VaporShell.CloudFormation.psm1
|
# PSM1 Contents function Format-Json { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)] [String] $Json ) Begin { $cleaner = { param([String]$Line) Process{ [Regex]::Replace( $Line, "\\u(?<Value>[a-zA-Z0-9]{4})", { param($m)([char]([int]::Parse( $m.Groups['Value'].Value, [System.Globalization.NumberStyles]::HexNumber ))).ToString() } ) } } } Process { if ($PSVersionTable.PSVersion.Major -lt 6) { try { $indent = 0; $res = $Json -split '\n' | ForEach-Object { if ($_ -match '[\}\]]') { # This line contains ] or }, decrement the indentation level $indent-- } $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ') if ($_ -match '[\{\[]') { # This line contains [ or {, increment the indentation level $indent++ } $cleaner.Invoke($line) } $res -join "`n" } catch { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } else { ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n" } } } function Get-TrueCount { Param ( [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)] $Array ) Process { if ($array) { if ($array.Count) { $count = $array.Count } else { $count = 1 } } else { $count = 0 } } End { return $count } } function New-VSError { <# .SYNOPSIS Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError() .PARAMETER Result Allows input of an error from AWS SDK, resulting in the Exception message being parsed out. .PARAMETER String Used to create basic String message errors in the same wrapper #> [cmdletbinding(DefaultParameterSetName="Result")] param( [parameter(Position=0,ParameterSetName="Result")] $Result, [parameter(Position=0,ParameterSetName="String")] $String ) switch ($PSCmdlet.ParameterSetName) { Result { $Exception = "$($result.Exception.InnerException.Message)" } String { $Exception = "$String" } } $e = New-Object "System.Exception" $Exception $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null return $errorRecord } function ResolveS3Endpoint { <# .SYNOPSIS Resolves the S3 endpoint most appropriate for each region. #> Param ( [parameter(Mandatory=$true,Position=0)] [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")] [String] $Region ) $endpointMap = @{ "us-east-2" = "s3.us-east-2.amazonaws.com" "us-east-1" = "s3.amazonaws.com" "us-west-1" = "s3-us-west-1.amazonaws.com" "us-west-2" = "s3-us-west-2.amazonaws.com" "ca-central-1" = "s3.ca-central-1.amazonaws.com" "ap-south-1" = "s3.ap-south-1.amazonaws.com" "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com" "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com" "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com" "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com" "eu-central-1" = "s3.eu-central-1.amazonaws.com" "eu-west-1" = "s3-eu-west-1.amazonaws.com" "eu-west-2" = "s3.eu-west-2.amazonaws.com" "sa-east-1" = "s3-sa-east-1.amazonaws.com" } return $endpointMap[$Region] } function Add-VSCloudFormationHookVersionLoggingConfig { <# .SYNOPSIS Adds an AWS::CloudFormation::HookVersion.LoggingConfig resource property to the template. .DESCRIPTION Adds an AWS::CloudFormation::HookVersion.LoggingConfig resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-hookversion-loggingconfig.html .PARAMETER LogGroupName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-hookversion-loggingconfig.html#cfn-cloudformation-hookversion-loggingconfig-loggroupname UpdateType: Immutable PrimitiveType: String .PARAMETER LogRoleArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-hookversion-loggingconfig.html#cfn-cloudformation-hookversion-loggingconfig-logrolearn UpdateType: Immutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationHookVersionLoggingConfig])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $LogGroupName, [parameter(Mandatory = $false)] [object] $LogRoleArn ) Process { $obj = [CloudFormationHookVersionLoggingConfig]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudFormationHookVersionLoggingConfig' function Add-VSCloudFormationResourceVersionLoggingConfig { <# .SYNOPSIS Adds an AWS::CloudFormation::ResourceVersion.LoggingConfig resource property to the template. .DESCRIPTION Adds an AWS::CloudFormation::ResourceVersion.LoggingConfig resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-resourceversion-loggingconfig.html .PARAMETER LogGroupName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-resourceversion-loggingconfig.html#cfn-cloudformation-resourceversion-loggingconfig-loggroupname UpdateType: Immutable PrimitiveType: String .PARAMETER LogRoleArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-resourceversion-loggingconfig.html#cfn-cloudformation-resourceversion-loggingconfig-logrolearn UpdateType: Immutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationResourceVersionLoggingConfig])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $LogGroupName, [parameter(Mandatory = $false)] [object] $LogRoleArn ) Process { $obj = [CloudFormationResourceVersionLoggingConfig]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudFormationResourceVersionLoggingConfig' function Add-VSCloudFormationStackSetAutoDeployment { <# .SYNOPSIS Adds an AWS::CloudFormation::StackSet.AutoDeployment resource property to the template. .DESCRIPTION Adds an AWS::CloudFormation::StackSet.AutoDeployment resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-autodeployment.html .PARAMETER Enabled Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-autodeployment.html#cfn-cloudformation-stackset-autodeployment-enabled UpdateType: Mutable PrimitiveType: Boolean .PARAMETER RetainStacksOnAccountRemoval Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-autodeployment.html#cfn-cloudformation-stackset-autodeployment-retainstacksonaccountremoval UpdateType: Mutable PrimitiveType: Boolean .