QAModule

1.1.0

QAModule.psm1


###########Functions Required for the Pre-Check##############

Function Check-Prereq($enModPath)
{
     $i=0
     #$enModPath="D:\PowerShell\Pacjaging\QA_TOOL\Modules"
     #"C:\Users\"+$env:USERNAME+"\Documents\WindowsPowerShell\Modules"
  
        Write-Host "Testing HTML Module"
   
        if(Test-Path "$enModPath\PSWriteHTML")
            {
               Write-Host "Found the module in the local Path." 
              try
              {
                
                Import-Module "$enModPath\PSWriteHTML"
                Write-Host "HTML Module loaded successfully."
                $i++
            }
            catch
                {
                     Write-Host "Failed to load DLL files with error $($Error[0].Exception.Message)"
                    
                }
               
            }

        else
            {
                Write-Host "ERROR: HTML Module not present on the path $enModPath"
                
            }
       Write-Host "Testing Word Files"

       if(Test-Path "$enModPath\PSWriteWord"  )
            {
              try
                {
                    Write-Host "Found the Word Module "
                    Import-Module "$enModPath\PSWriteWord"
                    Write-Host  "Successfully loaded Word Module Files"
                    $i++
                }
                 catch
                {
                    Write-Host "Failed to load the Word Module Files with error $($Error[0].Exception.Message)"                 
                }
               
            }

        else
            {
               Write-Host "ERROR: Word Module not present on the path $enModPath"
                
            }#>
       <#if((Test-Path "$enModPath\Xceed.Document.NET.dll") -and (Test-Path "$enModPath\Xceed.Words.NET.dll") )
            {
              try
                {
                    Write-Host "Found DLL Files "
                    Add-Type -Path $enModPath\Xceed.Document.NET.dll
                    Add-Type -Path $enModPath\Xceed.Words.NET.dll
                    Write-Host "Successfully loaded DLL Files"
                    $i++
                }
                 catch
                {
                    Write-Host "Failed to load DLL files with error $($Error[0].Exception.Message)"
                }
                
            }
 
        else
            {
               Write-Host "ERROR: Word Module not present on the path $enModPath"
                 
            }#>
         Write-Host "Testing Custom Modules"
       if(Test-Path "$enModPath\CustomModule_V1.psm1" )
            {
              
             
             Write-Host "Found custom Module"
             try
                {
                    Import-Module "$enModPath\CustomModule_V1.psm1"
                    Write-Host "Custome Module loaded successfully "
                    $i++
                }
             catch
                {
                    Write-Host "Failed to load Custom module with error $($Error[0].Exception.Message)"
                    
                }

               
               
            }

        else
            {
                Write-Host "ERROR: Custom Module not present on the path $enModPath"
                
            }
   return $i   
  }
Function Get-FileName($initialDirectory,[ValidateSet('MSI','MST','CSV','DOCX')]$FileType)
{  
 [System.Reflection.Assembly]::LoadWithPartialName(“System.windows.forms”) |
 Out-Null
 if($FileType -eq "MSI")
    {
        $Filter="MSI(.msi)|*.msi"
    }
elseif($FileType -eq "MST"){
            $Filter="MST(.mst)|*.mst"
       }
    elseif($FileType -eq "csv"){
            $Filter="CSV(.csv)|*.csv"
       }
elseif($FileType -eq "docx")
    {
        $Filter="docx(.docx)|*.docx"
    }
 $OpenFileDialog = New-Object System.Windows.Forms.OpenFileDialog
 $OpenFileDialog.initialDirectory = $initialDirectory
 $OpenFileDialog.filter = $Filter
 $OpenFileDialog.ShowDialog() | Out-Null
 $OpenFileDialog.filename
}

Function Check-Readiness
    {
        

        $enModPath="C:\Users\"+$env:USERNAME+"\Documents\WindowsPowerShell\Modules"
        Write-Host "Testing HTML Module"
        $enModPath
        if(Test-Path "$enModPath\PSWriteHTML")
            {
                Write-Host "HTML Module present on the path. Importing"
                try
                    {
                        Import-Module "$enModPath\PSWriteHTML"
                        Write-Host "HTML Module Loaded Successfully"
                    }
                catch
                    {
                        Write-Host $Error[0]
                    }
               
            }
        else
            {
                Write-Host "HTML Module not present. Copy on the path: $enModPath"
                return
            }
         Write-Host "Testing Custom Module"
         
        if(Test-Path "$enModPath\CustomModule_V1.psm1")
            {
                Write-Host "Custom Module present on the path. Importing."
                try
                    {
                        Import-Module "$enModPath\CustomModule_V1.psm1"
                        Write-Host "Custom Module Loaded Successfully"
                    }
                catch
                    {
                        Write-Host $Error[0]
                    }
               
            }
        else
            {
                Write-Host "Custom Module not present. Copy on the path: $enModPath"
                return
            }
            
    }

Function Check-HTMLFolder
    {
        param ($ScriptPath)
        If(Test-Path "$ScriptPath\HTML")
            {
                Write-Host "HTML folder already Exist"
            }
        else
            {
                Write-Host "HTML folder do not Exist. Creating."
                New-Item -Path $ScriptPath -Name HTML -ItemType Directory -Force
            }
    }
Function Check-LogFolder
    {
        param ($ScriptPath)
        If(Test-Path "$ScriptPath\LOGS")
            {
                Write-Host "LOG folder already Exist"
            }
        else
            {
                Write-Host "LOG folder do not Exist. Creating."
                New-Item -Path $ScriptPath -Name LOGS -ItemType Directory -Force
            }
    }
###########Functions Required for the Pre-Check##############

############Function for Install/Uninstall##############
Function Load-ActionBox1
    {
# Load Windows Forms & Drawing classes.
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
[void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing") 

# Create base form.
$objForm = New-Object System.Windows.Forms.Form 
$objForm.Text = "Select Action"
$objForm.Size = New-Object System.Drawing.Size(300,170) 
$objForm.StartPosition = "CenterScreen"

# Configure keyboard intercepts for ESC & ENTER.
$objForm.KeyPreview = $True
$objForm.Add_KeyDown({
    if ($_.KeyCode -eq "Enter") 
    {
        $x=$objListBox.SelectedItem
        $objForm.Close()
    }
})
$objForm.Add_KeyDown({
    if ($_.KeyCode -eq "Escape") 
    {$objForm.Close()
    }
})

# Create OK button.
$OKButton = New-Object System.Windows.Forms.Button
$OKButton.Location = New-Object System.Drawing.Size(75,90)
$OKButton.Size = New-Object System.Drawing.Size(75,23)
$OKButton.Text = "OK"
$OKButton.Add_Click({$global:x=$objListBox.SelectedItem;$objForm.Close()})
#$OKButton.Add_Click({$x=$objListBox.SelectedItem;$objForm.Close()})
$objForm.Controls.Add($OKButton)

$CancelButton = New-Object System.Windows.Forms.Button
$CancelButton.Location = New-Object System.Drawing.Size(150,90)
$CancelButton.Size = New-Object System.Drawing.Size(75,23)
$CancelButton.Text = "Cancel"
$CancelButton.Add_Click({$objForm.Close()})
$objForm.Controls.Add($CancelButton)

$objLabel = New-Object System.Windows.Forms.Label
$objLabel.Location = New-Object System.Drawing.Size(10,20) 
$objLabel.Size = New-Object System.Drawing.Size(280,20) 
$objLabel.Text = "Please select an action:"
$objForm.Controls.Add($objLabel) 

$objListBox = New-Object System.Windows.Forms.ListBox 
$objListBox.Location = New-Object System.Drawing.Size(10,40) 
$objListBox.Size = New-Object System.Drawing.Size(260,20) 
$objListBox.Height = 50

[void] $objListBox.Items.Add("Install")
[void] $objListBox.Items.Add("Uninstall")


$objForm.Controls.Add($objListBox) 

# Force list box to display on top of other windows.
$objForm.TopMost = $true

$objForm.Add_Shown({$objForm.Activate()})
[void] $objForm.ShowDialog()
return $objListBox.SelectedItem
}
Function Check-InstallUninstall1
    {
        
        param($MainFolderPath)
        $INterPath= Split-Path $MainFolderPath
        $SorurceDirectory=Split-Path $INterPath
        if(Test-Path "$SorurceDirectory\Deploy-Application.exe")
            {
                Write-Host "Deploy-Application.exe found successfully"

            }
        else
            {
                Write-Host "Deploy-Application.exe was not found.Exiting"
                return
            }
        $ps1Files=Get-ChildItem $SorurceDirectory | where {$_.name -match ".ps1"} | select -ExpandProperty Name
        if($ps1Files.count -eq 1)
            {
                Write-Host "Ps1 file count is 1. Can proceed further"
            }
        else
            {
                Write-Host "Ps1 file count is more than one or no file present. Cannot proceed further"
                return
            }
        $Action=Load-ActionBox1
        if($Action -eq "Install")
            {
                cd $SorurceDirectory
                try
                {
                .\Deploy-Application.exe .\$ps1Files -DeploymentType 'Install' -DeployMode 'Silent'
                Write-Host "Successfully initiated the Installation of the Package"
                }
                catch
                {
                    Write-Host "Error in Installing"
                    Write-Host $Error[0].Exception.Message
                }

            }
        elseif($Action -eq "UnInstall")
            {
                cd $SorurceDirectory
                try
                {
               .\Deploy-Application.exe .\$ps1Files -DeploymentType 'Uninstall' -DeployMode 'Silent'
                Write-Host "Successfully initiated the Uninstalltion of the Package"
                }
                catch
                {
                    Write-Host "Error in Uninstalling"
                    Write-Host $Error[0].Exception.Message
                }

            }
        else
            {
                Write-Host "Wrong Action Selected"
            }
        

        
    }
############Function for Install/Uninstall##############

#####Additional Function##########
Function Write-Log
    {
        param([ValidateSet("ERROR","INFO","WARNING")]$LogType,
                $LogFilePath,$Content
        )
        $nl = "`r`n"
        $Log=(Get-Date -Format "dd/MM/yyyy hh:mm:ss")+" "+$LogType+":"+$Content+$nl
        
        Write-Host $Log
        $Log | Out-File -FilePath $LogFilePath -Append -Force -Encoding ascii 
    }
#####Additional Function##########
#####Used in Equated-Transform_8##########
Function Get-MSIProperties($Field,$MSIFile)
    {
        $fobj=@()
        $WindowsInstaller = New-Object -ComObject WindowsInstaller.Installer
        $MSIDatabase = $WindowsInstaller.GetType().InvokeMember('OpenDatabase', 'InvokeMethod', $Null, $WindowsInstaller, @($msifile, 0))
        $Query = "SELECT * FROM $Field"
        $View = $MSIDatabase.GetType().InvokeMember('OpenView', 'InvokeMethod', $null, $MSIDatabase, ($Query))
        $View.GetType().InvokeMember('Execute', 'InvokeMethod', $null, $View, $null)

        $hash = @{}
        $MSIResult = while ($Record = $View.GetType().InvokeMember('Fetch', 'InvokeMethod', $null, $View, $null)) 
            {
                $name = $Record.GetType().InvokeMember('StringData', 'GetProperty', $null, $Record, 1)
                $value = $hashMSIValue = $Record.GetType().InvokeMember('StringData', 'GetProperty', $null, $Record, 2)
                $obj=New-Object PSObject
                $obj | Add-Member -MemberType NoteProperty -Name DBTable -Value $Field
                $obj | Add-Member -MemberType NoteProperty -Name Name -Value $name
                $obj | Add-Member -MemberType NoteProperty -Name Value -Value $value
                $fobj += $obj  
                #$hash.Add($name,$value)
            
            }
       
        
        return $fobj
}
#####Used in Equated-Transform_8##########

#####Used in Equated-Transform_8##########
Function Apply-Transforms
    {
        Param($SourceMSI,$SourceMST,$DBTable,$Table1,$Table2)

        $fobj=@()
        $TempMSI = "$SourceMSI.tmp"
        $TempMST = "$SourceMST.tmp"

        Copy-Item $SourceMSI $TempMSI -Force
        Copy-Item $SourceMST $TempMST -Force

        $WindowsInstaller = New-Object -ComObject WindowsInstaller.Installer
        #Open the database in Direct read/write without Transaction (2)
        $MSIDatabase1 = $WindowsInstaller.GetType().InvokeMember('OpenDatabase' , 'InvokeMethod' , $Null, $WindowsInstaller, @($TempMSI, 2))
        $MSIDatabase1.GetType().InvokeMember('ApplyTransform' , 'InvokeMethod' , $Null , $MSIDatabase1 , @($TempMST, 0))
        $Query = ("SELECT * FROM $DBTable")

                #Opens a data view to the MSI based on the query created.
        $View = $MSIDatabase1.GetType().InvokeMember('OpenView', 'InvokeMethod', $null, $MSIDatabase1, ($Query))
        $null = $View.GetType().InvokeMember('Execute', 'InvokeMethod', $null, $View, $null)

        #$hash = @{}
        # Add File information (Note this adds the full File information Porperties so can call with <Var>.File |Select *
        #$hash.Add('File',$TempMSI)

