functions/Invoke-DbaLogShipping.ps1

function Invoke-DbaLogShipping {
    <#
        .SYNOPSIS
            Invoke-DbaLogShipping sets up log shipping for one or more databases
 
        .DESCRIPTION
            Invoke-DbaLogShipping helps to easily set up log shipping for one or more databases.
 
            This function will make a lot of decisions for you assuming you want default values like a daily interval for the schedules with a 15 minute interval on the day.
            There are some settings that cannot be made by the function and they need to be prepared before the function is executed.
 
            The following settings need to be made before log shipping can be initiated:
            - Backup destination (the folder and the privileges)
            - Copy destination (the folder and the privileges)
 
            * Privileges
            Make sure your agent service on both the primary and the secondary instance is an Active Directory account.
            Also have the credentials ready to set the folder permissions
 
            ** Network share
            The backup destination needs to be shared and have the share privileges of FULL CONTROL to Everyone.
 
            ** NTFS permissions
            The backup destination must have at least read/write permissions for the primary instance agent account.
            The backup destination must have at least read permissions for the secondary instance agent account.
            The copy destination must have at least read/write permission for the secondary instance agent acount.
 
        .PARAMETER SourceSqlInstance
            Source SQL Server instance which contains the databases to be log shipped.
            You must have sysadmin access and server version must be SQL Server version 2000 or greater.
 
        .PARAMETER DestinationSqlInstance
            Destination SQL Server instance which contains the databases to be log shipped.
            You must have sysadmin access and server version must be SQL Server version 2000 or greater.
 
        .PARAMETER SourceSqlCredential
            Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)
 
        .PARAMETER SourceCredential
            Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)
 
        .PARAMETER DestinationSqlCredential
            Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)
 
        .PARAMETER DestinationCredential
            Login to the target instance using alternative credentials. Windows and SQL Authentication supported. Accepts credential objects (Get-Credential)
 
        .PARAMETER Database
            Database to set up log shipping for.
 
        .PARAMETER BackupNetworkPath
            The backup unc path to place the backup files. This is the root directory.
            A directory with the name of the database will be created in this path.
 
        .PARAMETER BackupLocalPath
            If the backup path is locally for the source server you can also set this value.
 
        .PARAMETER BackupJob
            Name of the backup that will be created in the SQL Server agent.
            The parameter works as a prefix where the name of the database will be added to the backup job name.
            The default is "LSBackup_[databasename]"
 
        .PARAMETER BackupRetention
            The backup retention period in minutes. Default is 4320 / 72 hours
 
        .PARAMETER BackupSchedule
            Name of the backup schedule created for the backup job.
            The parameter works as a prefix where the name of the database will be added to the backup job schedule name.
            Default is "LSBackupSchedule_[databasename]"
 
        .PARAMETER BackupScheduleDisabled
            Parameter to set the backup schedule to disabled upon creation.
            By default the schedule is enabled.
 
        .PARAMETER BackupScheduleFrequencyType
            A value indicating when a job is to be executed.
            Allowed values are "Daily", "AgentStart", "IdleComputer"
 
        .PARAMETER BackupScheduleFrequencyInterval
            The number of type periods to occur between each execution of the backup job.
 
        .PARAMETER BackupScheduleFrequencySubdayType
            Specifies the units for the sub-day FrequencyInterval.
            Allowed values are "Time", "Seconds", "Minutes", "Hours"
 
        .PARAMETER BackupScheduleFrequencySubdayInterval
            The number of sub-day type periods to occur between each execution of the backup job.
 
        .PARAMETER BackupScheduleFrequencyRelativeInterval
            A job's occurrence of FrequencyInterval in each month, if FrequencyInterval is 32 (monthlyrelative).
 
        .PARAMETER BackupScheduleFrequencyRecurrenceFactor
            The number of weeks or months between the scheduled execution of a job. FrequencyRecurrenceFactor is used only if FrequencyType is 8, "Weekly", 16, "Monthly", 32 or "MonthlyRelative".
 
        .PARAMETER BackupScheduleStartDate
            The date on which execution of a job can begin.
 
        .PARAMETER BackupScheduleEndDate
            The date on which execution of a job can stop.
 
        .PARAMETER BackupScheduleStartTime
            The time on any day to begin execution of a job. Format HHMMSS / 24 hour clock.
            Example: '010000' for 01:00:00 AM.
            Example: '140000' for 02:00:00 PM.
 
        .PARAMETER BackupScheduleEndTime
            The time on any day to end execution of a job. Format HHMMSS / 24 hour clock.
            Example: '010000' for 01:00:00 AM.
            Example: '140000' for 02:00:00 PM.
 
        .PARAMETER BackupThreshold
            Is the length of time, in minutes, after the last backup before a threshold alert error is raised.
            The default is 60.
 
        .PARAMETER CompressBackup
            Do the backups need to be compressed. By default the backups are not compressed.
 
        .PARAMETER CopyDestinationFolder
            The path to copy the transaction log backup files to. This is the root directory.
            A directory with the name of the database will be created in this path.
 
        .PARAMETER CopyJob
            Name of the copy job that will be created in the SQL Server agent.
            The parameter works as a prefix where the name of the database will be added to the copy job name.
            The default is "LSBackup_[databasename]"
 
        .PARAMETER CopyRetention
            The copy retention period in minutes. Default is 4320 / 72 hours
 
        .PARAMETER CopySchedule
            Name of the backup schedule created for the copy job.
            The parameter works as a prefix where the name of the database will be added to the copy job schedule name.
            Default is "LSCopy_[DestinationServerName]_[DatabaseName]"
 
        .PARAMETER CopyScheduleDisabled
            Parameter to set the copy schedule to disabled upon creation.
            By default the schedule is enabled.
 
        .PARAMETER CopyScheduleFrequencyType
            A value indicating when a job is to be executed.
            Allowed values are "Daily", "AgentStart", "IdleComputer"
 
        .PARAMETER CopyScheduleFrequencyInterval
            The number of type periods to occur between each execution of the copy job.
 
        .PARAMETER CopyScheduleFrequencySubdayType
            Specifies the units for the subday FrequencyInterval.
            Allowed values are "Time", "Seconds", "Minutes", "Hours"
 
        .PARAMETER CopyScheduleFrequencySubdayInterval
            The number of subday type periods to occur between each execution of the copy job.
 
        .PARAMETER CopyScheduleFrequencyRelativeInterval
            A job's occurrence of FrequencyInterval in each month, if FrequencyInterval is 32 (monthlyrelative).
 
        .PARAMETER CopyScheduleFrequencyRecurrenceFactor
            The number of weeks or months between the scheduled execution of a job. FrequencyRecurrenceFactor is used only if FrequencyType is 8, "Weekly", 16, "Monthly", 32 or "MonthlyRelative".
 
        .PARAMETER CopyScheduleStartDate
            The date on which execution of a job can begin.
 
        .PARAMETER CopyScheduleEndDate
            The date on which execution of a job can stop.
 
        .PARAMETER CopyScheduleStartTime
            The time on any day to begin execution of a job. Format HHMMSS / 24 hour clock.
            Example: '010000' for 01:00:00 AM.
            Example: '140000' for 02:00:00 PM.
 
        .PARAMETER CopyScheduleEndTime
            The time on any day to end execution of a job. Format HHMMSS / 24 hour clock.
            Example: '010000' for 01:00:00 AM.
            Example: '140000' for 02:00:00 PM.
 
        .PARAMETER DisconnectUsers
            If this parameter is set in combinations of standby the users will be disconnected during restore.
 
        .PARAMETER FullBackupPath
            Path to an existing full backup. Use this when an existing backup needs to used to initialize the database on the secondary instance.
 
        .PARAMETER GenerateFullBackup
            If the database is not initialized on the secondary instance it can be done by creating a new full backup and
            restore it for you.
 
        .PARAMETER HistoryRetention
            Is the length of time in minutes in which the history is retained.
            The default value is 14420
 
        .PARAMETER NoRecovery
            If this parameter is set the database will be in recovery mode. The database will not be readable.
            This setting is default.
 
        .PARAMETER NoInitialization
            If this parameter is set the secondary database will not be initialized.
            The database needs to be on the secondary instance in recovery mode.
 
        .PARAMETER PrimaryMonitorServer
            Is the name of the monitor server for the primary server.
            The default is the name of the primary sql server.
 
        .PARAMETER PrimaryMonitorCredential
            Allows you to login to enter a secure credential. Only needs to be used when the PrimaryMonitorServerSecurityMode is 0 or "sqlserver"
            To use: $scred = Get-Credential, then pass $scred object to the -PrimaryMonitorCredential parameter.
 
        .PARAMETER PrimaryMonitorServerSecurityMode
            The security mode used to connect to the monitor server for the primary server. Allowed values are 0, "sqlserver", 1, "windows"
            The default is 1 or Windows.
 
        .PARAMETER PrimaryThresholdAlertEnabled
            Enables the Threshold alert for the primary database
 
        .PARAMETER RestoreDataFolder
            Folder to be used to restore the database data files. Only used when parameter GenerateFullBackup or UseExistingFullBackup are set.
            If the parameter is not set the default data folder of the secondary instance will be used including the name of the database.
            If the folder is set but doesn't exist the default data folder of the secondary instance will be used including the name of the database.
 
        .PARAMETER RestoreLogFolder
            Folder to be used to restore the database log files. Only used when parameter GenerateFullBackup or UseExistingFullBackup are set.
            If the parameter is not set the default transaction log folder of the secondary instance will be used.
            If the folder is set but doesn't exist the default transaction log folder of the secondary instance will be used.
 
        .PARAMETER RestoreDelay
            In case a delay needs to be set for the restore.
            The default is 0.
 
        .PARAMETER RestoreAlertThreshold
            The amount of minutes after which an alert will be raised is no restore has taken place.
            The default is 45 minutes.
 
        .PARAMETER RestoreJob
            Name of the restore job that will be created in the SQL Server agent.
            The parameter works as a prefix where the name of the database will be added to the restore job name.
            The default is "LSRestore_[databasename]"
 
        .PARAMETER RestoreRetention
            The backup retention period in minutes. Default is 4320 / 72 hours
 
        .PARAMETER RestoreSchedule
            Name of the backup schedule created for the restore job.
            The parameter works as a prefix where the name of the database will be added to the restore job schedule name.
            Default is "LSRestore_[DestinationServerName]_[DatabaseName]"
 
        .PARAMETER RestoreScheduleDisabled
            Parameter to set the restore schedule to disabled upon creation.
            By default the schedule is enabled.
 
