Dictionaries/Dict.Windows/Dict.Windows.psm1

<#
 
  ###### ####### ## ## ######## ## ## ######## ######## ########
 ## ## ## ## ### ### ## ## ## ## ## ## ## ##
 ## ## ## #### #### ## ## ## ## ## ## ## ##
 ## ## ## ## ### ## ######## ## ## ## ###### ########
 ## ## ## ## ## ## ## ## ## ## ## ##
 ## ## ## ## ## ## ## ## ## ## ## ## ##
  ###### ####### ## ## ## ####### ## ######## ## ##
 
#>


<#
.SYNOPSIS
Know if computer was booted using old legacy BIOS mode or new UEFI.
 
.DESCRIPTION
To make next boot efficient, we need to know in what mode the computer booted to this stage.
This function will tell us that.
If every tests fail, or if we can't determined the boot mode, it default to "BIOS" mode.
 
.EXAMPLE
$bootMode = Get-ComputerBootMode
 
.NOTES
General notes
#>

function Get-ComputerBootMode {
    [CmdletBinding()]
    [OutputType([String])]
    Param (
        # [Parameter(Mandatory = $true, ValueFromPipeLine = $true)][string]$string
    )
    Begin {
        Write-EnterFunction
    }

    Process {
        switch ($env:firmware_type) {
            'Legacy' {
                return "BIOS"
            }
            'UEFI' {
                return "UEFI"
            }
        }

        if ($null = Test-RegValueExist -RegPath 'HKLM:\System\CurrentControlSet\Control' -Name PEFirmwareType) {
            $value = Get-ItemPropertyValue 'HKLM:\System\CurrentControlSet\Control' -Name PEFirmwareType
            switch ($value) {
                1        { return "BIOS" }
                2        { return "UEFI" }
                default { return "BIOS" }
            }
        }

        return "BIOS"
    }

    End {
        Write-LeaveFunction
    }
}

<#
.SYNOPSIS
Configure computer to boot on user-asked partition
 
.DESCRIPTION
This function configure the boot flag on the correct partition
 
.PARAMETER Force
Force things
 
.PARAMETER Label
Label of the partition to configure
 
.PARAMETER Volume
Mountpoint of the target partition
 
.PARAMETER Disk
Disk device name of the partition
 
.PARAMETER PartNum
Partition number (can be several strings char since nvme disks. e.g. 'p1')
 
.PARAMETER Device
Full device adress like in '/dev/sda1'
 
.NOTES
General notes
#>

function Set-ComputerNextBootBIOS {
    [CmdletBinding()]
    [OutputType([Boolean])]
    Param (
        [switch]$Force,
        [Parameter(Mandatory = $true, ParameterSetName = 'LABEL')][string]$Label,
        [Alias('MountPoint', 'Letter', 'DriveLetter')]
        [Parameter(Mandatory = $true, ParameterSetName = 'VOLUME')][string]$Volume,
        [AllowNull]
        [Parameter(Mandatory = $false, ParameterSetName = 'DISKPART')][string]$Disk,
        [Parameter(Mandatory = $true, ParameterSetName = 'DISKPART')][string]$PartNum,
        [Parameter(Mandatory = $true, ParameterSetName = 'DEVICE')][string]$Device
        )
    Begin {
        Write-EnterFunction
    }

    Process {
        $diskNumber = -1
        $partNumber = -1
        switch ($PSCmdlet.ParameterSetName) {
            'LABEL' {
                $volume = Get-Volume -FileSystemLabel $Label
                $part = Get-Partition -Volume $volume
                $diskNumber = $part.DiskNumber
                $partNumber = $part.PartitionNumber
            }
            'VOLUME' {
                # we use $Volume[0] to get only the (1st) letter, stripping out the ':'
                $part = Get-Partition -DriveLetter $Volume[0]
                $diskNumber = $part.DiskNumber
                $partNumber = $part.PartitionNumber
            }
            'DISKPART' {
                $diskNumber = $Disk
                $partNumber = $PartNum
            }
            'Device' {
                eerror "-Device not supported on Windows."
            }
        }
        if ($diskNumber -lt 0) {
            eerror "Disk not found."
            return $false
        }
        if ($partNumber -lt 1) {
            eerror "Partition not found."
            return $false
        }

