exports/v1.0-beta/ProxyCmdletDefinitions.ps1


# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function compare
.Description
Invoke function compare
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceManagementSettingComparison
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/compare-mgdevicemanagementintent
#>

function Compare-MgDeviceManagementIntent {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceManagementSettingComparison])]
[CmdletBinding(DefaultParameterSetName='Compare', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Compare', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementIntent
    ${DeviceManagementIntentId},

    [Parameter(ParameterSetName='Compare', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: templateId={templateId}
    ${TemplateId},

    [Parameter(ParameterSetName='CompareViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Compare = 'Microsoft.Graph.DeviceManagement.Functions.private\Compare-MgDeviceManagementIntent_Compare';
            CompareViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Compare-MgDeviceManagementIntent_CompareViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function compare
.Description
Invoke function compare
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceManagementSettingComparison
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/compare-mgdevicemanagementtemplatemigratableto
#>

function Compare-MgDeviceManagementTemplateMigratableTo {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceManagementSettingComparison])]
[CmdletBinding(DefaultParameterSetName='Compare', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Compare', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementTemplate
    ${DeviceManagementTemplateId},

    [Parameter(ParameterSetName='Compare', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementTemplate
    ${DeviceManagementTemplateId1},

    [Parameter(ParameterSetName='Compare', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: templateId={templateId}
    ${TemplateId},

    [Parameter(ParameterSetName='CompareViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Compare = 'Microsoft.Graph.DeviceManagement.Functions.private\Compare-MgDeviceManagementTemplateMigratableTo_Compare';
            CompareViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Compare-MgDeviceManagementTemplateMigratableTo_CompareViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function compare
.Description
Invoke function compare
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceManagementSettingComparison
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/compare-mgdevicemanagementtemplate
#>

function Compare-MgDeviceManagementTemplate {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceManagementSettingComparison])]
[CmdletBinding(DefaultParameterSetName='Compare', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Compare', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementTemplate
    ${DeviceManagementTemplateId},

    [Parameter(ParameterSetName='Compare', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: templateId={templateId}
    ${TemplateId},

    [Parameter(ParameterSetName='CompareViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Compare = 'Microsoft.Graph.DeviceManagement.Functions.private\Compare-MgDeviceManagementTemplate_Compare';
            CompareViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Compare-MgDeviceManagementTemplate_CompareViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function exportMobileConfig
.Description
Invoke function exportMobileConfig
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/export-mgdevicemanagementdeponboardingsettingenrollmentprofilemobileconfig
#>

function Export-MgDeviceManagementDepOnboardingSettingEnrollmentProfileMobileConfig {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Export', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Export', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of depOnboardingSetting
    ${DepOnboardingSettingId},

    [Parameter(ParameterSetName='Export', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of enrollmentProfile
    ${EnrollmentProfileId},

    [Parameter(ParameterSetName='ExportViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Export = 'Microsoft.Graph.DeviceManagement.Functions.private\Export-MgDeviceManagementDepOnboardingSettingEnrollmentProfileMobileConfig_Export';
            ExportViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Export-MgDeviceManagementDepOnboardingSettingEnrollmentProfileMobileConfig_ExportViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getAssignedRoleDetails
.Description
Invoke function getAssignedRoleDetails
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceAndAppManagementAssignedRoleDetails
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementassignedroledetail
#>

function Get-MgDeviceManagementAssignedRoleDetail {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceAndAppManagementAssignedRoleDetails])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementAssignedRoleDetail_Get';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getAuditActivityTypes
.Description
Invoke function getAuditActivityTypes
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementauditeventauditactivitytype
#>

function Get-MgDeviceManagementAuditEventAuditActivityType {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: category={category}
    ${Category},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementAuditEventAuditActivityType_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementAuditEventAuditActivityType_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getAuditCategories
.Description
Invoke function getAuditCategories
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Outputs
System.String
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementauditeventauditcategory
#>

function Get-MgDeviceManagementAuditEventAuditCategory {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementAuditEventAuditCategory_Get';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getFileVaultKey
.Description
Invoke function getFileVaultKey
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementcomanageddevicefilevaultkey
#>

function Get-MgDeviceManagementComanagedDeviceFileVaultKey {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of managedDevice
    ${ManagedDeviceId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementComanagedDeviceFileVaultKey_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementComanagedDeviceFileVaultKey_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getNonCompliantSettings
.Description
Invoke function getNonCompliantSettings
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementcomanageddevicenoncompliantsetting
#>

function Get-MgDeviceManagementComanagedDeviceNonCompliantSetting {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of managedDevice
    ${ManagedDeviceId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementComanagedDeviceNonCompliantSetting_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementComanagedDeviceNonCompliantSetting_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getComanagedDevicesSummary
.Description
Invoke function getComanagedDevicesSummary
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphComanagedDevicesSummary
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementcomanageddevicesummary
#>

function Get-MgDeviceManagementComanagedDeviceSummary {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphComanagedDevicesSummary])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementComanagedDeviceSummary_Get';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getComanagementEligibleDevicesSummary
.Description
Invoke function getComanagementEligibleDevicesSummary
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphComanagementEligibleDevicesSummary
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementcomanagementeligibledevicesummary
#>

function Get-MgDeviceManagementComanagementEligibleDeviceSummary {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphComanagementEligibleDevicesSummary])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementComanagementEligibleDeviceSummary_Get';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getManagementConditionsForPlatform
.Description
Invoke function getManagementConditionsForPlatform
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphManagementCondition
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementconditionforplatform
#>

function Get-MgDeviceManagementConditionForPlatform {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphManagementCondition])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: platform={platform}
    ${Platform},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementConditionForPlatform_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementConditionForPlatform_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getManagementConditionsForPlatform
.Description
Invoke function getManagementConditionsForPlatform
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphManagementCondition
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementconditionstatementmanagementconditionforplatform
#>

function Get-MgDeviceManagementConditionStatementManagementConditionForPlatform {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphManagementCondition])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of managementConditionStatement
    ${ManagementConditionStatementId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: platform={platform}
    ${Platform},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementConditionStatementManagementConditionForPlatform_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementConditionStatementManagementConditionForPlatform_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getManagementConditionStatementExpressionString
.Description
Invoke function getManagementConditionStatementExpressionString
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementconditionstatementmanagementconditionstatementexpressionstring
#>

function Get-MgDeviceManagementConditionStatementManagementConditionStatementExpressionString {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of managementConditionStatement
    ${ManagementConditionStatementId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementConditionStatementManagementConditionStatementExpressionString_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementConditionStatementManagementConditionStatementExpressionString_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getManagementConditionStatementsForPlatform
.Description
Invoke function getManagementConditionStatementsForPlatform
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphManagementConditionStatement
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementconditionstatementmanagementconditionstatementforplatform
#>

function Get-MgDeviceManagementConditionStatementManagementConditionStatementForPlatform {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphManagementConditionStatement])]
[CmdletBinding(DefaultParameterSetName='Get1', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of managementCondition
    ${ManagementConditionId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Parameter(ParameterSetName='Get1', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: platform={platform}
    ${Platform},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Parameter(ParameterSetName='GetViaIdentity1', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementConditionStatementManagementConditionStatementForPlatform_Get';
            Get1 = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementConditionStatementManagementConditionStatementForPlatform_Get1';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementConditionStatementManagementConditionStatementForPlatform_GetViaIdentity';
            GetViaIdentity1 = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementConditionStatementManagementConditionStatementForPlatform_GetViaIdentity1';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getPolicySummary
.Description
Invoke function getPolicySummary
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphConfigManagerPolicySummary
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementconfigmanagercollectionpolicysummary
#>

function Get-MgDeviceManagementConfigManagerCollectionPolicySummary {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphConfigManagerPolicySummary])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: policyId={policyId}
    ${PolicyId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementConfigManagerCollectionPolicySummary_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementConfigManagerCollectionPolicySummary_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getEncryptionPublicKey
.Description
Invoke function getEncryptionPublicKey
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdeponboardingsettingencryptionpublickey
#>

