VMware.VMC.psm1
|
Function Get-VMCCommand { <# .NOTES =========================================================================== Created by: VMware Date: 11/17/2017 Organization: VMware Blog: http://vmware.com/go/powercli Twitter: @powercli =========================================================================== .SYNOPSIS Returns all cmdlets for VMware Cloud on AWS .DESCRIPTION This cmdlet will allow you to return all cmdlets included in the VMC module .EXAMPLE Get-VMCCommand .EXAMPLE Get-Command -Module VMware.VMC .NOTES You can either use this cmdlet or the Get-Command cmdlet as seen in Example 2 #> Get-command -Module VMware.VimAutomation.Vmc Get-Command -Module VMware.VMC } Function Connect-VMCVIServer { <# .NOTES =========================================================================== Created by: VMware Date: 11/17/2017 Organization: VMware Blog: http://vmware.com/go/powercli Twitter: @powercli =========================================================================== .SYNOPSIS Cmdlet to connect to your VMC vCenter Server .DESCRIPTION This will connect you to both the VMC ViServer as well as the CiSServer at the same time. .EXAMPLE Connect-VMCVIServer -Server <VMC vCenter address> -User <Username> -Password <Password> .NOTES Easiest way is to pipe through your credentials from Get-VMCSDDCDefaultCredential #> Param ( [Parameter(Mandatory=$true)]$Org, [Parameter(Mandatory=$true)]$Sddc, [switch]$Autologin ) If (-Not $global:DefaultVMCServers) { Write-error "No VMC Connection found, please use the Connect-VMC to connect" } Else { $creds = Get-VMCSDDCDefaultCredential -Org $Org -Sddc $Sddc Write-Host "Connecting to VMC vCenter Server" $creds.vc_public_ip Connect-VIServer -Server $creds.vc_public_ip -User $creds.cloud_username -Password $creds.cloud_password | Add-Member -MemberType Noteproperty -Name Location -Value "VMC" Write-Host "Connecting to VMC CIS Endpoint" $creds.vc_public_ip Connect-CisServer -Server $creds.vc_public_ip -User $creds.cloud_username -Password $creds.cloud_password | Add-Member -MemberType Noteproperty -Name Location -Value "VMC" } } Function Get-VMCOrg { <# .NOTES =========================================================================== Created by: VMware Date: 11/17/2017 Organization: VMware Blog: http://vmware.com/go/powercli Twitter: @powercli =========================================================================== .SYNOPSIS Return the Orgs that you are a part of .DESCRIPTION Depending on what you've purchased, you may be a part of one or more VMC Orgs. This will return your orgs .EXAMPLE Get-VMCOrg .EXAMPLE Get-VMCOrg -Name <Org Name> .NOTES Return all the info about the orgs you are a part of #> Param ( [Parameter(Mandatory=$false)]$Name ) If (-Not $global:DefaultVMCServers) { Write-error "No VMC Connection found, please use Connect-VMC to connect" } Else { $orgService = Get-VMCService com.vmware.vmc.orgs if ($PSBoundParameters.ContainsKey("Name")){ $orgs = $orgService.list() | Where {$_.display_name -match $Name} } Else { $orgs = $orgService.list() } $Orgs | Select display_name, name, user_name, created, id } } Function Get-VMCSDDC { <# .NOTES =========================================================================== Created by: VMware Date: 11/17/2017 Organization: VMware Blog: http://vmware.com/go/powercli Twitter: @powercli =========================================================================== .SYNOPSIS Returns all of the SDDCs you are associated to .DESCRIPTION Returns all of the SDDCs ayou are associated to .EXAMPLE Get-VMCSDDC -Org <Org Name> .EXAMPLE Get-VMCSDDC -Name <SDDC Name> -Org <Org Name> #> Param ( [Parameter(Mandatory=$True)]$Org, [Parameter(Mandatory=$false)]$Name ) If (-Not $global:DefaultVMCServers) { Write-error "No VMC Connection found, please use the Connect-VMC to connect" } Else { if ($PSBoundParameters.ContainsKey("Org")){ $orgs = Get-VMCOrg -Name $Org } else { $orgs = Get-VMCOrg } foreach ($org in $orgs) { $orgID = $org.ID $sddcService = Get-VMCService com.vmware.vmc.orgs.sddcs if ($PSBoundParameters.ContainsKey("Name")){ $sddcService.list($OrgID) | Where {$_.name -match $Name} } Else { $sddcService.list($OrgID) } } } } Function Get-VMCTask { <# .NOTES =========================================================================== Created by: VMware Date: 11/17/2017 Organization: VMware Blog: http://vmware.com/go/powercli Twitter: @powercli =========================================================================== .SYNOPSIS Returns all of the VMC Tasks .DESCRIPTION Returns all of the VMC Tasks that have either occurred or are in process .EXAMPLE Get-VMCTask #> Param ( [Parameter(Mandatory=$True)]$Org ) If (-Not $global:DefaultVMCServers) { Write-error "No VMC Connection found, please use the Connect-VMC to connect" } Else { if ($PSBoundParameters.ContainsKey("Org")){ $orgs = Get-VMCOrg -Name $Org } else { $orgs = Get-VMCOrg } foreach ($org in $orgs) { $orgID = $org.ID $taskService = Get-VMCService com.vmware.vmc.orgs.tasks $taskService.list($OrgID) | Select * -ExcludeProperty Help } } } Function Get-VMCSDDCDefaultCredential { <# .NOTES =========================================================================== Created by: VMware Date: 11/17/2017 Organization: VMware Blog: http://vmware.com/go/powercli Twitter: @powercli =========================================================================== .SYNOPSIS Returns the default credential for the SDDC .DESCRIPTION Returns the default credential for the sddc .EXAMPLE Get-VMCSDDCDefaultCredential -Org <Org Name> .EXAMPLE Get-VMCSDDCDefaultCredential -Sddc <SDDC Name> -Org <Org Name> #> Param ( [Parameter(Mandatory=$true)]$Org, [Parameter(Mandatory=$false)]$Sddc ) If (-Not $global:DefaultVMCServers) { Write-error "No VMC Connection found, please use the Connect-VMC to connect" } Else { if ($PSBoundParameters.ContainsKey("Sddc")){ $sddcs = Get-VMCSDDC -Name $Sddc -Org $Org } else { $sddcs = Get-VMCSDDC -Org $Org } foreach ($sddc in $sddcs) { $sddc.resource_config | Select-object vc_url, vc_management_ip, vc_public_ip, cloud_username, cloud_password } } } Function Get-VMCSDDCPublicIP { <# .NOTES =========================================================================== Created by: VMware Date: 11/17/2017 Organization: VMware Blog: http://vmware.com/go/powercli Twitter: @powercli =========================================================================== .SYNOPSIS Returns your Public IPs .DESCRIPTION Returns your Public IPs .EXAMPLE Get-VMCSDDCPublicIP -Org <Org Name> .EXAMPLE Get-VMCSDDCPublicIP -Sddc <SDDC Name> -Org <Org Name> .NOTES Return your Public IPs that you have assigned to your account #> Param ( [Parameter(Mandatory=$true)]$Org, [Parameter(Mandatory=$false)]$Sddc ) If (-Not $global:DefaultVMCServers) { Write-error "No VMC Connection found, please use the Connect-VMC to connect" } Else { if ($PSBoundParameters.ContainsKey("Sddc")){ $sddcs = Get-VMCSDDC -Name $Sddc -Org $Org } else { $sddcs = Get-VMCSDDC -Org $Org } foreach ($sddc in $sddcs) { $sddc.resource_config.Public_ip_pool } } } Function Get-VMCVMHost { Param ( [Parameter(Mandatory=$false)]$Sddc, [Parameter(Mandatory=$true)]$Org ) If (-Not $global:DefaultVMCServers) { Write-error "No VMC Connection found, please use the Connect-VMC to connect" } Else { if ($PSBoundParameters.ContainsKey("Sddc")){ $sddcs = Get-VMCSDDC -Name $Sddc -Org $Org } else { $sddcs = Get-VMCSDDC -Org $Org } $results = @() foreach ($sddc in $sddcs) { foreach ($vmhost in $sddc.resource_config.esx_hosts) { $tmp = [pscustomobject] @{ esx_id = $vmhost.esx_id; name = $vmhost.name; hostname = $vmhost.hostname; esx_state = $vmhost.esx_state; sddc_id = $sddc.id; org_id = $sddc.org_id; } $results += $tmp } $results } } } Function Get-VMCSDDCVersion { <# .NOTES =========================================================================== Created by: VMware Date: 11/17/2017 Organization: VMware Blog: http://vmware.com/go/powercli Twitter: @powercli =========================================================================== .SYNOPSIS Returns SDDC Version .DESCRIPTION Returns Version of the SDDC .EXAMPLE Get-VMCSDDCVersion -Name <SDDC Name> -Org <Org Name> #> Param ( [Parameter(Mandatory=$True)]$Org, [Parameter(Mandatory=$false)]$Name ) If (-Not $global:DefaultVMCServers) { Write-error "No VMC Connection found, please use the Connect-VMC to connect" } Else { if ($PSBoundParameters.ContainsKey("Org")){ $orgs = Get-VMCOrg -Name $Org } else { $orgs = Get-VMCOrg } foreach ($org in $orgs) { $orgID = $org.ID $sddcService = Get-VMCService com.vmware.vmc.orgs.sddcs if ($PSBoundParameters.ContainsKey("Name")){ ($sddcService.list($OrgID) | Where {$_.name -match $Name}).resource_config.sddc_manifest | Select *version } Else { ($sddcService.list($OrgID)).resource_config.sddc_manifest | Select *version } } } } Function Get-VMCFirewallRule { <# .NOTES =========================================================================== Created by: William Lam Date: 11/19/2017 Organization: VMware Blog: https://www.virtuallyghetto.com Twitter: @lamw =========================================================================== .SYNOPSIS Retruns VMC Firewall Rules for a given Gateway (MGW or CGW) .DESCRIPTION Retruns VMC Firewall Rules for a given Gateway (MGW or CGW) .EXAMPLE Get-VMCFirewallRule -OrgName <Org Name> -SDDCName <SDDC Name> -GatewayType <MGW or CGW> .EXAMPLE Get-VMCFirewallRule -OrgName <Org Name> -SDDCName <SDDC Name> -GatewayType <MGW or CGW> -ShowAll #> param( [Parameter(Mandatory=$false)][String]$SDDCName, [Parameter(Mandatory=$false)][String]$OrgName, [Parameter(Mandatory=$false)][Switch]$ShowAll, [Parameter(Mandatory=$true)][ValidateSet("MGW","CGW")][String]$GatewayType ) if($GatewayType -eq "MGW") { $EdgeId = "edge-1" } else { $EdgeId = "edge-2" } $orgId = (Get-VMCOrg -Name $OrgName).Id $sddcId = (Get-VMCSDDC -Name $SDDCName -Org $OrgName).Id $firewallConfigService = Get-VmcService com.vmware.vmc.orgs.sddcs.networks.edges.firewall.config $firewallRules = ($firewallConfigService.get($orgId, $sddcId, $EdgeId)).firewall_rules.firewall_rules if(-not $ShowAll) { $firewallRules = $firewallRules | where { $_.rule_type -ne "default_policy" -and $_.rule_type -ne "internal_high" -and $_.name -ne "vSphere Cluster HA" -and $_.name -ne "Outbound Access" } | Sort-Object -Property rule_tag } else { $firewallRules = $firewallRules | Sort-Object -Property rule_tag } $results = @() foreach ($firewallRule in $firewallRules) { if($firewallRule.source.ip_address.Count -ne 0) { $source = $firewallRule.source.ip_address } else { $source = "ANY" } if($firewallRule.application.service.protocol -ne $null) { $protocol = $firewallRule.application.service.protocol } else { $protocol = "ANY" } if($firewallRule.application.service.port -ne $null) { $port = $firewallRule.application.service.port } else { $port = "ANY" } $tmp = [pscustomobject] @{ ID = $firewallRule.rule_id; Name = $firewallRule.name; Type = $firewallRule.rule_type; Action = $firewallRule.action; Protocol = $protocol; Port = $port; SourceAddress = $source DestinationAddress = $firewallRule.destination.ip_address; } $results+=$tmp } $results } Function Export-VMCFirewallRule { <# .NOTES =========================================================================== Created