JumpCloud

2.10.1

Private/Policies/Set-JCPolicyConfigField.ps1

function Set-JCPolicyConfigField {
    [CmdletBinding()]
    param (
        # Template Object
        [Parameter(Mandatory = $true)]
        [System.Object]
        $templateObject,
        # The existing value body for policies
        [Parameter(Mandatory = $false)]
        [System.Object]
        $policyValues,
        # The field to edit
        [Parameter(Mandatory = $true)]
        [System.String]
        $fieldIndex
    )
    begin {
        # Check to see if policyValues are explicitly stated, if not use the templateObject as current values
        if (!$policyValues) {
            $policyValues = $templateObject
        }
    }
    process {

        if ($fieldIndex) {
            $field = $templateObject[$fieldIndex]
            switch ($field.type) {
                'boolean' {
                    Do {
                        $fieldValue = (Read-Host "Please enter the $($field.type) value for the $($field.configFieldName) setting (t/f) (true/false)")
                        try {
                            if (($fieldValue -eq 't') -or ($fieldValue -eq 'true')) {
                                $fieldValue = $true
                            } elseif (($fieldValue -eq 'f') -or ($fieldValue -eq 'false')) {
                                $fieldValue = $false
                            } else {
                                $fieldValue = [System.Convert]::ToBoolean($fieldValue)
                            }
                        } catch {
                            Write-Warning "$fieldValue is not a boolean; please enter a boolean value: (t/f) (true/false)"
                        }
                        $field.value = $fieldValue
                        ($policyValues | Where-Object { $_.configFieldID -eq $field.configFieldID }).value = $fieldValue
                    } Until (($fieldValue -eq $true) -or ($fieldValue -eq $false))
                }
                'string' {
                    Do {
                        $fieldValue = (Read-Host "Please enter the $($field.type) value for the $($field.configFieldName) setting")
                        $field.value = $fieldValue
                        ($policyValues | Where-Object { $_.configFieldID -eq $field.configFieldID }).value = $fieldValue
                    } While (([string]::IsNullOrEmpty($fieldValue)))

                }
                'int' {
                    Do {
                        $fieldValue = (Read-Host "Please enter the $($field.type) value for the $($field.configFieldName) setting")
                        try {
                            $fieldValue = [int]$fieldValue
                        } catch {
                            Write-Warning "$fieldValue is not a int; please enter a int"
                        }
                        $field.value = $fieldValue
                        ($policyValues | Where-Object { $_.configFieldID -eq $field.configFieldID }).value = $fieldValue
                    } until ($fieldValue -is [int])
                }
                'multi' {
                    $field.validation | Format-Table | Out-Host
                    do {
                        $rownum = (Read-Host "Please enter the desired $($field.label) setting value (0 - $($field.validation.length - 1))")
                        try {
                            $rownum = [int]$rownum
                        } catch {
                            Write-Warning "$rownum is not a int; please enter a int"
                        }
                        $field.value = $rownum
                        ($policyValues | Where-Object { $_.configFieldID -eq $field.configFieldID }).value = $rownum

