icinga-powershell-plugins

1.8.0

provider/enums/Icinga_ProviderEnums.psm1

                                
<##################################################################################################

################# /lib/provider/bios ##############################################################

##################################################################################################>

[hashtable]$BiosCharacteristics = @{

    0  = 'Reserved'; 

    1  = 'Reserved'; 

    2  = 'Unknown';

    3  = 'BIOS Characteristics Not Supported';

    4  = 'ISA is supported';

    5  = 'MCA is supported';

    6  = 'EISA is supported';

    7  = 'PCI is supported';

    8  = 'PC Card (PCMCIA) is supported';

    9  = 'Plug and Play is supported';

    10 = 'APM is supported';

    11 = 'BIOS is Upgradeable (Flash)';

    12 = 'BIOS shadowing is allowed';

    13 = 'VL-VESA is supported';

    14 = 'ESCD support is available';

    15 = 'Boot from CD is supported';

    16 = 'Selectable Boot is supported';

    17 = 'BIOS ROM is socketed';

    18 = 'Boot From PC Card (PCMCIA) is supported';

    19 = 'EDD (Enhanced Disk Drive) Specification is supported';

    20 = 'Int 13h - Japanese Floppy for NEC 9800 1.2mb (3.5, 1k Bytes/Sector, 360 RPM) is supported';

    21 = 'Int 13h - Japanese Floppy for Toshiba 1.2mb (3.5, 360 RPM) is supported';

    22 = 'Int 13h - 5.25 / 360 KB Floppy Services are supported';

    23 = 'Int 13h - 5.25 /1.2MB Floppy Services are supported';

    24 = 'Int 13h - 3.5 / 720 KB Floppy Services are supported';

    25 = 'Int 13h - 3.5 / 2.88 MB Floppy Services are supported';

    26 = 'Int 5h, Print Screen Service is supported';

    27 = 'Int 9h, 8042 Keyboard services are supported';

    28 = 'Int 14h, Serial Services are supported';

    29 = 'Int 17h, printer services are supported';

    30 = 'Int 10h, CGA/Mono Video Services are supported';

    31 = 'NEC PC-98';

    32 = 'ACPI is supported';

    33 = 'USB Legacy is supported';

    34 = 'AGP is supported';

    35 = 'I2O boot is supported';

    36 = 'LS-120 boot is supported';

    37 = 'ATAPI ZIP Drive boot is supported';

    38 = '1394 boot is supported';

    39 = 'Smart Battery is supported';

    40 = 'Reserved for BIOS vendor';

    41 = 'Reserved for BIOS vendor';

    42 = 'Reserved for BIOS vendor';

    43 = 'Reserved for BIOS vendor';

    44 = 'Reserved for BIOS vendor';

    45 = 'Reserved for BIOS vendor';

    46 = 'Reserved for BIOS vendor';

    47 = 'Reserved for BIOS vendor';

    48 = 'Reserved for system vendor';

    49 = 'Reserved for system vendor';

    50 = 'Reserved for system vendor';

    51 = 'Reserved for system vendor';

    52 = 'Reserved for system vendor';

    53 = 'Reserved for system vendor';

    54 = 'Reserved for system vendor';

    55 = 'Reserved for system vendor';

    56 = 'Reserved for system vendor';

    57 = 'Reserved for system vendor';

    58 = 'Reserved for system vendor';

    59 = 'Reserved for system vendor';

    60 = 'Reserved for system vendor';

    61 = 'Reserved for system vendor';

    62 = 'Reserved for system vendor';

    63 = 'Reserved for system vendor'

}

<##################################################################################################

################# /lib/provider/disks #############################################################

##################################################################################################>

[hashtable]$DiskCapabilities = @{

    0  = 'Unknown';

    1  = 'Other';

    2  = 'Sequential Access';

    3  = 'Random Access';

    4  = 'Supports Writing';

    5  = 'Encryption';

    6  = 'Compression';

    7  = 'Supports Removeable Media';

    8  = 'Manual Cleaning';

    9  = 'Automatic Cleaning';

    10 = 'SMART Notification';

    11 = 'Supports Dual Sided Media';

    12 = 'Predismount Eject Not Required';

}

# https://docs.microsoft.com/en-us/previous-versions/windows/desktop/stormgmt/msft-disk

[hashtable]$DiskBusType = @{

    0  = 'Unknown';

    1  = 'SCSI';

    2  = 'ATAPI';

    3  = 'ATA';

    4  = '1394';

    5  = 'SSA';

    6  = 'Fibre Channel';

    7  = 'USB';

    8  = 'RAID';

    9  = 'iSCSI';

    10 = 'SAS';

    11 = 'SATA';

    12 = 'SD';

    13 = 'MMC';

    14 = 'Virtual';

    15 = 'File Backed Virtual';

    16 = 'Storage Spaces';