by: William Lam Date: 11/19/2017 Organization: VMware Blog: https://www.virtuallyghetto.com Twitter: @lamw =========================================================================== .SYNOPSIS Exports all "customer" created VMC Firewall Rules to JSON file .DESCRIPTION Exports all "customer" created VMC Firewall Rules to JSON file .EXAMPLE Export-VMCFirewallRule -OrgName <Org Name> -SDDCName <SDDC Name> -GatewayType <MGW or CGW> -Path "C:\Users\lamw\Desktop\VMCFirewallRules.json" #> param( [Parameter(Mandatory=$false)][String]$SDDCName, [Parameter(Mandatory=$false)][String]$OrgName, [Parameter(Mandatory=$true)][ValidateSet("MGW","CGW")][String]$GatewayType, [Parameter(Mandatory=$false)][String]$Path ) if (-not $global:DefaultVMCServers) { Write-error "No VMC Connection found, please use the Connect-VMC to connect"; break } if($GatewayType -eq "MGW") { $EdgeId = "edge-1" } else { $EdgeId = "edge-2" } $orgId = (Get-VMCOrg -Name $OrgName).Id $sddcId = (Get-VMCSDDC -Name $SDDCName -Org $OrgName).Id if(-not $orgId) { Write-Host -ForegroundColor red "Unable to find Org $OrgName, please verify input" break } if(-not $sddcId) { Write-Host -ForegroundColor red "Unable to find SDDC $SDDCName, please verify input" break } $firewallConfigService = Get-VmcService com.vmware.vmc.orgs.sddcs.networks.edges.firewall.config $firewallRules = ($firewallConfigService.get($orgId, $sddcId, $EdgeId)).firewall_rules.firewall_rules if(-not $ShowAll) { $firewallRules = $firewallRules | where { $_.rule_type -ne "default_policy" -and $_.rule_type -ne "internal_high" -and $_.name -ne "vSphere Cluster HA" -and $_.name -ne "Outbound Access" } | Sort-Object -Property rule_tag } else { $firewallRules = $firewallRules | Sort-Object -Property rule_tag } $results = @() $count = 0 foreach ($firewallRule in $firewallRules) { if($firewallRule.source.ip_address.Count -ne 0) { $source = $firewallRule.source.ip_address } else { $source = "ANY" } $tmp = [pscustomobject] @{ Name = $firewallRule.name; Action = $firewallRule.action; Protocol = $firewallRule.application.service.protocol; Port = $firewallRule.application.service.port; SourcePort = $firewallRule.application.service.source_port; ICMPType = $firewallRule.application.service.icmp_type; SourceAddress = $firewallRule.source.ip_address; DestinationAddress = $firewallRule.destination.ip_address; Enabled = $firewallRule.enabled; Logging = $firewallRule.logging_enabled; } $count+=1 $results+=$tmp } if($Path) { Write-Host -ForegroundColor Green "Exporting $count VMC Firewall Rules to $Path ..." $results | ConvertTo-Json | Out-File $Path } else { $results | ConvertTo-Json } } Function Import-VMCFirewallRule { <# .NOTES =========================================================================== Created by: William Lam Date: 11/19/2017 Organization: VMware Blog: https://www.virtuallyghetto.com Twitter: @lamw =========================================================================== .SYNOPSIS Imports VMC Firewall Rules from exported JSON configuration file .DESCRIPTION Imports VMC Firewall Rules from exported JSON configuration file .EXAMPLE Import-VMCFirewallRule -OrgName <Org Name> -SDDCName <SDDC Name> -GatewayType <MGW or CGW> -Path "C:\Users\lamw\Desktop\VMCFirewallRules.json" #> param( [Parameter(Mandatory=$false)][String]$SDDCName, [Parameter(Mandatory=$false)][String]$OrgName, [Parameter(Mandatory=$true)][ValidateSet("MGW","CGW")][String]$GatewayType, [Parameter(Mandatory=$false)][String]$Path ) if (-not $global:DefaultVMCServers) { Write-error "No VMC Connection found, please use the Connect-VMC to connect"; break } if($GatewayType -eq "MGW") { $EdgeId = "edge-1" } else { $EdgeId = "edge-2" } $orgId = (Get-VMCOrg -Name $OrgName).Id $sddcId = (Get-VMCSDDC -Name $SDDCName -Org $OrgName).Id if(-not $orgId) { Write-Host -ForegroundColor red "Unable to find Org $OrgName, please verify input" break } if(-not $sddcId) { Write-Host -ForegroundColor red "Unable to find SDDC $SDDCName, please verify input" break } $firewallService = Get-VmcService com.vmware.vmc.orgs.sddcs.networks.edges.firewall.config.rules $vmcFirewallRulesJSON = Get-Content -Raw $Path | ConvertFrom-Json # Create top level Firewall Rules Object $firewallRules = $firewallService.Help.add.firewall_rules.Create() # Create top top level Firewall Rule Spec which will be an array of individual Firewall rules as we process them in next section $ruleSpec = $firewallService.Help.add.firewall_rules.firewall_rules.Create() foreach ($vmcFirewallRule in $vmcFirewallRulesJSON) { # Create Individual Firewall Rule Element Spec $ruleElementSpec = $firewallService.Help.add.firewall_rules.firewall_rules.Element.Create() # AppSpec $appSpec = $firewallService.Help.add.firewall_rules.firewall_rules.Element.application.Create() # ServiceSpec $serviceSpec = $firewallService.Help.add.firewall_rules.firewall_rules.Element.application.service.Element.Create() $protocol = $null if($vmcFirewallRule.Protocol -ne $null) { $protocol = $vmcFirewallRule.Protocol } $serviceSpec.protocol = $protocol # Process ICMP Type from JSON $icmpType = $null if($vmcFirewallRule.ICMPType -ne $null) { $icmpType = $vmcFirewallRule.ICMPType } $serviceSpec.icmp_type = $icmpType # Process Source Ports from JSON $sourcePorts = @() if($vmcFirewallRule.SourcePort -eq "any" -or $vmcFirewallRule.SourcePort -ne $null) { foreach ($port in $vmcFirewallRule.SourcePort) { $sourcePorts+=$port } } else { $sourcePorts = @("any") } $serviceSpec.source_port = $sourcePorts # Process Ports from JSON $ports = @() if($vmcFirewallRule.Port -ne "null") { foreach ($port in $vmcFirewallRule.Port) { $ports+=$port } } $serviceSpec.port = $ports $addSpec = $appSpec.service.Add($serviceSpec) # Create Source Spec $srcSpec = $firewallService.Help.add.firewall_rules.firewall_rules.Element.source.Create() $srcSpec.exclude = $false # Process Source Address from JSON $sourceAddess = @() if($vmcFirewallRule.SourceAddress -ne "null") { foreach ($address in $vmcFirewallRule.SourceAddress) { $sourceAddess+=$address } } $srcSpec.ip_address = $sourceAddess; # Create Destination Spec $destSpec = $firewallService.Help.add.firewall_rules.firewall_rules.Element.destination.Create() $destSpec.exclude = $false # Process Destination Address from JSON $destinationAddess = @() if($vmcFirewallRule.DestinationAddress -ne "null") { foreach ($address in $vmcFirewallRule.DestinationAddress) { $destinationAddess+=$address } } $destSpec.ip_address = $destinationAddess # Add various specs if($vmcFirewallRule.Protocol -ne $null -and $vmcFirewallRule.port -ne $null) { $ruleElementSpec.application = $appSpec } $ruleElementSpec.source = $srcSpec $ruleElementSpec.destination = $destSpec $ruleElementSpec.rule_type = "user" # Process Enabled from JSON $fwEnabled = $false if($vmcFirewallRule.Enabled -eq "true") { $fwEnabled = $true } $ruleElementSpec.enabled = $fwEnabled # Process Logging from JSON $loggingEnabled = $false if($vmcFirewallRule.Logging -eq "true") { $loggingEnabled = $true } $ruleElementSpec.logging_enabled = $loggingEnabled $ruleElementSpec.action = $vmcFirewallRule.Action $ruleElementSpec.name = $vmcFirewallRule.Name # Add the individual FW rule spec into our overall firewall rules array Write-host "Creating VMC Firewall Rule Spec:" $vmcFirewallRule.Name "..." $ruleSpecAdd = $ruleSpec.Add($ruleElementSpec) } $firewallRules.firewall_rules = $ruleSpec Write-host "Adding VMC Firewall Rules ..." $firewallRuleAdd = $firewallService.add($orgId,$sddcId,$EdgeId,$firewallRules) } Function