Scripts/Reskit9/All Resources/xBitlocker/Misc/xBitlockerCommon.psm1
|
#A common function used to enable Bitlocker on a disk. function EnableBitlocker { [CmdletBinding()] param ( [parameter(Mandatory = $true)] [System.String] $MountPoint, [ValidateSet("AdAccountOrGroupProtector","PasswordProtector","Pin","RecoveryKeyProtector","RecoveryPasswordProtector","StartupKeyProtector","TpmProtector")] [parameter(Mandatory = $true)] [System.String] $PrimaryProtector, [System.String] $AdAccountOrGroup, [System.Boolean] $AdAccountOrGroupProtector, [System.Boolean] $AllowImmediateReboot = $false, [System.Boolean] $AutoUnlock = $false, [ValidateSet("Aes128","Aes256")] [System.String] $EncryptionMethod, [System.Boolean] $HardwareEncryption, [System.Management.Automation.PSCredential] $Password, [System.Boolean] $PasswordProtector, [System.Management.Automation.PSCredential] $Pin, [System.String] $RecoveryKeyPath, [System.Boolean] $RecoveryKeyProtector, [System.Boolean] $RecoveryPasswordProtector, [System.Boolean] $Service, [System.Boolean] $SkipHardwareTest, [System.String] $StartupKeyPath, [System.Boolean] $StartupKeyProtector, [System.Boolean] $TpmProtector, [System.Boolean] $UsedSpaceOnly, $VerbosePreference ) Write-Verbose "Beginning processing of MountPoint: $($MountPoint)" $blv = Get-BitLockerVolume -MountPoint $MountPoint -ErrorAction SilentlyContinue if ($blv -ne $null) { #Add key protectors other than the primary key protector prior to running Enable-Bitlocker if ($PSBoundParameters.ContainsKey("AdAccountOrGroupProtector") -and $PrimaryProtector -notlike "AdAccountOrGroupProtector" -and !(ContainsKeyProtector -Type "AdAccountOrGroupProtector" -KeyProtectorCollection $blv.KeyProtector)) { Write-Verbose "Adding AdAccountOrGroupProtector" Add-BitLockerKeyProtector -MountPoint $MountPoint -AdAccountOrGroupProtector -AdAccountOrGroup $AdAccountOrGroup } if ($PSBoundParameters.ContainsKey("PasswordProtector") -and $PrimaryProtector -notlike "PasswordProtector" -and !(ContainsKeyProtector -Type "PasswordProtector" -KeyProtectorCollection $blv.KeyProtector)) { Write-Verbose "Adding PasswordProtector" Add-BitLockerKeyProtector -MountPoint $MountPoint -PasswordProtector -Password $Password.Password } if ($PSBoundParameters.ContainsKey("Pin") -and $PrimaryProtector -notlike "Pin" -and !(ContainsKeyProtector -Type "Pin" -KeyProtectorCollection $blv.KeyProtector)) { Write-Verbose "Adding Pin" Add-BitLockerKeyProtector -MountPoint $MountPoint -Pin $Pin.Password } if ($PSBoundParameters.ContainsKey("RecoveryKeyProtector") -and $PrimaryProtector -notlike "RecoveryKeyProtector" -and !(ContainsKeyProtector -Type "RecoveryKeyProtector" -KeyProtectorCollection $blv.KeyProtector)) { Write-Verbose "Adding RecoveryKeyProtector" Add-BitLockerKeyProtector -MountPoint $MountPoint -RecoveryKeyProtector -RecoveryKeyPath $RecoveryKeyPath } if ($PSBoundParameters.ContainsKey("RecoveryPasswordProtector") -and $PrimaryProtector -notlike "RecoveryPasswordProtector" -and !(ContainsKeyProtector -Type "RecoveryPasswordProtector" -KeyProtectorCollection $blv.KeyProtector)) { Write-Verbose "Adding RecoveryPasswordProtector" Add-BitLockerKeyProtector -MountPoint $MountPoint -RecoveryPasswordProtector $RecoveryPasswordProtector } if ($PSBoundParameters.ContainsKey("StartupKeyProtector") -and $PrimaryProtector -notlike "StartupKeyProtector" -and !(ContainsKeyProtector -Type "StartupKeyProtector" -KeyProtectorCollection $blv.KeyProtector)) { Write-Verbose "Adding StartupKeyProtector" Add-BitLockerKeyProtector -MountPoint $MountPoint -StartupKeyProtector -StartupKeyPath $StartupKeyPath } if ($PSBoundParameters.ContainsKey("TpmProtector") -and $PrimaryProtector -notlike "TpmProtector" -and !