    17 = 'NVMe';

}

# https://docs.microsoft.com/en-us/previous-versions/windows/desktop/stormgmt/msft-disk

[hashtable]$DiskOperationalStatus = @{

    0      = 'Unknown';

    1      = 'Other';

    2      = 'OK';

    3      = 'Degraded';

    4      = 'Stressed';

    5      = 'Predictive Failure';

    6      = 'Error';

    7      = 'Non-Recoverable Error';

    8      = 'Starting';

    9      = 'Stopping';

    10     = 'Stopped';

    11     = 'In Service';

    12     = 'No Contact';

    13     = 'Lost Communication';

    14     = 'Aborted';

    15     = 'Dormant';

    16     = 'Supporting Entity in Error';

    17     = 'Completed';

    0xD010 = 'Online';

    0xD011 = 'Not Ready';

    0xD012 = 'No Media';

    0xD013 = 'Offline';

    0xD014 = 'Failed';

}

# https://docs.microsoft.com/en-us/previous-versions/windows/desktop/stormgmt/msft-disk

[hashtable]$DiskOperationalStatusName = @{

    'Unknown'                    = 0;

    'Other'                      = 1;

    'OK'                         = 2;

    'Degraded'                   = 3;

    'Stressed'                   = 4;

    'Predictive Failure'         = 5;

    'Error'                      = 6;

    'Non-Recoverable Error'      = 7;

    'Starting'                   = 8;

    'Stopping'                   = 9;

    'Stopped'                    = 10;

    'In Service'                 = 11;

    'No Contact'                 = 12;

    'Lost Communication'         = 13;

    'Aborted'                    = 14;

    'Dormant'                    = 15;

    'Supporting Entity in Error' = 16;

    'Completed'                  = 17;

    'Online'                     = 0xD010;

    'Not Ready'                  = 0xD011;

    'No Media'                   = 0xD012;

    'Offline'                    = 0xD013;

    'Failed'                     = 0xD014;

}

<#################################################################################################

################### /lib/provider/Networkdevices #################################################

#################################################################################################>

[hashtable]$InterfaceAdminStatus = @{

    1 = 'Up';

    2 = 'Down';

    3 = 'Testing';

}

[hashtable]$InterfaceAdminStatusName = @{

    'Up'      = 1;

    'Down'    = 2;

    'Testing' = 3;

}

[hashtable]$InterfaceOperationalStatus = @{

    1 = 'Up';

    2 = 'Down';

    3 = 'Testing';

    4 = 'Unknown';

    5 = 'Dormant';

    6 = 'Not Present';

    7 = 'Lower layer down';

}

[hashtable]$InterfaceOperationalStatusName = @{

    'Up'             = 1;

    'Down'           = 2;

    'Testing'        = 3;

    'Unknown'        = 4;

    'Dormant'        = 5;

    'NotPresent'     = 6;

    'LowerLayerDown' = 7;

}

[hashtable]$NetConnectionStatus = @{

    0  = 'Disconnected';

    1  = 'Connecting';

    2  = 'Connected';

    3  = 'Disconnecting';

    4  = 'Hardware Not Present';

    5  = 'Hardware Disabled';

    6  = 'Hardware Malfunction';

    7  = 'Media Disconnected';

    8  = 'Authenticating';

    9  = 'Authentication Succeeded';

    10 = 'Authentication Failed';

    11 = 'Invalid Address';

    12 = 'Credentials Required';

    13 = 'Other';

}

[hashtable]$NetConnectionStatusName = @{

    'Disconnected'            = 0;

    'Connecting'              = 1;

    'Connected'               = 2;

    'Disconnecting'           = 3;

    'HardwareNotPresent'      = 4;

    'HardwareDisabled'        = 5;

    'HardwareMalfunction'     = 6;

    'MediaDisconnected'       = 7;

    'Authenticating'          = 8;

    'AuthenticationSucceeded' = 9;

    'AuthenticationFailed'    = 10;

    'InvalidAddress'          = 11;

    'CredentialsRequired'     = 12;

    'Other'                   = 12;

}

[hashtable]$LoadBalancingAlgorithm = @{

    0 = 'TransportPorts';

    2 = 'IPAddresses';

    3 = 'MacAddresses';

    4 = 'HyperVPort';

    5 = 'Dynamic';

}

[hashtable]$LoadBalancingAlgorithmName = @{

    'TransportPorts' = 0;

    'IPAddresses'    = 2;

    'MacAddresses'   = 3;

    'HyperVPort'     = 4;

    'Dynamic'        = 5;

}

[hashtable]$TeamingMode = @{

    0 = 'Static';

    1 = 'SwitchIndependent';

    2 = 'Lacp';

}

[hashtable]$TeamingModeName = @{

    'Static'            = 0;

    'SwitchIndependent' = 1;

