StigData/Processed/IISSite-10.0-1.2.xml

<DISASTIG version="1" classification="UNCLASSIFIED" customname="" stigid="IIS_10-0_Site_STIG" description="This Security Technical Implementation Guide is published as a tool to improve the security of Department of Defense (DoD) information systems. The requirements are derived from the National Institute of Standards and Technology (NIST) 800-53 and related documents. Comments or proposed revisions to this document should be sent via email to the following address: disa.stig_spt@mail.mil." filename="U_MS_IIS_10-0_Site_V1R2_Manual-xccdf.xml" releaseinfo="Release: 2 Benchmark Date: 24 Jul 2020" title="Microsoft IIS 10.0 Site Security Technical Implementation Guide" notice="terms-of-use" source="STIG.DOD.MIL" fullversion="1.2" created="8/5/2020">
  <DocumentRule dscresourcemodule="None">
    <Rule id="V-100209" severity="medium" conversionstatus="pass" title="SRG-APP-000141-WSR-000082" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;IIS 10.0 will either allow or deny script execution based on file extension. The ability to control script execution is controlled through two features with IIS 10.0, Request Filtering and Handler Mappings.
 
For Handler Mappings, the ISSO must document and approve all allowable file extensions the website allows (white list) and denies (black list). The white list and black list will be compared to the Handler Mappings in IIS 8. Handler Mappings at the site level take precedence over Handler Mappings at the server level.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>For Handler Mappings, the ISSO must document and approve all allowable scripts the website allows (white list) and denies (black list). The white list and black list will be compared to the Handler Mappings in IIS 10.0. Handler Mappings at the site level take precedence over Handler Mappings at the server level.
 
Open the IIS 10.0 Manager.
 
Click the site name under review.
 
Double-click "Handler Mappings".
 
If any script file extensions from the black list are enabled, this is a finding.</RawString>
    </Rule>
    <Rule id="V-100211" severity="medium" conversionstatus="pass" title="SRG-APP-000141-WSR-000083" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;IIS 10.0 will either allow or deny script execution based on file extension. The ability to control script execution is controlled through two features with IIS 10.0, Request Filtering and Handler Mappings.
 
For Request Filtering, the ISSO must document and approve all allowable file extensions the website allows (white list) and denies (black list) by the website. The white list and black list will be compared to the Request Filtering in IIS 10.0. Request Filtering at the site level take precedence over Request Filtering at the server level.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>For Request Filtering, the ISSO must document and approve all allowable scripts the website allows (white list) and denies (black list). The white list and black list will be compared to the Request Filtering in IIS 10.0. Request Filtering at the site level take precedence over Request Filtering at the server level.
 
Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name to review.
 
Double-click Request Filtering-&gt;File Name Extensions Tab.
 
If any script file extensions from the black list are not denied, this is a finding.</RawString>
    </Rule>
    <Rule id="V-100217" severity="medium" conversionstatus="pass" title="SRG-APP-000142-WSR-000089" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;The web server must be configured to listen on a specified IP address and port. Without specifying an IP address and port for the web server to use, the web server will listen on all IP addresses available to the hosting server. If the web server has multiple IP addresses, i.e., a management IP address, the web server will also accept connections on the management IP address.
 
Accessing the hosted application through an IP address normally used for non-application functions opens the possibility of user access to resources, utilities, files, ports, and protocols that are protected on the desired application IP address.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
Right-click on the site name under review.
Select "Edit Bindings".
 
Verify there are hostname entries and unique IP addresses assigned to port 80 for HTTP and port 443 for HTTPS. Other approved and documented ports may be used.
 
If both hostname entries and unique IP addresses are not configured to port 80 for HTTP and port 443 for HTTPS (or other approved and documented port), this is a finding.
 
Note: If certificate handling is performed at the Proxy/Load Balancer, this is not a finding.
 
Note: If HTTP/Port 80 is not being used, and is not configured as above, this is not a finding.
 
Note: If this IIS 10.0 installation is supporting Microsoft Exchange, and not otherwise hosting any content, this requirement is Not Applicable.</RawString>
    </Rule>
    <Rule id="V-100249" severity="medium" conversionstatus="pass" title="SRG-APP-000316-WSR-000170" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;During an attack on the web server or any of the hosted applications, the system administrator may need to disconnect or disable access by users to stop the attack.
 
The web server must provide a capability to disconnect users to a hosted application without compromising other hosted applications unless deemed necessary to stop the attack. Methods to disconnect or disable connections are to stop the application service for a specified hosted application, stop the web server, or block all connections through web server access list.
 
The web server capabilities used to disconnect or disable users from connecting to hosted applications and the web server must be documented to make certain that during an attack, the proper action is taken to conserve connectivity to any other hosted application if possible and to make certain log data is conserved for later forensic analysis.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Interview the System Administrator and Web Manager.
 
Ask for documentation for the IIS 10.0 web server administration.
 
Verify there are documented procedures for shutting down an IIS 10.0 website in the event of an attack. The procedure should, at a minimum, provide the following steps:
 
Determine the respective website for the application at risk of an attack.
 
Access the IIS 10.0 web server IIS 10.0 Manager.
 
Select the respective website.
 
In the "Actions" pane, under "Manage Website", click "Stop".
 
If necessary, stop all websites.
 
If necessary, stop the IIS 10.0 web server by selecting the web server in the IIS 10.0 Manager.
 
In the "Actions" pane, under "Manage Server", click "Stop".
 
If there are not documented procedures with, at a minimum, the mentioned steps for stopping a website, this is a finding.</RawString>
    </Rule>
    <Rule id="V-100251" severity="medium" conversionstatus="pass" title="SRG-APP-000357-WSR-000150" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;To make certain the logging mechanism used by the web server has sufficient storage capacity in which to write the logs, the logging mechanism must be able to allocate log record storage capacity.
 
The task of allocating log record storage capacity is usually performed during initial installation of the logging mechanism. The system administrator will usually coordinate the allocation of physical drive space with the web server administrator along with the physical location of the partition and disk. Refer to NIST SP 800-92 for specific requirements on log rotation and storage dependent on the impact of the web server.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Access the IIS 10.0 web server IIS 10.0 Manager.
 
Under "IIS" double-click on the "Logging" icon.
 
In the "Logging" configuration box, determine the "Directory:" to which the "W3C" logging is being written.
 
Confirm with the System Administrator that the designated log path is of sufficient size to maintain the logging.
 
Under "Log File Rollover", verify "Do not create new log files" is not selected.
 
Verify a schedule is configured to rollover log files on a regular basis.
 
Consult with the System Administrator to determine if there is a documented process for moving the log files off of the IIS 10.0 web server to another logging device.
 
If the designated logging path device is not of sufficient space to maintain all log files and there is not a schedule to rollover files on a regular basis, this is a finding.</RawString>
    </Rule>
    <Rule id="V-100253" severity="medium" conversionstatus="pass" title="SRG-APP-000383-WSR-000175" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;Web servers provide numerous processes, features, and functionalities that use TCP/IP ports. Some of these processes may be deemed unnecessary or too unsecure to run on a production system.
 
The web server must provide the capability to disable or deactivate network-related services deemed to be non-essential to the server mission, too unsecure, or prohibited by the PPSM CAL and vulnerability assessments.
 
Failure to comply with DoD ports, protocols, and services (PPS) requirements can result in compromise of enclave boundary protections and/or functionality of the AIS.
 
The ISSM will ensure web servers are configured to use only authorized PPS in accordance with the Network Infrastructure STIG, DoD Instruction 8551.1, PPSM, and the associated PPS Assurance Category Assignments List.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Review the website to determine if HTTP and HTTPs (e.g., 80 and 443) are used in accordance with those ports and services registered and approved for use by the DoD PPSM. Any variation in PPS will be documented, registered, and approved by the PPSM.
 
Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name under review.
 
In the "Action" Pane, click "Bindings".
 
