UniFiTooling

1.0.10

UniFiTooling.psm1

#region ModulePreLoaded
<#
   This is an early beta version! I can't recommend using it in production.
#>
#endregion ModulePreLoaded

#region ModulePrivateFunctions
function Add-HostsEntry
{
   <#
         .SYNOPSIS
         Add a single Hosts Entry to the HOSTS File

         .DESCRIPTION
         Add a single Hosts Entry to the HOSTS File, multiple are not supported yet!

         .PARAMETER Path
         The path to the hosts file where the entry should be set. Defaults to the local computer's hosts file.

         .PARAMETER Address
         The Address address for the hosts entry.

         .PARAMETER HostName
         The hostname for the hosts entry.

         .PARAMETER force
         Force (replace)

         .EXAMPLE
         PS C:\> Add-HostsEntry -Address '0.0.0.0' -HostName 'badhost'

         Add the host 'badhost' with the Adress '0.0.0.0' (blackhole) wo the Hosts.
         If an Entry for 'badhost' exists, the new one will be appended anyway (You end up with two entries)

         .EXAMPLE
         PS C:\> Add-HostsEntry -Address '0.0.0.0' -HostName 'badhost' -force

         Add the host 'badhost' with the Adress '0.0.0.0' (blackhole) wo the Hosts.
         If an Entry for 'badhost' exists, the new one will replace the existing one.

         .NOTES
         Internal Helper, inspired by an old GIST I found

         .LINK
         Get-HostsFile

         .LINK
         Remove-HostsEntry

         .LINK
         https://gist.github.com/markembling/173887/1824b370be3fe468faceaed5f39b12bad010a417
   #>

   [CmdletBinding(ConfirmImpact = 'Medium',
   SupportsShouldProcess)]
   param
   (
      [Parameter(Mandatory,
            Position = 0,
      HelpMessage = 'The IP address for the hosts entry.')]
      [ValidateNotNullOrEmpty()]
      [Alias('ipaddress', 'ip')]
      [string]
      $Address,
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 1,
      HelpMessage = 'The hostname for the hosts entry.')]
      [ValidateNotNullOrEmpty()]
      [Alias('Host', 'Name')]
      [string]
      $HostName,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 3)]
      [switch]
      $force = $false,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 2)]
      [ValidateNotNullOrEmpty()]
      [Alias('filename', 'Hosts', 'hostsfile', 'file')]
      [string]
      $Path = "$env:windir\System32\drivers\etc\hosts"
   )
   begin {
      Write-Verbose -Message 'Start Add-HostsEntry'
   }

   process {
      if ($force)
      {
         try
         {
            $null = (Remove-HostsEntry -HostName $HostName -Path $Path -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            Write-Verbose -Message 'Looks like the entry was not there before'
         }
      }

      try
      {
         if ($pscmdlet.ShouldProcess('Target', 'Operation'))
         {
            # Get a clean (end of) file
            $paramGetContent = @{
               Path          = $Path
               Raw           = $true
               Force         = $true
               ErrorAction   = 'Stop'
               WarningAction = 'SilentlyContinue'
            }
            $HostsFileContent = (((Get-Content @paramGetContent ).TrimEnd()).ToString())

            $NewValue = "`n" + $Address + "`t`t" + $HostName
            $NewHostsFileContent = $HostsFileContent + $NewValue

            $paramSetContent = @{
               Path          = $Path
               Value         = $NewHostsFileContent
               Force         = $true
               Confirm       = $false
               Encoding      = 'UTF8'
               ErrorAction   = 'Stop'
               WarningAction = 'SilentlyContinue'
            }
            $null = (Set-Content @paramSetContent)
         }
      }
      catch
      {
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end {
      Write-Verbose -Message 'Done Add-HostsEntry'
   }
}

function ConvertFrom-UnixTimeStamp
{
   <#
         .SYNOPSIS
         Converts a Timestamp (Epochdate) into Datetime

         .DESCRIPTION
         Converts a Timestamp (Epochdate) into Datetime

         .PARAMETER TimeStamp
         Timestamp (Epochdate)

         .PARAMETER Milliseconds
         Is the given Timestamp (Epochdate) in Miliseconds instead of Seconds?

         .EXAMPLE
         PS C:\> ConvertFrom-UnixTimeStamp -TimeStamp 1547839380

         Converts a Timestamp (Epochdate) into Datetime

         .EXAMPLE
         PS C:\> ConvertFrom-UnixTimeStamp -TimeStamp 1547839380712 -Milliseconds

         Converts a Timestamp (Epochdate) into Datetime, given value is in Milliseconds

         .NOTES
         Added the 'UniFi' (Alias for the switch 'Milliseconds') because the API returns miliseconds instead of seconds
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([datetime])]
   param
   (
      [Parameter(Mandatory,
            ValueFromPipeline,
            Position = 0,
      HelpMessage = 'Timestamp (Epochdate)')]
      [ValidateNotNullOrEmpty()]
      [Alias('Epochdate')]
      [long]
      $TimeStamp,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 1)]
      [Alias('UniFi')]
      [switch]
      $Milliseconds = $false
   )

   begin
   {
      Write-Verbose -Message 'Start ConvertFrom-UnixTimeStamp'

      # Set some defaults (Never change this!!!)
      $UnixStartTime = '1/1/1970'

      # Cleanup
      $Result = $null
   }

   process
   {
      try
      {
         if ($Milliseconds)
         {
            $Result = ((Get-Date -Date $UnixStartTime -ErrorAction Stop -WarningAction SilentlyContinue).AddMilliseconds($TimeStamp))
         }
         else
         {
            try
            {
               $Result = ((Get-Date -Date $UnixStartTime -ErrorAction Stop -WarningAction SilentlyContinue).AddSeconds($TimeStamp))
            }
            catch
            {
               # Try a Fallback!
               $Result = ((Get-Date -Date $UnixStartTime -ErrorAction Stop -WarningAction SilentlyContinue).AddMilliseconds($TimeStamp))
            }
         }
      }
      catch
      {
         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
   }

   end
   {
      # Dump to the Console
      $Result

      Write-Verbose -Message 'Done ConvertFrom-UnixTimeStamp'
   }
}

function ConvertTo-UnixTimeStamp
{
   <#
         .SYNOPSIS
         Converts a Datetime into a Unix Timestamp (Epochdate)

         .DESCRIPTION
         Converts a Datetime into a Unix Timestamp (Epochdate)

         .PARAMETER Date
         The Date String that shoul be converted, default is now (if none is given)

         .PARAMETER Milliseconds
         Should the Timestamp (Epochdate) in Miliseconds instead of Seconds?

         .EXAMPLE
         PS C:\> ConvertTo-UnixTimeStamp

         Converts the actual time into a Unix Timestamp (Epochdate)

         .EXAMPLE
         PS C:\> ConvertTo-UnixTimeStamp -Milliseconds

         Converts the actual time into a Unix Timestamp (Epochdate), in milliseconds

         .EXAMPLE
         PS C:\> ConvertTo-UnixTimeStamp -Date ((Get-Date).AddDays(-1))

         Covert the same time yesterday into a Unix Timestamp (Epochdate)

         .EXAMPLE
         PS C:\> ConvertTo-UnixTimeStamp -Date ((Get-Date).AddDays(-1)) -Milliseconds

         Covert the same time yesterday into a Unix Timestamp (Epochdate), in milliseconds

         .NOTES
         Added the 'UniFi' (Alias for the switch 'Milliseconds') because the API returns miliseconds instead of seconds
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([long])]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('TimeStamp', 'DateTimeStamp')]
      [datetime]
      $Date = (Get-Date),
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 1)]
      [Alias('UniFi')]
      [switch]
      $Milliseconds = $false
   )

   begin
   {
      Write-Verbose -Message 'Start ConvertTo-UnixTimeStamp'

      # Set some defaults (Never change this!!!)
      $UnixStartTime = '1/1/1970'

      # Cleanup
      $Result = $null
   }

   process
   {
      try
      {
         if ($Milliseconds)
         {
            $Result = ([long]((New-TimeSpan -Start (Get-Date -Date $UnixStartTime -ErrorAction Stop -WarningAction SilentlyContinue) -End (Get-Date -Date $Date -ErrorAction Stop -WarningAction SilentlyContinue) -ErrorAction Stop -WarningAction SilentlyContinue).TotalMilliseconds))
         }
         else
         {
            $Result = ([long]((New-TimeSpan -Start (Get-Date -Date $UnixStartTime -ErrorAction Stop -WarningAction SilentlyContinue) -End (Get-Date -Date $Date -ErrorAction Stop -WarningAction SilentlyContinue) -ErrorAction Stop -WarningAction SilentlyContinue).TotalSeconds))
         }
      }
      catch
      {
         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
   }

   end
   {
      # Dump to the Console
      $Result

      Write-Verbose -Message 'Done ConvertTo-UnixTimeStamp'
   }
}

function Get-HostsFile
{
   <#
         .SYNOPSIS
         Print the HOSTS File in a more clean format
 
         .DESCRIPTION
         Print the HOSTS File in a more clean format
 
         .PARAMETER Path
         The path to the hosts file where the entry should be set. Defaults to the local computer's hosts file.
 
         .PARAMETER raw
         Print raw Hosts File
 
         .EXAMPLE
         PS C:\> Get-HostsFile
 
         Print the HOSTS File in a more clean format
 
         .EXAMPLE
         PS C:\> Get-HostsFile -raw
 
         Print the HOSTS File in the regular format
 
         .NOTES
         Internal Helper, inspired by an old GIST I found
 
         .LINK
         Add-HostsEntry
 
         .LINK
         Remove-HostsEntry
 
         .LINK
         https://gist.github.com/markembling/173887/1824b370be3fe468faceaed5f39b12bad010a417
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('Hosts', 'hostsfile', 'file', 'filename')]
      [string]
      $Path = "$env:windir\System32\drivers\etc\hosts",
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 1)]
      [Alias('plain')]
      [switch]
      $raw = $false
   )

   begin
   {
      Write-Verbose -Message 'Start Get-HostsFile'

      try
      {
         # Get a clean (end of) file
         $paramGetContent = @{
            Path          = $Path
            Raw           = $true
            Force         = $true
            ErrorAction   = 'Stop'
            WarningAction = 'SilentlyContinue'
         }
         $HostsFileContent = (Get-Content @paramGetContent )
      }
      catch
      {
         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
   }

   process
   {
      foreach ($line in $HostsFileContent)
      {
         if ($raw)
         {
            Write-Output -InputObject $line
         }
         else
         {
            $bits = [regex]::Split($line, '\t+')
            if ($bits.count -eq 2)
            {
               [string]$HostsFileLine = $bits

               if (-not ($HostsFileLine.StartsWith('#')))
               {
                  Write-Output -InputObject $HostsFileLine
               }
            }
         }
      }
   }

   end {
      Write-Verbose -Message 'Done Get-HostsFile'
   }
}

function Get-UniFiConfig
{
   <#
         .SYNOPSIS
         Read the UniFi config file
 
         .DESCRIPTION
         Get the default values from the UniFi config file
 
         .PARAMETER Path
         Path to the config file
 
         .EXAMPLE
         PS C:\> Get-UniFiConfig
 
         Read the UniFi config file
 
         .NOTES
         We do not import/read the username and password
 
         .LINK
         Get-UniFiCredentials
   #>
   [CmdletBinding(ConfirmImpact = 'None')]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('UnifiConfig')]
      [string]
      $Path = '.\UniFiConfig.json'
   )

   begin
   {
      Write-Verbose -Message 'Start Get-UniFiConfig'

      # Cleanup
      $RawJson = $null
      $UnifiConfig = $null
   }

   process
   {
      try
      {
         Write-Verbose -Message 'Read the Config File'

         $RawJson = (Get-Content -Path $Path -Force -ErrorAction Stop -WarningAction SilentlyContinue)

         Write-Verbose -Message 'Convert the JSON config File to a PSObject'

         $UnifiConfig = ($RawJson | ConvertFrom-Json -ErrorAction Stop -WarningAction SilentlyContinue)
      }
      catch
      {
         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }

      # Cleanup
      $RawJson = $null

      # Set the config for later use
      $Global:ApiProto = $UnifiConfig.protocol

      Write-Verbose -Message ('ApiProto is {0}' -f $ApiProto)

      $Global:ApiHost = $UnifiConfig.Hostname

      Write-Verbose -Message ('ApiHost is {0}' -f $ApiHost)

      $Global:ApiPort = $UnifiConfig.Port

      Write-Verbose -Message ('ApiPort is {0}' -f $ApiPort)

      $Global:ApiSelfSignedCert = $UnifiConfig.SelfSignedCert

      Write-Verbose -Message ('ApiSelfSignedCert is {0}' -f $ApiSelfSignedCert)

      # Build the Base URI String
      $Global:ApiUri = $ApiProto + '://' + $ApiHost + ':' + $ApiPort + '/api/'

      Write-Verbose -Message ('ApiUri is {0}' -f $ApiUri)
   }

   end
   {
      # Cleanup
      $RawJson = $null
      $UnifiConfig = $null

      Write-Verbose -Message 'Done Get-UniFiConfig'
   }
}

function Get-UniFiCredentials
{
   <#
         .SYNOPSIS
         Read the API Credentials from the UniFi config file
 
         .DESCRIPTION
         Read the API Credentials from the UniFi config file
 
         .EXAMPLE
         PS C:\> Get-UniFiCredentials
 
         Read the API Credentials from the UniFi config file
 
         .NOTES
         Only import/read the username and password
 
         .LINK
         Get-UniFiConfig
   #>
   [CmdletBinding(ConfirmImpact = 'None')]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('UnifiConfig')]
      [string]
      $Path = '.\UniFiConfig.json'
   )

   begin
   {
      Write-Verbose -Message 'Start Get-UniFiCredentials'

      # Cleanup
      $RawJson = $null
      $UnifiConfig = $null
   }

   process
   {
      try
      {
         Write-Verbose -Message 'Read the Config File'
         $RawJson = (Get-Content -Path $Path -Force -ErrorAction Stop -WarningAction SilentlyContinue)

         Write-Verbose -Message 'Convert the JSON config File to a PSObject'
         $UnifiConfig = ($RawJson | ConvertFrom-Json -ErrorAction Stop -WarningAction SilentlyContinue)
      }
      catch
      {
         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }

      # Cleanup
      $RawJson = $null

      Write-Verbose -Message 'Try to setup the API Credentials'

      if ((-not $UnifiConfig.Login.Username) -or (-not $UnifiConfig.Login.Password))
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber
         Write-Verbose -Message ('Error was in Line {0}' -f $line)

         # Bad news!
         Write-Error -Message 'Unable to setup the API Credentials, please check your config file!' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }

      $ApiUsername = $null
      $ApiPassword = $null
      $Global:ApiUsername = $UnifiConfig.Login.Username
      $Global:ApiPassword = $UnifiConfig.Login.Password

      Write-Verbose -Message 'API Credentials set'
   }

   end
   {
      # Cleanup
      $RawJson = $null
      $UnifiConfig = $null

      Write-Verbose -Message 'Start Get-UniFiCredentials'
   }
}

function Get-UnifiFirewallGroupBody
{
   <#
         .SYNOPSIS
         Build a Body for Set-UnifiFirewallGroup call
 
         .DESCRIPTION
         Build a JSON based Body for Set-UnifiFirewallGroup call
 
         .PARAMETER UnfiFirewallGroup
         Existing Unfi Firewall Group
 
         .PARAMETER UnifiCidrInput
         IPv4 or IPv6 input List
 
         .EXAMPLE
         PS C:\> Get-UnifiFirewallGroupBody -UnfiFirewallGroup $value1 -UnifiCidrInput $value2
 
