you want to search for.
    # Is case sensitive.
    #
    # **Examples**
    # - `GET /users?filter=username:$eq:testuser`
    # - `GET /systemusers?filter=password_expiration_date:$lte:2021-10-24`
    # - `GET /systemusers?filter=department:$ne:Accounting`
    # - `GET /systems?filter[0]=firstname:$eq:foo&filter[1]=lastname:$eq:bar` - this will
    # AND the filters together.
    # - `GET /systems?filter[or][0]=lastname:$eq:foo&filter[or][1]=lastname:$eq:bar` - this will
    # OR the filters together.
    ${Filter},

    [Parameter(ParameterSetName='List')]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # Use space separated sort parameters to sort the collection.
    # Default sort is ascending.
    # Prefix with `-` to sort descending.
    ${Sort},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Boolean]
    # Set to $true to return all results.
    # This will overwrite any skip and limit parameter.
    ${Paginate},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            List = 'JumpCloud.SDK.V1.custom\Get-JcSdkRadiusServer';
            Get = 'JumpCloud.SDK.V1.custom\Get-JcSdkRadiusServer';
            GetViaIdentity = 'JumpCloud.SDK.V1.custom\Get-JcSdkRadiusServer';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint returns an individual system.

#### Sample Request
```
curl -X GET https://console.jumpcloud.com/api/systems/{SystemID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
  ```
.Description
This endpoint returns an individual system.

#### Sample Request
```
curl -X GET https://console.jumpcloud.com/api/systems/{SystemID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
  ```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.IJcSystem
.Outputs
JumpCloud.SDK.V1.Models.ISystemslist
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Get-JcSdkSystem.md
#>

function Get-JcSdkSystem {
[OutputType([JumpCloud.SDK.V1.Models.IJcSystem], [JumpCloud.SDK.V1.Models.ISystemslist])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # Use a space seperated string of field parameters to include the data in the response.
    # If omitted, the default list of fields will be returned.
    ${Fields},

    [Parameter()]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String[]]
    # A filter to apply to the query.
    # See the supported operators below.
    # For more complex searches,
    # see the related `/search/<domain>` endpoints,
    # e.g.
    # `/search/systems`.
    #
    # **Filter structure**: `<field>:<operator>:<value>`.
    #
    # **field** = Populate with a valid field from an endpoint response.
    #
    # **operator** = Supported operators are:
    # - `$eq` (equals)
    # - `$ne` (does not equal)
    # - `$gt` (is greater than)
    # - `$gte` (is greater than or equal to)
    # - `$lt` (is less than)
    # - `$lte` (is less than or equal to)
    #
    # _Note: v1 operators differ from v2 operators._
    #
    # _Note: For v1 operators, excluding the `$` will result in undefined behavior._
    #
    # **value** = Populate with the value you want to search for.
    # Is case sensitive.
    #
    # **Examples**
    # - `GET /users?filter=username:$eq:testuser`
    # - `GET /systemusers?filter=password_expiration_date:$lte:2021-10-24`
    # - `GET /systemusers?filter=department:$ne:Accounting`
    # - `GET /systems?filter[0]=firstname:$eq:foo&filter[1]=lastname:$eq:bar` - this will
    # AND the filters together.
    # - `GET /systems?filter[or][0]=lastname:$eq:foo&filter[or][1]=lastname:$eq:bar` - this will
    # OR the filters together.
    ${Filter},

    [Parameter(ParameterSetName='List')]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # A nested object containing a `searchTerm` string or array of strings and a list of `fields` to search on.
    ${Search},

    [Parameter(ParameterSetName='List')]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # Use space separated sort parameters to sort the collection.
    # Default sort is ascending.
    # Prefix with `-` to sort descending.
    ${Sort},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Boolean]
    # Set to $true to return all results.
    # This will overwrite any skip and limit parameter.
    ${Paginate},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            List = 'JumpCloud.SDK.V1.custom\Get-JcSdkSystem';
            Get = 'JumpCloud.SDK.V1.custom\Get-JcSdkSystem';
            GetViaIdentity = 'JumpCloud.SDK.V1.custom\Get-JcSdkSystem';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint returns a particular System User.

#### Sample Request

```
curl -X GET https://console.jumpcloud.com/api/systemusers/{UserID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
```
.Description
This endpoint returns a particular System User.