        WHILE ($Record = $View.GetType().InvokeMember('Fetch', 'InvokeMethod', $null, $View, $null)) 
            {
                $name = $Record.GetType().InvokeMember('StringData', 'GetProperty', $null, $Record, $Table1)
                $value = $hashMSIValue = $Record.GetType().InvokeMember('StringData', 'GetProperty', $null, $Record, $Table2)
                $obj=New-Object PSObject
                $obj | Add-Member -MemberType NoteProperty -Name DBTable -Value $DBTable
                $obj | Add-Member -MemberType NoteProperty -Name Name -Value $name
                $obj | Add-Member -MemberType NoteProperty -Name Value -Value $value
                $fobj += $obj                      
                #$hash.Add($name,$value)
            }

        # Push Hash table into a PSCustom object
        #$msiProperties = [pscustomobject]$hash

        # I'm not sure If I have everything required to close out here properly from applying the transform.
        $null = $MSIDatabase1.GetType().InvokeMember('Commit' , 'InvokeMethod' , $Null , $MSIDatabase1 , $Null)
        $null = $view.GetType().InvokeMember('Close', 'InvokeMethod', $null, $view, $null)
        
        # Really important part to be able to release the opened files and delete
        $null = [Runtime.Interopservices.Marshal]::ReleaseComObject($view)
        $null = [Runtime.Interopservices.Marshal]::ReleaseComObject($MSIDatabase1)
        $null = [Runtime.Interopservices.Marshal]::ReleaseComObject($WindowsInstaller)

        [GC]::Collect()
        return $fobj
}
#####Used in Equated-Transform_8##########

#############Main Function################
Function Equated-Transforms_8
    {
        param($InputMSIFile,$InputMSTFile,$InWordFile)
        $finobj=@()
        $FinValObj=@()
        $obj=@()
        $ExpValues=get-ValueInnEw -wordDocPath $InWordFile      
        #$ExpValues
        if($InputMSTFile)
            {
                $PropTable=Apply-Transforms -SourceMSI $InputMSIFile -SourceMST $InputMSTFile -DBTable Property -Table1 1 -table2 2
       
                $RegTable=Apply-Transforms -SourceMSI $InputMSIFile -SourceMST $InputMSTFile -DBTable Registry -Table1 6 -table2 3
                $obj+=$PropTable
                $obj+=$RegTable
            }
        else
            {
                $PropTable=Get-MSIProperties -Field Property -MSIFile $InputMSIFile 
                $RegTable=Get-MSIProperties -Field Registry -MSIFile $InputMSIFile 
                $obj+=$PropTable
                $obj+=$RegTable
            }
                #$obj
                $AllUsers=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "Allusers"}
                if(!$AllUsers)
                    {
                         $AllUsers=New-Object Psobject
                       $AllUsers | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
                       $AllUsers | Add-Member -MemberType NoteProperty -Name Name -Value AllUsers
                       $AllUsers | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                       $finobj+=$AllUsers
                    }
       
                    else
                    {

                         $finobj+=$AllUsers
                    }
                $ARPNOREPAIR=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "ARPNOREPAIR"}
                if(!$ARPNOREPAIR)
                    {
                         $ARPNOREPAIR=New-Object Psobject
                       $ARPNOREPAIR | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
                       $ARPNOREPAIR | Add-Member -MemberType NoteProperty -Name Name -Value ARPNOREPAIR
                       $ARPNOREPAIR | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                        $finobj+=$ARPNOREPAIR
                    }
       
                else
                {

                    $finobj+=$ARPNOREPAIR
                }
            $ARPNOMODIFY=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "ARPNOMODIFY"}
            if(!$ARPNOMODIFY)
                {
                     $ARPNOMODIFY=New-Object Psobject
                   $ARPNOMODIFY | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
                   $ARPNOMODIFY | Add-Member -MemberType NoteProperty -Name Name -Value ARPNOMODIFY
                   $ARPNOMODIFY | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                    $finobj+=$ARPNOMODIFY
                }
            else
                {

                   $finobj+=$ARPNOMODIFY
                }
        
        $ARPNOREMOVE=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "ARPNOREMOVE"}
        if(!$ARPNOREMOVE)
            {
                 $ARPNOREMOVE=New-Object Psobject
               $ARPNOREMOVE | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
               $ARPNOREMOVE | Add-Member -MemberType NoteProperty -Name Name -Value ARPNOREMOVE
               $ARPNOREMOVE | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                $finobj+=$ARPNOREMOVE
            }
      
        else
            {

                $finobj+=$ARPNOREMOVE
            }
        $USERNAME=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "USERNAME"}
        if(!$USERNAME)
            {
                 $USERNAME=New-Object Psobject
               $USERNAME | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
               $USERNAME | Add-Member -MemberType NoteProperty -Name Name -Value USERNAME
               $USERNAME | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                $finobj+=$USERNAME
            }
       
        else
            {

                 $finobj+=$USERNAME
            }
        $ProductLanguage=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "ProductLanguage"}
        if(!$ProductLanguage)
            {
                 $ProductLanguage=New-Object Psobject
               $ProductLanguage | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
               $ProductLanguage | Add-Member -MemberType NoteProperty -Name Name -Value ProductLanguage
               $ProductLanguage | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                $finobj+=$ProductLanguage
            }
        else
            {

                 $finobj+=$ProductLanguage
            }
      
        $REBOOT=$obj | where{$_.DBTable -match "Property" -and $_.Name -eq "REBOOT"}
        if(!$REBOOT)
            {
                 $REBOOT=New-Object Psobject
               $REBOOT | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
               $REBOOT | Add-Member -MemberType NoteProperty -Name Name -Value REBOOT
               $REBOOT | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                $finobj+=$REBOOT
            }
        
        else
            {

                $finobj+=$REBOOT
            }
        $ROOTDRIVE=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "ROOTDRIVE"}
        if(!$ROOTDRIVE)
            {
                 $ROOTDRIVE=New-Object Psobject
               $ROOTDRIVE | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
               $ROOTDRIVE | Add-Member -MemberType NoteProperty -Name Name -Value ROOTDRIVE
               $ROOTDRIVE | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                $finobj+=$ROOTDRIVE
            }
        else
            {

                $finobj+=$ROOTDRIVE
            }
        
        $Author=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "Author"}
        if(!$Author)
            {
                $Author=New-Object Psobject
               $Author | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
               $Author | Add-Member -MemberType NoteProperty -Name Name -Value Author
               $Author | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                $finobj+=$Author
            }
        else
            {

                $finobj+=$Author
            }
        
        $Manufacturer=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "Manufacturer"}
        if(!$Manufacturer)
            {
                 $Manufacturer=New-Object Psobject
               $Manufacturer | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
               $Manufacturer | Add-Member -MemberType NoteProperty -Name Name -Value Manufacturer
               $Manufacturer | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                $finobj+=$Manufacturer
            }
         else
            {

                 $finobj+=$Manufacturer
            }
      
        $ProductName=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "ProductName"}
        if(!$ProductName)
            {
                 $ProductName=New-Object Psobject
               $ProductName | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
               $ProductName | Add-Member -MemberType NoteProperty -Name Name -Value ProductName
               $ProductName | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                $finobj+=$ProductName
            }
        else
            {

               $finobj+=$ProductName
            }
        
        $ProductVersion=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "ProductVersion"}
        if(!$ProductVersion)
            {
                 $ProductVersion=New-Object Psobject
               $ProductVersion | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
               $ProductVersion | Add-Member -MemberType NoteProperty -Name Name -Value ProductVersion
               $ProductVersion | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                $finobj+=$ProductVersion
            }
        else
            {

                 $finobj+=$ProductVersion
            }
       
        

        $ProductCode=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "ProductCode"}
        if(!$ProductCode)
            {
                 $ProductCode=New-Object Psobject
               $ProductCode | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
               $ProductCode | Add-Member -MemberType NoteProperty -Name Name -Value ProductCode
               $ProductCode | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                $finobj+=$ProductCode
            }
        else
            {

                $finobj+=$ProductCode
            }
        

        $UpgradeCode=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "UpgradeCode"}
        if(!$UpgradeCode)
            {
                 $UpgradeCode=New-Object Psobject
               $UpgradeCode | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
               $UpgradeCode | Add-Member -MemberType NoteProperty -Name Name -Value UpgradeCode
               $UpgradeCode | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                $finobj+=$UpgradeCode
            }
        else
            {

                $finobj+=$UpgradeCode
            }
        $FJREF=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "FJREF"}
        if(!$FJREF)
            {
               $FJREF=New-Object Psobject
               $FJREF | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
               $FJREF | Add-Member -MemberType NoteProperty -Name Name -Value FJREF
               $FJREF | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                $finobj+=$FJREF
            }
            else
                {
                    $finobj+=$FJREF
                }

        $PackageCode=$obj | where{$_.DBTable -match "Property" -and $_.Name -match "PackageCode"}
        if(!$PackageCode)
            {
               $PackageCode=New-Object Psobject
               $PackageCode | Add-Member -MemberType NoteProperty -Name DBTable -Value Property
               $PackageCode | Add-Member -MemberType NoteProperty -Name Name -Value PackageCode
               $PackageCode | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
                $finobj+=$PackageCode
            }
        else
        {
            $finobj+=$PackageCode
        }
        $objAK=$obj | where{$_.DBTable -match "Registry" -and $_.Name -eq "Audit_Key"}
        if(!$objAK)
            {
               $objAK=New-Object Psobject
               $objAK | Add-Member -MemberType NoteProperty -Name DBTable -Value Registry
               $objAK | Add-Member -MemberType NoteProperty -Name Name -Value Audit_key
               $objAK | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
               $finobj+=$objAK
            }
        else
            {
                $finobj+=$objAK
            }
        $objInstallDIR=$obj | where{$_.DBTable -match "Registry" -and $_.Name -eq "INSTALLDIR"}
        if(!$objInstallDIR)
            {
               $objInstallDIR=New-Object Psobject
               $objInstallDIR | Add-Member -MemberType NoteProperty -Name DBTable -Value Registry
               $objInstallDIR | Add-Member -MemberType NoteProperty -Name Name -Value INSTALLDIR
               $objInstallDIR | Add-Member -MemberType NoteProperty -Name Value -Value "Not Found"
               $finobj+=$objInstallDIR
            }
        else
            {
                $finobj+=$objInstallDIR
            }

            #$finobj
            
        foreach($ExpValue in $ExpValues)
            {
               $ExpectedValue=$ExpValue.value

               $CurrentValue=$finobj | where{$_.Name -eq $ExpValue.Property} | select -ExpandProperty Value
          
               #$CurrentValue
                if($ExpectedValue -eq $CurrentValue)
                    {
                        
                        $OutObj=New-Object PSObject 
                        $OutObj | Add-Member -MemberType NoteProperty -Name Property -Value $ExpValue.Property
                        $OutObj | Add-Member -MemberType NoteProperty -Name Current_Value -Value $CurrentValue
                        $OutObj | Add-Member -MemberType NoteProperty -Name Expected_Value -Value $ExpectedValue
                        $OutObj | Add-Member -MemberType NoteProperty -Name Match_Status -Value Matched
                        $FinValObj += $OutObj
                    }
                Else
                    {
                        
                         $OutObj=New-Object PSObject 
                        $OutObj | Add-Member -MemberType NoteProperty -Name Property -Value $ExpValue.Property
                        $OutObj | Add-Member -MemberType NoteProperty -Name Current_Value -Value $CurrentValue
                        $OutObj | Add-Member -MemberType NoteProperty -Name Expected_Value -Value $ExpectedValue
                        $OutObj | Add-Member -MemberType NoteProperty -Name Match_Status -Value "Not Matched"
                        $FinValObj += $OutObj
                    }
               
            }
    return $FinValObj

    }
#############Main Function################
    
#####Used in Equated-Transform_8##########



function get-ValueIntheBox($formTitle, $textTitle,$wordDocPath)
    {

        $global:AllValues=@()

        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ALLUSERS"; Value="1"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOREPAIR"; Value="1"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOMODIFY"; Value="1"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOREMOVE"; Value="1"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="USERNAME"; Value="Authorised User"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ProductLanguage"; Value="1033"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="REBOOT"; Value="ReallySuppress"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ROOTDRIVE"; Value="C:\"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ALLUSERS"; Value="1"}



        $ValuesFromWord=Extract-FromWord $wordDocPath
        
        $manuFacturer=($ValuesFromWord | where{$_.Property -match "Application Vendor"}  | select -ExpandProperty Value)
        $val=($ValuesFromWord | where{$_.Property -eq "Detection Method"} | select -ExpandProperty Value).Split("`r`n")[1]
        $productName=($ValuesFromWord | where{$_.Property -match "Application Name"}  | select -ExpandProperty Value)
        $Version=($ValuesFromWord | where{$_.Property -match "Application Version"}  | select -ExpandProperty Value)
        $PackageName=($ValuesFromWord | where{$_.Property -match "Package Name"}  | select -ExpandProperty Value)
        $fjref=($ValuesFromWord | where{$_.Property -match "APS Reference"}  | select -ExpandProperty Value)
        $tempKey=($ValuesFromWord | where{$_.Property -match "Detection Method "}  | select -ExpandProperty Value)
        $AuditKey=($ValuesFromWord | where{$_.Property -eq "Detection Method"} | select -ExpandProperty Value).Split("`r`n")[0]
        $AuditKey=$AuditKey+"\"+$val.Replace("Value: ","")
        $ProdCode=($ValuesFromWord | where{$_.Property -match "Product Code"}  | select -ExpandProperty Value)
        $installPath=$ValuesFromWord | where{$_.Property -match "Installation Path"}  | select -ExpandProperty Value
        $RegVal=$ValuesFromWord | where{$_.Property -match "RegVal"}  | select -ExpandProperty Value
      