function Get-MgDeviceManagementDepOnboardingSettingEncryptionPublicKey {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of depOnboardingSetting
    ${DepOnboardingSettingId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDepOnboardingSettingEncryptionPublicKey_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDepOnboardingSettingEncryptionPublicKey_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getExpiringVppTokenCount
.Description
Invoke function getExpiringVppTokenCount
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.Int32
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdeponboardingsettingexpiringvpptokencount
#>

function Get-MgDeviceManagementDepOnboardingSettingExpiringVppTokenCount {
[OutputType([System.Int32])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: expiringBeforeDateTime={expiringBeforeDateTime}
    ${ExpiringBeforeDateTime},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDepOnboardingSettingExpiringVppTokenCount_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDepOnboardingSettingExpiringVppTokenCount_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getFileVaultKey
.Description
Invoke function getFileVaultKey
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdevicecompliancescriptdevicerunstatemanageddevicefilevaultkey
#>

function Get-MgDeviceManagementDeviceComplianceScriptDeviceRunStateManagedDeviceFileVaultKey {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceComplianceScriptDeviceState
    ${DeviceComplianceScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceComplianceScript
    ${DeviceComplianceScriptId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceComplianceScriptDeviceRunStateManagedDeviceFileVaultKey_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceComplianceScriptDeviceRunStateManagedDeviceFileVaultKey_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getNonCompliantSettings
.Description
Invoke function getNonCompliantSettings
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdevicecompliancescriptdevicerunstatemanageddevicenoncompliantsetting
#>

function Get-MgDeviceManagementDeviceComplianceScriptDeviceRunStateManagedDeviceNonCompliantSetting {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceComplianceScriptDeviceState
    ${DeviceComplianceScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceComplianceScript
    ${DeviceComplianceScriptId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceComplianceScriptDeviceRunStateManagedDeviceNonCompliantSetting_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceComplianceScriptDeviceRunStateManagedDeviceNonCompliantSetting_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getIosAvailableUpdateVersions
.Description
Invoke function getIosAvailableUpdateVersions
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphIosAvailableUpdateVersion
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdeviceconfigurationioavailableupdateversion
#>

function Get-MgDeviceManagementDeviceConfigurationIoAvailableUpdateVersion {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphIosAvailableUpdateVersion])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceConfigurationIoAvailableUpdateVersion_Get';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getFileVaultKey
.Description
Invoke function getFileVaultKey
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdevicecustomattributeshellscriptdevicerunstatemanageddevicefilevaultkey
#>

function Get-MgDeviceManagementDeviceCustomAttributeShellScriptDeviceRunStateManagedDeviceFileVaultKey {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceCustomAttributeShellScript
    ${DeviceCustomAttributeShellScriptId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptDeviceState
    ${DeviceManagementScriptDeviceStateId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceCustomAttributeShellScriptDeviceRunStateManagedDeviceFileVaultKey_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceCustomAttributeShellScriptDeviceRunStateManagedDeviceFileVaultKey_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getNonCompliantSettings
.Description
Invoke function getNonCompliantSettings
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdevicecustomattributeshellscriptdevicerunstatemanageddevicenoncompliantsetting
#>

function Get-MgDeviceManagementDeviceCustomAttributeShellScriptDeviceRunStateManagedDeviceNonCompliantSetting {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceCustomAttributeShellScript
    ${DeviceCustomAttributeShellScriptId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptDeviceState
    ${DeviceManagementScriptDeviceStateId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceCustomAttributeShellScriptDeviceRunStateManagedDeviceNonCompliantSetting_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceCustomAttributeShellScriptDeviceRunStateManagedDeviceNonCompliantSetting_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getFileVaultKey
.Description
Invoke function getFileVaultKey
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdevicecustomattributeshellscriptuserrunstatedevicerunstatemanageddevicefilevaultkey
#>

function Get-MgDeviceManagementDeviceCustomAttributeShellScriptUserRunStateDeviceRunStateManagedDeviceFileVaultKey {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceCustomAttributeShellScript
    ${DeviceCustomAttributeShellScriptId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptDeviceState
    ${DeviceManagementScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptUserState
    ${DeviceManagementScriptUserStateId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceCustomAttributeShellScriptUserRunStateDeviceRunStateManagedDeviceFileVaultKey_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceCustomAttributeShellScriptUserRunStateDeviceRunStateManagedDeviceFileVaultKey_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getNonCompliantSettings
.Description
Invoke function getNonCompliantSettings
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdevicecustomattributeshellscriptuserrunstatedevicerunstatemanageddevicenoncompliantsetting
#>

function Get-MgDeviceManagementDeviceCustomAttributeShellScriptUserRunStateDeviceRunStateManagedDeviceNonCompliantSetting {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceCustomAttributeShellScript
    ${DeviceCustomAttributeShellScriptId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptDeviceState
    ${DeviceManagementScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptUserState
    ${DeviceManagementScriptUserStateId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceCustomAttributeShellScriptUserRunStateDeviceRunStateManagedDeviceNonCompliantSetting_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceCustomAttributeShellScriptUserRunStateDeviceRunStateManagedDeviceNonCompliantSetting_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getFileVaultKey
.Description
Invoke function getFileVaultKey
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdevicehealthscriptdevicerunstatemanageddevicefilevaultkey
#>

function Get-MgDeviceManagementDeviceHealthScriptDeviceRunStateManagedDeviceFileVaultKey {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceHealthScriptDeviceState
    ${DeviceHealthScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceHealthScript
    ${DeviceHealthScriptId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceHealthScriptDeviceRunStateManagedDeviceFileVaultKey_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceHealthScriptDeviceRunStateManagedDeviceFileVaultKey_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getNonCompliantSettings
.Description
Invoke function getNonCompliantSettings
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdevicehealthscriptdevicerunstatemanageddevicenoncompliantsetting
#>

function Get-MgDeviceManagementDeviceHealthScriptDeviceRunStateManagedDeviceNonCompliantSetting {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceHealthScriptDeviceState
    ${DeviceHealthScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceHealthScript
    ${DeviceHealthScriptId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceHealthScriptDeviceRunStateManagedDeviceNonCompliantSetting_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceHealthScriptDeviceRunStateManagedDeviceNonCompliantSetting_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getRemediationHistory
.Description
Invoke function getRemediationHistory
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceHealthScriptRemediationHistory
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdevicehealthscriptremediationhistory
#>

function Get-MgDeviceManagementDeviceHealthScriptRemediationHistory {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceHealthScriptRemediationHistory])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceHealthScript
    ${DeviceHealthScriptId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceHealthScriptRemediationHistory_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceHealthScriptRemediationHistory_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getRemediationSummary
.Description
Invoke function getRemediationSummary
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceHealthScriptRemediationSummary
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdevicehealthscriptremediationsummary
#>

function Get-MgDeviceManagementDeviceHealthScriptRemediationSummary {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceHealthScriptRemediationSummary])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceHealthScriptRemediationSummary_Get';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getFileVaultKey
.Description
Invoke function getFileVaultKey
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdeviceshellscriptdevicerunstatemanageddevicefilevaultkey
#>

function Get-MgDeviceManagementDeviceShellScriptDeviceRunStateManagedDeviceFileVaultKey {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptDeviceState
    ${DeviceManagementScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceShellScript
    ${DeviceShellScriptId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceShellScriptDeviceRunStateManagedDeviceFileVaultKey_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceShellScriptDeviceRunStateManagedDeviceFileVaultKey_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getNonCompliantSettings
.Description
Invoke function getNonCompliantSettings
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdeviceshellscriptdevicerunstatemanageddevicenoncompliantsetting
#>