#### Sample Request

```
curl -X GET https://console.jumpcloud.com/api/systemusers/{UserID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.ISystemuserreturn
.Outputs
JumpCloud.SDK.V1.Models.ISystemuserslist
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Get-JcSdkUser.md
#>

function Get-JcSdkUser {
[OutputType([JumpCloud.SDK.V1.Models.ISystemuserreturn], [JumpCloud.SDK.V1.Models.ISystemuserslist])]
[CmdletBinding(DefaultParameterSetName='List', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # Use a space seperated string of field parameters to include the data in the response.
    # If omitted, the default list of fields will be returned.
    ${Fields},

    [Parameter()]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String[]]
    # A filter to apply to the query.
    # See the supported operators below.
    # For more complex searches,
    # see the related `/search/<domain>` endpoints,
    # e.g.
    # `/search/systems`.
    #
    # **Filter structure**: `<field>:<operator>:<value>`.
    #
    # **field** = Populate with a valid field from an endpoint response.
    #
    # **operator** = Supported operators are:
    # - `$eq` (equals)
    # - `$ne` (does not equal)
    # - `$gt` (is greater than)
    # - `$gte` (is greater than or equal to)
    # - `$lt` (is less than)
    # - `$lte` (is less than or equal to)
    #
    # _Note: v1 operators differ from v2 operators._
    #
    # _Note: For v1 operators, excluding the `$` will result in undefined behavior._
    #
    # **value** = Populate with the value you want to search for.
    # Is case sensitive.
    #
    # **Examples**
    # - `GET /users?filter=username:$eq:testuser`
    # - `GET /systemusers?filter=password_expiration_date:$lte:2021-10-24`
    # - `GET /systemusers?filter=department:$ne:Accounting`
    # - `GET /systems?filter[0]=firstname:$eq:foo&filter[1]=lastname:$eq:bar` - this will
    # AND the filters together.
    # - `GET /systems?filter[or][0]=lastname:$eq:foo&filter[or][1]=lastname:$eq:bar` - this will
    # OR the filters together.
    ${Filter},

    [Parameter(ParameterSetName='List')]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # A nested object containing a `searchTerm` string or array of strings and a list of `fields` to search on.
    ${Search},

    [Parameter(ParameterSetName='List')]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # The space separated fields used to sort the collection.
    # Default sort is ascending, prefix with `-` to sort descending.
    ${Sort},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Boolean]
    # Set to $true to return all results.
    # This will overwrite any skip and limit parameter.
    ${Paginate},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            List = 'JumpCloud.SDK.V1.custom\Get-JcSdkUser';
            Get = 'JumpCloud.SDK.V1.custom\Get-JcSdkUser';
            GetViaIdentity = 'JumpCloud.SDK.V1.custom\Get-JcSdkUser';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint will return a specific System User's public SSH key.
.Description
This endpoint will return a specific System User's public SSH key.
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.ISshkeylist
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Get-JcSdkUserSshKey.md
#>

function Get-JcSdkUserSshKey {
[OutputType([JumpCloud.SDK.V1.Models.ISshkeylist])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'JumpCloud.SDK.V1.custom\Get-JcSdkUserSshKey';
            GetViaIdentity = 'JumpCloud.SDK.V1.custom\Get-JcSdkUserSshKey';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint changes the state of a STAGED user to ACTIVATED.
#### Email Flag
Use the \"email\" flag to determine whether or not to send a Welcome or
Activation email to the newly activated user.
Sending an empty body
without the `email` flag, will send an email with default behavior
(see the \"Behavior\" section below)
```
{}
```
Sending `email=true` flag will send an email with default behavior (see `Behavior` below)
```
{ \"email\": true }
```
Populated email will override the default behavior and send to the specified email value
```
{ \"email\": \"example@example.com\" }
```
Sending `email=false` will suppress sending the email
```
{ \"email\": false }
```
#### Behavior
Users with a password will be sent a Welcome email to:
  - The address specified in `email` flag in the request
  - If no `email` flag, the user's primary email address (default behavior)
Users without a password will be sent an Activation email to:
  - The address specified in `email` flag in the request
  - If no `email` flag, the user's alternate email address (default behavior)
  - If no alternate email address, the user's primary email address (default behavior)

#### Sample Request
```
curl -X POST https://console.jumpcloud.com/api/systemusers/{id}/state/activate \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: <api-key>' \\
  -d '{ \"email\": \"alternate-activation-email@email.com\" }'

```
.Description
This endpoint changes the state of a STAGED user to ACTIVATED.
#### Email Flag
Use the \"email\" flag to determine whether or not to send a Welcome or
Activation email to the newly activated user.
Sending an empty body
without the `email` flag, will send an email with default behavior
(see the \"Behavior\" section below)
```
{}
```
Sending `email=true` flag will send an email with default behavior (see `Behavior` below)
```
{ \"email\": true }
```
Populated email will override the default behavior and send to the specified email value
```
{ \"email\": \"example@example.com\" }
```
Sending `email=false` will suppress sending the email
```
{ \"email\": false }
```
#### Behavior
Users with a password will be sent a Welcome email to:
  - The address specified in `email` flag in the request
  - If no `email` flag, the user's primary email address (default behavior)
Users without a password will be sent an Activation email to:
  - The address specified in `email` flag in the request
  - If no `email` flag, the user's alternate email address (default behavior)
  - If no alternate email address, the user's primary email address (default behavior)

#### Sample Request
```
curl -X POST https://console.jumpcloud.com/api/systemusers/{id}/state/activate \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: <api-key>' \\
  -d '{ \"email\": \"alternate-activation-email@email.com\" }'

```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Inputs
JumpCloud.SDK.V1.Models.IPathsDi9CukSystemusersIdStateActivatePostRequestbodyContentApplicationJsonSchema
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

BODY <IPathsDi9CukSystemusersIdStateActivatePostRequestbodyContentApplicationJsonSchema>: .
  [Email <String>]:

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Initialize-JcSdkUserState.md
#>

function Initialize-JcSdkUserState {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='ActivateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='ActivateExpanded', Mandatory)]
    [Parameter(ParameterSetName='Activate', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='ActivateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='ActivateViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(ParameterSetName='ActivateExpanded')]
    [Parameter(ParameterSetName='ActivateViaIdentityExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Email},

    [Parameter(ParameterSetName='Activate', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='ActivateViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.IPathsDi9CukSystemusersIdStateActivatePostRequestbodyContentApplicationJsonSchema]
    # .
    # To construct, see NOTES section for BODY properties and create a hash table.
    ${Body},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            ActivateExpanded = 'JumpCloud.SDK.V1.custom\Initialize-JcSdkUserState';
            Activate = 'JumpCloud.SDK.V1.custom\Initialize-JcSdkUserState';
            ActivateViaIdentityExpanded = 'JumpCloud.SDK.V1.custom\Initialize-JcSdkUserState';
            ActivateViaIdentity = 'JumpCloud.SDK.V1.custom\Initialize-JcSdkUserState';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint allows you to launch a command based on a defined trigger.

#### Sample Requests

**Launch a Command via a Trigger**

```
curl --silent \\
     -X 'POST' \\
     -H \"x-api-key: {API_KEY}\" \\
     \"https://console.jumpcloud.com/api/command/trigger/{TriggerName}\"
```
**Launch a Command via a Trigger passing a JSON object to the command**
```
curl --silent \\
     -X 'POST' \\
     -H \"x-api-key: {API_KEY}\" \\
     -H 'Accept: application/json' \\
     -H 'Content-Type: application/json' \\
     -d '{ \"srcip\":\"192.168.2.32\", \"attack\":\"Cross Site Scripting Attempt\" }' \\
     \"https://console.jumpcloud.com/api/command/trigger/{TriggerName}\"
```
.Description
This endpoint allows you to launch a command based on a defined trigger.

#### Sample Requests

**Launch a Command via a Trigger**

```
curl --silent \\
     -X 'POST' \\
     -H \"x-api-key: {API_KEY}\" \\
     \"https://console.jumpcloud.com/api/command/trigger/{TriggerName}\"
```
**Launch a Command via a Trigger passing a JSON object to the command**
```
curl --silent \\
     -X 'POST' \\
     -H \"x-api-key: {API_KEY}\" \\
     -H 'Accept: application/json' \\
     -H 'Content-Type: application/json' \\
     -d '{ \"srcip\":\"192.168.2.32\", \"attack\":\"Cross Site Scripting Attempt\" }' \\
     \"https://console.jumpcloud.com/api/command/trigger/{TriggerName}\"
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Invoke-JcSdkCommandTrigger.md
#>

function Invoke-JcSdkCommandTrigger {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Post', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Post', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Triggername},

    [Parameter(ParameterSetName='PostViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Post = 'JumpCloud.SDK.V1.custom\Invoke-JcSdkCommandTrigger';
            PostViaIdentity = 'JumpCloud.SDK.V1.custom\Invoke-JcSdkCommandTrigger';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint allows you to expire a user's password.
.Description
This endpoint allows you to expire a user's password.
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Invoke-JcSdkExpireUserPassword.md
#>

function Invoke-JcSdkExpireUserPassword {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Post', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Post', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='PostViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Post = 'JumpCloud.SDK.V1.custom\Invoke-JcSdkExpireUserPassword';
            PostViaIdentity = 'JumpCloud.SDK.V1.custom\Invoke-JcSdkExpireUserPassword';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint allows you to run the lock command on the specified device.
If a device is offline, the command will be run when the device becomes available.

#### Sample Request
```
curl -X POST \\
  https://console.jumpcloud.com/api/systems/{system_id}/command/builtin/lock \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d {}
```
.Description
This endpoint allows you to run the lock command on the specified device.
If a device is offline, the command will be run when the device becomes available.