        [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing") 
        [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms") 

        $objForm = New-Object System.Windows.Forms.Form
        $objForm.Text = $formTitle
        $objForm.Size = New-Object System.Drawing.Size(300,450)
        $objForm.StartPosition = "CenterScreen"
        $objForm.AutoSize=$True
        $objForm.AutoScale=$True

        $objForm.KeyPreview = $True
        $objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter") {$x=$objTextBox.Text;$objForm.Close()}})
        $objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape") {$objForm.Close()}})

        $OKButton = New-Object System.Windows.Forms.Button
        $OKButton.Location = New-Object System.Drawing.Size(75,370)
        $OKButton.Size = New-Object System.Drawing.Size(75,23)
        $OKButton.Text = "OK"
        $OKButton.Add_Click({$Script:userInput=$objTextBox.Text;$objForm.Close()})
        $objForm.Controls.Add($OKButton)

        $CANCELButton = New-Object System.Windows.Forms.Button
        $CANCELButton.Location = New-Object System.Drawing.Size(150,370)
        $CANCELButton.Size = New-Object System.Drawing.Size(75,23)
        $CANCELButton.Text = "CANCEL"
        $CANCELButton.Add_Click({$objForm.Close()})
        $objForm.Controls.Add($CANCELButton)



        $objTextBox = New-Object System.Windows.Forms.TextBox
        $objTextBox.Location = New-Object System.Drawing.Size(120,50)
        $objTextBox.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox.Text=$env:USERNAME
        $objTextBox.AutoSize=$True
        $objForm.Controls.Add($objTextBox)
    

        $objTextBox1 = New-Object System.Windows.Forms.TextBox
        $objTextBox1.Location = New-Object System.Drawing.Size(120,80)
        $objTextBox1.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox1.Text=$manuFacturer
        $objTextBox1.AutoSize=$True
    
        $objForm.Controls.Add($objTextBox1)

        $objTextBox2 = New-Object System.Windows.Forms.TextBox
        $objTextBox2.Location = New-Object System.Drawing.Size(120,110)
        $objTextBox2.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox2.AutoSize=$True
        $objTextBox2.Text=$productName
        $objForm.Controls.Add($objTextBox2)

        $objTextBox3 = New-Object System.Windows.Forms.TextBox
        $objTextBox3.Location = New-Object System.Drawing.Size(120,140)
        $objTextBox3.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox3.AutoSize=$True
        $objTextBox3.Text=$Version
        $objForm.Controls.Add($objTextBox3)

        $objTextBox4 = New-Object System.Windows.Forms.TextBox
        $objTextBox4.Location = New-Object System.Drawing.Size(120,170)
        $objTextBox4.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox4.AutoSize=$True
        $objTextBox4.Text=$ProdCode
        $objForm.Controls.Add($objTextBox4)

        $objTextBox5 = New-Object System.Windows.Forms.TextBox
        $objTextBox5.Location = New-Object System.Drawing.Size(120,200)
        $objTextBox5.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox5.AutoSize=$True
        $objForm.Controls.Add($objTextBox5)

        $objTextBox6 = New-Object System.Windows.Forms.TextBox
        $objTextBox6.Location = New-Object System.Drawing.Size(120,230)
        $objTextBox6.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox6.AutoSize=$True
        $objTextBox6.Text=$fjref
        $objForm.Controls.Add($objTextBox6)

        $objTextBox7 = New-Object System.Windows.Forms.TextBox
        $objTextBox7.Location = New-Object System.Drawing.Size(120,260)
        $objTextBox7.AutoSize=$True
        $objTextBox7.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox7.Text=$RegVal
        $objForm.Controls.Add($objTextBox7)

        $objTextBox8 = New-Object System.Windows.Forms.TextBox
        $objTextBox8.Location = New-Object System.Drawing.Size(120,290)
        $objTextBox8.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox8.AutoSize=$True
        $objTextBox8.Text=$installPath
        $objForm.Controls.Add($objTextBox8)

        $objTextBox9 = New-Object System.Windows.Forms.TextBox
        $objTextBox9.Location = New-Object System.Drawing.Size(120,320)
        $objTextBox9.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox9.AutoSize=$True
        $objTextBox9.Text=$AuditKey
        $objForm.Controls.Add($objTextBox9)



        $objLabelMain = New-Object System.Windows.Forms.Label
        $objLabelMain.Location = New-Object System.Drawing.Size(180,20)
        $objLabelMain.Size = New-Object System.Drawing.Size(280,30)
        $objLabelMain.Text = "Validate Input"
        $objForm.Controls.Add($objLabelMain)

        $objLabel = New-Object System.Windows.Forms.Label
        $objLabel.Location = New-Object System.Drawing.Size(20,50)
        $objLabel.Size = New-Object System.Drawing.Size(280,30)
        $objLabel.Text = "Engineer Name"
        $objForm.Controls.Add($objLabel)

        $objLabel1 = New-Object System.Windows.Forms.Label
        $objLabel1.Location = New-Object System.Drawing.Size(20,80)
        $objLabel1.Size = New-Object System.Drawing.Size(280,30)
        $objLabel1.Text = "Manufacturer"
        $objForm.Controls.Add($objLabel1)

        $objLabel2 = New-Object System.Windows.Forms.Label
        $objLabel2.Location = New-Object System.Drawing.Size(20,110)
        $objLabel2.Size = New-Object System.Drawing.Size(280,30)
        $objLabel2.Text = "ProductName"
        $objForm.Controls.Add($objLabel2)

        $objLabel3 = New-Object System.Windows.Forms.Label
        $objLabel3.Location = New-Object System.Drawing.Size(20,140)
        $objLabel3.Size = New-Object System.Drawing.Size(280,30)
        $objLabel3.Text = "ProductVersion"
        $objForm.Controls.Add($objLabel3)

        $objLabel4 = New-Object System.Windows.Forms.Label
        $objLabel4.Location = New-Object System.Drawing.Size(20,170)
        $objLabel4.Size = New-Object System.Drawing.Size(280,30)
        $objLabel4.Text = "ProductCode"
        $objForm.Controls.Add($objLabel4)

        $objLabel5 = New-Object System.Windows.Forms.Label
        $objLabel5.Location = New-Object System.Drawing.Size(20,200)
        $objLabel5.Size = New-Object System.Drawing.Size(280,30)
        $objLabel5.Text = "UpgradeCode"
        $objForm.Controls.Add($objLabel5)

        $objLabel6 = New-Object System.Windows.Forms.Label
        $objLabel6.Location = New-Object System.Drawing.Size(20,230)
        $objLabel6.Size = New-Object System.Drawing.Size(280,30)
        $objLabel6.Text = "FJREF"
        $objForm.Controls.Add($objLabel6)

        $objLabel7 = New-Object System.Windows.Forms.Label
        $objLabel7.Location = New-Object System.Drawing.Size(20,260)
        $objLabel7.Size = New-Object System.Drawing.Size(280,30)
        $objLabel7.Text = "Package Code"
        $objForm.Controls.Add($objLabel7)

        $objLabel8 = New-Object System.Windows.Forms.Label
        $objLabel8.Location = New-Object System.Drawing.Size(20,290)
        $objLabel8.Size = New-Object System.Drawing.Size(280,30)
        $objLabel8.Text = "INSTALLDIR"
        $objForm.Controls.Add($objLabel8)

        $objLabel9 = New-Object System.Windows.Forms.Label
        $objLabel9.Location = New-Object System.Drawing.Size(20,320)
        $objLabel9.Size = New-Object System.Drawing.Size(280,30)
        $objLabel9.Text = "Audit_Key"
        $objForm.Controls.Add($objLabel9)

        $objForm.Topmost = $True

        $OKButton.add_click({

        $global:AllValues += New-Object -TypeName psobject -Property @{Property="Author"; Value="Fujitsu - $($objTextBox.Text)"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$($objLabel1.Text); Value=$($objTextBox1.Text)}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel2.Text; Value=$objTextBox2.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel3.Text; Value=$objTextBox3.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel4.Text; Value=$objTextBox4.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel5.Text; Value=$objTextBox5.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel6.Text; Value=$objTextBox6.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel7.Text; Value=$objTextBox7.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel8.Text; Value=$objTextBox8.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel9.Text; Value=$objTextBox9.Text}
        
       
    })

    $objForm.Add_Shown({$objForm.Activate()})



    [void] $objForm.ShowDialog()
    return $global:AllValues
    
}

#####Used in Equated-Transform_8##########

#############used in get-ValueIn#############

Function Get-DataFromWord($DocFilePath)
    {
        $fin=@()
        if(Test-Path $DocFilePath)
        {
            Write-Host "Path $DocFilePath exist"
        }
        else
        {
            Write-Host "Path $DocFilePath not exist"
        }
        $cusobj=New-Object PSObject
        $TempTXTFile=(Split-Path $DocFilePath)+"\TempTXT.txt"
        if(Test-Path $TempTXTFile -ErrorAction SilentlyContinue)
            {
                Remove-Item $TempTXTFile -Force
            }
        if(Get-Process -name WINWORD -ErrorAction SilentlyContinue)
            {
                Stop-Process -Name WINWORD -ErrorAction SilentlyContinue -Force
            }
        $WordDocument = [Xceed.Words.NET.DocX]::Load($DocFilePath)
        
        $WordDocument | Out-File $TempTXTFile
       
        $allcontent=Get-Content $TempTXTFile


       

        $PackageName=(((Get-Content $TempTXTFile | where{$_ -match "Package Name"})| select -First 1).Replace("Package Name ","")).trim()
        #(Get-Content $TempTXTFile | where{$_ -match "Package Name"}).Replace("Package Name ","").Replace(" <w:t>Package Name</w:t>","").Trim()
        $ProdCode=(((Get-Content $TempTXTFile | where{$_ -match "Product Code"})| select -First 1).Replace("Product Code ","")).trim()
        #$ProdCode=(Get-Content $TempTXTFile | where{$_ -match "Product Code"}).Replace("Product Code ","").Replace("<w:t>Product Code</w:t>","").Trim()
        $ApplicationVendor=(((Get-Content $TempTXTFile | where{$_ -match "Application Vendor"}).Replace("Application Vendor ","").Trim() | select -First 1).split("(")[0]).trim()
        $ApplicationName=(((Get-Content $TempTXTFile | where{$_ -match "Application Name"}).Replace("Application Name ","").Trim() | select -First 1).split("(")[0]).trim()
        $Version=(((Get-Content $TempTXTFile | where{$_ -match "Application Version"}).Replace("Application Version ","").Trim() | select -First 1).split("(")[0]).trim()
        $APSReference=(((Get-Content $TempTXTFile | where{$_ -match "APS Reference"}).Replace("APS Reference ","").Trim() | select -First 1).split("(")[0]).trim()
        $InstallationPath=(((Get-Content $TempTXTFile | where{$_ -match "Installation Path"}).Replace("Installation Path ","").Trim() | select -First 1)).trim()
        $a=Get-Content $TempTXTFile
        for($i=0;$i -le $a.Count;$i++)
            {
                if($a[$i] -match "Detection" -and ($a[$i] -match "HKLM" -or $a[$i] -match  "HKEY_LOCAL_MACHINE") )
                    {
                        
                        $AuditKey=($a[$i+1] -replace ".*[:]","").Trim()
                       
               
                    }
        
                if($a[$i] -match "Detection" )
                    {
                        if($a[$i+1]  -match "HKLM" -or $a[$i+1] -match  "HKEY_LOCAL_MACHINE")
                        {
               
                        $AuditKey=($a[$i+1] -replace ".*[:]","").Trim()
                
               
                       }
                    }
        
            }
 
        $AuditKey
        $RegVal
         $cusobj=New-Object PSObject
        $cusobj | Add-Member -MemberType NoteProperty -Name Property -Value PackageName
        $cusobj | Add-Member -MemberType NoteProperty -Name Value -Value $PackageName
        $fin += $cusobj

        $cusobj1=New-Object PSObject
        $cusobj1 | Add-Member -MemberType NoteProperty -Name Property -Value ProdCode
        $cusobj1 | Add-Member -MemberType NoteProperty -Name Value -Value $ProdCode
        $fin += $cusobj1

        $cusobj2=New-Object PSObject
        $cusobj2 | Add-Member -MemberType NoteProperty -Name Property -Value ApplicationVendor
        $cusobj2 | Add-Member -MemberType NoteProperty -Name Value -Value $ApplicationVendor
        $fin += $cusobj2