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationStackSetAutoDeployment])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $Enabled, [parameter(Mandatory = $false)] [object] $RetainStacksOnAccountRemoval ) Process { $obj = [CloudFormationStackSetAutoDeployment]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudFormationStackSetAutoDeployment' function Add-VSCloudFormationStackSetDeploymentTargets { <# .SYNOPSIS Adds an AWS::CloudFormation::StackSet.DeploymentTargets resource property to the template. .DESCRIPTION Adds an AWS::CloudFormation::StackSet.DeploymentTargets resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-deploymenttargets.html .PARAMETER Accounts Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-deploymenttargets.html#cfn-cloudformation-stackset-deploymenttargets-accounts UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER OrganizationalUnitIds Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-deploymenttargets.html#cfn-cloudformation-stackset-deploymenttargets-organizationalunitids UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationStackSetDeploymentTargets])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] $Accounts, [parameter(Mandatory = $false)] $OrganizationalUnitIds ) Process { $obj = [CloudFormationStackSetDeploymentTargets]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudFormationStackSetDeploymentTargets' function Add-VSCloudFormationStackSetOperationPreferences { <# .SYNOPSIS Adds an AWS::CloudFormation::StackSet.OperationPreferences resource property to the template. .DESCRIPTION Adds an AWS::CloudFormation::StackSet.OperationPreferences resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-operationpreferences.html .PARAMETER FailureToleranceCount Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-operationpreferences.html#cfn-cloudformation-stackset-operationpreferences-failuretolerancecount UpdateType: Mutable PrimitiveType: Integer .PARAMETER FailureTolerancePercentage Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-operationpreferences.html#cfn-cloudformation-stackset-operationpreferences-failuretolerancepercentage UpdateType: Mutable PrimitiveType: Integer .PARAMETER MaxConcurrentCount Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-operationpreferences.html#cfn-cloudformation-stackset-operationpreferences-maxconcurrentcount UpdateType: Mutable PrimitiveType: Integer .PARAMETER MaxConcurrentPercentage Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-operationpreferences.html#cfn-cloudformation-stackset-operationpreferences-maxconcurrentpercentage UpdateType: Mutable PrimitiveType: Integer .PARAMETER RegionOrder Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-operationpreferences.html#cfn-cloudformation-stackset-operationpreferences-regionorder UpdateType: Mutable Type: List PrimitiveItemType: String .PARAMETER RegionConcurrencyType Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-operationpreferences.html#cfn-cloudformation-stackset-operationpreferences-regionconcurrencytype UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationStackSetOperationPreferences])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $FailureToleranceCount, [parameter(Mandatory = $false)] [object] $FailureTolerancePercentage, [parameter(Mandatory = $false)] [object] $MaxConcurrentCount, [parameter(Mandatory = $false)] [object] $MaxConcurrentPercentage, [parameter(Mandatory = $false)] $RegionOrder, [parameter(Mandatory = $false)] [object] $RegionConcurrencyType ) Process { $obj = [CloudFormationStackSetOperationPreferences]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudFormationStackSetOperationPreferences' function Add-VSCloudFormationStackSetParameter { <# .SYNOPSIS Adds an AWS::CloudFormation::StackSet.Parameter resource property to the template. .DESCRIPTION Adds an AWS::CloudFormation::StackSet.Parameter resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-parameter.html .PARAMETER ParameterKey Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-parameter.html#cfn-cloudformation-stackset-parameter-parameterkey UpdateType: Mutable PrimitiveType: String .PARAMETER ParameterValue Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-parameter.html#cfn-cloudformation-stackset-parameter-parametervalue UpdateType: Mutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationStackSetParameter])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] [object] $ParameterKey, [parameter(Mandatory = $true)] [object] $ParameterValue ) Process { $obj = [CloudFormationStackSetParameter]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudFormationStackSetParameter' function Add-VSCloudFormationStackSetStackInstances { <# .SYNOPSIS Adds an AWS::CloudFormation::StackSet.StackInstances resource property to the template. .DESCRIPTION Adds an AWS::CloudFormation::StackSet.StackInstances resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-stackinstances.html .PARAMETER DeploymentTargets Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-stackinstances.html#cfn-cloudformation-stackset-stackinstances-deploymenttargets UpdateType: Mutable Type: DeploymentTargets .PARAMETER Regions Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-stackinstances.html#cfn-cloudformation-stackset-stackinstances-regions UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER ParameterOverrides Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-stackset-stackinstances.html#cfn-cloudformation-stackset-stackinstances-parameteroverrides UpdateType: Mutable Type: List ItemType: Parameter DuplicatesAllowed: False .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationStackSetStackInstances])] [cmdletbinding()] Param( [parameter(Mandatory = $true)] $DeploymentTargets, [parameter(Mandatory = $true)] $Regions, [parameter(Mandatory = $false)] [object] $ParameterOverrides ) Process { $obj = [CloudFormationStackSetStackInstances]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudFormationStackSetStackInstances' function Add-VSCloudFormationTypeActivationLoggingConfig { <# .SYNOPSIS Adds an AWS::CloudFormation::TypeActivation.LoggingConfig resource property to the template. .DESCRIPTION Adds an AWS::CloudFormation::TypeActivation.LoggingConfig resource property to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-typeactivation-loggingconfig.html .PARAMETER LogGroupName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-typeactivation-loggingconfig.html#cfn-cloudformation-typeactivation-loggingconfig-loggroupname UpdateType: Immutable PrimitiveType: String .PARAMETER LogRoleArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-cloudformation-typeactivation-loggingconfig.html#cfn-cloudformation-typeactivation-loggingconfig-logrolearn UpdateType: Immutable PrimitiveType: String .