#### Sample Request
```
curl -X POST \\
  https://console.jumpcloud.com/api/systems/{system_id}/command/builtin/lock \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d {}
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Lock-JcSdkSystem.md
#>

function Lock-JcSdkSystem {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Lock', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Lock', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${SystemId},

    [Parameter(ParameterSetName='LockViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Lock = 'JumpCloud.SDK.V1.custom\Lock-JcSdkSystem';
            LockViaIdentity = 'JumpCloud.SDK.V1.custom\Lock-JcSdkSystem';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
The endpoint adds a new SSO / SAML Applications.
.Description
The endpoint adds a new SSO / SAML Applications.
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IApplication
.Outputs
JumpCloud.SDK.V1.Models.IApplication
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

BODY <IApplication>: Application
  Config <IApplicationConfig>:
    [AcUrlLabel <String>]:
    [AcUrlOptions <String>]:
    [AcUrlPosition <Int32?>]:
    [AcUrlReadOnly <Boolean?>]:
    [AcUrlRequired <Boolean?>]:
    [AcUrlToggle <String>]:
    [AcUrlType <String>]:
    [AcUrlValue <String>]:
    [AcUrlVisible <Boolean?>]:
    [AcsUrlTooltipTemplate <String>]:
    [AcsUrlTooltipVariablesIcon <String>]:
    [AcsUrlTooltipVariablesMessage <String>]:
    [ConstantAttributeLabel <String>]:
    [ConstantAttributeMutable <Boolean?>]:
    [ConstantAttributeOptions <String>]:
    [ConstantAttributePosition <Int32?>]:
    [ConstantAttributeReadOnly <Boolean?>]:
    [ConstantAttributeRequired <Boolean?>]:
    [ConstantAttributeToggle <String>]:
    [ConstantAttributeType <String>]:
    [ConstantAttributeValue <IApplicationConfigConstantAttributesValueItem[]>]:
      [Name <String>]:
      [ReadOnly <Boolean?>]:
      [Required <Boolean?>]:
      [Value <String>]:
      [Visible <Boolean?>]:
    [ConstantAttributeVisible <Boolean?>]:
    [ConstantAttributesTooltipTemplate <String>]:
    [ConstantAttributesTooltipVariablesIcon <String>]:
    [ConstantAttributesTooltipVariablesMessage <String>]:
    [DatabaseAttributePosition <Int32?>]:
    [IdpCertificateLabel <String>]:
    [IdpCertificateOptions <String>]:
    [IdpCertificatePosition <Int32?>]:
    [IdpCertificateReadOnly <Boolean?>]:
    [IdpCertificateRequired <Boolean?>]:
    [IdpCertificateToggle <String>]:
    [IdpCertificateTooltipTemplate <String>]:
    [IdpCertificateTooltipVariablesIcon <String>]:
    [IdpCertificateTooltipVariablesMessage <String>]:
    [IdpCertificateType <String>]:
    [IdpCertificateValue <String>]:
    [IdpCertificateVisible <Boolean?>]:
    [IdpEntityIdLabel <String>]:
    [IdpEntityIdOptions <String>]:
    [IdpEntityIdPosition <Int32?>]:
    [IdpEntityIdReadOnly <Boolean?>]:
    [IdpEntityIdRequired <Boolean?>]:
    [IdpEntityIdToggle <String>]:
    [IdpEntityIdTooltipTemplate <String>]:
    [IdpEntityIdTooltipVariablesIcon <String>]:
    [IdpEntityIdTooltipVariablesMessage <String>]:
    [IdpEntityIdType <String>]:
    [IdpEntityIdValue <String>]:
    [IdpEntityIdVisible <Boolean?>]:
    [IdpPrivateKeyLabel <String>]:
    [IdpPrivateKeyOptions <String>]:
    [IdpPrivateKeyPosition <Int32?>]:
    [IdpPrivateKeyReadOnly <Boolean?>]:
    [IdpPrivateKeyRequired <Boolean?>]:
    [IdpPrivateKeyToggle <String>]:
    [IdpPrivateKeyTooltipTemplate <String>]:
    [IdpPrivateKeyTooltipVariablesIcon <String>]:
    [IdpPrivateKeyTooltipVariablesMessage <String>]:
    [IdpPrivateKeyType <String>]:
    [IdpPrivateKeyValue <String>]:
    [IdpPrivateKeyVisible <Boolean?>]:
    [SignAssertionLabel <String>]:
    [SignAssertionPosition <Int32?>]:
    [SignAssertionReadOnly <Boolean?>]:
    [SignAssertionRequired <Boolean?>]:
    [SignAssertionTooltipTemplate <String>]:
    [SignAssertionTooltipVariablesIcon <String>]:
    [SignAssertionTooltipVariablesMessage <String>]:
    [SignAssertionType <String>]:
    [SignAssertionValue <Boolean?>]:
    [SignAssertionVisible <Boolean?>]:
    [SignResponseLabel <String>]:
    [SignResponsePosition <Int32?>]:
    [SignResponseReadOnly <Boolean?>]:
    [SignResponseRequired <Boolean?>]:
    [SignResponseTooltipTemplate <String>]:
    [SignResponseTooltipVariablesIcon <String>]:
    [SignResponseTooltipVariablesMessage <String>]:
    [SignResponseType <String>]:
    [SignResponseValue <Boolean?>]:
    [SignResponseVisible <Boolean?>]:
    [SpEntityIdLabel <String>]:
    [SpEntityIdOptions <String>]:
    [SpEntityIdPosition <Int32?>]:
    [SpEntityIdReadOnly <Boolean?>]:
    [SpEntityIdRequired <Boolean?>]:
    [SpEntityIdToggle <String>]:
    [SpEntityIdTooltipTemplate <String>]:
    [SpEntityIdTooltipVariablesIcon <String>]:
    [SpEntityIdTooltipVariablesMessage <String>]:
    [SpEntityIdType <String>]:
    [SpEntityIdValue <String>]:
    [SpEntityIdVisible <Boolean?>]:
    [SpErrorFlowLabel <String>]:
    [SpErrorFlowPosition <Int32?>]:
    [SpErrorFlowReadOnly <Boolean?>]:
    [SpErrorFlowRequired <Boolean?>]:
    [SpErrorFlowTooltipTemplate <String>]:
    [SpErrorFlowTooltipVariablesIcon <String>]:
    [SpErrorFlowTooltipVariablesMessage <String>]:
    [SpErrorFlowType <String>]:
    [SpErrorFlowValue <Boolean?>]:
    [SpErrorFlowVisible <Boolean?>]:
  Name <String>:
  SsoUrl <String>:
  [Active <Boolean?>]:
  [Beta <Boolean?>]:
  [Color <String>]:
  [Created <String>]:
  [DatabaseAttributes <IApplicationDatabaseAttributesItem[]>]:
  [Description <String>]:
  [DisplayLabel <String>]:
  [DisplayName <String>]:
  [Id <String>]:
  [LearnMore <String>]:
  [LogoColor <String>]:
  [LogoUrl <String>]:
  [Organization <String>]:
  [SsoBeta <Boolean?>]:
  [SsoHidden <Boolean?>]:
  [SsoIdpCertExpirationAt <DateTime?>]:
  [SsoJit <Boolean?>]:
  [SsoType <String>]:

CONFIG <IApplicationConfig>: .
  [AcUrlLabel <String>]:
  [AcUrlOptions <String>]:
  [AcUrlPosition <Int32?>]:
  [AcUrlReadOnly <Boolean?>]:
  [AcUrlRequired <Boolean?>]:
  [AcUrlToggle <String>]:
  [AcUrlType <String>]:
  [AcUrlValue <String>]:
  [AcUrlVisible <Boolean?>]:
  [AcsUrlTooltipTemplate <String>]:
  [AcsUrlTooltipVariablesIcon <String>]:
  [AcsUrlTooltipVariablesMessage <String>]:
  [ConstantAttributeLabel <String>]:
  [ConstantAttributeMutable <Boolean?>]:
  [ConstantAttributeOptions <String>]:
  [ConstantAttributePosition <Int32?>]:
  [ConstantAttributeReadOnly <Boolean?>]:
  [ConstantAttributeRequired <Boolean?>]:
  [ConstantAttributeToggle <String>]:
  [ConstantAttributeType <String>]:
  [ConstantAttributeValue <IApplicationConfigConstantAttributesValueItem[]>]:
    [Name <String>]:
    [ReadOnly <Boolean?>]:
    [Required <Boolean?>]:
    [Value <String>]:
    [Visible <Boolean?>]:
  [ConstantAttributeVisible <Boolean?>]:
  [ConstantAttributesTooltipTemplate <String>]:
  [ConstantAttributesTooltipVariablesIcon <String>]:
  [ConstantAttributesTooltipVariablesMessage <String>]:
  [DatabaseAttributePosition <Int32?>]:
  [IdpCertificateLabel <String>]:
  [IdpCertificateOptions <String>]:
  [IdpCertificatePosition <Int32?>]:
  [IdpCertificateReadOnly <Boolean?>]:
  [IdpCertificateRequired <Boolean?>]:
  [IdpCertificateToggle <String>]:
  [IdpCertificateTooltipTemplate <String>]:
  [IdpCertificateTooltipVariablesIcon <String>]:
  [IdpCertificateTooltipVariablesMessage <String>]:
  [IdpCertificateType <String>]:
  [IdpCertificateValue <String>]:
  [IdpCertificateVisible <Boolean?>]:
  [IdpEntityIdLabel <String>]:
  [IdpEntityIdOptions <String>]:
  [IdpEntityIdPosition <Int32?>]:
  [IdpEntityIdReadOnly <Boolean?>]:
  [IdpEntityIdRequired <Boolean?>]:
  [IdpEntityIdToggle <String>]:
  [IdpEntityIdTooltipTemplate <String>]:
  [IdpEntityIdTooltipVariablesIcon <String>]:
  [IdpEntityIdTooltipVariablesMessage <String>]:
  [IdpEntityIdType <String>]:
  [IdpEntityIdValue <String>]:
  [IdpEntityIdVisible <Boolean?>]:
  [IdpPrivateKeyLabel <String>]:
  [IdpPrivateKeyOptions <String>]:
  [IdpPrivateKeyPosition <Int32?>]:
  [IdpPrivateKeyReadOnly <Boolean?>]:
  [IdpPrivateKeyRequired <Boolean?>]:
  [IdpPrivateKeyToggle <String>]:
  [IdpPrivateKeyTooltipTemplate <String>]:
  [IdpPrivateKeyTooltipVariablesIcon <String>]:
  [IdpPrivateKeyTooltipVariablesMessage <String>]:
  [IdpPrivateKeyType <String>]:
  [IdpPrivateKeyValue <String>]:
  [IdpPrivateKeyVisible <Boolean?>]:
  [SignAssertionLabel <String>]:
  [SignAssertionPosition <Int32?>]:
  [SignAssertionReadOnly <Boolean?>]:
  [SignAssertionRequired <Boolean?>]:
  [SignAssertionTooltipTemplate <String>]:
  [SignAssertionTooltipVariablesIcon <String>]:
  [SignAssertionTooltipVariablesMessage <String>]:
  [SignAssertionType <String>]:
  [SignAssertionValue <Boolean?>]:
  [SignAssertionVisible <Boolean?>]:
  [SignResponseLabel <String>]:
  [SignResponsePosition <Int32?>]:
  [SignResponseReadOnly <Boolean?>]:
  [SignResponseRequired <Boolean?>]:
  [SignResponseTooltipTemplate <String>]:
  [SignResponseTooltipVariablesIcon <String>]:
  [SignResponseTooltipVariablesMessage <String>]:
  [SignResponseType <String>]:
  [SignResponseValue <Boolean?>]:
  [SignResponseVisible <Boolean?>]:
  [SpEntityIdLabel <String>]:
  [SpEntityIdOptions <String>]:
  [SpEntityIdPosition <Int32?>]:
  [SpEntityIdReadOnly <Boolean?>]:
  [SpEntityIdRequired <Boolean?>]:
  [SpEntityIdToggle <String>]:
  [SpEntityIdTooltipTemplate <String>]:
  [SpEntityIdTooltipVariablesIcon <String>]:
  [SpEntityIdTooltipVariablesMessage <String>]:
  [SpEntityIdType <String>]:
  [SpEntityIdValue <String>]:
  [SpEntityIdVisible <Boolean?>]:
  [SpErrorFlowLabel <String>]:
  [SpErrorFlowPosition <Int32?>]:
  [SpErrorFlowReadOnly <Boolean?>]:
  [SpErrorFlowRequired <Boolean?>]:
  [SpErrorFlowTooltipTemplate <String>]:
  [SpErrorFlowTooltipVariablesIcon <String>]:
  [SpErrorFlowTooltipVariablesMessage <String>]:
  [SpErrorFlowType <String>]:
  [SpErrorFlowValue <Boolean?>]:
  [SpErrorFlowVisible <Boolean?>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/New-JcSdkApplication.md
#>

function New-JcSdkApplication {
[OutputType([JumpCloud.SDK.V1.Models.IApplication])]
[CmdletBinding(DefaultParameterSetName='Create', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Create', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.IApplication]
    # Application
    # To construct, see NOTES section for BODY properties and create a hash table.
    ${Body},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.IApplicationConfig]
    # .
    # To construct, see NOTES section for CONFIG properties and create a hash table.
    ${Config},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${SsoUrl},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${Active},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${Beta},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Color},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Created},

    [Parameter(ParameterSetName='CreateExpanded')]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.IApplicationDatabaseAttributesItem[]]
    # .
    ${DatabaseAttributes},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Description},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${DisplayLabel},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${DisplayName},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${LearnMore},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${LogoColor},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${LogoUrl},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Organization},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${SsoBeta},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${SsoHidden},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.DateTime]
    # .
    ${SsoIdpCertExpirationAt},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${SsoJit},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${SsoType},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Create = 'JumpCloud.SDK.V1.custom\New-JcSdkApplication';
            CreateExpanded = 'JumpCloud.SDK.V1.custom\New-JcSdkApplication';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint allows you to create a new command.

NOTE: the system property in the command is not used.
Use a POST to /api/v2/commands/{id}/associations to bind a command to a system.

#### Sample Request
```
curl -X POST https://console.jumpcloud.com/api/commands/ \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json'
  -H 'x-api-key: {API_KEY}'
  -d '{\"name\":\"Test API Command\", \"command\":\"String\", \"user\":\"{UserID}\", \"schedule\":\"\", \"timeout\":\"100\"}'
```
.Description
This endpoint allows you to create a new command.

NOTE: the system property in the command is not used.
Use a POST to /api/v2/commands/{id}/associations to bind a command to a system.

#### Sample Request
```
curl -X POST https://console.jumpcloud.com/api/commands/ \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json'
  -H 'x-api-key: {API_KEY}'
  -d '{\"name\":\"Test API Command\", \"command\":\"String\", \"user\":\"{UserID}\", \"schedule\":\"\", \"timeout\":\"100\"}'
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.ICommand
.Outputs
JumpCloud.SDK.V1.Models.ICommand
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

