release.txt
|
============================
R E L E A S E N O T E S ============================ QLogic FastLinQ PowerKit for Windows, Linux and ESXi Marvell Semiconductor Inc, Copyright (c) 2018, All rights reserved. Version 1.0.79 (Oct 26, 2018) ------------------------------ CQ Fixes: --------- 1] Added new Firmware Type INIT_HW (25) in cmdlet Get-QLGCFirmwareInfo 2] Blocked NPAR support for 100G adapters (Split and Non-Split modes) in-case of Windows only. Version 1.0.78 (Oct 23, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00104115 - Unable to set Boot Protocol in MBABootCFG using OMI-Provider on specific OEM adapter. Version 1.0.77 (Oct 17, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00103963 - MAC address getting duplicate after changing adapter mode SF toNPAR using 1x100G adapter. 2] Cont00103910 - QCCPowerKit: IPv6 config entry is not available for "Save-QLGCiSCSIConfigParamsToXML"(more Fixes). 3] Removed RestAPI support from Installer. Version 1.0.76 (Oct 12, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00103990 - OMI-Provider combined issues in ESXi 2] Cont00103910 - QCCPowerKit: IPv6 config entry is not available for "Save-QLGCiSCSIConfigParamsToXML" 3] Port Mode Changes: Added 4X10 support for 100G Adapters. Version 1.0.75 (Sep 27, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00103601 : IPV6 IP address reflect in IP6 Default gateway. 2] Added new Cmdlet "Set-QLGCRemoteHostAdapterConfigsFromXML" to configure multiple adapters of desired remote host systems. 3] Added new OEM adapters to the device list. 4] Synchronized with new QLMAPI libraries. Version 1.0.74 (Sep 21, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00103552: Segmentation fault after upgrading MBI on RHEL 7.6 inbox drivers for specific OEM adapter.� Version 1.0.73 (Sep 06, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00103281 - Powerkit and other tool is getting close while adding static iSCSI target.� 2] Cont00103120 - Unable to set iSCSI Subnet Prefix using Powerkit and other tools.� 3] Source Code Optimizations. Version 1.0.72 (Aug 14, 2018) ------------------------------ issue : Source Code Optimization. Version 1.0.71 (July 26, 2018) ------------------------------ issue : Optimized the code to improve the performance for advanced Parameters. Version 1.0.70 (July 23, 2018) ------------------------------ issue : Unable to set VLAN ID Pool values in the range of [ 1 - 255 ] on the port. CQ Fixes: --------- 1] Cont00102719: Unable to set iSCSI at Boot Protocol in iSCSI Boot CFG. Version 1.0.69 (July 20, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00102719: Unable to set iSCSI at Boot Protocol in iSCSI Boot CFG. 2] Cont00102732: Unable to change the Adapter Advanced Parameters Using command Set-QLGCAdapterAdvancedParametersFromXML. Version 1.0.68 (July 18, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00102711 : Save-QLGCVLANConfigToXML showing Function No. as 0 and 1 for all the function for E3 adapter in Multi Function Mode Version 1.0.67 (July 17, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00102691: Set and Save cmdlets showing failed message "The remote procedure call failed. 2] Cont00102698: Unable to set ISCSI Boot CFG on E3 adapter. Version 1.0.66 (July 13, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00102662: Able to set FCoE and PXE both as a boot protocol using OMI-Provider on specific OEM adapter. 2] Cont00102664: Save-QLGCSRIOVConfigToXML : XML file is not saving correct value in NPAR on specific OEM adapter. Version 1.0.65 (July 12, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00102614: Able to RDMA protocol enabled on Storage function and disabled Ethernet function in NPAR on Specific OEM adapter. 