function Get-MgDeviceManagementDeviceShellScriptDeviceRunStateManagedDeviceNonCompliantSetting {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptDeviceState
    ${DeviceManagementScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceShellScript
    ${DeviceShellScriptId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceShellScriptDeviceRunStateManagedDeviceNonCompliantSetting_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceShellScriptDeviceRunStateManagedDeviceNonCompliantSetting_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getFileVaultKey
.Description
Invoke function getFileVaultKey
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdeviceshellscriptuserrunstatedevicerunstatemanageddevicefilevaultkey
#>

function Get-MgDeviceManagementDeviceShellScriptUserRunStateDeviceRunStateManagedDeviceFileVaultKey {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptDeviceState
    ${DeviceManagementScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptUserState
    ${DeviceManagementScriptUserStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceShellScript
    ${DeviceShellScriptId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceShellScriptUserRunStateDeviceRunStateManagedDeviceFileVaultKey_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceShellScriptUserRunStateDeviceRunStateManagedDeviceFileVaultKey_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getNonCompliantSettings
.Description
Invoke function getNonCompliantSettings
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementdeviceshellscriptuserrunstatedevicerunstatemanageddevicenoncompliantsetting
#>

function Get-MgDeviceManagementDeviceShellScriptUserRunStateDeviceRunStateManagedDeviceNonCompliantSetting {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptDeviceState
    ${DeviceManagementScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptUserState
    ${DeviceManagementScriptUserStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceShellScript
    ${DeviceShellScriptId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceShellScriptUserRunStateDeviceRunStateManagedDeviceNonCompliantSetting_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementDeviceShellScriptUserRunStateDeviceRunStateManagedDeviceNonCompliantSetting_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getEffectivePermissions
.Description
Invoke function getEffectivePermissions
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Outputs
System.String
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementeffectivepermission1f5f
#>

function Get-MgDeviceManagementEffectivePermission1F5F {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementEffectivePermission1F5F_Get';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getEffectivePermissions
.Description
Invoke function getEffectivePermissions
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphRolePermission1
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementeffectivepermission49b0
#>

function Get-MgDeviceManagementEffectivePermission49B0 {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphRolePermission1])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: scope={scope}
    ${Scope},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementEffectivePermission49B0_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementEffectivePermission49B0_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getFileVaultKey
.Description
Invoke function getFileVaultKey
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementmanageddevicefilevaultkey
#>

function Get-MgDeviceManagementManagedDeviceFileVaultKey {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of managedDevice
    ${ManagedDeviceId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementManagedDeviceFileVaultKey_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementManagedDeviceFileVaultKey_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getNonCompliantSettings
.Description
Invoke function getNonCompliantSettings
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementmanageddevicenoncompliantsetting
#>

function Get-MgDeviceManagementManagedDeviceNonCompliantSetting {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of managedDevice
    ${ManagedDeviceId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementManagedDeviceNonCompliantSetting_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementManagedDeviceNonCompliantSetting_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getScopesForUser
.Description
Invoke function getScopesForUser
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementresourceoperationscope
#>

function Get-MgDeviceManagementResourceOperationScope {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of resourceOperation
    ${ResourceOperationId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: userid={userid}
    ${Userid},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementResourceOperationScope_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementResourceOperationScope_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getRoleScopeTagsByIds
.Description
Invoke function getRoleScopeTagsByIds
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphRoleScopeTag
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementrolescopetagbyid
#>

function Get-MgDeviceManagementRoleScopeTagById {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphRoleScopeTag])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Query')]
    [System.String]
    # Usage: ids={ids}
    ${Ids},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementRoleScopeTagById_Get';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getRoleScopeTagsByResource
.Description
Invoke function getRoleScopeTagsByResource
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphRoleScopeTag
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementrolescopetagbyresource
#>

function Get-MgDeviceManagementRoleScopeTagByResource {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphRoleScopeTag])]
[CmdletBinding(DefaultParameterSetName='Get1', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get1', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: resource={resource}
    ${Resource},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get1 = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementRoleScopeTagByResource_Get1';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementRoleScopeTagByResource_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getFileVaultKey
.Description
Invoke function getFileVaultKey
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementscriptdevicerunstatemanageddevicefilevaultkey
#>

function Get-MgDeviceManagementScriptDeviceRunStateManagedDeviceFileVaultKey {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptDeviceState
    ${DeviceManagementScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScript
    ${DeviceManagementScriptId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementScriptDeviceRunStateManagedDeviceFileVaultKey_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementScriptDeviceRunStateManagedDeviceFileVaultKey_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getNonCompliantSettings
.Description
Invoke function getNonCompliantSettings
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementscriptdevicerunstatemanageddevicenoncompliantsetting
#>

function Get-MgDeviceManagementScriptDeviceRunStateManagedDeviceNonCompliantSetting {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptDeviceState
    ${DeviceManagementScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScript
    ${DeviceManagementScriptId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementScriptDeviceRunStateManagedDeviceNonCompliantSetting_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementScriptDeviceRunStateManagedDeviceNonCompliantSetting_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getFileVaultKey
.Description
Invoke function getFileVaultKey
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.String
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementscriptuserrunstatedevicerunstatemanageddevicefilevaultkey
#>

function Get-MgDeviceManagementScriptUserRunStateDeviceRunStateManagedDeviceFileVaultKey {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptDeviceState
    ${DeviceManagementScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScript
    ${DeviceManagementScriptId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptUserState
    ${DeviceManagementScriptUserStateId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementScriptUserRunStateDeviceRunStateManagedDeviceFileVaultKey_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementScriptUserRunStateDeviceRunStateManagedDeviceFileVaultKey_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getNonCompliantSettings
.Description
Invoke function getNonCompliantSettings
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementscriptuserrunstatedevicerunstatemanageddevicenoncompliantsetting
#>

function Get-MgDeviceManagementScriptUserRunStateDeviceRunStateManagedDeviceNonCompliantSetting {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphDeviceCompliancePolicySettingState])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptDeviceState
    ${DeviceManagementScriptDeviceStateId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScript
    ${DeviceManagementScriptId},

    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceManagementScriptUserState
    ${DeviceManagementScriptUserStateId},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementScriptUserRunStateDeviceRunStateManagedDeviceNonCompliantSetting_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementScriptUserRunStateDeviceRunStateManagedDeviceNonCompliantSetting_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getSuggestedEnrollmentLimit
.Description
Invoke function getSuggestedEnrollmentLimit
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.Int32
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementsuggestedenrollmentlimit
#>

function Get-MgDeviceManagementSuggestedEnrollmentLimit {
[OutputType([System.Int32])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Get', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: enrollmentType={enrollmentType}
    ${EnrollmentType},

    [Parameter(ParameterSetName='GetViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementSuggestedEnrollmentLimit_Get';
            GetViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementSuggestedEnrollmentLimit_GetViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getSourceImages
.Description
Invoke function getSourceImages
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphCloudPcSourceDeviceImage
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementvirtualendpointdeviceimagesourceimage
#>

function Get-MgDeviceManagementVirtualEndpointDeviceImageSourceImage {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphCloudPcSourceDeviceImage])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementVirtualEndpointDeviceImageSourceImage_Get';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function getEffectivePermissions
.Description
Invoke function getEffectivePermissions
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Outputs
System.String
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/get-mgdevicemanagementvirtualendpointeffectivepermission
#>

function Get-MgDeviceManagementVirtualEndpointEffectivePermission {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Get', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Get = 'Microsoft.Graph.DeviceManagement.Functions.private\Get-MgDeviceManagementVirtualEndpointEffectivePermission_Get';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function hasCustomRoleScopeTag
.Description
Invoke function hasCustomRoleScopeTag
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/invoke-mgcustomdevicemanagementroleassignmentrolescopetag
#>

function Invoke-MgCustomDeviceManagementRoleAssignmentRoleScopeTag {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Custom', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Custom', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # key: id of deviceAndAppManagementRoleAssignment
    ${DeviceAndAppManagementRoleAssignmentId},