         Build a Body for Set-UnifiFirewallGroup call
 
         .NOTES
         This is an internal helper function only
 
         . LINK
         Set-UnifiFirewallGroup
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([psobject])]
   param
   (
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 0,
      HelpMessage = 'Existing Unfi Firewall Group')]
      [ValidateNotNullOrEmpty()]
      [Alias('FirewallGroup')]
      [psobject]
      $UnfiFirewallGroup,
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 1,
      HelpMessage = 'IPv4 or IPv6 input List')]
      [ValidateNotNullOrEmpty()]
      [Alias('CidrInput')]
      [psobject]
      $UnifiCidrInput
   )

   begin
   {
      Write-Verbose -Message 'Start Get-UnifiFirewallGroupBody'

      Write-Verbose -Message 'Cleanup exitsing Group'
      Write-Verbose -Message "Old Values: $UnfiFirewallGroup.group_members"

      $UnfiFirewallGroup.group_members = $null
   }

   process
   {
      try
      {
         Write-Verbose -Message 'Create a new Object'

         $NewUnifiCidrItem = @()

         foreach ($UnifiCidrItem in $UnifiCidrInput)
         {
            $NewUnifiCidrItem = $NewUnifiCidrItem + $UnifiCidrItem
         }

         # Add the new values
         $paramAddMember = @{
            MemberType = 'NoteProperty'
            Name       = 'group_members'
            Value      = $NewUnifiCidrItem
            Force      = $true
         }
         $UnfiFirewallGroup | Add-Member @paramAddMember

         # Cleanup
         $NewUnifiCidrItem = $null

         # Create a new Request Body
         $paramConvertToJson = @{
            InputObject   = $UnfiFirewallGroup
            Depth         = 5
            ErrorAction   = 'Stop'
            WarningAction = 'SilentlyContinue'
         }
         $UnfiFirewallGroupJson = (ConvertTo-Json @paramConvertToJson)
      }
      catch
      {
         $null = (Invoke-InternalScriptVariables)

         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end
   {
      # Dump
      $UnfiFirewallGroupJson

      Write-Verbose -Message 'Done Get-UnifiFirewallGroupBody'
   }
}

function Get-UniFiIsAlive
{
   <#
         .SYNOPSIS
         Use a simple API call to see if the session is alive
 
         .DESCRIPTION
         Use a simple API call to see if the session is alive
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .EXAMPLE
         PS C:\> Get-UniFiIsAlive
 
         Use a simple API call to see if the session is alive
 
         .EXAMPLE
         PS C:\> Get-UniFiIsAlive -UnifiSite 'Contoso'
 
         Use a simple API call to see if the session is alive on Site 'Contoso'
 
         .NOTES
         Internal Helper Function
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([bool])]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default'
   )

   begin
   {
      Write-Verbose -Message 'Start Get-UniFiIsAlive'

      # Cleanup
      $Session = $null

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      # Set the default to FALSE
      $SessionStatus = $false
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region UniFiApiLogin
         $null = (Invoke-UniFiApiLogin -ErrorAction SilentlyContinue)
         #endregion UniFiApiLogin

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'

         $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/self'

         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region Request
         Write-Verbose -Message 'Send the Request'

         $paramInvokeRestMethod = @{
            Method        = 'Get'
            Uri           = $ApiRequestUri
            Headers       = $RestHeader
            ErrorAction   = 'SilentlyContinue'
            WarningAction = 'SilentlyContinue'
            WebSession    = $RestSession
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)

         Write-Verbose -Message ('Session Info: {0}' -f $Session)

         $SessionStatus = $true
         #endregion Request
      }
      catch
      {
         # Try to Logout
         try
         {
            $null = (Invoke-UniFiApiLogout -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            # We don't care about that
            Write-Verbose -Message 'Logout failed'
         }

         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null

         # That was it!
         $SessionStatus = $false
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null

         # That was it!
         $SessionStatus = $false
      } else {
         $SessionStatus = $true
      }
   }

   end
   {
      # Cleanup
      $Session = $null

      #region ResetSslTrust
      # Reset the SSL Trust (make sure everything is back to default)
      [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
      #endregion ResetSslTrust

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      # Dump the Result
      $SessionStatus

      Write-Verbose -Message 'Start Get-UniFiIsAlive'
   }
}

function Invoke-UniFiCidrWorkaround
{
   <#
         .SYNOPSIS
         IPv4 and IPv6 CIDR Workaround for UBNT USG Firewall Rules
 
         .DESCRIPTION
         IPv4 and IPv6 CIDR Workaround for UBNT USG Firewall Rules (Single IPv4 has to be without /32 OR single IPv6 has to be without /128)
 
         .PARAMETER CidrList
         Existing CIDR List Object
 
         .PARAMETER 6
         Process IPv6 CIDR (Single IPv6 has to be without /128)
 
         .EXAMPLE
         PS C:\> Invoke-UniFiCidrWorkaround -CidrList $value1
 
         IPv4 CIDR Workaround for UBNT USG Firewall Rules
 
         .EXAMPLE
         PS C:\> Invoke-UniFiCidrWorkaround -6 -CidrList $value1
 
         IPv6 CIDR Workaround for UBNT USG Firewall Rules
 
         .EXAMPLE
         PS C:\> $value1 | Invoke-UniFiCidrWorkaround
 
         IPv4 or IPv6 CIDR Workaround for UBNT USG Firewall Rules via Pipeline
 
         .EXAMPLE
         PS C:\> $value1 | Invoke-UniFiCidrWorkaround -6
 
         IPv6 CIDR Workaround for UBNT USG Firewall Rules via Pipeline
 
         .NOTES
         This is an internal helper function only (Will be moved to the private functions soon)
 
         .LINK
         https://github.com/jhochwald/UniFiTooling/issues/5
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([psobject])]
   param
   (
      [Parameter(Mandatory = $true,
               ValueFromPipeline = $true,
               ValueFromPipelineByPropertyName = $true,
               Position = 0,
               HelpMessage = 'Existing CIDR List Object')]
      [ValidateNotNullOrEmpty()]
      [Alias('UniFiCidrList')]
      [psobject]
      $CidrList,
      [Parameter(ValueFromPipeline = $true,
               ValueFromPipelineByPropertyName = $true,
               Position = 1)]
      [Alias('IPv6', 'V6')]
      [switch]
      $6 = $false
   )

   begin
   {
      Write-Verbose -Message 'Start Invoke-UniFiCidrWorkaround'

      # Cleanup
      $AddItem = @()
   }

   process
   {
      # Loop over the new list
      foreach ($NewInputItem in $CidrList)
      {
         if ($6)
         {
            # CIDR Workaround for UBNT USG Firewall Rules (Single IPv6 has to be without /128)
            if ($NewInputItem -match '/128')
            {
               $NewInputItem = $NewInputItem.Replace('/128', '')
            }
         }
         else
         {
            # CIDR Workaround for UBNT USG Firewall Rules (Single IP has to be without /32)
            if ($NewInputItem -match '/32')
            {
               $NewInputItem = $NewInputItem.Replace('/32', '')
            }
         }

         # Add to the List
         $AddItem = $AddItem + $NewInputItem
      }
   }

   end
   {
      # Dump
      $AddItem

      # Cleanup
      $AddItem = $null

      Write-Verbose -Message 'Done Invoke-UniFiCidrWorkaround'
   }
}

function Remove-HostsEntry
{
   <#
         .SYNOPSIS
         Removes a single Hosts Entry from the HOSTS File

         .DESCRIPTION
         Removes a single Hosts Entry from the HOSTS File, multiple are not supported yet!

         .PARAMETER Path
         The path to the hosts file where the entry should be set. Defaults to the local computer's hosts file.

         .PARAMETER HostName
         The hostname for the hosts entry.

         .EXAMPLE
         PS C:\> Remove-HostsEntry -HostName 'Dummy'

         Remove the entry for the host 'Dummy' from the HOSTS File

         .NOTES
         Internal Helper, inspired by an old GIST I found

         .LINK
         Get-HostsFile

         .LINK
         Add-HostsEntry

         .LINK
         https://gist.github.com/markembling/173887/1824b370be3fe468faceaed5f39b12bad010a417
   #>

   [CmdletBinding(ConfirmImpact = 'Medium',
   SupportsShouldProcess)]
   param
   (
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 0,
      HelpMessage = 'The hostname for the hosts entry.')]
      [ValidateNotNullOrEmpty()]
      [Alias('Host', 'Name')]
      [string]
      $HostName,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 1)]
      [ValidateNotNullOrEmpty()]
      [Alias('Hosts', 'hostsfile', 'file', 'Filename')]
      [string]
      $Path = "$env:windir\System32\drivers\etc\hosts"
   )

   begin {
      Write-Verbose -Message 'Start Remove-HostsEntry'

      try
      {
         $paramGetContent = @{
            Path          = $Path
            Raw           = $true
            Force         = $true
            ErrorAction   = 'Stop'
            WarningAction = 'SilentlyContinue'
         }
         $HostsFileContent = (((Get-Content @paramGetContent ).TrimEnd()).ToString())
      }
      catch
      {
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }

      $newLines = @()
   }

   process {
      foreach ($line in $HostsFileContent)
      {
         $bits = [regex]::Split($line, '\t+')
         if ($bits.count -eq 2)
         {
            if ($bits[1] -ne $HostName)
            {
               $newLines += $line
            }
         }
         else
         {
            $newLines += $line
         }
      }

      # Write file
      try
      {
         if ($pscmdlet.ShouldProcess('Target', 'Operation'))
         {
            $paramClearContent = @{
               Path          = $Path
               Force         = $true
               Confirm       = $false
               ErrorAction   = 'Stop'
               WarningAction = 'SilentlyContinue'
            }
            $null = (Clear-Content @paramClearContent)

            $paramSetContent = @{
               Path          = $Path
               Value         = $newLines
               Force         = $true
               Confirm       = $false
               Encoding      = 'UTF8'
               ErrorAction   = 'Stop'
               WarningAction = 'SilentlyContinue'
            }
            $null = (Set-Content @paramSetContent)
         }
      }
      catch
      {
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end {
      Write-Verbose -Message 'Donw Remove-HostsEntry'
   }
}

function Set-UniFiApiLoginBody
      {
         <#
               .SYNOPSIS
               Create the request body for the UniFi Login
 
               .DESCRIPTION
               Creates the JSON based request body for the UniFi Login
 
               .EXAMPLE
               Set-UniFiApiLoginBody
 
               Creates the JSON based request body for the UniFi Login
 
               .NOTES
               This is an internal helper function only
         #>
         [CmdletBinding(ConfirmImpact = 'None')]
         param ()

         begin
         {
            Write-Verbose -Message 'Start Set-UniFiApiLoginBody'

            # Cleanup
            $RestBody = $null
            $JsonBody = $null

            Write-Verbose -Message 'Check for API Credentials'
            if ((-not $ApiUsername) -or (-not $ApiPassword))
            {
               Write-Error -Message 'Please set the UniFi API Credentials' -ErrorAction Stop

               # Only here to catch a global ErrorAction overwrite
               break
            }
         }

         process
         {
            Write-Verbose -Message 'Create the Body Object'

            $RestBody = [PSCustomObject][ordered]@{
               username = $ApiUsername
               password = $ApiPassword
            }

            # Convert the Body Object to JSON
            try
            {
               $paramConvertToJson = @{
                  InputObject   = $RestBody
                  Depth         = 5
                  ErrorAction   = 'Stop'
                  WarningAction = 'SilentlyContinue'
               }
               $Script:JsonBody = (ConvertTo-Json @paramConvertToJson)
            }
            catch
            {
               # get error record
               [Management.Automation.ErrorRecord]$e = $_

               # retrieve information about runtime error
               $info = [PSCustomObject]@{
                  Exception = $e.Exception.Message
                  Reason    = $e.CategoryInfo.Reason
                  Target    = $e.CategoryInfo.TargetName
                  Script    = $e.InvocationInfo.ScriptName
                  Line      = $e.InvocationInfo.ScriptLineNumber
                  Column    = $e.InvocationInfo.OffsetInLine
               }

               Write-Verbose -Message $info

               Write-Error -Message ($info.Exception) -ErrorAction Stop

               # Only here to catch a global ErrorAction overwrite
               break
            }
         }

         end
         {
            Write-Verbose -Message 'Created the Body Object'

            # Cleanup
            $RestBody = $null

            Write-Verbose -Message 'Done Set-UniFiApiLoginBody'
         }
      }

function Set-UniFiDefaultRequestHeader
{
   <#
         .SYNOPSIS
         Set the default Header for all UniFi Requests
 
         .DESCRIPTION
         Set the default Header for all UniFi Requests
 
         .EXAMPLE
         PS C:\> Set-UniFiDefaultRequestHeader
 
         Set the default Header for all UniFi Requests
 
         .NOTES
         This is an internal helper function only
   #>
   [CmdletBinding(ConfirmImpact = 'None')]
   param ()

   begin
   {
      Write-Verbose -Message 'Start Set-UniFiDefaultRequestHeader'

      # Cleanup
      $RestHeader = $null
   }

   process
   {
      Write-Verbose -Message 'Create the Default Request Header'

      $Global:RestHeader = @{
         'charset'    = 'utf-8'
         'Content-Type' = 'application/json'
      }

      Write-Verbose -Message ('Default Request Header is {0}' -f $RestHeader)
   }

   end {
      Write-Verbose -Message 'Done Set-UniFiDefaultRequestHeader'
   }
}
#endregion ModulePrivateFunctions

#region ModulePublicFunctions
function Get-UnifiFirewallGroupDetails
{
   <#
         .SYNOPSIS
         Get the details about one Firewall Group via the API of the UniFi Controller
 
         .DESCRIPTION
         Get the details about one Firewall Group via the API of the UniFi Controller
 
         .PARAMETER Id
         The ID (_id) of the Firewall Group you would like to get detaild information about. Multiple values are supported.
 
