VaporShell.Route53Resolver.psm1

# PSM1 Contents
function Format-Json {
    [CmdletBinding()]
    Param (
        [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)]
        [String]
        $Json
    )
    Begin {
        $cleaner = {
            param([String]$Line)
            Process{
                [Regex]::Replace(
                    $Line,
                    "\\u(?<Value>[a-zA-Z0-9]{4})",
                    {
                        param($m)([char]([int]::Parse(
                            $m.Groups['Value'].Value,
                            [System.Globalization.NumberStyles]::HexNumber
                        ))).ToString()
                    }
                )
            }
        }
    }
    Process {
        if ($PSVersionTable.PSVersion.Major -lt 6) {
            try {
                $indent = 0;
                $res = $Json -split '\n' | ForEach-Object {
                    if ($_ -match '[\}\]]') {
                        # This line contains ] or }, decrement the indentation level
                        $indent--
                    }
                    $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ')
                    if ($_ -match '[\{\[]') {
                        # This line contains [ or {, increment the indentation level
                        $indent++
                    }
                    $cleaner.Invoke($line)
                }
                $res -join "`n"
            }
            catch {
                ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n"
            }
        }
        else {
            ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n"
        }
    }
}

function Get-TrueCount {
    Param
    (
        [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)]
        $Array
    )
    Process {
        if ($array) {
            if ($array.Count) {
                $count = $array.Count
            }
            else {
                $count = 1
            }
        }
        else {
            $count = 0
        }
    }
    End {
        return $count
    }
}

function New-VSError {
    <#
    .SYNOPSIS
    Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError()
    
    .PARAMETER Result
    Allows input of an error from AWS SDK, resulting in the Exception message being parsed out.
    
    .PARAMETER String
    Used to create basic String message errors in the same wrapper
    #>

    [cmdletbinding(DefaultParameterSetName="Result")]
    param(
        [parameter(Position=0,ParameterSetName="Result")]
        $Result,
        [parameter(Position=0,ParameterSetName="String")]
        $String
    )
    switch ($PSCmdlet.ParameterSetName) {
        Result { $Exception = "$($result.Exception.InnerException.Message)" }
        String { $Exception = "$String" }
    }
    $e = New-Object "System.Exception" $Exception
    $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null
    return $errorRecord
}

function ResolveS3Endpoint {
    <#
    .SYNOPSIS
    Resolves the S3 endpoint most appropriate for each region.
    #>

    Param
    (
      [parameter(Mandatory=$true,Position=0)]
      [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")]
      [String]
      $Region
    )
    $endpointMap = @{
        "us-east-2" = "s3.us-east-2.amazonaws.com"
        "us-east-1" = "s3.amazonaws.com"
        "us-west-1" = "s3-us-west-1.amazonaws.com"
        "us-west-2" = "s3-us-west-2.amazonaws.com"
        "ca-central-1" = "s3.ca-central-1.amazonaws.com"
        "ap-south-1" = "s3.ap-south-1.amazonaws.com"
        "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com"
        "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com"
        "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com"
        "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com"
        "eu-central-1" = "s3.eu-central-1.amazonaws.com"
        "eu-west-1" = "s3-eu-west-1.amazonaws.com"
        "eu-west-2" = "s3.eu-west-2.amazonaws.com"
        "sa-east-1" = "s3-sa-east-1.amazonaws.com"
    }
    return $endpointMap[$Region]
}

function Add-VSRoute53ResolverFirewallRuleGroupFirewallRule {
    <#
    .SYNOPSIS
        Adds an AWS::Route53Resolver::FirewallRuleGroup.FirewallRule resource property to the template.

    .DESCRIPTION
        Adds an AWS::Route53Resolver::FirewallRuleGroup.FirewallRule resource property to the template.


    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-firewallrulegroup-firewallrule.html

    .PARAMETER FirewallDomainListId
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-firewallrulegroup-firewallrule.html#cfn-route53resolver-firewallrulegroup-firewallrule-firewalldomainlistid
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER Priority
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-firewallrulegroup-firewallrule.html#cfn-route53resolver-firewallrulegroup-firewallrule-priority
        UpdateType: Mutable
        PrimitiveType: Integer

    .PARAMETER Action
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-firewallrulegroup-firewallrule.html#cfn-route53resolver-firewallrulegroup-firewallrule-action
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER BlockResponse
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-firewallrulegroup-firewallrule.html#cfn-route53resolver-firewallrulegroup-firewallrule-blockresponse
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER BlockOverrideDomain
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-firewallrulegroup-firewallrule.html#cfn-route53resolver-firewallrulegroup-firewallrule-blockoverridedomain
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER BlockOverrideDnsType
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-firewallrulegroup-firewallrule.html#cfn-route53resolver-firewallrulegroup-firewallrule-blockoverridednstype
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER BlockOverrideTtl
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-firewallrulegroup-firewallrule.html#cfn-route53resolver-firewallrulegroup-firewallrule-blockoverridettl
        UpdateType: Mutable
        PrimitiveType: Integer

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([Route53ResolverFirewallRuleGroupFirewallRule])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true)]
        [object]
        $FirewallDomainListId,
        [parameter(Mandatory = $true)]
        [object]
        $Priority,
        [parameter(Mandatory = $true)]
        [object]
        $Action,
        [parameter(Mandatory = $false)]
        [object]
        $BlockResponse,
        [parameter(Mandatory = $false)]
        [object]
        $BlockOverrideDomain,
        [parameter(Mandatory = $false)]
        [object]
        $BlockOverrideDnsType,
        [parameter(Mandatory = $false)]
        [object]
        $BlockOverrideTtl
    )
    Process {
        $obj = [Route53ResolverFirewallRuleGroupFirewallRule]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'Add-VSRoute53ResolverFirewallRuleGroupFirewallRule'

function Add-VSRoute53ResolverResolverEndpointIpAddressRequest {
    <#
    .SYNOPSIS
        Adds an AWS::Route53Resolver::ResolverEndpoint.IpAddressRequest resource property to the template. In a CreateResolverEndpoint: https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_CreateResolverEndpoint.html request, the IP address that DNS queries originate from (for outbound endpoints or that you forward DNS queries to (for inbound endpoints. IpAddressRequest also includes the ID of the subnet that contains the IP address.

    .DESCRIPTION
        Adds an AWS::Route53Resolver::ResolverEndpoint.IpAddressRequest resource property to the template.
In a CreateResolverEndpoint: https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_CreateResolverEndpoint.html request, the IP address that DNS queries originate from (for outbound endpoints or that you forward DNS queries to (for inbound endpoints. IpAddressRequest also includes the ID of the subnet that contains the IP address.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-resolverendpoint-ipaddressrequest.html

    .PARAMETER Ip
        The IP address that you want to use for DNS queries.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-resolverendpoint-ipaddressrequest.html#cfn-route53resolver-resolverendpoint-ipaddressrequest-ip
        PrimitiveType: String
        UpdateType: Mutable

    .PARAMETER SubnetId
        The ID of the subnet that contains the IP address.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-resolverendpoint-ipaddressrequest.html#cfn-route53resolver-resolverendpoint-ipaddressrequest-subnetid
        PrimitiveType: String
        UpdateType: Mutable

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([Route53ResolverResolverEndpointIpAddressRequest])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $false)]
        [object]
        $Ip,
        [parameter(Mandatory = $true)]
        [object]
        $SubnetId
    )
    Process {
        $obj = [Route53ResolverResolverEndpointIpAddressRequest]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'Add-VSRoute53ResolverResolverEndpointIpAddressRequest'

function Add-VSRoute53ResolverResolverRuleTargetAddress {
    <#
    .SYNOPSIS
        Adds an AWS::Route53Resolver::ResolverRule.TargetAddress resource property to the template. In a CreateResolverRule: https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_CreateResolverRule.html request, an array of the IPs that you want to forward DNS queries to.