        $cusobj3=New-Object PSObject
        $cusobj3 | Add-Member -MemberType NoteProperty -Name Property -Value ApplicationName
        $cusobj3 | Add-Member -MemberType NoteProperty -Name Value -Value $ApplicationName
        $fin += $cusobj3

        $cusobj4=New-Object PSObject
        $cusobj4 | Add-Member -MemberType NoteProperty -Name Property -Value Version
        $cusobj4 | Add-Member -MemberType NoteProperty -Name Value -Value $Version
        $fin += $cusobj4

        $cusobj5=New-Object PSObject
        $cusobj5 | Add-Member -MemberType NoteProperty -Name Property -Value APSReference
        $cusobj5 | Add-Member -MemberType NoteProperty -Name Value -Value $APSReference
        $fin += $cusobj5

        $cusobj6=New-Object PSObject
        $cusobj6 | Add-Member -MemberType NoteProperty -Name Property -Value AuditKey
        $cusobj6 | Add-Member -MemberType NoteProperty -Name Value -Value $AuditKey
        $fin += $cusobj6

        $cusobj7=New-Object PSObject
        $cusobj7 | Add-Member -MemberType NoteProperty -Name Property -Value RegVal
        $cusobj7 | Add-Member -MemberType NoteProperty -Name Value -Value $RegVal
        $fin += $cusobj7
         
          $cusobj8=New-Object PSObject
        $cusobj8 | Add-Member -MemberType NoteProperty -Name Property -Value INSTALLDIR
        $cusobj8 | Add-Member -MemberType NoteProperty -Name Value -Value $InstallationPath
        $fin += $cusobj8
        return $fin
       
        
    }
Function Get-DataFromWordNew
    {
    Param($WordDocPath)
    $word=Get-WordDocument -FilePath $WordDocPath 
    $fin=@()
    $tempFile="C:\Windows\Temp\tempTxt.txt"
    if(Test-Path $tempFile)
        {
            Remove-Item $tempFile -Force
        }
    Get-WordParagraphs -WordDocument $word | Out-File $tempFile -Append -Force
    $a=Get-Content $tempFile | where{$_ -match "Text : "}
    $a
    for($i=0;$i -le $a.Count;$i++)
        {
            if($a[$i] -eq "Text : Package Name")
                {
                
                    $PackageName=$a[$i+1]
                    $PackageName=$PackageName.Replace("Text : ","").Trim()

                }
            if($a[$i] -eq "Text : Product Code")
                {
                    $Prodcode=$a[$i+1]
                    $Prodcode=$Prodcode.Replace("Text : ","").Trim()

                }
            if($a[$i] -eq "Text : Application Vendor")
                {
                    $ApplicationVendor=$a[$i+1]
                    $ApplicationVendor=$ApplicationVendor.Replace("Text : ","").Trim()
                
                     if($fin.Property -match "ApplicationVendor")
                        {
                        
                        }
                    else
                        {
                            $cusobj2=New-Object PSObject
                            $cusobj2 | Add-Member -MemberType NoteProperty -Name Property -Value ApplicationVendor
                            $cusobj2 | Add-Member -MemberType NoteProperty -Name Value -Value $ApplicationVendor
                            $fin += $cusobj2
                        }

                }
             if($a[$i] -eq "Text : Application Name")
                {
                    $ApplicationName=$a[$i+1]
                    $ApplicationName=$ApplicationName.Replace("Text : ","").Trim()
                     if($fin.Property -match "ApplicationName")
                        {
                        
                        }
                    else
                        {
                            $cusobj3=New-Object PSObject
                            $cusobj3 | Add-Member -MemberType NoteProperty -Name Property -Value ApplicationName
                            $cusobj3 | Add-Member -MemberType NoteProperty -Name Value -Value $ApplicationName
                            $fin += $cusobj3
                        }
                    

                }
         
            if($a[$i] -eq "Text : Packaged By")
                {
                    $Packager=$a[$i+1]
                    $Packager=$Packager.Replace("Text : ","").Trim()

                }
            if($a[$i] -eq "Text : Quality Assured By")
                {
                
                   
                    $QAAss=$a[$i+1]
                    $QAAss=$QAAss.Replace("Text : ","").Trim()

                }
            if($a[$i] -eq "Text : Application Version")
                {
                
                   
                    $Version=$a[$i+1]
                    $Version=$Version.Replace("Text : ","").Trim()
                    if($fin.Property -match "Version")
                        {
                        
                        }
                    else
                        {
                              $cusobj4=New-Object PSObject
                                $cusobj4 | Add-Member -MemberType NoteProperty -Name Property -Value Version
                                $cusobj4 | Add-Member -MemberType NoteProperty -Name Value -Value $Version
                                $fin += $cusobj4

                        }



                }
        
        
        if($a[$i] -eq "Text : Installation Path")
            {
                $InstallationPath=$a[$i+1]
                $InstallationPath=$InstallationPath.Replace("Text : ","").Trim()

            }
        if($a[$i] -eq "Text : APS Reference")
            {
                $APSReference=$a[$i+1]
                $APSReference=$APSReference.Replace("Text : ","").Trim()

            }
         if($a[$i] -eq "Text : Detection Method")
            {
                $AuditKey=$a[$i+1]
                $AuditKey=$AuditKey.Replace("Text : ","").Trim().Replace("Key: ","")

            }

     
        
    }
    $cusobj=New-Object PSObject
        $cusobj | Add-Member -MemberType NoteProperty -Name Property -Value PackageName
        $cusobj | Add-Member -MemberType NoteProperty -Name Value -Value $PackageName
        $fin += $cusobj

        $cusobj1=New-Object PSObject
        $cusobj1 | Add-Member -MemberType NoteProperty -Name Property -Value ProdCode
        $cusobj1 | Add-Member -MemberType NoteProperty -Name Value -Value $ProdCode
        $fin += $cusobj1

        

     

      
        $cusobj5=New-Object PSObject
        $cusobj5 | Add-Member -MemberType NoteProperty -Name Property -Value APSReference
        $cusobj5 | Add-Member -MemberType NoteProperty -Name Value -Value $APSReference
        $fin += $cusobj5

        $cusobj6=New-Object PSObject
        $cusobj6 | Add-Member -MemberType NoteProperty -Name Property -Value AuditKey
        $cusobj6 | Add-Member -MemberType NoteProperty -Name Value -Value $AuditKey
        $fin += $cusobj6

        
         
        $cusobj8=New-Object PSObject
        $cusobj8 | Add-Member -MemberType NoteProperty -Name Property -Value INSTALLDIR
        $cusobj8 | Add-Member -MemberType NoteProperty -Name Value -Value $InstallationPath
        $fin += $cusobj8
        return $fin
     }    


#############used in get-ValueIn#############
##########################

###############Functions that can be discarded if not required############
<#
Function Install-Prereq
    {
 
        $enModPath="D:\PowerShell\Pacjaging\QA_TOOL\Modules"
        $precheck=Check-Prereq -enModPath $enModPath
         
        if($precheck -eq 3)
            {
                "All modules present"
            }
        else
            {
               $wshell = New-Object -ComObject Wscript.Shell
 
                $pop=$wshell.Popup("There are Missing Modules. Please copy and rerun.",0,"Install Module",0x1)
                
            }
    }
 
Function Import-CustomModules
    {
        param($SourcePath)
 
        $enModPath="C:\Users\"+$env:USERNAME+"\Documents\WindowsPowerShell\Modules"
        Write-Host "Testing HTML Module"
        if(Test-Path "$SourcePath\PSWriteHTML")
            {
                Write-Host "Already Present HTML Module"
                Import-Module "$SourcePath\PSWriteHTML"
                Write-Host "HTML Module Loaded Successfully"
                
            }
        else
            {
                Copy-Item "$SourcePath\CustomModule_V1.psm1" -Destination $enModPath -Force -Recurse
                         try
                            {
                                Import-Module "$SourcePath\PSWriteHTML"
                                Write-Host "HTML Module Loaded Successfully"
                            }
                        catch
                            {
                                Write-Host "Failed to load HTML Module"
                                $Error[0]
                            }
            }
         Write-Host "Testing Custom Module"
         if(Test-Path "$SourcePath\CustomModule_V1.psm1")
            {
                Write-Host "Already Present Custom Module"
                Import-Module "$SourcePath\CustomModule_V1.psm1"
                Write-Host "Custom Module Loaded Successfully"
            }
        Else
            {
                try
                    {
                        Copy-Item "$SourcePath\CustomModule_V1.psm1" -Destination $enModPath -Force -Recurse
                         try
                            {
                                Import-Module "$SourcePath\CustomModule_V1.psm1"
                                Write-Host "Custom Module Loaded Successfully"
                            }
                        catch
                            {
                                Write-Host "Failed to load Custom Module"
                                $Error[0]
                            }
 
                    }
                catch
                    {
                        Write-Host $Error[0]
                    }
            }
    }
Function Compare-Transforms
    {
        param($ExpectedCSVFile,$InputMSIFile,$InputMSTFile)
        $finobj=@()
        $obj=@()
        $ExpValues=Import-Csv $ExpectedCSVFile
        #$A=Get-MSIProperties -Field Property -MSIFile $InputMSIFile
    
        $PropTable=Apply-Transforms -SourceMSI $InputMSIFile -SourceMST $InputMSTFile -DBTable Property -Table1 1 -table2 2
        $RegTable=Apply-Transforms -SourceMSI $InputMSIFile -SourceMST $InputMSTFile -DBTable Registry -Table1 6 -table2 3
        $obj+=$PropTable
        $obj+=$RegTable
         
         
        foreach($1obj in $obj)
            {
               $Prop=$1obj.Name
               $CurPropVal=$1obj.Value
               $ExpValues = Import-Csv $ExpectedCSVFile | where{$_.Property -eq $Prop}
               if($ExpValues)
                {
                    if($CurPropVal -eq $ExpValues.Value)
                        {
                            $properties = [ordered]@{
                                                  Property = $Prop
                                                  ExpectedValue = $ExpValues.value
                                                  CurrentValue = $CurPropVal
                                                  Match_Status = "Matched"
                                              
                                                    }
                            $obj=New-Object PSObject -Property $properties
           
                            $finobj+=$obj
                        }
                    else
                        {
                            $properties = [ordered]@{
                                                  Property = $Prop
                                                  ExpectedValue = $ExpValues.value
                                                  CurrentValue = $CurPropVal
                                                  Match_Status = "Not Matched"
                                              
                                            }
                            $obj=New-Object PSObject -Property $properties
           
                            $finobj+=$obj
                        }
                    }
                 
            }
        return $finobj
    }
Function Compare-Transform
    {
        param($ExpectedCSVFile,$InputMSIFile,$InputMSTFile,$DBTable)
        $finobj=@()
        $ExpValues=Import-Csv $ExpectedCSVFile
        #$A=Get-MSIProperties -Field Property -MSIFile $InputMSIFile
        $a=Apply-Transform -SourceMSI $InputMSIFile -SourceMST $InputMSTFile -DBTable Property
         
        foreach($ExpValue in $ExpValues)
        {
            $Curval=$a.($ExpValue.Property)
            if($Curval -eq $expValue.value)
                {
                      $properties = [ordered]@{
                                                  Property = $ExpValue.Property
                                                  ExpectedValue = $ExpValue.value
                                                  CurrentValue = $Curval
                                                  Match_Status = "Matched"
                                              
                                            }
                    $obj=New-Object PSObject -Property $properties
           
                    $finobj+=$obj
                }
            Else
                {
                 $properties = [ordered]@{
                                              Property = $ExpValue.Property
                                              ExpectedValue = $ExpValue.value
                                              CurrentValue = $Curval
                                              Match_Status = "Not Matched"
                                              
                                        }
                $obj=New-Object PSObject -Property $properties
                $finobj+=$obj
            }
     
        }
        return $finobj
    }
Function Equated-Transforms
    {
        param($InputMSIFile,$InputMSTFile)
        $finobj=@()
        $obj=@()
        $ExpValues=getValue
             
        
    
        $PropTable=Apply-Transforms -SourceMSI $InputMSIFile -SourceMST $InputMSTFile -DBTable Property -Table1 1 -table2 2
        $RegTable=Apply-Transforms -SourceMSI $InputMSIFile -SourceMST $InputMSTFile -DBTable Registry -Table1 6 -table2 3
        $obj+=$PropTable
        $obj+=$RegTable
        #$obj
         
        foreach($ExpValue in $ExpValues)
            {
                #$ExpValue.Property
                $curVal=$obj | where{$_.Name -match $ExpValue.Property} | select -ExpandProperty Value
                $ExpVal=$ExpValue.Value
                $Prop=$ExpValue.Property
                 
 
 
                if($ExpVal -eq $curVal)
                    {
                        $OutObj=New-Object PSObject
                        $OutObj | Add-Member -MemberType NoteProperty -Name Property -Value $Prop
                        $OutObj | Add-Member -MemberType NoteProperty -Name Current_Value -Value $curVal
                        $OutObj | Add-Member -MemberType NoteProperty -Name Expected_Value -Value $ExpVal
                        $OutObj | Add-Member -MemberType NoteProperty -Name Match_Status -Value Matched
                        $finobj += $OutObj
 
