VaporShell.WorkSpaces.psm1

# PSM1 Contents
function Format-Json {
    [CmdletBinding()]
    Param (
        [Parameter(Mandatory = $true, Position = 0, ValueFromPipeline = $true)]
        [String]
        $Json
    )
    Begin {
        $cleaner = {
            param([String]$Line)
            Process{
                [Regex]::Replace(
                    $Line,
                    "\\u(?<Value>[a-zA-Z0-9]{4})",
                    {
                        param($m)([char]([int]::Parse(
                            $m.Groups['Value'].Value,
                            [System.Globalization.NumberStyles]::HexNumber
                        ))).ToString()
                    }
                )
            }
        }
    }
    Process {
        if ($PSVersionTable.PSVersion.Major -lt 6) {
            try {
                $indent = 0;
                $res = $Json -split '\n' | ForEach-Object {
                    if ($_ -match '[\}\]]') {
                        # This line contains ] or }, decrement the indentation level
                        $indent--
                    }
                    $line = (' ' * $indent * 2) + $_.TrimStart().Replace(': ', ': ')
                    if ($_ -match '[\{\[]') {
                        # This line contains [ or {, increment the indentation level
                        $indent++
                    }
                    $cleaner.Invoke($line)
                }
                $res -join "`n"
            }
            catch {
                ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n"
            }
        }
        else {
            ($Json -split '\n' | ForEach-Object {$cleaner.Invoke($_)}) -join "`n"
        }
    }
}

function Get-TrueCount {
    Param
    (
        [parameter(Mandatory = $false,Position = 0,ValueFromPipeline = $true)]
        $Array
    )
    Process {
        if ($array) {
            if ($array.Count) {
                $count = $array.Count
            }
            else {
                $count = 1
            }
        }
        else {
            $count = 0
        }
    }
    End {
        return $count
    }
}

function New-VSError {
    <#
    .SYNOPSIS
    Error generator function to use in tandem with $PSCmdlet.ThrowTerminatingError()
    
    .PARAMETER Result
    Allows input of an error from AWS SDK, resulting in the Exception message being parsed out.
    
    .PARAMETER String
    Used to create basic String message errors in the same wrapper
    #>

    [cmdletbinding(DefaultParameterSetName="Result")]
    param(
        [parameter(Position=0,ParameterSetName="Result")]
        $Result,
        [parameter(Position=0,ParameterSetName="String")]
        $String
    )
    switch ($PSCmdlet.ParameterSetName) {
        Result { $Exception = "$($result.Exception.InnerException.Message)" }
        String { $Exception = "$String" }
    }
    $e = New-Object "System.Exception" $Exception
    $errorRecord = New-Object 'System.Management.Automation.ErrorRecord' $e, $null, ([System.Management.Automation.ErrorCategory]::InvalidOperation), $null
    return $errorRecord
}

function ResolveS3Endpoint {
    <#
    .SYNOPSIS
    Resolves the S3 endpoint most appropriate for each region.
    #>

    Param
    (
      [parameter(Mandatory=$true,Position=0)]
      [ValidateSet("eu-west-2","ap-south-1","us-east-2","sa-east-1","us-west-1","us-west-2","eu-west-1","ap-southeast-2","ca-central-1","ap-northeast-2","us-east-1","eu-central-1","ap-southeast-1","ap-northeast-1")]
      [String]
      $Region
    )
    $endpointMap = @{
        "us-east-2" = "s3.us-east-2.amazonaws.com"
        "us-east-1" = "s3.amazonaws.com"
        "us-west-1" = "s3-us-west-1.amazonaws.com"
        "us-west-2" = "s3-us-west-2.amazonaws.com"
        "ca-central-1" = "s3.ca-central-1.amazonaws.com"
        "ap-south-1" = "s3.ap-south-1.amazonaws.com"
        "ap-northeast-2" = "s3.ap-northeast-2.amazonaws.com"
        "ap-southeast-1" = "s3-ap-southeast-1.amazonaws.com"
        "ap-southeast-2" = "s3-ap-southeast-2.amazonaws.com"
        "ap-northeast-1" = "s3-ap-northeast-1.amazonaws.com"
        "eu-central-1" = "s3.eu-central-1.amazonaws.com"
        "eu-west-1" = "s3-eu-west-1.amazonaws.com"
        "eu-west-2" = "s3.eu-west-2.amazonaws.com"
        "sa-east-1" = "s3-sa-east-1.amazonaws.com"
    }
    return $endpointMap[$Region]
}