        .PARAMETER RestoreScheduleFrequencyType
            A value indicating when a job is to be executed.
            Allowed values are "Daily", "AgentStart", "IdleComputer"
 
        .PARAMETER RestoreScheduleFrequencyInterval
            The number of type periods to occur between each execution of the restore job.
 
        .PARAMETER RestoreScheduleFrequencySubdayType
            Specifies the units for the subday FrequencyInterval.
            Allowed values are "Time", "Seconds", "Minutes", "Hours"
 
        .PARAMETER RestoreScheduleFrequencySubdayInterval
            The number of subday type periods to occur between each execution of the restore job.
 
        .PARAMETER RestoreScheduleFrequencyRelativeInterval
            A job's occurrence of FrequencyInterval in each month, if FrequencyInterval is 32 (monthlyrelative).
 
        .PARAMETER RestoreScheduleFrequencyRecurrenceFactor
            The number of weeks or months between the scheduled execution of a job. FrequencyRecurrenceFactor is used only if FrequencyType is 8, "Weekly", 16, "Monthly", 32 or "MonthlyRelative".
 
        .PARAMETER RestoreScheduleStartDate
            The date on which execution of a job can begin.
 
        .PARAMETER RestoreScheduleEndDate
            The date on which execution of a job can stop.
 
        .PARAMETER RestoreScheduleStartTime
            The time on any day to begin execution of a job. Format HHMMSS / 24 hour clock.
            Example: '010000' for 01:00:00 AM.
            Example: '140000' for 02:00:00 PM.
 
        .PARAMETER RestoreScheduleEndTime
            The time on any day to end execution of a job. Format HHMMSS / 24 hour clock.
            Example: '010000' for 01:00:00 AM.
            Example: '140000' for 02:00:00 PM.
 
        .PARAMETER RestoreThreshold
            The number of minutes allowed to elapse between restore operations before an alert is generated.
            The default value = 0
 
        .PARAMETER SecondaryDatabasePrefix
            The secondary database can be renamed to include a prefix.
 
        .PARAMETER SecondaryDatabaseSuffix
            The secondary database can be renamed to include a suffix.
 
        .PARAMETER SecondaryMonitorServer
            Is the name of the monitor server for the secondary server.
            The default is the name of the secondary sql server.
 
        .PARAMETER SecondaryMonitorCredential
            Allows you to login to enter a secure credential. Only needs to be used when the SecondaryMonitorServerSecurityMode is 0 or "sqlserver"
            To use: $scred = Get-Credential, then pass $scred object to the -SecondaryMonitorCredential parameter.
 
        .PARAMETER SecondaryMonitorServerSecurityMode
            The security mode used to connect to the monitor server for the secondary server. Allowed values are 0, "sqlserver", 1, "windows"
            The default is 1 or Windows.
 
        .PARAMETER SecondaryThresholdAlertEnabled
            Enables the Threshold alert for the secondary database
 
        .PARAMETER Standby
            If this parameter is set the database will be set to standby mode making the database readable.
            If not set the database will be in recovery mode.
 
        .PARAMETER StandbyDirectory
            Directory to place the standby file(s) in
 
        .PARAMETER UseExistingFullBackup
            If the database is not initialized on the secondary instance it can be done by selecting an existing full backup
            and restore it for you.
 
        .PARAMETER UseBackupFolder
            This enables the user to specify a specific backup folder containing one or more backup files to initialize the database on the secondary instance.
 
        .PARAMETER WhatIf
            Shows what would happen if the command were to run. No actions are actually performed.
 
        .PARAMETER Confirm
            Prompts you for confirmation before executing any changing operations within the command.
 
        .PARAMETER EnableException
            Use this switch to disable any kind of verbose messages
 
        .PARAMETER Force
            The force parameter will ignore some errors in the parameters and assume defaults.
            It will also remove the any present schedules with the same name for the specific job.
 
        .NOTES
            Tags: LogShipping
            Author: Sander Stad (@sqlstad, sqlstad.nl)
 
            Website: https://dbatools.io
            Copyright: (C) Chrissy LeMaire, clemaire@gmail.com
            License: MIT https://opensource.org/licenses/MIT
 
        .LINK
            https://dbatools.io/Invoke-DbaLogShipping
 
        .EXAMPLE
            $params = @{
                SourceSqlInstance = 'sql1'
                DestinationSqlInstance = 'sql2'
                Database = 'db1'
                BackupNetworkPath= '\\sql1\logshipping'
                BackupLocalPath= 'D:\Data\logshipping'
                BackupScheduleFrequencyType = 'daily'
                BackupScheduleFrequencyInterval = 1
                CompressBackup = $true
                CopyScheduleFrequencyType = 'daily'
                CopyScheduleFrequencyInterval = 1
                GenerateFullBackup = $true
                RestoreScheduleFrequencyType = 'daily'
                RestoreScheduleFrequencyInterval = 1
                SecondaryDatabaseSuffix = 'DR'
                CopyDestinationFolder = '\\sql2\logshippingdest'
                Force = $true
            }
 
            Invoke-DbaLogShipping @params
 
            Sets up log shipping for database "db1" with the backup path to a network share allowing local backups.
            It creates daily schedules for the backup, copy and restore job with all the defaults to be executed every 15 minutes daily.
            The secondary database will be called "db1_LS".
 
        .EXAMPLE
            $params = @{
                SourceSqlInstance = 'sql1'
                DestinationSqlInstance = 'sql2'
                Database = 'db1'
                BackupNetworkPath= '\\sql1\logshipping'
                GenerateFullBackup = $true
                Force = $true
            }
 
            Invoke-DbaLogShipping @params
 
            Sets up log shipping with all defaults except that a backup file is generated.
            The script will show a message that the copy destination has not been supplied and asks if you want to use the default which would be the backup directory of the secondary server with the folder "logshipping" i.e. "D:\SQLBackup\Logshiping".
    #>

    [CmdletBinding(DefaultParameterSetName = "Default", SupportsShouldProcess = $true)]

    param(
        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [Alias("SourceServerInstance", "SourceSqlServerSqlServer", "Source")]
        [object]$SourceSqlInstance,

        [parameter(Mandatory = $true)]
        [ValidateNotNullOrEmpty()]
        [Alias("DestinationServerInstance", "DestinationSqlServer", "Destination")]
        [object]$DestinationSqlInstance,

        [Parameter(Mandatory = $false)]
        [System.Management.Automation.PSCredential]
        $SourceSqlCredential,

        [Parameter(Mandatory = $false)]
        [System.Management.Automation.PSCredential]
        $SourceCredential,

        [Parameter(Mandatory = $false)]
        [System.Management.Automation.PSCredential]
        $DestinationSqlCredential,

        [Parameter(Mandatory = $false)]
        [System.Management.Automation.PSCredential]
        $DestinationCredential,

        [Parameter(Mandatory = $true, ValueFromPipeline = $true)]
        [object[]]$Database,

        [parameter(Mandatory = $true)]
        [string]$BackupNetworkPath,

        [parameter(Mandatory = $false)]
        [string]$BackupLocalPath,

        [parameter(Mandatory = $false)]
        [string]$BackupJob,

        [parameter(Mandatory = $false)]
        [int]$BackupRetention,

        [parameter(Mandatory = $false)]
        [string]$BackupSchedule,

        [parameter(Mandatory = $false)]
        [switch]$BackupScheduleDisabled,

        [parameter(Mandatory = $false)]
        [ValidateSet("Daily", "Weekly", "AgentStart", "IdleComputer")]
        [object]$BackupScheduleFrequencyType,

        [parameter(Mandatory = $false)]
        [object[]]$BackupScheduleFrequencyInterval,

        [parameter(Mandatory = $false)]
        [ValidateSet('Time', 'Seconds', 'Minutes', 'Hours')]
        [object]$BackupScheduleFrequencySubdayType,

        [parameter(Mandatory = $false)]
        [int]$BackupScheduleFrequencySubdayInterval,

        [Parameter(Mandatory = $false)]
        [ValidateSet('Unused', 'First', 'Second', 'Third', 'Fourth', 'Last')]
        [object]$BackupScheduleFrequencyRelativeInterval,

        [Parameter(Mandatory = $false)]
        [int]$BackupScheduleFrequencyRecurrenceFactor,

        [parameter(Mandatory = $false)]
        [string]$BackupScheduleStartDate,

        [parameter(Mandatory = $false)]
        [string]$BackupScheduleEndDate,

        [parameter(Mandatory = $false)]
        [string]$BackupScheduleStartTime,

        [parameter(Mandatory = $false)]
        [string]$BackupScheduleEndTime,

        [parameter(Mandatory = $false)]
        [int]$BackupThreshold,

        [parameter(Mandatory = $false)]
        [switch]$CompressBackup,

        [parameter(Mandatory = $false)]
        [string]$CopyDestinationFolder,

        [parameter(Mandatory = $false)]
        [string]$CopyJob,

        [parameter(Mandatory = $false)]
        [int]$CopyRetention,

        [parameter(Mandatory = $false)]
        [string]$CopySchedule,

        [parameter(Mandatory = $false)]
        [switch]$CopyScheduleDisabled,

        [parameter(Mandatory = $false)]
        [ValidateSet("Daily", "Weekly", "AgentStart", "IdleComputer")]
        [object]$CopyScheduleFrequencyType,

        [parameter(Mandatory = $false)]
        [object[]]$CopyScheduleFrequencyInterval,

        [parameter(Mandatory = $false)]
        [ValidateSet('Time', 'Seconds', 'Minutes', 'Hours')]
        [object]$CopyScheduleFrequencySubdayType,

        [parameter(Mandatory = $false)]
        [int]$CopyScheduleFrequencySubdayInterval,

        [Parameter(Mandatory = $false)]
        [ValidateSet('Unused', 'First', 'Second', 'Third', 'Fourth', 'Last')]
        [object]$CopyScheduleFrequencyRelativeInterval,

        [Parameter(Mandatory = $false)]
        [int]$CopyScheduleFrequencyRecurrenceFactor,