    [Parameter(ParameterSetName='CustomViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Custom = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgCustomDeviceManagementRoleAssignmentRoleScopeTag_Custom';
            CustomViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgCustomDeviceManagementRoleAssignmentRoleScopeTag_CustomViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function hasCustomRoleScopeTag
.Description
Invoke function hasCustomRoleScopeTag
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Outputs
System.Boolean
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/invoke-mgcustomdevicemanagementrolescopetag
#>

function Invoke-MgCustomDeviceManagementRoleScopeTag {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Custom', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Custom = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgCustomDeviceManagementRoleScopeTag_Custom';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function downloadApplePushNotificationCertificateSigningRequest
.Description
Invoke function downloadApplePushNotificationCertificateSigningRequest
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Outputs
System.String
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/invoke-mgdownloaddevicemanagementapplepushnotificationcertificateapplepushnotificationcertificatesigningrequest
#>

function Invoke-MgDownloadDeviceManagementApplePushNotificationCertificateApplePushNotificationCertificateSigningRequest {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Download', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Download = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgDownloadDeviceManagementApplePushNotificationCertificateApplePushNotificationCertificateSigningRequest_Download';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function areGlobalScriptsAvailable
.Description
Invoke function areGlobalScriptsAvailable
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Outputs
System.String
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/invoke-mgisdevicemanagementdevicehealthscriptglobalscriptavailable
#>

function Invoke-MgIsDeviceManagementDeviceHealthScriptGlobalScriptAvailable {
[OutputType([System.String])]
[CmdletBinding(DefaultParameterSetName='Are', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Are = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgIsDeviceManagementDeviceHealthScriptGlobalScriptAvailable_Are';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function scopedForResource
.Description
Invoke function scopedForResource
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/invoke-mgscopeddevicemanagement
#>

function Invoke-MgScopedDeviceManagement {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Scoped', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Scoped', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: resource={resource}
    ${Resource},

    [Parameter(ParameterSetName='ScopedViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Scoped = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgScopedDeviceManagement_Scoped';
            ScopedViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgScopedDeviceManagement_ScopedViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function summarizeDevicePerformanceDevices
.Description
Invoke function summarizeDevicePerformanceDevices
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphUserExperienceAnalyticsDevicePerformance
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/invoke-mgsummarizedevicemanagementuserexperienceanalyticdeviceperformancedevice
#>

function Invoke-MgSummarizeDeviceManagementUserExperienceAnalyticDevicePerformanceDevice {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphUserExperienceAnalyticsDevicePerformance])]
[CmdletBinding(DefaultParameterSetName='Summarize', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Summarize', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: summarizeBy={summarizeBy}
    ${SummarizeBy},

    [Parameter(ParameterSetName='SummarizeViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Summarize = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgSummarizeDeviceManagementUserExperienceAnalyticDevicePerformanceDevice_Summarize';
            SummarizeViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgSummarizeDeviceManagementUserExperienceAnalyticDevicePerformanceDevice_SummarizeViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function summarizeDeviceRegressionPerformance
.Description
Invoke function summarizeDeviceRegressionPerformance
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphUserExperienceAnalyticsRegressionSummary
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/invoke-mgsummarizedevicemanagementuserexperienceanalyticregressionsummarydeviceregressionperformance
#>

function Invoke-MgSummarizeDeviceManagementUserExperienceAnalyticRegressionSummaryDeviceRegressionPerformance {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphUserExperienceAnalyticsRegressionSummary])]
[CmdletBinding(DefaultParameterSetName='Summarize', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Summarize', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: summarizeBy={summarizeBy}
    ${SummarizeBy},

    [Parameter(ParameterSetName='SummarizeViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Summarize = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgSummarizeDeviceManagementUserExperienceAnalyticRegressionSummaryDeviceRegressionPerformance_Summarize';
            SummarizeViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgSummarizeDeviceManagementUserExperienceAnalyticRegressionSummaryDeviceRegressionPerformance_SummarizeViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function summarizeDeviceRemoteConnection
.Description
Invoke function summarizeDeviceRemoteConnection
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphUserExperienceAnalyticsRemoteConnection
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/invoke-mgsummarizedevicemanagementuserexperienceanalyticremoteconnectiondeviceremoteconnection
#>

function Invoke-MgSummarizeDeviceManagementUserExperienceAnalyticRemoteConnectionDeviceRemoteConnection {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphUserExperienceAnalyticsRemoteConnection])]
[CmdletBinding(DefaultParameterSetName='Summarize', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Summarize', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: summarizeBy={summarizeBy}
    ${SummarizeBy},

    [Parameter(ParameterSetName='SummarizeViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Summarize = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgSummarizeDeviceManagementUserExperienceAnalyticRemoteConnectionDeviceRemoteConnection_Summarize';
            SummarizeViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgSummarizeDeviceManagementUserExperienceAnalyticRemoteConnectionDeviceRemoteConnection_SummarizeViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function summarizeDeviceResourcePerformance
.Description
Invoke function summarizeDeviceResourcePerformance
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
Microsoft.Graph.PowerShell.Models.IMicrosoftGraphUserExperienceAnalyticsResourcePerformance
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/invoke-mgsummarizedevicemanagementuserexperienceanalyticresourceperformancedeviceresourceperformance
#>

function Invoke-MgSummarizeDeviceManagementUserExperienceAnalyticResourcePerformanceDeviceResourcePerformance {
[OutputType([Microsoft.Graph.PowerShell.Models.IMicrosoftGraphUserExperienceAnalyticsResourcePerformance])]
[CmdletBinding(DefaultParameterSetName='Summarize', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Summarize', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: summarizeBy={summarizeBy}
    ${SummarizeBy},

    [Parameter(ParameterSetName='SummarizeViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Summarize = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgSummarizeDeviceManagementUserExperienceAnalyticResourcePerformanceDeviceResourcePerformance_Summarize';
            SummarizeViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Invoke-MgSummarizeDeviceManagementUserExperienceAnalyticResourcePerformanceDeviceResourcePerformance_SummarizeViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# ----------------------------------------------------------------------------------
#
# Copyright Microsoft Corporation
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# http://www.apache.org/licenses/LICENSE-2.0
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# ----------------------------------------------------------------------------------

<#
.Synopsis
Invoke function verifyWindowsEnrollmentAutoDiscovery
.Description
Invoke function verifyWindowsEnrollmentAutoDiscovery
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
.Example
PS C:\> {{ Add code here }}
 
{{ Add output here }}
 
.Inputs
Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity
.Outputs
System.Boolean
.Notes
COMPLEX PARAMETER PROPERTIES
 
To create the parameters described below, construct a hash table containing the appropriate properties. For information on hash tables, run Get-Help about_Hash_Tables.
 
INPUTOBJECT <IDeviceManagementFunctionsIdentity>: Identity Parameter
  [Category <String>]: Usage: category={category}
  [DepOnboardingSettingId <String>]: key: id of depOnboardingSetting
  [DeviceAndAppManagementRoleAssignmentId <String>]: key: id of deviceAndAppManagementRoleAssignment
  [DeviceComplianceScriptDeviceStateId <String>]: key: id of deviceComplianceScriptDeviceState
  [DeviceComplianceScriptId <String>]: key: id of deviceComplianceScript
  [DeviceCustomAttributeShellScriptId <String>]: key: id of deviceCustomAttributeShellScript
  [DeviceHealthScriptDeviceStateId <String>]: key: id of deviceHealthScriptDeviceState
  [DeviceHealthScriptId <String>]: key: id of deviceHealthScript
  [DeviceManagementIntentId <String>]: key: id of deviceManagementIntent
  [DeviceManagementScriptDeviceStateId <String>]: key: id of deviceManagementScriptDeviceState
  [DeviceManagementScriptId <String>]: key: id of deviceManagementScript
  [DeviceManagementScriptUserStateId <String>]: key: id of deviceManagementScriptUserState
  [DeviceManagementTemplateId <String>]: key: id of deviceManagementTemplate
  [DeviceManagementTemplateId1 <String>]: key: id of deviceManagementTemplate
  [DeviceShellScriptId <String>]: key: id of deviceShellScript
  [DomainName <String>]: Usage: domainName={domainName}
  [EnrollmentProfileId <String>]: key: id of enrollmentProfile
  [EnrollmentType <String>]: Usage: enrollmentType={enrollmentType}
  [ExpiringBeforeDateTime <String>]: Usage: expiringBeforeDateTime={expiringBeforeDateTime}
  [ManagedDeviceId <String>]: key: id of managedDevice
  [ManagementConditionId <String>]: key: id of managementCondition
  [ManagementConditionStatementId <String>]: key: id of managementConditionStatement
  [Platform <String>]: Usage: platform={platform}
  [PolicyId <String>]: Usage: policyId={policyId}
  [Resource <String>]: Usage: resource={resource}
  [ResourceOperationId <String>]: key: id of resourceOperation
  [Scope <String>]: Usage: scope={scope}
  [SummarizeBy <String>]: Usage: summarizeBy={summarizeBy}
  [TemplateId <String>]: Usage: templateId={templateId}
  [Userid <String>]: Usage: userid={userid}
.Link
https://docs.microsoft.com/en-us/powershell/module/microsoft.graph.devicemanagement.functions/test-mgdevicemanagementwindowenrollmentautodiscovery
#>