    'Lacp'              = 2;

}

[hashtable]$InterfaceTeamStatus = @{

    0 = 'Up';

    1 = 'Down';

    2 = 'Degraded';

}

[hashtable]$InterfaceTeamStatusName = @{

    'Up'       = 0;

    'Down'     = 1;

    'Degraded' = 2;

}

[hashtable]$AdministrativeMode = @{

    0 = 'Active';

    1 = 'Standby';

}

[hashtable]$AdministrativeModeName = @{

    'Active'  = 0;

    'Standby' = 1;

}

[hashtable]$OperationalMode = @{

    0    = 'Active';

    1    = 'Standby';

    4096 = 'Failed';

}

[hashtable]$OperationalModeName = @{

    'Active'  = 0;

    'Standby' = 1;

    'Failed'  = 4096;

}

[hashtable]$SlaveEnabledState = @{

    0  = 'Unknown';

    1  = 'Other';

    2  = 'Enabled';

    3  = 'Disabled';

    4  = 'Shutting Down';

    5  = 'Not Applicable';

    6  = 'Enabled but Offline';

    7  = 'In Test';

    8  = 'Deferred';

    9  = 'Quiesce';

    10 = 'Starting';

}

[hashtable]$SlaveEnabledStateName = @{

    'Unknown'           = 0;

    'Other'             = 1;

    'Enabled'           = 2;

    'Disabled'          = 3;

    'ShuttingDown'      = 4;

    'NotApplicable'     = 5;

    'EnabledButOffline' = 6;

    'InTest'            = 7;

    'Deferred'          = 8;

    'Quiesce'           = 9;

    'Starting'          = 10;

}

<##################################################################################################

######################### /lib/provider/storage ###################################################

###################################################################################################>

[hashtable]$StorageHealthStatus = @{

    0 = 'Healthy';

    1 = 'Warning';

    2 = 'Unhealthy';

    5 = 'Unknown';

}

[hashtable]$StorageHealthStatusName = @{

    'Healthy'   = 0;

    'Warning'   = 1;

    'Unhealthy' = 2;

    'Unknown'   = 5;

}

[hashtable]$StorageOperationalStatus = @{

    0  = 'Unknown';

    1  = 'Other';

    2  = 'OK';

    3  = 'Degraded';

    4  = 'Stressed';

    5  = 'Predictive Failure';

    6  = 'Error';

    7  = 'Non-Recoverable Error';

    8  = 'Starting';

    9  = 'Stopping';

    10 = 'Stopped';

    11 = 'In Service';

    12 = 'No Contact';

    13 = 'Lost Communication';

    14 = 'Aborted';

    15 = 'Dormant';

    16 = 'Supporting Entity in Error';

    17 = 'Completed';

    18 = 'Power Mode';

    19 = 'Relocating';

}

[hashtable]$StorageOperationalStatusName = @{

    'Unknown'                    = 0;

    'Other'                      = 1;

    'OK'                         = 2;

    'Degraded'                   = 3;

    'Stressed'                   = 4;

    'Predictive Failure'         = 5;

    'Error'                      = 6;

    'Non-Recoverable Error'      = 7;

    'Starting'                   = 8;

    'Stopping'                   = 9;

    'Stopped'                    = 10;

    'In Service'                 = 11;

    'No Contact'                 = 12;

    'Lost Communication'         = 13;

    'Aborted'                    = 14;

    'Dormant'                    = 15;

    'Supporting Entity in Error' = 16;

    'Completed'                  = 17;

    'Power Mode'                 = 18;

    'Relocating'                 = 19;

}

[hashtable]$StoragePoolUsage = @{

    0 = 'Unknown';

    1 = 'Ohter';

    2 = 'Unrestricted';

    3 = 'Reserved for ComputerSystem (the block server';

    4 = 'Reserved as a Delta Replica Container';

    5 = 'Reserved for Migration Services';

    6 = 'Reserved for Local Replication Services';

    7 = 'Reserved for Remote Replication Services';

    8 = 'Reserved for Sparing';

}

[hashtable]$StoragePoolUsageName = @{

    'Unknown'                                        = 0;

    'Ohter'                                          = 1;

    'Unrestricted'                                   = 2;

    'Reserved for ComputerSystem (the block server)' = 3;

    'Reserved as a Delta Replica Container'          = 4;

    'Reserved for Migration Services'                = 5;

    'Reserved for Local Replication Services'        = 6;

    'Reserved for Remote Replication Services'       = 7;

    'Reserved for Sparing'                           = 8;

}

[hashtable]$RetireMissingPhysicalDisks = @{

    1 = 'Auto';

    2 = 'Always';

    3 = 'Never';

}

[hashtable]$RetireMissingPhysicalDisksName = @{

    'Auto'   = 1;

    'Always' = 2;

    'Never'  = 3;

}

[hashtable]$ThinProvisioningAlertThresholds = @{

    'MinValue' = 0;

    'MaxValue' = 100;

}

<##################################################################################################

################# /lib/provider/eventlog ###############################################################

##################################################################################################>

[hashtable]$EventLogSeverity = @{

    'Information'  = 4;

    'SuccessAudit' = -9214364837600034816;

    'Warning'      = 3;

    'Error'        = 2;

    'FailureAudit' = -9218868437227405312;

}

[hashtable]$EventLogSeverityName = @{

    4                    = 'Information';

    -9214364837600034816 = 'SuccessAudit';

    3                    = 'Warning';

    2                    = 'Error';

    -9218868437227405312 ='FailureAudit';

}

<##################################################################################################

################# /lib/provider/cpu ###############################################################

##################################################################################################>

[hashtable]$CPUArchitecture = @{

    0  = 'x86';

    1  = 'MIPS';

    2  = 'Alpha';

    3  = 'PowerPC';

    6  = 'ia64';

    9  = 'x64';

}

[hashtable]$CPUProcessorType = @{

    1  = 'Other';

    2  = 'Unknown';

    3  = 'Central Processor';

    4  = 'Math Processor';

    5  = 'DSP Processor';

    6  = 'Video Processor';

}

[hashtable]$CPUStatusInfo = @{

    1  = 'Other';

    2  = 'Unknown';

    3  = 'Enabled';

    4  = 'Disabled';

    5  = 'Not Applicable';

}

[hashtable]$CPUFamily = @{

    1  = 'Other';

    2  = 'Unknown';

    3  = '8086';

    4  = '80286';

    5  = '80386';

    6  = '80486';

    7  = '8087';

    8  = '80287';

    9  = '80387';

   10  = '80487';

   11  = 'Pentium(R) brand';

   12  = 'Pentium(R) Pro';

   13  = 'Pentium(R) II';

   14  = 'Pentium(R) processor with MMX(TM) technology';

   15  = 'Celeron(TM)';

   16  = 'Pentium(R) II Xeon(TM)';

   17  = 'Pentium(R) III';

   18  = 'M1 Family';

   19  = 'M2 Family';

   24  = 'K5 Family';

   25  = 'K6 Family';

   26  = 'K6-2';

   27  = 'K6-3';

   28  = 'AMD Athlon(TM) Processor Family';

   29  = 'AMD(R) Duron(TM) Processor';

   30  = 'AMD29000 Family';

   31  = 'K6-2+';

   32  = 'Power PC Family';

   33  = 'Power PC 601';

   34  = 'Power PC 603';

   35  = 'Power PC 603+';

   36  = 'Power PC 604';

   37  = 'Power PC 620';

   38  = 'Power PC X704';

   39  = 'Power PC 750';

   48  = 'Alpha Family';

   49  = 'Alpha 21064';

   50  = 'Alpha 21066';

   51  = 'Alpha 21164';

   52  = 'Alpha 21164PC';

   53  = 'Alpha 21164a';

   54  = 'Alpha 21264';

   55  = 'Alpha 21364';

   64  = 'MIPS Family';

   65  = 'MIPS R4000';

   66  = 'MIPS R4200';

   67  = 'MIPS R4400';

   68  = 'MIPS R4600';

   69  = 'MIPS R10000';

   80  = 'SPARC Family';

   81  = 'SuperSPARC';

   82  = 'microSPARC II';

   83  = 'microSPARC IIep';

   84  = 'UltraSPARC';

   85  = 'UltraSPARC II';

   86  = 'UltraSPARC IIi';

   87  = 'UltraSPARC III';

   88  = 'UltraSPARC IIIi';

   96  = ' 68040';

   97  = '68xxx Family';

   98  = '68000';

   99  = '68010';

  100  = '68020';

  101  = '68030';

  112  = 'Hobbit Family';

  120  = 'Crusoe(TM) TM5000 Family';

  121  = 'Crusoe(TM) TM3000 Family';

  122  = 'Efficeon(TM) TM8000 Family';

  128  = 'Weitek';

  130  = 'Itanium(TM) Processor';

  131  = 'AMD Athlon(TM) 64 Processor Family';

  132  = 'AMD Opteron(TM) Family';

  144  = 'PA-RISC Family';

  145  = 'PA-RISC 8500';

  146  = 'PA-RISC 8000';

  147  = 'PA-RISC 7300LC';

  148  = 'PA-RISC 7200';

  149  = 'PA-RISC 7100LC';

  150  = 'PA-RISC 7100';

  160  = 'V30 Family';

  176  = 'Pentium(R) III Xeon(TM)';

  177  = 'Pentium(R) III Processor with Intel(R) SpeedStep(TM) Technology';

  178  = 'Pentium(R) 4';

  179  = 'Intel(R) Xeon(TM)';

  180  = 'AS400 Family';

  181  = 'Intel(R) Xeon(TM) processor MP';

  182  = 'AMD AthlonXP(TM) Family';

  183  = 'AMD AthlonMP(TM) Family';

  184  = 'Intel(R) Itanium(R) 2';

  185  = 'Intel Pentium M Processor';

  190  = 'K7';

  200  = 'IBM390 Family';

  201  = 'G4';

  202  = 'G5';

  203  = 'G6';

  204  = 'z/Architecture base';

  250  = 'i860';

  251  = 'i960';

  260  = 'SH-3';

  261  = 'SH-4';

  280  = 'ARM';

  281  = 'StrongARM';

  300  = '6x86';

  301  = 'MediaGX';

  302  = 'MII';

  320  = 'WinChip';

  350  = 'DSP';

  500  = 'Video Processor';

}

[hashtable]$CPUConfigManagerErrorCode = @{

    0  = 'This device is working properly.';

    1  = 'This device is not configured correctly.';

    2  = 'Windows cannot load the driver for this device.';

    3  = 'The driver for this device might be corrupted, or your system may be running low on memory or other resources.';

    4  = 'This device is not working properly. One of its drivers or your registry might be corrupted.';

    5  = 'The driver for this device needs a resource that Windows cannot manage.';

    6  = 'The boot configuration for this device conflicts with other devices.';

    7  = 'Cannot filter.';

    8  = 'The driver loader for the device is missing.';

    9  = 'This device is not working properly because the controlling firmware is reporting the resources for the device incorrectly.';

    10 = 'This device cannot start.';

    11 = 'This device failed.';

    12 = 'This device cannot find enough free resources that it can use.';

    13 = "Windows cannot verify this device’s resources.";

    14 = 'This device cannot work properly until you restart your computer.';

    15 = 'This device is not working properly because there is probably a re-enumeration problem.';

    16 = 'Windows cannot identify all the resources this device uses.';

    17 = 'This device is asking for an unknown resource type.';

    18 = 'Reinstall the drivers for this device.';

    19 = 'Your registry might be corrupted.';

    20 = 'Failure using the VxD loader.';

    21 = 'System failure: Try changing the driver for this device. If that does not work, see your hardware documentation. Windows is removing this device.';

    22 = 'This device is disabled.';

    23 = "System failure: Try changing the driver for this device. If that doesn’t work, see your hardware documentation.";

    24 = "This device is not present, is not working properly, or does not have all its drivers installed.";

    25 = "Windows is still setting up this device.";

    26 = "Windows is still setting up this device.";

    27 = "This device does not have valid log configuration.";

    28 = "The drivers for this device are not installed.";

    29 = "This device is disabled because the firmware of the device did not give it the required resources.";

    30 = "This device is using an Interrupt Request (IRQ) resource that another device is using.";

    31 = 'This device is not working properly because Windows cannot load the drivers required for this device.';

}

[hashtable]$DeviceAvailabilityName = @{

    1  = 'Other';

    2  = 'Unknown';

    3  = 'Running/Full Power';

    4  = 'Warning';

    5  = 'In Test';

    6  = 'Not Applicable';

    7  = 'Power Off';

    8  = 'Off Line';

    9  = 'Off Duty';

    10 = 'Degraded';

    11 = 'Not Installed';

    12 = 'Install Error';

    13 = 'Power Save - Unknown';

    14 = 'Power Save - Low Power Mode';

    15 = 'Power Save - Standby';

    16 = 'Power Cycle';

    17 = 'Power Save - Warning';

    18 = 'Paused';

    19 = 'Not Ready';

    20 = 'Not Configured';

    21 = 'Quiesced';

}

[hashtable]$DeviceAvailability = @{

    'Other'                 = 1;

    'Unknown'               = 2;

    'RunningFullPower'      = 3;

    'Warning'               = 4;

    'InTest'                = 5;

    'NotApplicable'         = 6;

    'PowerOff'              = 7;

    'OffLine'               = 8;

    'OffDuty'               = 9;

    'Degraded'              = 10;

    'NotInstalled'          = 11;

    'InstallError'          = 12;

    'PowerSaveUnknown'      = 13;

    'PowerSaveLowPowerMode' = 14;

    'PowerSaveStandby'      = 15;

    'PowerCycle'            = 16;

    'PoweSaveWarning'       = 17;

    'Paused'                = 18;

    'NotReady'              = 19;

    'NotConfigured'         = 20;

    'Quiesced'              = 21;

}

[hashtable]$CPUAvailability = $DeviceAvailabilityName;

[hashtable]$CPUPowerManagementCapabilities = @{

    0  = 'Unknown';

    1  = 'Not Supported';

    2  = 'Disabled';

    3  = 'Enabled';

}

<##################################################################################################