                    }
                else
                    {
                        $OutObj=New-Object PSObject
                        $OutObj | Add-Member -MemberType NoteProperty -Name Property -Value $Prop
                        $OutObj | Add-Member -MemberType NoteProperty -Name Current_Value -Value $curVal
                        $OutObj | Add-Member -MemberType NoteProperty -Name Expected_Value -Value $ExpVal
                        $OutObj | Add-Member -MemberType NoteProperty -Name Match_Status -Value "Not Matched"
                        $finobj += $OutObj
                    }
            }
       return $finobj
         
    }
 
Function Apply-Transform
    {
    Param($SourceMSI,$SourceMST,$DBTable)
 
 
    $TempMSI = "$SourceMSI.tmp"
    $TempMST = "$SourceMST.tmp"
 
    Copy-Item $SourceMSI $TempMSI -Force
    Copy-Item $SourceMST $TempMST -Force
 
    $WindowsInstaller = New-Object -ComObject WindowsInstaller.Installer
#Open the database in Direct read/write without Transaction (2)
    $MSIDatabase1 = $WindowsInstaller.GetType().InvokeMember('OpenDatabase' , 'InvokeMethod' , $Null, $WindowsInstaller, @($TempMSI, 2))
    $MSIDatabase1.GetType().InvokeMember('ApplyTransform' , 'InvokeMethod' , $Null , $MSIDatabase1 , @($TempMST, 0))
    $Query = ("SELECT * FROM $DBTable")
 
            #Opens a data view to the MSI based on the query created.
    $View = $MSIDatabase1.GetType().InvokeMember('OpenView', 'InvokeMethod', $null, $MSIDatabase1, ($Query))
    $null = $View.GetType().InvokeMember('Execute', 'InvokeMethod', $null, $View, $null)
 
                        $hash = @{}
            # Add File information (Note this adds the full File information Porperties so can call with <Var>.File |Select *
    $hash.Add('File',$TempMSI)
 
    WHILE ($Record = $View.GetType().InvokeMember('Fetch', 'InvokeMethod', $null, $View, $null))
        {
            $name = $Record.GetType().InvokeMember('StringData', 'GetProperty', $null, $Record, 1)
            $value = $hashMSIValue = $Record.GetType().InvokeMember('StringData', 'GetProperty', $null, $Record, 2)
            $hash.Add($name,$value)
        }
 
# Push Hash table into a PSCustom object
    $msiProperties = [pscustomobject]$hash
 
# I'm not sure If I have everything required to close out here properly from applying the transform.
    $null = $MSIDatabase1.GetType().InvokeMember('Commit' , 'InvokeMethod' , $Null , $MSIDatabase1 , $Null)
    $null = $view.GetType().InvokeMember('Close', 'InvokeMethod', $null, $view, $null)
         
# Really important part to be able to release the opened files and delete
    $null = [Runtime.Interopservices.Marshal]::ReleaseComObject($view)
    $null = [Runtime.Interopservices.Marshal]::ReleaseComObject($MSIDatabase1)
    $null = [Runtime.Interopservices.Marshal]::ReleaseComObject($WindowsInstaller)
 
    [GC]::Collect()
    return $hash
}
function getValue($formTitle, $textTitle){
 
$global:AllValues=@()
 
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ALLUSERS"; Value="1"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOREPAIR"; Value="1"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOMODIFY"; Value="1"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOREMOVE"; Value="1"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="USERNAME"; Value="Authorised User"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ProductLanguage"; Value="1033"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="REBOOT"; Value="ReallySuppress"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ROOTDRIVE"; Value="C:\"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ALLUSERS"; Value="1"}
 
 
 
 
 
 
    [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
    [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
 
    $objForm = New-Object System.Windows.Forms.Form
    $objForm.Text = $formTitle
    $objForm.Size = New-Object System.Drawing.Size(300,450)
    $objForm.StartPosition = "CenterScreen"
 
    $objForm.KeyPreview = $True
    $objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter") {$x=$objTextBox.Text;$objForm.Close()}})
    $objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape") {$objForm.Close()}})
 
    $OKButton = New-Object System.Windows.Forms.Button
    $OKButton.Location = New-Object System.Drawing.Size(75,370)
    $OKButton.Size = New-Object System.Drawing.Size(75,23)
    $OKButton.Text = "OK"
    $OKButton.Add_Click({$Script:userInput=$objTextBox.Text;$objForm.Close()})
    $objForm.Controls.Add($OKButton)
 
    $CANCELButton = New-Object System.Windows.Forms.Button
    $CANCELButton.Location = New-Object System.Drawing.Size(150,370)
    $CANCELButton.Size = New-Object System.Drawing.Size(75,23)
    $CANCELButton.Text = "CANCEL"
    $CANCELButton.Add_Click({$objForm.Close()})
    $objForm.Controls.Add($CANCELButton)
 
 
 
    $objTextBox = New-Object System.Windows.Forms.TextBox
    $objTextBox.Location = New-Object System.Drawing.Size(120,50)
    $objTextBox.Size = New-Object System.Drawing.Size(160,20)
    $objTextBox.Text=$env:USERNAME
    $objForm.Controls.Add($objTextBox)
     
 
    $objTextBox1 = New-Object System.Windows.Forms.TextBox
    $objTextBox1.Location = New-Object System.Drawing.Size(120,80)
    $objTextBox1.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox1)
 
    $objTextBox2 = New-Object System.Windows.Forms.TextBox
    $objTextBox2.Location = New-Object System.Drawing.Size(120,110)
    $objTextBox2.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox2)
 
    $objTextBox3 = New-Object System.Windows.Forms.TextBox
    $objTextBox3.Location = New-Object System.Drawing.Size(120,140)
    $objTextBox3.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox3)
 
    $objTextBox4 = New-Object System.Windows.Forms.TextBox
    $objTextBox4.Location = New-Object System.Drawing.Size(120,170)
    $objTextBox4.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox4)
 
    $objTextBox5 = New-Object System.Windows.Forms.TextBox
    $objTextBox5.Location = New-Object System.Drawing.Size(120,200)
    $objTextBox5.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox5)
 
    $objTextBox6 = New-Object System.Windows.Forms.TextBox
    $objTextBox6.Location = New-Object System.Drawing.Size(120,230)
    $objTextBox6.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox6)
 
    $objTextBox7 = New-Object System.Windows.Forms.TextBox
    $objTextBox7.Location = New-Object System.Drawing.Size(120,260)
    $objTextBox7.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox7)
 
    $objTextBox8 = New-Object System.Windows.Forms.TextBox
    $objTextBox8.Location = New-Object System.Drawing.Size(120,290)
    $objTextBox8.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox8)
 
    $objTextBox9 = New-Object System.Windows.Forms.TextBox
    $objTextBox9.Location = New-Object System.Drawing.Size(120,320)
    $objTextBox9.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox9)
 
 
 
    $objLabelMain = New-Object System.Windows.Forms.Label
    $objLabelMain.Location = New-Object System.Drawing.Size(100,20)
    $objLabelMain.Size = New-Object System.Drawing.Size(280,30)
    $objLabelMain.Text = "Enter your Input"
    $objForm.Controls.Add($objLabelMain)
 
    $objLabel = New-Object System.Windows.Forms.Label
    $objLabel.Location = New-Object System.Drawing.Size(20,50)
    $objLabel.Size = New-Object System.Drawing.Size(280,30)
    $objLabel.Text = "Engineer Name"
    $objForm.Controls.Add($objLabel)
 
    $objLabel1 = New-Object System.Windows.Forms.Label
    $objLabel1.Location = New-Object System.Drawing.Size(20,80)
    $objLabel1.Size = New-Object System.Drawing.Size(280,30)
    $objLabel1.Text = "Manufacturer"
    $objForm.Controls.Add($objLabel1)
 
    $objLabel2 = New-Object System.Windows.Forms.Label
    $objLabel2.Location = New-Object System.Drawing.Size(20,110)
    $objLabel2.Size = New-Object System.Drawing.Size(280,30)
    $objLabel2.Text = "Product Name"
    $objForm.Controls.Add($objLabel2)
 
    $objLabel3 = New-Object System.Windows.Forms.Label
    $objLabel3.Location = New-Object System.Drawing.Size(20,140)
    $objLabel3.Size = New-Object System.Drawing.Size(280,30)
    $objLabel3.Text = "Version"
    $objForm.Controls.Add($objLabel3)
 
    $objLabel4 = New-Object System.Windows.Forms.Label
    $objLabel4.Location = New-Object System.Drawing.Size(20,170)
    $objLabel4.Size = New-Object System.Drawing.Size(280,30)
    $objLabel4.Text = "ProductCode"
    $objForm.Controls.Add($objLabel4)
 
    $objLabel5 = New-Object System.Windows.Forms.Label
    $objLabel5.Location = New-Object System.Drawing.Size(20,200)
    $objLabel5.Size = New-Object System.Drawing.Size(280,30)
    $objLabel5.Text = "UpgradeCode"
    $objForm.Controls.Add($objLabel5)
 
    $objLabel6 = New-Object System.Windows.Forms.Label
    $objLabel6.Location = New-Object System.Drawing.Size(20,230)
    $objLabel6.Size = New-Object System.Drawing.Size(280,30)
    $objLabel6.Text = "FJREF"
    $objForm.Controls.Add($objLabel6)
 
     $objLabel7 = New-Object System.Windows.Forms.Label
    $objLabel7.Location = New-Object System.Drawing.Size(20,260)
    $objLabel7.Size = New-Object System.Drawing.Size(280,30)
    $objLabel7.Text = "Company"
    $objForm.Controls.Add($objLabel7)
 
    $objLabel8 = New-Object System.Windows.Forms.Label
    $objLabel8.Location = New-Object System.Drawing.Size(20,290)
    $objLabel8.Size = New-Object System.Drawing.Size(280,30)
    $objLabel8.Text = "INSTALLDIR"
    $objForm.Controls.Add($objLabel8)
 
    $objLabel9 = New-Object System.Windows.Forms.Label
    $objLabel9.Location = New-Object System.Drawing.Size(20,320)
    $objLabel9.Size = New-Object System.Drawing.Size(280,30)
    $objLabel9.Text = "Audit Key"
    $objForm.Controls.Add($objLabel9)
 
    $objForm.Topmost = $True
 
    $OKButton.add_click({
 
       $global:AllValues += New-Object -TypeName psobject -Property @{Property="Author"; Value="Fujitsu - $($objTextBox.Text)"}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$($objLabel1.Text); Value=$($objTextBox2.Text)}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel2.Text; Value=$objTextBox2.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel3.Text; Value=$objTextBox3.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel4.Text; Value=$objTextBox4.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel5.Text; Value=$objTextBox5.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel6.Text; Value=$objTextBox6.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel7.Text; Value=$objTextBox7.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel8.Text; Value=$objTextBox8.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel9.Text; Value=$objTextBox9.Text}
         
        
    })
 
    $objForm.Add_Shown({$objForm.Activate()})
 
 
 
    [void] $objForm.ShowDialog()
    return $global:AllValues
     
}
Function Equated-Transforms
    {
        param($InputMSIFile,$InputMSTFile)
        $finobj=@()
        $obj=@()
        $ExpValues=getValue
             
        
    
        $PropTable=Apply-Transforms -SourceMSI $InputMSIFile -SourceMST $InputMSTFile -DBTable Property -Table1 1 -table2 2
        $RegTable=Apply-Transforms -SourceMSI $InputMSIFile -SourceMST $InputMSTFile -DBTable Registry -Table1 6 -table2 3
        $obj+=$PropTable
        $obj+=$RegTable
        #$obj
         
        foreach($ExpValue in $ExpValues)
            {
                #$ExpValue.Property
                $curVal=$obj | where{$_.Name -match $ExpValue.Property} | select -ExpandProperty Value
                $ExpVal=$ExpValue.Value
                $Prop=$ExpValue.Property
                 
 
 
                if($ExpVal -eq $curVal)
                    {
                        $OutObj=New-Object PSObject
                        $OutObj | Add-Member -MemberType NoteProperty -Name Property -Value $Prop
                        $OutObj | Add-Member -MemberType NoteProperty -Name Current_Value -Value $curVal
                        $OutObj | Add-Member -MemberType NoteProperty -Name Expected_Value -Value $ExpVal
                        $OutObj | Add-Member -MemberType NoteProperty -Name Match_Status -Value Matched
                        $finobj += $OutObj
 
                    }
                else
                    {
                        $OutObj=New-Object PSObject
                        $OutObj | Add-Member -MemberType NoteProperty -Name Property -Value $Prop
                        $OutObj | Add-Member -MemberType NoteProperty -Name Current_Value -Value $curVal
                        $OutObj | Add-Member -MemberType NoteProperty -Name Expected_Value -Value $ExpVal
                        $OutObj | Add-Member -MemberType NoteProperty -Name Match_Status -Value "Not Matched"
                        $finobj += $OutObj
                    }
            }
       return $finobj
         