(ContainsKeyProtector -Type "TpmProtector" -KeyProtectorCollection $blv.KeyProtector)) { Write-Verbose "Adding TpmProtector" Add-BitLockerKeyProtector -MountPoint $MountPoint -TpmProtector $TpmProtector } #Now enable Bitlocker with the primary key protector if ($blv.VolumeStatus -eq "FullyDecrypted") { Write-Verbose "Running Enable-Bitlocker" #First add non-key related parameters $params = @{} $params.Add("MountPoint", $MountPoint) if ($PSBoundParameters.ContainsKey("EncryptionMethod")) { $params.Add("EncryptionMethod", $EncryptionMethod) } if ($PSBoundParameters.ContainsKey("HardwareEncryption")) { $params.Add("HardwareEncryption", $true) } if ($PSBoundParameters.ContainsKey("Service")) { $params.Add("Service", $true) } if ($PSBoundParameters.ContainsKey("SkipHardwareTest")) { $params.Add("SkipHardwareTest", $true) } if ($PSBoundParameters.ContainsKey("UsedSpaceOnly")) { $params.Add("UsedSpaceOnly", $true) } #Now add the primary protector if ($PrimaryProtector -like "AdAccountOrGroupProtector") { $params.Add("AdAccountOrGroupProtector", $true) $params.Add("AdAccountOrGroup", $AdAccountOrGroup) } elseif ($PrimaryProtector -like "PasswordProtector") { $params.Add("PasswordProtector", $true) $params.Add("Password", $Password.Password) } elseif ($Pin -like "Pin") { $params.Add("Pin", $Pin.Password) } elseif ($PrimaryProtector -like "RecoveryKeyProtector") { $params.Add("RecoveryKeyProtector", $true) $params.Add("RecoveryKeyPath", $RecoveryKeyPath) } elseif ($PrimaryProtector -like "RecoveryPasswordProtector") { $params.Add("RecoveryPasswordProtector", $true) } elseif ($PrimaryProtector -like "StartupKeyProtector") { $params.Add("StartupKeyProtector", $true) $params.Add("StartupKeyPath", $StartupKeyPath) } elseif ($PrimaryProtector -like "TpmProtector") { $params.Add("TpmProtector", $true) } #Run Enable-Bitlocker $newBlv = Enable-Bitlocker @params #Check if the Enable succeeded if ($newBlv -ne $null) { if ($blv.VolumeType -eq "OperatingSystem") #Only initiate reboot if this is an OS drive { if ($AllowImmediateReboot -eq $true) { Write-Verbose "Forcing an immediate reboot of the computer" Restart-Computer -Force } else { Write-Verbose "Setting DSCMachineStatus to 1" $global:DSCMachineStatus = 1 } } } else { throw "Failed to successfully enable Bitlocker on MountPoint $($MountPoint)" } #Finally, enable AutoUnlock if requested if ($AutoUnlock -eq $true -and $blv.VolumeType -ne "OperatingSystem") { Enable-BitlockerAutoUnlock -MountPoint $MountPoint } } } else { throw "Unable to find Bitlocker Volume associated with Mount Point '$($MountPoint)'" } } #A common function used to test if Bitlocker is enabled on a disk with the appropriate settings function TestBitlocker { [CmdletBinding()] [OutputType([System.Boolean])] param ( [parameter(Mandatory = $true)] [System.String] $MountPoint, [ValidateSet("AdAccountOrGroupProtector","PasswordProtector","Pin","RecoveryKeyProtector","RecoveryPasswordProtector","StartupKeyProtector","TpmProtector")] [parameter(Mandatory = $true)] [System.String] $PrimaryProtector, [System.String] $AdAccountOrGroup, [System.Boolean] $AdAccountOrGroupProtector, [System.Boolean] $AllowImmediateReboot = $false, [System.Boolean] $AutoUnlock = $false, [ValidateSet("Aes128","Aes256")] [System.String] $EncryptionMethod, [System.Boolean] $HardwareEncryption, [System.Management.Automation.PSCredential] $Password, [System.Boolean] $PasswordProtector, [System.Management.Automation.PSCredential] $Pin, [System.String] $RecoveryKeyPath, [System.Boolean] $RecoveryKeyProtector, [System.Boolean] $RecoveryPasswordProtector, [System.Boolean] $Service, [System.Boolean] $SkipHardwareTest, [System.String] $StartupKeyPath, [System.Boolean] $StartupKeyProtector, [System.Boolean] $TpmProtector, [System.Boolean] $UsedSpaceOnly, $VerbosePreference ) $blv = Get-BitLockerVolume -MountPoint $MountPoint -ErrorAction SilentlyContinue if ($blv -eq $null) { Write-Verbose "Unable to locate MountPoint: $($MountPoint)" return $false } elseif ($blv.KeyProtector -eq $null -or $blv.KeyProtector.Count -eq 0) { Write-Verbose "No key protectors on MountPoint: $($MountPoint)" return $false } elseif ($blv.VolumeStatus -eq "FullyDecrypted") { Write-Verbose "MountPoint has a status of FullyDecrypted: $($MountPoint)" return $false } elseif ($AutoUnlock -eq $true -and $blv.AutoUnlockEnabled -ne $true) { Write-Verbose "AutoUnlock is not enabled for MountPoint: $($MountPoint)" return $false } else { if ($PSBoundParameters.ContainsKey("AdAccountOrGroupProtector") -and !