2] Updated Cmdlet help for Save-QLGCiSCSIConfigParamsToXML and Set-QLGCiSCSIConfigParamsFromXML. Version 1.0.64 (July 10, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00102553: Save-QLGCiSCSIConfigParamsToXML command is not executing and hang the cursor. 2] Cont00102558: Save-QLGCSRIOVConfigToXML command is not executing on ESXi. 3] Cont00102510: OMI Provider : Link speed showing Unknown in port level using Qlogic Kingston E3 adapter. 4] Cont00102565: Set-QLGCFCoEBootConfigFromXML : Set operation save wrong bootSourceInfo_wwpn value on E3 adapter. 5] Cont00102614: Able to RDMA protocol enabled on Storage function and disabled Ethernet function in NPAR on Specific OEM adapter. Version 1.0.63 (July 06, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00102570: Allow to set MinBw greater than MaxBw in NPAR using OMI-Provider. 2] Cont00102558: Save-QLGCSRIOVConfigToXML command is not executing on ESXi. 3] Cont00102565: Set-QLGCFCoEBootConfigFromXML : Set operation save wrong bootSourceInfo_wwpn value on E3 adapter. 4] Cont00102553: Save-QLGCiSCSIConfigParamsToXML command is not executing and hang the cursor. 5] Cont00102560: Save-QLGCPortAdvancedConfigParamsToXML command is not executing on ESXi 6] Cont00102454: Unable to set iSCSI as boot protocol in MBABootCFg on E3 adapter using OMI-Provider 7} Cont00102457: Need success message after successfully login and refreshed with isns server in iscsi Version 1.0.62 (July 02, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00102306: Common Help update for OMI Provider(1.0.61). 2] Cont00102454: Unable to set iSCSI as boot protocol in MBABootCFg 3] Cont00102415: Unable to Enabled/Disabled Target parameter using OMI Provider 4] Cont00102410: Get-QLGCiSCSILun is not showing any out put using latest OMI-Provider - ESX 5] Cont00102431: Get-QLGCFCoEBootConfigInfo is not showing any out put using latest OMI-Provider on E3 6] Cont00102453: Get-QLGCPhyPort is not showing proper output on E3 adapter 7] Cont00102313: MAC Address is showing 0 in Get-QLGCFCoE command output on Austin C adapter 8] Cont00102412: In DMI Data Type and Speed showing blank on Qlogic Austin adapter using OMI Provider. 9] Cont00102417: Unable to create VN port using OMI Provider. 10]Cont00102415: Unable to Enabled/Disabled Target parameter using OMI Provider. 11] Cont00102314: Set-QLGCNicPartConfigFromXML giving error message while change the mode. 12] Cont00102385: Set-QLGCMBABootConfigFromXML one of the port is saving information and giving an error in omi provider 1.0.61 13] Cont00102388: Issue in Port 1 for changing values 14] Cont00102333: Unable to disabled �TCPIPviaDHCP� Notes: ------ 1] The following Cmdlets are deprecated and replaced with new equivalent Cmdlets. ################################################################################# # Deprecated Old Cmdlet Name Equivalent New Cmdlet Name # ################################################################################# #1 Set-QLGCFCoEGeneralConfig Set-QLGCFCoEGeneralConfigFromXML # #2 Set-QLGCFunction Set-QLGCSRIOVConfigFromXML # #3 Set-QLGCiSCSI Set-QLGCiSCSIConfigParamsFromXML # #4 Set-QLGCNdisAdvancedParameter Set-QLGCNdisAdvancedParametersFromXML # # # #5 Set-QLGCNicParameter Set-QLGCNicParametersFromXML # #6 Set-QLGCPortAdvancedParameter Set-QLGCPortAdvancedConfigParamsFromXML # #7 Set-QLGCAdapterAdvancedParameter Set-QLGCAdapterAdvancedParametersFromXML # ################################################################################# 2] The following Cmdlets are also added for saving configuration to a XML file. 1] Save-QLGCFCoEGeneralConfigToXML 2] Save-QLGCiSCSIConfigParamsToXML 3] Save-QLGCNdisAdvancedParametersToXML 4] Save-QLGCNicParametersToXML 