BODY <ICommand>: Command
  Command1 <String>: The command to execute on the server.
  CommandType <String>: The Command OS
  Name <String>:
  [CommandRunners <String[]>]: An array of IDs of the Command Runner Users that can execute this command.
  [Files <String[]>]: An array of file IDs to include with the command.
  [LaunchType <String>]: How the command will execute.
  [ListensTo <String>]:
  [Organization <String>]: The ID of the organization.
  [Schedule <String>]: A crontab that consists of: [ (seconds) (minutes) (hours) (days of month) (months) (weekdays) ] or [ immediate ]. If you send this as an empty string, it will run immediately.
  [ScheduleRepeatType <String>]: When the command will repeat.
  [ScheduleYear <Int32?>]: The year that a scheduled command will launch in.
  [Shell <String>]: The shell used to run the command.
  [Sudo <Boolean?>]:
  [Template <String>]: The template this command was created from
  [TimeToLiveSeconds <Int32?>]: Time in seconds a command can wait in the queue to be run before timing out
  [Timeout <String>]: The time in seconds to allow the command to run for.
  [Trigger <String>]: The name of the command trigger.
  [User <String>]: The ID of the system user to run the command as. This field is required when creating a command with a commandType of "mac" or "linux".
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/New-JcSdkCommand.md
#>

function New-JcSdkCommand {
[OutputType([JumpCloud.SDK.V1.Models.ICommand])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # The command to execute on the server.
    ${Command},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # The Command OS
    ${CommandType},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded')]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String[]]
    # An array of IDs of the Command Runner Users that can execute this command.
    ${CommandRunners},