    }
Function Get-DetailsFromWord1($DocumentPath)
{
    if(Get-Process -Name WINWORD -ErrorAction SilentlyContinue)
        {
        Stop-Process -Name WINWORD -Force
        }
    $CusObj=New-Object PSObject
    $finObj=@()
    $word = New-Object -ComObject Word.application
    $document = $word.Documents.Open($documentPath)
    $word.Visible=$false
    #$document.Tables | Get-Member
 
    $Vendor = $document.Tables[4].Cell(1,2).range.text
 
    $Appname = $document.Tables[4].Cell(2,2).range.text
 
    $Version =$document.Tables[4].Cell(3,2).range.text
 
    $PKGRef =$document.Tables[3].Cell(1,2).range.text
    $Packagname =$document.Tables[11].Cell(2,2).range.text
    $Packagname
     
    $document.close()
    $CusObj | Add-Member -MemberType NoteProperty -Name Name -Value Vendor
    $CusObj | Add-Member -MemberType NoteProperty -Name Value -Value $Vendor
    $finObj += $CusObj
 
    $CusObj1=New-Object PSObject
    $CusObj1 | Add-Member -MemberType NoteProperty -Name Name -Value AppName
    $CusObj1 | Add-Member -MemberType NoteProperty -Name Value -Value $Appname
    $finObj += $CusObj1
 
    $CusObj2=New-Object PSObject
    $CusObj2 | Add-Member -MemberType NoteProperty -Name Name -Value Version
    $CusObj2 | Add-Member -MemberType NoteProperty -Name Value -Value $Version
    $finObj += $CusObj2
 
    $CusObj3=New-Object PSObject
    $CusObj3 | Add-Member -MemberType NoteProperty -Name Name -Value PKGRef
    $CusObj3 | Add-Member -MemberType NoteProperty -Name Value -Value $PKGRef
    $finObj += $CusObj3
 
    $CusObj4=New-Object PSObject
    $CusObj4 | Add-Member -MemberType NoteProperty -Name Name -Value Packagname
    $CusObj4 | Add-Member -MemberType NoteProperty -Name Value -Value $Packagname
    $finObj += $CusObj4
 
 
 
    $word.Quit()
    return $finObj
}
 
 
 
 
Function Compare-CurrentandExpected
    {
        param($ExpectedCSVFile,$InputMSIFile)
        $finobj=@()
        $ExpValues=Import-Csv $ExpectedCSVFile
        $A=Get-MSIProperties -Field Property -MSIFile $InputMSIFile
         
        foreach($ExpValue in $ExpValues)
        {
            $Curval=$a.($ExpValue.Property)
            if($Curval -eq $expValue.value)
                {
                      $properties = [ordered]@{
                                                  Property = $ExpValue.Property
                                                  ExpectedValue = $ExpValue.value
                                                  CurrentValue = $Curval
                                                  Match_Status = "Matched"
                                              
                                            }
                    $obj=New-Object PSObject -Property $properties
           
                    $finobj+=$obj
                }
            Else
                {
                 $properties = [ordered]@{
                                              Property = $ExpValue.Property
                                              ExpectedValue = $ExpValue.value
                                              CurrentValue = $Curval
                                              Match_Status = "Not Matched"
                                              
                                        }
                $obj=New-Object PSObject -Property $properties
                $finobj+=$obj
            }
     
        }
        return $finobj
    }
 
 
     
function getValue($formTitle, $textTitle){
 
$global:AllValues=@()
 
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ALLUSERS"; Value="1"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOREPAIR"; Value="1"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOMODIFY"; Value="1"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOREMOVE"; Value="1"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="USERNAME"; Value="Authorised User"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ProductLanguage"; Value="1033"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="REBOOT"; Value="ReallySuppress"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ROOTDRIVE"; Value="C:\"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ALLUSERS"; Value="1"}
 
 
 
 
 
 
    [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
    [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
 
    $objForm = New-Object System.Windows.Forms.Form
    $objForm.Text = $formTitle
    $objForm.Size = New-Object System.Drawing.Size(300,450)
    $objForm.StartPosition = "CenterScreen"
 
    $objForm.KeyPreview = $True
    $objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter") {$x=$objTextBox.Text;$objForm.Close()}})
    $objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape") {$objForm.Close()}})
 
    $OKButton = New-Object System.Windows.Forms.Button
    $OKButton.Location = New-Object System.Drawing.Size(75,370)
    $OKButton.Size = New-Object System.Drawing.Size(75,23)
    $OKButton.Text = "OK"
    $OKButton.Add_Click({$Script:userInput=$objTextBox.Text;$objForm.Close()})
    $objForm.Controls.Add($OKButton)
 
    $CANCELButton = New-Object System.Windows.Forms.Button
    $CANCELButton.Location = New-Object System.Drawing.Size(150,370)
    $CANCELButton.Size = New-Object System.Drawing.Size(75,23)
    $CANCELButton.Text = "CANCEL"
    $CANCELButton.Add_Click({$objForm.Close()})
    $objForm.Controls.Add($CANCELButton)
 
 
 
    $objTextBox = New-Object System.Windows.Forms.TextBox
    $objTextBox.Location = New-Object System.Drawing.Size(120,50)
    $objTextBox.Size = New-Object System.Drawing.Size(160,20)
    $objTextBox.Text=$env:USERNAME
    $objForm.Controls.Add($objTextBox)
     
 
    $objTextBox1 = New-Object System.Windows.Forms.TextBox
    $objTextBox1.Location = New-Object System.Drawing.Size(120,80)
    $objTextBox1.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox1)
 
    $objTextBox2 = New-Object System.Windows.Forms.TextBox
    $objTextBox2.Location = New-Object System.Drawing.Size(120,110)
    $objTextBox2.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox2)
 
    $objTextBox3 = New-Object System.Windows.Forms.TextBox
    $objTextBox3.Location = New-Object System.Drawing.Size(120,140)
    $objTextBox3.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox3)
 
    $objTextBox4 = New-Object System.Windows.Forms.TextBox
    $objTextBox4.Location = New-Object System.Drawing.Size(120,170)
    $objTextBox4.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox4)
 
    $objTextBox5 = New-Object System.Windows.Forms.TextBox
    $objTextBox5.Location = New-Object System.Drawing.Size(120,200)
    $objTextBox5.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox5)
 
    $objTextBox6 = New-Object System.Windows.Forms.TextBox
    $objTextBox6.Location = New-Object System.Drawing.Size(120,230)
    $objTextBox6.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox6)
 
    $objTextBox7 = New-Object System.Windows.Forms.TextBox
    $objTextBox7.Location = New-Object System.Drawing.Size(120,260)
    $objTextBox7.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox7)
 
    $objTextBox8 = New-Object System.Windows.Forms.TextBox
    $objTextBox8.Location = New-Object System.Drawing.Size(120,290)
    $objTextBox8.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox8)
 
    $objTextBox9 = New-Object System.Windows.Forms.TextBox
    $objTextBox9.Location = New-Object System.Drawing.Size(120,320)
    $objTextBox9.Size = New-Object System.Drawing.Size(160,20)
    $objForm.Controls.Add($objTextBox9)
 
 
 
    $objLabelMain = New-Object System.Windows.Forms.Label
    $objLabelMain.Location = New-Object System.Drawing.Size(100,20)
    $objLabelMain.Size = New-Object System.Drawing.Size(280,30)
    $objLabelMain.Text = "Enter your Input"
    $objForm.Controls.Add($objLabelMain)
 
    $objLabel = New-Object System.Windows.Forms.Label
    $objLabel.Location = New-Object System.Drawing.Size(20,50)
    $objLabel.Size = New-Object System.Drawing.Size(280,30)
    $objLabel.Text = "Engineer Name"
    $objForm.Controls.Add($objLabel)
 
    $objLabel1 = New-Object System.Windows.Forms.Label
    $objLabel1.Location = New-Object System.Drawing.Size(20,80)
    $objLabel1.Size = New-Object System.Drawing.Size(280,30)
    $objLabel1.Text = "Manufacturer"
    $objForm.Controls.Add($objLabel1)
 
    $objLabel2 = New-Object System.Windows.Forms.Label
    $objLabel2.Location = New-Object System.Drawing.Size(20,110)
    $objLabel2.Size = New-Object System.Drawing.Size(280,30)
    $objLabel2.Text = "Product Name"
    $objForm.Controls.Add($objLabel2)
 
    $objLabel3 = New-Object System.Windows.Forms.Label
    $objLabel3.Location = New-Object System.Drawing.Size(20,140)
    $objLabel3.Size = New-Object System.Drawing.Size(280,30)
    $objLabel3.Text = "Version"
    $objForm.Controls.Add($objLabel3)
 
    $objLabel4 = New-Object System.Windows.Forms.Label
    $objLabel4.Location = New-Object System.Drawing.Size(20,170)
    $objLabel4.Size = New-Object System.Drawing.Size(280,30)
    $objLabel4.Text = "ProductCode"
    $objForm.Controls.Add($objLabel4)
 
    $objLabel5 = New-Object System.Windows.Forms.Label
    $objLabel5.Location = New-Object System.Drawing.Size(20,200)
    $objLabel5.Size = New-Object System.Drawing.Size(280,30)
    $objLabel5.Text = "UpgradeCode"
    $objForm.Controls.Add($objLabel5)
 
    $objLabel6 = New-Object System.Windows.Forms.Label
    $objLabel6.Location = New-Object System.Drawing.Size(20,230)
    $objLabel6.Size = New-Object System.Drawing.Size(280,30)
    $objLabel6.Text = "FJREF"
    $objForm.Controls.Add($objLabel6)
 
     $objLabel7 = New-Object System.Windows.Forms.Label
    $objLabel7.Location = New-Object System.Drawing.Size(20,260)
    $objLabel7.Size = New-Object System.Drawing.Size(280,30)
    $objLabel7.Text = "Company"
    $objForm.Controls.Add($objLabel7)
 
    $objLabel8 = New-Object System.Windows.Forms.Label
    $objLabel8.Location = New-Object System.Drawing.Size(20,290)
    $objLabel8.Size = New-Object System.Drawing.Size(280,30)
    $objLabel8.Text = "INSTALLDIR"
    $objForm.Controls.Add($objLabel8)
 
    $objLabel9 = New-Object System.Windows.Forms.Label
    $objLabel9.Location = New-Object System.Drawing.Size(20,320)
    $objLabel9.Size = New-Object System.Drawing.Size(280,30)
    $objLabel9.Text = "Audit Key"
    $objForm.Controls.Add($objLabel9)
 
    $objForm.Topmost = $True
 
    $OKButton.add_click({
 
       $global:AllValues += New-Object -TypeName psobject -Property @{Property="Author"; Value="Fujitsu - $($objTextBox.Text)"}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$($objLabel1.Text); Value=$($objTextBox2.Text)}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel2.Text; Value=$objTextBox2.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel3.Text; Value=$objTextBox3.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel4.Text; Value=$objTextBox4.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel5.Text; Value=$objTextBox5.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel6.Text; Value=$objTextBox6.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel7.Text; Value=$objTextBox7.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel8.Text; Value=$objTextBox8.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel9.Text; Value=$objTextBox9.Text}
         
        
    })
 
    $objForm.Add_Shown({$objForm.Activate()})
 
 
 
    [void] $objForm.ShowDialog()
    return $global:AllValues
     
}
Function Compare-Transform
    {
        param($ExpectedCSVFile,$InputMSIFile,$InputMSTFile,$DBTable)
        $finobj=@()
        $ExpValues=Import-Csv $ExpectedCSVFile
        $A=Apply-Transform -SourceMSI $InputMSIFile -SourceMST $InputMSTFile -DBTable Property
         
        foreach($ExpValue in $ExpValues)
        {
            $Curval=$a.($ExpValue.Property)
            if($Curval -eq $expValue.value)
                {
                      $properties = [ordered]@{
                                                  Property = $ExpValue.Property
                                                  ExpectedValue = $ExpValue.value
                                                  CurrentValue = $Curval
                                                  Match_Status = "Matched"
                                              
                                            }
                    $obj=New-Object PSObject -Property $properties
           
                    $finobj+=$obj
                }
            Else
                {
                 $properties = [ordered]@{
                                              Property = $ExpValue.Property
                                              ExpectedValue = $ExpValue.value
                                              CurrentValue = $Curval
                                              Match_Status = "Not Matched"
                                              
                                        }
                $obj=New-Object PSObject -Property $properties
                $finobj+=$obj
            }
     
        }
        return $finobj
    }
  Function Install-Prereq
    {
 
        $enModPath="D:\PowerShell\Pacjaging\QA_TOOL\Modules"
        $precheck=Check-Prereq -enModPath $enModPath
         
        if($precheck -eq 3)
            {
                "All modules present"
            }
        else
            {
               $wshell = New-Object -ComObject Wscript.Shell
 
                $pop=$wshell.Popup("There are Missing Modules. Please copy and rerun.",0,"Install Module",0x1)
                