function Test-MgDeviceManagementWindowEnrollmentAutoDiscovery {
[OutputType([System.Boolean])]
[CmdletBinding(DefaultParameterSetName='Verify', PositionalBinding=$false)]
[Microsoft.Graph.PowerShell.Profile('v1.0-beta')]
param(
    [Parameter(ParameterSetName='Verify', Mandatory)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [System.String]
    # Usage: domainName={domainName}
    ${DomainName},

    [Parameter(ParameterSetName='VerifyViaIdentity', Mandatory, ValueFromPipeline)]
    [Microsoft.Graph.PowerShell.Category('Path')]
    [Microsoft.Graph.PowerShell.Models.IDeviceManagementFunctionsIdentity]
    # Identity Parameter
    # To construct, see NOTES section for INPUTOBJECT properties and create a hash table.
    ${InputObject},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Wait for .NET debugger to attach
    ${Break},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be appended to the front of the pipeline
    ${HttpPipelineAppend},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [Microsoft.Graph.PowerShell.Runtime.SendAsyncStep[]]
    # SendAsync Pipeline Steps to be prepended to the front of the pipeline
    ${HttpPipelinePrepend},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Uri]
    # The URI for the proxy server to use
    ${Proxy},

    [Parameter(DontShow)]
    [ValidateNotNull()]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.PSCredential]
    # Credentials for a proxy server to use for the remote call
    ${ProxyCredential},

    [Parameter(DontShow)]
    [Microsoft.Graph.PowerShell.Category('Runtime')]
    [System.Management.Automation.SwitchParameter]
    # Use the default credentials for the proxy
    ${ProxyUseDefaultCredentials}
)

begin {
    try {
        $outBuffer = $null
        if ($PSBoundParameters.TryGetValue('OutBuffer', [ref]$outBuffer)) {
            $PSBoundParameters['OutBuffer'] = 1
        }
        $parameterSet = $PSCmdlet.ParameterSetName
        $mapping = @{
            Verify = 'Microsoft.Graph.DeviceManagement.Functions.private\Test-MgDeviceManagementWindowEnrollmentAutoDiscovery_Verify';
            VerifyViaIdentity = 'Microsoft.Graph.DeviceManagement.Functions.private\Test-MgDeviceManagementWindowEnrollmentAutoDiscovery_VerifyViaIdentity';
        }
        $wrappedCmd = $ExecutionContext.InvokeCommand.GetCommand(($mapping[$parameterSet]), [System.Management.Automation.CommandTypes]::Cmdlet)
        $scriptCmd = {& $wrappedCmd @PSBoundParameters}
        $steppablePipeline = $scriptCmd.GetSteppablePipeline($MyInvocation.CommandOrigin)
        $steppablePipeline.Begin($PSCmdlet)
    } catch {
        throw
    }
}

process {
    try {
        $steppablePipeline.Process($_)
    } catch {
        throw
    }
}

end {
    try {
        $steppablePipeline.End()
    } catch {
        throw
    }
}
}