         .PARAMETER Name
         The Name (not the _id) of the Firewall Group you would like to get detaild information about. Multiple values are supported.
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .EXAMPLE
         PS C:\> Get-UnifiFirewallGroupDetails -id 'ba7e58be13574ef4881a79c3'
 
         Get the details about the Firewall Group with ID ba7e58be13574ef4881a79c3 via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Get-UnifiFirewallGroupDetails -name 'MyExtDNS'
 
         Get the details about the Firewall Group MyExtDNS via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Get-UnifiFirewallGroupDetails -name 'MyExtDNS', 'MailHost'
 
         Get the details about the Firewall Groups MyExtDNS and MailHost via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Get-UnifiFirewallGroupDetails -id 'ba7e58be13574ef4881a79c3', '2437bdf7fdf04f1a96c0fd32'
 
         Get the details about the Firewall Groups with IDs ba7e58be13574ef4881a79c3 and 2437bdf7fdf04f1a96c0fd32 via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Get-UnifiFirewallGroupDetails -id 'ba7e58be13574ef4881a79c3' -UnifiSite 'Contoso'
 
         Get the details about the Firewall Groups with ID ba7e58be13574ef4881a79c3 on Site 'Contoso' via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Get-UnifiFirewallGroupDetails -name 'MailHost' -UnifiSite 'Contoso'
 
         Get the details about the Firewall Groups MailHost on Site 'Contoso' via the API of the UniFi Controller
 
         .NOTES
         Initial Release with 1.0.7
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
 
         .LINK
         https://github.com/jhochwald/UniFiTooling/issues/10
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([psobject])]
   param
   (
      [Parameter(ParameterSetName = 'Request by Id',Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 0,
      HelpMessage = 'The ID (_id) of the Firewall Group you would like to get detaild information about.')]
      [ValidateNotNullOrEmpty()]
      [Alias('FirewallGroupId')]
      [string[]]
      $Id,
      [Parameter(ParameterSetName = 'Request by Name', Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 0,
      HelpMessage = 'The Name (not the _id) of the Firewall Group you would like to get detaild information about.')]
      [ValidateNotNullOrEmpty()]
      [Alias('FirewallGroupName')]
      [string[]]
      $Name,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 1)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default'
   )

   begin
   {
      Write-Verbose -Message 'Start Get-UnifiFirewallGroupDetails'

      # Cleanup
      $Session = $null

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      #region CheckSession
      if (-not (Get-UniFiIsAlive))
      {
         #region LoginCheckLoop
         # TODO: Move to config
         [int]$NumberOfRetries = '3'
         [int]$RetryTimer = '5'
         # Setup the Loop itself
         $RetryLoop = $false
         [int]$RetryCounter = '0'
         # Original code/idea was by Thomas Maurer
         do
         {
            try
            {
               # Try to Logout
               try
               {
                  if (-not (Get-UniFiIsAlive)) { Throw }
               }
               catch
               {
                  # We don't care about that
                  Write-Verbose -Message 'Logout failed'
               }

               # Try a Session check (login is inherited here within the helper function)
               if (-not (Get-UniFiIsAlive -ErrorAction Stop -WarningAction SilentlyContinue))
               {
                  Write-Error -Message 'Login failed' -ErrorAction Stop -Category AuthenticationError
               }

               # End the Loop
               $RetryLoop = $true
            }
            catch
            {
               if ($RetryCounter -gt $NumberOfRetries)
               {
                  Write-Warning -Message ('Could still not login, after {0} retries.' -f $NumberOfRetries)

                  # Stay in the Loop
                  $RetryLoop = $true
               }
               else
               {
                  if ($RetryCounter -eq 0)
                  {
                     Write-Warning -Message ('Could not login! Retrying in {0} seconds.' -f $RetryTimer)
                  }
                  else
                  {
                     Write-Warning -Message ('Retry {0} of {1} failed. Retrying in {2} seconds.' -f $RetryCounter, $NumberOfRetries, $RetryTimer)
                  }

                  $null = (Start-Sleep -Seconds $RetryTimer)

                  $RetryCounter = $RetryCounter + 1
               }
            }
         }
         While ($RetryLoop -eq $false)
         #endregion LoginCheckLoop
      }
      #endregion CheckSession

      #region ReCheckSession
      if (-not ($RestSession))
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         Write-Error -Message 'Unable to login! Check the connection to the controller, SSL certificates, and your credentials!' -ErrorAction Stop -Category AuthenticationError

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion ReCheckSession

      # Create a new Object
      $SessionData = @()
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         switch ($PsCmdlet.ParameterSetName)
         {
            'ByName'
            {
               foreach ($SingleName in $Name)
               {
                  # Cleanup
                  $Session = $null

                  Write-Verbose -Message 'Create the Request URI'

                  $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/rest/firewallgroup/'

                  Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)

                  Write-Verbose -Message 'Send the Request'

                  $paramInvokeRestMethod = @{
                     Method        = 'Get'
                     Uri           = $ApiRequestUri
                     Headers       = $RestHeader
                     ErrorAction   = 'SilentlyContinue'
                     WarningAction = 'SilentlyContinue'
                     WebSession    = $RestSession
                  }
                  $Session = (Invoke-RestMethod @paramInvokeRestMethod)

                  Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"
                  Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"

                  # check result
                  if ($Session.meta.rc -ne 'ok')
                  {
                     # Error Message
                     Write-Error -Message 'Unable to Login' -ErrorAction Stop

                     # Only here to catch a global ErrorAction overwrite
                     break
                  }
                  elseif (-not ($Session.data))
                  {
                     # Error Message for a possible Not found
                     Write-Error -Message 'No Data - Possible Reason: Not found' -Category ObjectNotFound -ErrorAction Stop

                     # Only here to catch a global ErrorAction overwrite
                     break
                  }
                  $Session = $Session.data | Where-Object {
                     $_.name -eq $SingleName
                  }
                  $SessionData = $SessionData + $Session
               }
            }
            'ById'
            {
               foreach ($SingleId in $Id)
               {
                  # Cleanup
                  $Session = $null

                  Write-Verbose -Message 'Create the Request URI'

                  $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/rest/firewallgroup/' + $SingleId

                  Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)

                  Write-Verbose -Message 'Send the Request'

                  $paramInvokeRestMethod = @{
                     Method        = 'Get'
                     Uri           = $ApiRequestUri
                     Headers       = $RestHeader
                     ErrorAction   = 'SilentlyContinue'
                     WarningAction = 'SilentlyContinue'
                     WebSession    = $RestSession
                  }
                  $Session = (Invoke-RestMethod @paramInvokeRestMethod)

                  Write-Verbose -Message ('Session Info: {0}' -f $Session)

                  # check result
                  if ($Session.meta.rc -ne 'ok')
                  {
                     # Error Message
                     Write-Error -Message 'Unable to Login' -ErrorAction Stop

                     # Only here to catch a global ErrorAction overwrite
                     break
                  }
                  elseif (-not ($Session.data))
                  {
                     # Error Message for a possible Not found
                     Write-Error -Message 'No Data - Possible Reason: Not found' -Category ObjectNotFound -ErrorAction Stop

                     # Only here to catch a global ErrorAction overwrite
                     break
                  }
                  $SessionData = $SessionData + $Session.data
               }
            }
         }
      }
      catch
      {
         # Try to Logout
         $null = (Invoke-UniFiApiLogout)

         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust

         #region RestoreProgressPreference
         $ProgressPreference = $ExistingProgressPreference
         #endregion RestoreProgressPreference
      }
   }

   end
   {
      # Dump the Result
      $SessionData

      # Cleanup
      $SessionData = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Done Get-UnifiFirewallGroupDetails'
   }
}

function Get-UnifiFirewallGroups
{
   <#
         .SYNOPSIS
         Get a List Firewall Groups via the API of the UniFi Controller
 
         .DESCRIPTION
         Get a List Firewall Groups via the API of the Ubiquiti UniFi Controller
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .EXAMPLE
         PS C:\> Get-UnifiFirewallGroups
 
         Get a List Firewall Groups via the API of the Ubiquiti UniFi Controller
 
         .EXAMPLE
         PS C:\> Get-UnifiFirewallGroups -UnifiSite 'Contoso'
 
         Get a List Firewall Groups on Site 'Contoso' via the API of the Ubiquiti UniFi Controller
 
         .NOTES
         Initial version of the Ubiquiti UniFi Controller automation function
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([psobject])]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default'
   )

   begin
   {
      Write-Verbose -Message 'Start Get-UnifiFirewallGroups'

      # Cleanup
      $Session = $null

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      #region CheckSession
      if (-not (Get-UniFiIsAlive))
      {
         #region LoginCheckLoop
         # TODO: Move to config
         [int]$NumberOfRetries = '3'
         [int]$RetryTimer = '5'
         # Setup the Loop itself
         $RetryLoop = $false
         [int]$RetryCounter = '0'
         # Original code/idea was by Thomas Maurer
         do
         {
            try
            {
               # Try to Logout
               try
               {
                  if (-not (Get-UniFiIsAlive)) { Throw }
               }
               catch
               {
                  # We don't care about that
                  Write-Verbose -Message 'Logout failed'
               }

               # Try a Session check (login is inherited here within the helper function)
               if (-not (Get-UniFiIsAlive -ErrorAction Stop -WarningAction SilentlyContinue))
               {
                  Write-Error -Message 'Login failed' -ErrorAction Stop -Category AuthenticationError
               }

               # End the Loop
               $RetryLoop = $true
            }
            catch
            {
               if ($RetryCounter -gt $NumberOfRetries)
               {
                  Write-Warning -Message ('Could still not login, after {0} retries.' -f $NumberOfRetries)

                  # Stay in the Loop
                  $RetryLoop = $true
               }
               else
               {
                  if ($RetryCounter -eq 0)
                  {
                     Write-Warning -Message ('Could not login! Retrying in {0} seconds.' -f $RetryTimer)
                  }
                  else
                  {
                     Write-Warning -Message ('Retry {0} of {1} failed. Retrying in {2} seconds.' -f $RetryCounter, $NumberOfRetries, $RetryTimer)
                  }

                  $null = (Start-Sleep -Seconds $RetryTimer)

                  $RetryCounter = $RetryCounter + 1
               }
            }
         }
         While ($RetryLoop -eq $false)
         #endregion LoginCheckLoop
      }
      #endregion CheckSession

      #region ReCheckSession
      if (-not ($RestSession))
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         Write-Error -Message 'Unable to login! Check the connection to the controller, SSL certificates, and your credentials!' -ErrorAction Stop -Category AuthenticationError

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion ReCheckSession
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'
         $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/list/firewallgroup'
         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region Request
         Write-Verbose -Message 'Send the Request'
         $paramInvokeRestMethod = @{
            Method        = 'Get'
            Uri           = $ApiRequestUri
            Headers       = $RestHeader
            ErrorAction   = 'SilentlyContinue'
            WarningAction = 'SilentlyContinue'
            WebSession    = $RestSession
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)
         Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"
         Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         #endregion Request
      }
      catch
      {
         # Try to Logout
         try
         {
            $null = (Invoke-UniFiApiLogout -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            # We don't care about that
            Write-Verbose -Message 'Logout failed'
         }

         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust

         #region RestoreProgressPreference
         $ProgressPreference = $ExistingProgressPreference
         #endregion RestoreProgressPreference
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber
         Write-Verbose -Message ('Error was in Line {0}' -f $line)
         Write-Verbose -Message ('Error was {0}' -f $Session.meta.rc)

         # Error Message
         Write-Error -Message 'Unable to Login' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end
   {
      # Dump the Result
      $Session.data

      # Cleanup
      $Session = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Done Get-UnifiFirewallGroups'
   }
}

function Get-UnifiNetworkDetails
{
   <#
         .SYNOPSIS
         Get the details about one network via the API of the UniFi Controller
 
         .DESCRIPTION
         Get the details about one network via the API of the UniFi Controller
 
         .PARAMETER Id
         The ID (network_id) of the network you would like to get detaild information about. Multiple values are supported.
 
         .PARAMETER Name
         The Name (not the ID/network_id) of the network you would like to get detaild information about. Multiple values are supported.
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .EXAMPLE
         PS C:\> Get-UnifiNetworkDetails -id 'ba7e58be13574ef4881a79c3'
 
         Get the details about the network with ID ba7e58be13574ef4881a79c3 via the API of the UniFi Controller
 
         .EXAMPLE
         Get-UnifiNetworkDetails -UnifiNetwork 'ba7e58be13574ef4881a79c3'
 
         Same as above, with the legacy parameter alias used.
 
         .EXAMPLE
         PS C:\> Get-UnifiNetworkDetails -name 'JoshHome'
 
         Get the details about the network JoshHome via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Get-UnifiNetworkDetails -name 'JoshHome', 'JohnHome'
 
         Get the details about the networks JoshHome and JohnHome via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Get-UnifiNetworkDetails -id 'ba7e58be13574ef4881a79c3', '2437bdf7fdf04f1a96c0fd32'
 
         Get the details about the networks with IDs ba7e58be13574ef4881a79c3 and 2437bdf7fdf04f1a96c0fd32 via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Get-UnifiNetworkDetails -id 'ba7e58be13574ef4881a79c3' -UnifiSite 'Contoso'
 
         Get the details about the network with ID ba7e58be13574ef4881a79c3 on Site 'Contoso' via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Get-UnifiNetworkDetails -name 'JoshHome' -UnifiSite 'Contoso'
 
         Get the details about the network JoshHome on Site 'Contoso' via the API of the UniFi Controller
 
         .NOTES
         The parameter UnifiNetwork is now an Alias.
         If the UnifiNetwork parameter is used, it must(!) be the ID (network_id). This was necessary to make it a non breaking change.
 
         .LINK
         Get-UnifiNetworkList
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([psobject])]
   param
   (
      [Parameter(ParameterSetName = 'Request by Id',Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 0,
      HelpMessage = 'The ID (network_id) of the network you would like to get detaild information about.')]
      [ValidateNotNullOrEmpty()]
      [Alias('UnifiNetwork', 'UnifiNetworkId', 'NetworkId')]
      [string[]]
      $Id,
      [Parameter(ParameterSetName = 'Request by Name', Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 0,
      HelpMessage = 'The Name (not the ID/network_id) of the network you would like to get detaild information about.')]
      [ValidateNotNullOrEmpty()]
      [Alias('UnifiNetworkName', 'NetworkName')]
      [string[]]
      $Name,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 1)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default'
   )

   begin
   {
      Write-Verbose -Message 'Start Get-UnifiNetworkDetails'

      # Cleanup
      $Session = $null

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      #region CheckSession
      if (-not (Get-UniFiIsAlive))
      {
         #region LoginCheckLoop
         # TODO: Move to config
         [int]$NumberOfRetries = '3'
         [int]$RetryTimer = '5'
         # Setup the Loop itself
         $RetryLoop = $false
         [int]$RetryCounter = '0'
         # Original code/idea was by Thomas Maurer
         do
         {
            try
            {
               # Try to Logout
               try
               {
                  if (-not (Get-UniFiIsAlive)) { Throw }
               }
               catch
               {
                  # We don't care about that
                  Write-Verbose -Message 'Logout failed'
               }

               # Try a Session check (login is inherited here within the helper function)
               if (-not (Get-UniFiIsAlive -ErrorAction Stop -WarningAction SilentlyContinue))
               {
                  Write-Error -Message 'Login failed' -ErrorAction Stop -Category AuthenticationError
               }

               # End the Loop
               $RetryLoop = $true
            }
            catch
            {
               if ($RetryCounter -gt $NumberOfRetries)
               {
                  Write-Warning -Message ('Could still not login, after {0} retries.' -f $NumberOfRetries)

                  # Stay in the Loop
                  $RetryLoop = $true
               }
               else
               {
                  if ($RetryCounter -eq 0)
                  {
                     Write-Warning -Message ('Could not login! Retrying in {0} seconds.' -f $RetryTimer)
                  }
                  else
                  {
                     Write-Warning -Message ('Retry {0} of {1} failed. Retrying in {2} seconds.' -f $RetryCounter, $NumberOfRetries, $RetryTimer)
                  }

                  $null = (Start-Sleep -Seconds $RetryTimer)

                  $RetryCounter = $RetryCounter + 1
               }
            }
         }
         While ($RetryLoop -eq $false)
         #endregion LoginCheckLoop
      }
      #endregion CheckSession

      #region ReCheckSession
      if (-not ($RestSession))
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         Write-Error -Message 'Unable to login! Check the connection to the controller, SSL certificates, and your credentials!' -ErrorAction Stop -Category AuthenticationError

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion ReCheckSession

      # Create a new Object
      $SessionData = @()
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         switch ($PsCmdlet.ParameterSetName)
         {
            'Request by Name'
            {
               foreach ($SingleName in $Name)
               {
                  # Cleanup
                  $Session = $null

                  Write-Verbose -Message 'Create the Request URI'

                  $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/rest/networkconf/'

                  Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)

                  Write-Verbose -Message 'Send the Request'

                  $paramInvokeRestMethod = @{
                     Method        = 'Get'
                     Uri           = $ApiRequestUri
                     Headers       = $RestHeader
                     ErrorAction   = 'SilentlyContinue'
                     WarningAction = 'SilentlyContinue'
                     WebSession    = $RestSession
                  }
                  $Session = (Invoke-RestMethod @paramInvokeRestMethod)