    [Parameter(ParameterSetName='CreateExpanded')]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String[]]
    # An array of file IDs to include with the command.
    ${Files},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # How the command will execute.
    ${LaunchType},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${ListensTo},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # The ID of the organization.
    ${Organization},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # A crontab that consists of: [ (seconds) (minutes) (hours) (days of month) (months) (weekdays) ] or [ immediate ].
    # If you send this as an empty string, it will run immediately.
    ${Schedule},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # When the command will repeat.
    ${ScheduleRepeatType},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Int32]
    # The year that a scheduled command will launch in.
    ${ScheduleYear},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # The shell used to run the command.
    ${Shell},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${Sudo},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # The template this command was created from
    ${Template},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Int32]
    # Time in seconds a command can wait in the queue to be run before timing out
    ${TimeToLiveSeconds},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # The time in seconds to allow the command to run for.
    ${Timeout},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # The name of the command trigger.
    ${Trigger},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # The ID of the system user to run the command as.
    # This field is required when creating a command with a commandType of "mac" or "linux".
    ${User},

    [Parameter(ParameterSetName='Create', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.ICommand]
    # Command
    # To construct, see NOTES section for BODY properties and create a hash table.
    ${Body},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            CreateExpanded = 'JumpCloud.SDK.V1.custom\New-JcSdkCommand';
            Create = 'JumpCloud.SDK.V1.custom\New-JcSdkCommand';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint allows you to create RADIUS servers in your organization.

#### Sample Request
```
curl -X POST https://console.jumpcloud.com/api/radiusservers/ \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d '{
    \"name\": \"{test_radius}\",
    \"networkSourceIp\": \"{0.0.0.0}\",
    \"sharedSecret\":\"{secretpassword}\",
    \"userLockoutAction\": \"REMOVE\",
    \"userPasswordExpirationAction\": \"MAINTAIN\"
}'
```
.Description
This endpoint allows you to create RADIUS servers in your organization.

#### Sample Request
```
curl -X POST https://console.jumpcloud.com/api/radiusservers/ \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d '{
    \"name\": \"{test_radius}\",
    \"networkSourceIp\": \"{0.0.0.0}\",
    \"sharedSecret\":\"{secretpassword}\",
    \"userLockoutAction\": \"REMOVE\",
    \"userPasswordExpirationAction\": \"MAINTAIN\"
}'
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IRadiusserverpost
.Outputs
JumpCloud.SDK.V1.Models.IRadiusserver
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

BODY <IRadiusserverpost>: RadiusServerPost
  Name <String>:
  NetworkSourceIP <String>:
  SharedSecret <String>: RADIUS shared secret between the server and client.
  [AuthIdp <String>]:
  [CaCert <String>]:
  [DeviceCertEnabled <Boolean?>]:
  [Mfa <String>]:
  [UserCertEnabled <Boolean?>]:
  [UserLockoutAction <String>]:
  [UserPasswordEnabled <Boolean?>]:
  [UserPasswordExpirationAction <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/New-JcSdkRadiusServer.md
#>

function New-JcSdkRadiusServer {
[OutputType([JumpCloud.SDK.V1.Models.IRadiusserver])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${NetworkSourceIP},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # RADIUS shared secret between the server and client.
    ${SharedSecret},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${AuthIdp},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${CaCert},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${DeviceCertEnabled},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Mfa},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${UserCertEnabled},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${UserLockoutAction},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${UserPasswordEnabled},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${UserPasswordExpirationAction},

    [Parameter(ParameterSetName='Create', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.IRadiusserverpost]
    # RadiusServerPost
    # To construct, see NOTES section for BODY properties and create a hash table.
    ${Body},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            CreateExpanded = 'JumpCloud.SDK.V1.custom\New-JcSdkRadiusServer';
            Create = 'JumpCloud.SDK.V1.custom\New-JcSdkRadiusServer';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
\"This endpoint allows you to create a new system user.

#### Default User State
The `state` of the user can be explicitly passed in or omitted.
If
`state` is omitted from the request, then the user will get created
using the value returned from the
[Get an Organization](https://docs.jumpcloud.com/api/1.0/index.html#operation/organizations_get)
endpoint.
The default user state for manually created users is stored in
`settings.newSystemUserStateDefaults.manualEntry`

These default state values can be changed in the admin portal settings
or by using the
[Update an Organization](https://docs.jumpcloud.com/api/1.0/index.html#operation/organization_put)
endpoint.

#### Sample Request

```
curl -X POST https://console.jumpcloud.com/api/systemusers \\
-H 'Accept: application/json' \\
-H 'Content-Type: application/json' \\
-H 'x-api-key: {API_KEY}' \\
-d '{
      \"username\":\"{username}\",
      \"email\":\"{email_address}\",
      \"firstname\":\"{Name}\",
      \"lastname\":\"{Name}\"
    }'
```
.Description
\"This endpoint allows you to create a new system user.

#### Default User State
The `state` of the user can be explicitly passed in or omitted.
If
`state` is omitted from the request, then the user will get created
using the value returned from the
[Get an Organization](https://docs.jumpcloud.com/api/1.0/index.html#operation/organizations_get)
endpoint.
The default user state for manually created users is stored in
`settings.newSystemUserStateDefaults.manualEntry`

These default state values can be changed in the admin portal settings
or by using the
[Update an Organization](https://docs.jumpcloud.com/api/1.0/index.html#operation/organization_put)
endpoint.

#### Sample Request

```
curl -X POST https://console.jumpcloud.com/api/systemusers \\
-H 'Accept: application/json' \\
-H 'Content-Type: application/json' \\
-H 'x-api-key: {API_KEY}' \\
-d '{
      \"username\":\"{username}\",
      \"email\":\"{email_address}\",
      \"firstname\":\"{Name}\",
      \"lastname\":\"{Name}\"
    }'
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.ISystemuserputpost
.Outputs
JumpCloud.SDK.V1.Models.ISystemuserreturn
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

ADDRESSES <ISystemuserputpostAddressesItem[]>: .
  [Country <String>]:
  [ExtendedAddress <String>]:
  [Locality <String>]:
  [PoBox <String>]:
  [PostalCode <String>]:
  [Region <String>]:
  [StreetAddress <String>]:
  [Type <String>]:

ATTRIBUTES <ISystemuserputpostAttributesItem[]>: .
  [Name <String>]:
  [Value <String>]:

BODY <ISystemuserputpost>: SystemUserPost
  Email <String>:
  Username <String>:
  [AccountLocked <Boolean?>]:
  [Activated <Boolean?>]:
  [Addresses <ISystemuserputpostAddressesItem[]>]:
    [Country <String>]:
    [ExtendedAddress <String>]:
    [Locality <String>]:
    [PoBox <String>]:
    [PostalCode <String>]:
    [Region <String>]:
    [StreetAddress <String>]:
    [Type <String>]:
  [AllowPublicKey <Boolean?>]:
  [AlternateEmail <String>]:
  [Attributes <ISystemuserputpostAttributesItem[]>]:
    [Name <String>]:
    [Value <String>]:
  [Company <String>]:
  [CostCenter <String>]:
  [Department <String>]:
  [Description <String>]:
  [DisableDeviceMaxLoginAttempts <Boolean?>]:
  [Displayname <String>]:
  [EmployeeIdentifier <String>]: Must be unique per user.
  [EmployeeType <String>]:
  [EnableManagedUid <Boolean?>]:
  [EnableUserPortalMultifactor <Boolean?>]:
  [ExternalDn <String>]:
  [ExternalPasswordExpirationDate <DateTime?>]:
  [ExternalSourceType <String>]:
  [ExternallyManaged <Boolean?>]:
  [Firstname <String>]:
  [JobTitle <String>]:
  [Lastname <String>]:
  [LdapBindingUser <Boolean?>]:
  [Location <String>]:
  [ManagedAppleId <String>]:
  [Manager <String>]: Relation with another systemuser to identify the last as a manager.
  [MfaConfigured <Boolean?>]:
  [MfaExclusion <Boolean?>]:
  [MfaExclusionDays <Int32?>]:
  [MfaExclusionUntil <DateTime?>]:
  [Middlename <String>]:
  [Password <String>]:
  [PasswordNeverExpires <Boolean?>]:
  [PasswordlessSudo <Boolean?>]:
  [PhoneNumbers <ISystemuserputpostPhoneNumbersItem[]>]:
    [Number <String>]:
    [Type <String>]:
  [PublicKey <String>]:
  [RecoveryEmailAddress <String>]:
  [Relationships <ISystemuserputpostRelationshipsItem[]>]:
    [Type <String>]:
    [Value <String>]:
  [SambaServiceUser <Boolean?>]:
  [State <String>]:
  [Sudo <Boolean?>]:
  [Suspended <Boolean?>]:
  [UnixGuid <Int32?>]:
  [UnixUid <Int32?>]:

PHONENUMBERS <ISystemuserputpostPhoneNumbersItem[]>: .
  [Number <String>]:
  [Type <String>]:

RELATIONSHIPS <ISystemuserputpostRelationshipsItem[]>: .
  [Type <String>]:
  [Value <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/New-JcSdkUser.md
#>

function New-JcSdkUser {
[OutputType([JumpCloud.SDK.V1.Models.ISystemuserreturn])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter()]
    [JumpCloud.SDK.V1.Category('Query')]
    [System.String]
    # .
    ${FullValidationDetails},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Email},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Username},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${AccountLocked},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${Activated},

    [Parameter(ParameterSetName='CreateExpanded')]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.ISystemuserputpostAddressesItem[]]
    # .
    # To construct, see NOTES section for ADDRESSES properties and create a hash table.
    ${Addresses},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${AllowPublicKey},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${AlternateEmail},

    [Parameter(ParameterSetName='CreateExpanded')]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.ISystemuserputpostAttributesItem[]]
    # .
    # To construct, see NOTES section for ATTRIBUTES properties and create a hash table.
    ${Attributes},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Company},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${CostCenter},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Department},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Description},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${DisableDeviceMaxLoginAttempts},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Displayname},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # Must be unique per user.
    ${EmployeeIdentifier},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${EmployeeType},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${EnableManagedUid},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${EnableUserPortalMultifactor},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${ExternalDn},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.DateTime]
    # .
    ${ExternalPasswordExpirationDate},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${ExternalSourceType},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${ExternallyManaged},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Firstname},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${JobTitle},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Lastname},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${LdapBindingUser},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Location},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${ManagedAppleId},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # Relation with another systemuser to identify the last as a manager.
    ${Manager},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${MfaConfigured},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${MfaExclusion},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Int32]
    # .
    ${MfaExclusionDays},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.DateTime]
    # .
    ${MfaExclusionUntil},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Middlename},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Password},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${PasswordNeverExpires},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${PasswordlessSudo},

    [Parameter(ParameterSetName='CreateExpanded')]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.ISystemuserputpostPhoneNumbersItem[]]
    # .
    # To construct, see NOTES section for PHONENUMBERS properties and create a hash table.
    ${PhoneNumbers},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${PublicKey},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${RecoveryEmailAddress},

    [Parameter(ParameterSetName='CreateExpanded')]
    [AllowEmptyCollection()]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.ISystemuserputpostRelationshipsItem[]]
    # .
    # To construct, see NOTES section for RELATIONSHIPS properties and create a hash table.
    ${Relationships},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${SambaServiceUser},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${State},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${Sudo},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${Suspended},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Int32]
    # .
    ${UnixGuid},

    [Parameter(ParameterSetName='CreateExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Int32]
    # .
    ${UnixUid},

    [Parameter(ParameterSetName='Create', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.ISystemuserputpost]
    # SystemUserPost
    # To construct, see NOTES section for BODY properties and create a hash table.
    ${Body},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            CreateExpanded = 'JumpCloud.SDK.V1.custom\New-JcSdkUser';
            Create = 'JumpCloud.SDK.V1.custom\New-JcSdkUser';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint will create a specific System User's Public SSH Key.
.Description
This endpoint will create a specific System User's Public SSH Key.
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Inputs
JumpCloud.SDK.V1.Models.ISshkeypost
.Outputs
JumpCloud.SDK.V1.Models.ISshkeylist
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

BODY <ISshkeypost>: SSHKeyPost
  Name <String>: The name of the SSH key.
  PublicKey <String>: The Public SSH key.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/New-JcSdkUserSshKey.md
#>

function New-JcSdkUserSshKey {
[OutputType([JumpCloud.SDK.V1.Models.ISshkeylist])]
[CmdletBinding(DefaultParameterSetName='CreateExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Parameter(ParameterSetName='Create', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='CreateViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # The name of the SSH key.
    ${Name},

    [Parameter(ParameterSetName='CreateExpanded', Mandatory)]
    [Parameter(ParameterSetName='CreateViaIdentityExpanded', Mandatory)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # The Public SSH key.
    ${PublicKey},

    [Parameter(ParameterSetName='Create', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='CreateViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.ISshkeypost]
    # SSHKeyPost
    # To construct, see NOTES section for BODY properties and create a hash table.
    ${Body},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            CreateExpanded = 'JumpCloud.SDK.V1.custom\New-JcSdkUserSshKey';
            Create = 'JumpCloud.SDK.V1.custom\New-JcSdkUserSshKey';
            CreateViaIdentityExpanded = 'JumpCloud.SDK.V1.custom\New-JcSdkUserSshKey';
            CreateViaIdentity = 'JumpCloud.SDK.V1.custom\New-JcSdkUserSshKey';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
The endpoint deletes an SSO / SAML Application.
.Description
The endpoint deletes an SSO / SAML Application.
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.IApplication
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Remove-JcSdkApplication.md
#>

function Remove-JcSdkApplication {
[OutputType([JumpCloud.SDK.V1.Models.IApplication])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Delete = 'JumpCloud.SDK.V1.custom\Remove-JcSdkApplication';
            DeleteViaIdentity = 'JumpCloud.SDK.V1.custom\Remove-JcSdkApplication';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint deletes a specific command based on the Command ID.

#### Sample Request
```
curl -X DELETE https://console.jumpcloud.com/api/commands/{CommandID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'

```
.Description
This endpoint deletes a specific command based on the Command ID.

#### Sample Request
```
curl -X DELETE https://console.jumpcloud.com/api/commands/{CommandID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'

```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.ICommand
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Remove-JcSdkCommand.md
#>

function Remove-JcSdkCommand {
[OutputType([JumpCloud.SDK.V1.Models.ICommand])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Delete = 'JumpCloud.SDK.V1.custom\Remove-JcSdkCommand';
            DeleteViaIdentity = 'JumpCloud.SDK.V1.custom\Remove-JcSdkCommand';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint deletes a specific command result.

#### Sample Request
```
curl -X DELETE https://console.jumpcloud.com/api/commandresults/{CommandID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
  ````
.Description
This endpoint deletes a specific command result.

