VaporShell.DirectoryService.psm1

# PSM1 Contents
function Format-Json {
    [CmdletBinding()]
    Param (
        [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)]
        [String]
        $Json
    )
    Begin {
        $cleaner = {
            param([String]$Line)
            Process{
                [Regex]::Replace(
                    $Line,
                    "\\u(?<Value>[a-zA-Z0-9]{4})",
                    {
                        param($m)([char]([int]::Parse(
                            $m.Groups['Value'].Value,
                            [System.Globalization.NumberStyles]::HexNumber
                        ))).ToString()
                    }
                )
            }
        }
    }
    Process {
        if ($PSVersionTable.PSVersion.Major -lt 6) {
            try {
                $indent = 0;
                $res = $Json -split '\n' | ForEach-Object {
                    if ($_ -match '[\}\]]') {
                        # This line contains ] or }, decrement the indentation level
                        $indent--
                    }
                    $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ')
                    if ($_ -match '[\{\[]') {
                        # This line contains [ or {, increment the indentation level
                        $indent++
                    }
                    $cleaner.Invoke($line)
                }
                $res -join "`n"
            }
            catch {
                ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n"
            }
        }
        else {
            ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n"
        }
    }
}

function Get-TrueCount {
    Param
    (
        [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)]
        $Array
    )
    Process {
        if ($array) {
            if ($array.Count) {
                $count = $array.Count
            }
            else {
                $count = 1
            }
        }
        else {
            $count = 0
        }
    }
    End {
        return $count
    }
}

function New-VSError {
    <#
    .SYNOPSIS
    Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError()
    
    .PARAMETER Result
    Allows input of an error from AWS SDK, resulting in the Exception message being parsed out.
    
    .PARAMETER String
    Used to create basic String message errors in the same wrapper
    #>

    [cmdletbinding(DefaultParameterSetName="Result")]
    param(
        [parameter(Position=0,ParameterSetName="Result")]
        $Result,
        [parameter(Position=0,ParameterSetName="String")]
        $String
    )
    switch ($PSCmdlet.ParameterSetName) {
        Result { $Exception = "$($result.Exception.InnerException.Message)" }
        String { $Exception = "$String" }
    }
    $e = New-Object "System.Exception" $Exception
    $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null
    return $errorRecord
}

function ResolveS3Endpoint {
    <#
    .SYNOPSIS
    Resolves the S3 endpoint most appropriate for each region.
    #>

    Param
    (
      [parameter(Mandatory=$true,Position=0)]
      [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")]
      [String]
      $Region
    )
    $endpointMap = @{
        "us-east-2" = "s3.us-east-2.amazonaws.com"
        "us-east-1" = "s3.amazonaws.com"
        "us-west-1" = "s3-us-west-1.amazonaws.com"
        "us-west-2" = "s3-us-west-2.amazonaws.com"
        "ca-central-1" = "s3.ca-central-1.amazonaws.com"
        "ap-south-1" = "s3.ap-south-1.amazonaws.com"
        "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com"
        "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com"
        "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com"
        "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com"
        "eu-central-1" = "s3.eu-central-1.amazonaws.com"
        "eu-west-1" = "s3-eu-west-1.amazonaws.com"
        "eu-west-2" = "s3.eu-west-2.amazonaws.com"
        "sa-east-1" = "s3-sa-east-1.amazonaws.com"
    }
    return $endpointMap[$Region]
}

function Add-VSDirectoryServiceMicrosoftADVpcSettings {
    <#
    .SYNOPSIS
        Adds an AWS::DirectoryService::MicrosoftAD.VpcSettings resource property to the template. Contains VPC information for the CreateDirectory: https://docs.aws.amazon.com/directoryservice/latest/devguide/API_CreateDirectory.html or CreateMicrosoftAD: https://docs.aws.amazon.com/directoryservice/latest/devguide/API_CreateMicrosoftAD.html operation.