Review the ports and protocols. If unknown ports or protocols are used, then this is a finding.</RawString>
    </Rule>
  </DocumentRule>
  <IisLoggingRule dscresourcemodule="xWebAdministration">
    <Rule id="V-100199" severity="medium" conversionstatus="pass" title="SRG-APP-000092-WSR-000055" dscresource="XWebsite">
      <Description>&lt;VulnDiscussion&gt;Internet Information Services (IIS) on Windows Server 2012 provides basic logging capabilities. However, because IIS takes some time to flush logs to disk, administrators do not have access to logging information in real-time. In addition, text-based log files can be difficult and time-consuming to process.
 
In IIS 10.0, the administrator has the option of sending logging information to Event Tracing for Windows (ETW). This option gives the administrator the ability to use standard query tools, or create custom tools, for viewing real-time logging information in ETW. This provides a significant advantage over parsing text-based log files that are not updated in real time.
 
Satisfies: SRG-APP-000092-WSR-000055, SRG-APP-000108-WSR-000166&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <LogCustomFieldEntry />
      <LogFlags />
      <LogFormat />
      <LogPeriod />
      <LogTargetW3C>File,ETW</LogTargetW3C>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name.
 
Click the "Logging" icon.
 
Under Log Event Destination, verify the "Both log file and ETW event" radio button is selected.
 
If the "Both log file and ETW event" radio button is not selected, this is a finding.
 
Note: "Microsoft-IIS-Logging/logs" must be enabled prior to configuring this setting. More configuration information is available at:
https://blogs.intelink.gov/blogs/_disairrt/?p=1317</RawString>
    </Rule>
    <Rule id="V-100203" severity="medium" conversionstatus="pass" title="SRG-APP-000099-WSR-000061" dscresource="XWebsite">
      <Description>&lt;VulnDiscussion&gt;Web server logging capability is critical for accurate forensic analysis. Without sufficient and accurate information, a correct replay of the events cannot be determined.
 
Ascertaining the success or failure of an event is important during forensic analysis. Correctly determining the outcome will add information to the overall reconstruction of the loggable event. By determining the success or failure of the event correctly, analysis of the enterprise can be undertaken to determine if events tied to the event occurred in other areas within the enterprise.
 
Without sufficient information establishing the success or failure of the logged event, investigation into the cause of event is severely hindered. The success or failure also provides a means to measure the impact of an event and help authorized personnel to determine the appropriate response. Log record content that may be necessary to satisfy the requirement of this control includes, but is not limited to, time stamps, source and destination IP addresses, user/process identifiers, event descriptions, application-specific events, success/fail indications, file names involved, access control, or flow control rules invoked.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <LogCustomFieldEntry>
        <Entry>
          <SourceType>RequestHeader</SourceType>
          <SourceName>Connection</SourceName>
        </Entry>
        <Entry>
          <SourceType>RequestHeader</SourceType>
          <SourceName>Warning</SourceName>
        </Entry>
      </LogCustomFieldEntry>
      <LogFlags />
      <LogFormat>W3C</LogFormat>
      <LogPeriod />
      <LogTargetW3C />
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Select the website being reviewed.
 
Under "IIS", double-click the "Logging" icon.
 
Verify the "Format:" under "Log File" is configured to "W3C".
 
Select "Fields".
 
Under "Custom Fields", verify the following fields are selected:
 
Request Header &gt;&gt; Connection
 
Request Header &gt;&gt; Warning
 
If any of the above fields are not selected, this is a finding.</RawString>
    </Rule>
    <Rule id="V-100205" severity="medium" conversionstatus="pass" title="SRG-APP-000100-WSR-000064" dscresource="XWebsite">
      <Description>&lt;VulnDiscussion&gt;Web server logging capability is critical for accurate forensic analysis. Without sufficient and accurate information, a correct replay of the events cannot be determined.
 
Determining user accounts, processes running on behalf of the user, and running process identifiers also enable a better understanding of the overall event. User tool identification is also helpful to determine if events are related to overall user access or specific client tools.
 
Log record content that may be necessary to satisfy the requirement of this control includes: time stamps, source and destination addresses, user/process identifiers, event descriptions, success/fail indications, file names involved, and access control or flow control rules invoked.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <LogCustomFieldEntry>
        <Entry>
          <SourceType>RequestHeader</SourceType>
          <SourceName>Authorization</SourceName>
        </Entry>
        <Entry>
          <SourceType>ResponseHeader</SourceType>
          <SourceName>Content-Type</SourceName>
        </Entry>
      </LogCustomFieldEntry>
      <LogFlags>UserAgent,UserName,Referer</LogFlags>
      <LogFormat>W3C</LogFormat>
      <LogPeriod />
      <LogTargetW3C />
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Access the IIS 10.0 web server IIS 10.0 Manager.
 
Under "IIS", double-click the "Logging" icon.
 
Verify the "Format:" under "Log File" is configured to "W3C".
 
Select "Fields".
 
Under "Standard Fields", verify "User Agent", "User Name", and "Referrer" are selected.
 
Under "Custom Fields", verify the following fields have been configured:
 
Request Header &gt;&gt; Authorization
 
Response Header &gt;&gt; Content-Type
 
If any of the above fields are not selected, this is a finding.</RawString>
    </Rule>
  </IisLoggingRule>
  <ManualRule dscresourcemodule="None">
    <Rule id="V-100201" severity="medium" conversionstatus="pass" title="SRG-APP-000098-WSR-000060" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;Web server logging capability is critical for accurate forensic analysis. Without sufficient and accurate information, a correct replay of the events cannot be determined.
 
Ascertaining the correct source (e.g., source IP), of the events is important during forensic analysis. Correctly determining the source of events will add information to the overall reconstruction of the loggable event. By determining the source of the event correctly, analysis of the enterprise can be undertaken to determine if events tied to the source occurred in other areas within the enterprise.
 
A web server behind a load balancer or proxy server, when not configured correctly, will record the load balancer or proxy server as the source of every loggable event. When looking at the information forensically, this information is not helpful in the investigation of events. The web server must record with each event the client source of the event.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Interview the System Administrator to review the configuration of the IIS 10.0 architecture and determine if inbound web traffic is passed through a proxy.
 
If the IIS 10.0 is receiving inbound web traffic through a proxy, the audit logs must be reviewed to determine if correct source information is being passed through by the proxy server.
 
Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name.
 
Click the "Logging" icon.
 
Click "View log file".
 
When log file is displayed, review source IP information in log entries and verify entries do not reflect the IP address of the proxy server.
 
If the website is not behind a load balancer or proxy server, this is Not Applicable.
 
If the log entries in the log file(s) reflect the IP address of the proxy server as the source, this is a finding.
 
If provisions have been made to log the client IP via another field (i.e., utilizing X-Forwarded-For), this is not a finding.</RawString>
    </Rule>
    <Rule id="V-100221" severity="high" conversionstatus="pass" title="SRG-APP-000211-WSR-000031" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;Many of the security problems that occur are not the result of a user gaining access to files or data for which the user does not have permissions, but rather users are assigned incorrect permissions to unauthorized data. The files, directories, and data stored on the web server must be evaluated and a determination made concerning authorized access to information and programs on the server. Only authorized users and administrative accounts will be allowed on the host server in order to maintain the web server, applications, and review the server operations.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Check the account used for anonymous access to the website.
 
Follow the procedures below for each site hosted on the IIS 10.0 web server:
Open the IIS 10.0 Manager.
 
Double-click "Authentication" in the IIS section of the website’s Home Pane.
 
If Anonymous access is disabled, this is Not a Finding.
 
If Anonymous access is enabled, click "Anonymous Authentication".
 
Click "Edit" in the "Actions" pane.
 
If the "Specific user" radio button is enabled and an ID is specified in the adjacent control box, this is the ID being used for anonymous access. Note: account name.
 
Check privileged groups that may allow the anonymous account inappropriate membership:
Open "Server Manager" on the machine.
 
Expand Configuration.
 
Expand Local Users and Groups.
 
Click "Groups".
 
Review members of any of the following privileged groups:
 
Administrators
Backup Operators
Certificate Services (of any designation)
Distributed COM Users
Event Log Readers
Network Configuration Operators
Performance Log Users
Performance Monitor Users
Power Users
Print Operators
Remote Desktop Users
Replicator
 
Double-click each group and review its members.
 