    .DESCRIPTION
        Adds an AWS::Route53Resolver::ResolverRule.TargetAddress resource property to the template.
In a CreateResolverRule: https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_CreateResolverRule.html request, an array of the IPs that you want to forward DNS queries to.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-resolverrule-targetaddress.html

    .PARAMETER Ip
        One IP address that you want to forward DNS queries to. You can specify only IPv4 addresses.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-resolverrule-targetaddress.html#cfn-route53resolver-resolverrule-targetaddress-ip
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER Port
        The port at Ip that you want to forward DNS queries to.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-route53resolver-resolverrule-targetaddress.html#cfn-route53resolver-resolverrule-targetaddress-port
        UpdateType: Mutable
        PrimitiveType: String

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([Route53ResolverResolverRuleTargetAddress])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true)]
        [object]
        $Ip,
        [parameter(Mandatory = $false)]
        [object]
        $Port
    )
    Process {
        $obj = [Route53ResolverResolverRuleTargetAddress]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'Add-VSRoute53ResolverResolverRuleTargetAddress'

function New-VSRoute53ResolverFirewallDomainList {
    <#
    .SYNOPSIS
        Adds an AWS::Route53Resolver::FirewallDomainList resource to the template.

    .DESCRIPTION
        Adds an AWS::Route53Resolver::FirewallDomainList resource to the template.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewalldomainlist.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER Name
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewalldomainlist.html#cfn-route53resolver-firewalldomainlist-name
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER Domains
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewalldomainlist.html#cfn-route53resolver-firewalldomainlist-domains
        UpdateType: Mutable
        Type: List
        PrimitiveItemType: String
        DuplicatesAllowed: False

    .PARAMETER DomainFileUrl
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewalldomainlist.html#cfn-route53resolver-firewalldomainlist-domainfileurl
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER Tags
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewalldomainlist.html#cfn-route53resolver-firewalldomainlist-tags
        UpdateType: Mutable
        Type: List
        ItemType: Tag
        DuplicatesAllowed: False

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([Route53ResolverFirewallDomainList])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $false)]
        [object]
        $Name,
        [parameter(Mandatory = $false)]
        $Domains,
        [parameter(Mandatory = $false)]
        [object]
        $DomainFileUrl,
        [TransformTag()]
        [object]
        [parameter(Mandatory = $false)]
        $Tags,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [Route53ResolverFirewallDomainList]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSRoute53ResolverFirewallDomainList'

function New-VSRoute53ResolverFirewallRuleGroup {
    <#
    .SYNOPSIS
        Adds an AWS::Route53Resolver::FirewallRuleGroup resource to the template.

    .DESCRIPTION
        Adds an AWS::Route53Resolver::FirewallRuleGroup resource to the template.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewallrulegroup.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER Name
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewallrulegroup.html#cfn-route53resolver-firewallrulegroup-name
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER FirewallRules
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewallrulegroup.html#cfn-route53resolver-firewallrulegroup-firewallrules
        UpdateType: Mutable
        Type: List
        ItemType: FirewallRule
        DuplicatesAllowed: False

    .PARAMETER Tags
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewallrulegroup.html#cfn-route53resolver-firewallrulegroup-tags
        UpdateType: Mutable
        Type: List
        ItemType: Tag
        DuplicatesAllowed: False

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([Route53ResolverFirewallRuleGroup])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $false)]
        [object]
        $Name,
        [parameter(Mandatory = $false)]
        [object]
        $FirewallRules,
        [TransformTag()]
        [object]
        [parameter(Mandatory = $false)]
        $Tags,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [Route53ResolverFirewallRuleGroup]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSRoute53ResolverFirewallRuleGroup'

function New-VSRoute53ResolverFirewallRuleGroupAssociation {
    <#
    .SYNOPSIS
        Adds an AWS::Route53Resolver::FirewallRuleGroupAssociation resource to the template.

    .DESCRIPTION
        Adds an AWS::Route53Resolver::FirewallRuleGroupAssociation resource to the template.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewallrulegroupassociation.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER FirewallRuleGroupId
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewallrulegroupassociation.html#cfn-route53resolver-firewallrulegroupassociation-firewallrulegroupid
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER VpcId
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewallrulegroupassociation.html#cfn-route53resolver-firewallrulegroupassociation-vpcid
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER Name
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewallrulegroupassociation.html#cfn-route53resolver-firewallrulegroupassociation-name
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER Priority
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewallrulegroupassociation.html#cfn-route53resolver-firewallrulegroupassociation-priority
        UpdateType: Mutable
        PrimitiveType: Integer

    .PARAMETER MutationProtection
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewallrulegroupassociation.html#cfn-route53resolver-firewallrulegroupassociation-mutationprotection
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER Tags
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-firewallrulegroupassociation.html#cfn-route53resolver-firewallrulegroupassociation-tags
        UpdateType: Mutable
        Type: List
        ItemType: Tag
        DuplicatesAllowed: False

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([Route53ResolverFirewallRuleGroupAssociation])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $true)]
        [object]
        $FirewallRuleGroupId,
        [parameter(Mandatory = $true)]
        [object]
        $VpcId,
        [parameter(Mandatory = $false)]
        [object]
        $Name,
        [parameter(Mandatory = $true)]
        [object]
        $Priority,
        [parameter(Mandatory = $false)]
        [object]
        $MutationProtection,
        [TransformTag()]
        [object]
        [parameter(Mandatory = $false)]
        $Tags,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [Route53ResolverFirewallRuleGroupAssociation]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSRoute53ResolverFirewallRuleGroupAssociation'

function New-VSRoute53ResolverResolverConfig {
    <#
    .SYNOPSIS
        Adds an AWS::Route53Resolver::ResolverConfig resource to the template.

    .DESCRIPTION
        Adds an AWS::Route53Resolver::ResolverConfig resource to the template.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverconfig.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER ResourceId
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverconfig.html#cfn-route53resolver-resolverconfig-resourceid
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER AutodefinedReverseFlag
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverconfig.html#cfn-route53resolver-resolverconfig-autodefinedreverseflag
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([Route53ResolverResolverConfig])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $true)]
        [object]
        $ResourceId,
        [parameter(Mandatory = $true)]
        [object]
        $AutodefinedReverseFlag,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [Route53ResolverResolverConfig]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSRoute53ResolverResolverConfig'

function New-VSRoute53ResolverResolverDNSSECConfig {
    <#
    .SYNOPSIS
        Adds an AWS::Route53Resolver::ResolverDNSSECConfig resource to the template.

    .DESCRIPTION
        Adds an AWS::Route53Resolver::ResolverDNSSECConfig resource to the template.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverdnssecconfig.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER ResourceId
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverdnssecconfig.html#cfn-route53resolver-resolverdnssecconfig-resourceid
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([Route53ResolverResolverDNSSECConfig])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $false)]
        [object]
        $ResourceId,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [Route53ResolverResolverDNSSECConfig]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSRoute53ResolverResolverDNSSECConfig'

function New-VSRoute53ResolverResolverEndpoint {
    <#
    .SYNOPSIS
        Adds an AWS::Route53Resolver::ResolverEndpoint resource to the template. Creates a Resolver endpoint. There are two types of Resolver endpoints, inbound and outbound:

    .DESCRIPTION
        Adds an AWS::Route53Resolver::ResolverEndpoint resource to the template. Creates a Resolver endpoint. There are two types of Resolver endpoints, inbound and outbound:

+ An *inbound Resolver endpoint* forwards DNS queries to the DNS service for a VPC from your network.

+ An *outbound Resolver endpoint* forwards DNS queries from the DNS service for a VPC to your network.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverendpoint.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER IpAddresses
        The subnets and IP addresses in your VPC that DNS queries originate from for outbound endpoints or that you forward DNS queries to for inbound endpoints. The subnet ID uniquely identifies a VPC.

        Type: List
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverendpoint.html#cfn-route53resolver-resolverendpoint-ipaddresses
        ItemType: IpAddressRequest
        UpdateType: Mutable

    .PARAMETER Direction
        Indicates whether the Resolver endpoint allows inbound or outbound DNS queries:
+ INBOUND: allows DNS queries to your VPC from your network
+ OUTBOUND: allows DNS queries from your VPC to your network

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverendpoint.html#cfn-route53resolver-resolverendpoint-direction
        PrimitiveType: String
        UpdateType: Immutable

    .PARAMETER SecurityGroupIds
        The ID of one or more security groups that control access to this VPC. The security group must include one or more inbound rules for inbound endpoints or outbound rules for outbound endpoints. Inbound and outbound rules must allow TCP and UDP access. For inbound access, open port 53. For outbound access, open the port that you're using for DNS queries on your network.