    .DESCRIPTION
        Adds an AWS::DirectoryService::MicrosoftAD.VpcSettings resource property to the template.
Contains VPC information for the CreateDirectory: https://docs.aws.amazon.com/directoryservice/latest/devguide/API_CreateDirectory.html or CreateMicrosoftAD: https://docs.aws.amazon.com/directoryservice/latest/devguide/API_CreateMicrosoftAD.html operation.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-directoryservice-microsoftad-vpcsettings.html

    .PARAMETER SubnetIds
        The identifiers of the subnets for the directory servers. The two subnets must be in different Availability Zones. AWS Directory Service specifies a directory server and a DNS server in each of these subnets.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-directoryservice-microsoftad-vpcsettings.html#cfn-directoryservice-microsoftad-vpcsettings-subnetids
        DuplicatesAllowed: False
        PrimitiveItemType: String
        Type: List
        UpdateType: Mutable

    .PARAMETER VpcId
        The identifier of the VPC in which to create the directory.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-directoryservice-microsoftad-vpcsettings.html#cfn-directoryservice-microsoftad-vpcsettings-vpcid
        PrimitiveType: String
        UpdateType: Mutable

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([DirectoryServiceMicrosoftADVpcSettings])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true)]
        $SubnetIds,
        [parameter(Mandatory = $true)]
        [object]
        $VpcId
    )
    Process {
        $obj = [DirectoryServiceMicrosoftADVpcSettings]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'Add-VSDirectoryServiceMicrosoftADVpcSettings'

function Add-VSDirectoryServiceSimpleADVpcSettings {
    <#
    .SYNOPSIS
        Adds an AWS::DirectoryService::SimpleAD.VpcSettings resource property to the template. Contains VPC information for the CreateDirectory: https://docs.aws.amazon.com/directoryservice/latest/devguide/API_CreateDirectory.html or CreateMicrosoftAD: https://docs.aws.amazon.com/directoryservice/latest/devguide/API_CreateMicrosoftAD.html operation.

    .DESCRIPTION
        Adds an AWS::DirectoryService::SimpleAD.VpcSettings resource property to the template.
Contains VPC information for the CreateDirectory: https://docs.aws.amazon.com/directoryservice/latest/devguide/API_CreateDirectory.html or CreateMicrosoftAD: https://docs.aws.amazon.com/directoryservice/latest/devguide/API_CreateMicrosoftAD.html operation.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-directoryservice-simplead-vpcsettings.html

    .PARAMETER SubnetIds
        The identifiers of the subnets for the directory servers. The two subnets must be in different Availability Zones. AWS Directory Service specifies a directory server and a DNS server in each of these subnets.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-directoryservice-simplead-vpcsettings.html#cfn-directoryservice-simplead-vpcsettings-subnetids
        DuplicatesAllowed: False
        PrimitiveItemType: String
        Type: List
        UpdateType: Mutable

    .PARAMETER VpcId
        The identifier of the VPC in which to create the directory.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-directoryservice-simplead-vpcsettings.html#cfn-directoryservice-simplead-vpcsettings-vpcid
        PrimitiveType: String
        UpdateType: Mutable

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([DirectoryServiceSimpleADVpcSettings])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true)]
        $SubnetIds,
        [parameter(Mandatory = $true)]
        [object]
        $VpcId
    )
    Process {
        $obj = [DirectoryServiceSimpleADVpcSettings]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'Add-VSDirectoryServiceSimpleADVpcSettings'

function New-VSDirectoryServiceMicrosoftAD {
    <#
    .SYNOPSIS
        Adds an AWS::DirectoryService::MicrosoftAD resource to the template. The AWS::DirectoryService::MicrosoftAD resource specifies a Microsoft Active Directory in AWS so that your directory users and groups can access the AWS Management Console and AWS applications using their existing credentials. For more information, see AWS Managed Microsoft AD: https://docs.aws.amazon.com/directoryservice/latest/admin-guide/directory_microsoft_ad.html in the *AWS Directory Service Admin Guide*.