                    } While (0..[int]($field.validation.values.length - 1) -notcontains $rownum)
                }
                'listbox' {
                    $Title = "JumpCloud Policy Field Editor"
                    $Message = "Select an Action:"
                    $Modify = New-Object System.Management.Automation.Host.ChoiceDescription "&Modify", "Modify - edit existing rows"
                    $Add = New-Object System.Management.Automation.Host.ChoiceDescription "&Add", "Add - add new table rows"
                    $Remove = New-Object System.Management.Automation.Host.ChoiceDescription "&Remove", "Remove - remove existing rows"
                    $Continue = New-Object System.Management.Automation.Host.ChoiceDescription "&Continue", "Continue - save/ update policy"
                    $Options = [System.Management.Automation.Host.ChoiceDescription[]]($Modify, $Add, $Remove, $Continue)
                    # List current values if they existing
                    do {
                        if ($policyValues[$fieldIndex].value) {
                            if ($ValueObject) {
                                $valueDisplay = New-Object System.Collections.ArrayList
                                for ($i = 0; $i -lt $ValueObject.Count; $i++) {
                                    $valueDisplay.Add([PSCustomObject]@{
                                            row   = $i
                                            value = $ValueObject[$i]
                                        }) | Out-Null
                                }
                                $valueDisplay | Format-Table row, value | Out-Host
                            } else {
                                # If values, populate value display
                                $ValueObject = New-Object System.Collections.ArrayList
                                $valueDisplay = New-Object System.Collections.ArrayList
                                for ($i = 0; $i -lt $policyValues[$fieldIndex].value.Count; $i++) {
                                    $valueDisplay.Add([PSCustomObject]@{
                                            row   = $i
                                            value = $policyValues[$fieldIndex].value[$i]
                                        }) | Out-Null
                                    $ValueObject.Add($policyValues[$fieldIndex].value[$i]) | Out-Null
                                }
                                $valueDisplay | Format-Table row, value | Out-Host
                            }
                            $userChoice = $host.ui.PromptForChoice($title, $message, $options, 0)
                        } else {
                            $values = @()
                            if ($ValueObject) {
                                $valueDisplay = New-Object System.Collections.ArrayList
                                for ($i = 0; $i -lt $ValueObject.Count; $i++) {
                                    $valueDisplay.Add([PSCustomObject]@{
                                            row   = $i
                                            value = $ValueObject[$i]
                                        }) | Out-Null
                                }
                                $valueDisplay | Format-Table row, value | Out-Host
                                $userChoice = $host.ui.PromptForChoice($title, $message, $options, 0)
                            } else {
                                # No values, just prompt to enter new value (todo, skip to entering new value)
                                $ValueObject = New-Object System.Collections.ArrayList
                                $userChoice = 1
                            }
                        }
                        switch ($userChoice) {
                            0 {
                                # modify existing:
                                do {
                                    $rowNum = (Read-Host "Please enter row number you wish to modify (0 - $($ValueObject.count - 1)) ")
                                } While (0..[int](($ValueObject).Count - 1) -notcontains $rownum -or '' -eq $rowNum)
                                $singleListBoxValue = Read-Host "Please enter a text value for $($field.configFieldName)"
                                $ValueObject[$rowNum] = $singleListBoxValue
                            }
                            1 {
                                # Add new row
                                $singleListBoxValue = Read-Host "Please enter a text value for $($field.configFieldName)"
                                $ValueObject.add($singleListBoxValue) | Out-Null
                            }
                            2 {
                                # remove existing:
                                [System.Collections.ARRAYList]$ValueObjectCopy = $ValueObject
                                do {
                                    $rowNum = (Read-Host "Please enter row number you wish to remove (0 - $($ValueObject.count - 1)) ")
                                } While (0..[int](($ValueObject).Count - 1) -notcontains $rownum -or '' -eq $rowNum)
                                $ValueObjectCopy.RemoveAt($rowNum)
                                $ValueObject = $ValueObjectCopy
                            }
                            3 {
                                break
                            }