        [parameter(Mandatory = $false)]
        [string]$CopyScheduleStartDate,

        [parameter(Mandatory = $false)]
        [string]$CopyScheduleEndDate,

        [parameter(Mandatory = $false)]
        [string]$CopyScheduleStartTime,

        [parameter(Mandatory = $false)]
        [string]$CopyScheduleEndTime,

        [parameter(Mandatory = $false)]
        [switch]$DisconnectUsers,

        [parameter(Mandatory = $false)]
        [string]$FullBackupPath,

        [parameter(Mandatory = $false)]
        [switch]$GenerateFullBackup,

        [parameter(Mandatory = $false)]
        [int]$HistoryRetention,

        [parameter(Mandatory = $false)]
        [switch]$NoRecovery,

        [parameter(Mandatory = $false)]
        [switch]$NoInitialization,

        [Parameter(Mandatory = $false)]
        [string]$PrimaryMonitorServer,

        [Parameter(Mandatory = $false)]
        [System.Management.Automation.PSCredential]
        $PrimaryMonitorCredential,

        [Parameter(Mandatory = $false)]
        [ValidateSet(0, "sqlserver", 1, "windows")]
        [object]$PrimaryMonitorServerSecurityMode,

        [Parameter(Mandatory = $false)]
        [switch]$PrimaryThresholdAlertEnabled,

        [parameter(Mandatory = $false)]
        [string]$RestoreDataFolder,

        [parameter(Mandatory = $false)]
        [string]$RestoreLogFolder,

        [parameter(Mandatory = $false)]
        [int]$RestoreDelay,

        [parameter(Mandatory = $false)]
        [int]$RestoreAlertThreshold,

        [parameter(Mandatory = $false)]
        [string]$RestoreJob,

        [parameter(Mandatory = $false)]
        [int]$RestoreRetention,

        [parameter(Mandatory = $false)]
        [string]$RestoreSchedule,

        [parameter(Mandatory = $false)]
        [switch]$RestoreScheduleDisabled,

        [parameter(Mandatory = $false)]
        [ValidateSet("Daily", "Weekly", "AgentStart", "IdleComputer")]
        [object]$RestoreScheduleFrequencyType,

        [parameter(Mandatory = $false)]
        [object[]]$RestoreScheduleFrequencyInterval,

        [parameter(Mandatory = $false)]
        [ValidateSet('Time', 'Seconds', 'Minutes', 'Hours')]
        [object]$RestoreScheduleFrequencySubdayType,

        [parameter(Mandatory = $false)]
        [int]$RestoreScheduleFrequencySubdayInterval,

        [Parameter(Mandatory = $false)]
        [ValidateSet('Unused', 'First', 'Second', 'Third', 'Fourth', 'Last')]
        [object]$RestoreScheduleFrequencyRelativeInterval,

        [Parameter(Mandatory = $false)]
        [int]$RestoreScheduleFrequencyRecurrenceFactor,

        [parameter(Mandatory = $false)]
        [string]$RestoreScheduleStartDate,

        [parameter(Mandatory = $false)]
        [string]$RestoreScheduleEndDate,

        [parameter(Mandatory = $false)]
        [string]$RestoreScheduleStartTime,

        [parameter(Mandatory = $false)]
        [string]$RestoreScheduleEndTime,

        [parameter(Mandatory = $false)]
        [int]$RestoreThreshold,

        [parameter(Mandatory = $false)]
        [string]$SecondaryDatabasePrefix,

        [parameter(Mandatory = $false)]
        [string]$SecondaryDatabaseSuffix,

        [Parameter(Mandatory = $false)]
        [string]$SecondaryMonitorServer,

        [Parameter(Mandatory = $false)]
        [System.Management.Automation.PSCredential]
        $SecondaryMonitorCredential,

        [Parameter(Mandatory = $false)]
        [ValidateSet(0, "sqlserver", 1, "windows")]
        [object]$SecondaryMonitorServerSecurityMode,

        [Parameter(Mandatory = $false)]
        [switch]$SecondaryThresholdAlertEnabled,

        [parameter(Mandatory = $false)]
        [switch]$Standby,

        [parameter(Mandatory = $false)]
        [string]$StandbyDirectory,

        [parameter(Mandatory = $false)]
        [switch]$UseExistingFullBackup,

        [parameter(Mandatory = $false)]
        [string]$UseBackupFolder,

        [switch]$Force,

        [Alias('Silent')]
        [switch]$EnableException
    )

    begin {
        Write-Message -Message "Started log shipping for $SourceSqlInstance to $DestinationSqlInstance" -Level Output

        # Try connecting to the instance
        Write-Message -Message "Connecting to source Sql Server $SourceSqlInstance.." -Level Output
        try {
            $SourceServer = Connect-SqlInstance -SqlInstance $SourceSqlInstance -SqlCredential $SourceSqlCredential
        }
        catch {
            Stop-Function -Message "Could not connect to Sql Server instance $SourceSqlInstance" -ErrorRecord $_ -Target $SourceSqlInstance
            return
        }

        # Try connecting to the instance
        Write-Message -Message "Connecting to destination Sql Server $DestinationSqlInstance.." -Level Output
        try {
            $DestinationServer = Connect-SqlInstance -SqlInstance $DestinationSqlInstance -SqlCredential $DestinationSqlCredential
        }
        catch {
            Stop-Function -Message "Could not connect to Sql Server instance $DestinationSqlInstance" -ErrorRecord $_ -Target $DestinationSqlInstance
            return
        }

        # Check the instance if it is a named instance
        $SourceServerName, $SourceInstanceName = $SourceSqlInstance.Split("\")
        $DestinationServerName, $DestinationInstanceName = $DestinationSqlInstance.Split("\")

        if ($SourceInstanceName -eq $null) {
            $SourceInstanceName = "MSSQLSERVER"
        }

        if ($DestinationInstanceName -eq $null) {
            $DestinationInstanceName = "MSSQLSERVER"
        }

        $IsSourceLocal = $false
        $IsDestinationLocal = $false

        # Check if it's local or remote
        if ($SourceServerName -in ".", "localhost", $env:ServerName, "127.0.0.1") {
            $IsSourceLocal = $true
        }
        if ($DestinationServerName -in ".", "localhost", $env:ServerName, "127.0.0.1") {
            $IsDestinationLocal = $true
        }

        # Set up regex strings for several checks
        $RegexDate = '(?<!\d)(?:(?:(?:1[6-9]|[2-9]\d)?\d{2})(?:(?:(?:0[13578]|1[02])31)|(?:(?:0[1,3-9]|1[0-2])(?:29|30)))|(?:(?:(?:(?:1[6-9]|[2-9]\d)?(?:0[48]|[2468][048]|[13579][26])|(?:(?:16|[2468][048]|[3579][26])00)))0229)|(?:(?:1[6-9]|[2-9]\d)?\d{2})(?:(?:0?[1-9])|(?:1[0-2]))(?:0?[1-9]|1\d|2[0-8]))(?!\d)'
        $RegexTime = '^(?:(?:([01]?\d|2[0-3]))?([0-5]?\d))?([0-5]?\d)$'
        $RegexUnc = '^\\(?:\\[^<>:`"/\\|?*]+)+$'

        # Check the instance names and the database settings
        if (($SourceSqlInstance -eq $DestinationSqlInstance) -and (-not $SecondaryDatabasePrefix -or $SecondaryDatabaseSuffix)) {
            Stop-Function -Message "The destination database is the same as the source`nPlease enter a prefix or suffix using -SecondaryDatabasePrefix or -SecondaryDatabaseSuffix." -Target $SourceSqlInstance
            return
        }

        # Check the connection timeout
        if ($SourceServer.ConnectionContext.StatementTimeout -ne 0) {
            $SourceServer.ConnectionContext.StatementTimeout = 0
            Write-Message -Message "Connection timeout of $SourceServer is set to 0" -Level Verbose
        }

        if ($DestinationServer.ConnectionContext.StatementTimeout -ne 0) {
            $DestinationServer.ConnectionContext.StatementTimeout = 0
            Write-Message -Message "Connection timeout of $DestinationServer is set to 0" -Level Verbose
        }

        # Check the backup network path
        Write-Message -Message "Testing backup network path $BackupNetworkPath" -Level Verbose
        if ((Test-DbaSqlPath -Path $BackupNetworkPath -SqlInstance $SourceSqlInstance -SqlCredential $SourceCredential) -ne $true) {
            Stop-Function -Message "Backup network path $BackupNetworkPath is not valid or can't be reached." -Target $SourceSqlInstance
            return
        }
        elseif ($BackupNetworkPath -notmatch $RegexUnc) {
            Stop-Function -Message "Backup network path $BackupNetworkPath has to be in the form of \\server\share." -Target $SourceSqlInstance
            return
        }

        # Check the copy destination
        if (-not $CopyDestinationFolder) {
            # Make a default copy destination by retrieving the backup folder and adding a directory
            $CopyDestinationFolder = "$($DestinationServer.Settings.BackupDirectory)\Logshipping"

            # Check to see if the path already exists
            Write-Message -Message "Testing copy destination path $CopyDestinationFolder" -Level Verbose
            if (Test-DbaSqlPath -Path $CopyDestinationFolder -SqlInstance $DestinationSqlInstance -SqlCredential $DestinationCredential) {
                Write-Message -Message "Copy destination $CopyDestinationFolder already exists" -Level Verbose
            }
            else {
                # Check if force is being used
                if (-not $Force) {
                    # Set up the confirm part
                    $message = "The copy destination is missing. Do you want to use the default $($CopyDestinationFolder)?"
                    $choiceYes = New-Object System.Management.Automation.Host.ChoiceDescription "&Yes", "Answer Yes."
                    $choiceNo = New-Object System.Management.Automation.Host.ChoiceDescription "&No", "Answer No."
                    $options = [System.Management.Automation.Host.ChoiceDescription[]]($choiceYes, $choiceNo)
                    $result = $host.ui.PromptForChoice($title, $message, $options, 0)