function Add-VSWorkSpacesConnectionAliasConnectionAliasAssociation {
    <#
    .SYNOPSIS
        Adds an AWS::WorkSpaces::ConnectionAlias.ConnectionAliasAssociation resource property to the template.

    .DESCRIPTION
        Adds an AWS::WorkSpaces::ConnectionAlias.ConnectionAliasAssociation resource property to the template.


    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-workspaces-connectionalias-connectionaliasassociation.html

    .PARAMETER AssociationStatus
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-workspaces-connectionalias-connectionaliasassociation.html#cfn-workspaces-connectionalias-connectionaliasassociation-associationstatus
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER AssociatedAccountId
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-workspaces-connectionalias-connectionaliasassociation.html#cfn-workspaces-connectionalias-connectionaliasassociation-associatedaccountid
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER ResourceId
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-workspaces-connectionalias-connectionaliasassociation.html#cfn-workspaces-connectionalias-connectionaliasassociation-resourceid
        UpdateType: Mutable
        PrimitiveType: String

    .PARAMETER ConnectionIdentifier
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-workspaces-connectionalias-connectionaliasassociation.html#cfn-workspaces-connectionalias-connectionaliasassociation-connectionidentifier
        UpdateType: Mutable
        PrimitiveType: String

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([WorkSpacesConnectionAliasConnectionAliasAssociation])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $false)]
        [object]
        $AssociationStatus,
        [parameter(Mandatory = $false)]
        [object]
        $AssociatedAccountId,
        [parameter(Mandatory = $false)]
        [object]
        $ResourceId,
        [parameter(Mandatory = $false)]
        [object]
        $ConnectionIdentifier
    )
    Process {
        $obj = [WorkSpacesConnectionAliasConnectionAliasAssociation]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'Add-VSWorkSpacesConnectionAliasConnectionAliasAssociation'

function Add-VSWorkSpacesWorkspaceWorkspaceProperties {
    <#
    .SYNOPSIS
        Adds an AWS::WorkSpaces::Workspace.WorkspaceProperties resource property to the template. Information about a WorkSpace.

    .DESCRIPTION
        Adds an AWS::WorkSpaces::Workspace.WorkspaceProperties resource property to the template.
Information about a WorkSpace.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-workspaces-workspace-workspaceproperties.html

    .PARAMETER ComputeTypeName
        The compute type. For more information, see Amazon WorkSpaces Bundles: http://aws.amazon.com/workspaces/details/#Amazon_WorkSpaces_Bundles.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-workspaces-workspace-workspaceproperties.html#cfn-workspaces-workspace-workspaceproperties-computetypename
        PrimitiveType: String
        UpdateType: Mutable

    .PARAMETER RootVolumeSizeGib
        The size of the root volume. For important information about how to modify the size of the root and user volumes, see Modify a WorkSpace: https://docs.aws.amazon.com/workspaces/latest/adminguide/modify-workspaces.html.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-workspaces-workspace-workspaceproperties.html#cfn-workspaces-workspace-workspaceproperties-rootvolumesizegib
        PrimitiveType: Integer
        UpdateType: Mutable

    .PARAMETER RunningMode
        The running mode. For more information, see Manage the WorkSpace Running Mode: https://docs.aws.amazon.com/workspaces/latest/adminguide/running-mode.html.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-workspaces-workspace-workspaceproperties.html#cfn-workspaces-workspace-workspaceproperties-runningmode
        PrimitiveType: String
        UpdateType: Mutable