If the IUSR account or any account noted above used for anonymous access is a member of any group with privileged access, this is a finding.</RawString>
    </Rule>
    <Rule id="V-100225" severity="medium" conversionstatus="pass" title="SRG-APP-000233-WSR-000146" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;The web document (home) directory is accessed by multiple anonymous users when the web server is in production. By locating the web document (home) directory on the same partition as the web server system file, the risk for unauthorized access to these protected files is increased. Additionally, having the web document (home) directory path on the same drive as the system folders also increases the potential for a drive space exhaustion attack.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name under review.
 
Click the "Advanced Settings" from the "Actions" pane.
 
Review the Physical Path.
 
If the Path is on the same partition as the OS, this is a finding.
 
Note: If this IIS 10.0 installation is supporting Microsoft Exchange, and not otherwise hosting any content, this requirement is Not Applicable.</RawString>
    </Rule>
    <Rule id="V-100255" severity="medium" conversionstatus="pass" title="SRG-APP-000427-WSR-000186" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;The use of a DoD PKI certificate ensures clients the private website they are connecting to is legitimate, and is an essential part of the DoD defense-in-depth strategy.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name under review.
 
Click "Bindings" in the "Action" Pane.
 
Click the "HTTPS type" from the box.
 
Click "Edit".
 
Click "View" and then review and verify the certificate path.
 
If the list of CAs in the trust hierarchy does not lead to the DoD PKI Root CA, DoD-approved external certificate authority (ECA), or DoD-approved external partner, this is a finding.
 
If HTTPS is not an available type under site bindings, this is a finding.
 
If HTTPS is not an available type under site bindings, and the Web Server ONLY communicates directly with a load balancer/proxy server with IP address and Domain Restrictions in place, this is not a finding.</RawString>
    </Rule>
    <Rule id="V-100263" severity="medium" conversionstatus="pass" title="SRG-APP-000516-WSR-000174" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;Application pools isolate sites and applications to address reliability, availability, and security issues. Sites and applications may be grouped according to configurations, although each site will be associated with a unique application pool.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Note: If the IIS Application Pool is hosting Microsoft SharePoint, this is Not Applicable.
 
If this IIS 10.0 installation is supporting Microsoft Exchange, and not otherwise hosting any content, this requirement is Not Applicable.
 
Open the IIS 10.0 Manager.
 
Click "Application Pools".
 
In the list of Application Pools, review the "Applications" column and verify unique application pools for each website.
 
If any Application Pools are being used for more than one website, this is a finding.</RawString>
    </Rule>
    <Rule id="V-100279" severity="medium" conversionstatus="pass" title="SRG-APP-000141-WSR-000087" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;CGI and ASP scripts represent one of the most common and exploitable means of compromising a web server. All CGI and ASP program files must be segregated into their own unique folder to simplify the protection of these files. ASP scripts must be placed into a unique folder only containing other ASP scripts. JAVA and other technology-specific scripts must also be placed into their own unique folders. The placement of CGI, ASP, or equivalent scripts to special folders gives the Web Manager or the System Administrator (SA) control over what goes into those folders and to facilitate access control at the folder level.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Determine whether scripts are used on the web server for the target website. Common file extensions include, but are not limited to: .cgi, .pl, .vbs, .class, .c, .php, and .asp.
 
All interactive programs must be placed in unique designated folders based on CGI or ASP script type. For modular and/or third-party applications, it is permissible to have script files in multiple folders.
 
Open the IIS 10.0 Manager.
 
Right-click the IIS 10.0 web site name and select "Explore".
 
Search for the listed script extensions. Each script type must be in its unique designated folder.
 
If scripts are not segregated from web content and in their own unique folders, this is a finding.</RawString>
    </Rule>
    <Rule id="V-100281" severity="medium" conversionstatus="pass" title="SRG-APP-000141-WSR-000087" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;CGI is a programming standard for interfacing external applications with information servers, such as HTTP or web servers. CGI, represented by all upper case letters, should not be confused with the .cgi file extension. The .cgi file extension does represent a CGI script, but CGI scripts may be written in a number of programming languages (e.g., PERL, C, PHP, and JavaScript), each having their own unique file extension.
 
The use of CGI scripts represent one of the most common and exploitable means of compromising a web server. By definition, CGI scripts are executable by the operating system of the host server. While access control is provided via the web service, the execution of CGI programs is not limited unless the System Administrator (SA) or the Web Manager takes specific measures. CGI programs can access and alter data files, launch other programs, and use the network.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Determine whether scripts are used on the web server for the subject website. Common file extensions include, but are not limited to: .cgi, .pl, .vb, .class, .c, .php, and .asp.
 
If the website does not utilize CGI, this finding is Not Applicable.
 
All interactive programs must have restrictive permissions.
 
Open the IIS 10.0 Manager.
 
Right-click the IIS 10.0 web site name and select "Explore".
 
Search for the listed script extensions.
 
Review the permissions to the CGI scripts and verify only the permissions listed, or more restrictive permissions are assigned.
 
Administrators: FULL
Web Administrators: FULL
TrustedInstaller: FULL
ALL APPLICATION PACKAGES: Read
ALL RESTRICTED APPLICATION PACKAGES: Read
SYSTEM: FULL
ApplicationPoolId: READ
Custom Service Account: READ
Users: READ
 
If the permissions are less restrictive than listed above, this is a finding.
</RawString>
    </Rule>
    <Rule id="V-100283" severity="medium" conversionstatus="pass" title="SRG-APP-000141-WSR-000087" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;Copies of backup files will not execute on the server, but they can be read by the anonymous user if special precautions are not taken. Such backup copies contain the same sensitive information as the actual script being executed and, as such, are useful to malicious users. Techniques and systems exist today to search web servers for such files and are able to exploit the information contained in them.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Determine whether scripts are used on the web server for the subject website. Common file extensions include, but are not limited to: .cgi, .pl, .vb, .class, .c, .php, .asp, and .aspx. The scope of this requirement is to analyze only within the web server content directories, not the entire underlying operating system.
 
If the website does not utilize CGI, this finding is Not Applicable.
 
Open the IIS 10.0 Manager.
 
Right-click the IIS 10.0 web site name and select "Explore".
 
Search for the listed script extensions
 
Search for the following files: *.bak, *.old, *.temp, *.tmp, *.backup, or “copy of...”.
 
If files with these extensions are found, this is a finding.</RawString>
    </Rule>
    <Rule id="V-100285" severity="medium" conversionstatus="pass" title="SRG-APP-000516-WSR-000174" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;A consent banner will be in place to inform prospective entrants the website they are about to enter is a DoD website and their activity is subject to monitoring. The document, DoDI 8500.01, establishes the policy on the use of DoD information systems. It requires the use of a standard Notice and Consent Banner and standard text to be included in user agreements. The requirement for the banner is for websites with security and access controls. These are restricted and not publicly accessible. If the website does not require authentication/authorization for use, then the banner does not need to be present. A manual check of the document root directory for a banner page file (such as banner.html) or navigation to the website via a browser can be used to confirm the information provided from interviewing the web staff.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Note: This requirement is only applicable for private DoD websites.
 
If a banner is required, the following banner page must be in place:
 
“You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only.
 
By using this IS (which includes any device attached to this IS), you consent to the following conditions:
 
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
 
- At any time, the USG may inspect and seize data stored on this IS.
 
- Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
 
- This IS includes security measures (e.g., authentication and access controls) to protect USG interests—not for your personal benefit or privacy.
 
- Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.”
 
OR
 
If your system cannot meet the character limits to store this amount of text in the banner, the following is another option for the warning banner:
 
"I've read &amp; consent to terms in IS user agreem't."
 
NOTE: While DoDI 8500.01 does not contain a copy of the banner to be used, it does point to the RMF Knowledge Service for a copy of the required text. It is also noted that the banner is to be displayed only once when the individual enters the site and not for each page.
 