                    # Check the result from the confirm
                    switch ($result) {
                        # If yes
                        0 {
                            # Try to create the new directory
                            try {
                                # If the destination server is remote and the credential is set
                                if (-not $IsDestinationLocal -and $DestinationCredential) {
                                    Invoke-Command2 -ComputerName $DestinationServerName -Credential $DestinationCredential -ScriptBlock {
                                        Write-Message -Message "Creating copy destination folder $CopyDestinationFolder" -Level Verbose
                                        New-Item -Path $CopyDestinationFolder -ItemType Directory -Credential $DestinationCredential -Force:$Force | Out-Null
                                    }
                                }
                                # If the server is local and the credential is set
                                elseif ($DestinationCredential) {
                                    Invoke-Command2 -Credential $DestinationCredential -ScriptBlock {
                                        Write-Message -Message "Creating copy destination folder $CopyDestinationFolder" -Level Verbose
                                        New-Item -Path $CopyDestinationFolder -ItemType Directory -Credential $DestinationCredential -Force:$Force | Out-Null
                                    }
                                }
                                # If the server is local and the credential is not set
                                else {
                                    Write-Message -Message "Creating copy destination folder $CopyDestinationFolder" -Level Verbose
                                    New-Item -Path $CopyDestinationFolder -Force:$Force -ItemType Directory | Out-Null
                                }
                                Write-Message -Message "Copy destination $CopyDestinationFolder created." -Level Verbose
                            }
                            catch {
                                Stop-Function -Message "Something went wrong creating the copy destination folder $CopyDestinationFolder. `n$_" -Target $DestinationSqlInstance -ErrorRecord $_
                                return
                            }
                        }
                        1 {
                            Stop-Function -Message "Copy destination is a mandatory parameter. Please make sure the value is entered." -Target $DestinationSqlInstance
                            return
                        }
                    } # switch
                } # if not force
                else {
                    # Try to create the copy destination on the local server
                    try {
                        Write-Message -Message "Creating copy destination folder $CopyDestinationFolder" -Level Verbose
                        New-Item $CopyDestinationFolder -ItemType Directory -Credential $DestinationCredential -Force:$Force | Out-Null
                        Write-Message -Message "Copy destination $CopyDestinationFolder created." -Level Verbose
                    }
                    catch {
                        Stop-Function -Message "Something went wrong creating the copy destination folder $CopyDestinationFolder. `n$_" -Target $DestinationSqlInstance -ErrorRecord $_
                        return
                    }
                } # else not force
            } # if test path copy destination
        } # if not copy destination

        Write-Message -Message "Testing copy destination path $CopyDestinationFolder" -Level Verbose
        if ((Test-DbaSqlPath -Path $CopyDestinationFolder -SqlInstance $DestinationSqlInstance -SqlCredential $DestinationCredential) -ne $true) {
            Stop-Function -Message "Copy destination folder $CopyDestinationFolder is not valid or can't be reached." -Target $DestinationSqlInstance
            return
        }
        elseif ($CopyDestinationFolder.StartsWith("\\") -and $CopyDestinationFolder -notmatch $RegexUnc) {
            Stop-Function -Message "Copy destination folder $CopyDestinationFolder has to be in the form of \\server\share." -Target $DestinationSqlInstance
            return
        }

        # Check the backup compression
        if ($SourceServer.Version.Major -gt 9) {
            if ($CompressBackup) {
                Write-Message -Message "Setting backup compression to 1." -Level Verbose
                [bool]$BackupCompression = 1
            }
            else {
                $backupServerSetting = (Get-DbaSpConfigure -SqlInstance $SourceSqlInstance -ConfigName DefaultBackupCompression).ConfiguredValue
                Write-Message -Message "Setting backup compression to default server setting $backupServerSetting." -Level Verbose
                [bool]$BackupCompression = $backupServerSetting
            }
        }
        else {
            Write-Message -Message "Source server $SourceServer does not support backup compression" -Level Verbose
        }

        # Check the database parameter
        if ($Database) {
            foreach ($db in $Database) {
                if ($db -notin $SourceServer.Databases.Name) {
                    Stop-Function -Message "Database $db cannot be found on instance $SourceSqlInstance" -Target $SourceSqlInstance
                }

                $DatabaseCollection = $SourceServer.Databases | Where-Object { $_.Name -in $Database }
            }
        }
        else {
            Stop-Function -Message "Please supply a database to set up log shipping for" -Target $SourceSqlInstance -Continue
        }

        # Set the database mode
        if ($Standby) {
            $DatabaseStatus = 1
            Write-Message -Message "Destination database status set to STANDBY" -Level Verbose
        }
        else {
            $DatabaseStatus = 0
            Write-Message -Message "Destination database status set to NO RECOVERY" -Level Verbose
        }

        # Setting defaults
        if (-not $BackupRetention) {
            $BackupRetention = 4320
            Write-Message -Message "Backup retention set to $BackupRetention" -Level Verbose
        }
        if (-not $BackupThreshold) {
            $BackupThreshold = 60
            Write-Message -Message "Backup Threshold set to $BackupThreshold" -Level Verbose
        }
        if (-not $CopyRetention) {
            $CopyRetention = 4320
            Write-Message -Message "Copy retention set to $CopyRetention" -Level Verbose
        }
        if (-not $HistoryRetention) {
            $HistoryRetention = 14420
            Write-Message -Message "History retention set to $HistoryRetention" -Level Verbose
        }
        if (-not $RestoreAlertThreshold) {
            $RestoreAlertThreshold = 45
            Write-Message -Message "Restore alert Threshold set to $RestoreAlertThreshold" -Level Verbose
        }
        if (-not $RestoreDelay) {
            $RestoreDelay = 0
            Write-Message -Message "Restore delay set to $RestoreDelay" -Level Verbose
        }
        if (-not $RestoreRetention) {
            $RestoreRetention = 4320
            Write-Message -Message "Restore retention set to $RestoreRetention" -Level Verbose
        }
        if (-not $RestoreThreshold) {
            $RestoreThreshold = 0
            Write-Message -Message "Restore Threshold set to $RestoreThreshold" -Level Verbose
        }
        if (-not $PrimaryMonitorServerSecurityMode) {
            $PrimaryMonitorServerSecurityMode = 1
            Write-Message -Message "Primary monitor server security mode set to $PrimaryMonitorServerSecurityMode" -Level Verbose
        }
        if (-not $SecondaryMonitorServerSecurityMode) {
            $SecondaryMonitorServerSecurityMode = 1
            Write-Message -Message "Secondary monitor server security mode set to $SecondaryMonitorServerSecurityMode" -Level Verbose
        }
        if (-not $BackupScheduleFrequencyType) {
            $BackupScheduleFrequencyType = "Daily"
            Write-Message -Message "Backup frequency type set to $BackupScheduleFrequencyType" -Level Verbose
        }
        if (-not $BackupScheduleFrequencyInterval) {
            $BackupScheduleFrequencyInterval = "EveryDay"
            Write-Message -Message "Backup frequency interval set to $BackupScheduleFrequencyInterval" -Level Verbose
        }
        if (-not $BackupScheduleFrequencySubdayType) {
            $BackupScheduleFrequencySubdayType = "Minutes"
            Write-Message -Message "Backup frequency subday type set to $BackupScheduleFrequencySubdayType" -Level Verbose
        }
        if (-not $BackupScheduleFrequencySubdayInterval) {
            $BackupScheduleFrequencySubdayInterval = 15
            Write-Message -Message "Backup frequency subday interval set to $BackupScheduleFrequencySubdayInterval" -Level Verbose
        }
        if (-not $BackupScheduleFrequencyRelativeInterval) {
            $BackupScheduleFrequencyRelativeInterval = "Unused"
            Write-Message -Message "Backup frequency relative interval set to $BackupScheduleFrequencyRelativeInterval" -Level Verbose
        }
        if (-not $BackupScheduleFrequencyRecurrenceFactor) {
            $BackupScheduleFrequencyRecurrenceFactor = 0
            Write-Message -Message "Backup frequency recurrence factor set to $BackupScheduleFrequencyRecurrenceFactor" -Level Verbose
        }
        if (-not $CopyScheduleFrequencyType) {
            $CopyScheduleFrequencyType = "Daily"
            Write-Message -Message "Copy frequency type set to $CopyScheduleFrequencyType" -Level Verbose
        }
        if (-not $CopyScheduleFrequencyInterval) {
            $CopyScheduleFrequencyInterval = "EveryDay"
            Write-Message -Message "Copy frequency interval set to $CopyScheduleFrequencyInterval" -Level Verbose
        }
        if (-not $CopyScheduleFrequencySubdayType) {
            $CopyScheduleFrequencySubdayType = "Minutes"
            Write-Message -Message "Copy frequency subday type set to $CopyScheduleFrequencySubdayType" -Level Verbose
        }
        if (-not $CopyScheduleFrequencySubdayInterval) {
            $CopyScheduleFrequencySubdayInterval = 15
            Write-Message -Message "Copy frequency subday interval set to $CopyScheduleFrequencySubdayInterval" -Level Verbose
        }
        if (-not $CopyScheduleFrequencyRelativeInterval) {
            $CopyScheduleFrequencyRelativeInterval = "Unused"
            Write-Message -Message "Copy frequency relative interval set to $CopyScheduleFrequencyRelativeInterval" -Level Verbose
        }
        if (-not $CopyScheduleFrequencyRecurrenceFactor) {
            $CopyScheduleFrequencyRecurrenceFactor = 0
            Write-Message -Message "Copy frequency recurrence factor set to $CopyScheduleFrequencyRecurrenceFactor" -Level Verbose
        }
        if (-not $RestoreScheduleFrequencyType) {
            $RestoreScheduleFrequencyType = "Daily"
            Write-Message -Message "Restore frequency type set to $RestoreScheduleFrequencyType" -Level Verbose
        }
        if (-not $RestoreScheduleFrequencyInterval) {
            $RestoreScheduleFrequencyInterval = "EveryDay"
            Write-Message -Message "Restore frequency interval set to $RestoreScheduleFrequencyInterval" -Level Verbose
        }
        if (-not $RestoreScheduleFrequencySubdayType) {
            $RestoreScheduleFrequencySubdayType = "Minutes"
            Write-Message -Message "Restore frequency subday type set to $RestoreScheduleFrequencySubdayType" -Level Verbose
        }
        if (-not $RestoreScheduleFrequencySubdayInterval) {
            $RestoreScheduleFrequencySubdayInterval = 15
            Write-Message -Message "Restore frequency subday interval set to $RestoreScheduleFrequencySubdayInterval" -Level Verbose
        }
        if (-not $RestoreScheduleFrequencyRelativeInterval) {
            $RestoreScheduleFrequencyRelativeInterval = "Unused"
            Write-Message -Message "Restore frequency relative interval set to $RestoreScheduleFrequencyRelativeInterval" -Level Verbose
        }
        if (-not $RestoreScheduleFrequencyRecurrenceFactor) {
            $RestoreScheduleFrequencyRecurrenceFactor = 0
            Write-Message -Message "Restore frequency recurrence factor set to $RestoreScheduleFrequencyRecurrenceFactor" -Level Verbose
        }
        if (-not ($SecondaryDatabasePrefix -or $SecondaryDatabaseSuffix) -and ($SourceServer.Name -eq $DestinationServer.Name) -and ($SourceServer.InstanceName -eq $DestinationServer.InstanceName)) {
            if ($Force) {
                $SecondaryDatabaseSuffix = "_LS"
            }
            else {
                Stop-Function -Message "Destination database is the same as source database.`nPlease check the secondary server, database prefix or suffix or use -Force to set the secondary databse using a suffix." -Target $SourceSqlInstance
                return
            }
        }

