Functions/Set-OSServerConfig.ps1
|
function Set-OSServerConfig { <# .SYNOPSIS Configure or apply the current configuration to the OutSystems server .DESCRIPTION This cmdLet has two modes. Configure or Apply: In configure mode you can change configuration tool settings using the -SettingSection, -Setting, -Value and -Encrypted parameter The cmdLet will not check if SettingSection and Setting are valid OutSystems parameters. You need to know what you are doing here The Apply mode will run the OutSystems configuration tool with the configured settings For that you need to specify the -Apply parameter You can also specify the admin credentials for the platform, session and logging (only in OS11) databases In OS11 you may also add the -ConfigureCacheInvalidationService to configure RabbitMQ .PARAMETER SettingSection The setting section. When this is specified, the cmdLet will run in configure mode .PARAMETER Setting The setting .PARAMETER Value The value .PARAMETER Apply This will switch the cmdLet to apply mode .PARAMETER PlatformDBCredential PSCredential object with the admin credentials to the platform database .PARAMETER SessionDBCredential PSCredential object with the admin credentials to the session database .PARAMETER LogDBCredential PSCredential object with the admin credentials to the logging database. This is only available in OutSystems 11 .PARAMETER ConfigureCacheInvalidationService If specified, the cmdLet will also configure RabbitMQ .EXAMPLE Set-OSServerConfig -SettingSection 'CacheInvalidationConfiguration' -Setting 'ServiceUsername' -Value 'admin' .EXAMPLE Set-OSServerConfig -SettingSection 'CacheInvalidationConfiguration' -Setting 'ServicePassword' -Value 'mysecretpass' .EXAMPLE Set-OSServerConfig -Apply -PlatformDBCredential sa .EXAMPLE Set-OSServerConfig -Apply -PlatformDBCredential sa -SessionDBCredential sa -LogDBCredential sa -ConfigureCacheInvalidationService .NOTES Check the server.hsconf file on the platform server installation folder to know which section settings and settings are available If you dont specify database credentials, the configuration tool will try the current user credentials and then admin user specified on the configuration #> [CmdletBinding(DefaultParameterSetName = 'ChangeSettings')] param( [Parameter(ParameterSetName = 'ChangeSettings', Mandatory = $true)] [ValidateNotNullOrEmpty()] [ValidatePattern('^[a-zA-Z]+$')] [string]$SettingSection, [Parameter(ParameterSetName = 'ChangeSettings', Mandatory = $true)] [ValidateNotNullOrEmpty()] [ValidatePattern('^[a-zA-Z]+$')] [string]$Setting, [Parameter(ValueFromPipeline = $true, ParameterSetName = 'ChangeSettings', Mandatory = $true)] [ValidateNotNullOrEmpty()] [string]$Value, #[Parameter(ParameterSetName = 'ChangeSettings')] #[switch]$Encrypted, [Parameter(ParameterSetName = 'ApplyConfig')] [ValidateNotNullOrEmpty()] [System.Management.Automation.Credential()] [System.Management.Automation.PSCredential]$PlatformDBCredential, [Parameter(ParameterSetName = 'ApplyConfig')] [ValidateNotNullOrEmpty()] [System.Management.Automation.Credential()] [System.Management.Automation.PSCredential]$SessionDBCredential, [Parameter(ParameterSetName = 'ApplyConfig')] [switch]$Apply ) dynamicParam { $paramDictionary = New-Object System.Management.Automation.RuntimeDefinedParameterDictionary # Get the platform major version $osVersion = GetServerVersion if ($osVersion) { $osMajorVersion = "$(([version]$osVersion).Major).$(([version]$osVersion).Minor)" # Version specific parameters switch ($osMajorVersion) { '11.0' { $ConfigureCacheInvalidationServiceAttrib = New-Object System.Management.Automation.ParameterAttribute $ConfigureCacheInvalidationServiceAttrib.ParameterSetName = 'ApplyConfig' $ConfigureCacheInvalidationServiceAttribCollection = New-Object System.Collections.ObjectModel.Collection[System.Attribute] $ConfigureCacheInvalidationServiceAttribCollection.Add($ConfigureCacheInvalidationServiceAttrib) $ConfigureCacheInvalidationServiceParam = New-Object System.Management.Automation.RuntimeDefinedParameter('ConfigureCacheInvalidationService', [switch], $ConfigureCacheInvalidationServiceAttribCollection) $LogDBCredentialAttrib = New-Object System.Management.Automation.ParameterAttribute $LogDBCredentialAttrib.ParameterSetName = 'ApplyConfig' $LogDBCredentialAttribCollection = New-Object System.Collections.ObjectModel.Collection[System.Attribute] $LogDBCredentialAttribCollection.Add($LogDBCredentialAttrib) $LogDBCredentialParam = New-Object System.Management.Automation.RuntimeDefinedParameter('LogDBCredential', [System.Management.Automation.PSCredential], $LogDBCredentialAttribCollection) $paramDictionary.Add('ConfigureCacheInvalidationService', $ConfigureCacheInvalidationServiceParam) $paramDictionary.Add('LogDBCredential', $LogDBCredentialParam) } } } return $paramDictionary } begin { LogMessage -Function $($MyInvocation.Mycommand) -Phase 0 -Stream 0 -Message "Starting" SendFunctionStartEvent -InvocationInfo $MyInvocation $osInstallDir = GetServerInstallDir } process { #region pre-checks if (-not $(IsAdmin)) { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 3 -Message "The current user is not Administrator or not running this script in an elevated session" WriteNonTerminalError -Message "The current user is not Administrator or not running this script in an elevated session" return $null } if ($(-not $osVersion) -or $(-not $osInstallDir)) { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 3 -Message "OutSystems platform is not installed" WriteNonTerminalError -Message "OutSystems platform is not installed" return $null } if ($(-not $(Test-Path -Path "$osInstallDir\server.hsconf")) -or $(-not $(Test-Path -Path "$osInstallDir\private.key"))) { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 3 -Message "Cant find configuration file and/or private.key file. Please run New-OSServerConfig cmdLet to generate a new one" WriteNonTerminalError -Message "Cant find configuration file and/or private.key. Please run New-OSServerConfig cmdLet to generate a new one" return $null } #endregion #region do things switch ($PsCmdlet.ParameterSetName) { #region change setttings 'ChangeSettings' { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "In modifying configuration mode" $configurationFile = "$osInstallDir\server.hsconf" # Load XML try { [xml]$hsConf = Get-Content ($configurationFile) -ErrorAction Stop } catch { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Exception $_.Exception -Stream 3 -Message "Error loading the configuration file (server.hsconf). Can't parse XML" WriteNonTerminalError -Message "Error loading the configuration file (server.hsconf). Can't parse XML" return $null } # Write setting in the configuration if (-not $($($hsConf.EnvironmentConfiguration).SelectSingleNode($SettingSection))) { # Create the config section LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Configuration section $SettingSection doesn't exists. Creating a new one" $newElement = $hsConf.CreateElement($SettingSection) $hsConf.EnvironmentConfiguration.AppendChild($newElement) | Out-Null } if ($($hsConf.EnvironmentConfiguration).SelectSingleNode($SettingSection).SelectSingleNode($Setting)) { # Delete the existing setting LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Setting $Setting already exists. Deleting" $nodeToDelete = $hsConf.EnvironmentConfiguration.$SettingSection.SelectSingleNode($Setting) $hsConf.EnvironmentConfiguration.SelectSingleNode($SettingSection).RemoveChild($nodeToDelete) | Out-Null } # Create the new setting LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Creating the new setting $Setting" $newElement = $hsConf.CreateElement($Setting) $hsConf.EnvironmentConfiguration.SelectSingleNode($SettingSection).AppendChild($newElement) | Out-Null # Encrypt value # This only works after running the config tool # Will check this later. For now we disabled this option #Cannot find the private key path # at #0mb.#lp.#MDb.#cp() # at #0mb.#ep.InnerApplyAlgorithm(String value) # at OutSystems.RuntimeCommon.Cryptography.VersionedAlgorithms.VersionedCryptographyAlgorithms`1.ApplySpecificAlgorithm(String value, Int32 algorithmIdx) # at OutSystems.HubEdition.RuntimePlatform.Settings.EncryptString(String text) # at CallSite.Target(Closure , CallSite , Type , String ) if ($Encrypted.IsPresent) { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Value will be encrypted" $nodeAttrib = $hsConf.EnvironmentConfiguration.