5] Save-QLGCPortAdvancedConfigParamsToXML 6] Save-QLGCSRIOVConfigToXML 7] Save-QLGCAdapterAdvancedParametersToXML Version 1.0.61 (June 18, 2018) ------------------------------ CQ Fixes: --------- 1] Cont00102259 - Update help command for OMI Provider 1.0.60 release 2] Cont00102196 - Giving successful message for wrong parameter as well. 3] Cont00102281 - unable to change remote agent password on OMI Provider 1.0.60 4] Cont00102183 - Supporting NPAR operations 5] Cont00101991 - IPDNS is not reflecting in Set-QLGCiSCSIBootCfg and Get-QLGCiSCSIBootCfg command 6] Cont00102181 - Get-QLGCEnumParamValuesDesc command not working 7] Cont00102208 - Get-QLGCNic not showing proper info 8] Updated Readme.txt Notes: ------ 1] The following Cmdlets are deprecated and replaced with new equivalent Cmdlets. ######################################################################### # Deprecated Old Cmdlet Name Equivalent New Cmdlet Name # ######################################################################### #1 Set-QLGCNPARConfiguration Set-QLGCNicPartConfigFromXML # #2 Set-QLGCiSCSIBootConfiguration Set-QLGCiSCSIBootConfigFromXML # #3 Set-QLGCMBAConfiguration Set-QLGCMBABootConfigFromXML # #4 Set-QLGCFCoEBootConfiguration Set-QLGCFCoEBootConfigfromXML # # # #5 Set-QLGCFCoEBootConfigInfo Set-QLGCFCoEBootConfigfromXML # #6 Set-QLGCPhyPortMBACfg Set-QLGCMBABootConfigFromXML # #7 Set-QLGCiSCSIBootCfg Set-QLGCiSCSIBootConfigFromXML # #8 Set-NicPartConfig Set-QLGCNicPartConfigFromXML # ######################################################################### 2] The following Cmdlets names are changed in-order to avoid confusion and also maintain uniformity in �Cmdlet name� for Set/Get XML Cmdlets. ######################################################################### # S.No Old Cmdlet Name New Cmdlet Name # ######################################################################### #1 Save-QLGCNicPartitionCfg Save-QLGCNicPartConfigToXML # #2 Set-QLGCNicPartConfig Set-QLGCNicPartConfigFromXML # #3 Save-QLGCVLANConfig Save-QLGCVLANConfigToXML # #4 Set-QLGCVLANConfig Set-QLGCVLANConfigFromXML # ######################################################################### Version 1.0.60 (June 08, 2018) ------------------------------ Fixes: New Enhancements: ----------------- 1] Added Set-QLGCMBABootConfigFromXML, "Set-QLGCFCoEBootConfigfromXML" amd "Set-QLGCiSCSIBootConfigFromXML" cmdlets support to set MBA, FCoE & iSCSI Configuration in a XML file. 2] Added cmdlet Help for Set-QLGCMBABootConfigFromXML , Set-QLGCiSCSIBootConfigFromXML and Set-QLGCFCoEBootConfigFromXML. CQ Fixes: --------- 1] Cont00102091 - Need a command to check version of OMI Provider 2] Cont00101898 - Unable to do Reset-QLGCHost using OMI Provider. 3] Cont00102116 - Update help document OMI provider cmdlets 4] Cont00101978 - Add-QLGCiSCSIStaticTarget getting fail using OMI Provider. 5] Cont00101828 - unable to set PXE+FCoE using OMI Provider on specific OEM adapter. 6] Updated readme.txt with more information. Version 1.0.59 (May 25, 2018) ----------------------------- Fixes: New Features: ------------- 1] Added initial "qlgcfastlinq ESXi Provider" support to manage FastLinQ 34xx/84xx/45xxx family of adapters for VMware host system. 2] Added Save-QLGCMBABootConfigToXML, Save-QLGCFCoEBootConfigToXML & "Save-QLGCiSCSIBootConfigToXML" cmdlets support to save MBA, FCoE & iSCSI Configuration in a XML file. 3] Added cmdlet Help for Save-QLGCMBABootConfigToXML , Save-QLGCiSCSIBootConfigToXML and Save-QLGCFCoEBootConfigToXML. 