            }
    }
 
 
Function Load-ActionBox
{
        # Load Windows Forms & Drawing classes.
        [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
        [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
 
        # Create base form.
        $objForm = New-Object System.Windows.Forms.Form
        $objForm.Text = "Select Action"
        $objForm.Size = New-Object System.Drawing.Size(300,170)
        $objForm.StartPosition = "CenterScreen"
 
        # Configure keyboard intercepts for ESC & ENTER.
        $objForm.KeyPreview = $True
        $objForm.Add_KeyDown({
            if ($_.KeyCode -eq "Enter")
            {
                $x=$objListBox.SelectedItem
                $objForm.Close()
            }
        })
        $objForm.Add_KeyDown({
            if ($_.KeyCode -eq "Escape")
            {$objForm.Close()
            }
        })
 
        # Create OK button.
        $OKButton = New-Object System.Windows.Forms.Button
        $OKButton.Location = New-Object System.Drawing.Size(75,90)
        $OKButton.Size = New-Object System.Drawing.Size(75,23)
        $OKButton.Text = "OK"
        $OKButton.Add_Click({$global:x=$objListBox.SelectedItem;$objForm.Close()})
        #$OKButton.Add_Click({$x=$objListBox.SelectedItem;$objForm.Close()})
        $objForm.Controls.Add($OKButton)
 
        $CancelButton = New-Object System.Windows.Forms.Button
        $CancelButton.Location = New-Object System.Drawing.Size(150,90)
        $CancelButton.Size = New-Object System.Drawing.Size(75,23)
        $CancelButton.Text = "Cancel"
        $CancelButton.Add_Click({$objForm.Close()})
        $objForm.Controls.Add($CancelButton)
 
        $objLabel = New-Object System.Windows.Forms.Label
        $objLabel.Location = New-Object System.Drawing.Size(10,20)
        $objLabel.Size = New-Object System.Drawing.Size(280,20)
        $objLabel.Text = "Please select an action:"
        $objForm.Controls.Add($objLabel)
 
        $objListBox = New-Object System.Windows.Forms.ListBox
        $objListBox.Location = New-Object System.Drawing.Size(10,40)
        $objListBox.Size = New-Object System.Drawing.Size(260,20)
        $objListBox.Height = 50
 
        [void] $objListBox.Items.Add("Install")
        [void] $objListBox.Items.Add("Uninstall")
 
 
        $objForm.Controls.Add($objListBox)
 
        # Force list box to display on top of other windows.
        $objForm.TopMost = $true
 
        $objForm.Add_Shown({$objForm.Activate()})
        [void] $objForm.ShowDialog()
        return $x
}
 
 
Function Check-InstallUninstall
    {
        param($MainFolderPath)
        $INterPath= Split-Path $MainFolderPath
        $SorurceDirectory=Split-Path $INterPath
        if(Test-Path "$SorurceDirectory\Deploy-Application.exe")
            {
                Write-Host "Deploy-Application.exe found successfully"
 
            }
        else
            {
                Write-Host "Deploy-Application.exe was not found.Exiting"
                return
            }
        $ps1Files=Get-ChildItem $SorurceDirectory | where {$_.name -match ".ps1"} | select -ExpandProperty Name
        if($ps1Files.count -eq 1)
            {
                Write-Host "Ps1 file count is 1. Can proceed further"
            }
        else
            {
                Write-Host "Ps1 file count is more than one or no file present. Cannot proceed further"
                return
            }
         
        if($Action -eq "Install")
            {
                cd $SorurceDirectory
                try
                {
                .\Deploy-Application.exe .\Google_Chrome_116.0.5845.188_x64_1.ps1 -DeploymentType 'Install' -DeployMode 'Silent'
                Write-Host "Successfully initiated the Installation of the Package"
                }
                catch
                {
                    Write-Host "Error in Installing"
                    Write-Host $Error[0].Exception.Message
                }
 
            }
        elseif($Action -eq "UnInstall")
            {
                cd $SorurceDirectory
                try
                {
               .\Deploy-Application.exe .\Google_Chrome_116.0.5845.188_x64_1.ps1 -DeploymentType 'Uninstall' -DeployMode 'Silent'
                Write-Host "Successfully initiated the Uninstalltion of the Package"
                }
                catch
                {
                    Write-Host "Error in Uninstalling"
                    Write-Host $Error[0].Exception.Message
                }
 
            }
        else
            {
                Write-Host "Wrong Action Selected"
            }
         
 
         
    }
 
  Function Install-Prereq
    {
 
        $enModPath="D:\PowerShell\Pacjaging\QA_TOOL\Modules"
        $precheck=Check-Prereq -enModPath $enModPath
         
        if($precheck -eq 3)
            {
                "All modules present"
            }
        else
            {
               $wshell = New-Object -ComObject Wscript.Shell
 
                $pop=$wshell.Popup("There are Missing Modules. Please copy and rerun.",0,"Install Module",0x1)
                
            }
    }
     
function get-ValueIn($formTitle, $textTitle,$wordDocPath){
 
$global:AllValues=@()
 
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ALLUSERS"; Value="1"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOREPAIR"; Value="1"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOMODIFY"; Value="1"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOREMOVE"; Value="1"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="USERNAME"; Value="Authorised User"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ProductLanguage"; Value="1033"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="REBOOT"; Value="ReallySuppress"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ROOTDRIVE"; Value="C:\"}
$global:AllValues += New-Object -TypeName psobject -Property @{Property="ALLUSERS"; Value="1"}
 
 
 
$ValuesFromWord=Get-DataFromWord -DocFilePath $wordDocPath
$manuFacturer=($ValuesFromWord | where{$_.Property -match "ApplicationVendor"} | select -ExpandProperty Value)
 
$productName=($ValuesFromWord | where{$_.Property -match "ApplicationName"} | select -ExpandProperty Value)
$Version=($ValuesFromWord | where{$_.Property -match "Version"} | select -ExpandProperty Value)
$PackageName=($ValuesFromWord | where{$_.Property -match "PackageName"} | select -ExpandProperty Value)
$fjref=($ValuesFromWord | where{$_.Property -match "APSReference"} | select -ExpandProperty Value)
$AuditKey=($ValuesFromWord | where{$_.Property -match "AuditKey"} | select -ExpandProperty Value)
$ProdCode=($ValuesFromWord | where{$_.Property -match "ProdCode"} | select -ExpandProperty Value)
$installPath=$ValuesFromWord | where{$_.Property -match "INSTALLDIR"} | select -ExpandProperty Value
$RegVal=$ValuesFromWord | where{$_.Property -match "RegVal"} | select -ExpandProperty Value
  
    [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
    [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
 
    $objForm = New-Object System.Windows.Forms.Form
    $objForm.Text = $formTitle
    $objForm.Size = New-Object System.Drawing.Size(300,450)
    $objForm.StartPosition = "CenterScreen"
    $objForm.AutoSize=$True
    $objForm.AutoScale=$True
 
    $objForm.KeyPreview = $True
    $objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter") {$x=$objTextBox.Text;$objForm.Close()}})
    $objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape") {$objForm.Close()}})
 
    $OKButton = New-Object System.Windows.Forms.Button
    $OKButton.Location = New-Object System.Drawing.Size(75,370)
    $OKButton.Size = New-Object System.Drawing.Size(75,23)
    $OKButton.Text = "OK"
    $OKButton.Add_Click({$Script:userInput=$objTextBox.Text;$objForm.Close()})
    $objForm.Controls.Add($OKButton)
 
    $CANCELButton = New-Object System.Windows.Forms.Button
    $CANCELButton.Location = New-Object System.Drawing.Size(150,370)
    $CANCELButton.Size = New-Object System.Drawing.Size(75,23)
    $CANCELButton.Text = "CANCEL"
    $CANCELButton.Add_Click({$objForm.Close()})
    $objForm.Controls.Add($CANCELButton)
 
 
 
    $objTextBox = New-Object System.Windows.Forms.TextBox
    $objTextBox.Location = New-Object System.Drawing.Size(120,50)
    $objTextBox.Size = New-Object System.Drawing.Size(230,20)
    $objTextBox.Text=$env:USERNAME
    $objTextBox.AutoSize=$True
    $objForm.Controls.Add($objTextBox)
     
 
    $objTextBox1 = New-Object System.Windows.Forms.TextBox
    $objTextBox1.Location = New-Object System.Drawing.Size(120,80)
    $objTextBox1.Size = New-Object System.Drawing.Size(230,20)
    $objTextBox1.Text=$manuFacturer
    $objTextBox1.AutoSize=$True
     
    $objForm.Controls.Add($objTextBox1)
 
    $objTextBox2 = New-Object System.Windows.Forms.TextBox
    $objTextBox2.Location = New-Object System.Drawing.Size(120,110)
    $objTextBox2.Size = New-Object System.Drawing.Size(230,20)
     $objTextBox2.AutoSize=$True
    $objTextBox2.Text=$productName
    $objForm.Controls.Add($objTextBox2)
 
    $objTextBox3 = New-Object System.Windows.Forms.TextBox
    $objTextBox3.Location = New-Object System.Drawing.Size(120,140)
    $objTextBox3.Size = New-Object System.Drawing.Size(230,20)
     $objTextBox3.AutoSize=$True
    $objTextBox3.Text=$Version
    $objForm.Controls.Add($objTextBox3)
 
    $objTextBox4 = New-Object System.Windows.Forms.TextBox
    $objTextBox4.Location = New-Object System.Drawing.Size(120,170)
    $objTextBox4.Size = New-Object System.Drawing.Size(230,20)
     $objTextBox4.AutoSize=$True
     $objTextBox4.Text=$ProdCode
    $objForm.Controls.Add($objTextBox4)
 
    $objTextBox5 = New-Object System.Windows.Forms.TextBox
    $objTextBox5.Location = New-Object System.Drawing.Size(120,200)
    $objTextBox5.Size = New-Object System.Drawing.Size(230,20)
    $objTextBox5.AutoSize=$True
    $objForm.Controls.Add($objTextBox5)
 
    $objTextBox6 = New-Object System.Windows.Forms.TextBox
    $objTextBox6.Location = New-Object System.Drawing.Size(120,230)
    $objTextBox6.Size = New-Object System.Drawing.Size(230,20)
    $objTextBox6.AutoSize=$True
    $objTextBox6.Text=$fjref
    $objForm.Controls.Add($objTextBox6)
 
    $objTextBox7 = New-Object System.Windows.Forms.TextBox
    $objTextBox7.Location = New-Object System.Drawing.Size(120,260)
    $objTextBox7.AutoSize=$True
    $objTextBox7.Size = New-Object System.Drawing.Size(230,20)
    $objTextBox7.Text=$RegVal
    $objForm.Controls.Add($objTextBox7)
 
    $objTextBox8 = New-Object System.Windows.Forms.TextBox
    $objTextBox8.Location = New-Object System.Drawing.Size(120,290)
    $objTextBox8.Size = New-Object System.Drawing.Size(230,20)
    $objTextBox8.AutoSize=$True
    $objTextBox8.Text=$installPath
    $objForm.Controls.Add($objTextBox8)
 
    $objTextBox9 = New-Object System.Windows.Forms.TextBox
    $objTextBox9.Location = New-Object System.Drawing.Size(120,320)
    $objTextBox9.Size = New-Object System.Drawing.Size(230,20)
    $objTextBox9.AutoSize=$True
    $objTextBox9.Text=$AuditKey
    $objForm.Controls.Add($objTextBox9)
 
 
 
    $objLabelMain = New-Object System.Windows.Forms.Label
    $objLabelMain.Location = New-Object System.Drawing.Size(180,20)
    $objLabelMain.Size = New-Object System.Drawing.Size(280,30)
    $objLabelMain.Text = "Validate Input"
    $objForm.Controls.Add($objLabelMain)
 
    $objLabel = New-Object System.Windows.Forms.Label
    $objLabel.Location = New-Object System.Drawing.Size(20,50)
    $objLabel.Size = New-Object System.Drawing.Size(280,30)
    $objLabel.Text = "Engineer Name"
    $objForm.Controls.Add($objLabel)
 
    $objLabel1 = New-Object System.Windows.Forms.Label
    $objLabel1.Location = New-Object System.Drawing.Size(20,80)
    $objLabel1.Size = New-Object System.Drawing.Size(280,30)
    $objLabel1.Text = "Manufacturer"
    $objForm.Controls.Add($objLabel1)
 
    $objLabel2 = New-Object System.Windows.Forms.Label
    $objLabel2.Location = New-Object System.Drawing.Size(20,110)
    $objLabel2.Size = New-Object System.Drawing.Size(280,30)
    $objLabel2.Text = "ProductName"
    $objForm.Controls.Add($objLabel2)
 
    $objLabel3 = New-Object System.Windows.Forms.Label
    $objLabel3.Location = New-Object System.Drawing.Size(20,140)
    $objLabel3.Size = New-Object System.Drawing.Size(280,30)
    $objLabel3.Text = "ProductVersion"
    $objForm.Controls.Add($objLabel3)
 