    .PARAMETER RunningModeAutoStopTimeoutInMinutes
        The time after a user logs off when WorkSpaces are automatically stopped. Configured in 60-minute intervals.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-workspaces-workspace-workspaceproperties.html#cfn-workspaces-workspace-workspaceproperties-runningmodeautostoptimeoutinminutes
        PrimitiveType: Integer
        UpdateType: Mutable

    .PARAMETER UserVolumeSizeGib
        The size of the user storage. For important information about how to modify the size of the root and user volumes, see Modify a WorkSpace: https://docs.aws.amazon.com/workspaces/latest/adminguide/modify-workspaces.html.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-properties-workspaces-workspace-workspaceproperties.html#cfn-workspaces-workspace-workspaceproperties-uservolumesizegib
        PrimitiveType: Integer
        UpdateType: Mutable

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([WorkSpacesWorkspaceWorkspaceProperties])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $false)]
        [object]
        $ComputeTypeName,
        [parameter(Mandatory = $false)]
        [object]
        $RootVolumeSizeGib,
        [parameter(Mandatory = $false)]
        [object]
        $RunningMode,
        [parameter(Mandatory = $false)]
        [object]
        $RunningModeAutoStopTimeoutInMinutes,
        [parameter(Mandatory = $false)]
        [object]
        $UserVolumeSizeGib
    )
    Process {
        $obj = [WorkSpacesWorkspaceWorkspaceProperties]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'Add-VSWorkSpacesWorkspaceWorkspaceProperties'

function New-VSWorkSpacesConnectionAlias {
    <#
    .SYNOPSIS
        Adds an AWS::WorkSpaces::ConnectionAlias resource to the template.

    .DESCRIPTION
        Adds an AWS::WorkSpaces::ConnectionAlias resource to the template.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-workspaces-connectionalias.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER ConnectionString
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-workspaces-connectionalias.html#cfn-workspaces-connectionalias-connectionstring
        UpdateType: Immutable
        PrimitiveType: String

    .PARAMETER Tags
        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-workspaces-connectionalias.html#cfn-workspaces-connectionalias-tags
        UpdateType: Immutable
        Type: List
        ItemType: Tag
        DuplicatesAllowed: True

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([WorkSpacesConnectionAlias])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $true)]
        [object]
        $ConnectionString,
        [TransformTag()]
        [object]
        [parameter(Mandatory = $false)]
        $Tags,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [WorkSpacesConnectionAlias]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSWorkSpacesConnectionAlias'

function New-VSWorkSpacesWorkspace {
    <#
    .SYNOPSIS
        Adds an AWS::WorkSpaces::Workspace resource to the template. Specifies a WorkSpace.

    .DESCRIPTION
        Adds an AWS::WorkSpaces::Workspace resource to the template. Specifies a WorkSpace.

Updates are not supported for the BundleId, RootVolumeEncryptionEnabled, UserVolumeEncryptionEnabled, or VolumeEncryptionKey properties. To update these properties, you must also update a property that triggers a replacement, such as the UserName property.

    .LINK
        http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-workspaces-workspace.html

    .PARAMETER LogicalId
        The logical ID must be alphanumeric (A-Za-z0-9) and unique within the template. Use the logical name to reference the resource in other parts of the template. For example, if you want to map an Amazon Elastic Block Store volume to an Amazon EC2 instance, you reference the logical IDs to associate the block stores with the instance.