                        }
                    } While ($userChoice -ne 3)
                    # finally update values
                    $policyValues[$fieldIndex].value = $ValueObject
                }
                'file' {
                    do {
                        $filePath = Read-Host "Enter the file path location of the file for this policy"
                        $path = Test-Path -Path $filePath
                        if ($path) {
                            # convert file path to base64 string
                            $base64File = [convert]::ToBase64String((Get-Content -Path $filePath -AsByteStream))
                        }
                        if ($path -and (-not [string]::IsNullOrEmpty(($base64File)))) {
                            $fileValidated = $true
                        } else {
                            $fileValidated = $false
                        }
                    } Until ($fileValidated)
                    # Return the policy value here:
                    $policyValues[$fieldIndex].value = $base64File
                }
                'table' {
                    $Title = "JumpCloud Policy Field Editor"
                    $Message = "Select an Action:"
                    $Modify = New-Object System.Management.Automation.Host.ChoiceDescription "&Modify", "Modify - edit existing rows"
                    $Add = New-Object System.Management.Automation.Host.ChoiceDescription "&Add", "Add - add new table rows"
                    $Remove = New-Object System.Management.Automation.Host.ChoiceDescription "&Remove", "Remove - remove existing rows"
                    $Continue = New-Object System.Management.Automation.Host.ChoiceDescription "&Continue", "Continue - save/ update policy"
                    $Options = [System.Management.Automation.Host.ChoiceDescription[]]($Modify, $Add, $Remove, $Continue)
                    Do {
                        if ($policyValues[$fieldIndex].value) {
                            if ($ValueObject) {
                                $valueDisplay = New-Object System.Collections.ArrayList
                                for ($i = 0; $i -lt $ValueObject.Count; $i++) {
                                    $valueDisplay.Add([PSCustomObject]@{
                                            row   = $i
                                            value = $ValueObject[$i]
                                        }) | Out-Null
                                }
                                $valueDisplay | Format-Table row, @{Label = "customData"; Expression = { $_.value | Select-Object -ExpandProperty customData } }, @{Label = "customRegType"; Expression = { $_.value | Select-Object -ExpandProperty customRegType } }, @{Label = "customLocation"; Expression = { $_.value | Select-Object -ExpandProperty customLocation } }, @{Label = "customValueName"; Expression = { $_.value | Select-Object -ExpandProperty customValueName } } | Out-Host
                            } else {
                                # If values, populate value display
                                $ValueObject = New-Object System.Collections.ArrayList
                                $valueDisplay = New-Object System.Collections.ArrayList
                                for ($i = 0; $i -lt $policyValues[$fieldIndex].value.Count; $i++) {
                                    $valueDisplay.Add([PSCustomObject]@{
                                            row   = $i
                                            value = $policyValues[$fieldIndex].value[$i]
                                        }) | Out-Null
                                    $ValueObject.Add($policyValues[$fieldIndex].value[$i]) | Out-Null
                                }
                                $valueDisplay | Format-Table row, @{Label = "customData"; Expression = { $_.value | Select-Object -ExpandProperty customData } }, @{Label = "customRegType"; Expression = { $_.value | Select-Object -ExpandProperty customRegType } }, @{Label = "customLocation"; Expression = { $_.value | Select-Object -ExpandProperty customLocation } }, @{Label = "customValueName"; Expression = { $_.value | Select-Object -ExpandProperty customValueName } } | Out-Host
                            }
                            $userChoice = $host.ui.PromptForChoice($title, $message, $options, 0)
                        } else {
                            $values = @()
                            if ($ValueObject) {
                                $valueDisplay = New-Object System.Collections.ArrayList
                                for ($i = 0; $i -lt $ValueObject.Count; $i++) {
                                    $valueDisplay.Add([PSCustomObject]@{
                                            row   = $i
                                            value = $ValueObject[$i]
                                        }) | Out-Null
                                }
                                $valueDisplay | Format-Table row, @{Label = "customData"; Expression = { $_.value | Select-Object -ExpandProperty customData } }, @{Label = "customRegType"; Expression = { $_.value | Select-Object -ExpandProperty customRegType } }, @{Label = "customLocation"; Expression = { $_.value | Select-Object -ExpandProperty customLocation } }, @{Label = "customValueName"; Expression = { $_.value | Select-Object -ExpandProperty customValueName } } | Out-Host
                                $userChoice = $host.ui.PromptForChoice($title, $message, $options, 0)
                            } else {
                                # Case for new tables
                                $ValueObject = New-Object System.Collections.ArrayList
                                $userChoice = 1
                            }
                        }
                        switch ($userChoice) {
                            0 {
                                # Modify existing:
                                do {
                                    $rowNum = (Read-Host "Please enter row number you wish to modify (0 - $($ValueObject.count - 1)) ")
                                } While (0..[int](($ValueObject.value).Count - 1) -notcontains $rownum -or '' -eq $rowNum)
                                $tableRow = New-CustomRegistryTableRow
                                $ValueObject[$rowNum] = $tableRow
                            }
                            1 {
                                # Add new row
                                $tableRow = New-CustomRegistryTableRow
                                $ValueObject.add($tableRow) | Out-Null
                            }
                            2 {
                                # Remove existing:
                                [System.Collections.ARRAYList]$ValueObjectCopy = $ValueObject
                                do {
                                    $rowNum = (Read-Host "Please enter row number you wish to remove (0 - $($ValueObject.count - 1)) ")
                                } While (0..[int](($ValueObject.value).Count - 1) -notcontains $rownum -or '' -eq $rowNum)
                                $ValueObjectCopy.RemoveAt($rowNum) | Out-Null
                                $ValueObject = $ValueObjectCopy
                            }
                            3 {
                                break
                            }
                        }
                    } While ($userChoice -ne 3)
                    # finally update values
                    $policyValues[$fieldIndex].value = $ValueObject
                }
            }
        }
    }
    end {
        return $policyValues
    }
}