If the access-controlled website does not display this banner page before entry, this is a finding.</RawString>
    </Rule>
  </ManualRule>
  <MimeTypeRule dscresourcemodule="xWebAdministration">
    <Rule id="V-100207.a" severity="medium" conversionstatus="pass" title="SRG-APP-000141-WSR-000081" dscresource="xIisMimeTypeMapping">
      <Description>&lt;VulnDiscussion&gt;Controlling what a user of a hosted application can access is part of the security posture of the web server. Any time a user can access more functionality than is needed for the operation of the hosted application poses a security issue. A user with too much access can view information that is not needed for the user's job role, or could use the function in an unintentional manner.
 
A MIME tells the web server what type of program various file types and extensions are and what external utilities or programs are needed to execute the file type.
 
A shell is a program that serves as the basic interface between the user and the operating system, so hosted application users must not have access to these programs. Shell programs may execute shell escapes and can then perform unauthorized activities that could damage the security posture of the web server.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <Ensure>Absent</Ensure>
      <Extension>.exe</Extension>
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <MimeType>application/octet-stream</MimeType>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
Open the IIS 10.0 Manager.
Click on the IIS 10.0 site.
Under IIS, double-click the “MIME Types” icon.
From the "Group by:" drop-down list, select "Content Type".
From the list of extensions under "Application", verify MIME types for OS shell program extensions have been removed, to include at a minimum, the following extensions:
If any OS shell MIME types are configured, this is a finding.
.exe</RawString>
    </Rule>
    <Rule id="V-100207.b" severity="medium" conversionstatus="pass" title="SRG-APP-000141-WSR-000081" dscresource="xIisMimeTypeMapping">
      <Description>&lt;VulnDiscussion&gt;Controlling what a user of a hosted application can access is part of the security posture of the web server. Any time a user can access more functionality than is needed for the operation of the hosted application poses a security issue. A user with too much access can view information that is not needed for the user's job role, or could use the function in an unintentional manner.
 
A MIME tells the web server what type of program various file types and extensions are and what external utilities or programs are needed to execute the file type.
 
A shell is a program that serves as the basic interface between the user and the operating system, so hosted application users must not have access to these programs. Shell programs may execute shell escapes and can then perform unauthorized activities that could damage the security posture of the web server.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <Ensure>Absent</Ensure>
      <Extension>.dll</Extension>
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <MimeType>application/x-msdownload</MimeType>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
Open the IIS 10.0 Manager.
Click on the IIS 10.0 site.
Under IIS, double-click the “MIME Types” icon.
From the "Group by:" drop-down list, select "Content Type".
From the list of extensions under "Application", verify MIME types for OS shell program extensions have been removed, to include at a minimum, the following extensions:
If any OS shell MIME types are configured, this is a finding.
.dll</RawString>
    </Rule>
    <Rule id="V-100207.c" severity="medium" conversionstatus="pass" title="SRG-APP-000141-WSR-000081" dscresource="xIisMimeTypeMapping">
      <Description>&lt;VulnDiscussion&gt;Controlling what a user of a hosted application can access is part of the security posture of the web server. Any time a user can access more functionality than is needed for the operation of the hosted application poses a security issue. A user with too much access can view information that is not needed for the user's job role, or could use the function in an unintentional manner.
 
A MIME tells the web server what type of program various file types and extensions are and what external utilities or programs are needed to execute the file type.
 
A shell is a program that serves as the basic interface between the user and the operating system, so hosted application users must not have access to these programs. Shell programs may execute shell escapes and can then perform unauthorized activities that could damage the security posture of the web server.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <Ensure>Absent</Ensure>
      <Extension>.com</Extension>
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <MimeType>application/octet-stream</MimeType>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
Open the IIS 10.0 Manager.
Click on the IIS 10.0 site.
Under IIS, double-click the “MIME Types” icon.
From the "Group by:" drop-down list, select "Content Type".
From the list of extensions under "Application", verify MIME types for OS shell program extensions have been removed, to include at a minimum, the following extensions:
If any OS shell MIME types are configured, this is a finding.
.com</RawString>
    </Rule>
    <Rule id="V-100207.d" severity="medium" conversionstatus="pass" title="SRG-APP-000141-WSR-000081" dscresource="xIisMimeTypeMapping">
      <Description>&lt;VulnDiscussion&gt;Controlling what a user of a hosted application can access is part of the security posture of the web server. Any time a user can access more functionality than is needed for the operation of the hosted application poses a security issue. A user with too much access can view information that is not needed for the user's job role, or could use the function in an unintentional manner.
 
A MIME tells the web server what type of program various file types and extensions are and what external utilities or programs are needed to execute the file type.
 
A shell is a program that serves as the basic interface between the user and the operating system, so hosted application users must not have access to these programs. Shell programs may execute shell escapes and can then perform unauthorized activities that could damage the security posture of the web server.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <Ensure>Absent</Ensure>
      <Extension>.bat</Extension>
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <MimeType>application/x-bat</MimeType>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
Open the IIS 10.0 Manager.
Click on the IIS 10.0 site.
Under IIS, double-click the “MIME Types” icon.
From the "Group by:" drop-down list, select "Content Type".
From the list of extensions under "Application", verify MIME types for OS shell program extensions have been removed, to include at a minimum, the following extensions:
If any OS shell MIME types are configured, this is a finding.
.bat</RawString>
    </Rule>
    <Rule id="V-100207.e" severity="medium" conversionstatus="pass" title="SRG-APP-000141-WSR-000081" dscresource="xIisMimeTypeMapping">
      <Description>&lt;VulnDiscussion&gt;Controlling what a user of a hosted application can access is part of the security posture of the web server. Any time a user can access more functionality than is needed for the operation of the hosted application poses a security issue. A user with too much access can view information that is not needed for the user's job role, or could use the function in an unintentional manner.
 
A MIME tells the web server what type of program various file types and extensions are and what external utilities or programs are needed to execute the file type.
 
A shell is a program that serves as the basic interface between the user and the operating system, so hosted application users must not have access to these programs. Shell programs may execute shell escapes and can then perform unauthorized activities that could damage the security posture of the web server.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <Ensure>Absent</Ensure>
      <Extension>.csh</Extension>
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <MimeType>application/x-csh</MimeType>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
Open the IIS 10.0 Manager.
Click on the IIS 10.0 site.
Under IIS, double-click the “MIME Types” icon.
From the "Group by:" drop-down list, select "Content Type".
From the list of extensions under "Application", verify MIME types for OS shell program extensions have been removed, to include at a minimum, the following extensions:
If any OS shell MIME types are configured, this is a finding.
.csh</RawString>
    </Rule>
  </MimeTypeRule>
  <SslSettingsRule dscresourcemodule="xWebAdministration">
    <Rule id="V-100195" severity="medium" conversionstatus="pass" title="SRG-APP-000014-WSR-000006" dscresource="xSslSettings">
      <Description>&lt;VulnDiscussion&gt;Transport Layer Security (TLS) encryption is a required security setting for a private web server. Encryption of private information is essential to ensuring data confidentiality. If private information is not encrypted, it can be intercepted and easily read by an unauthorized party. A private web server must use a FIPS 140-2-approved TLS version, and all non-FIPS-approved SSL versions must be disabled.
 
NIST SP 800-52 specifies the preferred configurations for government systems.
&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Note: If the server being reviewed is a public IIS 10.0 web server, this is Not Applicable.
 
Note: If SSL is installed on load balancer/proxy server through which traffic is routed to the IIS 10.0 server, and the IIS 10.0 server receives traffic from the load balancer/proxy server, the SSL requirement must be met on the load balancer/proxy server.
 
Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
Click the site name.
Double-click the "SSL Settings" icon.
Verify "Require SSL" check box is selected.
 
If the "Require SSL" check box is not selected, this is a finding.</RawString>
      <Value>Ssl</Value>
    </Rule>
    <Rule id="V-100197" severity="medium" conversionstatus="pass" title="SRG-APP-000014-WSR-000006" dscresource="None">
      <Description>&lt;VulnDiscussion&gt;Transport Layer Security (TLS) encryption is a required security setting for a private web server. Encryption of private information is essential to ensuring data confidentiality. If private information is not encrypted, it can be intercepted and easily read by an unauthorized party. A private web server must use a FIPS 140-2-approved TLS version, and all non-FIPS-approved SSL versions must be disabled.
 