    .PARAMETER BundleId
        The identifier of the bundle for the WorkSpace.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-workspaces-workspace.html#cfn-workspaces-workspace-bundleid
        PrimitiveType: String
        UpdateType: Conditional

    .PARAMETER DirectoryId
        The identifier of the AWS Directory Service directory for the WorkSpace.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-workspaces-workspace.html#cfn-workspaces-workspace-directoryid
        PrimitiveType: String
        UpdateType: Conditional

    .PARAMETER RootVolumeEncryptionEnabled
        Indicates whether the data stored on the root volume is encrypted.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-workspaces-workspace.html#cfn-workspaces-workspace-rootvolumeencryptionenabled
        PrimitiveType: Boolean
        UpdateType: Conditional

    .PARAMETER Tags
        The tags for the WorkSpace.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-workspaces-workspace.html#cfn-workspaces-workspace-tags
        DuplicatesAllowed: True
        ItemType: Tag
        Type: List
        UpdateType: Mutable

    .PARAMETER UserName
        The user name of the user for the WorkSpace. This user name must exist in the AWS Directory Service directory for the WorkSpace.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-workspaces-workspace.html#cfn-workspaces-workspace-username
        PrimitiveType: String
        UpdateType: Immutable

    .PARAMETER UserVolumeEncryptionEnabled
        Indicates whether the data stored on the user volume is encrypted.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-workspaces-workspace.html#cfn-workspaces-workspace-uservolumeencryptionenabled
        PrimitiveType: Boolean
        UpdateType: Conditional

    .PARAMETER VolumeEncryptionKey
        The symmetric AWS KMS customer master key CMK used to encrypt data stored on your WorkSpace. Amazon WorkSpaces does not support asymmetric CMKs.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-workspaces-workspace.html#cfn-workspaces-workspace-volumeencryptionkey
        PrimitiveType: String
        UpdateType: Conditional

    .PARAMETER WorkspaceProperties
        The WorkSpace properties.

        Documentation: http://docs.aws.amazon.com/AWSCloudFormation/latest/UserGuide/aws-resource-workspaces-workspace.html#cfn-workspaces-workspace-workspaceproperties
        Type: WorkspaceProperties
        UpdateType: Mutable

    .PARAMETER DeletionPolicy
        With the DeletionPolicy attribute you can preserve or (in some cases) backup a resource when its stack is deleted. You specify a DeletionPolicy attribute for each resource that you want to control. If a resource has no DeletionPolicy attribute, AWS CloudFormation deletes the resource by default.

        To keep a resource when its stack is deleted, specify Retain for that resource. You can use retain for any resource. For example, you can retain a nested stack, S3 bucket, or EC2 instance so that you can continue to use or modify those resources after you delete their stacks.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER UpdateReplacePolicy
        Use the UpdateReplacePolicy attribute to retain or (in some cases) backup the existing physical instance of a resource when it is replaced during a stack update operation.

        When you initiate a stack update, AWS CloudFormation updates resources based on differences between what you submit and the stack's current template and parameters. If you update a resource property that requires that the resource be replaced, AWS CloudFormation recreates the resource during the update. Recreating the resource generates a new physical ID. AWS CloudFormation creates the replacement resource first, and then changes references from other dependent resources to point to the replacement resource. By default, AWS CloudFormation then deletes the old resource. Using the UpdateReplacePolicy, you can specify that AWS CloudFormation retain or (in some cases) create a snapshot of the old resource.

        For resources that support snapshots, such as AWS::EC2::Volume, specify Snapshot to have AWS CloudFormation create a snapshot before deleting the old resource instance.

        You can apply the UpdateReplacePolicy attribute to any resource. UpdateReplacePolicy is only executed if you update a resource property whose update behavior is specified as Replacement, thereby causing AWS CloudFormation to replace the old resource with a new one with a new physical ID. For example, if you update the Engine property of an AWS::RDS::DBInstance resource type, AWS CloudFormation creates a new resource and replaces the current DB instance resource with the new one. The UpdateReplacePolicy attribute would then dictate whether AWS CloudFormation deleted, retained, or created a snapshot of the old DB instance. The update behavior for each property of a resource is specified in the reference topic for that resource in the AWS Resource and Property Types Reference. For more information on resource update behavior, see Update Behaviors of Stack Resources.