(ContainsKeyProtector -Type "AdAccountOrGroupProtector" -KeyProtectorCollection $blv.KeyProtector)) { Write-Verbose "MountPoint '$($MountPoint) 'does not have AdAccountOrGroupProtector" return $false } if ($PSBoundParameters.ContainsKey("PasswordProtector") -and !(ContainsKeyProtector -Type "PasswordProtector" -KeyProtectorCollection $blv.KeyProtector)) { Write-Verbose "MountPoint '$($MountPoint) 'does not have PasswordProtector" return $false } if ($PSBoundParameters.ContainsKey("RecoveryKeyProtector") -and !(ContainsKeyProtector -Type "RecoveryKeyProtector" -KeyProtectorCollection $blv.KeyProtector)) { Write-Verbose "MountPoint '$($MountPoint) 'does not have RecoveryKeyProtector" return $false } if ($PSBoundParameters.ContainsKey("StartupKeyProtector") -and !(ContainsKeyProtector -Type "StartupKeyProtector" -KeyProtectorCollection $blv.KeyProtector)) { Write-Verbose "MountPoint '$($MountPoint) 'does not have StartupKeyProtector" return $false } if ($PSBoundParameters.ContainsKey("TpmProtector") -and !(ContainsKeyProtector -Type "TpmProtector" -KeyProtectorCollection $blv.KeyProtector)) { Write-Verbose "MountPoint '$($MountPoint) 'does not have TpmProtector" return $false } } return $true } #Ensures that required Bitlocker prereqs are installed function CheckForPreReqs { $hasAllPreReqs = $true $blFeature = Get-WindowsFeature BitLocker $blAdminToolsFeature = Get-WindowsFeature RSAT-Feature-Tools-BitLocker $blAdminToolsRemoteFeature = Get-WindowsFeature RSAT-Feature-Tools-BitLocker-RemoteAdminTool if ($blFeature.InstallState -ne "Installed") { $hasAllPreReqs = $false Write-Error "The Bitlocker feature needs to be installed before the xBitlocker module can be used" } if ($blAdminToolsFeature.InstallState -ne "Installed") { $hasAllPreReqs = $false Write-Error "The RSAT-Feature-Tools-BitLocker feature needs to be installed before the xBitlocker module can be used" } if ($blAdminToolsRemoteFeature.InstallState -ne "Installed") { $hasAllPreReqs = $false Write-Error "The RSAT-Feature-Tools-BitLocker-RemoteAdminTool feature needs to be installed before the xBitlocker module can be used" } if ($hasAllPreReqs -eq $false) { throw "Required Bitlocker features need to be installed before xBitlocker can be used" } } #Checks whether the KeyProtectorCollection returned from Get-BitlockerVolume contains the specified key protector type function ContainsKeyProtector { param([string]$Type, $KeyProtectorCollection) if ($KeyProtectorCollection -ne $null) { foreach ($keyProtector in $KeyProtectorCollection) { if ($keyProtector.KeyProtectorType -eq $Type) { return $true } } } return $false } #Takes $PSBoundParameters from another function and adds in the keys and values from the given Hashtable function AddParameters { param($PSBoundParametersIn, [Hashtable]$ParamsToAdd) foreach ($key in $ParamsToAdd.Keys) { if (!($PSBoundParametersIn.ContainsKey($key))) #Key doesn't exist, so add it with value { $PSBoundParametersIn.Add($key, $ParamsToAdd[$key]) | Out-Null } else #Key already exists, so just replace the value { $PSBoundParametersIn[$key] = $ParamsToAdd[$key] } } } #Takes $PSBoundParameters from another function. If ParamsToRemove is specified, it will remove each param. #If ParamsToKeep is specified, everything but those params will be removed. If both ParamsToRemove and ParamsToKeep #are specified, only ParamsToKeep will be used. function RemoveParameters { param($PSBoundParametersIn, [string[]]$ParamsToKeep, [string[]]$ParamsToRemove) if ($ParamsToKeep -ne $null -and $ParamsToKeep.Count -gt 0) { [string[]]$ParamsToRemove = @() $lowerParamsToKeep = StringArrayToLower -Array $ParamsToKeep foreach ($key in $PSBoundParametersIn.Keys) { if (!($lowerParamsToKeep.Contains($key.ToLower()))) { $ParamsToRemove += $key } } } if ($ParamsToRemove -ne $null -and $ParamsToRemove.Count -gt 0) { foreach ($param in $ParamsToRemove) { $PSBoundParametersIn.Remove($param) | Out-Null } } } Export-ModuleMember -Function * |