VaporShell.ECR.psm1

# PSM1 Contents
function Format-Json {
    [CmdletBinding()]
    Param (
        [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)]
        [String]
        $Json
    )
    Begin {
        $cleaner = {
            param([String]$Line)
            Process{
                [Regex]::Replace(
                    $Line,
                    "\\u(?<Value>[a-zA-Z0-9]{4})",
                    {
                        param($m)([char]([int]::Parse(
                            $m.Groups['Value'].Value,
                            [System.Globalization.NumberStyles]::HexNumber
                        ))).ToString()
                    }
                )
            }
        }
    }
    Process {
        if ($PSVersionTable.PSVersion.Major -lt 6) {
            try {
                $indent = 0;
                $res = $Json -split '\n' | ForEach-Object {
                    if ($_ -match '[\}\]]') {
                        # This line contains ] or }, decrement the indentation level
                        $indent--
                    }
                    $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ')
                    if ($_ -match '[\{\[]') {
                        # This line contains [ or {, increment the indentation level
                        $indent++
                    }
                    $cleaner.Invoke($line)
                }
                $res -join "`n"
            }
            catch {
                ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n"
            }
        }
        else {
            ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n"
        }
    }
}

function Get-TrueCount {
    Param
    (
        [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)]
        $Array
    )
    Process {
        if ($array) {
            if ($array.Count) {
                $count = $array.Count
            }
            else {
                $count = 1
            }
        }
        else {
            $count = 0
        }
    }
    End {
        return $count
    }
}

function New-VSError {
    <#
    .SYNOPSIS
    Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError()
    
    .PARAMETER Result
    Allows input of an error from AWS SDK, resulting in the Exception message being parsed out.
    
    .PARAMETER String
    Used to create basic String message errors in the same wrapper
    #>

    [cmdletbinding(DefaultParameterSetName="Result")]
    param(
        [parameter(Position=0,ParameterSetName="Result")]
        $Result,
        [parameter(Position=0,ParameterSetName="String")]
        $String
    )
    switch ($PSCmdlet.ParameterSetName) {
        Result { $Exception = "$($result.Exception.InnerException.Message)" }
        String { $Exception = "$String" }
    }
    $e = New-Object "System.Exception" $Exception
    $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null
    return $errorRecord
}

function ResolveS3Endpoint {
    <#
    .SYNOPSIS
    Resolves the S3 endpoint most appropriate for each region.
    #>

    Param
    (
      [parameter(Mandatory=$true,Position=0)]
      [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")]
      [String]
      $Region
    )
    $endpointMap = @{
        "us-east-2" = "s3.us-east-2.amazonaws.com"
        "us-east-1" = "s3.amazonaws.com"
        "us-west-1" = "s3-us-west-1.amazonaws.com"
        "us-west-2" = "s3-us-west-2.amazonaws.com"
        "ca-central-1" = "s3.ca-central-1.amazonaws.com"
        "ap-south-1" = "s3.ap-south-1.amazonaws.com"
        "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com"
        "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com"
        "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com"
        "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com"
        "eu-central-1" = "s3.eu-central-1.amazonaws.com"
        "eu-west-1" = "s3-eu-west-1.amazonaws.com"
        "eu-west-2" = "s3.eu-west-2.amazonaws.com"
        "sa-east-1" = "s3-sa-east-1.amazonaws.com"
    }
    return $endpointMap[$Region]
}

function Add-VSECRReplicationConfigurationReplicationConfiguration {
    <#
    .SYNOPSIS
        Adds an AWS::ECR::ReplicationConfiguration.ReplicationConfiguration resource property to the template.

    .DESCRIPTION
        Adds an AWS::ECR::ReplicationConfiguration.ReplicationConfiguration resource property to the template.


    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-replicationconfiguration-replicationconfiguration.html

    .PARAMETER Rules
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-replicationconfiguration-replicationconfiguration.html#cfn-ecr-replicationconfiguration-replicationconfiguration-rules
        UpdateType: Mutable
        Type: List
        ItemType: ReplicationRule

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([ECRReplicationConfigurationReplicationConfiguration])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true)]
        [object]
        $Rules
    )
    Process {
        $obj = [ECRReplicationConfigurationReplicationConfiguration]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'Add-VSECRReplicationConfigurationReplicationConfiguration'

function Add-VSECRReplicationConfigurationReplicationDestination {
    <#
    .SYNOPSIS
        Adds an AWS::ECR::ReplicationConfiguration.ReplicationDestination resource property to the template.

    .DESCRIPTION
        Adds an AWS::ECR::ReplicationConfiguration.ReplicationDestination resource property to the template.