################# /lib/provider/memory ############################################################

##################################################################################################>

[hashtable]$MemoryFormFactor = @{

    0  = 'Unknown';

    1  = 'Other';

    2  = 'SIP';

    3  = 'DIP';

    4  = 'ZIP';

    5  = 'SOJ';

    6  = 'Proprietary';

    7  = 'SIMM';

    8  = 'DIMM';

    9  = 'TSOP';

    10 = 'PGA';

    11 = 'RIMM';

    12 = 'SODIMM';

    13 = 'SRIMM';

    14 = 'SMD';

    15 = 'SSMP';

    16 = 'QFP';

    17 = 'TQFP';

    18 = 'SOIC';

    19 = 'LCC';

    20 = 'PLCC';

    21 = 'BGA';

    22 = 'FPBGA';

    23 = 'LGA';

}

[hashtable]$MemoryInterleavePosition = @{

    0  = 'Noninterleaved';

    1  = 'First position';

    2  = 'Second position';

}

[hashtable]$MemoryMemoryType = @{

    0  = 'Unknown';

    1  = 'Other';  

    2  = 'DRAM';

    3  = 'Synchronous DRAM';

    4  = 'Cache DRAM';

    5  = 'EDO';

    6  = 'EDRAM';

    7  = 'VRAM';

    8  = 'SRAM';

    9  = 'RAM';

    10 = 'ROM';

    11 = 'Flash';

    12 ='EEPROM';

    13 = 'FEPROM';

    14 = 'EPROM';

    15 = 'CDRAM';

    16 = '3DRAM';

    17 = 'SDRAM';

    18 = 'SGRAM';

    19 = 'RDRAM';

    20 = 'DDR';

    21 = 'DDR2';

    22 = 'DDR2 FB-DIMM';

    23 = 'DDR2—FB-DIMM,May not be available; see note above.';

    24 = 'DDR3—May not be available; see note above.';

    25 = 'FBD2';

}

[hashtable]$MemoryTypeDetail = @{

    1    = 'Reserved';

    2    = 'Other';

    4    = 'Unknown';

    8    = 'Fast-paged';

    16   = 'Static column';

    32   = 'Pseudo-static';

    64   = 'RAMBUS';

    128  = 'Synchronous';

    256  = 'CMOS';

    512  = 'EDO';

    1024 = 'Window DRAM';

    2048 = 'Cache DRAM';

    4096 = 'Non-volatile';

}

<##################################################################################################

################# /lib/provider/Windows ###########################################################

##################################################################################################>

[hashtable]$WindowsOSProductSuite = @{

    1     = 'Microsoft Small Business Server was once installed, but may have been upgraded to another version of Windows.';

    2     = 'Windows Server 2008 Enterprise is installed.';

    4     = 'Windows BackOffice components are installed.';

    8     = 'Communication Server is installed.';

    16    = 'Terminal Services is installed.';

    32    = 'Microsoft Small Business Server is installed with the restrictive client license.';

    64    = 'Windows Embedded is installed.';

    128   = 'Datacenter edition is installed.';

    256   = 'Terminal Services is installed, but only one interactive session is supported.';

    512   = 'Windows Home Edition is installed.';

    1024  = 'Web Server Edition is installed.';

    8192  = 'Storage Server Edition is installed.';

    16384 = 'Compute Cluster Edition is installed.';

}

[hashtable]$WindowsProductType = @{

    1 = 'Work Station';

    2 = 'Domain Controller';

    3 = 'Server';

}

[hashtable]$WindowsOSType = @{

    0 = 'Unknown';

    1 = 'Other';

    2 = 'MACROS';

    3 = 'ATTUNIX';

    4 = 'DGUX';

    5 = 'DECNT';

    6 = 'Digital Unix';

    7 = 'OpenVMS'

    8 = 'HPUX';

    9 = 'AIX';

   10 = 'MVS';

   11 = 'OS400';

   12 = 'OS/2';

   13 = 'JavaVM';

   14 = 'MSDOS';

   15 = 'WIN3x';

   16 = 'WIN95';

   17 = 'WIN98';

   18 = 'WINNT';

   19 = 'WINCE';

   20 = 'NCR3000';

   21 = 'NetWare';

   22 = 'OSF';

   23 = 'DC/OS';

   24 = 'Reliant UNIX';

   25 = 'SCO UnixWare';

   26 = 'SCO OpenServer';

   27 = 'Sequent';

   28 = 'IRIX';

   29 = 'Solaris';

   30 = 'SunOS';

   31 = 'U6000';

   32 = 'ASERIES';

   33 = 'TandemNSK';

   34 = 'TandemNT';

   35 = 'BS2000';

   36 = 'LINUX';

   37 = 'Lynx';

   38 = 'XENIX';

   39 = 'VM/ESA';

   40 = 'Interactive UNIX';