        PrimitiveItemType: String
        Type: List
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverendpoint.html#cfn-route53resolver-resolverendpoint-securitygroupids
        UpdateType: Immutable

    .PARAMETER Tags
        A list of the tag keys and values that you want to associate with the endpoint.

        Type: List
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverendpoint.html#cfn-route53resolver-resolverendpoint-tags
        ItemType: Tag
        UpdateType: Mutable

    .PARAMETER Name
        A friendly name that lets you easily find a configuration in the Resolver dashboard in the Route 53 console.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverendpoint.html#cfn-route53resolver-resolverendpoint-name
        PrimitiveType: String
        UpdateType: Mutable

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([Route53ResolverResolverEndpoint])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $true)]
        [object]
        $IpAddresses,
        [parameter(Mandatory = $true)]
        [object]
        $Direction,
        [parameter(Mandatory = $true)]
        $SecurityGroupIds,
        [TransformTag()]
        [object]
        [parameter(Mandatory = $false)]
        $Tags,
        [parameter(Mandatory = $false)]
        [object]
        $Name,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [Route53ResolverResolverEndpoint]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSRoute53ResolverResolverEndpoint'

function New-VSRoute53ResolverResolverQueryLoggingConfig {
    <#
    .SYNOPSIS
        Adds an AWS::Route53Resolver::ResolverQueryLoggingConfig resource to the template.

    .DESCRIPTION
        Adds an AWS::Route53Resolver::ResolverQueryLoggingConfig resource to the template.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverqueryloggingconfig.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER Name
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverqueryloggingconfig.html#cfn-route53resolver-resolverqueryloggingconfig-name
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER DestinationArn
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverqueryloggingconfig.html#cfn-route53resolver-resolverqueryloggingconfig-destinationarn
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([Route53ResolverResolverQueryLoggingConfig])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $false)]
        [object]
        $Name,
        [parameter(Mandatory = $false)]
        [object]
        $DestinationArn,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [Route53ResolverResolverQueryLoggingConfig]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSRoute53ResolverResolverQueryLoggingConfig'

function New-VSRoute53ResolverResolverQueryLoggingConfigAssociation {
    <#
    .SYNOPSIS
        Adds an AWS::Route53Resolver::ResolverQueryLoggingConfigAssociation resource to the template.

    .DESCRIPTION
        Adds an AWS::Route53Resolver::ResolverQueryLoggingConfigAssociation resource to the template.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverqueryloggingconfigassociation.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER ResolverQueryLogConfigId
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverqueryloggingconfigassociation.html#cfn-route53resolver-resolverqueryloggingconfigassociation-resolverquerylogconfigid
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER ResourceId
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverqueryloggingconfigassociation.html#cfn-route53resolver-resolverqueryloggingconfigassociation-resourceid
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([Route53ResolverResolverQueryLoggingConfigAssociation])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $false)]
        [object]
        $ResolverQueryLogConfigId,
        [parameter(Mandatory = $false)]
        [object]
        $ResourceId,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [Route53ResolverResolverQueryLoggingConfigAssociation]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSRoute53ResolverResolverQueryLoggingConfigAssociation'

function New-VSRoute53ResolverResolverRule {
    <#
    .SYNOPSIS
        Adds an AWS::Route53Resolver::ResolverRule resource to the template. For DNS queries that originate in your VPCs, specifies which Resolver endpoint the queries pass through, one domain name that you want to forward to your network, and the IP addresses of the DNS resolvers in your network.