    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-replicationconfiguration-replicationdestination.html

    .PARAMETER Region
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-replicationconfiguration-replicationdestination.html#cfn-ecr-replicationconfiguration-replicationdestination-region
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER RegistryId
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-replicationconfiguration-replicationdestination.html#cfn-ecr-replicationconfiguration-replicationdestination-registryid
        UpdateType: Mutable
        PrimitiveType: String

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([ECRReplicationConfigurationReplicationDestination])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true)]
        [object]
        $Region,
        [parameter(Mandatory = $true)]
        [object]
        $RegistryId
    )
    Process {
        $obj = [ECRReplicationConfigurationReplicationDestination]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'Add-VSECRReplicationConfigurationReplicationDestination'

function Add-VSECRReplicationConfigurationReplicationRule {
    <#
    .SYNOPSIS
        Adds an AWS::ECR::ReplicationConfiguration.ReplicationRule resource property to the template.

    .DESCRIPTION
        Adds an AWS::ECR::ReplicationConfiguration.ReplicationRule resource property to the template.


    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-replicationconfiguration-replicationrule.html

    .PARAMETER Destinations
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-replicationconfiguration-replicationrule.html#cfn-ecr-replicationconfiguration-replicationrule-destinations
        UpdateType: Mutable
        Type: List
        ItemType: ReplicationDestination

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([ECRReplicationConfigurationReplicationRule])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true)]
        [object]
        $Destinations
    )
    Process {
        $obj = [ECRReplicationConfigurationReplicationRule]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'Add-VSECRReplicationConfigurationReplicationRule'

function Add-VSECRRepositoryLifecyclePolicy {
    <#
    .SYNOPSIS
        Adds an AWS::ECR::Repository.LifecyclePolicy resource property to the template. The LifecyclePolicy property type specifies a lifecycle policy. For information about lifecycle policy syntax, see Lifecycle Policy Template: https://docs.aws.amazon.com/AmazonECR/latest/userguide/LifecyclePolicies.html.

    .DESCRIPTION
        Adds an AWS::ECR::Repository.LifecyclePolicy resource property to the template.
The LifecyclePolicy property type specifies a lifecycle policy. For information about lifecycle policy syntax, see Lifecycle Policy Template: https://docs.aws.amazon.com/AmazonECR/latest/userguide/LifecyclePolicies.html.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-repository-lifecyclepolicy.html

    .PARAMETER LifecyclePolicyText
        The JSON repository policy text to apply to the repository.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-repository-lifecyclepolicy.html#cfn-ecr-repository-lifecyclepolicy-lifecyclepolicytext
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER RegistryId
        The AWS account ID associated with the registry that contains the repository. If you do
 not specify a registry, the default registry is assumed.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-ecr-repository-lifecyclepolicy.html#cfn-ecr-repository-lifecyclepolicy-registryid
        UpdateType: Mutable
        PrimitiveType: String

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([ECRRepositoryLifecyclePolicy])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $false)]
        [object]
        $LifecyclePolicyText,
        [parameter(Mandatory = $false)]
        [object]
        $RegistryId
    )
    Process {
        $obj = [ECRRepositoryLifecyclePolicy]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'Add-VSECRRepositoryLifecyclePolicy'

function New-VSECRPublicRepository {
    <#
    .SYNOPSIS
        Adds an AWS::ECR::PublicRepository resource to the template.

    .DESCRIPTION
        Adds an AWS::ECR::PublicRepository resource to the template.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-publicrepository.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER RepositoryName
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-publicrepository.html#cfn-ecr-publicrepository-repositoryname
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER RepositoryPolicyText
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-publicrepository.html#cfn-ecr-publicrepository-repositorypolicytext
        UpdateType: Mutable
        PrimitiveType: Json

    .PARAMETER RepositoryCatalogData
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-publicrepository.html#cfn-ecr-publicrepository-repositorycatalogdata
        UpdateType: Mutable
        PrimitiveType: Json

    .PARAMETER Tags
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-publicrepository.html#cfn-ecr-publicrepository-tags
        UpdateType: Mutable
        Type: List
        ItemType: Tag
        DuplicatesAllowed: False

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([ECRPublicRepository])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $false)]
        [object]
        $RepositoryName,
        [parameter(Mandatory = $false)]
        [VSJson]
        $RepositoryPolicyText,
        [parameter(Mandatory = $false)]
        [VSJson]
        $RepositoryCatalogData,
        [TransformTag()]
        [object]
        [parameter(Mandatory = $false)]
        $Tags,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [ECRPublicRepository]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSECRPublicRepository'

function New-VSECRRegistryPolicy {
    <#
    .SYNOPSIS
        Adds an AWS::ECR::RegistryPolicy resource to the template.