                  Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"
                  Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"

                  # check result
                  if ($Session.meta.rc -ne 'ok')
                  {
                     # Error Message
                     Write-Error -Message 'Unable to Login' -ErrorAction Stop

                     # Only here to catch a global ErrorAction overwrite
                     break
                  }
                  elseif (-not ($Session.data))
                  {
                     # Error Message for a possible Not found
                     Write-Error -Message 'No Data - Possible Reason: Not found' -Category ObjectNotFound -ErrorAction Stop

                     # Only here to catch a global ErrorAction overwrite
                     break
                  }
                  $Session = $Session.data | Where-Object {
                     $_.name -eq $SingleName
                  }
                  $SessionData = $SessionData + $Session
               }
            }
            'Request by Id'
            {
               foreach ($SingleId in $Id)
               {
                  # Cleanup
                  $Session = $null

                  Write-Verbose -Message 'Create the Request URI'

                  $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/rest/networkconf/' + $SingleId

                  Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)

                  Write-Verbose -Message 'Send the Request'

                  $paramInvokeRestMethod = @{
                     Method        = 'Get'
                     Uri           = $ApiRequestUri
                     Headers       = $RestHeader
                     ErrorAction   = 'SilentlyContinue'
                     WarningAction = 'SilentlyContinue'
                     WebSession    = $RestSession
                  }
                  $Session = (Invoke-RestMethod @paramInvokeRestMethod)

                  Write-Verbose -Message ('Session Info: {0}' -f $Session)

                  # check result
                  if ($Session.meta.rc -ne 'ok')
                  {
                     # Error Message
                     Write-Error -Message 'Unable to Login' -ErrorAction Stop

                     # Only here to catch a global ErrorAction overwrite
                     break
                  }
                  elseif (-not ($Session.data))
                  {
                     # Error Message for a possible Not found
                     Write-Error -Message 'No Data - Possible Reason: Not found' -Category ObjectNotFound -ErrorAction Stop

                     # Only here to catch a global ErrorAction overwrite
                     break
                  }
                  $SessionData = $SessionData + $Session.data
               }
            }
         }
      }
      catch
      {
         # Try to Logout
         try
         {
            $null = (Invoke-UniFiApiLogout -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            # We don't care about that
            Write-Verbose -Message 'Logout failed'
         }

         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust

         #region RestoreProgressPreference
         $ProgressPreference = $ExistingProgressPreference
         #endregion RestoreProgressPreference
      }
   }

   end
   {
      # Dump the Result
      $SessionData

      # Cleanup
      $SessionData = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Start Get-UnifiNetworkDetails'
   }
}

function Get-UnifiNetworkList
{
   <#
         .SYNOPSIS
         Get a List Networks via the API of the UniFi Controller
 
         .DESCRIPTION
         Get a List Networks via the API of the Ubiquiti UniFi Controller
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .EXAMPLE
         PS C:\> Get-UnifiNetworkList
 
         Get a List Networks via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Get-UnifiNetworkList -UnifiSite 'Contoso'
 
         Get a List Networks on Site 'Contoso' via the API of the UniFi Controller
 
         .NOTES
         Initial version of the Ubiquiti UniFi Controller automation function
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([psobject])]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default'
   )

   begin
   {
      Write-Verbose -Message 'Start Get-UnifiNetworkList'

      # Cleanup
      $Session = $null

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      #region CheckSession
      if (-not (Get-UniFiIsAlive))
      {
         #region LoginCheckLoop
         # TODO: Move to config
         [int]$NumberOfRetries = '3'
         [int]$RetryTimer = '5'
         # Setup the Loop itself
         $RetryLoop = $false
         [int]$RetryCounter = '0'
         # Original code/idea was by Thomas Maurer
         do
         {
            try
            {
               # Try to Logout
               try
               {
                  if (-not (Get-UniFiIsAlive)) { Throw }
               }
               catch
               {
                  # We don't care about that
                  Write-Verbose -Message 'Logout failed'
               }

               # Try a Session check (login is inherited here within the helper function)
               if (-not (Get-UniFiIsAlive -ErrorAction Stop -WarningAction SilentlyContinue))
               {
                  Write-Error -Message 'Login failed' -ErrorAction Stop -Category AuthenticationError
               }

               # End the Loop
               $RetryLoop = $true
            }
            catch
            {
               if ($RetryCounter -gt $NumberOfRetries)
               {
                  Write-Warning -Message ('Could still not login, after {0} retries.' -f $NumberOfRetries)

                  # Stay in the Loop
                  $RetryLoop = $true
               }
               else
               {
                  if ($RetryCounter -eq 0)
                  {
                     Write-Warning -Message ('Could not login! Retrying in {0} seconds.' -f $RetryTimer)
                  }
                  else
                  {
                     Write-Warning -Message ('Retry {0} of {1} failed. Retrying in {2} seconds.' -f $RetryCounter, $NumberOfRetries, $RetryTimer)
                  }

                  $null = (Start-Sleep -Seconds $RetryTimer)

                  $RetryCounter = $RetryCounter + 1
               }
            }
         }
         While ($RetryLoop -eq $false)
         #endregion LoginCheckLoop
      }
      #endregion CheckSession

      #region ReCheckSession
      if (-not ($RestSession))
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         Write-Error -Message 'Unable to login! Check the connection to the controller, SSL certificates, and your credentials!' -ErrorAction Stop -Category AuthenticationError

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion ReCheckSession
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'

         $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/rest/networkconf/'

         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region Request
         Write-Verbose -Message 'Send the Request'

         $paramInvokeRestMethod = @{
            Method        = 'Get'
            Uri           = $ApiRequestUri
            Headers       = $RestHeader
            ErrorAction   = 'SilentlyContinue'
            WarningAction = 'SilentlyContinue'
            WebSession    = $RestSession
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)

         Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"
         Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         #endregion Request
      }
      catch
      {
         # Try to Logout
         try
         {
            $null = (Invoke-UniFiApiLogout -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            # We don't care about that
            Write-Verbose -Message 'Logout failed'
         }

         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust

         #region RestoreProgressPreference
         $ProgressPreference = $ExistingProgressPreference
         #endregion RestoreProgressPreference
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber

         Write-Verbose -Message ('Error was in Line {0}' -f $line)
         Write-Verbose -Message ('Error was {0}' -f $Session.meta.rc)

         # Error Message
         Write-Error -Message 'Unable to get the network list' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end
   {
      # Dump the Result
      $Session.data

      # Cleanup
      $Session = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Start Get-UnifiNetworkList'
   }
}

function Get-UnifiSpeedTestResult
{
   <#
         .SYNOPSIS
         Get the UniFi Security Gateway (USG) Speed Test results
 
         .DESCRIPTION
         Get the UniFi Security Gateway (USG) Speed Test results
 
         .PARAMETER Timeframe
         Timeframe in hours, default is 24
 
         .PARAMETER StartDate
         Start date (valid Date String)
         Default is now
 
         .PARAMETER EndDate
         End date (valid Date String), default is now minus 24 hours
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .PARAMETER all
         Get all existing Speed Test Results
 
         .PARAMETER UniFiValues
         Show results without modifications, like the UniFi Controller creates them
 
         .PARAMETER last
         Only test latest Speed Test Result will be displayed
 
         .EXAMPLE
         PS C:\> Get-UnifiSpeedTestResult -last
 
         Only test latest Speed Test Result will be displayed
 
         .EXAMPLE
         PS C:\> Get-UnifiSpeedTestResult -all
 
         Get all the UniFi Security Gateway (USG) Speed Test results
 
         .EXAMPLE
         PS C:\> Get-UnifiSpeedTestResult -all | Sort-Object -Property time
 
         Get all the UniFi Security Gateway (USG) Speed Test results, sorted by date
 
         .EXAMPLE
         PS C:\> Get-UnifiSpeedTestResult | Select-Object -Property *
 
         Get the UniFi Security Gateway (USG) Speed Test results from the last 24 hours (default), returns all values
 
         .EXAMPLE
         PS C:\> Get-UnifiSpeedTestResult -UnifiSite 'Contoso'
 
         Get the UniFi Security Gateway (USG) Speed Test results from the last 24 hours (default)
 
         .EXAMPLE
         PS C:\> Get-UnifiSpeedTestResult -Timeframe 48
 
         Get the UniFi Security Gateway (USG) Speed Test results of the last 48 hours
 
         .EXAMPLE
         PS C:\> Get-UnifiSpeedTestResult -StartDate '1/16/2019 12:00 AM' -EndDate '1/16/2019 11:59:59 PM'
 
         Get the UniFi Security Gateway (USG) Speed Test results for a given time/date
         In the example, all results from 1/16/2019 (all day) will be returned
 
         .NOTES
         Initial version that makes it more human readable.
         The filetring needs a few more tests
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
 
         .LINK
         ConvertFrom-UnixTimeStamp
 
         .LINK
         ConvertTo-UnixTimeStamp
   #>
   [CmdletBinding(DefaultParameterSetName = 'DateSet',ConfirmImpact = 'None')]
   [OutputType([psobject])]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [Alias('Start')]
      [datetime]
      $StartDate,
      [Parameter(ParameterSetName = 'TimeFrameSet',
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 1)]
      [Alias('hours')]
      [int]
      $Timeframe,
      [Parameter(ParameterSetName = 'DateSet',
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 1)]
      [ValidateNotNullOrEmpty()]
      [datetime]
      $EndDate = (Get-Date),
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 2)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default',
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 3)]
      [switch]
      $all = $false,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 4)]
      [switch]
      $UniFiValues = $false,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 4)]
      [switch]
      $last = $false
   )

   begin
   {
      Write-Verbose -Message 'Start Get-UnifiSpeedTestResult'

      # Cleanup
      $Session = $null

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      #region CheckSession
      if (-not (Get-UniFiIsAlive))
      {
         #region LoginCheckLoop
         # TODO: Move to config
         [int]$NumberOfRetries = '3'
         [int]$RetryTimer = '5'
         # Setup the Loop itself
         $RetryLoop = $false
         [int]$RetryCounter = '0'
         # Original code/idea was by Thomas Maurer
         do
         {
            try
            {
               # Try to Logout
               try
               {
                  if (-not (Get-UniFiIsAlive))
                  {
                     Throw
                  }
               }
               catch
               {
                  # We don't care about that
                  Write-Verbose -Message 'Logout failed'
               }

               # Try a Session check (login is inherited here within the helper function)
               if (-not (Get-UniFiIsAlive -ErrorAction Stop -WarningAction SilentlyContinue))
               {
                  Write-Error -Message 'Login failed' -ErrorAction Stop -Category AuthenticationError
               }

               # End the Loop
               $RetryLoop = $true
            }
            catch
            {
               if ($RetryCounter -gt $NumberOfRetries)
               {
                  Write-Warning -Message ('Could still not login, after {0} retries.' -f $NumberOfRetries)

                  # Stay in the Loop
                  $RetryLoop = $true
               }
               else
               {
                  if ($RetryCounter -eq 0)
                  {
                     Write-Warning -Message ('Could not login! Retrying in {0} seconds.' -f $RetryTimer)
                  }
                  else
                  {
                     Write-Warning -Message ('Retry {0} of {1} failed. Retrying in {2} seconds.' -f $RetryCounter, $NumberOfRetries, $RetryTimer)
                  }

                  $null = (Start-Sleep -Seconds $RetryTimer)

                  $RetryCounter = $RetryCounter + 1
               }
            }
         }
         While ($RetryLoop -eq $false)
         #endregion LoginCheckLoop
      }
      #endregion CheckSession

      #region ReCheckSession
      if (-not ($RestSession))
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         Write-Error -Message 'Unable to login! Check the connection to the controller, SSL certificates, and your credentials!' -ErrorAction Stop -Category AuthenticationError

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion ReCheckSession

      #region ConfigureDefaultDisplaySet
      $defaultDisplaySet = 'time', 'download', 'upload', 'latency'

      # Create the default property display set
      $defaultDisplayPropertySet = (New-Object -TypeName System.Management.Automation.PSPropertySet -ArgumentList ('DefaultDisplayPropertySet', [string[]]$defaultDisplaySet))
      $PSStandardMembers = [Management.Automation.PSMemberInfo[]]@($defaultDisplayPropertySet)
      #endregion ConfigureDefaultDisplaySet

      #region Filtering
      switch ($PsCmdlet.ParameterSetName)
      {
         'TimeFrameSet'
         {
            Write-Verbose -Message 'TimeFrameSet'
            if (-not ($StartDate))
            {
               if ($Timeframe)
               {
                  $StartDate = ((Get-Date).AddHours(-$Timeframe))
               }
               else
               {
                  $StartDate = ((Get-Date).AddDays(-1))
               }
            }

            if (-not ($EndDate))
            {
               $EndDate = (Get-Date)
            }
         }
         'DateSet'
         {
            Write-Verbose -Message 'DateSet'
            if (-not ($StartDate))
            {
               $StartDate = ((Get-Date).AddDays(-1))
            }

            if (-not ($EndDate))
            {
               $EndDate = (Get-Date)
            }
         }
      }

      [string]$FilterStartDate = (ConvertTo-UnixTimestamp -Date $StartDate -Milliseconds)
      [string]$FilterEndDate = (ConvertTo-UnixTimestamp -Date $EndDate -Milliseconds)

      if (($all) -or ($last))
      {
         $FilterStartDate = $null
         $FilterEndDate = $null
      }
      #endregion Filtering
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'

         $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/stat/report/archive.speedtest'

         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region ApiRequestBodyInput
         $Script:ApiRequestBodyInput = [PSCustomObject][ordered]@{
            attrs = @(
               'xput_download',
               'xput_upload',
               'latency',
               'time'
            )
            start = $FilterStartDate
            end   = $FilterEndDate
         }
         #endregion ApiRequestBodyInput

         #region ApiRequestBody
         $paramConvertToJson = @{
            InputObject   = $ApiRequestBodyInput
            Depth         = 5
            ErrorAction   = 'Stop'
            WarningAction = 'SilentlyContinue'
         }

         $ApiRequestBodyInput = $null

         $Script:ApiRequestBody = (ConvertTo-Json @paramConvertToJson)
         #endregion ApiRequestBody

         #region Request
         Write-Verbose -Message 'Send the Request'

         $paramInvokeRestMethod = @{
            Method        = 'Post'
            Uri           = $ApiRequestUri
            Headers       = $RestHeader
            Body          = $ApiRequestBody
            ErrorAction   = 'SilentlyContinue'
            WarningAction = 'SilentlyContinue'
            WebSession    = $RestSession
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)

         Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"
         Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         #endregion Request
      }
      catch
      {
         # Try to Logout
         try
         {
            $null = (Invoke-UniFiApiLogout -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            # We don't care about that
            Write-Verbose -Message 'Logout failed'
         }

         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber
         Write-Verbose -Message ('Error was in Line {0}' -f $line)
         Write-Verbose -Message ('Error was {0}' -f $Session.meta.rc)

         # Error Message
         Write-Error -Message 'Unable to Login' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }

      $Result = @()

      foreach ($item in $Session.data)
      {
         $Object = $null
         $Object = [PSCustomObject][ordered]@{
            id       = $item._id
            latency  = $item.latency
            oid      = $item.oid
            time     = if ($UniFiValues)
            {
               $item.time
            }
            else
            {
               ConvertFrom-UnixTimeStamp -TimeStamp ($item.time) -Milliseconds
            }
            download = if ($UniFiValues)
            {
               $item.xput_download
            }
            else
            {
               [math]::Round($item.xput_download,1)
            }
            upload   = if ($UniFiValues)
            {
               $item.xput_upload
            }
            else
            {
               [math]::Round($item.xput_upload,1)
            }
         }
         $Result = ($Result + $Object)
      }

      # Give this object a unique typename
      $null = ($Result.PSObject.TypeNames.Insert(0,'Speedtest.Result'))
      $null = ($Result | Add-Member MemberSet PSStandardMembers $PSStandardMembers)

      #region IfLast
      if ($last)
      {
         $Result = ($Result | Sort-Object -Property time | Select-Object -Last 1)
      }
      #endregion IfLast

   }

   end
   {
      # Dump the Result
      $Result

      # Cleanup
      $Session = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Start Get-UnifiSpeedTestResult'
   }
}

function Invoke-UniFiApiLogin
{
   <#
         .SYNOPSIS
         Login to API of the UniFi Controller
 
         .DESCRIPTION
         Login to API of the Ubiquiti UniFi Controller
 
         .EXAMPLE
         PS C:\> Invoke-UniFiApiLogin
 
         Login to API of the Ubiquiti UniFi Controller
 
         .NOTES
         Initial version of the Ubiquiti UniFi Controller automation function
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Get-UniFiCredentials
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogout
   #>
   [CmdletBinding(ConfirmImpact = 'None')]
   param ()

   begin
   {
      Write-Verbose -Message 'Start Invoke-UniFiApiLogin'

      # Cleanup
      $RestSession = $null
      $Session = $null

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region ReadCredentials
         Write-Verbose -Message 'Read the Credentials'
         $null = (Get-UniFiCredentials)
         #endregion

         #region
         Write-Verbose -Message 'Create the Body'
         $null = (Set-UniFiApiLoginBody)
         #endregion

         #region Cleanup
         # Cleanup
         $Session = $null

         Write-Verbose -Message 'Cleanup the credentials variables'

         $ApiUsername = $null
         $ApiPassword = $null
         #endregion Cleanup

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'

         $ApiRequestUri = $ApiUri + 'login'

         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region Request
         Write-Verbose -Message 'Send the Request to Login'

         $paramInvokeRestMethod = @{
            Method          = 'Post'
            Uri             = $ApiRequestUri
            Headers         = $RestHeader
            Body            = $JsonBody
            ErrorAction     = 'SilentlyContinue'
            WarningAction   = 'SilentlyContinue'
            SessionVariable = 'RestSession'
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)

         Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"

         if ($Session.data)
         {
            Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         }

         $Global:RestSession = $RestSession

         # Remove the Body variable
         $JsonBody = $null
         #endregion Request
      }
      catch
      {
         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         # Remove the Body variable
         $JsonBody = $null

         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber
         Write-Verbose -Message ('Error was in Line {0}' -f $line)
         Write-Verbose -Message ('Error was {0}' -f $Session.meta.rc)

         # Error Message
         Write-Error -Message 'Unable to Login' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end
   {
      # Cleanup
      $Session = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Done Invoke-UniFiApiLogin'
   }
}

function Invoke-UniFiApiLogout
{
   <#
         .SYNOPSIS
         Logout from the API of the UniFi Controller
 
         .DESCRIPTION
         Logout from the API of the Ubiquiti UniFi Controller
 
         .EXAMPLE
 
         PS C:\> Invoke-UniFiApiLogout
 
         Logout from the API of the Ubiquiti UniFi Controller
 
         .NOTES
         Initial version of the Ubiquiti UniFi Controller automation function
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
   #>
   [CmdletBinding(ConfirmImpact = 'None')]
   param ()

   begin
   {
      Write-Verbose -Message 'Start Invoke-UniFiApiLogout'

      # Cleanup
      $Session = $null

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'

         $ApiRequestUri = $ApiUri + 'logout'

         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region Request
         Write-Verbose -Message 'Send the Request to Login'

         $paramInvokeRestMethod = @{
            Method        = 'Post'
            Uri           = $ApiRequestUri
            ErrorAction   = 'SilentlyContinue'
            WarningAction = 'SilentlyContinue'
            WebSession    = $RestSession
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)

         Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"

         if ($Session.data)
         {
            Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         }
         #region Request
      }
      catch
      {
         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         # Remove the Body variable
         $JsonBody = $null

         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber
         Write-Verbose -Message ('Error was in Line {0}' -f $line)
         Write-Verbose -Message ('Error was {0}' -f $Session.meta.rc)

         # Error Message
         Write-Error -Message 'Unable to Login' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end
   {
      # Cleanup
      $Session = $null
      $RestSession = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Start Invoke-UniFiApiLogout'
   }
}

function Invoke-UnifiAuthorizeGuest
{
   <#
         .SYNOPSIS
         Authorize a client device via the API of the UniFi Controller
 
         .DESCRIPTION
         Authorize a client device via the API of the Ubiquiti UniFi Controller
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .PARAMETER Mac
         Client MAC address
 
         .PARAMETER Minutes
         Minutes (from now) until authorization expires, the default is 60 (1 hour)
 
         .PARAMETER Up
         Upload speed limit in Kilobit per second (kbit/s)
 
         .PARAMETER Down
         Download speed limit in Kilobit per second (kbit/s)
 
         .PARAMETER Limit
         Data transfer limit in megabytes (MB), upload and download will be combined.
         The default is unlimited
 
         .PARAMETER AccessPoint
         MAC address of the Access Point to which client is connected, should result in a much faster authorization
 
         .EXAMPLE
         PS C:\> Invoke-UnifiAuthorizeGuest -Mac '84:3a:4b:cd:88:2D'
 
         Authorize a client device via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Invoke-UnifiAuthorizeGuest -Mac '84:3a:4b:cd:88:2D' -AccessPoint '788a2059c699'
 
         Authorize a client device via the API of the UniFi Controller, it used the AccessPoint with the Mac address 78:8a:20:59:c6:99 directly for a faster authorization
 
         .EXAMPLE
         PS C:\> Invoke-UnifiAuthorizeGuest -Mac '843a4bcd882D' -Minutes 180
 
         Authorize a client device for 180 minutes via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Invoke-UnifiAuthorizeGuest -Mac '843a4bcd882D' -Up 1024 -Down 2048
 
         Authorize a client device with a restriction of 1024 kbit/s upload rate and 2048 kbit/s download rate via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Invoke-UnifiAuthorizeGuest -Mac '843a4bcd882D' -Limit 102400
 
         Authorize a client device with a limitation of via 102400 megabytes of traffic (combined) the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Invoke-UnifiAuthorizeGuest '84-3a-4b-cd-88-2D' -UnifiSite 'Contoso'
 
         Authorize a client device on site 'Contoso' via the API of the UniFi Controller (The function will normalize the MAC Address for us)
 
         .NOTES
         Initial version of the Ubiquiti UniFi Controller automation function
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([bool])]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default',
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 1,
      HelpMessage = 'Client MAC address')]
      [ValidateNotNullOrEmpty()]
      [Alias('UniFiMac', 'MacAddress')]
      [string]
      $Mac,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 2)]
      [Alias('UniFiMinutes')]
      [int]
      $Minutes = 60,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 3)]
      [Alias('UniFiUp')]
      [int]
      $Up = $null,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 4)]
      [int]
      $Down = $null,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 5)]
      [Alias('MBytes', 'UniFiLimit', 'UniFiMBytes')]
      [int]
      $Limit = $null,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 6)]
      [Alias('UniFiAccessPoint', 'ApMac', 'UniFiApMac', 'ap_mac')]
      [string]
      $AccessPoint = $null
   )

   begin
   {
      Write-Verbose -Message 'Start Invoke-UnifiAuthorizeGuest'

      # Cleanup
      $Session = $null

      #region MacHandler
      <#
            Make sure we have the right format
      #>
      $regex = '((\d|([a-f]|[A-F])){2}){6}'
      [string]$Mac = $Mac.Trim().Replace(':', '').Replace('.', '').Replace('-', '')
      if (($Mac.Length -eq 12) -and ($Mac -match $regex))
      {
         [string]$Mac = ($Mac -replace '..(?!$)', '$&:')
      }
      else
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber

         Write-Verbose -Message ('Error was in Line {0}' -f $line)

         # Error Message
         Write-Error -Message ('Sorry, but {0} is a format that the UniFi Controller will nor understand' -f $Mac) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion MacHandler

      #region AccessPointMacHandler
      <#
            Make sure we have the right format
      #>
      if ($AccessPoint)
      {
         $regex = '((\d|([a-f]|[A-F])){2}){6}'
         [string]$AccessPoint = $AccessPoint.Trim().Replace(':', '').Replace('.', '').Replace('-', '')
         if (($AccessPoint.Length -eq 12) -and ($AccessPoint -match $regex))
         {
            [string]$AccessPoint = ($AccessPoint -replace '..(?!$)', '$&:')
         }
         else
         {
            # Verbose stuff
            $Script:line = $_.InvocationInfo.ScriptLineNumber

            Write-Verbose -Message ('Error was in Line {0}' -f $line)

            # Error Message
            Write-Error -Message ('Sorry, but {0} is a format that the UniFi Controller will nor understand' -f $AccessPoint) -ErrorAction Stop

            # Only here to catch a global ErrorAction overwrite
            break
         }
      }
      #endregion AccessPointMacHandler

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      #region CheckSession
      if (-not (Get-UniFiIsAlive))
      {
         #region LoginCheckLoop
         # TODO: Move to config
         [int]$NumberOfRetries = '3'
         [int]$RetryTimer = '5'
         # Setup the Loop itself
         $RetryLoop = $false
         [int]$RetryCounter = '0'
         # Original code/idea was by Thomas Maurer
         do
         {
            try
            {
               # Try to Logout
               try
               {
                  if (-not (Get-UniFiIsAlive))
                  {
                     throw
                  }
               }
               catch
               {
                  # We don't care about that
                  Write-Verbose -Message 'Logout failed'
               }

               # Try a Session check (login is inherited here within the helper function)
               if (-not (Get-UniFiIsAlive -ErrorAction Stop -WarningAction SilentlyContinue))
               {
                  Write-Error -Message 'Login failed' -ErrorAction Stop -Category AuthenticationError
               }

               # End the Loop
               $RetryLoop = $true
            }
            catch
            {
               if ($RetryCounter -gt $NumberOfRetries)
               {
                  Write-Warning -Message ('Could still not login, after {0} retries.' -f $NumberOfRetries)

                  # Stay in the Loop
                  $RetryLoop = $true
               }
               else
               {
                  if ($RetryCounter -eq 0)
                  {
                     Write-Warning -Message ('Could not login! Retrying in {0} seconds.' -f $RetryTimer)
                  }
                  else
                  {
                     Write-Warning -Message ('Retry {0} of {1} failed. Retrying in {2} seconds.' -f $RetryCounter, $NumberOfRetries, $RetryTimer)
                  }

                  $null = (Start-Sleep -Seconds $RetryTimer)

                  $RetryCounter = $RetryCounter + 1
               }
            }
         }
         while ($RetryLoop -eq $false)
         #endregion LoginCheckLoop
      }
      #endregion CheckSession

      #region ReCheckSession
      if (-not ($RestSession))
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         Write-Error -Message 'Unable to login! Check the connection to the controller, SSL certificates, and your credentials!' -ErrorAction Stop -Category AuthenticationError

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion ReCheckSession

      #region ApiRequestBodyInput
      $Script:ApiRequestBodyInput = [PSCustomObject][ordered]@{
         cmd     = 'authorize-guest'
         mac     = $Mac
         minutes = $Minutes
      }

      if ($Up)
      {
         Write-Verbose -Message ('Add upload speed limit: {0}' -f $Up)
         $ApiRequestBodyInput | Add-Member -MemberType NoteProperty -Name up -Value $Up -Force
      }

      if ($Down)
      {
         Write-Verbose -Message ('Add download speed limit: {0}' -f $Down)
         $ApiRequestBodyInput | Add-Member -MemberType NoteProperty -Name down -Value $Down -Force
      }

      if ($Limit)
      {
         Write-Verbose -Message ('Add data transfer limit: {0}' -f $Limit)
         $ApiRequestBodyInput | Add-Member -MemberType NoteProperty -Name bytes -Value $Limit -Force
      }

      if ($AccessPoint)
      {
         Write-Verbose -Message ('Use AP MAC address: {0}' -f $AccessPoint)
         $ApiRequestBodyInput | Add-Member -MemberType NoteProperty -Name ap_mac -Value $AccessPoint -Force
      }
      #endregion ApiRequestBodyInput
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'

         $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/cmd/stamgr'

         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region ApiRequestBody
         $paramConvertToJson = @{
            InputObject   = $ApiRequestBodyInput
            Depth         = 5
            ErrorAction   = 'Stop'
            WarningAction = 'SilentlyContinue'
         }

         $ApiRequestBodyInput = $null

         $Script:ApiRequestBody = (ConvertTo-Json @paramConvertToJson)
         #endregion ApiRequestBody

         #region Request
         Write-Verbose -Message 'Send the Request'

         $paramInvokeRestMethod = @{
            Method        = 'Post'
            Uri           = $ApiRequestUri
            Headers       = $RestHeader
            Body          = $ApiRequestBody
            ErrorAction   = 'SilentlyContinue'
            WarningAction = 'SilentlyContinue'
            WebSession    = $RestSession
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)

         Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"

         if ($Session.data)
         {
            Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
            $Result = $true
         }
         else
         {
            $Result = $false
         }
         #endregion Request
      }
      catch
      {
         # Try to Logout
         try
         {
            $null = (Invoke-UniFiApiLogout -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            # We don't care about that
            Write-Verbose -Message 'Logout failed'
         }

         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust

         #region RestoreProgressPreference
         $ProgressPreference = $ExistingProgressPreference
         #endregion RestoreProgressPreference
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber

         Write-Verbose -Message ('Error was in Line {0}' -f $line)
         Write-Verbose -Message ('Error was {0}' -f $Session.meta.rc)

         # Error Message
         Write-Error -Message 'Unable to get the network list' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end
   {
      # Dump the Result
      Write-Output -InputObject $true

      # Cleanup
      $Session = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Start Invoke-UnifiAuthorizeGuest'
   }
}

function Invoke-UnifiBlockClient
{
   <#
         .SYNOPSIS
         Block a client device via the API of the UniFi Controller
 
         .DESCRIPTION
         Block a client device via the API of the Ubiquiti UniFi Controller
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .PARAMETER Mac
         Client MAC address
 
         .EXAMPLE
         PS C:\> Invoke-UnifiBlockClient -Mac '84:3a:4b:cd:88:2D'
 
         Block a client device via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Invoke-UnifiBlockClient -Mac '84:3a:4b:cd:88:2D' -UnifiSite 'Contoso'
 
         Block a client device on Site 'Contoso' via the API of the UniFi Controller
 
         .NOTES
         Initial version of the Ubiquiti UniFi Controller automation function
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([bool])]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default',
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 1,
      HelpMessage = 'Client MAC address')]
      [ValidateNotNullOrEmpty()]
      [Alias('UniFiMac', 'MacAddress')]
      [string]
      $Mac
   )

   begin
   {
      Write-Verbose -Message 'Start Invoke-UnifiBlockClient'

      # Cleanup
      $Session = $null

      #region MacHandler
      $Mac = $Mac.ToLower()
      #endregion MacHandler

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      #region CheckSession
      if (-not (Get-UniFiIsAlive))
      {
         #region LoginCheckLoop
         # TODO: Move to config
         [int]$NumberOfRetries = '3'
         [int]$RetryTimer = '5'
         # Setup the Loop itself
         $RetryLoop = $false
         [int]$RetryCounter = '0'
         # Original code/idea was by Thomas Maurer
         do
         {
            try
            {
               # Try to Logout
               try
               {
                  if (-not (Get-UniFiIsAlive))
                  {
                     throw
                  }
               }
               catch
               {
                  # We don't care about that
                  Write-Verbose -Message 'Logout failed'
               }

               # Try a Session check (login is inherited here within the helper function)
               if (-not (Get-UniFiIsAlive -ErrorAction Stop -WarningAction SilentlyContinue))
               {
                  Write-Error -Message 'Login failed' -ErrorAction Stop -Category AuthenticationError
               }

               # End the Loop
               $RetryLoop = $true
            }
            catch
            {
               if ($RetryCounter -gt $NumberOfRetries)
               {
                  Write-Warning -Message ('Could still not login, after {0} retries.' -f $NumberOfRetries)

                  # Stay in the Loop
                  $RetryLoop = $true
               }
               else
               {
                  if ($RetryCounter -eq 0)
                  {
                     Write-Warning -Message ('Could not login! Retrying in {0} seconds.' -f $RetryTimer)
                  }
                  else
                  {
                     Write-Warning -Message ('Retry {0} of {1} failed. Retrying in {2} seconds.' -f $RetryCounter, $NumberOfRetries, $RetryTimer)
                  }

                  $null = (Start-Sleep -Seconds $RetryTimer)

                  $RetryCounter = $RetryCounter + 1
               }
            }
         }
         while ($RetryLoop -eq $false)
         #endregion LoginCheckLoop
      }
      #endregion CheckSession

      #region ReCheckSession
      if (-not ($RestSession))
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         Write-Error -Message 'Unable to login! Check the connection to the controller, SSL certificates, and your credentials!' -ErrorAction Stop -Category AuthenticationError

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion ReCheckSession

      #region MacHandler
      <#
            Make sure we have the right format
      #>
      $regex = '((\d|([a-f]|[A-F])){2}){6}'
      [string]$Mac = $Mac.Trim().Replace(':', '').Replace('.', '').Replace('-', '')
      if (($Mac.Length -eq 12) -and ($Mac -match $regex))
      {
         [string]$Mac = ($Mac -replace '..(?!$)', '$&:')
      }
      else
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber

         Write-Verbose -Message ('Error was in Line {0}' -f $line)

         # Error Message
         Write-Error -Message ('Sorry, but {0} is a format that the UniFi Controller will nor understand' -f $Mac) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion MacHandler

      #region ApiRequestBodyInput
      $Script:ApiRequestBodyInput = [PSCustomObject][ordered]@{
         cmd = 'block-sta'
         mac = $Mac
      }
      #endregion ApiRequestBodyInput
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'

         $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/cmd/stamgr'

         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region ApiRequestBody
         $paramConvertToJson = @{
            InputObject   = $ApiRequestBodyInput
            Depth         = 5
            ErrorAction   = 'Stop'
            WarningAction = 'SilentlyContinue'
         }

         $ApiRequestBodyInput = $null

         $Script:ApiRequestBody = (ConvertTo-Json @paramConvertToJson)
         #endregion ApiRequestBody

         #region Request
         Write-Verbose -Message 'Send the Request'

         $paramInvokeRestMethod = @{
            Method        = 'Post'
            Uri           = $ApiRequestUri
            Headers       = $RestHeader
            Body          = $ApiRequestBody
            ErrorAction   = 'SilentlyContinue'
            WarningAction = 'SilentlyContinue'
            WebSession    = $RestSession
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)

         Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"

         Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         #endregion Request
      }
      catch
      {
         # Try to Logout
         try
         {
            $null = (Invoke-UniFiApiLogout -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            # We don't care about that
            Write-Verbose -Message 'Logout failed'
         }

         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust

         #region RestoreProgressPreference
         $ProgressPreference = $ExistingProgressPreference
         #endregion RestoreProgressPreference
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber

         Write-Verbose -Message ('Error was in Line {0}' -f $line)

         if ($Session.data)
         {
            Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         }

         # Error Message
         Write-Error -Message 'Unable to get the network list' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end
   {
      # Dump the Result
      Write-Output -InputObject $true

      # Cleanup
      $Session = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Start Invoke-UnifiBlockClient'
   }
}

function Invoke-UnifiForgetClient
{
   <#
         .SYNOPSIS
         Forget one or more client devices via the API of the UniFi Controller
 
         .DESCRIPTION
         Forget one or more client devices via the API of the Ubiquiti UniFi Controller
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .PARAMETER Mac
         Client MAC address
 
         .EXAMPLE
         PS C:\> Invoke-UnifiForgetClient -Mac '84:3a:4b:cd:88:2D'
 
         Forget one or more client devices via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Invoke-UnifiForgetClient -Mac '84:3a:4b:cd:88:2D' -UnifiSite 'Contoso'
 
         Forget one or more client devices on Site 'Contoso' via the API of the UniFi Controller
 
         .NOTES
         Initial version of the Ubiquiti UniFi Controller automation function
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([bool])]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default',
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 1,
      HelpMessage = 'Client MAC address')]
      [ValidateNotNullOrEmpty()]
      [Alias('UniFiMac', 'MacAddress')]
      [string[]]
      $Mac
   )

   begin
   {
      Write-Verbose -Message 'Start Invoke-UnifiForgetClient'

      # Cleanup
      $Session = $null

      #region MacHandler
      $Mac = $Mac.ToLower()
      #endregion MacHandler

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      #region CheckSession
      if (-not (Get-UniFiIsAlive))
      {
         #region LoginCheckLoop
         # TODO: Move to config
         [int]$NumberOfRetries = '3'
         [int]$RetryTimer = '5'
         # Setup the Loop itself
         $RetryLoop = $false
         [int]$RetryCounter = '0'
         # Original code/idea was by Thomas Maurer
         do
         {
            try
            {
               # Try to Logout
               try
               {
                  if (-not (Get-UniFiIsAlive))
                  {
                     throw
                  }
               }
               catch
               {
                  # We don't care about that
                  Write-Verbose -Message 'Logout failed'
               }

               # Try a Session check (login is inherited here within the helper function)
               if (-not (Get-UniFiIsAlive -ErrorAction Stop -WarningAction SilentlyContinue))
               {
                  Write-Error -Message 'Login failed' -ErrorAction Stop -Category AuthenticationError
               }

               # End the Loop
               $RetryLoop = $true
            }
            catch
            {
               if ($RetryCounter -gt $NumberOfRetries)
               {
                  Write-Warning -Message ('Could still not login, after {0} retries.' -f $NumberOfRetries)

                  # Stay in the Loop
                  $RetryLoop = $true
               }
               else
               {
                  if ($RetryCounter -eq 0)
                  {
                     Write-Warning -Message ('Could not login! Retrying in {0} seconds.' -f $RetryTimer)
                  }
                  else
                  {
                     Write-Warning -Message ('Retry {0} of {1} failed. Retrying in {2} seconds.' -f $RetryCounter, $NumberOfRetries, $RetryTimer)
                  }

                  $null = (Start-Sleep -Seconds $RetryTimer)

                  $RetryCounter = $RetryCounter + 1
               }
            }
         }
         while ($RetryLoop -eq $false)
         #endregion LoginCheckLoop
      }
      #endregion CheckSession

      #region ReCheckSession
      if (-not ($RestSession))
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         Write-Error -Message 'Unable to login! Check the connection to the controller, SSL certificates, and your credentials!' -ErrorAction Stop -Category AuthenticationError

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion ReCheckSession

      #region MacHandler
      <#
            Make sure we have the right format
      #>
      $regex = '((\d|([a-f]|[A-F])){2}){6}'
      [string]$Mac = $Mac.Trim().Replace(':', '').Replace('.', '').Replace('-', '')
      if (($Mac.Length -eq 12) -and ($Mac -match $regex))
      {
         [string]$Mac = ($Mac -replace '..(?!$)', '$&:')
      }
      else
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber

         Write-Verbose -Message ('Error was in Line {0}' -f $line)

         # Error Message
         Write-Error -Message ('Sorry, but {0} is a format that the UniFi Controller will nor understand' -f $Mac) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion MacHandler

      #region ApiRequestBodyInput
      $Script:ApiRequestBodyInput = [PSCustomObject][ordered]@{
         cmd  = 'forget-sta'
         macs = @($Mac)
      }
      #endregion ApiRequestBodyInput
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'

         $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/cmd/stamgr'

         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region ApiRequestBody
         $paramConvertToJson = @{
            InputObject   = $ApiRequestBodyInput
            Depth         = 5
            ErrorAction   = 'Stop'
            WarningAction = 'SilentlyContinue'
         }

         $ApiRequestBodyInput = $null

         $Script:ApiRequestBody = (ConvertTo-Json @paramConvertToJson)
         #endregion ApiRequestBody

         #region Request
         Write-Verbose -Message 'Send the Request'

         $paramInvokeRestMethod = @{
            Method        = 'Post'
            Uri           = $ApiRequestUri
            Headers       = $RestHeader
            Body          = $ApiRequestBody
            ErrorAction   = 'SilentlyContinue'
            WarningAction = 'SilentlyContinue'
            WebSession    = $RestSession
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)

         Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"

         Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         #endregion Request
      }
      catch
      {
         # Try to Logout
         try
         {
            $null = (Invoke-UniFiApiLogout -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            # We don't care about that
            Write-Verbose -Message 'Logout failed'
         }

         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust

         #region RestoreProgressPreference
         $ProgressPreference = $ExistingProgressPreference
         #endregion RestoreProgressPreference
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber

         Write-Verbose -Message ('Error was in Line {0}' -f $line)

         if ($Session.data)
         {
            Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         }

         # Error Message
         Write-Error -Message 'Unable to get the network list' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end
   {
      # Dump the Result
      Write-Output -InputObject $true

      # Cleanup
      $Session = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Start Invoke-UnifiForgetClient'
   }
}

function Invoke-UnifiReconnectClient
{
   <#
         .SYNOPSIS
         Reconnect a client device via the API of the UniFi Controller
 
         .DESCRIPTION
         Reconnect a client device via the API of the Ubiquiti UniFi Controller
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .PARAMETER Mac
         Client MAC address
 
         .EXAMPLE
         PS C:\> Invoke-UnifiReconnectClient -Mac '84:3a:4b:cd:88:2D'
 
         Reconnect a client device via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Invoke-UnifiReconnectClient -Mac '84:3a:4b:cd:88:2D' -UnifiSite 'Contoso'
 
         Reconnect a client device on Site 'Contoso' via the API of the UniFi Controller
 
         .NOTES
         Initial version of the Ubiquiti UniFi Controller automation function
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([bool])]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default',
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 1,
      HelpMessage = 'Client MAC address')]
      [ValidateNotNullOrEmpty()]
      [Alias('UniFiMac', 'MacAddress')]
      [string]
      $Mac
   )

   begin
   {
      Write-Verbose -Message 'Start Invoke-UnifiReconnectClient'

      # Cleanup
      $Session = $null

      #region MacHandler
      $Mac = $Mac.ToLower()
      #endregion MacHandler

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      #region CheckSession
      if (-not (Get-UniFiIsAlive))
      {
         #region LoginCheckLoop
         # TODO: Move to config
         [int]$NumberOfRetries = '3'
         [int]$RetryTimer = '5'
         # Setup the Loop itself
         $RetryLoop = $false
         [int]$RetryCounter = '0'
         # Original code/idea was by Thomas Maurer
         do
         {
            try
            {
               # Try to Logout
               try
               {
                  if (-not (Get-UniFiIsAlive))
                  {
                     throw
                  }
               }
               catch
               {
                  # We don't care about that
                  Write-Verbose -Message 'Logout failed'
               }

               # Try a Session check (login is inherited here within the helper function)
               if (-not (Get-UniFiIsAlive -ErrorAction Stop -WarningAction SilentlyContinue))
               {
                  Write-Error -Message 'Login failed' -ErrorAction Stop -Category AuthenticationError
               }

               # End the Loop
               $RetryLoop = $true
            }
            catch
            {
               if ($RetryCounter -gt $NumberOfRetries)
               {
                  Write-Warning -Message ('Could still not login, after {0} retries.' -f $NumberOfRetries)

                  # Stay in the Loop
                  $RetryLoop = $true
               }
               else
               {
                  if ($RetryCounter -eq 0)
                  {
                     Write-Warning -Message ('Could not login! Retrying in {0} seconds.' -f $RetryTimer)
                  }
                  else
                  {
                     Write-Warning -Message ('Retry {0} of {1} failed. Retrying in {2} seconds.' -f $RetryCounter, $NumberOfRetries, $RetryTimer)
                  }

                  $null = (Start-Sleep -Seconds $RetryTimer)

                  $RetryCounter = $RetryCounter + 1
               }
            }
         }
         while ($RetryLoop -eq $false)
         #endregion LoginCheckLoop
      }
      #endregion CheckSession

      #region ReCheckSession
      if (-not ($RestSession))
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         Write-Error -Message 'Unable to login! Check the connection to the controller, SSL certificates, and your credentials!' -ErrorAction Stop -Category AuthenticationError

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion ReCheckSession

      #region MacHandler
      <#
            Make sure we have the right format
      #>
      $regex = '((\d|([a-f]|[A-F])){2}){6}'
      [string]$Mac = $Mac.Trim().Replace(':', '').Replace('.', '').Replace('-', '')
      if (($Mac.Length -eq 12) -and ($Mac -match $regex))
      {
         [string]$Mac = ($Mac -replace '..(?!$)', '$&:')
      }
      else
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber

         Write-Verbose -Message ('Error was in Line {0}' -f $line)

         # Error Message
         Write-Error -Message ('Sorry, but {0} is a format that the UniFi Controller will nor understand' -f $Mac) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion MacHandler

      #region ApiRequestBodyInput
      $Script:ApiRequestBodyInput = [PSCustomObject][ordered]@{
         cmd = 'kick-sta'
         mac = $Mac
      }
      #endregion ApiRequestBodyInput
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'

         $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/cmd/stamgr'

         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region ApiRequestBody
         $paramConvertToJson = @{
            InputObject   = $ApiRequestBodyInput
            Depth         = 5
            ErrorAction   = 'Stop'
            WarningAction = 'SilentlyContinue'
         }

         $ApiRequestBodyInput = $null

         $Script:ApiRequestBody = (ConvertTo-Json @paramConvertToJson)
         #endregion ApiRequestBody

         #region Request
         Write-Verbose -Message 'Send the Request'

         $paramInvokeRestMethod = @{
            Method        = 'Post'
            Uri           = $ApiRequestUri
            Headers       = $RestHeader
            Body          = $ApiRequestBody
            ErrorAction   = 'SilentlyContinue'
            WarningAction = 'SilentlyContinue'
            WebSession    = $RestSession
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)

         Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"

         Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         #endregion Request
      }
      catch
      {
         # Try to Logout
         try
         {
            $null = (Invoke-UniFiApiLogout -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            # We don't care about that
            Write-Verbose -Message 'Logout failed'
         }

         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust

         #region RestoreProgressPreference
         $ProgressPreference = $ExistingProgressPreference
         #endregion RestoreProgressPreference
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber

         Write-Verbose -Message ('Error was in Line {0}' -f $line)

         if ($Session.data)
         {
            Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         }

         # Error Message
         Write-Error -Message 'Unable to get the network list' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end
   {
      # Dump the Result
      Write-Output -InputObject $true

      # Cleanup
      $Session = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Start Invoke-UnifiReconnectClient'
   }
}

function Invoke-UnifiUnauthorizeGuest
{
   <#
         .SYNOPSIS
         Unauthorize a client device via the API of the UniFi Controller
 