NIST SP 800-52 specifies the preferred configurations for government systems.
&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf>V-100195</DuplicateOf>
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Note: If the server being reviewed is a private IIS 10.0 web server, this is Not Applicable.
 
Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name.
 
Double-click the "SSL Settings" icon.
 
Verify "Require SSL" check box is selected.
 
If the "Require SSL" check box is not selected, this is a finding.</RawString>
      <Value>Ssl</Value>
    </Rule>
    <Rule id="V-100219" severity="medium" conversionstatus="pass" title="SRG-APP-000172-WSR-000104" dscresource="xSslSettings">
      <Description>&lt;VulnDiscussion&gt;A DoD private website must use PKI as an authentication mechanism for web users. Information systems residing behind web servers requiring authorization based on individual identity must use the identity provided by certificate-based authentication to support access control decisions. Not using client certificates allows an attacker unauthenticated access to private websites.
 
Satisfies: SRG-APP-000172-WSR-000104, SRG-APP-000224-WSR-000135, SRG-APP-000427-WSR-000186&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Note: If the server being reviewed is a public IIS 10.0 web server, this is Not Applicable.
Note: If certificate handling is performed at the Proxy/Load Balancer, this is not a finding.
 
Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Double-click the "SSL Settings" icon.
 
Verify the "Clients Certificate Required" check box is selected.
 
If the "Clients Certificate Required" check box is not selected, this is a finding.</RawString>
      <Value>SslRequireCert</Value>
    </Rule>
    <Rule id="V-100257" severity="medium" conversionstatus="pass" title="SRG-APP-000429-WSR-000113" dscresource="xSslSettings">
      <Description>&lt;VulnDiscussion&gt;When data is written to digital media, such as hard drives, mobile computers, external/removable hard drives, personal digital assistants, flash/thumb drives, etc., there is risk of data loss and data compromise. User identities and passwords stored on the hard drive of the hosting hardware must be encrypted to protect the data from easily being discovered and used by an unauthorized user to access the hosted applications. The cryptographic libraries and functionality used to store and retrieve the user identifiers and passwords must be part of the web server.
 
Satisfies: SRG-APP-000429-WSR-000113, SRG-APP-000439-WSR-000151, SRG-APP-000441-WSR-000181, SRG-APP-000442-WSR-000182&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Note: If SSL is installed on load balancer/proxy server through which traffic is routed to the IIS 10.0 server, and the IIS 10.0 server receives traffic from the load balancer/proxy server, the SSL requirement must be met on the load balancer/proxy server.
 
Note: If this is a public facing web server, this requirement is Not Applicable.
 
Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
Double-click the "SSL Settings" icon under the "IIS" section.
Verify "Require SSL" is checked.
Verify "Client Certificates Required" is selected.
Click the site under review.
Select "Configuration Editor" under the "Management" section.
From the "Section:" drop-down list at the top of the configuration editor, locate "system.webServer/security/access".
The value for "sslFlags" set must include "ssl128".
 
If the "Require SSL" is not selected, this is a finding.
If the "Client Certificates Required" is not selected, this is a finding.
If the "sslFlags" is not set to "ssl128", this is a finding.</RawString>
      <Value>Ssl,SslNegotiateCert,SslRequireCert,Ssl128</Value>
    </Rule>
  </SslSettingsRule>
  <WebAppPoolRule dscresourcemodule="xWebAdministration">
    <Rule id="V-100245" severity="medium" conversionstatus="pass" title="SRG-APP-000295-WSR-000012" dscresource="xWebAppPool">
      <Description>&lt;VulnDiscussion&gt;The idle time-out attribute controls the amount of time a worker process will remain idle before it shuts down. A worker process is idle if it is not processing requests and no new requests are received.
 
The purpose of this attribute is to conserve system resources; the default value for idle time-out is 20 minutes.
 
By default, the World Wide Web (WWW) service establishes an overlapped recycle, in which the worker process to be shut down is kept running until after a new worker process is started.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>idleTimeout</Key>
      <OrganizationValueRequired>True</OrganizationValueRequired>
      <OrganizationValueTestString>[TimeSpan]{0} -le [TimeSpan]'00:20:00' -and [TimeSpan]{0} -gt [TimeSpan]'00:00:00'</OrganizationValueTestString>
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
Click the Application Pools.
Highlight an Application Pool to review and click "Advanced Settings" in the "Actions" pane.
Scroll down to the "Process Model" section and verify the value for "Idle Time-out" is not "0".
 
If the "Idle Time-out" is set to "0", this is a finding.</RawString>
      <Value>
      </Value>
    </Rule>
    <Rule id="V-100265" severity="medium" conversionstatus="pass" title="SRG-APP-000516-WSR-000174" dscresource="xWebAppPool">
      <Description>&lt;VulnDiscussion&gt;IIS application pools can be periodically recycled to avoid unstable states possibly leading to application crashes, hangs, or memory leaks. By default, application pool recycling is overlapped, which means the worker process to be shut down is kept running until after a new worker process is started. After a new worker process starts, new requests are passed to it. The old worker process shuts down after it finishes processing its existing requests, or after a configured time-out, whichever comes first. This way of recycling ensures uninterrupted service to clients.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>restartRequestsLimit</Key>
      <OrganizationValueRequired>True</OrganizationValueRequired>
      <OrganizationValueTestString>{0} -ne 0</OrganizationValueTestString>
      <RawString>Note: If the IIS Application Pool is hosting Microsoft SharePoint, this is Not Applicable.
 
If this IIS 10.0 installation is supporting Microsoft Exchange, and not otherwise hosting any content, this requirement is Not Applicable.
 
Open the IIS 10.0 Manager.
 
Perform for each Application Pool.
 
Click "Application Pools".
 
Highlight an Application Pool and click "Advanced Settings" in the "Action" Pane.
 
Scroll down to the "Recycling section" and verify the value for "Request Limit" is set to a value other than "0".
 
If the "Request Limit" is set to a value of "0", this is a finding.</RawString>
      <Value>
      </Value>
    </Rule>
    <Rule id="V-100267" severity="medium" conversionstatus="pass" title="SRG-APP-000516-WSR-000174" dscresource="xWebAppPool">
      <Description>&lt;VulnDiscussion&gt;IIS application pools can be periodically recycled to avoid unstable states possibly leading to application crashes, hangs, or memory leaks. By default, application pool recycling is overlapped, which means the worker process to be shut down is kept running until after a new worker process is started. After a new worker process starts, new requests are passed to it. The old worker process shuts down after it finishes processing its existing requests, or after a configured time-out, whichever comes first. This way of recycling ensures uninterrupted service to clients.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>restartMemoryLimit</Key>
      <OrganizationValueRequired>True</OrganizationValueRequired>
      <OrganizationValueTestString>{0} -ne 0</OrganizationValueTestString>
      <RawString>Note: If the IIS Application Pool is hosting Microsoft SharePoint, this is Not Applicable.
 
If this IIS 10.0 installation is supporting Microsoft Exchange, and not otherwise hosting any content, this requirement is Not Applicable.
 
Open the IIS 10.0 Manager.
 
Perform the following for each Application Pool:
 
Click "Application Pools".
 
Highlight an Application Pool and click "Advanced Settings" in the Action Pane.
 
In the "Advanced Settings" dialog box scroll down to the "Recycling" section and verify the value for "Virtual Memory Limit" is not set to "0".
 
If the value for "Virtual Memory Limit" is set to "0", this is a finding.</RawString>
      <Value>
      </Value>
    </Rule>
    <Rule id="V-100269" severity="medium" conversionstatus="pass" title="SRG-APP-000516-WSR-000174" dscresource="xWebAppPool">
      <Description>&lt;VulnDiscussion&gt;IIS application pools can be periodically recycled to avoid unstable states possibly leading to application crashes, hangs, or memory leaks. By default, application pool recycling is overlapped, which means the worker process to be shut down is kept running until after a new worker process is started. After a new worker process starts, new requests are passed to it. The old worker process shuts down after it finishes processing its existing requests, or after a configured time-out, whichever comes first. This way of recycling ensures uninterrupted service to clients.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>restartPrivateMemoryLimit</Key>
      <OrganizationValueRequired>True</OrganizationValueRequired>
      <OrganizationValueTestString>{0} -ne 0</OrganizationValueTestString>
      <RawString>Note: If the IIS Application Pool is hosting Microsoft SharePoint, this is Not Applicable.
 