        $script = @"
select disk ${diskNumber}
select part ${partNumber}
active
"@

        $script | Out-File -FilePath "$TMP\nextboot.diskpart"
        Get-Content -Raw "$TMP\nextboot.diskpart" | ForEach-Object { edevel "$_" }
        $rc = Execute-Command -exe diskpart -args "/s $TMP\nextboot.diskpart"

        return $rc
    }

    End {
        Write-LeaveFunction
    }
}

<#
 
 ######## ### ###### ## ## ###### ###### ## ## ######## ######## ## ## ## ######## ########
    ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
    ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
    ## ## ## ###### ##### ###### ## ######### ###### ## ## ## ## ## ###### ########
    ## ######### ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
    ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ## ##
    ## ## ## ###### ## ## ###### ###### ## ## ######## ######## ####### ######## ######## ## ##
 
#>


<#
.SYNOPSIS
Create a new folder in the Operating System's task scheduler
 
.DESCRIPTION
Create a new folder in the Operating System's task scheduler daemon.
 
.PARAMETER FolderName
The name of the folder to create
 
.PARAMETER Root
An optional root folder to be the parent of the folder to create
 
.EXAMPLE
New-PwShFwScheduledTaskFolder -FolderName "MyDaemon"
 
.NOTES
On linux, this function just create an empty file under /etc/cron.d by default
#>

function New-PwShFwScheduledTaskFolder {
    [CmdletBinding()]
    [OutputType([Boolean])]
    [Alias('New-CronTaskFile')]
    Param (
        [Alias('Name')]
        [Parameter(Mandatory = $true, ValueFromPipeLine = $true)][string]$FolderName,
        [string]$Root = '\'
    )
    Begin {
        Write-EnterFunction
    }

    Process {
         $ErrorActionPreference = "stop"
        $scheduleObject = New-Object -ComObject schedule.service
        $scheduleObject.connect()
        $rootFolder = $scheduleObject.GetFolder($Root)
        Try {
           $null = $scheduleObject.GetFolder($FolderName)
        } Catch {
            $null = $rootFolder.CreateFolder($FolderName)
        } Finally {
            $ErrorActionPreference = "continue"
        }

        # test to return correct value
        Try {
            $null = $scheduleObject.GetFolder($FolderName)
            return $true
        } Catch {
            return $false
        }
    }

    End {
        Write-LeaveFunction
    }
}

<#
.SYNOPSIS
Create a new scheduled task / cron job
 
.DESCRIPTION
New-PwShFwScheduledTask function is a cross-platform wrapper for Scheduled Task / cron jobs.
It creates a full scheduled task / cron job within one command whatever the underlying OS is.
 
.PARAMETER Folder
Optional Folder name into which to create the task
 
.PARAMETER Name
Name of the task
 
.PARAMETER Command
Command or script to run
 
.PARAMETER Parameters
Arguments to pass to the command
 
.PARAMETER Description
Optional description of the task
 
.PARAMETER Username
Username to use to launch the task
 
.PARAMETER Minutes
Set the minutes number to trigger job (can be '*' to run every minutes).
Default = '*'
 
.PARAMETER Hour
Set the hour number to trigger job (can be '*' to run every hours).
Default = '*'
 
.PARAMETER DayOfMonth
Set the day of the month number to trigger job (can be '*' to run every days).
Default = '*'
 
.PARAMETER DayOWeek
Set the day of week number to trigger job (can be '*' to run every days of week).
Default = '*'
 
.PARAMETER Month
Set the month number to trigger job (can be '*' to run every months).
Default = '*'
 
.PARAMETER Year
Set the year number to trigger job (can be '*' to run every years).
Default = '*'
 
.PARAMETER EveryMinutes
Equals to -Minute '*'
 
.PARAMETER Hourly
Equals to -Minute 0 -Hours '*'
 
.PARAMETER Daily
Equals to -Minute 0 -Hours 0 -DayOfMonth '*'
 
.PARAMETER Weekly
Equals to -Minute 0 -Hours 0 -DayOfWeek 1 -Week '*'
 
.PARAMETER Monthly
Equals to -Minute 0 -Hours 0 -DayOfMonth 1 -Month '*'
 