Remove-VMCFirewallRule { <# .NOTES =========================================================================== Created by: William Lam Date: 11/19/2017 Organization: VMware Blog: https://www.virtuallyghetto.com Twitter: @lamw =========================================================================== .SYNOPSIS Removes VMC Firewall Rule given Rule Id .DESCRIPTION Removes VMC Firewall Rule given Rule Id .EXAMPLE Remove-VMCFirewallRule -OrgName <Org Name> -SDDCName <SDDC Name> -GatewayType <MGW or CGW> -RuleId <Rule Id> #> param( [Parameter(Mandatory=$false)][String]$SDDCName, [Parameter(Mandatory=$false)][String]$OrgName, [Parameter(Mandatory=$true)][ValidateSet("MGW","CGW")][String]$GatewayType, [Parameter(Mandatory=$false)][String]$RuleId ) if (-not $global:DefaultVMCServers) { Write-error "No VMC Connection found, please use the Connect-VMC to connect"; break } if($GatewayType -eq "MGW") { $EdgeId = "edge-1" } else { $EdgeId = "edge-2" } $orgId = (Get-VMCOrg -Name $OrgName).Id $sddcId = (Get-VMCSDDC -Name $SDDCName -Org $OrgName).Id if(-not $orgId) { Write-Host -ForegroundColor red "Unable to find Org $OrgName, please verify input" break } if(-not $sddcId) { Write-Host -ForegroundColor red "Unable to find SDDC $SDDCName, please verify input" break } $firewallService = Get-VmcService com.vmware.vmc.orgs.sddcs.networks.edges.firewall.config.rules Write-Host "Removing VMC Firewall Rule Id $RuleId ..." $firewallService.delete($orgId,$sddcId,$EdgeId,$RuleId) } Function Get-VMCLogicalNetwork { <# .NOTES =========================================================================== Created by: Kyle Ruddy Date: 03/06/2018 Organization: VMware Blog: https://thatcouldbeaproblem.com Twitter: @kmruddy =========================================================================== .SYNOPSIS Retruns VMC Logical Networks for a given SDDC .DESCRIPTION Retruns VMC Logical Networks for a given SDDC .EXAMPLE Get-VMCLogicalNetwork -OrgName <Org Name> -SDDCName <SDDC Name> .EXAMPLE Get-VMCLogicalNetwork -OrgName <Org Name> -SDDCName <SDDC Name> -LogicalNetworkName <Logical Network Name> #> param( [Parameter(Mandatory=$true)][String]$SDDCName, [Parameter(Mandatory=$true)][String]$OrgName, [Parameter(Mandatory=$false)][String]$LogicalNetworkName ) $orgId = (Get-VMCOrg -Name $OrgName).Id $sddcId = (Get-VMCSDDC -Name $SDDCName -Org $OrgName).Id if(-not $orgId) { Write-Host -ForegroundColor red "Unable to find Org $OrgName, please verify input" break } if(-not $sddcId) { Write-Host -ForegroundColor red "Unable to find SDDC $SDDCName, please verify input" break } $logicalNetworkService = Get-VmcService com.vmware.vmc.orgs.sddcs.networks.logical $logicalNetworks = ($logicalNetworkService.get_0($orgId, $sddcId)).data | Sort-Object -Property id if($LogicalNetworkName) { $logicalNetworks = $logicalNetworks | Where-Object {$_.Name -eq $LogicalNetworkName} } $results = @() foreach ($logicalNetwork in $logicalNetworks) { $tmp = [pscustomobject] @{ ID = $logicalNetwork.id; Name = $logicalNetwork.name; SubnetMask = $logicalNetwork.subnets.address_groups.prefix_length; Gateway = $logicalNetwork.subnets.address_groups.primary_address; DHCPipRange = $logicalNetwork.dhcp_configs.ip_pools.ip_range; DHCPdomain = $logicalNetwork.dhcp_configs.ip_pools.domain_name; CGatewayID = $logicalNetwork.cgw_id; CGateway = $logicalNetwork.cgw_name; } $results+=$tmp } $results } Function Remove-VMCLogicalNetwork { <# .NOTES =========================================================================== Created by: Kyle Ruddy Date: 03/06/2018 Organization: VMware Blog: https://thatcouldbeaproblem.com Twitter: @kmruddy =========================================================================== .SYNOPSIS Removes Logical