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationTypeActivationLoggingConfig])] [cmdletbinding()] Param( [parameter(Mandatory = $false)] [object] $LogGroupName, [parameter(Mandatory = $false)] [object] $LogRoleArn ) Process { $obj = [CloudFormationTypeActivationLoggingConfig]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'Add-VSCloudFormationTypeActivationLoggingConfig' function New-VSCloudFormationCustomResource { <# .SYNOPSIS Adds an AWS::CloudFormation::CustomResource resource to the template. In a CloudFormation template, you use the AWS::CloudFormation::CustomResource or Custom::String resource type to specify custom resources. .DESCRIPTION Adds an AWS::CloudFormation::CustomResource resource to the template. In a CloudFormation template, you use the AWS::CloudFormation::CustomResource or Custom::String resource type to specify custom resources. Custom resources provide a way for you to write custom provisioning logic in CloudFormation template and have CloudFormation run it during a stack operation, such as when you create, update or delete a stack. For more information, see Custom Resources: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/template-custom-resources.html. **Note** If you use the VPC Endpoints: https://docs.aws.amazon.com/vpc/latest/userguide/vpc-endpoints.html feature, custom resources in the VPC must have access to CloudFormation-specific Amazon Simple Storage Service (Amazon S3 buckets. Custom resources must send responses to a pre-signed Amazon S3 URL. If they can't send responses to Amazon S3, CloudFormation won't receive a response and the stack operation fails. For more information, see Setting Up VPC Endpoints for AWS CloudFormation: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/cfn-vpce-bucketnames.html. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cfn-customresource.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER ServiceToken Only one property is defined by AWS for a custom resource: ServiceToken. All other properties are defined by the service provider. The service token that was given to the template developer by the service provider to access the service, such as an Amazon SNS topic ARN or Lambda function ARN. The service token must be from the same region in which you are creating the stack. Updates are not supported. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cfn-customresource.html#cfn-customresource-servicetoken PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationCustomResource])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $ServiceToken, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationCustomResource]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationCustomResource' function New-VSCloudFormationHookDefaultVersion { <# .SYNOPSIS Adds an AWS::CloudFormation::HookDefaultVersion resource to the template. .DESCRIPTION Adds an AWS::CloudFormation::HookDefaultVersion resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hookdefaultversion.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER TypeVersionArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hookdefaultversion.html#cfn-cloudformation-hookdefaultversion-typeversionarn UpdateType: Mutable PrimitiveType: String .PARAMETER TypeName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hookdefaultversion.html#cfn-cloudformation-hookdefaultversion-typename UpdateType: Mutable PrimitiveType: String .PARAMETER VersionId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hookdefaultversion.html#cfn-cloudformation-hookdefaultversion-versionid UpdateType: Mutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationHookDefaultVersion])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $TypeVersionArn, [parameter(Mandatory = $false)] [object] $TypeName, [parameter(Mandatory = $false)] [object] $VersionId, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationHookDefaultVersion]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationHookDefaultVersion' function New-VSCloudFormationHookTypeConfig { <# .SYNOPSIS Adds an AWS::CloudFormation::HookTypeConfig resource to the template. .DESCRIPTION Adds an AWS::CloudFormation::HookTypeConfig resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hooktypeconfig.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER TypeArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hooktypeconfig.html#cfn-cloudformation-hooktypeconfig-typearn UpdateType: Immutable PrimitiveType: String .PARAMETER TypeName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hooktypeconfig.html#cfn-cloudformation-hooktypeconfig-typename UpdateType: Mutable PrimitiveType: String .PARAMETER Configuration Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hooktypeconfig.html#cfn-cloudformation-hooktypeconfig-configuration UpdateType: Mutable PrimitiveType: String .PARAMETER ConfigurationAlias Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hooktypeconfig.html#cfn-cloudformation-hooktypeconfig-configurationalias UpdateType: Immutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationHookTypeConfig])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $TypeArn, [parameter(Mandatory = $false)] [object] $TypeName, [parameter(Mandatory = $true)] [object] $Configuration, [parameter(Mandatory = $false)] [object] $ConfigurationAlias, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationHookTypeConfig]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationHookTypeConfig' function New-VSCloudFormationHookVersion { <# .SYNOPSIS Adds an AWS::CloudFormation::HookVersion resource to the template. .DESCRIPTION Adds an AWS::CloudFormation::HookVersion resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hookversion.