    .DESCRIPTION
        Adds an AWS::DirectoryService::MicrosoftAD resource to the template. The AWS::DirectoryService::MicrosoftAD resource specifies a Microsoft Active Directory in AWS so that your directory users and groups can access the AWS Management Console and AWS applications using their existing credentials. For more information, see AWS Managed Microsoft AD: https://docs.aws.amazon.com/directoryservice/latest/admin-guide/directory_microsoft_ad.html in the *AWS Directory Service Admin Guide*.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-microsoftad.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER CreateAlias
        Specifies an alias for a directory and assigns the alias to the directory. The alias is used to construct the access URL for the directory, such as http://<alias>.awsapps.com. By default, AWS CloudFormation does not create an alias.
After an alias has been created, it cannot be deleted or reused, so this operation should only be used when absolutely necessary.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-microsoftad.html#cfn-directoryservice-microsoftad-createalias
        PrimitiveType: Boolean
        UpdateType: Immutable

    .PARAMETER Edition
        AWS Managed Microsoft AD is available in two editions: Standard and Enterprise. Enterprise is the default.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-microsoftad.html#cfn-directoryservice-microsoftad-edition
        PrimitiveType: String
        UpdateType: Immutable

    .PARAMETER EnableSso
        Whether to enable single sign-on for a Microsoft Active Directory in AWS. Single sign-on allows users in your directory to access certain AWS services from a computer joined to the directory without having to enter their credentials separately. If you don't specify a value, AWS CloudFormation disables single sign-on by default.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-microsoftad.html#cfn-directoryservice-microsoftad-enablesso
        PrimitiveType: Boolean
        UpdateType: Mutable

    .PARAMETER Name
        The fully qualified domain name for the AWS Managed Microsoft AD directory, such as corp.example.com. This name will resolve inside your VPC only. It does not need to be publicly resolvable.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-microsoftad.html#cfn-directoryservice-microsoftad-name
        PrimitiveType: String
        UpdateType: Immutable

    .PARAMETER Password
        The password for the default administrative user named Admin.
If you need to change the password for the administrator account, see the ResetUserPassword: https://docs.aws.amazon.com/directoryservice/latest/devguide/API_ResetUserPassword.html API call in the *AWS Directory Service API Reference*.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-microsoftad.html#cfn-directoryservice-microsoftad-password
        PrimitiveType: String
        UpdateType: Immutable

    .PARAMETER ShortName
        The NetBIOS name for your domain, such as CORP. If you don't specify a NetBIOS name, it will default to the first part of your directory DNS. For example, CORP for the directory DNS corp.example.com.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-microsoftad.html#cfn-directoryservice-microsoftad-shortname
        PrimitiveType: String
        UpdateType: Immutable

    .PARAMETER VpcSettings
        Specifies the VPC settings of the Microsoft AD directory server in AWS.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-microsoftad.html#cfn-directoryservice-microsoftad-vpcsettings
        Type: VpcSettings
        UpdateType: Immutable

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([DirectoryServiceMicrosoftAD])]
    [cmdletbinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword","Password")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingUserNameAndPasswordParams","Password")]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $false)]
        [object]
        $CreateAlias,
        [parameter(Mandatory = $false)]
        [object]
        $Edition,
        [parameter(Mandatory = $false)]
        [object]
        $EnableSso,
        [parameter(Mandatory = $true)]
        [object]
        $Name,
        [parameter(Mandatory = $true)]
        [object]
        $Password,
        [parameter(Mandatory = $false)]
        [object]
        $ShortName,
        [parameter(Mandatory = $true)]
        $VpcSettings,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [DirectoryServiceMicrosoftAD]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSDirectoryServiceMicrosoftAD'

function New-VSDirectoryServiceSimpleAD {
    <#
    .SYNOPSIS
        Adds an AWS::DirectoryService::SimpleAD resource to the template. The AWS::DirectoryService::SimpleAD resource specifies an AWS Directory Service Simple Active Directory (Simple AD in AWS so that your directory users and groups can access the AWS Management Console and AWS applications using their existing credentials. Simple AD is a Microsoft Active Directory–compatible directory. For more information, see Simple Active Directory: https://docs.aws.amazon.com/directoryservice/latest/admin-guide/directory_simple_ad.html in the *AWS Directory Service Admin Guide*.