If this IIS 10.0 installation is supporting Microsoft Exchange, and not otherwise hosting any content, this requirement is Not Applicable.
 
Open the IIS 10.0 Manager.
 
Perform the following for each Application Pool:
 
Click "Application Pools".
 
Highlight an Application Pool and click "Advanced Settings" in the "Action" Pane.
 
Scroll down to the "Recycling" section and verify the value for "Private Memory Limit" is set to a value other than "0".
 
If the "Private Memory Limit" is set to a value of "0", this is a finding.</RawString>
      <Value>
      </Value>
    </Rule>
    <Rule id="V-100271" severity="medium" conversionstatus="pass" title="SRG-APP-000516-WSR-000174" dscresource="xWebAppPool">
      <Description>&lt;VulnDiscussion&gt;Application pools can be periodically recycled to avoid unstable states possibly leading to application crashes, hangs, or memory leaks.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>logEventOnRecycle</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Note: If the IIS Application Pool is hosting Microsoft SharePoint, this is Not Applicable.
 
If this IIS 10.0 installation is supporting Microsoft Exchange, and not otherwise hosting any content, this requirement is Not Applicable.
 
Open the IIS 10.0 Manager.
 
Perform the following for each Application Pool:
 
Click "Application Pools".
 
Highlight an Application Pool and click "Advanced Settings" in the "Action" Pane.
 
Scroll down to the "Recycling" section and expand the "Generate Recycle Event Log Entry" section.
 
Verify both the "Regular time interval" and "Specific time" options are set to "True".
 
If both the "Regular time interval" and "Specific time" options are not set to "True", this is a finding.</RawString>
      <Value>'Time,Schedule'</Value>
    </Rule>
    <Rule id="V-100273" severity="medium" conversionstatus="pass" title="SRG-APP-000516-WSR-000174" dscresource="xWebAppPool">
      <Description>&lt;VulnDiscussion&gt;Windows Process Activation Service (WAS) manages application pool configurations and may flag a worker process as unhealthy and shut it down. An application pool’s pinging monitor must be enabled to confirm worker processes are functional. A lack of response from the worker process might mean the worker process does not have a thread to respond to the ping request, or it is hanging for some other reason. The ping interval and ping response time may need adjustment to gain access to timely information about application pool health without triggering false, unhealthy conditions; for example, instability caused by an application.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>pingingEnabled</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Open the Internet Information Services (IIS) Manager.
 
Click "Application Pools".
 
Perform the following for each Application Pool:
 
Highlight an Application Pool to review and click "Advanced Settings" in the "Actions" pane.
 
Scroll down to the "Process Model" section and verify the value for "Ping Enabled" is set to "True".
 
If the value for "Ping Enabled" is not set to "True", this is a finding.</RawString>
      <Value>$true</Value>
    </Rule>
    <Rule id="V-100275" severity="medium" conversionstatus="pass" title="SRG-APP-000516-WSR-000174" dscresource="xWebAppPool">
      <Description>&lt;VulnDiscussion&gt;Rapid fail protection is a feature that interrogates the health of worker processes associated with websites and web applications. It can be configured to perform a number of actions such as shutting down and restarting worker processes that have reached failure thresholds. By not setting rapid fail protection, the web server could become unstable in the event of a worker process crash potentially leaving the web server unusable.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>rapidFailProtection</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Note: If the IIS Application Pool is hosting Microsoft SharePoint, this is Not Applicable.
 
If this IIS 10.0 installation is supporting Microsoft Exchange, and not otherwise hosting any content, this requirement is Not Applicable.
 
Open the IIS 10.0 Manager.
 
Click "Application Pools".
 
Perform the following for each Application Pool:
 
Highlight an Application Pool to review and click "Advanced Settings" in the "Actions" pane.
 
Scroll down to the "Rapid Fail Protection" section and verify the value for "Enabled" is set to "True".
 
If the "Rapid Fail Protection:Enabled" is not set to "True", this is a finding.</RawString>
      <Value>$true</Value>
    </Rule>
    <Rule id="V-100277" severity="medium" conversionstatus="pass" title="SRG-APP-000516-WSR-000174" dscresource="xWebAppPool">
      <Description>&lt;VulnDiscussion&gt;Windows Process Activation Service (WAS) manages application pool configuration and may flag a worker process as unhealthy and shut it down. The rapid fail protection must be set to a suitable value. A lack of response from the worker process might mean the worker process does not have a thread to respond to the ping request, or that it is hanging for some other reason. The ping interval and ping response time may need adjustment to gain access to timely information about application pool health without triggering false, unhealthy conditions.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>rapidFailProtectionInterval</Key>
      <OrganizationValueRequired>True</OrganizationValueRequired>
      <OrganizationValueTestString>[TimeSpan]{0} -le [TimeSpan]'00:05:00'</OrganizationValueTestString>
      <RawString>Note: If the IIS Application Pool is hosting Microsoft SharePoint, this is Not Applicable.
 
If this IIS 10.0 installation is supporting Microsoft Exchange, and not otherwise hosting any content, this requirement is Not Applicable.
 
Open the IIS 10.0 Manager.
 
Click "Application Pools".
 
Perform the following for each Application Pool:
 
Highlight an Application Pool to review and click "Advanced Settings" in the "Actions" pane.
 
Scroll down to the "Rapid Fail Protection" section and verify the value for "Failure Interval" is set to "5".
 
If the "Failure Interval" is not set to "5" or less, this is a finding.</RawString>
      <Value>
      </Value>
    </Rule>
  </WebAppPoolRule>
  <WebConfigurationPropertyRule dscresourcemodule="xWebAdministration">
    <Rule id="V-100191" severity="medium" conversionstatus="pass" title="SRG-APP-000001-WSR-000002" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.web/sessionState</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;When the session information is stored on the client, the session ID, along with the user authorization and identity information, is sent along with each client request and is either stored in a cookie, embedded in the uniform resource locator (URL), or placed in a hidden field on the displayed form. Each of these offers advantages and disadvantages. The biggest disadvantage to all three is the hijacking of a session along with all of the user's credentials.
 
When the user authorization and identity information is stored on the server in a protected and encrypted database, the communication between the client and web server will only send the session identifier, and the server can then retrieve user credentials for the session when needed. If, during transmission, the session were to be hijacked, the user's credentials would not be compromised.
 
ASP.NET provides a session state, which is available as the HttpSessionState class, as a method of storing session-specific information that is visible only within the session. ASP.NET session state identifies requests from the same browser during a limited time window as a session, and provides the ability to persist variable values for the duration of that session.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>mode</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name.
 
Under the "ASP.NET" section, select "Session State".
 
Under "Session State Mode Settings", verify the "In Process" mode is selected.
 
If the "Session State Mode Settings" is set to "In Process", this is not a finding.
 
Alternative method:
 
Click the site name.
 
Select "Configuration Editor" under the "Management" section.
 
From the "Section:" drop-down list at the top of the configuration editor, locate "system.web/sessionState".
 
Verify the "mode" reflects "InProc".
 
If the "mode" is not set to "InProc", this is a finding.
 
If the system being reviewed is part of a Web Farm, interview the System Administrator to ensure Session State Tracking is enabled via a SQL server, or other means. If Session State Tracking is enabled on the Web Farm, this is not a finding.</RawString>
      <Value>InProc</Value>
    </Rule>
    <Rule id="V-100193" severity="medium" conversionstatus="pass" title="SRG-APP-000001-WSR-000002" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.web/sessionState</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;When the session information is stored on the client, the session ID, along with the user authorization and identity information, is sent along with each client request and is stored in either a cookie, embedded in the uniform resource locator (URL), or placed in a hidden field on the displayed form. Each of these offers advantages and disadvantages. The biggest disadvantage to all three is the hijacking of a session along with all of the user's credentials.
 