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER ExecutionRoleArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hookversion.html#cfn-cloudformation-hookversion-executionrolearn UpdateType: Immutable PrimitiveType: String .PARAMETER LoggingConfig Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hookversion.html#cfn-cloudformation-hookversion-loggingconfig UpdateType: Immutable Type: LoggingConfig .PARAMETER SchemaHandlerPackage Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hookversion.html#cfn-cloudformation-hookversion-schemahandlerpackage UpdateType: Immutable PrimitiveType: String .PARAMETER TypeName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-hookversion.html#cfn-cloudformation-hookversion-typename UpdateType: Immutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationHookVersion])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $ExecutionRoleArn, [parameter(Mandatory = $false)] $LoggingConfig, [parameter(Mandatory = $true)] [object] $SchemaHandlerPackage, [parameter(Mandatory = $true)] [object] $TypeName, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationHookVersion]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationHookVersion' function New-VSCloudFormationMacro { <# .SYNOPSIS Adds an AWS::CloudFormation::Macro resource to the template. The AWS::CloudFormation::Macro resource is an CloudFormation resource type that creates an CloudFormation macro to perform custom processing on CloudFormation templates. For more information, see Using AWS CloudFormation Macros to Perform Custom Processing on Templates: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/template-macros.html. .DESCRIPTION Adds an AWS::CloudFormation::Macro resource to the template. The AWS::CloudFormation::Macro resource is an CloudFormation resource type that creates an CloudFormation macro to perform custom processing on CloudFormation templates. For more information, see Using AWS CloudFormation Macros to Perform Custom Processing on Templates: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/template-macros.html. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-macro.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Description A description of the macro. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-macro.html#cfn-cloudformation-macro-description PrimitiveType: String UpdateType: Mutable .PARAMETER FunctionName The Amazon Resource Name ARN of the underlying AWS Lambda function that you want AWS CloudFormation to invoke when the macro is run. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-macro.html#cfn-cloudformation-macro-functionname PrimitiveType: String UpdateType: Mutable .PARAMETER LogGroupName The Amazon CloudWatch log group to which AWS CloudFormation sends error logging information when invoking the macro's underlying AWS Lambda function. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-macro.html#cfn-cloudformation-macro-loggroupname PrimitiveType: String UpdateType: Mutable .PARAMETER LogRoleARN The ARN of the role AWS CloudFormation should assume when sending log entries to CloudWatch logs. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-macro.html#cfn-cloudformation-macro-logrolearn PrimitiveType: String UpdateType: Mutable .PARAMETER Name The name of the macro. The name of the macro must be unique across all macros in the account. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-macro.html#cfn-cloudformation-macro-name PrimitiveType: String UpdateType: Immutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationMacro])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $true)] [object] $FunctionName, [parameter(Mandatory = $false)] [object] $LogGroupName, [parameter(Mandatory = $false)] [object] $LogRoleARN, [parameter(Mandatory = $true)] [object] $Name, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationMacro]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationMacro' function New-VSCloudFormationModuleDefaultVersion { <# .SYNOPSIS Adds an AWS::CloudFormation::ModuleDefaultVersion resource to the template. .DESCRIPTION Adds an AWS::CloudFormation::ModuleDefaultVersion resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-moduledefaultversion.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Arn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-moduledefaultversion.html#cfn-cloudformation-moduledefaultversion-arn UpdateType: Immutable PrimitiveType: String .PARAMETER ModuleName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-moduledefaultversion.html#cfn-cloudformation-moduledefaultversion-modulename UpdateType: Immutable PrimitiveType: String .PARAMETER VersionId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-moduledefaultversion.html#cfn-cloudformation-moduledefaultversion-versionid UpdateType: Immutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationModuleDefaultVersion])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Arn, [parameter(Mandatory = $false)] [object] $ModuleName, [parameter(Mandatory = $false)] [object] $VersionId, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationModuleDefaultVersion]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationModuleDefaultVersion' function New-VSCloudFormationModuleVersion { <# .SYNOPSIS Adds an AWS::CloudFormation::ModuleVersion resource to the template. .DESCRIPTION Adds an AWS::CloudFormation::ModuleVersion resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-moduleversion.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER ModuleName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-moduleversion.html#cfn-cloudformation-moduleversion-modulename UpdateType: Immutable PrimitiveType: String .PARAMETER ModulePackage Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-moduleversion.html#cfn-cloudformation-moduleversion-modulepackage UpdateType: Immutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationModuleVersion])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $ModuleName, [parameter(Mandatory = $true)] [object] $ModulePackage, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationModuleVersion]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationModuleVersion' function New-VSCloudFormationPublicTypeVersion { <# .SYNOPSIS Adds an AWS::CloudFormation::PublicTypeVersion resource to the template. .DESCRIPTION Adds an AWS::CloudFormation::PublicTypeVersion resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-publictypeversion.