    .DESCRIPTION
        Adds an AWS::Route53Resolver::ResolverRule resource to the template. For DNS queries that originate in your VPCs, specifies which Resolver endpoint the queries pass through, one domain name that you want to forward to your network, and the IP addresses of the DNS resolvers in your network.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverrule.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER ResolverEndpointId
        The ID of the endpoint that the rule is associated with.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverrule.html#cfn-route53resolver-resolverrule-resolverendpointid
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER DomainName
        DNS queries for this domain name are forwarded to the IP addresses that are specified in TargetIps. If a query matches multiple Resolver rules example.com and www.example.com, the query is routed using the Resolver rule that contains the most specific domain name www.example.com.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverrule.html#cfn-route53resolver-resolverrule-domainname
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER Name
        The name for the Resolver rule, which you specified when you created the Resolver rule.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverrule.html#cfn-route53resolver-resolverrule-name
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER RuleType
        When you want to forward DNS queries for specified domain name to resolvers on your network, specify FORWARD.
When you have a forwarding rule to forward DNS queries for a domain to your network and you want Resolver to process queries for a subdomain of that domain, specify SYSTEM.
For example, to forward DNS queries for example.com to resolvers on your network, you create a rule and specify FORWARD for RuleType. To then have Resolver process queries for apex.example.com, you create a rule and specify SYSTEM for RuleType.
Currently, only Resolver can create rules that have a value of RECURSIVE for RuleType.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverrule.html#cfn-route53resolver-resolverrule-ruletype
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER Tags
        A list of the tag keys and values that you want to associate with the endpoint.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverrule.html#cfn-route53resolver-resolverrule-tags
        UpdateType: Mutable
        Type: List
        ItemType: Tag
        DuplicatesAllowed: True

    .PARAMETER TargetIps
        An array that contains the IP addresses and ports that an outbound endpoint forwards DNS queries to. Typically, these are the IP addresses of DNS resolvers on your network. Specify IPv4 addresses. IPv6 is not supported.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverrule.html#cfn-route53resolver-resolverrule-targetips
        UpdateType: Mutable
        Type: List
        ItemType: TargetAddress
        DuplicatesAllowed: True

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([Route53ResolverResolverRule])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $false)]
        [object]
        $ResolverEndpointId,
        [parameter(Mandatory = $true)]
        [object]
        $DomainName,
        [parameter(Mandatory = $false)]
        [object]
        $Name,
        [parameter(Mandatory = $true)]
        [object]
        $RuleType,
        [TransformTag()]
        [object]
        [parameter(Mandatory = $false)]
        $Tags,
        [parameter(Mandatory = $false)]
        [object]
        $TargetIps,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [Route53ResolverResolverRule]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSRoute53ResolverResolverRule'

function New-VSRoute53ResolverResolverRuleAssociation {
    <#
    .SYNOPSIS
        Adds an AWS::Route53Resolver::ResolverRuleAssociation resource to the template. In the response to an AssociateResolverRule: https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_AssociateResolverRule.html, DisassociateResolverRule: https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_DisassociateResolverRule.html, or ListResolverRuleAssociations: https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_ListResolverRuleAssociations.html request, provides information about an association between a resolver rule and a VPC. The association determines which DNS queries that originate in the VPC are forwarded to your network.

    .DESCRIPTION
        Adds an AWS::Route53Resolver::ResolverRuleAssociation resource to the template. In the response to an AssociateResolverRule: https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_AssociateResolverRule.html, DisassociateResolverRule: https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_DisassociateResolverRule.html, or ListResolverRuleAssociations: https://docs.aws.amazon.com/Route53/latest/APIReference/API_route53resolver_ListResolverRuleAssociations.html request, provides information about an association between a resolver rule and a VPC. The association determines which DNS queries that originate in the VPC are forwarded to your network.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverruleassociation.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER VPCId
        The ID of the VPC that you associated the Resolver rule with.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverruleassociation.html#cfn-route53resolver-resolverruleassociation-vpcid
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER ResolverRuleId
        The ID of the Resolver rule that you associated with the VPC that is specified by VPCId.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverruleassociation.html#cfn-route53resolver-resolverruleassociation-resolverruleid
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER Name
        The name of an association between a Resolver rule and a VPC.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-route53resolver-resolverruleassociation.html#cfn-route53resolver-resolverruleassociation-name
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([Route53ResolverResolverRuleAssociation])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $true)]
        [object]
        $VPCId,
        [parameter(Mandatory = $true)]
        [object]
        $ResolverRuleId,
        [parameter(Mandatory = $false)]
        [object]
        $Name,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [Route53ResolverResolverRuleAssociation]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSRoute53ResolverResolverRuleAssociation'