    .DESCRIPTION
        Adds an AWS::ECR::RegistryPolicy resource to the template.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-registrypolicy.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER PolicyText
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-registrypolicy.html#cfn-ecr-registrypolicy-policytext
        UpdateType: Mutable
        PrimitiveType: Json

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([ECRRegistryPolicy])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $true)]
        [VSJson]
        $PolicyText,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [ECRRegistryPolicy]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSECRRegistryPolicy'

function New-VSECRReplicationConfiguration {
    <#
    .SYNOPSIS
        Adds an AWS::ECR::ReplicationConfiguration resource to the template.

    .DESCRIPTION
        Adds an AWS::ECR::ReplicationConfiguration resource to the template.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-replicationconfiguration.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER ReplicationConfiguration
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-replicationconfiguration.html#cfn-ecr-replicationconfiguration-replicationconfiguration
        UpdateType: Mutable
        Type: ReplicationConfiguration

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([ECRReplicationConfiguration])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $true)]
        $ReplicationConfiguration,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [ECRReplicationConfiguration]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSECRReplicationConfiguration'

function New-VSECRRepository {
    <#
    .SYNOPSIS
        Adds an AWS::ECR::Repository resource to the template. The AWS::ECR::Repository resource specifies an Amazon Elastic Container Registry (Amazon ECR repository, where users can push and pull Docker images. For more information, see Amazon ECR Repositories: https://docs.aws.amazon.com/AmazonECR/latest/userguide/Repositories.html in the *Amazon Elastic Container Registry User Guide*.

    .DESCRIPTION
        Adds an AWS::ECR::Repository resource to the template. The AWS::ECR::Repository resource specifies an Amazon Elastic Container Registry (Amazon ECR repository, where users can push and pull Docker images. For more information, see Amazon ECR Repositories: https://docs.aws.amazon.com/AmazonECR/latest/userguide/Repositories.html in the *Amazon Elastic Container Registry User Guide*.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-repository.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER LifecyclePolicy
        Creates or updates the lifecycle policy for the specified repository. For more information, see Lifecycle Policy Template: https://docs.aws.amazon.com/AmazonECR/latest/userguide/LifecyclePolicies.html.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-repository.html#cfn-ecr-repository-lifecyclepolicy
        UpdateType: Mutable
        Type: LifecyclePolicy

    .PARAMETER RepositoryName
        The name to use for the repository. The repository name may be specified on its own such as nginx-web-app or it can be prepended with a namespace to group the repository into a category such as project-a/nginx-web-app. If you don't specify a name, AWS CloudFormation generates a unique physical ID and uses that ID for the repository name. For more information, see Name Type: https://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-name.html.
If you specify a name, you cannot perform updates that require replacement of this resource. You can perform updates that require no or some interruption. If you must replace the resource, specify a new name.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-repository.html#cfn-ecr-repository-repositoryname
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER RepositoryPolicyText
        The JSON repository policy text to apply to the repository. For more information, see Amazon ECR Repository Policies: https://docs.aws.amazon.com/AmazonECR/latest/userguide/repository-policy-examples.html in the *Amazon Elastic Container Registry User Guide*.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-repository.html#cfn-ecr-repository-repositorypolicytext
        UpdateType: Mutable
        PrimitiveType: Json

    .PARAMETER Tags
        An array of key-value pairs to apply to this resource.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-repository.html#cfn-ecr-repository-tags
        UpdateType: Mutable
        Type: List
        ItemType: Tag
        DuplicatesAllowed: False

    .PARAMETER ImageTagMutability
        + PutLifecyclePolicy: https://docs.aws.amazon.com/AmazonECR/latest/APIReference/API_PutLifecyclePolicy.html in the *Amazon Elastic Container Registry API Reference*

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-repository.html#cfn-ecr-repository-imagetagmutability
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER ImageScanningConfiguration
        + PutLifecyclePolicy: https://docs.aws.amazon.com/AmazonECR/latest/APIReference/API_PutLifecyclePolicy.html in the *Amazon Elastic Container Registry API Reference*

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-ecr-repository.html#cfn-ecr-repository-imagescanningconfiguration
        UpdateType: Mutable
        PrimitiveType: Json

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([ECRRepository])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $false)]
        $LifecyclePolicy,
        [parameter(Mandatory = $false)]
        [object]
        $RepositoryName,
        [parameter(Mandatory = $false)]
        [VSJson]
        $RepositoryPolicyText,
        [TransformTag()]
        [object]
        [parameter(Mandatory = $false)]
        $Tags,
        [parameter(Mandatory = $false)]
        [object]
        $ImageTagMutability,
        [parameter(Mandatory = $false)]
        [VSJson]
        $ImageScanningConfiguration,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [ECRRepository]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSECRRepository'