internal/Grant-JcSdkInternalWorkday.ps1


# ----------------------------------------------------------------------------------
# Code generated by Microsoft (R) AutoRest Code Generator (autorest: 3.6.6, generator: @autorest/powershell@3.0.463)
# Changes may cause incorrect behavior and will be lost if the code is regenerated.
# ----------------------------------------------------------------------------------

<#
.Synopsis
This endpoint adds an authorization method to a workday instance.\n\nYou must supply a username and password for `Basic Authentication` that is the same as your WorkDay Integrator System User.
Failure to provide these credentials will result in the request being rejected.\n\nCurrently `O-Auth` isn't a supported authentication protocol for WorkDay, but will be in the future.\n\n#### Sample Request\n\n```\ncurl -X POST https://console.jumpcloud.com/api/v2/workdays/{WorkDayID}/auth \\\n -H 'Accept: application/json' \\\n -H 'Content-Type: application/json' \\\n -H 'x-api-key: {API_KEY}' \\\n -d '{\n\t\"auth\":{\n\t \"basic\": {\n\t\t\"username\": \"someDeveloper\",\t \n\t\t\"password\": \"notTheRealPassword\"\n\n\t }\n\t}\n}'\n\n```
.Description
This endpoint adds an authorization method to a workday instance.\n\nYou must supply a username and password for `Basic Authentication` that is the same as your WorkDay Integrator System User.
Failure to provide these credentials will result in the request being rejected.\n\nCurrently `O-Auth` isn't a supported authentication protocol for WorkDay, but will be in the future.\n\n#### Sample Request\n\n```\ncurl -X POST https://console.jumpcloud.com/api/v2/workdays/{WorkDayID}/auth \\\n -H 'Accept: application/json' \\\n -H 'Content-Type: application/json' \\\n -H 'x-api-key: {API_KEY}' \\\n -d '{\n\t\"auth\":{\n\t \"basic\": {\n\t\t\"username\": \"someDeveloper\",\t \n\t\t\"password\": \"notTheRealPassword\"\n\n\t }\n\t}\n}'\n\n```
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
JumpCloud.SDK.V2.Models.IAuthInputObject
.Inputs
JumpCloud.SDK.V2.Models.IJumpCloudApiIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
BODY <IAuthInputObject>: Auth Input Object
  [BasicPassword <String>]:
  [BasicUsername <String>]:
  [OauthCode <String>]:
 
INPUTOBJECT <IJumpCloudApiIdentity>: Identity Parameter
  [AccountId <String>]:
  [ActivedirectoryId <String>]:
  [AdministratorId <String>]:
  [AgentId <String>]:
  [AppleMdmId <String>]:
  [ApplicationId <String>]: ObjectID of the Application.
  [CommandId <String>]: ObjectID of the Command.
  [CustomEmailType <String>]:
  [DeviceId <String>]:
  [GroupId <String>]: ObjectID of the Policy Group.
  [GsuiteId <String>]: ObjectID of the G Suite instance.
  [Id <String>]: ObjectID of this Active Directory instance.
  [JobId <String>]:
  [LdapserverId <String>]: ObjectID of the LDAP Server.
  [Office365Id <String>]: ObjectID of the Office 365 instance.
  [PolicyId <String>]: ObjectID of the Policy.
  [ProviderId <String>]:
  [PushEndpointId <String>]:
  [RadiusserverId <String>]: ObjectID of the Radius Server.
  [SoftwareAppId <String>]: ObjectID of the Software App.
  [SystemId <String>]: ObjectID of the System.
  [UserId <String>]: ObjectID of the User.
  [WorkdayId <String>]:
.Link
https://github.com/TheJumpCloud/jcapi-powershell/tree/master/SDKs/PowerShell/JumpCloud.SDK.V2/docs/exports/Grant-JcSdkInternalWorkday.md
#>

function Grant-JcSdkInternalWorkday {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='AuthorizeExpanded', PositionalBinding=$false, SupportsShouldProcess, ConfirmImpact='Medium')]
param(
    [Parameter(ParameterSetName='Authorize', Mandatory)]
    [Parameter(ParameterSetName='AuthorizeExpanded', Mandatory)]
    [JumpCloud.SDK.V2.Category('Path')]
    [System.String]
    # .
    ${WorkdayId},

    [Parameter(ParameterSetName='AuthorizeViaIdentity', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='AuthorizeViaIdentityExpanded', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V2.Category('Path')]
    [JumpCloud.SDK.V2.Models.IJumpCloudApiIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(ParameterSetName='Authorize', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='AuthorizeViaIdentity', Mandatory, ValueFromPipeline)]
    [JumpCloud.SDK.V2.Category('Body')]
    [JumpCloud.SDK.V2.Models.IAuthInputObject]
    # Auth Input Object
    # To construct, see NOTES section for BODY properties and create a hash table.
    ${Body},

    [Parameter(ParameterSetName='AuthorizeExpanded')]
    [Parameter(ParameterSetName='AuthorizeViaIdentityExpanded')]
    [JumpCloud.SDK.V2.Category('Body')]
    [System.String]
    # .
    ${BasicPassword},

    [Parameter(ParameterSetName='AuthorizeExpanded')]
    [Parameter(ParameterSetName='AuthorizeViaIdentityExpanded')]
    [JumpCloud.SDK.V2.Category('Body')]
    [System.String]
    # .
    ${BasicUsername},

    [Parameter(ParameterSetName='AuthorizeExpanded')]
    [Parameter(ParameterSetName='AuthorizeViaIdentityExpanded')]
    [JumpCloud.SDK.V2.Category('Body')]
    [System.String]
    # .
    ${OauthCode},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V2.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V2.Category('Runtime')]
    [JumpCloud.SDK.V2.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V2.Category('Runtime')]
    [JumpCloud.SDK.V2.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter()]
    [JumpCloud.SDK.V2.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Returns true when the command succeeds
    ${PassThru},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V2.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [JumpCloud.SDK.V2.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [JumpCloud.SDK.V2.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Authorize = 'JumpCloud.SDK.V2.private\Grant-JcSdkInternalWorkday_Authorize';
            AuthorizeExpanded = 'JumpCloud.SDK.V2.private\Grant-JcSdkInternalWorkday_AuthorizeExpanded';
            AuthorizeViaIdentity = 'JumpCloud.SDK.V2.private\Grant-JcSdkInternalWorkday_AuthorizeViaIdentity';
            AuthorizeViaIdentityExpanded = 'JumpCloud.SDK.V2.private\Grant-JcSdkInternalWorkday_AuthorizeViaIdentityExpanded';
        }

        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}