When the user authorization and identity information is stored on the server in a protected and encrypted database, the communication between the client and website will only send the session identifier, and the server can then retrieve user credentials for the session when needed. If, during transmission, the session were to be hijacked, the user's credentials would not be compromised.
 
ASP.NET provides a session state, which is available as the HttpSessionState class, as a method of storing session-specific information visible only within the session. ASP.NET session state identifies requests from the same browser during a limited time window as a session and provides the ability to persist variable values for the duration of that session.
 
When using the URI mode for cookie settings under session state, IIS will reject and reissue session IDs that do not have active sessions. Configuring IIS to expire session IDs and regenerate tokens gives a potential attacker less time to capture a cookie and gain access to server content.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>cookieless</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
Open the IIS 10.0 Manager.
Click the site name.
Under the "ASP.NET" section, select "Session State".
Under "Cookie Settings", verify the "Use Cookies" mode is selected from the "Mode:" drop-down list.
If the "Use Cookies" mode is selected, this is not a finding.
 
Alternative method:
Click the site name.
Select "Configuration Editor" under the "Management" section.
From the "Section:" drop-down list at the top of the configuration editor, locate "system.web/sessionState".
Verify the "cookieless" is set to "UseCookies".
If the "cookieless" is not set to "UseCookies", this is a finding.
Note: If IIS 10.0 server/site is used only for system-to-system maintenance, does not allow users to connect to interface, and is restricted to specific system IPs, this is Not Applicable.</RawString>
      <Value>UseCookies</Value>
    </Rule>
    <Rule id="V-100223" severity="medium" conversionstatus="pass" title="SRG-APP-000224-WSR-000136" dscresource="None">
      <ConfigSection>/system.web/sessionState</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;Communication between a client and the web server is done using the HTTP protocol, but HTTP is a stateless protocol. To maintain a connection or session, a web server will generate a session identifier (ID) for each client session when the session is initiated. The session ID allows the web server to track a user session and, in many cases, the user, if the user previously logged into a hosted application.
 
By being able to guess session IDs, an attacker can easily perform a man-in-the-middle attack. To truly generate random session identifiers that cannot be reproduced, the web server session ID generator, when used twice with the same input criteria, must generate an unrelated random ID.
 
The session ID generator must be a FIPS 140-2-approved generator.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf>V-100191</DuplicateOf>
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>mode</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name.
 
Under the "ASP.NET" section, select "Session State".
 
Under "Session State" Mode Settings, verify the "In Process" mode is selected.
 
If the "In Process" mode is selected, this is not a finding.
 
Alternative method:
 
Click the site name.
 
Select "Configuration Editor" under the "Management" section.
 
From the "Section:" drop-down list at the top of the configuration editor, locate "system.web/sessionState".
 
Verify the "mode" reflects "InProc".
 
If the "mode" is not set to "InProc", this is a finding.
 
If the system being reviewed is part of a Web Farm, interview the System Administrator to ensure Session State Tracking is enabled via a SQL server, or other means. If Session State Tracking is enabled on the Web Farm, this is not a finding.</RawString>
      <Value>InProc</Value>
    </Rule>
    <Rule id="V-100227" severity="medium" conversionstatus="pass" title="SRG-APP-000246-WSR-000149" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.webServer/security/requestFiltering/requestlimits</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;Request filtering replaces URLScan in IIS, enabling administrators to create a more granular rule set with which to allow or reject inbound web content. By setting limits on web requests, it helps to ensure availability of web services and may also help mitigate the risk of buffer overflow type attacks. The MaxURL Request Filter limits the number of bytes the server will accept in a URL.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>maxUrl</Key>
      <OrganizationValueRequired>True</OrganizationValueRequired>
      <OrganizationValueTestString>{0} -le 4096</OrganizationValueTestString>
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click on the site name.
 
Double-click the "Request Filtering" icon.
 
Click "Edit Feature Settings" in the "Actions" pane.
 
If the "maxUrl" value is not set to "4096" or less, this is a finding.</RawString>
      <Value>
      </Value>
    </Rule>
    <Rule id="V-100229" severity="medium" conversionstatus="pass" title="SRG-APP-000246-WSR-000149" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.webServer/security/requestFiltering/requestlimits</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;By setting limits on web requests, it ensures availability of web services and mitigates the risk of buffer overflow type attacks. The maxAllowedContentLength Request Filter limits the number of bytes the server will accept in a request.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>maxAllowedContentLength</Key>
      <OrganizationValueRequired>True</OrganizationValueRequired>
      <OrganizationValueTestString>{0} -le 30000000</OrganizationValueTestString>
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click on the site name.
 
Double-click the "Request Filtering" icon.
 
Click "Edit Feature Settings" in the "Actions" pane.
 
If the "maxAllowedContentLength" value is not explicitly set to "30000000" or less or a length documented and approved by the ISSO, this is a finding.</RawString>
      <Value>
      </Value>
    </Rule>
    <Rule id="V-100231" severity="medium" conversionstatus="pass" title="SRG-APP-000246-WSR-000149" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.webServer/security/requestFiltering/requestlimits</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;Setting limits on web requests helps to ensure availability of web services and may also help mitigate the risk of buffer overflow type attacks. The Maximum Query String Request Filter describes the upper limit on allowable query string lengths. Upon exceeding the configured value, IIS will generate a Status Code 404.15.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>maxQueryString</Key>
      <OrganizationValueRequired>True</OrganizationValueRequired>
      <OrganizationValueTestString>{0} -le 2048</OrganizationValueTestString>
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name.
 
Double-click the "Request Filtering" icon.
 
Click “Edit Feature Settings” in the "Actions" pane.
 
If the "Maximum Query String" value is not set to "2048" or less, this is a finding.</RawString>
      <Value>
      </Value>
    </Rule>
    <Rule id="V-100233" severity="medium" conversionstatus="pass" title="SRG-APP-000246-WSR-000149" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.webServer/security/requestFiltering</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;Setting limits on web requests ensures availability of web services and mitigates the risk of buffer overflow type attacks. The allow high-bit characters Request Filter enables rejection of requests containing non-ASCII characters.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>allowHighBitCharacters</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name.
 
Double-click the "Request Filtering" icon.
 
Click "Edit Feature Settings" in the "Actions" pane.
 
If the "Allow high-bit characters" check box is checked, this is a finding.
 
Note: If this IIS 10.0 installation is supporting Microsoft Exchange, and not otherwise hosting any content, this requirement is Not Applicable.</RawString>
      <Value>false</Value>
    </Rule>
    <Rule id="V-100235" severity="medium" conversionstatus="pass" title="SRG-APP-000246-WSR-000149" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.webServer/security/requestFiltering</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;Request filtering enables administrators to create a more granular rule set with which to allow or reject inbound web content. Setting limits on web requests ensures availability of web services and mitigates the risk of buffer overflow type attacks. When the "Allow double escaping" option is disabled, it prevents attacks that rely on double-encoded requests.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>allowDoubleEscaping</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name.
 
Double-click the "Request Filtering" icon.
 
Click "Edit Feature Settings" in the "Actions" pane.
 
If the "Allow double escaping" check box is checked, this is a finding.</RawString>
      <Value>false</Value>
    </Rule>
    <Rule id="V-100237" severity="medium" conversionstatus="pass" title="SRG-APP-000246-WSR-000149" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.webServer/security/requestFiltering/fileExtensions</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;Request filtering enables administrators to create a more granular rule set to allow or reject inbound web content. Setting limits on web requests helps to ensure availability of web services and may also help mitigate the risk of buffer overflow type attacks. The allow unlisted property of the "File Extensions Request" filter enables rejection of requests containing specific file extensions not defined in the "File Extensions" filter. Tripping this filter will cause IIS to generate a Status Code 404.7.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>allowUnlisted</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name.
 
Double-click the "Request Filtering" icon.
 
Click "Edit Feature Settings" in the "Actions" pane.
 
If the "Allow unlisted file name extensions" check box is checked, this is a finding.
 