.PARAMETER Yearly
Equals to -Minute 0 -Hours 0 -DayOfMonth 1 -Month 1 -Year '*'
 
.PARAMETER AtStartup
Trigger job on system startup
 
.PARAMETER AtLogon
Trigger job on session logon
 
.EXAMPLE
An example
 
.NOTES
General notes
#>

function New-PwShFwScheduledTask {
    [CmdletBinding(DefaultParameterSetName = 'EXACT_TRIGGER')]
    [OutputType([String])]
    Param (
        [string]$Folder = "\",
        [Parameter(Mandatory = $true, ValueFromPipeLine = $true)][string]$Name,
        [Parameter(Mandatory = $true, ValueFromPipeLine = $true)][string]$Command,
        [Parameter(Mandatory = $false, ValueFromPipeLine = $true)][string]$Parameters,
        [string]$Description = "",
        [string]$Username = $env:USERNAME,
        [Parameter(ParameterSetName = 'EXACT_TRIGGER')][string]$Minute = '*',
        [Parameter(ParameterSetName = 'EXACT_TRIGGER')][string]$Hour = '*',
        [Parameter(ParameterSetName = 'EXACT_TRIGGER')][string]$DayOfMonth = '*',
        [Parameter(ParameterSetName = 'EXACT_TRIGGER')][string]$DayOfWeek = '*',
        # [Parameter(ParameterSetName = 'EXACT_TRIGGER')][string]$Week = '*',
        [Parameter(ParameterSetName = 'EXACT_TRIGGER')][string]$Month = '*',
        [Parameter(ParameterSetName = 'EXACT_TRIGGER')][string]$Year = '*',
        [Parameter(ParameterSetName = 'ALIAS_TRIGGER')][switch]$EveryMinutes,
        [Parameter(ParameterSetName = 'ALIAS_TRIGGER')][switch]$Hourly,
        [Parameter(ParameterSetName = 'ALIAS_TRIGGER')][switch]$Daily,
        [Parameter(ParameterSetName = 'ALIAS_TRIGGER')][switch]$Weekly,
        [Parameter(ParameterSetName = 'ALIAS_TRIGGER')][switch]$Monthly,
        [Parameter(ParameterSetName = 'ALIAS_TRIGGER')][switch]$Yearly,
        [Parameter(ParameterSetName = 'ALIAS_TRIGGER')][switch]$AtStartup,
        [Parameter(ParameterSetName = 'ALIAS_TRIGGER')][switch]$AtLogon
    )
    Begin {
        Write-EnterFunction
    }

    Process {
        if ([string]::IsNullOrEmpty($Description)) { $Description = "$Name - $Command $Parameters" }
        $action = New-ScheduledTaskAction -Execute $Command -Argument $Parameters
        switch ($PSCmdlet.ParameterSetName) {
            'EXACT_TRIGGER' {
            }
            'ALIAS_TRIGGER' {
                if ($EveryMinutes)    { $trigger = New-ScheduledTaskTrigger -Once -At 0am -RepetitionInterval (New-TimeSpan -Seconds 60) -RepetitionDuration ([System.TimeSpan]::MaxValue) }
                if ($Hourly)        { $trigger = New-ScheduledTaskTrigger -Once -At 0am -RepetitionInterval (New-TimeSpan -Minutes 60) -RepetitionDuration ([System.TimeSpan]::MaxValue) }
                if ($Daily)            { $trigger = New-ScheduledTaskTrigger -Daily -At 0am }
                if ($Weekly)        { $trigger = New-ScheduledTaskTrigger -Weekly -DaysOfWeek $DayOfWeek -At 0am }
                if ($Monthly)        { $trigger = New-ScheduledTaskTrigger -Daily -DaysInterval 30 -At 0am }
                if ($Yearly)        { $trigger = New-ScheduledTaskTrigger -Daily -DaysInterval 365 -At 0am }
                if ($AtStartup)        { $trigger = New-ScheduledTaskTrigger -AtStartup }
                if ($AtLogon)        { $trigger = New-ScheduledTaskTrigger -AtLogon }
            }
        }
        try {
            $task = Register-ScheduledTask -TaskPath $Folder -TaskName $Name -User $Username -Description $Description -Action $action -Trigger $trigger
            $rc = $?
        } catch {
            eerror $_
            $rc = $false
        }
        return $rc
    }