4] Updated readme.txt with new OS ESXi support and other information. CQ Fixes: --------- 1] Cont00101667 - Combination of ETH_FCOE_IWARP_ROCE is not found in OMI Provider 2] Cont00101719 - Not getting correct parameter at �default_mode_protocol� in OMI Provider 3] Cont00101689 - Description and Example is missing from cmdlets "Get-QLGCEnumParamValuesDesc" 4] Cont00101825 - need to cleanup the Get/Set-QLGCFCoEBootConfigInfo help. 5] Cont00101852 - OMI provider is supporting NPAR in on specific OEM adaper. Version 1.0.58 (March 09, 2018) ----------------------------------- Fixes: 1] Added "Save-QLGCVLANConfig" and "Set-QLGCVLANConfig" cmdlets support to save/set VLAN Configuration in a XML file. 2] Added cmdlet Help for Save-QLGCVLANConfig and Set-QLGCVLANConfig. Version 1.0.57 (Feb 09, 2018) ----------------------------------- Fixes: 1] Fixed issues related to E3/E4 Set-QLGCNicPartitionCfg. 2] Added "Save-QLGCNicPartitionCfg" cmdlet support to save NicPart Configuration in a XML file. 3] Added cmdlet Help for Save-QLGCNicPartitionCfg and Set-QLGCNicPartitionCfg. Version 1.0.56 (Jan 12, 2018) ----------------------------------- Fixes: Cont00098855 : Unable to Get/Set Adapter port mode on 1x40G adapter using OMI Provider. Cont00098856 : Able to do Get/Set QLGCNicPartFunctionConfig on Non NPAR supported 4x10G adapter using OMI Provider. Cont00098784 : Link speed not sync with all other apps after changing link speed using OMI Provider. Cont00098857 : While changing Default mode protocol, getting error "Invalid input. Please provide valid input for MinBw" Version 1.0.55 (Dec 21, 2017) ----------------------------------- Fixes: 1] CQ98569: Allow NPAR for Lenovo LaMesa adapter Version 1.0.54 (Dec 18, 2017) ----------------------------------- Fixes: 1] Allow SmartAn setting from MBA Boot Config for 579xx based adapters Version 1.0.53 (Dec 12, 2017) ----------------------------------- Fixes: 1] Added support for PortMode configuration by adding QLGC_AdapterAdvancedParameter class. Version 1.0.52 (Nov 20, 2017) ----------------------------------- Fixes: 1] CQ97733: PS Script combine issues. 2] CQ96694: Taking 4-5 mins for Get/Set-QLGCNdisAdvancedParameter any parameters. Version 1.0.51 (Nov 11, 2017) ----------------------------------- Fixes: 1] CQ97733: PS Script combine issues. Version 1.0.50 (Oct 26, 2017) ----------------------------------- Fixes: 1] CQ97514: connect-QLGCHost password input setting needs to be documented in help and user guide 2] HP 12:20 : NPAR disabled for HP adapters 3] GetCustomDiagnosticData support Version 1.0.49 (Oct 11, 2017) ----------------------------------- Fixes: 1] Only allow NPAR1.5 on E3-Banjo(536 FLR-T) Adapter based on MFW version [v7.15.01 onwards] 2] New media type "BackPlane" added to PhysicalMediaType. 3] iSCSI Boot and FCoE boot are blocked on E3/E4 when Adapter is in OV mode. 4] CQ97023: Not able to create VN ports for FCoE using OMI in HP 12.20 with LINUX Version 1.0.48 (Oct 04, 2017) ----------------------------------- Fixes: 1] Only allow NPAR1.5 on E3-Banjo(536 FLR-T) Adapter based on MFW version [v7.13.55 onwards] 2] CQ96981:Lenovo_La_Mesa_QL41262-2x25:Need to remove "iSCSI Boot cfg" tab from QCC GUI, as La_Mesa does not support storage protocol 3] RESTApi support 4] New media type "BackPlane" added to PhysicalMediaType. 5] Block iBFT boot-protocol in MBA Boot Config for Lenovo Jawa adapters. Version 1.0.47 (Sep 27, 2017) ----------------------------------- Fixes: 1] CQ96853 : Get/Set-QLGCNicPartPortConfig showing 8 entry for 4 port adapters. Version 1.0.46 (Sep 21, 2017) ----------------------------------- Fixes: 1] CQ96853 : Get/Set-QLGCNicPartPortConfig showing 8 entry for 4 port adapters. 2] CQ96693 : Combine issue for Get/Set-QLGCNicParameter. 