         .DESCRIPTION
         Unauthorize a client device via the API of the Ubiquiti UniFi Controller
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .PARAMETER Mac
         Client MAC address
 
         .EXAMPLE
         PS C:\> Invoke-UnifiUnauthorizeGuest -Mac '84:3a:4b:cd:88:2D'
 
         Unauthorize a client device via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Invoke-UnifiUnauthorizeGuest -Mac '84:3a:4b:cd:88:2D' -UnifiSite 'Contoso'
 
         Unauthorize a client device on Site 'Contoso' via the API of the UniFi Controller
 
         .NOTES
         Initial version of the Ubiquiti UniFi Controller automation function
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([bool])]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default',
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 1,
      HelpMessage = 'Client MAC address')]
      [ValidateNotNullOrEmpty()]
      [Alias('UniFiMac', 'MacAddress')]
      [string]
      $Mac
   )

   begin
   {
      Write-Verbose -Message 'Start Invoke-UnifiUnauthorizeGuest'

      # Cleanup
      $Session = $null

      #region MacHandler
      $Mac = $Mac.ToLower()
      #endregion MacHandler

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      #region CheckSession
      if (-not (Get-UniFiIsAlive))
      {
         #region LoginCheckLoop
         # TODO: Move to config
         [int]$NumberOfRetries = '3'
         [int]$RetryTimer = '5'
         # Setup the Loop itself
         $RetryLoop = $false
         [int]$RetryCounter = '0'
         # Original code/idea was by Thomas Maurer
         do
         {
            try
            {
               # Try to Logout
               try
               {
                  if (-not (Get-UniFiIsAlive))
                  {
                     throw
                  }
               }
               catch
               {
                  # We don't care about that
                  Write-Verbose -Message 'Logout failed'
               }

               # Try a Session check (login is inherited here within the helper function)
               if (-not (Get-UniFiIsAlive -ErrorAction Stop -WarningAction SilentlyContinue))
               {
                  Write-Error -Message 'Login failed' -ErrorAction Stop -Category AuthenticationError
               }

               # End the Loop
               $RetryLoop = $true
            }
            catch
            {
               if ($RetryCounter -gt $NumberOfRetries)
               {
                  Write-Warning -Message ('Could still not login, after {0} retries.' -f $NumberOfRetries)

                  # Stay in the Loop
                  $RetryLoop = $true
               }
               else
               {
                  if ($RetryCounter -eq 0)
                  {
                     Write-Warning -Message ('Could not login! Retrying in {0} seconds.' -f $RetryTimer)
                  }
                  else
                  {
                     Write-Warning -Message ('Retry {0} of {1} failed. Retrying in {2} seconds.' -f $RetryCounter, $NumberOfRetries, $RetryTimer)
                  }

                  $null = (Start-Sleep -Seconds $RetryTimer)

                  $RetryCounter = $RetryCounter + 1
               }
            }
         }
         while ($RetryLoop -eq $false)
         #endregion LoginCheckLoop
      }
      #endregion CheckSession

      #region ReCheckSession
      if (-not ($RestSession))
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         Write-Error -Message 'Unable to login! Check the connection to the controller, SSL certificates, and your credentials!' -ErrorAction Stop -Category AuthenticationError

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion ReCheckSession

      #region MacHandler
      <#
            Make sure we have the right format
      #>
      $regex = '((\d|([a-f]|[A-F])){2}){6}'
      [string]$Mac = $Mac.Trim().Replace(':', '').Replace('.', '').Replace('-', '')
      if (($Mac.Length -eq 12) -and ($Mac -match $regex))
      {
         [string]$Mac = ($Mac -replace '..(?!$)', '$&:')
      }
      else
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber

         Write-Verbose -Message ('Error was in Line {0}' -f $line)

         # Error Message
         Write-Error -Message ('Sorry, but {0} is a format that the UniFi Controller will nor understand' -f $Mac) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion MacHandler

      #region ApiRequestBodyInput
      $Script:ApiRequestBodyInput = [PSCustomObject][ordered]@{
         cmd = 'unauthorize-guest'
         mac = $Mac
      }
      #endregion ApiRequestBodyInput
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'

         $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/cmd/stamgr'

         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region ApiRequestBody
         $paramConvertToJson = @{
            InputObject   = $ApiRequestBodyInput
            Depth         = 5
            ErrorAction   = 'Stop'
            WarningAction = 'SilentlyContinue'
         }

         $ApiRequestBodyInput = $null

         $Script:ApiRequestBody = (ConvertTo-Json @paramConvertToJson)
         #endregion ApiRequestBody

         #region Request
         Write-Verbose -Message 'Send the Request'

         $paramInvokeRestMethod = @{
            Method        = 'Post'
            Uri           = $ApiRequestUri
            Headers       = $RestHeader
            Body          = $ApiRequestBody
            ErrorAction   = 'SilentlyContinue'
            WarningAction = 'SilentlyContinue'
            WebSession    = $RestSession
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)

         Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"

         Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         #endregion Request
      }
      catch
      {
         # Try to Logout
         try
         {
            $null = (Invoke-UniFiApiLogout -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            # We don't care about that
            Write-Verbose -Message 'Logout failed'
         }

         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust

         #region RestoreProgressPreference
         $ProgressPreference = $ExistingProgressPreference
         #endregion RestoreProgressPreference
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber

         Write-Verbose -Message ('Error was in Line {0}' -f $line)

         if ($Session.data)
         {
            Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
            $Result = $true
         }
         else
         {
            $Result = $false
         }

         # Error Message
         Write-Error -Message 'Unable to get the network list' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end
   {
      # Dump the Result
      Write-Output -InputObject $Result

      # Cleanup
      $Session = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Start Invoke-UnifiUnauthorizeGuest'
   }
}

function Invoke-UnifiUnblockClient
{
   <#
         .SYNOPSIS
         Unblock a client device via the API of the UniFi Controller
 
         .DESCRIPTION
         Unblock a client device via the API of the Ubiquiti UniFi Controller
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .PARAMETER Mac
         Client MAC address
 
         .EXAMPLE
         PS C:\> Invoke-UnifiUnblockClient -Mac '84:3a:4b:cd:88:2D'
 
         Unblock a client device via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Invoke-UnifiUnblockClient -Mac '84:3a:4b:cd:88:2D' -UnifiSite 'Contoso'
 
         Unblock a client device on Site 'Contoso' via the API of the UniFi Controller
 
         .NOTES
         Initial version of the Ubiquiti UniFi Controller automation function
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([bool])]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default',
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 1,
      HelpMessage = 'Client MAC address')]
      [ValidateNotNullOrEmpty()]
      [Alias('UniFiMac', 'MacAddress')]
      [string]
      $Mac
   )

   begin
   {
      Write-Verbose -Message 'Start Invoke-UnifiUnblockClient'

      # Cleanup
      $Session = $null

      #region MacHandler
      $Mac = $Mac.ToLower()
      #endregion MacHandler

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      #region CheckSession
      if (-not (Get-UniFiIsAlive))
      {
         #region LoginCheckLoop
         # TODO: Move to config
         [int]$NumberOfRetries = '3'
         [int]$RetryTimer = '5'
         # Setup the Loop itself
         $RetryLoop = $false
         [int]$RetryCounter = '0'
         # Original code/idea was by Thomas Maurer
         do
         {
            try
            {
               # Try to Logout
               try
               {
                  if (-not (Get-UniFiIsAlive))
                  {
                     throw
                  }
               }
               catch
               {
                  # We don't care about that
                  Write-Verbose -Message 'Logout failed'
               }

               # Try a Session check (login is inherited here within the helper function)
               if (-not (Get-UniFiIsAlive -ErrorAction Stop -WarningAction SilentlyContinue))
               {
                  Write-Error -Message 'Login failed' -ErrorAction Stop -Category AuthenticationError
               }

               # End the Loop
               $RetryLoop = $true
            }
            catch
            {
               if ($RetryCounter -gt $NumberOfRetries)
               {
                  Write-Warning -Message ('Could still not login, after {0} retries.' -f $NumberOfRetries)

                  # Stay in the Loop
                  $RetryLoop = $true
               }
               else
               {
                  if ($RetryCounter -eq 0)
                  {
                     Write-Warning -Message ('Could not login! Retrying in {0} seconds.' -f $RetryTimer)
                  }
                  else
                  {
                     Write-Warning -Message ('Retry {0} of {1} failed. Retrying in {2} seconds.' -f $RetryCounter, $NumberOfRetries, $RetryTimer)
                  }

                  $null = (Start-Sleep -Seconds $RetryTimer)

                  $RetryCounter = $RetryCounter + 1
               }
            }
         }
         while ($RetryLoop -eq $false)
         #endregion LoginCheckLoop
      }
      #endregion CheckSession

      #region ReCheckSession
      if (-not ($RestSession))
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         Write-Error -Message 'Unable to login! Check the connection to the controller, SSL certificates, and your credentials!' -ErrorAction Stop -Category AuthenticationError

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion ReCheckSession

      #region MacHandler
      <#
            Make sure we have the right format
      #>
      $regex = '((\d|([a-f]|[A-F])){2}){6}'
      [string]$Mac = $Mac.Trim().Replace(':', '').Replace('.', '').Replace('-', '')
      if (($Mac.Length -eq 12) -and ($Mac -match $regex))
      {
         [string]$Mac = ($Mac -replace '..(?!$)', '$&:')
      }
      else
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber

         Write-Verbose -Message ('Error was in Line {0}' -f $line)

         # Error Message
         Write-Error -Message ('Sorry, but {0} is a format that the UniFi Controller will nor understand' -f $Mac) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion MacHandler

      #region ApiRequestBodyInput
      $Script:ApiRequestBodyInput = [PSCustomObject][ordered]@{
         cmd = 'unblock-sta'
         mac = $Mac
      }
      #endregion ApiRequestBodyInput
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'

         $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/cmd/stamgr'

         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region ApiRequestBody
         $paramConvertToJson = @{
            InputObject   = $ApiRequestBodyInput
            Depth         = 5
            ErrorAction   = 'Stop'
            WarningAction = 'SilentlyContinue'
         }

         $ApiRequestBodyInput = $null

         $Script:ApiRequestBody = (ConvertTo-Json @paramConvertToJson)
         #endregion ApiRequestBody

         #region Request
         Write-Verbose -Message 'Send the Request'

         $paramInvokeRestMethod = @{
            Method        = 'Post'
            Uri           = $ApiRequestUri
            Headers       = $RestHeader
            Body          = $ApiRequestBody
            ErrorAction   = 'SilentlyContinue'
            WarningAction = 'SilentlyContinue'
            WebSession    = $RestSession
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)

         Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"

         Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         #endregion Request
      }
      catch
      {
         # Try to Logout
         try
         {
            $null = (Invoke-UniFiApiLogout -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            # We don't care about that
            Write-Verbose -Message 'Logout failed'
         }

         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust

         #region RestoreProgressPreference
         $ProgressPreference = $ExistingProgressPreference
         #endregion RestoreProgressPreference
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber

         Write-Verbose -Message ('Error was in Line {0}' -f $line)

         if ($Session.data)
         {
            Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         }

         # Error Message
         Write-Error -Message 'Unable to get the network list' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end
   {
      # Dump the Result
      Write-Output -InputObject $true

      # Cleanup
      $Session = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Start Invoke-UnifiUnblockClient'
   }
}

function New-UniFiConfig
{
   <#
         .SYNOPSIS
         Creates the UniFi config JSON file
 
         .DESCRIPTION
         Creates the UniFi config JSON file. If no input is given it creates one with all the defaults.
 
         .PARAMETER UniFiUsername
         The login of a UniFi User with admin rights
 
         .PARAMETER UniFiPassword
         The password for the user given above. It is clear text for now. I know... But the Ubiquiti UniFi Controller seems to understand plain text only.
 
         .PARAMETER UniFiProtocol
         Valid is http and https. default is https
         Please note: http is untested and it might not even work!
 
         .PARAMETER UniFiSelfSignedCert
         If you use a self signed certificate and/or a certificate from an untrusted CA, you might want to use true here.
         Default is FALSE
 
         .PARAMETER UniFiHostname
         The Ubiquiti UniFi Controller you want to use. You can use a Fully-Qualified Host Name (FQHN) or an IP address.
 
         .PARAMETER UniFiPort
         The port number that you have configured on your Ubiquiti UniFi Controller.
         The default is 8443
 
         .PARAMETER Path
         Where to safe the JSON config. Default is the directory where you call the function.
         e.g. .\UniFiConfig.json
 
         .PARAMETER force
         Replaces the contents of a file, even if the file is read-only. Without this parameter, read-only files are not changed.
 
         .EXAMPLE
         PS C:\> New-UniFiConfig
 
         .EXAMPLE
         PS C:\> New-UniFiConfig -UniFiUsername 'unfi.admin.user' -UniFiPassword 'mySuperSecretPassworHere' -UniFiProtocol 'https' -UniFiSelfSignedCert $true -UniFiHostname 'unifi.contoso.com' -UniFiPort '8443' -Path '.\UniFiConfig.json'
 
         .EXAMPLE
         PS C:\> New-UniFiConfig -UniFiUsername 'unfi.admin.user' -UniFiPassword 'mySuperSecretPassworHere' -UniFiProtocol 'https' -UniFiSelfSignedCert $true -UniFiHostname 'unifi.contoso.com' -UniFiPort '8443' -Path '.\UniFiConfig.json' -force
 
         .NOTES
         Just an helper function to create a JSON config
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Get-UniFiCredentials
   #>

   [CmdletBinding(ConfirmImpact = 'None',
   SupportsShouldProcess)]
   param
   (
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 0)]
      [ValidateNotNullOrEmpty()]
      [Alias('enUniFiUsername')]
      [string]
      $UniFiUsername = 'unfi.admin.user',
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 1)]
      [ValidateNotNullOrEmpty()]
      [Alias('enUniFiPassword')]
      [string]
      $UniFiPassword = 'mySuperSecretPassworHere',
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 2)]
      [ValidateSet('http', 'https', IgnoreCase = $true)]
      [ValidateNotNullOrEmpty()]
      [Alias('enUniFiProtocol')]
      [string]
      $UniFiProtocol = 'https',
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 3)]
      [ValidateNotNullOrEmpty()]
      [Alias('enUniFiSelfSignedCert')]
      [bool]
      $UniFiSelfSignedCert = $false,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 4)]
      [ValidateNotNullOrEmpty()]
      [Alias('enUniFiHostname')]
      [string]
      $UniFiHostname = 'unifi.contoso.com',
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 5)]
      [ValidateNotNullOrEmpty()]
      [Alias('enUniFiPort')]
      [int]
      $UniFiPort = 8443,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 6)]
      [ValidateNotNullOrEmpty()]
      [Alias('enConfigPath', 'ConfigPath')]
      [string]
      $Path = '.\UniFiConfig.json',
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 7)]
      [switch]
      $force = $false
   )

   begin
   {
      Write-Verbose -Message 'Start New-UniFiConfig'

      #region JsonInputData
      $JsonInputData = [PSCustomObject][ordered]@{
         Login          = [PSCustomObject][ordered]@{
            Username = $UniFiUsername
            Password = $UniFiPassword
         }
         protocol       = $UniFiProtocol
         SelfSignedCert = $UniFiSelfSignedCert
         Hostname       = $UniFiHostname
         Port           = $UniFiPort
      }
      #endregion JsonInputData
   }

   process
   {
      try
      {
         #region JsonData
         $paramConvertToJson = @{
            InputObject   = $JsonInputData
            Depth         = 2
            ErrorAction   = 'Stop'
            WarningAction = 'SilentlyContinue'
         }
         $JsonData = (ConvertTo-Json @paramConvertToJson)