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Arn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-publictypeversion.html#cfn-cloudformation-publictypeversion-arn UpdateType: Immutable PrimitiveType: String .PARAMETER PublicVersionNumber Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-publictypeversion.html#cfn-cloudformation-publictypeversion-publicversionnumber UpdateType: Immutable PrimitiveType: String .PARAMETER TypeName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-publictypeversion.html#cfn-cloudformation-publictypeversion-typename UpdateType: Immutable PrimitiveType: String .PARAMETER LogDeliveryBucket Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-publictypeversion.html#cfn-cloudformation-publictypeversion-logdeliverybucket UpdateType: Immutable PrimitiveType: String .PARAMETER Type Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-publictypeversion.html#cfn-cloudformation-publictypeversion-type UpdateType: Immutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationPublicTypeVersion])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Arn, [parameter(Mandatory = $false)] [object] $PublicVersionNumber, [parameter(Mandatory = $false)] [object] $TypeName, [parameter(Mandatory = $false)] [object] $LogDeliveryBucket, [parameter(Mandatory = $false)] [object] $Type, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationPublicTypeVersion]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationPublicTypeVersion' function New-VSCloudFormationPublisher { <# .SYNOPSIS Adds an AWS::CloudFormation::Publisher resource to the template. .DESCRIPTION Adds an AWS::CloudFormation::Publisher resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-publisher.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER AcceptTermsAndConditions Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-publisher.html#cfn-cloudformation-publisher-accepttermsandconditions UpdateType: Immutable PrimitiveType: Boolean .PARAMETER ConnectionArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-publisher.html#cfn-cloudformation-publisher-connectionarn UpdateType: Immutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationPublisher])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $AcceptTermsAndConditions, [parameter(Mandatory = $false)] [object] $ConnectionArn, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationPublisher]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationPublisher' function New-VSCloudFormationResourceDefaultVersion { <# .SYNOPSIS Adds an AWS::CloudFormation::ResourceDefaultVersion resource to the template. .DESCRIPTION Adds an AWS::CloudFormation::ResourceDefaultVersion resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-resourcedefaultversion.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER TypeVersionArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-resourcedefaultversion.html#cfn-cloudformation-resourcedefaultversion-typeversionarn UpdateType: Mutable PrimitiveType: String .PARAMETER TypeName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-resourcedefaultversion.html#cfn-cloudformation-resourcedefaultversion-typename UpdateType: Mutable PrimitiveType: String .PARAMETER VersionId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-resourcedefaultversion.html#cfn-cloudformation-resourcedefaultversion-versionid UpdateType: Mutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationResourceDefaultVersion])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $TypeVersionArn, [parameter(Mandatory = $false)] [object] $TypeName, [parameter(Mandatory = $false)] [object] $VersionId, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationResourceDefaultVersion]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationResourceDefaultVersion' function New-VSCloudFormationResourceVersion { <# .SYNOPSIS Adds an AWS::CloudFormation::ResourceVersion resource to the template. .DESCRIPTION Adds an AWS::CloudFormation::ResourceVersion resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-resourceversion.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER ExecutionRoleArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-resourceversion.html#cfn-cloudformation-resourceversion-executionrolearn UpdateType: Immutable PrimitiveType: String .PARAMETER LoggingConfig Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-resourceversion.html#cfn-cloudformation-resourceversion-loggingconfig UpdateType: Immutable Type: LoggingConfig .PARAMETER SchemaHandlerPackage Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-resourceversion.html#cfn-cloudformation-resourceversion-schemahandlerpackage UpdateType: Immutable PrimitiveType: String .PARAMETER TypeName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-resourceversion.html#cfn-cloudformation-resourceversion-typename UpdateType: Immutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationResourceVersion])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $ExecutionRoleArn, [parameter(Mandatory = $false)] $LoggingConfig, [parameter(Mandatory = $true)] [object] $SchemaHandlerPackage, [parameter(Mandatory = $true)] [object] $TypeName, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationResourceVersion]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationResourceVersion' function New-VSCloudFormationStack { <# .SYNOPSIS Adds an AWS::CloudFormation::Stack resource to the template. The AWS::CloudFormation::Stack type nests a stack as a resource in a top-level template. .DESCRIPTION Adds an AWS::CloudFormation::Stack resource to the template. The AWS::CloudFormation::Stack type nests a stack as a resource in a top-level template. You can add output values from a nested stack within the containing template. You use the GetAtt: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/intrinsic-function-reference-getatt.html function with the nested stack's logical name and the name of the output value in the nested stack in the format Outputs.NestedStackOutputName. **Important** We strongly recommend that updates to nested stacks are run from the parent stack. When you apply template changes to update a top-level stack, CloudFormation updates the top-level stack and initiates an update to its nested stacks. CloudFormation updates the resources of modified nested stacks, but does not update the resources of unmodified nested stacks. For more information, see CloudFormation Stacks Updates: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-updating-stacks.html. **Note** You must acknowledge IAM capabilities for nested stacks that contain IAM resources. Also, verify that you have cancel update stack permissions, which is required if an update rolls back. For more information about IAM and CloudFormation, see Controlling Access with AWS Identity and Access Management: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-iam-template.html. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-stack.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER NotificationARNs The Simple Notification Service SNS topic ARNs to publish stack related events. You can find your SNS topic ARNs using the SNS console or your Command Line Interface CLI. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-stack.html#cfn-cloudformation-stack-notificationarns DuplicatesAllowed: False PrimitiveItemType: String Type: List UpdateType: Mutable .PARAMETER Parameters The set value pairs that represent the parameters passed to CloudFormation when this nested stack is created. Each parameter has a name corresponding to a parameter defined in the embedded template and a value representing the value that you want to set for the parameter. If you use the Ref function to pass a parameter value to a nested stack, comma-delimited list parameters must be of type String. In other words, you cannot pass values that are of type CommaDelimitedList to nested stacks. Conditional. Required if the nested stack requires input parameters. Whether an update causes interruptions depends on the resources that are being updated. An update never causes a nested stack to be replaced. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-stack.html#cfn-cloudformation-stack-parameters DuplicatesAllowed: False PrimitiveItemType: String Type: Map UpdateType: Mutable .PARAMETER Tags Key-value pairs to associate with this stack. AWS CloudFormation also propagates these tags to the resources created in the stack. A maximum number of 50 tags can be specified. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-stack.html#cfn-cloudformation-stack-tags DuplicatesAllowed: True ItemType: Tag Type: List UpdateType: Mutable .PARAMETER TemplateURL Location of file containing the template body. The URL must point to a template max size: 460,800 bytes that is located in an Amazon S3 bucket. For more information, see Template Anatomy: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/template-anatomy.html. Whether an update causes interruptions depends on the resources that are being updated. An update never causes a nested stack to be replaced. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-stack.html#cfn-cloudformation-stack-templateurl PrimitiveType: String UpdateType: Mutable .PARAMETER TimeoutInMinutes The length of time, in minutes, that CloudFormation waits for the nested stack to reach the CREATE_COMPLETE state. The default is no timeout. When CloudFormation detects that the nested stack has reached the CREATE_COMPLETE state, it marks the nested stack resource as CREATE_COMPLETE in the parent stack and resumes creating the parent stack. If the timeout period expires before the nested stack reaches CREATE_COMPLETE, CloudFormation marks the nested stack as failed and rolls back both the nested stack and parent stack. Updates are not supported. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-stack.html#cfn-cloudformation-stack-timeoutinminutes PrimitiveType: Integer UpdateType: Mutable .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationStack])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] $NotificationARNs, [parameter(Mandatory = $false)] [IDictionary] $Parameters, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter(Mandatory = $true)] [object] $TemplateURL, [parameter(Mandatory = $false)] [object] $TimeoutInMinutes, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationStack]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationStack' function New-VSCloudFormationStackSet { <# .SYNOPSIS Adds an AWS::CloudFormation::StackSet resource to the template. .DESCRIPTION Adds an AWS::CloudFormation::StackSet resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER StackSetName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-stacksetname UpdateType: Immutable PrimitiveType: String .PARAMETER AdministrationRoleARN Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-administrationrolearn UpdateType: Mutable PrimitiveType: String .PARAMETER AutoDeployment Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-autodeployment UpdateType: Mutable Type: AutoDeployment .PARAMETER Capabilities Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-capabilities UpdateType: Mutable Type: List PrimitiveItemType: String DuplicatesAllowed: False .PARAMETER Description Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-description UpdateType: Mutable PrimitiveType: String .PARAMETER ExecutionRoleName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-executionrolename UpdateType: Mutable PrimitiveType: String .PARAMETER OperationPreferences Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-operationpreferences UpdateType: Mutable Type: OperationPreferences .PARAMETER StackInstancesGroup Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-stackinstancesgroup UpdateType: Mutable Type: List ItemType: StackInstances DuplicatesAllowed: False .PARAMETER Parameters Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-parameters UpdateType: Mutable Type: List ItemType: Parameter DuplicatesAllowed: False .PARAMETER PermissionModel Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-permissionmodel UpdateType: Immutable PrimitiveType: String .PARAMETER Tags Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-tags UpdateType: Mutable Type: List ItemType: Tag DuplicatesAllowed: False .PARAMETER TemplateBody Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-templatebody UpdateType: Mutable PrimitiveType: String .PARAMETER TemplateURL Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-templateurl UpdateType: Mutable PrimitiveType: String .PARAMETER CallAs Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-callas UpdateType: Mutable PrimitiveType: String .PARAMETER ManagedExecution Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-stackset.html#cfn-cloudformation-stackset-managedexecution UpdateType: Mutable PrimitiveType: Json .