        # Checking for contradicting variables
        if ($NoInitialization -and ($GenerateFullBackup -or $UseExistingFullBackup)) {
            Stop-Function -Message "Cannot use -NoInitialization with -GenerateFullBackup or -UseExistingFullBackup" -Target $DestinationSqlInstance
            return
        }

        if ($UseBackupFolder -and ($GenerateFullBackup -or $NoInitialization -or $UseExistingFullBackup)) {
            Stop-Function -Message "Cannot use -UseBackupFolder with -GenerateFullBackup, -NoInitialization or -UseExistingFullBackup" -Target $DestinationSqlInstance
            return
        }

        # Check the subday interval
        if (($BackupScheduleFrequencySubdayType -in 2, "Seconds", 4, "Minutes") -and (-not ($BackupScheduleFrequencySubdayInterval -ge 1 -or $BackupScheduleFrequencySubdayInterval -le 59))) {
            Stop-Function -Message "Backup subday interval $BackupScheduleFrequencySubdayInterval must be between 1 and 59 when subday type is 2, 'Seconds', 4 or 'Minutes'" -Target $SourceSqlInstance
            return
        }
        elseif (($BackupScheduleFrequencySubdayType -in 8, "Hours") -and (-not ($BackupScheduleFrequencySubdayInterval -ge 1 -and $BackupScheduleFrequencySubdayInterval -le 23))) {
            Stop-Function -Message "Backup Subday interval $BackupScheduleFrequencySubdayInterval must be between 1 and 23 when subday type is 8 or 'Hours" -Target $SourceSqlInstance
            return
        }

        # Check the subday interval
        if (($CopyScheduleFrequencySubdayType -in 2, "Seconds", 4, "Minutes") -and (-not ($CopyScheduleFrequencySubdayInterval -ge 1 -or $CopyScheduleFrequencySubdayInterval -le 59))) {
            Stop-Function -Message "Copy subday interval $CopyScheduleFrequencySubdayInterval must be between 1 and 59 when subday type is 2, 'Seconds', 4 or 'Minutes'" -Target $DestinationSqlInstance
            return
        }
        elseif (($CopyScheduleFrequencySubdayType -in 8, "Hours") -and (-not ($CopyScheduleFrequencySubdayInterval -ge 1 -and $CopyScheduleFrequencySubdayInterval -le 23))) {
            Stop-Function -Message "Copy subday interval $CopyScheduleFrequencySubdayInterval must be between 1 and 23 when subday type is 8 or 'Hours'" -Target $DestinationSqlInstance
            return
        }

        # Check the subday interval
        if (($RestoreScheduleFrequencySubdayType -in 2, "Seconds", 4, "Minutes") -and (-not ($RestoreScheduleFrequencySubdayInterval -ge 1 -or $RestoreScheduleFrequencySubdayInterval -le 59))) {
            Stop-Function -Message "Restore subday interval $RestoreScheduleFrequencySubdayInterval must be between 1 and 59 when subday type is 2, 'Seconds', 4 or 'Minutes'" -Target $DestinationSqlInstance
            return
        }
        elseif (($RestoreScheduleFrequencySubdayType -in 8, "Hours") -and (-not ($RestoreScheduleFrequencySubdayInterval -ge 1 -and $RestoreScheduleFrequencySubdayInterval -le 23))) {
            Stop-Function -Message "Restore subday interval $RestoreScheduleFrequencySubdayInterval must be between 1 and 23 when subday type is 8 or 'Hours" -Target $DestinationSqlInstance
            return
        }

        # Check the backup start date
        if (-not $BackupScheduleStartDate) {
            $BackupScheduleStartDate = (Get-Date -format "yyyyMMdd")
            Write-Message -Message "Backup start date set to $BackupScheduleStartDate" -Level Verbose
        }
        else {
            if ($BackupScheduleStartDate -notmatch $RegexDate) {
                Stop-Function -Message "Backup start date $BackupScheduleStartDate needs to be a valid date with format yyyyMMdd" -Target $SourceSqlInstance
                return
            }
        }

        # Check the back start time
        if (-not $BackupScheduleStartTime) {
            $BackupScheduleStartTime = '000000'
            Write-Message -Message "Backup start time set to $BackupScheduleStartTime" -Level Verbose
        }
        elseif ($BackupScheduleStartTime -notmatch $RegexTime) {
            Stop-Function -Message  "Backup start time $BackupScheduleStartTime needs to match between '000000' and '235959'" -Target $SourceSqlInstance
            return
        }

        # Check the back end time
        if (-not $BackupScheduleEndTime) {
            $BackupScheduleEndTime = '235959'
            Write-Message -Message "Backup end time set to $BackupScheduleEndTime" -Level Verbose
        }
        elseif ($BackupScheduleStartTime -notmatch $RegexTime) {
            Stop-Function -Message  "Backup end time $BackupScheduleStartTime needs to match between '000000' and '235959'" -Target $SourceSqlInstance
            return
        }

        # Check the backup end date
        if (-not $BackupScheduleEndDate) {
            $BackupScheduleEndDate = '99991231'
        }
        elseif ($BackupScheduleEndDate -notmatch $RegexDate) {
            Stop-Function -Message "Backup end date $BackupScheduleEndDate needs to be a valid date with format yyyyMMdd" -Target $SourceSqlInstance
            return
        }

        # Check the copy start date
        if (-not $CopyScheduleStartDate) {
            $CopyScheduleStartDate = (Get-Date -format "yyyyMMdd")
            Write-Message -Message "Copy start date set to $CopyScheduleStartDate" -Level Verbose
        }
        else {
            if ($CopyScheduleStartDate -notmatch $RegexDate) {
                Stop-Function -Message "Copy start date $CopyScheduleStartDate needs to be a valid date with format yyyyMMdd" -Target $SourceSqlInstance
                return
            }
        }

        # Check the copy end date
        if (-not $CopyScheduleEndDate) {
            $CopyScheduleEndDate = '99991231'
        }
        elseif ($CopyScheduleEndDate -notmatch $RegexDate) {
            Stop-Function -Message "Copy end date $CopyScheduleEndDate needs to be a valid date with format yyyyMMdd" -Target $SourceSqlInstance
            return
        }

        # Check the copy start time
        if (-not $CopyScheduleStartTime) {
            $CopyScheduleStartTime = '000000'
            Write-Message -Message "Copy start time set to $CopyScheduleStartTime" -Level Verbose
        }
        elseif ($CopyScheduleStartTime -notmatch $RegexTime) {
            Stop-Function -Message  "Copy start time $CopyScheduleStartTime needs to match between '000000' and '235959'" -Target $SourceSqlInstance
            return
        }

        # Check the copy end time
        if (-not $CopyScheduleEndTime) {
            $CopyScheduleEndTime = '235959'
            Write-Message -Message "Copy end time set to $CopyScheduleEndTime" -Level Verbose
        }
        elseif ($CopyScheduleEndTime -notmatch $RegexTime) {
            Stop-Function -Message  "Copy end time $CopyScheduleEndTime needs to match between '000000' and '235959'" -Target $SourceSqlInstance
            return
        }

        # Check the restore start date
        if (-not $RestoreScheduleStartDate) {
            $RestoreScheduleStartDate = (Get-Date -format "yyyyMMdd")
            Write-Message -Message "Restore start date set to $RestoreScheduleStartDate" -Level Verbose
        }
        else {
            if ($RestoreScheduleStartDate -notmatch $RegexDate) {
                Stop-Function -Message "Restore start date $RestoreScheduleStartDate needs to be a valid date with format yyyyMMdd" -Target $SourceSqlInstance
                return
            }
        }

        # Check the restore end date
        if (-not $RestoreScheduleEndDate) {
            $RestoreScheduleEndDate = '99991231'
        }
        elseif ($RestoreScheduleEndDate -notmatch $RegexDate) {
            Stop-Function -Message "Restore end date $RestoreScheduleEndDate needs to be a valid date with format yyyyMMdd" -Target $SourceSqlInstance
            return
        }

        # Check the restore start time
        if (-not $RestoreScheduleStartTime) {
            $RestoreScheduleStartTime = '000000'
            Write-Message -Message "Restore start time set to $RestoreScheduleStartTime" -Level Verbose
        }
        elseif ($RestoreScheduleStartTime -notmatch $RegexTime) {
            Stop-Function -Message  "Restore start time $RestoreScheduleStartTime needs to match between '000000' and '235959'" -Target $SourceSqlInstance
            return
        }

        # Check the restore end time
        if (-not $RestoreScheduleEndTime) {
            $RestoreScheduleEndTime = '235959'
            Write-Message -Message "Restore end time set to $RestoreScheduleEndTime" -Level Verbose
        }
        elseif ($RestoreScheduleEndTime -notmatch $RegexTime) {
            Stop-Function -Message  "Restore end time $RestoreScheduleEndTime needs to match between '000000' and '235959'" -Target $SourceSqlInstance
            return
        }

        # Check if standby is being used
        if ($Standby) {

            # Check the stand-by directory
            if ($StandbyDirectory) {
                # Check if the path is reachable for the destination server
                if ((Test-DbaSqlPath -Path $StandbyDirectory -SqlInstance $DestinationSqlInstance -SqlCredential $DestinationCredential) -ne $true) {
                    Stop-Function -Message "The directory $StandbyDirectory cannot be reached by the destination instance. Please check the permission and credentials." -Target $DestinationSqlInstance
                    return
                }
            }
            elseif (-not $StandbyDirectory -and $Force) {
                $StandbyDirectory = $DestinationSqlInstance.BackupDirectory
                Write-Message -Message "Stand-by directory was not set. Setting it to $StandbyDirectory" -Level Verbose
            }
            else {
                Stop-Function -Message "Please set the parameter -StandbyDirectory when using -Standby" -Target $SourceSqlInstance
                return
            }
        }
    } # begin

    process {

        if (Test-FunctionInterrupt) { return }

        # Loop through each of the databases
        foreach ($db in $DatabaseCollection) {

            # Check the status of the database
            if ($db.RecoveryModel -ne 'Full') {
                Stop-Function -Message  "Database $db is not in FULL recovery mode" -Target $SourceSqlInstance -Continue
            }

            # Set the intital destination database
            $SecondaryDatabase = $db.Name

            # Set the database prefix
            if ($SecondaryDatabasePrefix) {
                $SecondaryDatabase = "$SecondaryDatabasePrefix$($db.Name)"
            }