   41 = 'BSDUNIX';

   42 = 'FreeBSD';

   43 = 'NetBSD';

   44 = 'GNU Hurd';

   45 = 'OS9';

   46 = 'MACH Kernel';

   47 = 'Inferno';

   48 = 'QNX';

   49 = 'EPOC';

   50 = 'IxWorks';

   51 = 'VxWorks';

   52 = 'MiNT';

   53 = 'BeOS';

   54 = 'HP MPE';

   55 = 'NextStep';

   56 = 'PalmPilot';

   57 = 'Rhapsody';

   58 = 'Windows 2000';

   59 = 'Dedicated';

   60 = 'OS/390';

   61 = 'VSE';

   62 = 'TPF';

}

<##################################################################################################

################# /lib/provider/Services ###########################################################

##################################################################################################>

[hashtable]$ServiceStatusName = @{

    1 = 'Stopped';

    2 = 'StartPending';

    3 = 'StopPending';

    4 = 'Running';

    5 = 'ContinuePending';

    6 = 'PausePending';

    7 = 'Paused';

}

[hashtable]$ServiceStatus = @{

    'Stopped'         = 1;

    'StartPending'    = 2;

    'StopPending'     = 3;

    'Running'         = 4;

    'ContinuePending' = 5;

    'PausePending'    = 6;

    'Paused'          = 7;

}

[hashtable]$ServiceStartupType = @{

    'Boot'      = 0;

    'System'    = 1;

    'Automatic' = 2;

    'Manual'    = 3;

    'Disabled'  = 4;

    'Unknown'   = 5; # Custom

}

[hashtable]$ServiceStartupTypeName = @{

    0 = 'Boot';

    1 = 'System';

    2 = 'Automatic';

    3 = 'Manual';

    4 = 'Disabled';

    5 = 'Unknown'; # Custom

}

[hashtable]$ServiceWmiStartupType = @{

    'Boot'     = 0;

    'System'   = 1;

    'Auto'     = 2;

    'Manual'   = 3;

    'Disabled' = 4;

    'Unknown'  = 5; # Custom

}

<##################################################################################################

################# /lib/provider/tasks #############################################################

##################################################################################################>

[hashtable]$ScheduledTaskStatus = @{

    'Unknown'  = 0;

    'Disabled' = 1;

    'Queued'   = 2;

    'Ready'    = 3;

    'Running'  = 4;

}

[hashtable]$ScheduledTaskName = @{

    0 = 'Unknown';

    1 = 'Disabled';

    2 = 'Queued';

    3 = 'Ready';

    4 = 'Running';

}

[hashtable]$TimeSyncStatus = @{

    'NoLeapWarning'       = 0;

    'PositiveLeapSecond'  = 1;

    'NegativeLeapSecond'  = 2;

    'ClockNotSynchronized' = 3;

}

[hashtable]$TimeSyncStatusName = @{

    0 = 'NoLeapWarning';

    1 = 'PositiveLeapSecond';

    2 = 'NegativeLeapSecond';

    3 = 'ClockNotSynchronized';

}

[hashtable]$ClientMode = @{

    'Reserved'                     = 0;

    'SymmetricActive'              = 1;

    'SymmetricPassive'             = 2;

    'Client'                       = 3;

    'Server'                       = 4;

    'Broadcast'                    = 5;

    'ReservedForNTPControlMessage' = 6;

    'ReservedForPrivateUse'        = 7;

}

[hashtable]$ClientModeName = @{

    0 = 'Reserved';

    1 = 'SymmetricActive';

    2 = 'SymmetricPassive';

    3 = 'Client';

    4 = 'Client';

    5 = 'Broadcast';

    6 = 'ReservedForNTPControlMessage';

    7 = 'ReservedForPrivateUse';

}

[hashtable]$Stratum = @{

    'UnspecifiedOrUnavailable' = 0;

    'PrimaryReference'         = 1;

}

[hashtable]$StratumTxt = @{

    0 = 'UnspecifiedOrUnavailable';

    1 = 'PrimaryReference';

}

[hashtable]$DeviceAccessName = @{

    0 = 'Unknown';

    1 = 'Readable';

    2 = 'Writeable';

    3 = 'Read/Write Supported';

    4 = 'Write Once';

}

[hashtable]$DeviceAccess = @{

    'Unknown'              = 0;

    'Readable'             = 1;

    'Writeable'            = 2;

    'Read/Write Supported' = 3;

    'Write Once'           = 4;

}

[hashtable]$DeviceStatus = @{

    'OK'         = 'OK';

    'Erorr'      = 'Error';

    'Degraded'   = 'Degraded';

    'Unknown'    = 'Unknown';

    'PredFail'   = 'PredFail';

    'Starting'   = 'Starting';

    'Stopping'   = 'Stopping';

    'Service'    = 'Service';