# SIG # Begin signature block
# MIIjnwYJKoZIhvcNAQcCoIIjkDCCI4wCAQExDzANBglghkgBZQMEAgEFADB5Bgor
# BgEEAYI3AgEEoGswaTA0BgorBgEEAYI3AgEeMCYCAwEAAAQQH8w7YFlLCE63JNLG
# KX7zUQIBAAIBAAIBAAIBAAIBADAxMA0GCWCGSAFlAwQCAQUABCAR6TFoJaoQaY9K
# z5oMCkuLDC7R9n/qPbvO5FBuWbiYgKCCDYEwggX/MIID56ADAgECAhMzAAAB32vw
# LpKnSrTQAAAAAAHfMA0GCSqGSIb3DQEBCwUAMH4xCzAJBgNVBAYTAlVTMRMwEQYD
# VQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVNaWNy
# b3NvZnQgQ29ycG9yYXRpb24xKDAmBgNVBAMTH01pY3Jvc29mdCBDb2RlIFNpZ25p
# bmcgUENBIDIwMTEwHhcNMjAxMjE1MjEzMTQ1WhcNMjExMjAyMjEzMTQ1WjB0MQsw
# CQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9u
# ZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMR4wHAYDVQQDExVNaWNy
# b3NvZnQgQ29ycG9yYXRpb24wggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIB
# AQC2uxlZEACjqfHkuFyoCwfL25ofI9DZWKt4wEj3JBQ48GPt1UsDv834CcoUUPMn
# s/6CtPoaQ4Thy/kbOOg/zJAnrJeiMQqRe2Lsdb/NSI2gXXX9lad1/yPUDOXo4GNw
# PjXq1JZi+HZV91bUr6ZjzePj1g+bepsqd/HC1XScj0fT3aAxLRykJSzExEBmU9eS
# yuOwUuq+CriudQtWGMdJU650v/KmzfM46Y6lo/MCnnpvz3zEL7PMdUdwqj/nYhGG
# 3UVILxX7tAdMbz7LN+6WOIpT1A41rwaoOVnv+8Ua94HwhjZmu1S73yeV7RZZNxoh
# EegJi9YYssXa7UZUUkCCA+KnAgMBAAGjggF+MIIBejAfBgNVHSUEGDAWBgorBgEE
# AYI3TAgBBggrBgEFBQcDAzAdBgNVHQ4EFgQUOPbML8IdkNGtCfMmVPtvI6VZ8+Mw
# UAYDVR0RBEkwR6RFMEMxKTAnBgNVBAsTIE1pY3Jvc29mdCBPcGVyYXRpb25zIFB1
# ZXJ0byBSaWNvMRYwFAYDVQQFEw0yMzAwMTIrNDYzMDA5MB8GA1UdIwQYMBaAFEhu
# ZOVQBdOCqhc3NyK1bajKdQKVMFQGA1UdHwRNMEswSaBHoEWGQ2h0dHA6Ly93d3cu
# bWljcm9zb2Z0LmNvbS9wa2lvcHMvY3JsL01pY0NvZFNpZ1BDQTIwMTFfMjAxMS0w
# Ny0wOC5jcmwwYQYIKwYBBQUHAQEEVTBTMFEGCCsGAQUFBzAChkVodHRwOi8vd3d3
# Lm1pY3Jvc29mdC5jb20vcGtpb3BzL2NlcnRzL01pY0NvZFNpZ1BDQTIwMTFfMjAx
# MS0wNy0wOC5jcnQwDAYDVR0TAQH/BAIwADANBgkqhkiG9w0BAQsFAAOCAgEAnnqH
# tDyYUFaVAkvAK0eqq6nhoL95SZQu3RnpZ7tdQ89QR3++7A+4hrr7V4xxmkB5BObS
# 0YK+MALE02atjwWgPdpYQ68WdLGroJZHkbZdgERG+7tETFl3aKF4KpoSaGOskZXp
# TPnCaMo2PXoAMVMGpsQEQswimZq3IQ3nRQfBlJ0PoMMcN/+Pks8ZTL1BoPYsJpok
# t6cql59q6CypZYIwgyJ892HpttybHKg1ZtQLUlSXccRMlugPgEcNZJagPEgPYni4
# b11snjRAgf0dyQ0zI9aLXqTxWUU5pCIFiPT0b2wsxzRqCtyGqpkGM8P9GazO8eao
# mVItCYBcJSByBx/pS0cSYwBBHAZxJODUqxSXoSGDvmTfqUJXntnWkL4okok1FiCD
# Z4jpyXOQunb6egIXvkgQ7jb2uO26Ow0m8RwleDvhOMrnHsupiOPbozKroSa6paFt
# VSh89abUSooR8QdZciemmoFhcWkEwFg4spzvYNP4nIs193261WyTaRMZoceGun7G
# CT2Rl653uUj+F+g94c63AhzSq4khdL4HlFIP2ePv29smfUnHtGq6yYFDLnT0q/Y+
# Di3jwloF8EWkkHRtSuXlFUbTmwr/lDDgbpZiKhLS7CBTDj32I0L5i532+uHczw82
# oZDmYmYmIUSMbZOgS65h797rj5JJ6OkeEUJoAVwwggd6MIIFYqADAgECAgphDpDS
# AAAAAAADMA0GCSqGSIb3DQEBCwUAMIGIMQswCQYDVQQGEwJVUzETMBEGA1UECBMK
# V2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0
# IENvcnBvcmF0aW9uMTIwMAYDVQQDEylNaWNyb3NvZnQgUm9vdCBDZXJ0aWZpY2F0
# ZSBBdXRob3JpdHkgMjAxMTAeFw0xMTA3MDgyMDU5MDlaFw0yNjA3MDgyMTA5MDla
# MH4xCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdS
# ZWRtb25kMR4wHAYDVQQKExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xKDAmBgNVBAMT
# H01pY3Jvc29mdCBDb2RlIFNpZ25pbmcgUENBIDIwMTEwggIiMA0GCSqGSIb3DQEB
# AQUAA4ICDwAwggIKAoICAQCr8PpyEBwurdhuqoIQTTS68rZYIZ9CGypr6VpQqrgG
# OBoESbp/wwwe3TdrxhLYC/A4wpkGsMg51QEUMULTiQ15ZId+lGAkbK+eSZzpaF7S
# 35tTsgosw6/ZqSuuegmv15ZZymAaBelmdugyUiYSL+erCFDPs0S3XdjELgN1q2jz
# y23zOlyhFvRGuuA4ZKxuZDV4pqBjDy3TQJP4494HDdVceaVJKecNvqATd76UPe/7
# 4ytaEB9NViiienLgEjq3SV7Y7e1DkYPZe7J7hhvZPrGMXeiJT4Qa8qEvWeSQOy2u
# M1jFtz7+MtOzAz2xsq+SOH7SnYAs9U5WkSE1JcM5bmR/U7qcD60ZI4TL9LoDho33
# X/DQUr+MlIe8wCF0JV8YKLbMJyg4JZg5SjbPfLGSrhwjp6lm7GEfauEoSZ1fiOIl
# XdMhSz5SxLVXPyQD8NF6Wy/VI+NwXQ9RRnez+ADhvKwCgl/bwBWzvRvUVUvnOaEP
# 6SNJvBi4RHxF5MHDcnrgcuck379GmcXvwhxX24ON7E1JMKerjt/sW5+v/N2wZuLB
# l4F77dbtS+dJKacTKKanfWeA5opieF+yL4TXV5xcv3coKPHtbcMojyyPQDdPweGF
# RInECUzF1KVDL3SV9274eCBYLBNdYJWaPk8zhNqwiBfenk70lrC8RqBsmNLg1oiM
# CwIDAQABo4IB7TCCAekwEAYJKwYBBAGCNxUBBAMCAQAwHQYDVR0OBBYEFEhuZOVQ
# BdOCqhc3NyK1bajKdQKVMBkGCSsGAQQBgjcUAgQMHgoAUwB1AGIAQwBBMAsGA1Ud
# DwQEAwIBhjAPBgNVHRMBAf8EBTADAQH/MB8GA1UdIwQYMBaAFHItOgIxkEO5FAVO
# 4eqnxzHRI4k0MFoGA1UdHwRTMFEwT6BNoEuGSWh0dHA6Ly9jcmwubWljcm9zb2Z0
# LmNvbS9wa2kvY3JsL3Byb2R1Y3RzL01pY1Jvb0NlckF1dDIwMTFfMjAxMV8wM18y
# Mi5jcmwwXgYIKwYBBQUHAQEEUjBQME4GCCsGAQUFBzAChkJodHRwOi8vd3d3Lm1p
# Y3Jvc29mdC5jb20vcGtpL2NlcnRzL01pY1Jvb0NlckF1dDIwMTFfMjAxMV8wM18y
# Mi5jcnQwgZ8GA1UdIASBlzCBlDCBkQYJKwYBBAGCNy4DMIGDMD8GCCsGAQUFBwIB
# FjNodHRwOi8vd3d3Lm1pY3Jvc29mdC5jb20vcGtpb3BzL2RvY3MvcHJpbWFyeWNw
# cy5odG0wQAYIKwYBBQUHAgIwNB4yIB0ATABlAGcAYQBsAF8AcABvAGwAaQBjAHkA