            # Set the database suffix
            if ($SecondaryDatabaseSuffix) {
                $SecondaryDatabase += $SecondaryDatabaseSuffix
            }

            # Check is the database is already initialized an check if the database exists on the secondary instance
            if ($NoInitialization -and ($DestinationServer.Databases.Name -notcontains $SecondaryDatabase)) {
                Stop-Function -Message "Database $SecondaryDatabase needs to be initialized before log shipping setting can continue." -Target $SourceSqlInstance -Continue
            }

            # Check the local backup path
            if ($BackupLocalPath) {
                if ($BackupLocalPath.EndsWith("\")) {
                    $DatabaseBackupLocalPath = "$BackupLocalPath$($db.Name)"
                }
                else {
                    $DatabaseBackupLocalPath = "$BackupLocalPath\$($db.Name)"
                }
            }
            else {
                $BackupLocalPath = $BackupNetworkPath

                if ($BackupLocalPath.EndsWith("\")) {
                    $DatabaseBackupLocalPath = "$BackupLocalPath$($db.Name)"
                }
                else {
                    $DatabaseBackupLocalPath = "$BackupLocalPath\$($db.Name)"
                }
            }
            Write-Message -Message "Backup local path set to $DatabaseBackupLocalPath." -Level Verbose

            # Setting the backup network path for the database
            if ($BackupNetworkPath.EndsWith("\")) {
                $DatabaseBackupNetworkPath = "$BackupNetworkPath$($db.Name)"
            }
            else {
                $DatabaseBackupNetworkPath = "$BackupNetworkPath\$($db.Name)"
            }
            Write-Message -Message "Backup network path set to $DatabaseBackupNetworkPath." -Level Verbose


            # Checking if the database network path exists
            Write-Message -Message "Testing database backup network path $DatabaseBackupNetworkPath" -Level Verbose
            if ((Test-DbaSqlPath -Path $DatabaseBackupNetworkPath -SqlInstance $SourceSqlInstance -SqlCredential $SourceCredential) -ne $true) {
                # To to create the backup directory for the database
                try {
                    Write-Message -Message "Database backup network path $DatabaseBackupNetworkPath not found. Trying to create it.." -Level Verbose

                    Invoke-Command2 -Credential $SourceCredential -ScriptBlock {
                        Write-Message -Message "Creating backup folder $DatabaseBackupNetworkPath" -Level Verbose
                        New-Item -Path $DatabaseBackupNetworkPath -ItemType Directory -Credential $SourceCredential -Force:$Force | Out-Null
                    }
                }
                catch {
                    Stop-Function -Message "Something went wrong creating the directory" -ErrorRecord $_ -Target $SourceSqlInstance -Continue
                }
            }

            # Check if the backup job name is set
            if ($BackupJob) {
                $DatabaseBackupJob = "$BackupJob_$($db.Name)"
            }
            else {
                $DatabaseBackupJob = "LSBackup_$($db.Name)"
            }
            Write-Message -Message "Backup job name set to $DatabaseBackupJob" -Level Verbose

            # Check if the backup job schedule name is set
            if ($BackupSchedule) {
                $DatabaseBackupSchedule = "$BackupSchedule_$($db.Name)"
            }
            else {
                $DatabaseBackupSchedule = "LSBackupSchedule_$($db.Name)"
            }
            Write-Message -Message "Backup job schedule name set to $DatabaseBackupSchedule" -Level Verbose

            # Check if secondary database is present on secondary instance
            if (-not $Force -and -not $NoInitialization -and ($DestinationServer.Databases[$SecondaryDatabase].Status -ne 'Restoring') -and ($DestinationServer.Databases.Name -contains $SecondaryDatabase)) {
                Stop-Function -Message "Secondary database already exists on instance $DestinationSqlInstance." -ErrorRecord $_ -Target $DestinationSqlInstance -Continue
            }

            # Check if the secondary database needs tobe initialized
            if (-not $NoInitialization) {
                # Check if the secondary database exists on the secondary instance
                if ($DestiationServer.Databases.Name -notcontains $SecondaryDatabase) {
                    # Check if force is being used and no option to generate the full backup is set
                    if ($Force -and -not ($GenerateFullBackup -or $UseExistingFullBackup)) {
                        # Set the option to generate a full backup
                        Write-Message -Message "Set option to initialize secondary database with full backup" -Level Verbose
                        $GenerateFullBackup = $true
                    }
                    elseif (-not $Force -and -not $GenerateFullBackup -and -not $UseExistingFullBackup -and -not $UseBackupFolder) {
                        # Set up the confirm part
                        $message = "The database $SecondaryDatabase does not exist on instance $DestinationSqlInstance. `nDo you want to initialize it by generating a full backup?"
                        $choiceYes = New-Object System.Management.Automation.Host.ChoiceDescription "&Yes", "Answer Yes."
                        $choiceNo = New-Object System.Management.Automation.Host.ChoiceDescription "&No", "Answer No."
                        $options = [System.Management.Automation.Host.ChoiceDescription[]]($choiceYes, $choiceNo)
                        $result = $host.ui.PromptForChoice($title, $message, $options, 0)

                        # Check the result from the confirm
                        switch ($result) {
                            # If yes
                            0 {
                                # Set the option to generate a full backup
                                Write-Message -Message "Set option to initialize secondary database with full backup." -Level Verbose
                                $GenerateFullBackup = $true
                            }
                            1 {
                                Stop-Function -Message "The database is not initialized on the secondary instance. `nPlease initialize the database on the secondary instance, use -GenerateFullbackup or use -Force." -Target $DestinationSqlInstance
                                return
                            }
                        } # switch
                    }
                }
            }


            # Check the parameters for initialization of the secondary database
            if (-not $NoInitialization -and ($GenerateFullBackup -or $UseExistingFullBackup -or $UseBackupFolder)) {
                # Check if the restore data and log folder are set
                if (-not $RestoreDataFolder -or -not $RestoreLogFolder) {
                    Write-Message -Message "Restore data folder or restore log folder are not set. Using server defaults" -Level Verbose

                    # Get the default data folder
                    if (-not $RestoreDataFolder) {
                        $DatabaseRestoreDataFolder = $DestinationServer.DefaultFile
                    }
                    else {
                        # Set the restore data folder
                        if ($RestoreDataFolder.EndsWith("\")) {
                            $DatabaseRestoreDataFolder = "$RestoreDataFolder$($db.Name)"
                        }
                        else {
                            $DatabaseRestoreDataFolder = "$RestoreDataFolder\$($db.Name)"
                        }
                    }

                    Write-Message -Message "Restore data folder set to $DatabaseRestoreDataFolder" -Level Verbose

                    # Get the default log folder
                    if (-not $RestoreLogFolder) {
                        $DatabaseRestoreLogFolder = $DestinationServer.DefaultLog
                    }

                    Write-Message -Message "Restore log folder set to $DatabaseRestoreLogFolder" -Level Verbose

                    # Check if the restore data folder exists
                    Write-Message -Message "Testing database restore data path $DatabaseRestoreDataFolder" -Level Verbose
                    if ((Test-DbaSqlPath  -Path $DatabaseRestoreDataFolder -SqlInstance $DestinationSqlInstance -SqlCredential $DestinationCredential) -ne $true) {
                        if ($PSCmdlet.ShouldProcess($DestinationServerName, "Creating database restore data folder $DatabaseRestoreDataFolder on $DestinationServerName")) {
                            # Try creating the data folder
                            try {
                                Invoke-Command2 -Credential $DestinationCredential -ScriptBlock {
                                    Write-Message -Message "Creating data folder $DatabaseRestoreDataFolder" -Level Verbose
                                    New-Item -Path $DatabaseRestoreDataFolder -ItemType Directory -Credential $DestinationCredential -Force:$Force | Out-Null
                                }
                            }
                            catch {
                                Stop-Function -Message "Something went wrong creating the restore data directory" -ErrorRecord $_ -Target $SourceSqlInstance -Continue
                            }
                        }
                    }

                    # Check if the restore log folder exists
                    Write-Message -Message "Testing database restore log path $DatabaseRestoreLogFolder" -Level Verbose
                    if ((Test-DbaSqlPath  -Path $DatabaseRestoreLogFolder -SqlInstance $DestinationSqlInstance -SqlCredential $DestinationCredential) -ne $true) {
                        if ($PSCmdlet.ShouldProcess($DestinationServerName, "Creating database restore log folder $DatabaseRestoreLogFolder on $DestinationServerName")) {
                            # Try creating the log folder
                            try {
                                Write-Message -Message "Restore log folder $DatabaseRestoreLogFolder not found. Trying to create it.." -Level Verbose

                                Invoke-Command2 -Credential $DestinationCredential -ScriptBlock {
                                    Write-Message -Message "Restore log folder $DatabaseRestoreLogFolder not found. Trying to create it.." -Level Verbose
                                    New-Item -Path $DatabaseRestoreLogFolder -ItemType Directory -Credential $DestinationCredential -Force:$Force | Out-Null
                                }
                            }
                            catch {
                                Stop-Function -Message "Something went wrong creating the restore log directory" -ErrorRecord $_ -Target $SourceSqlInstance -Continue
                            }
                        }
                    }
                }

                # Chech if the full backup patk can be reached
                if ($FullBackupPath) {
                    Write-Message -Message "Testing full backup path $FullBackupPath" -Level Verbose
                    if ((Test-DbaSqlPath -Path $FullBackupPath -SqlInstance $DestinationSqlInstance -SqlCredential $DestinationCredential) -ne $true) {
                        Stop-Function -Message ("The path to the full backup could not be reached. Check the path and/or the crdential") -ErrorRecord $_ -Target $DestinationSqlInstance -Continue
                    }
                }
                elseif ($UseBackupFolder.Length -ge 1) {
                    Write-Message -Message "Testing backup folder $UseBackupFolder" -Level Verbose
                    if ((Test-DbaSqlPath -Path $UseBackupFolder -SqlInstance $DestinationSqlInstance -SqlCredential $DestinationCredential) -ne $true) {
                        Stop-Function -Message ("The path to the backup folder could not be reached. Check the path and/or the crdential") -ErrorRecord $_ -Target $DestinationSqlInstance -Continue
                    }

                    $BackupPath = $UseBackupFolder
                }
                elseif ($UseExistingFullBackup) {
                    Write-Message -Message "No path to the full backup is set. Trying to retrieve the last full backup for $db from $SourceSqlInstance" -Level Verbose