         $paramSetContent = @{
            Value         = $JsonData
            Path          = $Path
            PassThru      = $true
            Force         = $force
            Confirm       = $false
            ErrorAction   = 'Stop'
            WarningAction = 'SilentlyContinue'
         }
         if ($pscmdlet.ShouldProcess($Path, 'Create'))
         {
            $null = (Set-Content @paramSetContent)
         }
      }
      catch
      {
         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
   }

   end
   {
      # Cleanup
      $JsonInputData = $null
      $paramConvertToJson = $null

      Write-Verbose -Message 'Done New-UniFiConfig'
   }
}

function Set-UnifiFirewallGroup
{
   <#
         .SYNOPSIS
         Get a given Firewall Group via the API of the UniFi Controller
 
         .DESCRIPTION
         Get a given Firewall Group via the API of the Ubiquiti UniFi Controller
 
         .PARAMETER UnfiFirewallGroup
         Unfi Firewall Group
 
         .PARAMETER UnifiCidrInput
         IPv4 or IPv6 input List (PSObject)
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .EXAMPLE
         PS C:\> Set-UnifiFirewallGroup -UnfiFirewallGroup 'Value1' -UnifiCidrInput $value2
 
         Get a given Firewall Group via the API of the Ubiquiti UniFi Controller
 
         .NOTES
         Initial version of the Ubiquiti UniFi Controller automation function
 
         .LINK
         Get-UnifiFirewallGroups
 
         .LINK
         Get-UnifiFirewallGroupBody
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
   #>
   [CmdletBinding(ConfirmImpact = 'None')]
   param
   (
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 0,
      HelpMessage = 'Unfi Firewall Group')]
      [ValidateNotNullOrEmpty()]
      [Alias('FirewallGroup')]
      [string]
      $UnfiFirewallGroup,
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 1,
      HelpMessage = 'IPv4 or IPv6 input List')]
      [ValidateNotNullOrEmpty()]
      [Alias('CidrInput')]
      [psobject]
      $UnifiCidrInput,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 2)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default'
   )

   begin
   {
      Write-Verbose -Message 'Start Set-UnifiFirewallGroup'

      # Cleanup
      $TargetFirewallGroup = $null
      $Session = $null

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      #region CheckSession
      if (-not (Get-UniFiIsAlive))
      {
         #region LoginCheckLoop
         # TODO: Move to config
         [int]$NumberOfRetries = '3'
         [int]$RetryTimer = '5'
         # Setup the Loop itself
         $RetryLoop = $false
         [int]$RetryCounter = '0'
         # Original code/idea was by Thomas Maurer
         do
         {
            try
            {
               # Try to Logout
               try
               {
                  if (-not (Get-UniFiIsAlive)) { Throw }
               }
               catch
               {
                  # We don't care about that
                  Write-Verbose -Message 'Logout failed'
               }

               # Try a Session check (login is inherited here within the helper function)
               if (-not (Get-UniFiIsAlive -ErrorAction Stop -WarningAction SilentlyContinue))
               {
                  Write-Error -Message 'Login failed' -ErrorAction Stop -Category AuthenticationError
               }

               # End the Loop
               $RetryLoop = $true
            }
            catch
            {
               if ($RetryCounter -gt $NumberOfRetries)
               {
                  Write-Warning -Message ('Could still not login, after {0} retries.' -f $NumberOfRetries)

                  # Stay in the Loop
                  $RetryLoop = $true
               }
               else
               {
                  if ($RetryCounter -eq 0)
                  {
                     Write-Warning -Message ('Could not login! Retrying in {0} seconds.' -f $RetryTimer)
                  }
                  else
                  {
                     Write-Warning -Message ('Retry {0} of {1} failed. Retrying in {2} seconds.' -f $RetryCounter, $NumberOfRetries, $RetryTimer)
                  }

                  $null = (Start-Sleep -Seconds $RetryTimer)

                  $RetryCounter = $RetryCounter + 1
               }
            }
         }
         While ($RetryLoop -eq $false)
         #endregion LoginCheckLoop
      }
      #endregion CheckSession

      #region ReCheckSession
      if (-not ($RestSession))
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         Write-Error -Message 'Unable to login! Check the connection to the controller, SSL certificates, and your credentials!' -ErrorAction Stop -Category AuthenticationError

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion ReCheckSession

      Write-Verbose -Message ('Check if {0} exists' -f $UnfiFirewallGroup)

      $TargetFirewallGroup = (Get-UnifiFirewallGroups | Where-Object -FilterScript {
            ($_.Name -eq $UnfiFirewallGroup)
      })

      if (-not $TargetFirewallGroup)
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber
         Write-Verbose -Message ('Error was in Line {0}' -f $line)

         Write-Error -Message ('Unable to find the Firewall Group {0}' -f $UnfiFirewallGroup) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }

      Write-Verbose -Message ('{0} exists' -f $UnfiFirewallGroup)

      $UnfiFirewallGroupBody = (Get-UnifiFirewallGroupBody -UnfiFirewallGroup $TargetFirewallGroup -UnifiCidrInput $UnifiCidrInput)
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'

         $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/rest/firewallgroup/' + $TargetFirewallGroup._id

         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region Request
         Write-Verbose -Message 'Send the Request'

         $paramInvokeRestMethod = @{
            Method        = 'Put'
            Uri           = $ApiRequestUri
            Headers       = $RestHeader
            Body          = $UnfiFirewallGroupBody
            ErrorAction   = 'SilentlyContinue'
            WarningAction = 'SilentlyContinue'
            WebSession    = $RestSession
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)

         Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"
         Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         #endregion Request
      }
      catch
      {
         # Try to Logout
         try
         {
            $null = (Invoke-UniFiApiLogout -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            # We don't care about that
            Write-Verbose -Message 'Logout failed'
         }

         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber
         Write-Verbose -Message ('Error was in Line {0}' -f $line)
         Write-Verbose -Message ('Error was {0}' -f $Session.meta.rc)

         # Error Message
         Write-Error -Message 'Unable to Login' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end
   {
      # Cleanup
      $Session = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Done Set-UnifiFirewallGroup'
   }
}

function Set-UnifiNetworkDetails
{
   <#
         .SYNOPSIS
         Modifies one network via the API of the UniFi Controller
 
         .DESCRIPTION
         Modifies one network via the API of the UniFi Controller
 
         .PARAMETER UnifiNetwork
         The ID (network_id) of the network you would like to get detailed information about.
 
         .PARAMETER UniFiBody
         JSON formed Body for the Request
 
         .PARAMETER UnifiSite
         UniFi Site as configured. The default is: default
 
         .EXAMPLE
         PS C:\> Set-UnifiNetworkDetails -UnifiNetwork $value1
 
         Get the details about one network via the API of the UniFi Controller
 
         .EXAMPLE
         PS C:\> Set-UnifiNetworkDetails -UnifiNetwork $value1 -UnifiSite 'Contoso'
 
         Get the details about one network on Site 'Contoso' via the API of the UniFi Controller
 
         .NOTES
         Initial version of the Ubiquiti UniFi Controller automation function
 
         .LINK
         Get-UniFiConfig
 
         .LINK
         Set-UniFiDefaultRequestHeader
 
         .LINK
         Invoke-UniFiApiLogin
 
         .LINK
         Invoke-RestMethod
   #>

   [CmdletBinding(ConfirmImpact = 'None')]
   [OutputType([psobject])]
   param
   (
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 0,
      HelpMessage = 'The ID (network_id) of the network you would like to get detaild information about.')]
      [ValidateNotNullOrEmpty()]
      [Alias('UnifiNetworkId', 'NetworkId')]
      [string]
      $UnifiNetwork,
      [Parameter(Mandatory,
            ValueFromPipeline,
            ValueFromPipelineByPropertyName,
            Position = 1,
      HelpMessage = 'JSON formed Body for the Request')]
      [ValidateNotNullOrEmpty()]
      [Alias('Body')]
      [string]
      $UniFiBody,
      [Parameter(ValueFromPipeline,
            ValueFromPipelineByPropertyName,
      Position = 2)]
      [ValidateNotNullOrEmpty()]
      [Alias('Site')]
      [string]
      $UnifiSite = 'default'
   )

   begin
   {
      Write-Verbose -Message 'Start Set-UnifiNetworkDetails'

      # Cleanup
      $Session = $null

      #region SafeProgressPreference
      # Safe ProgressPreference and Setup SilentlyContinue for the function
      $ExistingProgressPreference = ($ProgressPreference)
      $ProgressPreference = 'SilentlyContinue'
      #endregion SafeProgressPreference

      #region CheckSession
      if (-not (Get-UniFiIsAlive))
      {
         #region LoginCheckLoop
         # TODO: Move to config
         [int]$NumberOfRetries = '3'
         [int]$RetryTimer = '5'
         # Setup the Loop itself
         $RetryLoop = $false
         [int]$RetryCounter = '0'
         # Original code/idea was by Thomas Maurer
         do
         {
            try
            {
               # Try to Logout
               try
               {
                  if (-not (Get-UniFiIsAlive)) { Throw }
               }
               catch
               {
                  # We don't care about that
                  Write-Verbose -Message 'Logout failed'
               }

               # Try a Session check (login is inherited here within the helper function)
               if (-not (Get-UniFiIsAlive -ErrorAction Stop -WarningAction SilentlyContinue))
               {
                  Write-Error -Message 'Login failed' -ErrorAction Stop -Category AuthenticationError
               }

               # End the Loop
               $RetryLoop = $true
            }
            catch
            {
               if ($RetryCounter -gt $NumberOfRetries)
               {
                  Write-Warning -Message ('Could still not login, after {0} retries.' -f $NumberOfRetries)

                  # Stay in the Loop
                  $RetryLoop = $true
               }
               else
               {
                  if ($RetryCounter -eq 0)
                  {
                     Write-Warning -Message ('Could not login! Retrying in {0} seconds.' -f $RetryTimer)
                  }
                  else
                  {
                     Write-Warning -Message ('Retry {0} of {1} failed. Retrying in {2} seconds.' -f $RetryCounter, $NumberOfRetries, $RetryTimer)
                  }

                  $null = (Start-Sleep -Seconds $RetryTimer)

                  $RetryCounter = $RetryCounter + 1
               }
            }
         }
         While ($RetryLoop -eq $false)
         #endregion LoginCheckLoop
      }
      #endregion CheckSession

      #region ReCheckSession
      if (-not ($RestSession))
      {
         # Restore ProgressPreference
         $ProgressPreference = $ExistingProgressPreference

         Write-Error -Message 'Unable to login! Check the connection to the controller, SSL certificates, and your credentials!' -ErrorAction Stop -Category AuthenticationError

         # Only here to catch a global ErrorAction overwrite
         break
      }
      #endregion ReCheckSession
   }

   process
   {
      try
      {
         #region ReadConfig
         Write-Verbose -Message 'Read the Config'

         $null = (Get-UniFiConfig)
         #endregion ReadConfig

         #region CertificateHandler
         Write-Verbose -Message ('Certificate check - Should be {0}' -f $ApiSelfSignedCert)

         [Net.ServicePointManager]::ServerCertificateValidationCallback = {
            $ApiSelfSignedCert
         }
         #endregion CertificateHandler

         #region SetRequestHeader
         Write-Verbose -Message 'Set the API Call default Header'

         $null = (Set-UniFiDefaultRequestHeader)
         #endregion SetRequestHeader

         #region SetRequestURI
         Write-Verbose -Message 'Create the Request URI'

         $ApiRequestUri = $ApiUri + 's/' + $UnifiSite + '/rest/networkconf/' + $UnifiNetwork

         Write-Verbose -Message ('URI: {0}' -f $ApiRequestUri)
         #endregion SetRequestURI

         #region Request
         Write-Verbose -Message 'Send the Request'
         $paramInvokeRestMethod = @{
            Method        = 'Put'
            Uri           = $ApiRequestUri
            Body          = $UniFiBody
            Headers       = $RestHeader
            ErrorAction   = 'SilentlyContinue'
            WarningAction = 'SilentlyContinue'
            WebSession    = $RestSession
         }
         $Session = (Invoke-RestMethod @paramInvokeRestMethod)

         Write-Verbose -Message "Session Meta: $(($Session.meta.rc | Out-String).Trim())"
         Write-Verbose -Message "Session Data: $("`n" + ($Session.data | Out-String).Trim())"
         #endregion Request
      }
      catch
      {
         # Try to Logout
         try
         {
            $null = (Invoke-UniFiApiLogout -ErrorAction SilentlyContinue -WarningAction SilentlyContinue)
         }
         catch
         {
            # We don't care about that
            Write-Verbose -Message 'Logout failed'
         }

         #region ErrorHandler
         # get error record
         [Management.Automation.ErrorRecord]$e = $_

         # retrieve information about runtime error
         $info = [PSCustomObject]@{
            Exception = $e.Exception.Message
            Reason    = $e.CategoryInfo.Reason
            Target    = $e.CategoryInfo.TargetName
            Script    = $e.InvocationInfo.ScriptName
            Line      = $e.InvocationInfo.ScriptLineNumber
            Column    = $e.InvocationInfo.OffsetInLine
         }

         Write-Verbose -Message $info

         Write-Error -Message ($info.Exception) -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
         #endregion ErrorHandler
      }
      finally
      {
         #region ResetSslTrust
         # Reset the SSL Trust (make sure everything is back to default)
         [Net.ServicePointManager]::ServerCertificateValidationCallback = $null
         #endregion ResetSslTrust
      }

      # check result
      if ($Session.meta.rc -ne 'ok')
      {
         # Verbose stuff
         $Script:line = $_.InvocationInfo.ScriptLineNumber
         Write-Verbose -Message ('Error was in Line {0}' -f $line)
         Write-Verbose -Message ('Error was {0}' -f $Session.meta.rc)

         # Error Message
         Write-Error -Message 'Unable to Login' -ErrorAction Stop

         # Only here to catch a global ErrorAction overwrite
         break
      }
   }

   end
   {
      # Dump the Result
      $Session.data

      # Cleanup
      $Session = $null

      #region RestoreProgressPreference
      $ProgressPreference = $ExistingProgressPreference
      #endregion RestoreProgressPreference

      Write-Verbose -Message 'Done Set-UnifiNetworkDetails'
   }
}
#endregion ModulePublicFunctions

#region CHANGELOG
<#
      Soon
#>
#endregion CHANGELOG

#region LICENSE
<#
      Copyright 2018 by enabling Technology - http://enatec.io
 
      Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
      1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
      2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
      3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
 
      THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
      By using the Software, you agree to the License, Terms and Conditions above!
#>
#endregion LICENSE

#region DISCLAIMER
<#
      DISCLAIMER:
      - Use at your own risk, etc.
      - This is open-source software, if you find an issue try to fix it yourself. There is no support and/or warranty in any kind
      - This is a third-party Software
      - The developer of this Software is NOT sponsored by or affiliated with Microsoft Corp (MSFT) or any of its subsidiaries in any way
      - The developer of this Software is NOT sponsored by or affiliated with Ubiquiti Networks, Inc (UBNT) or any of its subsidiaries in any way
      - The Software is not supported by Microsoft Corp (MSFT)
      - The Software is not supported by Ubiquiti Networks, Inc (UBNT)
      - By using the Software, you agree to the License, Terms, and any Conditions declared and described above
      - If you disagree with any of the Terms, and any Conditions declared: Just delete it and build your own solution
#>
#endregion DISCLAIMER

$ThisModuleLoaded = $true