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationStackSet])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $true)] [object] $StackSetName, [parameter(Mandatory = $false)] [object] $AdministrationRoleARN, [parameter(Mandatory = $false)] $AutoDeployment, [parameter(Mandatory = $false)] $Capabilities, [parameter(Mandatory = $false)] [object] $Description, [parameter(Mandatory = $false)] [object] $ExecutionRoleName, [parameter(Mandatory = $false)] $OperationPreferences, [parameter(Mandatory = $false)] [object] $StackInstancesGroup, [parameter(Mandatory = $false)] [object] $Parameters, [parameter(Mandatory = $true)] [object] $PermissionModel, [TransformTag()] [object] [parameter(Mandatory = $false)] $Tags, [parameter(Mandatory = $false)] [object] $TemplateBody, [parameter(Mandatory = $false)] [object] $TemplateURL, [parameter(Mandatory = $false)] [object] $CallAs, [parameter(Mandatory = $false)] [VSJson] $ManagedExecution, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationStackSet]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationStackSet' function New-VSCloudFormationTypeActivation { <# .SYNOPSIS Adds an AWS::CloudFormation::TypeActivation resource to the template. .DESCRIPTION Adds an AWS::CloudFormation::TypeActivation resource to the template. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-typeactivation.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER ExecutionRoleArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-typeactivation.html#cfn-cloudformation-typeactivation-executionrolearn UpdateType: Immutable PrimitiveType: String .PARAMETER PublisherId Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-typeactivation.html#cfn-cloudformation-typeactivation-publisherid UpdateType: Immutable PrimitiveType: String .PARAMETER LoggingConfig Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-typeactivation.html#cfn-cloudformation-typeactivation-loggingconfig UpdateType: Immutable Type: LoggingConfig .PARAMETER PublicTypeArn Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-typeactivation.html#cfn-cloudformation-typeactivation-publictypearn UpdateType: Immutable PrimitiveType: String .PARAMETER AutoUpdate Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-typeactivation.html#cfn-cloudformation-typeactivation-autoupdate UpdateType: Mutable PrimitiveType: Boolean .PARAMETER TypeNameAlias Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-typeactivation.html#cfn-cloudformation-typeactivation-typenamealias UpdateType: Immutable PrimitiveType: String .PARAMETER VersionBump Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-typeactivation.html#cfn-cloudformation-typeactivation-versionbump UpdateType: Mutable PrimitiveType: String .PARAMETER MajorVersion Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-typeactivation.html#cfn-cloudformation-typeactivation-majorversion UpdateType: Mutable PrimitiveType: String .PARAMETER TypeName Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-typeactivation.html#cfn-cloudformation-typeactivation-typename UpdateType: Immutable PrimitiveType: String .PARAMETER Type Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-cloudformation-typeactivation.html#cfn-cloudformation-typeactivation-type UpdateType: Immutable PrimitiveType: String .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationTypeActivation])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $ExecutionRoleArn, [parameter(Mandatory = $false)] [object] $PublisherId, [parameter(Mandatory = $false)] $LoggingConfig, [parameter(Mandatory = $false)] [object] $PublicTypeArn, [parameter(Mandatory = $false)] [object] $AutoUpdate, [parameter(Mandatory = $false)] [object] $TypeNameAlias, [parameter(Mandatory = $false)] [object] $VersionBump, [parameter(Mandatory = $false)] [object] $MajorVersion, [parameter(Mandatory = $false)] [object] $TypeName, [parameter(Mandatory = $false)] [object] $Type, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationTypeActivation]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationTypeActivation' function New-VSCloudFormationWaitCondition { <# .SYNOPSIS Adds an AWS::CloudFormation::WaitCondition resource to the template. **Important** .DESCRIPTION Adds an AWS::CloudFormation::WaitCondition resource to the template. **Important** For Amazon EC2 and Auto Scaling resources, we recommend that you use a CreationPolicy attribute instead of wait conditions. Add a CreationPolicy attribute to those resources, and use the cfn-signal helper script to signal when an instance creation process has completed successfully. You can use a wait condition for situations like the following: + To coordinate stack resource creation with configuration actions that are external to the stack creation + To track the status of a configuration process For these situations, we recommend that you associate a CreationPolicy: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-attribute-creationpolicy.html attribute with the wait condition so that you don't have to use a wait condition handle. For more information and an example, see Creating Wait Conditions in a Template: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/using-cfn-waitcondition.html. If you use a CreationPolicy with a wait condition, do not specify any of the wait condition's properties. **Note** If you use the VPC Endpoints: https://docs.aws.amazon.com/vpc/latest/userguide/vpc-endpoints.html feature, resources in the VPC that respond to wait conditions must have access to CloudFormation-specific Amazon Simple Storage Service (Amazon S3 buckets. Resources must send wait condition responses to a pre-signed Amazon S3 URL. If they can't send responses to Amazon S3, CloudFormation won't receive a response and the stack operation fails. For more information, see Setting Up VPC Endpoints for AWS CloudFormation: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/cfn-vpce-bucketnames.html. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waitcondition.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER Count The number of success signals that CloudFormation must receive before it continues the stack creation process. When the wait condition receives the requisite number of success signals, CloudFormation resumes the creation of the stack. If the wait condition does not receive the specified number of success signals before the Timeout period expires, CloudFormation assumes that the wait condition has failed and rolls the stack back. Updates are not supported. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waitcondition.html#cfn-waitcondition-count PrimitiveType: Integer UpdateType: Mutable .PARAMETER Handle A reference to the wait condition handle used to signal this wait condition. Use the Ref intrinsic function to specify an AWS::CloudFormation::WaitConditionHandle: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waitconditionhandle.html resource. Anytime you add a WaitCondition resource during a stack update, you must associate the wait condition with a new WaitConditionHandle resource. Do not reuse an old wait condition handle that has already been defined in the template. If you reuse a wait condition handle, the wait condition might evaluate old signals from a previous create or update stack command. Updates are not supported. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waitcondition.html#cfn-waitcondition-handle PrimitiveType: String UpdateType: Mutable .PARAMETER Timeout The length of time in seconds to wait for the number of signals that the Count property specifies. Timeout is a minimum-bound property, meaning the timeout occurs no sooner than the time you specify, but can occur shortly thereafter. The maximum time that can be specified for this property is 12 hours 43200 seconds. Updates are not supported. Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waitcondition.html#cfn-waitcondition-timeout PrimitiveType: String UpdateType: Mutable .PARAMETER CreationPolicy Use the CreationPolicy attribute when you want to wait on resource configuration actions before stack creation proceeds. For example, if you install and configure software applications on an EC2 instance, you might want those applications to be running before proceeding. In such cases, you can add a CreationPolicy attribute to the instance, and then send a success signal to the instance after the applications are installed and configured. You must use the "Add-CreationPolicy" function or the [CreationPolicy] class here. .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationWaitCondition])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter(Mandatory = $false)] [object] $Count, [parameter(Mandatory = $false)] [object] $Handle, [parameter(Mandatory = $false)] [object] $Timeout, [parameter(Mandatory = $false)] [CreationPolicy] $CreationPolicy, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationWaitCondition]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationWaitCondition' function New-VSCloudFormationWaitConditionHandle { <# .SYNOPSIS Adds an AWS::CloudFormation::WaitConditionHandle resource to the template. **Important** .DESCRIPTION Adds an AWS::CloudFormation::WaitConditionHandle resource to the template. **Important** For Amazon EC2 and Auto Scaling resources, we recommend that you use a CreationPolicy attribute instead of wait conditions. Add a CreationPolicy attribute to those resources, and use the cfn-signal helper script to signal when an instance creation process has completed successfully. For more information, see Deploying Applications on Amazon EC2 with AWS CloudFormation: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/deploying.applications.html. The AWS::CloudFormation::WaitConditionHandle type has no properties. When you reference the WaitConditionHandle resource by using the Ref function, AWS CloudFormation returns a presigned URL. You pass this URL to applications or scripts that are running on your Amazon EC2 instances to send signals to that URL. An associated AWS::CloudFormation::WaitCondition resource checks the URL for the required number of success signals or for a failure signal. **Important** Anytime you add a WaitCondition resource during a stack update or update a resource with a wait condition, you must associate the wait condition with a new WaitConditionHandle resource. Do not reuse an old wait condition handle that has already been defined in the template. If you reuse a wait condition handle, the wait condition might evaluate old signals from a previous create or update stack command. **Note** Updates are not supported for this resource. .LINK http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-waitconditionhandle.html .PARAMETER LogicalId The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance. .PARAMETER DeletionPolicy With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default. To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER UpdateReplacePolicy Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation. When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource. For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance. You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources. The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets. Note Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope. UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update. You must use one of the following options: "Delete","Retain","Snapshot" .PARAMETER DependsOn With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute. This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created. .PARAMETER Metadata The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values. This will be returned when describing the resource using AWS CLI. .PARAMETER UpdatePolicy Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group. You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here. .PARAMETER Condition Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned. .FUNCTIONALITY Vaporshell #> [OutputType([CloudFormationWaitConditionHandle])] [cmdletbinding()] Param( [parameter(Mandatory = $true,Position = 0)] [ValidateLogicalId()] [string] $LogicalId, [parameter()] [DeletionPolicy] $DeletionPolicy, [parameter()] [UpdateReplacePolicy] $UpdateReplacePolicy, [parameter(Mandatory = $false)] [string[]] $DependsOn, [parameter(Mandatory = $false)] [VSJson] $Metadata, [parameter(Mandatory = $false)] [UpdatePolicy] $UpdatePolicy, [parameter(Mandatory = $false)] [string] $Condition ) Process { $obj = [CloudFormationWaitConditionHandle]::new($PSBoundParameters) Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)" Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)" $obj } } Export-ModuleMember -Function 'New-VSCloudFormationWaitConditionHandle' |