                    # Get the last full backup
                    $LastBackup = Get-DbaBackupHistory -SqlServer $SourceSqlInstance -Databases $($db.Name) -LastFull -Credential $SourceSqlCredential

                    # Check if there was a last backup
                    if ($LastBackup -ne $null) {
                        # Test the path to the backup
                        Write-Message -Message "Testing last backup path $(($LastBackup[-1]).Path[-1])" -Level Verbose
                        if ((Test-DbaSqlPath -Path ($LastBackup[-1]).Path[-1] -SqlInstance $SourceSqlInstance -SqlCredential $SourceCredential) -ne $true) {
                            Stop-Function -Message "The full backup could not be found on $($LastBackup.Path). Check path and/or credentials" -ErrorRecord $_ -Target $DestinationSqlInstance -Continue
                        }
                        # Check if the source for the last full backup is remote and the backup is on a shared location
                        elseif (($LastBackup.Computername -ne $SourceServerName) -and (($LastBackup[-1]).Path[-1].StartsWith('\\') -eq $false)) {
                            Stop-Function -Message "The last full backup is not located on shared location. `n$($_.Exception.Message)" -ErrorRecord $_ -Target $DestinationSqlInstance -Continue
                        }
                        else {
                            #$FullBackupPath = $LastBackup.Path
                            $BackupPath = $LastBackup.Path
                            Write-Message -Message "Full backup found for $db. Path $BackupPath" -Level Verbose
                        }
                    }
                    else {
                        Write-Message -Message "No Full backup found for $db." -Level Output
                    }
                }
            }

            # Set the copy destination folder to include the database name
            if ($CopyDestinationFolder.EndsWith("\")) {
                $DatabaseCopyDestinationFolder = "$CopyDestinationFolder$($db.Name)"
            }
            else {
                $DatabaseCopyDestinationFolder = "$CopyDestinationFolder\$($db.Name)"
            }
            Write-Message -Message "Copy destination folder set to $DatabaseCopyDestinationFolder." -Level Verbose

            # Check if the copy job name is set
            if ($CopyJob) {
                $DatabaseCopyJob = "$CopyJob_$SourceServerName_$($db.Name)"
            }
            else {
                $DatabaseCopyJob = "LSCopy_$SourceServerName_$($db.Name)"
            }
            Write-Message -Message "Copy job name set to $DatabaseCopyJob" -Level Verbose

            # Check if the copy job schedule name is set
            if ($CopySchedule) {
                $DatabaseCopySchedule = "$CopySchedule_$($db.Name)"
            }
            else {
                $DatabaseCopySchedule = "LSCopySchedule_$($db.Name)"
                Write-Message -Message "Copy job schedule name set to $DatabaseCopySchedule" -Level Verbose
            }

            # Check if the copy destination folder exists
            Write-Message -Message "Testing database copy destination path $DatabaseCopyDestinationFolder" -Level Verbose
            if ((Test-DbaSqlPath -Path $DatabaseCopyDestinationFolder -SqlInstance $DestinationSqlInstance -SqlCredential $DestinationCredential) -ne $true) {
                if ($PSCmdlet.ShouldProcess($DestinationServerName, "Creating copy destination folder on $DestinationServerName")) {
                    try {
                        Invoke-Command2 -Credential $DestinationCredential -ScriptBlock {
                            Write-Message -Message "Copy destination folder $DatabaseCopyDestinationFolder not found. Trying to create it.. ." -Level Verbose
                            New-Item -Path $DatabaseCopyDestinationFolder -ItemType Directory -Credential $DestinationCredential -Force:$Force | Out-Null
                        }
                    }
                    catch {
                        Stop-Function -Message "Something went wrong creating the database copy destination folder. `n$($_.Exception.Message)" -ErrorRecord $_ -Target $DestinationServerName -Continue
                    }
                }
            }

            # Check if the restore job name is set
            if ($RestoreJob) {
                $DatabaseRestoreJob = "$RestoreJob_$SourceServerName_$($db.Name)"
            }
            else {
                $DatabaseRestoreJob = "LSRestore_$DestinationServerName_$($db.Name)"
            }
            Write-Message -Message "Restore job name set to $DatabaseRestoreJob" -Level Verbose

            # Check if the restore job schedule name is set
            if ($RestoreSchedule) {
                $DatabaseRestoreSchedule = "$RestoreSchedule_$($db.Name)"
            }
            else {
                $DatabaseRestoreSchedule = "LSRestoreSchedule_$($db.Name)"
            }
            Write-Message -Message "Restore job schedule name set to $DatabaseRestoreSchedule" -Level Verbose

            # If the database needs to be backed up first
            if ($GenerateFullBackup) {
                if ($PSCmdlet.ShouldProcess($SourceSqlInstance, "Backing up database $db")) {

                    Write-Message -Message "Generating full backup." -Level Output
                    Write-Message -Message "Backing up database $db to $DatabaseBackupNetworkPath" -Level Output

                    try {
                        $Timestamp = Get-Date -format "yyyyMMddHHmmss"

                        $LastBackup = Backup-DbaDatabase -SqlInstance $SourceSqlInstance `
                            -SqlCredential $SourceSqlCredential `
                            -BackupDirectory $DatabaseBackupNetworkPath `
                            -BackupFileName "FullBackup_$($db.Name)_PreLogShipping_$Timestamp.bak" `
                            -Databases $($db.Name) `
                            -Type Full

                        Write-Message -Message "Backup completed." -Level Output

                        # Get the last full backup path
                        #$FullBackupPath = $LastBackup.BackupPath
                        $BackupPath = $LastBackup.BackupPath

                        Write-Message -Message "Backup is located at $BackupPath" -Level Verbose
                    }
                    catch {
                        Stop-Function -Message "Something went wrong generating the full backup" -ErrorRecord $_ -Target $DestinationServerName -Continue
                    }
                }
            }

            # Check of the MonitorServerSecurityMode value is of type string and set the integer value
            if ($PrimaryMonitorServerSecurityMode -notin 0, 1) {
                $PrimaryMonitorServerSecurityMode = switch ($PrimaryMonitorServerSecurityMode) {
                    "SQLSERVER" { 0 } "WINDOWS" { 1 } default { 1 }
                }
            }

            # Check the primary monitor server
            if ($Force -and (-not$PrimaryMonitorServer -or [string]$PrimaryMonitorServer -eq '' -or $PrimaryMonitorServer -eq $null)) {
                Write-Message -Message "Setting monitor server for primary server to $SourceSqlInstance." -Level Output
                $PrimaryMonitorServer = $SourceSqlInstance
            }

            # Check the PrimaryMonitorServerSecurityMode if it's SQL Server authentication
            if ($PrimaryMonitorServerSecurityMode -eq 0) {
                if ($PrimaryMonitorServerLogin) {
                    Stop-Function -Message "The PrimaryMonitorServerLogin cannot be empty when using SQL Server authentication." -Target $SourceSqlInstance -Continue
                }

                if ($PrimaryMonitorServerPassword) {
                    Stop-Function -Message "The PrimaryMonitorServerPassword cannot be empty when using SQL Server authentication." -Target $ -Continue
                }
            }

            # Check of the SecondaryMonitorServerSecurityMode value is of type string and set the integer value
            if ($SecondaryMonitorServerSecurityMode -notin 0, 1) {
                $SecondaryMonitorServerSecurityMode = switch ($SecondaryMonitorServerSecurityMode) {
                    "SQLSERVER" { 0 } "WINDOWS" { 1 } default { 1 }
                }
            }

            # Check the secondary monitor server
            if ($Force -and (-not $SecondaryMonitorServer -or [string]$SecondaryMonitorServer -eq '' -or $SecondaryMonitorServer -eq $null)) {
                Write-Message -Message "Setting secondary monitor server for $DestinationSqlInstance to $SourceSqlInstance." -Level Verbose
                $SecondaryMonitorServer = $SourceSqlInstance
            }

            # Check the MonitorServerSecurityMode if it's SQL Server authentication
            if ($SecondaryMonitorServerSecurityMode -eq 0) {
                if ($SecondaryMonitorServerLogin) {
                    Stop-Function -Message "The SecondaryMonitorServerLogin cannot be empty when using SQL Server authentication." -Target $SourceSqlInstance -Continue
                }

                if ($SecondaryMonitorServerPassword) {
                    Stop-Function -Message "The SecondaryMonitorServerPassword cannot be empty when using SQL Server authentication." -Target $SourceSqlInstance -Continue
                }
            }

            # Now that all the checks have been done we can start with the fun stuff !

            # Restore the full backup
            if ($PSCmdlet.ShouldProcess($DestinationSqlInstance, "Restoring database $db to $SecondaryDatabase on $DestinationSqlInstance")) {
                if ($GenerateFullBackup -or $UseExistingFullBackup -or $UseBackupFolder) {
                    try {
                        Write-Message -Message "Start database restore" -Level Output
                        if ($NoRecovery -or (-not $Standby)) {
                            if ($Force) {
                                Restore-DbaDatabase -SqlServer $DestinationSqlInstance `
                                    -SqlCredential $DestinationSqlCredential `
                                    -Path $BackupPath `
                                    -DestinationFilePrefix $SecondaryDatabasePrefix `
                                    -DestinationFileSuffix $SecondaryDatabaseSuffix `
                                    -DestinationDataDirectory $DatabaseRestoreDataFolder `
                                    -DestinationLogDirectory $DatabaseRestoreLogFolder `
                                    -DatabaseName $SecondaryDatabase `
                                    -DirectoryRecurse `
                                    -NoRecovery `
                                    -WithReplace | Out-Null
                            }
                            else {
                                Restore-DbaDatabase -SqlServer $DestinationSqlInstance `
                                    -SqlCredential $DestinationSqlCredential `
                                    -Path $BackupPath `
                                    -DestinationFilePrefix $SecondaryDatabasePrefix `
                                    -DestinationFileSuffix $SecondaryDatabaseSuffix `
                                    -DestinationDataDirectory $DatabaseRestoreDataFolder `
                                    -DestinationLogDirectory $DatabaseRestoreLogFolder `
                                    -DatabaseName $SecondaryDatabase `
                                    -DirectoryRecurse `
                                    -NoRecovery | Out-Null
                            }
                        }

                        # If the database needs to be in standby
                        if ($Standby) {
                            # Setup the path to the standby file
                            $StandbyDirectory = "$DatabaseCopyDestinationFolder"