    'Stressed'   = 'Stressed';

    'NonRecover' = 'NonRecover';

    'NoContact'  = 'NoContact';

    'LostComm'   = 'LostComm';

}

[hashtable]$ProviderEnums = @{

    #/lib/provider/bios

    BiosCharacteristics             = $BiosCharacteristics;

    #/lib/provider/disks

    DiskCapabilities                = $DiskCapabilities;

    DiskBusType                     = $DiskBusType;

    DiskOperationalStatus           = $DiskOperationalStatus;

    DiskOperationalStatusName       = $DiskOperationalStatusName;

    DeviceAccess                    = $DeviceAccess;

    DeviceAccessName                = $DeviceAccessName;

    DeviceStatus                    = $DeviceStatus;

    DeviceAvailability              = $DeviceAvailability;

    DeviceAvailabilityName          = $DeviceAvailabilityName;

    #/lib/provider/storage

    StoragePoolUsage                = $StoragePoolUsage;

    StoragePoolUsageName            = $StoragePoolUsageName;

    StorageHealthStatus             = $StorageHealthStatus

    StorageHealthStatusName         = $StorageHealthStatusName

    StorageOperationalStatus        = $StorageOperationalStatus;

    StorageOperationalStatusName    = $StorageOperationalStatusName;

    RetireMissingPhysicalDisks      = $RetireMissingPhysicalDisks;

    RetireMissingPhysicalDisksName  = $RetireMissingPhysicalDisksName;

    ThinProvisioningAlertThresholds = $ThinProvisioningAlertThresholds;

    #/lib/provider/eventlog

    EventLogSeverity                = $EventLogSeverity;

    EventLogSeverityName            = $EventLogSeverityName;

    #/lib/provider/cpu

    CPUArchitecture                 = $CPUArchitecture;

    CPUProcessorType                = $CPUProcessorType;

    CPUStatusInfo                   = $CPUStatusInfo;

    CPUFamily                       = $CPUFamily;

    CPUConfigManagerErrorCode       = $CPUConfigManagerErrorCode;

    CPUAvailability                 = $CPUAvailability;

    CPUPowerManagementCapabilities  = $CPUPowerManagementCapabilities;

    #/lib/provider/memory

    MemoryFormFactor                = $MemoryFormFactor;

    MemoryInterleavePosition        = $MemoryInterleavePosition;

    MemoryMemoryType                = $MemoryMemoryType;

    MemoryTypeDetail                = $MemoryTypeDetail;

    #/lib/provider/windows

    WindowsOSProductSuite           = $WindowsOSProductSuite;

    WindowsProductType              = $WindowsProductType;

    WindowsOSType                   = $WindowsOSType;

    #/lib/provider/services

    ServiceStatus                   = $ServiceStatus;

    ServiceStatusName               = $ServiceStatusName;

    ServiceStartupType              = $ServiceStartupType;

    ServiceStartupTypeName          = $ServiceStartupTypeName;

    ServiceWmiStartupType           = $ServiceWmiStartupType;

    #/lib/provider/tasks

    ScheduledTaskStatus             = $ScheduledTaskStatus;

    ScheduledTaskName               = $ScheduledTaskName;

    #/lib/provider/NtpChecks

    TimeSyncStatus                  = $TimeSyncStatus;

    TimeSyncStatusName              = $TimeSyncStatusName;

    ClientMode                      = $ClientMode;

    ClientModeName                  = $ClientModeName;

    Stratum                         = $Stratum;

    StratumTxt                      = $StratumTxt;

    #/lib/provider/NetworkDevices

    OperationalMode                 = $OperationalMode;

    OperationalModeName             = $OperationalModeName;

    AdministrativeMode              = $AdministrativeMode;

    AdministrativeModeName          = $AdministrativeModeName;

    SlaveEnabledState               = $SlaveEnabledState;

    SlaveEnabledStateName           = $SlaveEnabledStateName;

    TeamingMode                     = $TeamingMode;

    TeamingModeName                 = $TeamingModeName;

    InterfaceTeamStatus             = $InterfaceTeamStatus;

    InterfaceTeamStatusName         = $InterfaceTeamStatusName;

    InterfaceAdminStatus            = $InterfaceAdminStatus;

    InterfaceAdminStatusName        = $InterfaceAdminStatusName;

    InterfaceOperationalStatus      = $InterfaceOperationalStatus;

    InterfaceOperationalStatusName  = $InterfaceOperationalStatusName;

    NetConnectionStatus             = $NetConnectionStatus;

    NetConnectionStatusName         = $NetConnectionStatusName;

    LoadBalancingAlgorithm          = $LoadBalancingAlgorithm;

    LoadBalancingAlgorithmName      = $LoadBalancingAlgorithmName;

}

Export-ModuleMember -Variable @('ProviderEnums');