$SettingSection.SelectSingleNode($Setting).OwnerDocument.CreateAttribute('encrypted') $nodeAttrib.Value = 'true' try { $encryptedValue = EncryptSetting -Setting $Value } catch { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Exception $_.Exception -Stream 3 -Message "Error encrypting value" WriteNonTerminalError -Message "Error encrypting value" return $null } # Encrypted value is good $Value = $encryptedValue $hsConf.EnvironmentConfiguration.$SettingSection.SelectSingleNode($Setting).Attributes.Append($nodeAttrib) | Out-Null } # Writting the value LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Setting '$SettingSection/$Setting' to '$Value'" $hsConf.EnvironmentConfiguration.$SettingSection.SelectSingleNode($Setting).InnerXML = $Value LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Saving configuration" try { $hsConf.Save($configurationFile) } catch { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Exception $_.Exception -Stream 3 -Message "Error saving the configuration file" WriteNonTerminalError -Message "Error saving the configuration file" return $null } } #endregion #region apply settings 'ApplyConfig' { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "In apply configuration mode" LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Building configuration tool command line" # Build the command line $configToolArguments = "/setupinstall " if ($PlatformDBCredential) { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Using supplied admin credentials for the platform database" $dbUser = $PlatformDBCredential.UserName $dbPass = $PlatformDBCredential.GetNetworkCredential().Password $configToolArguments += "$dbUser $dbPass " } else { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Using existing admin credentials for the platform database" $configToolArguments += " " } if ($osMajorVersion -eq '11.0') { if ($PSBoundParameters.LogDBCredential) { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Using supplied admin credentials for the log database" $dbUser = $PSBoundParameters.LogDBCredential.UserName $dbPass = $PSBoundParameters.LogDBCredential.GetNetworkCredential().Password $configToolArguments += "$dbUser $dbPass " } else { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Using existing admin credentials for the log database" $configToolArguments += " " } } $configToolArguments += "/rebuildsession " if ($SessionDBCredential) { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Using supplied admin credentials for the session database" $dbUser = $SessionDBCredential.UserName $dbPass = $SessionDBCredential.GetNetworkCredential().Password $configToolArguments += "$dbUser $dbPass " } else { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Using existing admin credentials for the session database" $configToolArguments += " " } if ($PSBoundParameters.ConfigureCacheInvalidationService.IsPresent) { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Configuration of the cache invalidation service will be performed" $configToolArguments += "/createupgradecacheinvalidationservice " } LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Configuring the platform. This can take a while..." try { $result = RunConfigTool -Arguments $configToolArguments } catch { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Exception $_.Exception -Stream 3 -Message "Error lauching the configuration tool" WriteNonTerminalError -Message "Error launching the configuration tool. Exit code: $($result.ExitCode)" return $null } $confToolOutputLog = $($result.Output) -Split ("`r`n") foreach ($logline in $confToolOutputLog) { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Configuration Tool: $logline" } LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Configuration tool exit code: $($result.ExitCode)" if ($result.ExitCode -ne 0) { LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 3 -Message "Error configuring the platform. Exit code: $($result.ExitCode)" WriteNonTerminalError -Message "Error configuring the platform. Exit code: $($result.ExitCode)" return $null } LogMessage -Function $($MyInvocation.Mycommand) -Phase 1 -Stream 0 -Message "Platform successfully configured" } #endregion } #endregion } end { SendFunctionEndEvent -InvocationInfo $MyInvocation LogMessage -Function $($MyInvocation.Mycommand) -Phase 2 -Stream 0 -Message "Ending" } } |