Network given ID .DESCRIPTION Removes Logical Network given ID .EXAMPLE Remove-VMCLogicalNetwork -OrgName <Org Name> -SDDCName <SDDC Name> -LogicalNetworkName <LogicalNetwork Name> #> [cmdletbinding(SupportsShouldProcess = $true,ConfirmImpact='High')] param( [Parameter(Mandatory=$true)][String]$SDDCName, [Parameter(Mandatory=$true)][String]$OrgName, [Parameter(Mandatory=$true)][String]$LogicalNetworkName ) if (-not $global:DefaultVMCServers) { Write-error "No VMC Connection found, please use the Connect-VMC to connect"; break } $orgId = (Get-VMCOrg -Name $OrgName).Id $sddcId = (Get-VMCSDDC -Name $SDDCName -Org $OrgName).Id $lsId = (Get-VMCLogicalNetwork -OrgName $OrgName -SDDCName $SDDCName -LogicalNetworkName $LogicalNetworkName).Id if(-not $orgId) { Write-Host -ForegroundColor red "Unable to find Org $OrgName, please verify input" break } if(-not $sddcId) { Write-Host -ForegroundColor red "Unable to find SDDC $SDDCName, please verify input" break } if(-not $lsId) { Write-Host -ForegroundColor red "Unable to find SDDC $LogicalNetworkName, please verify input" break } $logicalNetworkService = Get-VmcService com.vmware.vmc.orgs.sddcs.networks.logical $logicalNetworkService.delete($orgId,$sddcId,$lsId) } Function New-VMCLogicalNetwork { <# .NOTES =========================================================================== Created by: Kyle Ruddy Date: 03/06/2018 Organization: VMware Blog: https://thatcouldbeaproblem.com Twitter: @kmruddy =========================================================================== .SYNOPSIS Creates a new Logical Network .DESCRIPTION Creates a new Logical Network .EXAMPLE New-VMCLogicalNetwork -OrgName <Org Name> -SDDCName <SDDC Name> -LogicalNetworkName <LogicalNetwork Name> -SubnetMask <Subnet Mask Prefix> -Gateway <Gateway IP Address> #> [cmdletbinding(SupportsShouldProcess = $true,ConfirmImpact='High')] param( [Parameter(Mandatory=$true)][String]$SDDCName, [Parameter(Mandatory=$true)][String]$OrgName, [Parameter(Mandatory=$true)][String]$LogicalNetworkName, [Parameter(Mandatory=$true)][String]$SubnetMask, [Parameter(Mandatory=$true)][String]$Gateway ) if (-not $global:DefaultVMCServers) { Write-error "No VMC Connection found, please use the Connect-VMC to connect"; break } $orgId = (Get-VMCOrg -Name $OrgName).Id $sddcId = (Get-VMCSDDC -Name $SDDCName -Org $OrgName).Id if(-not $orgId) { Write-Host -ForegroundColor red "Unable to find Org $OrgName, please verify input" break } if(-not $sddcId) { Write-Host -ForegroundColor red "Unable to find SDDC $SDDCName, please verify input" break } $logicalNetworkService = Get-VmcService com.vmware.vmc.orgs.sddcs.networks.logical $logicalNetworkSpec = $logicalNetworkService.Help.create.sddc_network.Create() $logicalNetworkSpec.name = $LogicalNetworkName $logicalNetworkSpec.cgw_id = "edge-2" $logicalNetworkSpec.cgw_name = "SDDC-CGW-1" $logicalNetworkAddressGroupSpec = $logicalNetworkService.Help.create.sddc_network.subnets.address_groups.Element.Create() $logicalNetworkAddressGroupSpec.prefix_length = $SubnetMask $logicalNetworkAddressGroupSpec.primary_address = $Gateway $logicalNetworkSpec.subnets.address_groups.Add($logicalNetworkAddressGroupSpec) | Out-Null $logicalNetworkService.create($orgId, $sddcId, $logicalNetworkSpec) Get-VMCLogicalNetwork -OrgName $OrgName -SDDCName $SDDCName -LogicalNetworkName $LogicalNetworkName } Export-ModuleMember -Function 'Get-VMCCommand', 'Connect-VMCVIServer', 'Get-VMCOrg', 'Get-VMCSDDC', 'Get-VMCTask', 'Get-VMCSDDCDefaultCredential', 'Get-VMCSDDCPublicIP', 'Get-VMCVMHost', 'Get-VMCSDDCVersion', 'Get-VMCFirewallRule', 'Export-VMCFirewallRule', 'Import-VMCFirewallRule', 'Remove-VMCFirewallRule', 'Get-VMCLogicalNetwork', 'Remove-VMCLogicalNetwork', 'New-VMCLogicalNetwork' |