#### Sample Request
```
curl -X DELETE https://console.jumpcloud.com/api/commandresults/{CommandID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
  ````
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.ICommandresult
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Remove-JcSdkCommandResult.md
#>

function Remove-JcSdkCommandResult {
[OutputType([JumpCloud.SDK.V1.Models.ICommandresult])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Delete = 'JumpCloud.SDK.V1.custom\Remove-JcSdkCommandResult';
            DeleteViaIdentity = 'JumpCloud.SDK.V1.custom\Remove-JcSdkCommandResult';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint allows you to delete RADIUS servers in your organization.
```
curl -X DELETE https://console.jumpcloud.com/api/radiusservers/{ServerID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
```
.Description
This endpoint allows you to delete RADIUS servers in your organization.
```
curl -X DELETE https://console.jumpcloud.com/api/radiusservers/{ServerID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.IRadiusserverput
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Remove-JcSdkRadiusServer.md
#>

function Remove-JcSdkRadiusServer {
[OutputType([JumpCloud.SDK.V1.Models.IRadiusserverput])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Delete = 'JumpCloud.SDK.V1.custom\Remove-JcSdkRadiusServer';
            DeleteViaIdentity = 'JumpCloud.SDK.V1.custom\Remove-JcSdkRadiusServer';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint allows you to delete a system.
This command will cause the system to uninstall the JumpCloud agent from its self which can can take about a minute.
If the system is not connected to JumpCloud the system record will simply be removed.

#### Sample Request
```
curl -X DELETE https://console.jumpcloud.com/api/systems/{SystemID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
  ```
.Description
This endpoint allows you to delete a system.
This command will cause the system to uninstall the JumpCloud agent from its self which can can take about a minute.
If the system is not connected to JumpCloud the system record will simply be removed.

#### Sample Request
```
curl -X DELETE https://console.jumpcloud.com/api/systems/{SystemID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
  ```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.IJcSystem
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Remove-JcSdkSystem.md
#>

function Remove-JcSdkSystem {
[OutputType([JumpCloud.SDK.V1.Models.IJcSystem])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Delete = 'JumpCloud.SDK.V1.custom\Remove-JcSdkSystem';
            DeleteViaIdentity = 'JumpCloud.SDK.V1.custom\Remove-JcSdkSystem';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint allows you to delete a particular system user.

#### Sample Request
```
curl -X DELETE https://console.jumpcloud.com/api/systemusers/{UserID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
```
.Description
This endpoint allows you to delete a particular system user.

#### Sample Request
```
curl -X DELETE https://console.jumpcloud.com/api/systemusers/{UserID} \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}'
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
JumpCloud.SDK.V1.Models.ISystemuserreturn
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Remove-JcSdkUser.md
#>

function Remove-JcSdkUser {
[OutputType([JumpCloud.SDK.V1.Models.ISystemuserreturn])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Delete = 'JumpCloud.SDK.V1.custom\Remove-JcSdkUser';
            DeleteViaIdentity = 'JumpCloud.SDK.V1.custom\Remove-JcSdkUser';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint will delete a specific System User's SSH Key.
.Description
This endpoint will delete a specific System User's SSH Key.
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Remove-JcSdkUserSshKey.md
#>

function Remove-JcSdkUserSshKey {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Delete', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Delete', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='Delete', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${SystemuserId},

    [Parameter(ParameterSetName='DeleteViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Delete = 'JumpCloud.SDK.V1.custom\Remove-JcSdkUserSshKey';
            DeleteViaIdentity = 'JumpCloud.SDK.V1.custom\Remove-JcSdkUserSshKey';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint triggers the sending of a reactivation e-mail to an administrator.
.Description
This endpoint triggers the sending of a reactivation e-mail to an administrator.
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Reset-JcSdkAdministratorUserActivation.md
#>

function Reset-JcSdkAdministratorUserActivation {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Reset', PositionalBinding=$false)]
param(
    [Parameter(ParameterSetName='Reset', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='ResetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Reset = 'JumpCloud.SDK.V1.custom\Reset-JcSdkAdministratorUserActivation';
            ResetViaIdentity = 'JumpCloud.SDK.V1.custom\Reset-JcSdkAdministratorUserActivation';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint initiates a TOTP reset for an admin.
This request does not accept a body.
.Description
This endpoint initiates a TOTP reset for an admin.
This request does not accept a body.
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Reset-JcSdkAdministratorUserTotp.md
#>

function Reset-JcSdkAdministratorUserTotp {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Reset', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Reset', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='ResetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Reset = 'JumpCloud.SDK.V1.custom\Reset-JcSdkAdministratorUserTotp';
            ResetViaIdentity = 'JumpCloud.SDK.V1.custom\Reset-JcSdkAdministratorUserTotp';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint allows you to reset the TOTP key for a specified system user and put them in an TOTP MFA enrollment period.
This will result in the user being prompted to setup TOTP MFA when logging into userportal.
Please be aware that if the user does not complete TOTP MFA setup before the `exclusionUntil` date, they will be locked out of any resources that require TOTP MFA.

Please refer to our [Knowledge Base Article](https://support.jumpcloud.com/customer/en/portal/articles/2959138-using-multifactor-authentication-with-jumpcloud) on setting up MFA for more information.

#### Sample Request
```
curl -X POST \\
  https://console.jumpcloud.com/api/systemusers/{UserID}/resetmfa \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d '{\"exclusion\": true, \"exclusionUntil\": \"{date-time}\"}'

```
.Description
This endpoint allows you to reset the TOTP key for a specified system user and put them in an TOTP MFA enrollment period.
This will result in the user being prompted to setup TOTP MFA when logging into userportal.
Please be aware that if the user does not complete TOTP MFA setup before the `exclusionUntil` date, they will be locked out of any resources that require TOTP MFA.

Please refer to our [Knowledge Base Article](https://support.jumpcloud.com/customer/en/portal/articles/2959138-using-multifactor-authentication-with-jumpcloud) on setting up MFA for more information.

#### Sample Request
```
curl -X POST \\
  https://console.jumpcloud.com/api/systemusers/{UserID}/resetmfa \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d '{\"exclusion\": true, \"exclusionUntil\": \"{date-time}\"}'

```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Inputs
JumpCloud.SDK.V1.Models.IPathsYhix24SystemusersIdResetmfaPostRequestbodyContentApplicationJsonSchema
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

BODY <IPathsYhix24SystemusersIdResetmfaPostRequestbodyContentApplicationJsonSchema>: .
  [Exclusion <Boolean?>]:
  [ExclusionDays <Single?>]:
  [ExclusionUntil <DateTime?>]:

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Reset-JcSdkUserMfa.md
#>

function Reset-JcSdkUserMfa {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='ResetExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='ResetExpanded', Mandatory)]
    [Parameter(ParameterSetName='Reset', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${Id},

    [Parameter(ParameterSetName='ResetViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='ResetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(ParameterSetName='ResetExpanded')]
    [Parameter(ParameterSetName='ResetViaIdentityExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Management.Automation.SwitchParameter]
    # .
    ${Exclusion},

    [Parameter(ParameterSetName='ResetExpanded')]
    [Parameter(ParameterSetName='ResetViaIdentityExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Single]
    # .
    ${ExclusionDays},

    [Parameter(ParameterSetName='ResetExpanded')]
    [Parameter(ParameterSetName='ResetViaIdentityExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.DateTime]
    # .
    ${ExclusionUntil},

    [Parameter(ParameterSetName='Reset', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='ResetViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.IPathsYhix24SystemusersIdResetmfaPostRequestbodyContentApplicationJsonSchema]
    # .
    # To construct, see NOTES section for BODY properties and create a hash table.
    ${Body},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            ResetExpanded = 'JumpCloud.SDK.V1.custom\Reset-JcSdkUserMfa';
            Reset = 'JumpCloud.SDK.V1.custom\Reset-JcSdkUserMfa';
            ResetViaIdentityExpanded = 'JumpCloud.SDK.V1.custom\Reset-JcSdkUserMfa';
            ResetViaIdentity = 'JumpCloud.SDK.V1.custom\Reset-JcSdkUserMfa';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
This endpoint allows you to run the restart command on the specified device.
If a device is offline, the command will be run when the device becomes available.