                            # Check if credentials need to be used
                            if ($DestinationSqlCredential) {
                                Restore-DbaDatabase -ServerInstance $DestinationSqlInstance `
                                    -SqlCredential $DestinationSqlCredential `
                                    -Path $BackupPath `
                                    -DestinationFilePrefix $SecondaryDatabasePrefix `
                                    -DestinationFileSuffix $SecondaryDatabaseSuffix `
                                    -DestinationDataDirectory $DatabaseRestoreDataFolder `
                                    -DestinationLogDirectory $DatabaseRestoreLogFolder `
                                    -DatabaseName $SecondaryDatabase `
                                    -DirectoryRecurse `
                                    -StandbyDirectory $StandbyDirectory
                            }
                            else {
                                Restore-DbaDatabase -ServerInstance $DestinationSqlInstance `
                                    -Path $BackupPath `
                                    -DestinationFilePrefix $SecondaryDatabasePrefix `
                                    -DestinationFileSuffix $SecondaryDatabaseSuffix `
                                    -DestinationDataDirectory $DatabaseRestoreDataFolder `
                                    -DestinationLogDirectory $DatabaseRestoreLogFolder `
                                    -DatabaseName $SecondaryDatabase `
                                    -DirectoryRecurse `
                                    -StandbyDirectory $StandbyDirectory
                            }
                        }
                    }
                    catch {
                        Stop-Function -Message "Something went wrong restoring the secondary database" -ErrorRecord $_ -Target $SourceSqlInstance -Continue
                    }

                    Write-Message -Message "Restore completed." -Level Output
                }
            }

            #region Set up log shipping on the primary instance
            # Set up log shipping on the primary instance
            if ($PSCmdlet.ShouldProcess($SourceSqlInstance, "Configuring logshipping for primary database $db on $SourceSqlInstance")) {
                try {

                    Write-Message -Message "Configuring logshipping for primary database" -Level Output

                    New-DbaLogShippingPrimaryDatabase -SqlInstance $SourceSqlInstance `
                        -SqlCredential $SourceSqlCredential `
                        -Database $($db.Name) `
                        -BackupDirectory $DatabaseBackupLocalPath `
                        -BackupJob $DatabaseBackupJob `
                        -BackupRetention $BackupRetention `
                        -BackupShare $DatabaseBackupNetworkPath `
                        -BackupThreshold $BackupThreshold `
                        -CompressBackup:$BackupCompression `
                        -HistoryRetention $HistoryRetention `
                        -MonitorServer $PrimaryMonitorServer `
                        -MonitorServerSecurityMode $PrimaryMonitorServerSecurityMode `
                        -MonitorCredential $PrimaryMonitorCredential `
                        -ThresholdAlertEnabled:$PrimaryThresholdAlertEnabled `
                        -Force:$Force

                    # Check if the backup job needs to be enabled or disabled
                    if ($BackupScheduleDisabled) {
                        Set-DbaAgentJob -SqlInstance $SourceSqlInstance -SqlCredential $SourceSqlCredential -Job $DatabaseBackupJob -Disabled
                        Write-Message -Message "Disabling backup job $DatabaseBackupJob" -Level Output
                    }
                    else {
                        Set-DbaAgentJob -SqlInstance $SourceSqlInstance -SqlCredential $SourceSqlCredential -Job $DatabaseBackupJob -Enabled
                        Write-Message -Message "Enabling backup job $DatabaseBackupJob" -Level Output
                    }

                    Write-Message -Message "Create backup job schedule $DatabaseBackupSchedule" -Level Output

                    $BackupJobSchedule = New-DbaAgentSchedule -SqlInstance $SourceSqlInstance `
                        -SqlCredential $SourceSqlCredential `
                        -Job $DatabaseBackupJob `
                        -Schedule $DatabaseBackupSchedule `
                        -FrequencyType $BackupScheduleFrequencyType `
                        -FrequencyInterval $BackupScheduleFrequencyInterval `
                        -FrequencySubdayType $BackupScheduleFrequencySubdayType `
                        -FrequencySubdayInterval $BackupScheduleFrequencySubdayInterval `
                        -FrequencyRelativeInterval $BackupScheduleFrequencyRelativeInterval `
                        -FrequencyRecurrenceFactor $BackupScheduleFrequencyRecurrenceFactor `
                        -StartDate $BackupScheduleStartDate `
                        -EndDate $BackupScheduleEndDate `
                        -StartTime $BackupScheduleStartTime `
                        -EndTime $BackupScheduleEndTime `
                        -Force:$Force

                    Write-Message -Message "Configuring logshipping from primary to secondary database." -Level Output

                    New-DbaLogShippingPrimarySecondary -SqlInstance $SourceSqlInstance `
                        -SqlCredential $SourceSqlCredential `
                        -PrimaryDatabase $($db.Name) `
                        -SecondaryDatabase $SecondaryDatabase `
                        -SecondaryServer $DestinationSqlInstance `
                        -SecondarySqlCredential $DestinationSqlCredential
                }
                catch {
                    Stop-Function -Message "Something went wrong setting up log shipping for primary instance" -ErrorRecord $_ -Target $SourceSqlInstance -Continue
                }
            }
            #endregion Set up log shipping on the primary instance

            #region Set up log shipping on the secondary instance
            # Set up log shipping on the secondary instance
            if ($PSCmdlet.ShouldProcess($DestinationSqlInstance, "Configuring logshipping for secondary database $SecondaryDatabase on $DestinationSqlInstance")) {
                try {

                    Write-Message -Message "Configuring logshipping from secondary database $SecondaryDatabase to primary database $db." -Level Output

                    New-DbaLogShippingSecondaryPrimary -SqlInstance $DestinationSqlInstance `
                        -SqlCredential $DestinationSqlCredential `
                        -BackupSourceDirectory $DatabaseBackupNetworkPath `
                        -BackupDestinationDirectory $DatabaseCopyDestinationFolder `
                        -CopyJob $DatabaseCopyJob `
                        -FileRetentionPeriod $BackupRetention `
                        -MonitorServer $SecondaryMonitorServer `
                        -MonitorServerSecurityMode $SecondaryMonitorServerSecurityMode `
                        -MonitorCredential $SecondaryMonitorCredential `
                        -PrimaryServer $SourceSqlInstance `
                        -PrimaryDatabase $($db.Name) `
                        -RestoreJob $DatabaseRestoreJob `
                        -Force:$Force

                    Write-Message -Message "Create copy job schedule $DatabaseCopySchedule" -Level Output

                    $CopyJobSchedule = New-DbaAgentSchedule -SqlInstance $DestinationSqlInstance `
                        -SqlCredential $DestinationSqlCredential `
                        -Job $DatabaseCopyJob `
                        -Schedule $DatabaseCopySchedule `
                        -FrequencyType $CopyScheduleFrequencyType `
                        -FrequencyInterval $CopyScheduleFrequencyInterval `
                        -FrequencySubdayType $CopyScheduleFrequencySubdayType `
                        -FrequencySubdayInterval $CopyScheduleFrequencySubdayInterval `
                        -FrequencyRelativeInterval $CopyScheduleFrequencyRelativeInterval `
                        -FrequencyRecurrenceFactor $CopyScheduleFrequencyRecurrenceFactor `
                        -StartDate $CopyScheduleStartDate `
                        -EndDate $CopyScheduleEndDate `
                        -StartTime $CopyScheduleStartTime `
                        -EndTime $CopyScheduleEndTime `
                        -Force:$Force

                    Write-Message -Message "Create restore job schedule $DatabaseRestoreSchedule" -Level Output

                    $RestoreJobSchedule = New-DbaAgentSchedule -SqlInstance $DestinationSqlInstance `
                        -SqlCredential $DestinationSqlCredential `
                        -Job $DatabaseRestoreJob `
                        -Schedule $DatabaseRestoreSchedule `
                        -FrequencyType $RestoreScheduleFrequencyType `
                        -FrequencyInterval $RestoreScheduleFrequencyInterval `
                        -FrequencySubdayType $RestoreScheduleFrequencySubdayType `
                        -FrequencySubdayInterval $RestoreScheduleFrequencySubdayInterval `
                        -FrequencyRelativeInterval $RestoreScheduleFrequencyRelativeInterval `
                        -FrequencyRecurrenceFactor $RestoreScheduleFrequencyRecurrenceFactor `
                        -StartDate $RestoreScheduleStartDate `
                        -EndDate $RestoreScheduleEndDate `
                        -StartTime $RestoreScheduleStartTime `
                        -EndTime $RestoreScheduleEndTime `
                        -Force:$Force

                    Write-Message -Message "Configuring logshipping for secondary database." -Level Output

                    New-DbaLogShippingSecondaryDatabase -SqlInstance $DestinationSqlInstance `
                        -SqlCredential $DestinationSqlCredential `
                        -SecondaryDatabase $SecondaryDatabase `
                        -PrimaryServer $SourceSqlInstance `
                        -PrimaryDatabase $($db.Name) `
                        -RestoreDelay $RestoreDelay `
                        -RestoreMode $DatabaseStatus `
                        -DisconnectUsers:$DisconnectUsers `
                        -RestoreThreshold $RestoreThreshold `
                        -ThresholdAlertEnabled:$SecondaryThresholdAlertEnabled `
                        -HistoryRetention $HistoryRetention

                    # Check if the copy job needs to be enabled or disabled
                    if ($CopyScheduleDisabled) {
                        Set-DbaAgentJob -SqlInstance $DestinationSqlInstance -SqlCredential $DestinationSqlCredential -Job $DatabaseCopyJob -Disabled
                    }
                    else {
                        Set-DbaAgentJob -SqlInstance $DestinationSqlInstance -SqlCredential $DestinationSqlCredential -Job $DatabaseCopyJob -Enabled
                    }

                    # Check if the restore job needs to be enabled or disabled
                    if ($RestoreScheduleDisabled) {
                        Set-DbaAgentJob -SqlInstance $DestinationSqlInstance -SqlCredential $DestinationSqlCredential -Job $DatabaseRestoreJob -Disabled
                    }
                    else {
                        Set-DbaAgentJob -SqlInstance $DestinationSqlInstance -SqlCredential $DestinationSqlCredential -Job $DatabaseRestoreJob -Enabled
                    }

                }
                catch {
                    Stop-Function -Message "Something went wrong setting up log shipping for secondary instance.`n$($_.Exception.Message)" -ErrorRecord $_ -Target $DestinationSqlInstance -Continue
                }
            }
            #endregion Set up log shipping on the secondary instance

            Write-Message -Message "Completed configuring log shipping for database $db" -Level Output

        } # for each database
    } # end process

    end {
        Write-Message -Message "Finished setting up log shipping." -Level Verbose
    }
}