# XwBzAHQAYQB0AGUAbQBlAG4AdAAuIB0wDQYJKoZIhvcNAQELBQADggIBAGfyhqWY
# 4FR5Gi7T2HRnIpsLlhHhY5KZQpZ90nkMkMFlXy4sPvjDctFtg/6+P+gKyju/R6mj
# 82nbY78iNaWXXWWEkH2LRlBV2AySfNIaSxzzPEKLUtCw/WvjPgcuKZvmPRul1LUd
# d5Q54ulkyUQ9eHoj8xN9ppB0g430yyYCRirCihC7pKkFDJvtaPpoLpWgKj8qa1hJ
# Yx8JaW5amJbkg/TAj/NGK978O9C9Ne9uJa7lryft0N3zDq+ZKJeYTQ49C/IIidYf
# wzIY4vDFLc5bnrRJOQrGCsLGra7lstnbFYhRRVg4MnEnGn+x9Cf43iw6IGmYslmJ
# aG5vp7d0w0AFBqYBKig+gj8TTWYLwLNN9eGPfxxvFX1Fp3blQCplo8NdUmKGwx1j
# NpeG39rz+PIWoZon4c2ll9DuXWNB41sHnIc+BncG0QaxdR8UvmFhtfDcxhsEvt9B
# xw4o7t5lL+yX9qFcltgA1qFGvVnzl6UJS0gQmYAf0AApxbGbpT9Fdx41xtKiop96
# eiL6SJUfq/tHI4D1nvi/a7dLl+LrdXga7Oo3mXkYS//WsyNodeav+vyL6wuA6mk7
# r/ww7QRMjt/fdW1jkT3RnVZOT7+AVyKheBEyIXrvQQqxP/uozKRdwaGIm1dxVk5I
# RcBCyZt2WwqASGv9eZ/BvW1taslScxMNelDNMYIVdDCCFXACAQEwgZUwfjELMAkG
# A1UEBhMCVVMxEzARBgNVBAgTCldhc2hpbmd0b24xEDAOBgNVBAcTB1JlZG1vbmQx
# HjAcBgNVBAoTFU1pY3Jvc29mdCBDb3Jwb3JhdGlvbjEoMCYGA1UEAxMfTWljcm9z
# b2Z0IENvZGUgU2lnbmluZyBQQ0EgMjAxMQITMwAAAd9r8C6Sp0q00AAAAAAB3zAN
# BglghkgBZQMEAgEFAKCBrjAZBgkqhkiG9w0BCQMxDAYKKwYBBAGCNwIBBDAcBgor
# BgEEAYI3AgELMQ4wDAYKKwYBBAGCNwIBFTAvBgkqhkiG9w0BCQQxIgQgEk0eJMEL
# IOF7i0Sy5EvfTMMg37yGsbSilkiTzDv67DwwQgYKKwYBBAGCNwIBDDE0MDKgFIAS
# AE0AaQBjAHIAbwBzAG8AZgB0oRqAGGh0dHA6Ly93d3cubWljcm9zb2Z0LmNvbTAN
# BgkqhkiG9w0BAQEFAASCAQByHaIWytd5fc8EaOfK+uXBa2Q9eT+2TTaJa6YYx/Ax
# Pn7P37dLxuxiB9tD+knxGunSziMEf39fcC8cms5a2NWIeg+qWlQFXfdtbQWEVIhG
# SUyxqNav8L/6ltktn7N5GDLay7BOQLQex4y5mOOSF5TXKtZA8/e/yq1LGrG2qoPS
# JLMmwJQtWFswPjOHcGT7mGLO/ctd4kl0yreQVoKpd9XmV+sLpIQ39ffjOBMT1L4E
# uLs+71y7y0h6NVsW/gyWuFh7ZriaNTzIKEqa+FxvEs54pUiBH1H8DMdDVOK0dogE
# zLAJYkkjZ/Ix1VhI6VBh/hK8ceN65aSjvipK95973iVioYIS/jCCEvoGCisGAQQB
# gjcDAwExghLqMIIS5gYJKoZIhvcNAQcCoIIS1zCCEtMCAQMxDzANBglghkgBZQME
# AgEFADCCAVkGCyqGSIb3DQEJEAEEoIIBSASCAUQwggFAAgEBBgorBgEEAYRZCgMB
# MDEwDQYJYIZIAWUDBAIBBQAEII+UXusZ51+P9Qu+L0OYZ4cU1MBx5++8CERU9W9v
# sjOPAgZgPOAmaeQYEzIwMjEwMzEyMTI0NjQ4LjY4MlowBIACAfSggdikgdUwgdIx
# CzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRt
# b25kMR4wHAYDVQQKExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xLTArBgNVBAsTJE1p
# Y3Jvc29mdCBJcmVsYW5kIE9wZXJhdGlvbnMgTGltaXRlZDEmMCQGA1UECxMdVGhh
# bGVzIFRTUyBFU046RTA0MS00QkVFLUZBN0UxJTAjBgNVBAMTHE1pY3Jvc29mdCBU
# aW1lLVN0YW1wIFNlcnZpY2Wggg5NMIIE+TCCA+GgAwIBAgITMwAAATdBj0PnWltv
# pwAAAAABNzANBgkqhkiG9w0BAQsFADB8MQswCQYDVQQGEwJVUzETMBEGA1UECBMK
# V2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9zb2Z0
# IENvcnBvcmF0aW9uMSYwJAYDVQQDEx1NaWNyb3NvZnQgVGltZS1TdGFtcCBQQ0Eg
# MjAxMDAeFw0yMDEwMTUxNzI4MTRaFw0yMjAxMTIxNzI4MTRaMIHSMQswCQYDVQQG
# EwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwG
# A1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMS0wKwYDVQQLEyRNaWNyb3NvZnQg
# SXJlbGFuZCBPcGVyYXRpb25zIExpbWl0ZWQxJjAkBgNVBAsTHVRoYWxlcyBUU1Mg
# RVNOOkUwNDEtNEJFRS1GQTdFMSUwIwYDVQQDExxNaWNyb3NvZnQgVGltZS1TdGFt
# cCBTZXJ2aWNlMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAxBHuadEl
# m3G5tikhTzjSDB0+9sXmUhUyDVRj0Y4vz9rZ9sykNobL5/6At5zOkeB2bl9IXvVd
# yS/ZJNZT373knzrQ347z30Mmw7++VU/CE+4x4w9kb5bqQHfSzbJQt6KmWsuMmJLz
# g4R5MeJs5MY5YdPLxoMoDRcTi//KoMFR0KzS1/324D2/4KkHD1Xt+s0xY0DICUOK
# 1RbmJCKEgBP1/GDZjuZQBS9Di89yTnvLJV+Lr1QtriH4EqmRoAdmV3zJ0GJsr5vh
# GPmKfOPCRSk7Q8igX7goFnCLzpYcfHGCqoR/mw95gfQpwymVwxZB0PkGMrQw+LKV
# Pa/FHP4C4KO+QQIDAQABo4IBGzCCARcwHQYDVR0OBBYEFA1gsHMM+udgY7rEne66
# OyzxlE9lMB8GA1UdIwQYMBaAFNVjOlyKMZDzQ3t8RhvFM2hahW1VMFYGA1UdHwRP
# ME0wS6BJoEeGRWh0dHA6Ly9jcmwubWljcm9zb2Z0LmNvbS9wa2kvY3JsL3Byb2R1
# Y3RzL01pY1RpbVN0YVBDQV8yMDEwLTA3LTAxLmNybDBaBggrBgEFBQcBAQROMEww
# SgYIKwYBBQUHMAKGPmh0dHA6Ly93d3cubWljcm9zb2Z0LmNvbS9wa2kvY2VydHMv
# TWljVGltU3RhUENBXzIwMTAtMDctMDEuY3J0MAwGA1UdEwEB/wQCMAAwEwYDVR0l
# BAwwCgYIKwYBBQUHAwgwDQYJKoZIhvcNAQELBQADggEBAJ32U9d90RVuAUb9NsnX
# BG1K42qjhU+jHvwBdbipIcX4Wg7dH5ZduQZj3gWgKADZ5z+TehX7GnBbi265VI7x
# DRsFe2CjkTm4JIoisdKwYBDruS+YRRBG4B1ERuWi54XGwx+lSA+iQNrIi6Jm0CL/
# MfQLvwsqPJSGP69OEHCyaExos486+X3JTuGV11CBl/BO7r8UHbx/rE6fZrlZZYab
# IF6aeahvTL14LvZLV/bMzYSODsbjHHsTm9QaGm1ijhagCdbkAqr8+7HAgYEar8XP
# lzxUhVI4ShVB5ZGd9gZ2yBkwxdA0oFc745TdOPrbP79vd0ePqgvJDH5tkOhTRNI5
# 5XQwggZxMIIEWaADAgECAgphCYEqAAAAAAACMA0GCSqGSIb3DQEBCwUAMIGIMQsw
# CQYDVQQGEwJVUzETMBEGA1UECBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9u
# ZDEeMBwGA1UEChMVTWljcm9zb2Z0IENvcnBvcmF0aW9uMTIwMAYDVQQDEylNaWNy
# b3NvZnQgUm9vdCBDZXJ0aWZpY2F0ZSBBdXRob3JpdHkgMjAxMDAeFw0xMDA3MDEy
# MTM2NTVaFw0yNTA3MDEyMTQ2NTVaMHwxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpX
# YXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRtb25kMR4wHAYDVQQKExVNaWNyb3NvZnQg
# Q29ycG9yYXRpb24xJjAkBgNVBAMTHU1pY3Jvc29mdCBUaW1lLVN0YW1wIFBDQSAy
# MDEwMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAqR0NvHcRijog7PwT
# l/X6f2mUa3RUENWlCgCChfvtfGhLLF/Fw+Vhwna3PmYrW/AVUycEMR9BGxqVHc4J
# E458YTBZsTBED/FgiIRUQwzXTbg4CLNC3ZOs1nMwVyaCo0UN0Or1R4HNvyRgMlhg
# RvJYR4YyhB50YWeRX4FUsc+TTJLBxKZd0WETbijGGvmGgLvfYfxGwScdJGcSchoh
# iq9LZIlQYrFd/XcfPfBXday9ikJNQFHRD5wGPmd/9WbAA5ZEfu/QS/1u5ZrKsajy
# eioKMfDaTgaRtogINeh4HLDpmc085y9Euqf03GS9pAHBIAmTeM38vMDJRF1eFpwB
# BU8iTQIDAQABo4IB5jCCAeIwEAYJKwYBBAGCNxUBBAMCAQAwHQYDVR0OBBYEFNVj
# OlyKMZDzQ3t8RhvFM2hahW1VMBkGCSsGAQQBgjcUAgQMHgoAUwB1AGIAQwBBMAsG
# A1UdDwQEAwIBhjAPBgNVHRMBAf8EBTADAQH/MB8GA1UdIwQYMBaAFNX2VsuP6KJc
# YmjRPZSQW9fOmhjEMFYGA1UdHwRPME0wS6BJoEeGRWh0dHA6Ly9jcmwubWljcm9z
# b2Z0LmNvbS9wa2kvY3JsL3Byb2R1Y3RzL01pY1Jvb0NlckF1dF8yMDEwLTA2LTIz
# LmNybDBaBggrBgEFBQcBAQROMEwwSgYIKwYBBQUHMAKGPmh0dHA6Ly93d3cubWlj
# cm9zb2Z0LmNvbS9wa2kvY2VydHMvTWljUm9vQ2VyQXV0XzIwMTAtMDYtMjMuY3J0
# MIGgBgNVHSABAf8EgZUwgZIwgY8GCSsGAQQBgjcuAzCBgTA9BggrBgEFBQcCARYx
# aHR0cDovL3d3dy5taWNyb3NvZnQuY29tL1BLSS9kb2NzL0NQUy9kZWZhdWx0Lmh0
# bTBABggrBgEFBQcCAjA0HjIgHQBMAGUAZwBhAGwAXwBQAG8AbABpAGMAeQBfAFMA
# dABhAHQAZQBtAGUAbgB0AC4gHTANBgkqhkiG9w0BAQsFAAOCAgEAB+aIUQ3ixuCY
# P4FxAz2do6Ehb7Prpsz1Mb7PBeKp/vpXbRkws8LFZslq3/Xn8Hi9x6ieJeP5vO1r
# VFcIK1GCRBL7uVOMzPRgEop2zEBAQZvcXBf/XPleFzWYJFZLdO9CEMivv3/Gf/I3
# fVo/HPKZeUqRUgCvOA8X9S95gWXZqbVr5MfO9sp6AG9LMEQkIjzP7QOllo9ZKby2
# /QThcJ8ySif9Va8v/rbljjO7Yl+a21dA6fHOmWaQjP9qYn/dxUoLkSbiOewZSnFj
# nXshbcOco6I8+n99lmqQeKZt0uGc+R38ONiU9MalCpaGpL2eGq4EQoO4tYCbIjgg
# tSXlZOz39L9+Y1klD3ouOVd2onGqBooPiRa6YacRy5rYDkeagMXQzafQ732D8OE7
# cQnfXXSYIghh2rBQHm+98eEA3+cxB6STOvdlR3jo+KhIq/fecn5ha293qYHLpwms
# ObvsxsvYgrRyzR30uIUBHoD7G4kqVDmyW9rIDVWZeodzOwjmmC3qjeAzLhIp9cAv
# VCch98isTtoouLGp25ayp0Kiyc8ZQU3ghvkqmqMRZjDTu3QyS99je/WZii8bxyGv
# WbWu3EQ8l1Bx16HSxVXjad5XwdHeMMD9zOZN+w2/XU/pnR4ZOC+8z1gFLu8NoFA1
# 2u8JJxzVs341Hgi62jbb01+P3nSISRKhggLXMIICQAIBATCCAQChgdikgdUwgdIx
# CzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdSZWRt
# b25kMR4wHAYDVQQKExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xLTArBgNVBAsTJE1p
# Y3Jvc29mdCBJcmVsYW5kIE9wZXJhdGlvbnMgTGltaXRlZDEmMCQGA1UECxMdVGhh
# bGVzIFRTUyBFU046RTA0MS00QkVFLUZBN0UxJTAjBgNVBAMTHE1pY3Jvc29mdCBU
# aW1lLVN0YW1wIFNlcnZpY2WiIwoBATAHBgUrDgMCGgMVAOq7qDk4iVz8ITuZbUFr
# AG7ecxqcoIGDMIGApH4wfDELMAkGA1UEBhMCVVMxEzARBgNVBAgTCldhc2hpbmd0
# b24xEDAOBgNVBAcTB1JlZG1vbmQxHjAcBgNVBAoTFU1pY3Jvc29mdCBDb3Jwb3Jh
# dGlvbjEmMCQGA1UEAxMdTWljcm9zb2Z0IFRpbWUtU3RhbXAgUENBIDIwMTAwDQYJ
# KoZIhvcNAQEFBQACBQDj9d6VMCIYDzIwMjEwMzEyMjAzNTMzWhgPMjAyMTAzMTMy
# MDM1MzNaMHcwPQYKKwYBBAGEWQoEATEvMC0wCgIFAOP13pUCAQAwCgIBAAICHOwC
# Af8wBwIBAAICEV0wCgIFAOP3MBUCAQAwNgYKKwYBBAGEWQoEAjEoMCYwDAYKKwYB
# BAGEWQoDAqAKMAgCAQACAwehIKEKMAgCAQACAwGGoDANBgkqhkiG9w0BAQUFAAOB
# gQAiMHEqaHHWb+InY73zZ4WMnb3zUtk+zEWWvgPgj9uZlU+VZ83gJLIHmvPg6zh+
# cQ+WKTnK1nH7y7x09u+t5w5gwzUcTln5pgwXgJM9KiPXE9ocGvH+XQP44hy/XyPt
# 2NZfMmpUC7nFVzyO6ocrF8m4JWLcRU3dSdXk1cEMEOiz3TGCAw0wggMJAgEBMIGT
# MHwxCzAJBgNVBAYTAlVTMRMwEQYDVQQIEwpXYXNoaW5ndG9uMRAwDgYDVQQHEwdS
# ZWRtb25kMR4wHAYDVQQKExVNaWNyb3NvZnQgQ29ycG9yYXRpb24xJjAkBgNVBAMT
# HU1pY3Jvc29mdCBUaW1lLVN0YW1wIFBDQSAyMDEwAhMzAAABN0GPQ+daW2+nAAAA
# AAE3MA0GCWCGSAFlAwQCAQUAoIIBSjAaBgkqhkiG9w0BCQMxDQYLKoZIhvcNAQkQ
# AQQwLwYJKoZIhvcNAQkEMSIEIB4wm5eMUbxNQme2SrB6PAAo8vNffGe3xdhsC7Zr
# j4UMMIH6BgsqhkiG9w0BCRACLzGB6jCB5zCB5DCBvQQgHVl+r8CeBJ0iyX/aGZD2
# YbQ7gk+U7N7BQiTDKAYSHBAwgZgwgYCkfjB8MQswCQYDVQQGEwJVUzETMBEGA1UE
# CBMKV2FzaGluZ3RvbjEQMA4GA1UEBxMHUmVkbW9uZDEeMBwGA1UEChMVTWljcm9z
# b2Z0IENvcnBvcmF0aW9uMSYwJAYDVQQDEx1NaWNyb3NvZnQgVGltZS1TdGFtcCBQ
# Q0EgMjAxMAITMwAAATdBj0PnWltvpwAAAAABNzAiBCADCV3HNld5nQOlzF+LFpEk
# aKhxyPZGeQSaKAHT01SWfTANBgkqhkiG9w0BAQsFAASCAQCqW9RD73cFptBF/HYa
# acWwDUeMW8hBKeE0AupnWiEemeBEUyyRJOMocFvCDvcWms0RADgj3LBW3v3k4Jow
# iotBSX42vC5d0f9kJB6a59uMHHSnM8sMnzX7KsVPHxKTLM/njwcdDJbcrr5X9OYA
# scmcdMnMYwChki1GHtrI9p7Pj6Qq+PY6hL4o2lCx2U1asOm78ZhzDR0Pn0VShbvQ
# Sq5iNM8/s8yoi9Y7m2YugS8fhlqnZeAaf5fI+IVQj09DwaWhiLXk2edhX17qBpl4
# SljBV4QmeyruwxHLmRrC26RANXAXjC84g5D/QRtoymF21pBv/BeQLWeMua8WIf++
# tJJS
# SIG # End signature block