    $objLabel4 = New-Object System.Windows.Forms.Label
    $objLabel4.Location = New-Object System.Drawing.Size(20,170)
    $objLabel4.Size = New-Object System.Drawing.Size(280,30)
    $objLabel4.Text = "ProductCode"
    $objForm.Controls.Add($objLabel4)
 
    $objLabel5 = New-Object System.Windows.Forms.Label
    $objLabel5.Location = New-Object System.Drawing.Size(20,200)
    $objLabel5.Size = New-Object System.Drawing.Size(280,30)
    $objLabel5.Text = "UpgradeCode"
    $objForm.Controls.Add($objLabel5)
 
    $objLabel6 = New-Object System.Windows.Forms.Label
    $objLabel6.Location = New-Object System.Drawing.Size(20,230)
    $objLabel6.Size = New-Object System.Drawing.Size(280,30)
    $objLabel6.Text = "FJREF"
    $objForm.Controls.Add($objLabel6)
 
     $objLabel7 = New-Object System.Windows.Forms.Label
    $objLabel7.Location = New-Object System.Drawing.Size(20,260)
    $objLabel7.Size = New-Object System.Drawing.Size(280,30)
    $objLabel7.Text = "Package Code"
    $objForm.Controls.Add($objLabel7)
 
    $objLabel8 = New-Object System.Windows.Forms.Label
    $objLabel8.Location = New-Object System.Drawing.Size(20,290)
    $objLabel8.Size = New-Object System.Drawing.Size(280,30)
    $objLabel8.Text = "INSTALLDIR"
    $objForm.Controls.Add($objLabel8)
 
    $objLabel9 = New-Object System.Windows.Forms.Label
    $objLabel9.Location = New-Object System.Drawing.Size(20,320)
    $objLabel9.Size = New-Object System.Drawing.Size(280,30)
    $objLabel9.Text = "Audit_Key"
    $objForm.Controls.Add($objLabel9)
 
    $objForm.Topmost = $True
 
    $OKButton.add_click({
 
       $global:AllValues += New-Object -TypeName psobject -Property @{Property="Author"; Value="Fujitsu - $($objTextBox.Text)"}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$($objLabel1.Text); Value=$($objTextBox1.Text)}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel2.Text; Value=$objTextBox2.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel3.Text; Value=$objTextBox3.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel4.Text; Value=$objTextBox4.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel5.Text; Value=$objTextBox5.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel6.Text; Value=$objTextBox6.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel7.Text; Value=$objTextBox7.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel8.Text; Value=$objTextBox8.Text}
       $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel9.Text; Value=$objTextBox9.Text}
         
        
    })
 
    $objForm.Add_Shown({$objForm.Activate()})
 
 
 
    [void] $objForm.ShowDialog()
    return $global:AllValues
     
}
 
function get-ValueInnEw($formTitle, $textTitle,$wordDocPath)
    {
 
        $global:AllValues=@()
 
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ALLUSERS"; Value="1"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOREPAIR"; Value="1"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOMODIFY"; Value="1"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ARPNOREMOVE"; Value="1"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="USERNAME"; Value="Authorised User"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ProductLanguage"; Value="1033"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="REBOOT"; Value="ReallySuppress"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ROOTDRIVE"; Value="C:\"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="ALLUSERS"; Value="1"}
 
 
 
        $ValuesFromWord=Get-DataFromWordNew -DocFilePath $wordDocPath
        $manuFacturer=($ValuesFromWord | where{$_.Property -match "ApplicationVendor"} | select -ExpandProperty Value)
 
        $productName=($ValuesFromWord | where{$_.Property -match "ApplicationName"} | select -ExpandProperty Value)
        $Version=($ValuesFromWord | where{$_.Property -match "Version"} | select -ExpandProperty Value)
        $PackageName=($ValuesFromWord | where{$_.Property -match "PackageName"} | select -ExpandProperty Value)
        $fjref=($ValuesFromWord | where{$_.Property -match "APSReference"} | select -ExpandProperty Value)
        $AuditKey=($ValuesFromWord | where{$_.Property -match "AuditKey"} | select -ExpandProperty Value)
        $ProdCode=($ValuesFromWord | where{$_.Property -match "ProdCode"} | select -ExpandProperty Value)
        $installPath=$ValuesFromWord | where{$_.Property -match "INSTALLDIR"} | select -ExpandProperty Value
        $RegVal=$ValuesFromWord | where{$_.Property -match "RegVal"} | select -ExpandProperty Value
  
        [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Drawing")
        [void] [System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms")
 
        $objForm = New-Object System.Windows.Forms.Form
        $objForm.Text = $formTitle
        $objForm.Size = New-Object System.Drawing.Size(300,450)
        $objForm.StartPosition = "CenterScreen"
        $objForm.AutoSize=$True
        $objForm.AutoScale=$True
 
        $objForm.KeyPreview = $True
        $objForm.Add_KeyDown({if ($_.KeyCode -eq "Enter") {$x=$objTextBox.Text;$objForm.Close()}})
        $objForm.Add_KeyDown({if ($_.KeyCode -eq "Escape") {$objForm.Close()}})
 
        $OKButton = New-Object System.Windows.Forms.Button
        $OKButton.Location = New-Object System.Drawing.Size(75,370)
        $OKButton.Size = New-Object System.Drawing.Size(75,23)
        $OKButton.Text = "OK"
        $OKButton.Add_Click({$Script:userInput=$objTextBox.Text;$objForm.Close()})
        $objForm.Controls.Add($OKButton)
 
        $CANCELButton = New-Object System.Windows.Forms.Button
        $CANCELButton.Location = New-Object System.Drawing.Size(150,370)
        $CANCELButton.Size = New-Object System.Drawing.Size(75,23)
        $CANCELButton.Text = "CANCEL"
        $CANCELButton.Add_Click({$objForm.Close()})
        $objForm.Controls.Add($CANCELButton)
 
 
 
        $objTextBox = New-Object System.Windows.Forms.TextBox
        $objTextBox.Location = New-Object System.Drawing.Size(120,50)
        $objTextBox.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox.Text=$env:USERNAME
        $objTextBox.AutoSize=$True
        $objForm.Controls.Add($objTextBox)
     
 
        $objTextBox1 = New-Object System.Windows.Forms.TextBox
        $objTextBox1.Location = New-Object System.Drawing.Size(120,80)
        $objTextBox1.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox1.Text=$manuFacturer
        $objTextBox1.AutoSize=$True
     
        $objForm.Controls.Add($objTextBox1)
 
        $objTextBox2 = New-Object System.Windows.Forms.TextBox
        $objTextBox2.Location = New-Object System.Drawing.Size(120,110)
        $objTextBox2.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox2.AutoSize=$True
        $objTextBox2.Text=$productName
        $objForm.Controls.Add($objTextBox2)
 
        $objTextBox3 = New-Object System.Windows.Forms.TextBox
        $objTextBox3.Location = New-Object System.Drawing.Size(120,140)
        $objTextBox3.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox3.AutoSize=$True
        $objTextBox3.Text=$Version
        $objForm.Controls.Add($objTextBox3)
 
        $objTextBox4 = New-Object System.Windows.Forms.TextBox
        $objTextBox4.Location = New-Object System.Drawing.Size(120,170)
        $objTextBox4.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox4.AutoSize=$True
        $objTextBox4.Text=$ProdCode
        $objForm.Controls.Add($objTextBox4)
 
        $objTextBox5 = New-Object System.Windows.Forms.TextBox
        $objTextBox5.Location = New-Object System.Drawing.Size(120,200)
        $objTextBox5.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox5.AutoSize=$True
        $objForm.Controls.Add($objTextBox5)
 
        $objTextBox6 = New-Object System.Windows.Forms.TextBox
        $objTextBox6.Location = New-Object System.Drawing.Size(120,230)
        $objTextBox6.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox6.AutoSize=$True
        $objTextBox6.Text=$fjref
        $objForm.Controls.Add($objTextBox6)
 
        $objTextBox7 = New-Object System.Windows.Forms.TextBox
        $objTextBox7.Location = New-Object System.Drawing.Size(120,260)
        $objTextBox7.AutoSize=$True
        $objTextBox7.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox7.Text=$RegVal
        $objForm.Controls.Add($objTextBox7)
 
        $objTextBox8 = New-Object System.Windows.Forms.TextBox
        $objTextBox8.Location = New-Object System.Drawing.Size(120,290)
        $objTextBox8.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox8.AutoSize=$True
        $objTextBox8.Text=$installPath
        $objForm.Controls.Add($objTextBox8)
 
        $objTextBox9 = New-Object System.Windows.Forms.TextBox
        $objTextBox9.Location = New-Object System.Drawing.Size(120,320)
        $objTextBox9.Size = New-Object System.Drawing.Size(230,20)
        $objTextBox9.AutoSize=$True
        $objTextBox9.Text=$AuditKey
        $objForm.Controls.Add($objTextBox9)
 
 
 
        $objLabelMain = New-Object System.Windows.Forms.Label
        $objLabelMain.Location = New-Object System.Drawing.Size(180,20)
        $objLabelMain.Size = New-Object System.Drawing.Size(280,30)
        $objLabelMain.Text = "Validate Input"
        $objForm.Controls.Add($objLabelMain)
 
        $objLabel = New-Object System.Windows.Forms.Label
        $objLabel.Location = New-Object System.Drawing.Size(20,50)
        $objLabel.Size = New-Object System.Drawing.Size(280,30)
        $objLabel.Text = "Engineer Name"
        $objForm.Controls.Add($objLabel)
 
        $objLabel1 = New-Object System.Windows.Forms.Label
        $objLabel1.Location = New-Object System.Drawing.Size(20,80)
        $objLabel1.Size = New-Object System.Drawing.Size(280,30)
        $objLabel1.Text = "Manufacturer"
        $objForm.Controls.Add($objLabel1)
 
        $objLabel2 = New-Object System.Windows.Forms.Label
        $objLabel2.Location = New-Object System.Drawing.Size(20,110)
        $objLabel2.Size = New-Object System.Drawing.Size(280,30)
        $objLabel2.Text = "ProductName"
        $objForm.Controls.Add($objLabel2)
 
        $objLabel3 = New-Object System.Windows.Forms.Label
        $objLabel3.Location = New-Object System.Drawing.Size(20,140)
        $objLabel3.Size = New-Object System.Drawing.Size(280,30)
        $objLabel3.Text = "ProductVersion"
        $objForm.Controls.Add($objLabel3)
 
        $objLabel4 = New-Object System.Windows.Forms.Label
        $objLabel4.Location = New-Object System.Drawing.Size(20,170)
        $objLabel4.Size = New-Object System.Drawing.Size(280,30)
        $objLabel4.Text = "ProductCode"
        $objForm.Controls.Add($objLabel4)
 
        $objLabel5 = New-Object System.Windows.Forms.Label
        $objLabel5.Location = New-Object System.Drawing.Size(20,200)
        $objLabel5.Size = New-Object System.Drawing.Size(280,30)
        $objLabel5.Text = "UpgradeCode"
        $objForm.Controls.Add($objLabel5)
 
        $objLabel6 = New-Object System.Windows.Forms.Label
        $objLabel6.Location = New-Object System.Drawing.Size(20,230)
        $objLabel6.Size = New-Object System.Drawing.Size(280,30)
        $objLabel6.Text = "FJREF"
        $objForm.Controls.Add($objLabel6)
 
        $objLabel7 = New-Object System.Windows.Forms.Label
        $objLabel7.Location = New-Object System.Drawing.Size(20,260)
        $objLabel7.Size = New-Object System.Drawing.Size(280,30)
        $objLabel7.Text = "Package Code"
        $objForm.Controls.Add($objLabel7)
 
        $objLabel8 = New-Object System.Windows.Forms.Label
        $objLabel8.Location = New-Object System.Drawing.Size(20,290)
        $objLabel8.Size = New-Object System.Drawing.Size(280,30)
        $objLabel8.Text = "INSTALLDIR"
        $objForm.Controls.Add($objLabel8)
 
        $objLabel9 = New-Object System.Windows.Forms.Label
        $objLabel9.Location = New-Object System.Drawing.Size(20,320)
        $objLabel9.Size = New-Object System.Drawing.Size(280,30)
        $objLabel9.Text = "Audit_Key"
        $objForm.Controls.Add($objLabel9)
 
        $objForm.Topmost = $True
 
        $OKButton.add_click({
 
        $global:AllValues += New-Object -TypeName psobject -Property @{Property="Author"; Value="Fujitsu - $($objTextBox.Text)"}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$($objLabel1.Text); Value=$($objTextBox1.Text)}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel2.Text; Value=$objTextBox2.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel3.Text; Value=$objTextBox3.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel4.Text; Value=$objTextBox4.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel5.Text; Value=$objTextBox5.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel6.Text; Value=$objTextBox6.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel7.Text; Value=$objTextBox7.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel8.Text; Value=$objTextBox8.Text}
        $global:AllValues += New-Object -TypeName psobject -Property @{Property=$objLabel9.Text; Value=$objTextBox9.Text}
         
        
    })
 
    $objForm.Add_Shown({$objForm.Activate()})
 
 
 
    [void] $objForm.ShowDialog()
    return $global:AllValues
     
}
#>