        The UpdateReplacePolicy attribute applies to stack updates you perform directly, as well as stack updates performed using change sets.

        Note
        Resources that are retained continue to exist and continue to incur applicable charges until you delete those resources. Snapshots that are created with this policy continue to exist and continue to incur applicable charges until you delete those snapshots. UpdateReplacePolicy retains the old physical resource or snapshot, but removes it from AWS CloudFormation's scope.

        UpdateReplacePolicy differs from the DeletionPolicy attribute in that it only applies to resources replaced during stack updates. Use DeletionPolicy for resources deleted when a stack is deleted, or when the resource definition itself is deleted from the template as part of a stack update.

        You must use one of the following options: "Delete","Retain","Snapshot"

    .PARAMETER DependsOn
        With the DependsOn attribute you can specify that the creation of a specific resource follows another. When you add a DependsOn attribute to a resource, that resource is created only after the creation of the resource specified in the DependsOn attribute.

        This parameter takes a string or list of strings representing Logical IDs of resources that must be created prior to this resource being created.


    .PARAMETER Metadata
        The Metadata attribute enables you to associate structured data with a resource. By adding a Metadata attribute to a resource, you can add data in JSON or YAML to the resource declaration. In addition, you can use intrinsic functions (such as GetAtt and Ref), parameters, and pseudo parameters within the Metadata attribute to add those interpreted values.

        This will be returned when describing the resource using AWS CLI.


    .PARAMETER UpdatePolicy
        Use the UpdatePolicy attribute to specify how AWS CloudFormation handles updates to the AWS::AutoScaling::AutoScalingGroup resource. AWS CloudFormation invokes one of three update policies depending on the type of change you make or whether a scheduled action is associated with the Auto Scaling group.

        You must use the "Add-UpdatePolicy" function or the [UpdatePolicy] class here.
    .PARAMETER Condition
        Logical ID of the condition that this resource needs to be true in order for this resource to be provisioned.

    .FUNCTIONALITY
        Vaporshell
    #>

    [OutputType([WorkSpacesWorkspace])]
    [cmdletbinding()]
    Param(
        [parameter(Mandatory = $true,Position = 0)]
        [ValidateLogicalId()]
        [string]
        $LogicalId,
        [parameter(Mandatory = $true)]
        [object]
        $BundleId,
        [parameter(Mandatory = $true)]
        [object]
        $DirectoryId,
        [parameter(Mandatory = $false)]
        [object]
        $RootVolumeEncryptionEnabled,
        [TransformTag()]
        [object]
        [parameter(Mandatory = $false)]
        $Tags,
        [parameter(Mandatory = $true)]
        [object]
        $UserName,
        [parameter(Mandatory = $false)]
        [object]
        $UserVolumeEncryptionEnabled,
        [parameter(Mandatory = $false)]
        [object]
        $VolumeEncryptionKey,
        [parameter(Mandatory = $false)]
        $WorkspaceProperties,
        [parameter()]
        [DeletionPolicy]
        $DeletionPolicy,
        [parameter()]
        [UpdateReplacePolicy]
        $UpdateReplacePolicy,
        [parameter(Mandatory = $false)]
        [string[]]
        $DependsOn,
        [parameter(Mandatory = $false)]
        [VSJson]
        $Metadata,
        [parameter(Mandatory = $false)]
        [UpdatePolicy]
        $UpdatePolicy,
        [parameter(Mandatory = $false)]
        [string]
        $Condition
    )
    Process {
        $obj = [WorkSpacesWorkspace]::new($PSBoundParameters)
        Write-Debug "$($MyInvocation.MyCommand) PSBoundParameters:`n$($PSBoundParameters | ConvertTo-Json -Depth 20 | Format-Json)"
        Write-Verbose "Resulting object from $($MyInvocation.MyCommand): `n$($obj.ToJson() | Format-Json)"
        $obj
    }
}

Export-ModuleMember -Function 'New-VSWorkSpacesWorkspace'