3] CQ96710 : Physical media type is UNKNOWN for 25G link up in HP Queenie using OMI Provider cmdlet QLGC-PhyPort 4] CQ96532 : No cmdlets for iSCSI general configuration Version 1.0.45 (Sep 13, 2017) ----------------------------------- Fixes: 1] CQ96554 : Not giving any message after setting iSCSI general configuration using "Set-QLGCiSCSI". 2] CQ96532 : No cmdlets for iSCSI general configuration 3] CQ96523 : Get-QLGCSRIOVSwitchInfo : "switchFriendlyName" not showing full and Switch type showing blank. 4] CQ96526 : Get-QLGCSriovVFInfo : totalRecvPkts, TotalSentPkts, totalRecvBytes and totalSentBytes showing wrong values. 5] CQ96355 : "Get-QLGCFCoEBootConfigInfo" : "BootToFCoETarget" showing Enabled even all other apps boot mode showing disabled. 6] CQ96587 : Examples are not available for "Set-QLGCiSCSI". 7] CQ96558 : DCBX Status displayed BLANK in OMI-Provider when it's enabled on adapter for HP 12.20 7] CQ96557 : Some of the feilds in QLGC-PhyPort info displayed UNKNOWN despite Link-up on HP 12.20 using OMI-Provider Version 1.0.44 (Sep 07, 2017) ----------------------------------- Fixes: 1] CQ96498 : Garbage value in "External_PHY" in firmwareinfo cmdlt for LINUX uisng HP Quentina 2] CQ96501 : Not able to set FCoE Boot cfg using OMI Provider on LINUX for HP 12.20 3] CQ96323 : "Get-QLGCPhyPortStats" showing no output for HP AH and HP E3 adapters. 4] CQ96355 : "Get-QLGCFCoEBootConfigInfo" : "BootToFCoETarget" showing Enabled even all other apps boot mode showing disabled. Version 1.0.43 (Sep 01, 2017) ----------------------------------- Fixes: 1] CQ96369 : Not giving any error message while setting the values for not supported adapters. 2] CQ96312 : OMI Provider Help issue for 1.0.42 using Windows 2012 R2. 3] CQ96313 : "Get-QLGCFirmwareInfo" FirmwareType showing "Unknown" instead "External PHY" 4] CQ96355 : "Get-QLGCFCoEBootConfigInfo" : "BootToFCoETarget" showing Enabled even all other apps boot mode showing disabled. 5] CQ96374 : Not giving any message While setting "Set-QLGCPhyPortLLDPConfig". 6] CQ96372 : Get-QLGCPhyPortMBACfg -PhyPortHandle <UniqueID>, Can we change "PhyPortHandle" to "UniqueID" or Update the help. 7] CQ96368 : "Get-QLGCPhyPortMBACfg" : Can we display N/A for not supported adapter for "BootStrapType". Otherwise update the help. Version 1.0.42 (Aug 24, 2017) ----------------------------------- 1] DMI Data Display Issue in 'Get-QLGCPhyPort' Command. 2] Fixed Empty 'ResultMessage' for successful iSCSI Operations Version 1.0.41 (Aug 11, 2017) ----------------------------------- Fixes: 1] Cont00093828 : OMI Provider 1.0.32 combined issues on Austin C and Victoria N Adapter for Nano Server 2] Cont00095828 : DCBX info is not showing on HP Quick Adapter using OMI Provider 3] Cont00094235 : OMI Provider combined issues for Dell Catan adapters using Windows 2012 R2 4] Get-QLGCVPDInfo : Updated to display extended YB and V6 Tag correctly. 5] iSCSIDiag [Linux]: Added Support. 6] Updated OEM specific restrictions. Version 1.0.40 (Aug 04, 2017) ----------------------------------- Fixes: 1] Cont00095306 : Not giving any message after changing MaxBW using OMI Provider. 2] Improved Message and Error handling for Set Calls. Reboot Required Message - MI_RESULT =95 Refresh Host Required - MI_RESULT =96 Version 1.0.39 (Aug 03, 2017) ----------------------------------- Fixes: 1] OEM NPAR mode configurations. 2] Diag Tests for E4 on Storage function 3] Updated for OEM specific restrictions for NPAr and default modes. 4] Messages not shown after NPAR related set operations. Version 1.0.38 (July 28, 2017) ----------------------------------- Fixes: 1. Cont00094235 - OMI Provider combined issues for OEM adapters using Windows 2012 R2 2. Cont00094263 - Smart AN feature on OMI Provider. 3. Cont00094932 - Fail to add new VN Port using OMI Provider. 4. Cont00094963 - Unable to add static iscsi target using OMI provider. 5. Cont00095047 - Observed "ErrorCode1879048499" while switching between SF and MF/NPAR mode. 6. Cont00095094 - Does not display ResultMessage for NIC Diag test 7. Cont00095150 - Get-QLGCFunction : showing supported diag test for FCoE and iSCSI functions. 8. Cont00095294 - Not giving any message after performed SRIOV Enabled/disabled. Version 1.0.37 (June 10, 2017) ----------------------------------- Fixes: 1. CQ94497 : channel2017E:AH/E3:QCC powerkit: failed to upgrade mbi using powerkit. Version 1.0.36 (June 08, 2017) ----------------------------------- Fixes: 1. CQ94235 : OMI Provider combined issues for Dell Catan adapters using Windows 2012 R2 2. CQ94343 : OMI Provider combined issues for HP 12.10 adapters using Windows 2012 R2 3. CQ93856 : OMI Provider 1.0.32 combined issues using Windows 2012 R2 Version 1.0.32 (May 04, 2017) ----------------------------------- Fixes: 1. Autoneg support. Version 1.0.31 (May 03, 2017) ----------------------------------- Fixes: 1. Channel restriction is added. 2. CQ93241:Start-QLGCFuncDiagnostic is showing error message on Nano Server using 1.0.28 build 3. CQ93001:Unable to output of Get-QLGCAdapter using OMI Provider 1.0.28 on Nano Server Version 1.0.30 (April 24, 2017) ----------------------------------- Fixes: 1. Added QLGC_NdisQlgcStatsInfo class 2. Removed 'Boot Strap type' of Get-QLGCPhyPortMBACfg for E4 Version 1.0.29 (April 19, 2017) ----------------------------------- Fixes: 1. CQ93241:Start-QLGCFuncDiagnostic is showing error message on Nano Server using 1.0.28 build 2. CQ93001:Unable to output of Get-QLGCAdapter using OMI Provider 1.0.28 on Nano Server Version 1.0.28 (March 28, 2017) ----------------------------------- Fixes: 1. CQ92576:QLGCNicPartFunctionConfig & Get-QLGCNicPartPortConfig cmdlet not working on powerkit Version 1.0.27 (March 06, 2017) ----------------------------------- Fixes: 1. Built with latest firmware upgrade library Version 1.0.26 (February 14, 2017) ----------------------------------- Fixes: 1. Built with latest firmware upgrade library Version 1.0.25 (December 30, 2016) ----------------------------------- Fixes: 1. Changes in Function diagnostic to run in a loop. 2. Set operation of iSCSI IPV4 and IPV6 in QLGC_iSCSIFunction 3. BootMode, AddressRedirect, IPv4Fallback properties are added for E4 in QLGC_iSCSIBootConfig Version 1.0.24 (December 19, 2016) ----------------------------------- Fixes: 1. Temperature property added in QLGC_Adapter 2. DMI Information added in QLGC_PortInfo(Get-QLGCPhyPort) 3. The total number of pf_allocation per adapter check added for AH and BB Version 1.0.23 (November 27, 2016) ----------------------------------- Fixes: 1. �Function capabilities (func_cap)� property is added in QLGC_NicPartFunctionConfig Version 1.0.22 (November 11, 2016) ----------------------------------- Fixes: 1. CQ89661: OMIv2: Not able to set VFs(PFAllocation) using Set-QLGCNicpartfunconfig cmdlet in provider 1.0.19 Version 1.0.21 (November 4, 2016) ----------------------------------- Fixes: 1. ModifiedState was not giving error on other values than 1(Modification),2(Create) or 3(Delete) Version 1.0.20 (October 28, 2016) ----------------------------------- Fixes: 1. CQ 89661: Not able to set VFs(PFAllocation) using Set-QLGCNicpartfunconfig cmdlet in provider 1.0.19 for RHEL 7.2 x64 2. CQ89602: Need of a cmdlet to create/add iface file for LINUX in OMI-Provider. 3. CQ89504: Not able to perform login to iSCSI CHAP targets in cmdlet provider 1.0.17 for RHEL 7.2 x64 4. E4 specific parameters added in iSCSIBootConfig (DHCPRequestTimeout, TargetLoginTimeout, VLANID) Version 1.0.19 (October 17, 2016) ----------------------------------- Fixes: 1. Initial release. |