    End {
        Write-LeaveFunction
    }
}

<#
 
 ######## ######## ###### #### ###### ######## ######## ## ##
 ## ## ## ## ## ## ## ## ## ## ## ## ##
 ## ## ## ## ## ## ## ## ## ####
 ######## ###### ## #### ## ###### ## ######## ##
 ## ## ## ## ## ## ## ## ## ## ##
 ## ## ## ## ## ## ## ## ## ## ## ##
 ## ## ######## ###### #### ###### ## ## ## ##
 
#>


<#
.SYNOPSIS
Mount a windows registry file
 
.DESCRIPTION
Mount a windows registry file like user.dat, SYSTEM or SOFTWARE from offline windows disk, or even BCD file.
Content of this registry is mounted under HKLM:\OFFLINE_<filename> registry key.
 
.PARAMETER File
Full path to a windows registry file. Must be used alone.
 
.PARAMETER Path
Full path to an offline windows installation folder. Must be used with -Hive parameter.
 
.PARAMETER Hive
Name of a windows hive. Currently, only SOFTWARE and SYSTEM are supported. Must be used with -Path parameter
 
.EXAMPLE
Mount-OfflineWindowsRegistry -Path E:\Windows -Hive SOFTWARE
This example will mount HKLM\SOFTWARE registry hive from an offline windows disk connected as E:
 
.EXAMPLE
Mount-OfflineWindowsRegistry -File E:\Users\<username>\user.dat
This example will mount a user profile from the same offline windows disk
 
.OUTPUTS
Registry path to where the registry file is mounted
 
.NOTES
General notes
#>


function Mount-OfflineWindowsRegistry {
    [CmdletBinding(
        DefaultParameterSetName="HIVE"
    )]Param(
        # Parameter help description
        [Parameter(ParameterSetName="FILENAME",ValueFromPipeLine = $true)]
        [ValidateScript({
            if(-Not ($_ | Test-Path) ){
                throw "File nout found."
            }
            if(-Not ($_ | Test-Path -PathType Leaf) ){
                throw "The File argument must be a filename."
            }
            return $true
        })][System.IO.FileInfo]$File = "X:\Windows\System32\config\SOFTWARE",

        [Parameter(ParameterSetName="HIVE",ValueFromPipeLine = $true)]
        [ValidateScript({
            if(-Not ($_ | Test-Path) ){
                throw "File or folder does not exist"
            }
            if(-Not ($_ | Test-Path -PathType Container) ){
                throw "The Path argument must be a Folder."
            }
            return $true
        })][System.IO.DirectoryInfo]$Path = "X:\Windows",
        [Parameter(ParameterSetName="HIVE")]
        [ValidateSet('SOFTWARE','SYSTEM')]
        [string]$Hive = "SOFTWARE"
    )
    Begin {
        Write-EnterFunction
    }

    Process {
        switch ($PSCmdlet.ParameterSetName) {
            "FILENAME" {
                $Hive = $File.BaseName
                $filename = $File.FullName
            }
            "HIVE" {
                $filename = $Path.FullName + "\System32\config\" + $Hive
            }
        }

        if (fileExist -Name $filename) {
            reg load HKLM\OFFLINE_$Hive $filename | out-null
        } else {
            Write-Error "Cannot find registry hive at $($Path.FullName)"
        }

        return "HKLM:\OFFLINE_$Hive"
    }

    End {
        Write-LeaveFunction
    }
}

<#
    .SYNOPSIS
    Template function
 
    .DESCRIPTION
    Skeleton of a typical function
 
    .PARAMETER $string
    a string
 
    .EXAMPLE
    New-TemplateFunction -string "a string"
 
#>

function DisMount-OfflineWindowsRegistry {
    [CmdletBinding()]Param (
        [string]$RegPath = ""
    )
    Begin {
        Write-EnterFunction
    }

    Process {
        $DosRegPath = $RegPath.Replace(':', '')
        eexec reg unload $DosRegPath
        return $?
    }

    End {
        Write-LeaveFunction
    }
}