Note: If this IIS 10.0 installation is supporting Microsoft Exchange, and not otherwise hosting any content, this requirement is Not Applicable.</RawString>
      <Value>false</Value>
    </Rule>
    <Rule id="V-100239" severity="medium" conversionstatus="pass" title="SRG-APP-000251-WSR-000157" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.webServer/directoryBrowse</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;Directory browsing allows the contents of a directory to be displayed upon request from a web client. If directory browsing is enabled for a directory in IIS, users could receive a web page listing the contents of the directory. If directory browsing is enabled the risk of inadvertently disclosing sensitive content is increased.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>enabled</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Click the Site.
 
Double-click the "Directory Browsing" icon.
 
If "Directory Browsing" is not installed, this is Not Applicable.
 
Under the "Actions" pane, verify "Directory Browsing" is "Disabled".
 
If "Directory Browsing" is not "Disabled", this is a finding.</RawString>
      <Value>false</Value>
    </Rule>
    <Rule id="V-100241" severity="medium" conversionstatus="pass" title="SRG-APP-000266-WSR-000159" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.webServer/httpErrors</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;HTTP error pages contain information that could enable an attacker to gain access to an information system. Failure to prevent the sending of HTTP error pages with full information to remote requesters exposes internal configuration information to potential attackers.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>errormode</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name under review.
 
Double-click the "Error Pages" icon.
 
Click each error message and click "Edit Feature" setting from the "Actions" pane.
 
If any error message is not set to "Detailed errors for local requests and custom error pages for remote requests", this is a finding.</RawString>
      <Value>DetailedLocalOnly</Value>
    </Rule>
    <Rule id="V-100243" severity="medium" conversionstatus="pass" title="SRG-APP-000266-WSR-000160" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.web/compilation</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;Setting compilation debug to false ensures detailed error information does not inadvertently display during live application usage, mitigating the risk of application information being displayed to users.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>debug</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Note: If the ".NET feature" is not installed, this check is Not Applicable.
 
Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name under review.
 
Double-click ".NET Compilation".
 
Scroll down to the "Behavior" section and verify the value for "Debug" is set to "False".
 
If the "Debug" value is not set to "False", this is a finding.</RawString>
      <Value>false</Value>
    </Rule>
    <Rule id="V-100247" severity="medium" conversionstatus="pass" title="SRG-APP-000295-WSR-000134" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.web/sessionState</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;Leaving sessions open indefinitely is a major security risk. An attacker can easily use an already authenticated session to access the hosted application as the previously authenticated user. By closing sessions after a set period of inactivity, the web server can make certain that those sessions that are not closed through the user logging out of an application are eventually closed.
 
Acceptable values are 5 minutes for high-value applications, 10 minutes for medium-value applications, and 20 minutes for low-value applications.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>timeout</Key>
      <OrganizationValueRequired>True</OrganizationValueRequired>
      <OrganizationValueTestString>'{0}' -le '00:20:00'</OrganizationValueTestString>
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Click the site name.
 
Select "Configuration Editor" under the "Management" section.
 
From the "Section:" drop-down list at the top of the configuration editor, locate "system.web/sessionState".
 
Verify the "timeout" is set to "00:20:00 or less”, using the lowest value possible depending upon the application.
Acceptable values are 5 minutes for high-value applications, 10 minutes for medium-value applications, and 20 minutes for low-value applications.
 
If "timeout" is not set to "00:20:00 or less”, this is a finding.</RawString>
      <Value>
      </Value>
    </Rule>
    <Rule id="V-100259" severity="medium" conversionstatus="pass" title="SRG-APP-000439-WSR-000152" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.webServer/asp/session</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;The HTTP protocol is a stateless protocol. To maintain a session, a session identifier is used. The session identifier is a piece of data used to identify a session and a user. If the session identifier is compromised by an attacker, the session can be hijacked. By encrypting the session identifier, the identifier becomes more difficult for an attacker to hijack, decrypt, and use before the session has expired.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>keepSessionIdSecure</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Access the IIS 10.0 Manager.
 
Select the website being reviewed.
 
Under "Management" section, double-click the "Configuration Editor" icon.
 
From the "Section:" drop-down list, select "system.webServer/asp".
 
Expand the "session" section.
 
Verify the "keepSessionIdSecure" is set to "True".
 
If the "keepSessionIdSecure" is not set to "True", this is a finding.</RawString>
      <Value>True</Value>
    </Rule>
    <Rule id="V-100261.a" severity="medium" conversionstatus="pass" title="SRG-APP-000439-WSR-000154" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.web/httpCookies</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;A cookie can be read by client-side scripts easily if cookie properties are not set properly. By allowing cookies to be read by the client-side scripts, information such as session identifiers could be compromised and used by an attacker who intercepts the cookie. Setting cookie properties (i.e., HttpOnly property) to disallow client-side scripts from reading cookies better protects the information inside the cookie.
 
Satisfies: SRG-APP-000439-WSR-000154, SRG-APP-000439-SSR-000155, SRG-APP-000439-WSR-000153&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>requireSSL</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>From the "Section:" drop-down list, select "system.web/httpCookies".
Verify the "require SSL" is set to "True".</RawString>
      <Value>True</Value>
    </Rule>
    <Rule id="V-100261.b" severity="medium" conversionstatus="pass" title="SRG-APP-000439-WSR-000154" dscresource="xWebConfigKeyValue">
      <ConfigSection>/system.web/sessionState</ConfigSection>
      <Description>&lt;VulnDiscussion&gt;A cookie can be read by client-side scripts easily if cookie properties are not set properly. By allowing cookies to be read by the client-side scripts, information such as session identifiers could be compromised and used by an attacker who intercepts the cookie. Setting cookie properties (i.e., HttpOnly property) to disallow client-side scripts from reading cookies better protects the information inside the cookie.
 
Satisfies: SRG-APP-000439-WSR-000154, SRG-APP-000439-SSR-000155, SRG-APP-000439-WSR-000153&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Key>compressionEnabled</Key>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>From the "Section:" drop-down list, select "system.web/sessionState".
Verify the "compressionEnabled" is set to "False".</RawString>
      <Value>False</Value>
    </Rule>
  </WebConfigurationPropertyRule>
  <WindowsFeatureRule dscresourcemodule="PSDscResources">
    <Rule id="V-100213" severity="medium" conversionstatus="pass" title="SRG-APP-000141-WSR-000085" dscresource="WindowsFeature">
      <Description>&lt;VulnDiscussion&gt;A web server can be installed with functionality that by its nature is not secure. Web Distributed Authoring (WebDAV) is an extension to the HTTP protocol that, when developed, was meant to allow users to create, change, and move documents on a server, typically a web server or web share. Allowing this functionality, development, and deployment is much easier for web authors.
 
WebDAV is not widely used and has serious security concerns because it may allow clients to modify unauthorized files on the web server.&lt;/VulnDiscussion&gt;&lt;FalsePositives&gt;&lt;/FalsePositives&gt;&lt;FalseNegatives&gt;&lt;/FalseNegatives&gt;&lt;Documentable&gt;false&lt;/Documentable&gt;&lt;Mitigations&gt;&lt;/Mitigations&gt;&lt;SeverityOverrideGuidance&gt;&lt;/SeverityOverrideGuidance&gt;&lt;PotentialImpacts&gt;&lt;/PotentialImpacts&gt;&lt;ThirdPartyTools&gt;&lt;/ThirdPartyTools&gt;&lt;MitigationControl&gt;&lt;/MitigationControl&gt;&lt;Responsibility&gt;&lt;/Responsibility&gt;&lt;IAControls&gt;&lt;/IAControls&gt;</Description>
      <DuplicateOf />
      <Ensure>Absent</Ensure>
      <IsNullOrEmpty>False</IsNullOrEmpty>
      <Name>Web-DAV-Publishing</Name>
      <OrganizationValueRequired>False</OrganizationValueRequired>
      <OrganizationValueTestString />
      <RawString>Follow the procedures below for each site hosted on the IIS 10.0 web server:
 
Open the IIS 10.0 Manager.
 
Select the IIS 10.0 website.
 
Review the features listed under the "IIS" section.
 
If the "WebDAV Authoring Rules" icon exists, this is a finding.</RawString>
    </Rule>
  </WindowsFeatureRule>
</DISASTIG>