#### Sample Request
```
curl -X POST \\
  https://console.jumpcloud.com/api/systems/{system_id}/command/builtin/restart \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d {}
```
.Description
This endpoint allows you to run the restart command on the specified device.
If a device is offline, the command will be run when the device becomes available.

#### Sample Request
```
curl -X POST \\
  https://console.jumpcloud.com/api/systems/{system_id}/command/builtin/restart \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d {}
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [Id <String>]:
  [SystemId <String>]:
  [SystemuserId <String>]:
  [Triggername <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Restart-JcSdkSystem.md
#>

function Restart-JcSdkSystem {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Restart', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Restart', Mandatory)]
    [JumpCloud.SDK.V1.Category('Path')]
    [System.String]
    # .
    ${SystemId},

    [Parameter(ParameterSetName='RestartViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Path')]
    [JumpCloud.SDK.V1.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Restart = 'JumpCloud.SDK.V1.custom\Restart-JcSdkSystem';
            RestartViaIdentity = 'JumpCloud.SDK.V1.custom\Restart-JcSdkSystem';
        }
        $cmdInfo = Get-Command -Name $mapping[$parameterSet]
        [JumpCloud.SDK.V1.Runtime.MessageAttributeHelper]::ProcessCustomAttributesAtRuntime($cmdInfo, $MyInvocation, $parameterSet, $PSCmdlet)
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

<#
.Synopsis
Return Commands in multi-record format allowing for the passing of the `filter` and `searchFilter` parameters.
This WILL NOT allow you to add a new command.
To support advanced filtering you can use the `filter` and `searchFilter` parameters that can only be passed in the body of POST /api/search/* routes.
The `filter` and `searchFilter` parameters must be passed as Content-Type application/json.
The `filter` parameter is an object with a single property, either `and` or `or` with the value of the property being an array of query expressions.
This allows you to filter records using the logic of matching ALL or ANY records in the array of query expressions.
If the `and` or `or` are not included the default behavior is to match ALL query expressions.
The `searchFilter` parameter allows text searching on supported fields by specifying a `searchTerm` and a list of `fields` to query on.
If any `field` has a partial text match on the `searchTerm` the record will be returned.

#### Sample Request
Exact search for a list of commands in a launchType
```
curl -X POST https://console.jumpcloud.com/api/search/commands \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d '{
  \"filter\" : [{\"launchType\" : \"repeated\"}],
  \"fields\" : \"name launchType sudo\"
}'
```
Text search for commands with name
```
curl -X POST https://console.jumpcloud.com/api/search/commands \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d '{
  \"searchFilter\" : {
    \"searchTerm\": \"List\",
    \"fields\": [\"name\"]
  },
  \"fields\" : \"name launchType sudo\"
}'
```
Text search for multiple commands
```
curl -X POST https://console.jumpcloud.com/api/search/commands \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d '{
  \"searchFilter\" : {
    \"searchTerm\": [\"List\", \"Log\"],
    \"fields\": [\"name\"]
  },
  \"fields\" : \"name launchType sudo\"
}'
```
Combining `filter` and `searchFilter` to text search for commands with name who are in a list of launchType
```
curl -X POST https://console.jumpcloud.com/api/search/commands \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d '{
  \"searchFilter\": {
    \"searchTerm\": \"List\",
    \"fields\": [\"name\"]
  },
  \"filter\": {
    \"or\": [
      {\"launchType\" : \"repeated\"},
      {\"launchType\" : \"one-time\"}
    ]
  },
  \"fields\" : \"name launchType sudo\"
}'
```
.Description
Return Commands in multi-record format allowing for the passing of the `filter` and `searchFilter` parameters.
This WILL NOT allow you to add a new command.
To support advanced filtering you can use the `filter` and `searchFilter` parameters that can only be passed in the body of POST /api/search/* routes.
The `filter` and `searchFilter` parameters must be passed as Content-Type application/json.
The `filter` parameter is an object with a single property, either `and` or `or` with the value of the property being an array of query expressions.
This allows you to filter records using the logic of matching ALL or ANY records in the array of query expressions.
If the `and` or `or` are not included the default behavior is to match ALL query expressions.
The `searchFilter` parameter allows text searching on supported fields by specifying a `searchTerm` and a list of `fields` to query on.
If any `field` has a partial text match on the `searchTerm` the record will be returned.

#### Sample Request
Exact search for a list of commands in a launchType
```
curl -X POST https://console.jumpcloud.com/api/search/commands \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d '{
  \"filter\" : [{\"launchType\" : \"repeated\"}],
  \"fields\" : \"name launchType sudo\"
}'
```
Text search for commands with name
```
curl -X POST https://console.jumpcloud.com/api/search/commands \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d '{
  \"searchFilter\" : {
    \"searchTerm\": \"List\",
    \"fields\": [\"name\"]
  },
  \"fields\" : \"name launchType sudo\"
}'
```
Text search for multiple commands
```
curl -X POST https://console.jumpcloud.com/api/search/commands \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d '{
  \"searchFilter\" : {
    \"searchTerm\": [\"List\", \"Log\"],
    \"fields\": [\"name\"]
  },
  \"fields\" : \"name launchType sudo\"
}'
```
Combining `filter` and `searchFilter` to text search for commands with name who are in a list of launchType
```
curl -X POST https://console.jumpcloud.com/api/search/commands \\
  -H 'Accept: application/json' \\
  -H 'Content-Type: application/json' \\
  -H 'x-api-key: {API_KEY}' \\
  -d '{
  \"searchFilter\": {
    \"searchTerm\": \"List\",
    \"fields\": [\"name\"]
  },
  \"filter\": {
    \"or\": [
      {\"launchType\" : \"repeated\"},
      {\"launchType\" : \"one-time\"}
    ]
  },
  \"fields\" : \"name launchType sudo\"
}'
```
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}
.Example
PS C:\> {{ Add code here }}

{{ Add output here }}

.Inputs
JumpCloud.SDK.V1.Models.ISearch
.Outputs
JumpCloud.SDK.V1.Models.ICommandslist
.Notes
COMPLEX PARAMETER PROPERTIES

To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.

BODY <ISearch>: Search
  [Fields <String>]:
  [Filter <ISearchFilter>]: Dictionary of <any>
    [(Any) <Object>]: This indicates any property can be added to this object.
  [SearchFilter <ISearchFilter1>]: Dictionary of <any>
    [(Any) <Object>]: This indicates any property can be added to this object.
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V1/docs/exports/Search-JcSdkCommand.md
#>

function Search-JcSdkCommand {
[OutputType([JumpCloud.SDK.V1.Models.ICommandslist])]
[CmdletBinding(DefaultParameterSetName='SearchExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='SearchExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.String]
    # .
    ${Fields},

    [Parameter(ParameterSetName='SearchExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Runtime.Info(PossibleTypes=([JumpCloud.SDK.V1.Models.ISearchFilter]))]
    [System.Collections.Hashtable]
    # Dictionary of <any>
    ${Filter},

    [Parameter(ParameterSetName='SearchExpanded')]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Runtime.Info(PossibleTypes=([JumpCloud.SDK.V1.Models.ISearchFilter1]))]
    [System.Collections.Hashtable]
    # Dictionary of <any>
    ${SearchFilter},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Body')]
    [System.Boolean]
    # Set to $true to return all results.
    # This will overwrite any skip and limit parameter.
    ${Paginate},

    [Parameter(ParameterSetName='Search', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V1.Category('Body')]
    [JumpCloud.SDK.V1.Models.ISearch]
    # Search
    # To construct, see NOTES section for BODY properties and create a hash table.
    ${Body},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]
    [JumpCloud.SDK.V1.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V1.Category('Runtime')]