    .DESCRIPTION
        Adds an AWS::DirectoryService::SimpleAD resource to the template. The AWS::DirectoryService::SimpleAD resource specifies an AWS Directory Service Simple Active Directory (Simple AD in AWS so that your directory users and groups can access the AWS Management Console and AWS applications using their existing credentials. Simple AD is a Microsoft Active Directory–compatible directory. For more information, see Simple Active Directory: https://docs.aws.amazon.com/directoryservice/latest/admin-guide/directory_simple_ad.html in the *AWS Directory Service Admin Guide*.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-simplead.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER CreateAlias
        If set to true, specifies an alias for a directory and assigns the alias to the directory. The alias is used to construct the access URL for the directory, such as http://<alias>.awsapps.com. By default, this property is set to false.
After an alias has been created, it cannot be deleted or reused, so this operation should only be used when absolutely necessary.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-simplead.html#cfn-directoryservice-simplead-createalias
        PrimitiveType: Boolean
        UpdateType: Immutable

    .PARAMETER Description
        A description for the directory.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-simplead.html#cfn-directoryservice-simplead-description
        PrimitiveType: String
        UpdateType: Immutable

    .PARAMETER EnableSso
        Whether to enable single sign-on for a directory. If you don't specify a value, AWS CloudFormation disables single sign-on by default.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-simplead.html#cfn-directoryservice-simplead-enablesso
        PrimitiveType: Boolean
        UpdateType: Mutable

    .PARAMETER Name
        The fully qualified name for the directory, such as corp.example.com.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-simplead.html#cfn-directoryservice-simplead-name
        PrimitiveType: String
        UpdateType: Immutable

    .PARAMETER Password
        The password for the directory administrator. The directory creation process creates a directory administrator account with the user name Administrator and this password.
If you need to change the password for the administrator account, see the ResetUserPassword: https://docs.aws.amazon.com/directoryservice/latest/devguide/API_ResetUserPassword.html API call in the *AWS Directory Service API Reference*.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-simplead.html#cfn-directoryservice-simplead-password
        PrimitiveType: String
        UpdateType: Immutable

    .PARAMETER ShortName
        The NetBIOS name of the directory, such as CORP.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-simplead.html#cfn-directoryservice-simplead-shortname
        PrimitiveType: String
        UpdateType: Immutable

    .PARAMETER Size
        The size of the directory. For valid values, see CreateDirectory: https://docs.aws.amazon.com/directoryservice/latest/devguide/API_CreateDirectory.html in the *AWS Directory Service API Reference*.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-simplead.html#cfn-directoryservice-simplead-size
        PrimitiveType: String
        UpdateType: Immutable

    .PARAMETER VpcSettings
        A DirectoryVpcSettings: https://docs.aws.amazon.com/directoryservice/latest/devguide/API_DirectoryVpcSettings.html object that contains additional information for the operation.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-directoryservice-simplead.html#cfn-directoryservice-simplead-vpcsettings
        Type: VpcSettings
        UpdateType: Immutable

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([DirectoryServiceSimpleAD])]
    [cmdletbinding()]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingPlainTextForPassword","Password")]
    [Diagnostics.CodeAnalysis.SuppressMessageAttribute("PSAvoidUsingUserNameAndPasswordParams","Password")]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $false)]
        [object]
        $CreateAlias,
        [parameter(Mandatory = $false)]
        [object]
        $Description,
        [parameter(Mandatory = $false)]
        [object]
        $EnableSso,
        [parameter(Mandatory = $true)]
        [object]
        $Name,
        [parameter(Mandatory = $true)]
        [object]
        $Password,
        [parameter(Mandatory = $false)]
        [object]
        $ShortName,
        [parameter(Mandatory = $true)]
        [object]
        $Size,
        [parameter(Mandatory = $true)]
        $VpcSettings,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [DirectoryServiceSimpleAD]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSDirectoryServiceSimpleAD'