vFunctions.psm1
|
using module .\vClass.psm1 <# .SYNOPSIS Finds VM associated with an IP .DESCRIPTION Queries all VMs for submitted IP address(es), returning an object of Name and IP. In large envrionments it could take a minute to run. Submit all IPs at once for better performance. .PARAMETER IP Valid IPv4 or IPv6 address(es). Invalid submission will throw an exception. .OUTPUTS [pscustomobject] SupSkiFun.VMIPInfo .EXAMPLE Return VM with associated IP: Find-VMByIP -IP 172.16.15.14 .EXAMPLE Return VMs with associated IPs, placing the object into a variable: $MyVar = Find-VMByIP -IP 10.9.8.7 , fe80::250:56ff:fea7:512b #> function Find-VMByIP { [CmdletBinding()] param ( [Parameter(Mandatory = $true)] [ipaddress[]]$IP ) Begin { $pasla = "NotFound" } Process { $vms = (Get-VM -Name *).Where({$_.PowerState -match "on"}) | Select-Object -Property Name, @{n="IP";e={$_.Guest.IPAddress}} foreach ($i in $ip) { $vinfo = $vms.Where({$_.IP -match $i}) if(!($vinfo.name)) { $hname = $pasla } else { $hname = $vinfo.name } $loopobj = [pscustomobject]@{ Name = $hname IP = $i } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.VMIPInfo') $loopobj } } } <# .SYNOPSIS Formats VMHost Output in Percentage .DESCRIPTION Returns an object of VMHost PerCent-Free and Percent-Used of CPU/Mhz and RAM/GB. Requires piped output from Get-VMHost from the Vmware.PowerCLI module. .PARAMETER VMHost Piped output of Get-VMHost from Vmware.PowerCLI .INPUTS Results of Get-VMHost: VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost .OUTPUTS PSCUSTOMOBJECT SupSkiFun.VMHostInfo .EXAMPLE Returns an object of one VMHost: Get-VMHost -Name ESX01 | Format-VMHostPercentage .EXAMPLE Returns an object of all VMHosts in a cluster, using the Format-VMHostPercentage alias: Get-VMHost -Location CL66 | fvp .EXAMPLE Returns an object of two VMHosts, with results in table format: Get-VMHost -Name ESX02 , ESX03 | Format-VMHostPercentage | Format-Table .EXAMPLE Returns an object of all VMHosts, placing results in a variable: $MyVar = Get-VMHost -Name * | Format-VMHostPercentage #> function Format-VMHostPercentage { [CmdletBinding()] [Alias("fvp")] param ( [Parameter(ValueFromPipeline=$true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]]$VMHost ) Process { foreach ($vh in $VMHost) { $cpufree = ($vh.CpuTotalMhz - $vh.CpuUsageMhz) $memfree = ($vh.MemoryTotalGb - $vh.MemoryUsageGB ) $loopobj=[pscustomobject]@{ HostName = $vh.Name UsedCPUPct = [math]::Round((($vh.CpuUsageMhz / $vh.CpuTotalMhz)*100),2) UsedRAMPct = [math]::Round((($vh.MemoryUsageGB / $vh.MemoryTotalGb)*100),2) FreeCPUPct = [math]::Round((($cpufree / $vh.CpuTotalMhz)*100),2) FreeRAMPct = [math]::Round((($memfree / $vh.MemoryTotalGb)*100),2) #UsedCPU = $vh.CpuUsageMhz #TotalCPU = $vh.CpuTotalMhz #UsedRAM = [math]::Round($vh.MemoryUsageGB,2) #TotalRAM = [math]::Round($vh.MemoryTotalGb,2) } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.VMHostInfo') $loopobj } } } <# .SYNOPSIS Obtains LUN of DataStore(s). .DESCRIPTION Returns an object of Name, LUN, WorkingPaths, PathSelectionPolicy, Device and DeviceDisplayName of VMFS Datastore(s). Requires Pipleline input from VmWare Get-Datastore. Will only process VMFS; NFS will not be accepted. .PARAMETER Name Requires Pipleline input from VmWare PowerCLI Get-Datastore. Only VMFS DataStores accepted. VMware.VimAutomation.ViCore.Types.V1.DatastoreManagement.VmfsDatastore .INPUTS VMware.VimAutomation.ViCore.Types.V1.DatastoreManagement.VmfsDatastore .OUTPUTS PSCUSTOMOBJECT SupSkiFun.LUNinfo .EXAMPLE Retrieve information from one VMFS DataStore: Get-DataStore -Name Dstore01 | Get-DataStoreLunID .EXAMPLE Return an object of multiple VMFS DataStores into a variable, using the Get-DataStoreLunID alias: $MyVar = Get-Datastore -Name Dstore* | Where-Object -Property Type -Match "VMFS" | gdli .EXAMPLE Query all VMFS DataStores of an ESX host, returning the object into a variable: $MyVar = Get-Datastore -VMHost ESX01 | Where-Object -Property Type -Match "VMFS" | Get-DataStoreLunID #> function Get-DataStoreLunID { [CmdletBinding()] [Alias("gdli")] param ( [Parameter(ValueFromPipeline=$true, Mandatory = $true)] [VMware.VimAutomation.ViCore.Types.V1.DatastoreManagement.VmfsDatastore[]]$Name ) Begin { $exhash = [vClass]::MakeHash('ex') } Process { function MakeObj { param ($lun, $luninfo=$null) $loopobj = [pscustomobject]@{ Name = $n.Name Lun = $lun WorkingPaths = $luninfo.WorkingPaths PathSelectionPolicy = $luninfo.PathSelectionPolicy Device = $luninfo.Device DeviceDisplayName = $luninfo.DeviceDisplayName } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.LUNinfo') $loopobj } foreach ($n in $name) { $ds, $e2, $hs, $li, $ld = $null $hs = $n.ExtensionData.host foreach ($h in $hs) { $e2 = Get-EsxCli -v2 -VMHost $exhash.$($h.key.ToString()) -ErrorAction SilentlyContinue if ($e2) { $ds = $n.ExtensionData.Info.Vmfs.Extent[0].DiskName $li = $e2.storage.nmp.device.list.Invoke((@{'device'=$ds})) if ($li.WorkingPaths.count -eq 1) { $ld = $li.WorkingPaths.ToString().Split(":")[3].Replace("L","") } else { $ld = $li.WorkingPaths[0].ToString().Split(":")[3].Replace("L","") } MakeObj -lun $ld -luninfo $li break } $ld = "Error Connecting to VMHosts" MakeObj -lun $ld -luninfo $li } } } } <#.SYNOPSIS Obtains Free Space Percentage of DataStore(s). .DESCRIPTION Returns an object of DataStore(s) Name, URL, PerCentFree, GBFree, GbUsed, GBTotal. Must be used in conjunction with Get-DataStore. See Examples. .PARAMETER Name Pipe DataStore(s) using Get-DataStore. See Examples. Auto-Generated SYNTAX (above) is not quite accurate. .INPUTS VMware DataStore Object from Get-DataStore .OUTPUTS Custom PSObject SupSkiFun.DataStoreInfo .EXAMPLE Process information from a DataStore: Get-DataStore -Name DataStore01 | Get-DataStorePercentageFree .EXAMPLE Process information from two DataStores and places object into a variable: $MyVar = Get-DataStore -Name DataStore01 , DataStore02 | Get-DataStorePercentageFree .EXAMPLE Process information from multiple DataStores using the Get-DataStorePercentageFree alias, placing object into a variable: $myVar = Get-Datastore *cl71 | gdpf #> function Get-DataStorePercentageFree { [cmdletbinding()] [Alias("gdpf")] param ( [Parameter(Mandatory = $false, ValueFromPipeline = $true, HelpMessage = "Pipe DataStore Object(s) from Get-Datastore")] [Alias("DataStore")] [VMware.VimAutomation.ViCore.Types.V1.DatastoreManagement.Datastore[]]$Name ) Process { if(!$name) { Write-Output "Input Object Required. For more information execute: help gdpf -full" break } foreach ($info in $name) { $loopobj=[pscustomobject]@{ Name = $info.name URL = $info.ExtensionData.info.url.Split("/")[5] PerCentFree = [math]::Round((($info.FreeSpaceGB / $info.CapacityGB)*100),2) GBFree = [math]::Round($info.FreeSpaceGB, 2) GBUsed = [math]::Round(($info.CapacityGB - $info.FreeSpaceGB),2) GBTotal = [math]::Round($info.CapacityGB, 2) } } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.DataStoreInfo') $loopobj } } <# .SYNOPSIS Retrieves file systems of the VMHost HyperVisor. .DESCRIPTION By default, retrieves file systems of the VMHost HyperVisor. If an optional pattern is specified only file systems matching the pattern are retrieved; akin to -match. Returns an object of HostName, MountPoint, PercentFree, Maximum, Used, and RamDiskName. .PARAMETER VMHost Mandatory. Output from VMWare PowerCLI Get-VMHost. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .PARAMETER Pattern Optional. If specified only returns mount points matching the pattern; akin to -match. See Examples. .INPUTS VMWare PowerCLI VMHost from Get-VMHost: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .OUTPUTS PSCUSTOMOBJECT SupSkiFun.ESXi.HyperVisorFS.Info .EXAMPLE Returns an object of all HyperVisor File Systems from one VMHost: Get-VMHost -Name ESX01 | Get-ESXiHyperVisorFS .EXAMPLE Returns an object of HyperVisor File Systems with a mount point matching "tmp" from two VMHosts: Get-VMHost -Name ESX02 , ESX03 | Get-ESXiHyperVisorFS -Pattern tmp .EXAMPLE Returns an object of all HyperVisor File Systems from all VMHosts in a cluster, into a variable: $myVar = Get-VMHost -Location CLUS01 | Get-ESXiHyperVisorFS #> Function Get-ESXiHyperVisorFS { [CmdletBinding()] Param ( [Parameter(ValueFromPipeline = $True, Mandatory = $True)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]] $VMHost, [string] $Pattern ) Process { foreach ($vmh in $vmhost) { $x2 = Get-EsxCli -V2 -VMHost $vmh if (-not($pattern)) { $z2 = $x2.system.visorfs.ramdisk.list.Invoke() } else { $z2 = $x2.system.visorfs.ramdisk.list.Invoke().where({$_.MountPoint -match $Pattern}) } foreach ($z in $z2) { $lo = [VClass]::MakeVFSObj($vmh.Name , $z) $lo } } } } <# .SYNOPSIS Retrieves install information from a running ESXi image on a VMHost. .DESCRIPTION Retrieves install information from a running ESXi image on a VMHost. Returns an object of HostName, Profile, Created, Vendor, Description, and VIBs. .PARAMETER VMHost Output from VMWare PowerCLI Get-VMHost. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .INPUTS VMWare PowerCLI VMHost from Get-VMHost: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .OUTPUTS [PSCUSTOMOBJECT] SupSkiFun.ESXi.Info .EXAMPLE Retrieve information from one VMHost, returning an object into a variable: $MyVar = Get-VMHost -Name ESX01 | Get-ESXiInfo .EXAMPLE Retrieve information from two VMHosts, returning an object into a variable: $MyVar = Get-VMHost -Name ESX02 , ESX03 | Get-ESXiInfo #> function Get-ESXiInfo { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]] $VMHost ) Process { Function MakeObj { param($vhdata,$resdata) $lo = [PSCustomObject]@{ HostName = $vhdata Profile = $resdata.Name.Replace("(Updated)","").Trim() Created = $resdata.CreationTime Vendor = $resdata.Vendor Description = $resdata.Description VIBs = $resdata.Vibs } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.ESXi.Info') $lo } foreach ($vmh in $VMHost) { $xcli = Get-EsxCli -V2 -VMHost $vmh $resp = $xcli.software.profile.get.Invoke() MakeObj -vhdata $vmh.Name -resdata $resp } } } <# .SYNOPSIS Retrieves HPe 650FLB Firmware and VIBs from VMHost(s). .DESCRIPTION Queries a VmHost for the firmware and drivers (elxnet , brcmfcoe) of a 650FLB Adapter. Returns an object of HostName, FirmwareVersion, NicName, NicDescription, NicDriverName, NicDriverVersion, NicDriverDescription, NicDriverID, HbaDriverName, HbaDriverVersion, HbaDriverDescription, and HbaID from VMHost(s). Specific to HPe and 650FLB. Will not query other Hardware Brands or NICs. If you get an error read it. .PARAMETER VMHost Output from VMWare PowerCLI Get-VMHost. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .INPUTS VMWare PowerCLI VMHost from Get-VMHost: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .OUTPUTS [PSCUSTOMOBJECT] SupSkiFun.Info.650FLB .EXAMPLE Retrieve info from two VMHosts, storing the results into a variable: $MyVar = Get-VMHost -Name ESX01 , ESX02 | Get-Info650 .EXAMPLE Retrieve info from all VMHosts in a cluster, storing the results into a variable: $MyVar = Get-VMHost -Location Cluster07 | Get-Info650 .EXAMPLE Retrieve info from all connected VMHosts, storing the results into a variable: $MyVar = Get-VMHost -Name * | Get-Info650 .LINK Get-VMHost #> Function Get-Info650 { [CmdletBinding()] param ( [Parameter(ValueFromPipeline = $true, Mandatory = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]]$VMHost ) begin { $vend = "HP" # Used to only query HP/HPe systems. $flex = "650FLB" # Used to query only 650FLB NICs $vib1 = @{"vibname" = "elxnet"} # Vib to Query $vib2 = @{"vibname" = "brcmfcoe"} # Vib to Query } process { Function MakeObj { param ($dfirm, $dnic, $dv1, $dv2) $lo = [pscustomobject]@{ HostName = $vmh.Name FirmwareVersion = $dfirm NicName = $dnic.Name NicDescription = $dnic.Description NicDriverName = $dv1.Name NicDriverVersion = $dv1.Version NicDriverDescription = $dv1.Description NicDriverID = $dv1.ID HbaDriverName = $dv2.Name HbaDriverVersion = $dv2.Version HbaDriverDescription = $dv2.Description HbaDriverID = $dv2.ID } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.Info.650FLB') $lo } foreach ($vmh in $VMHost) { $c2, $f1, $h1, $n1, $nic0, $v1, $v2 = $null $c2 = Get-EsxCli -V2 -VMHost $vmh $h1 = $c2.hardware.platform.get.Invoke().VendorName $n1 = $c2.network.nic.list.invoke() | Select-Object -First 1 if ($h1 -inotmatch $vend) { $f1 = "Not Processed. VendorName is $h1. VendorName must match $vend." MakeObj -dfirm $f1 -dnic $n1 } elseif ($n1.Description -inotmatch $flex) { $f1 = "Not Processed. NicDescription does not match $flex." MakeObj -dfirm $f1 -dnic $n1 } else { $nic0 = @{"nicname" = $n1.Name} $f1 = $c2.network.nic.get.Invoke($nic0).DriverInfo.FirmwareVersion $v1 = $c2.software.vib.get.Invoke($vib1) $v2 = $c2.software.vib.get.Invoke($vib2) MakeObj -dfirm $f1 -dnic $n1 -dv1 $v1 -dv2 $v2 } } } } <# .SYNOPSIS Returns Path Selection Policy from DataStores .DESCRIPTION Produces an object of DataStore, PathSelectionPolicy, HostName, Device, WorkingPaths, and CapacityGB for all requested DataStores. Will check against every VMHost that has the DataStore Mounted. Will return pipeline error if a non-VMFS DataStore is piped in. .PARAMETER DataStore Output from VMWare PowerCLI Get-DataStore. VMFS datastores only. VMware.VimAutomation.ViCore.Types.V1.DatastoreManagement.VmfsDatastore .EXAMPLE Return an object for one DataStore into a variable: $MyVar = Get-Datastore -Name Storage01 | Get-PathSelectionPolicy .EXAMPLE Return an object for all VMFS DataStores mounted on a ESXi Host into a variable: $MyVar = Get-Datastore -VMHost ESX03 -Name * | Where-Object -Property Type -Match VMFS | Get-PathSelectionPolicy .INPUTS Output from VMWare PowerCLI Get-DataStore - VMFS datastores only VMware.VimAutomation.ViCore.Types.V1.DatastoreManagement.VmfsDatastore .OUTPUTS [pscustomobject] SupSkiFun.PathSelectionInfo #> function Get-PathSelectionPolicy { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.DatastoreManagement.VmfsDatastore[]]$DataStore ) Begin { $exhash = [vClass]::MakeHash('ex') } Process { foreach ($ds in $DataStore) { $device = $ds.ExtensionData.Info.Vmfs.Extent.Diskname $devq = @{device = $device} $dshosts = $ds.ExtensionData.host foreach ($dsh in $dshosts) { $vmh = $exhash.$($dsh.key.ToString()) $e2 = Get-EsxCli -v2 -VMHost $vmh $r2 = $e2.storage.nmp.device.list.Invoke($devq) $lo = [pscustomobject]@{ DataStore = $ds.Name PathSelectionPolicy = $r2.PathSelectionPolicy HostName = $vmh Device = $device WorkingPaths = $r2.WorkingPaths CapacityGB = $ds.CapacityGB } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.PathSelectionInfo') Write-Output $lo } } } } <# .SYNOPSIS Retrieve PereniallyReserved value of RDMs from specified VMHost. .DESCRIPTION Retrieve PereniallyReserved value of RDMs from specified VMHost. Returns an object of HostName, Device, and IsPerenniallyReserved. Alias getpr. .PARAMETER VMHost VMWare PowerCLI VMHost Object from Get-VMHost VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost .INPUTS VMWare PowerCLI VMHost Object from Get-VMHost: VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost .OUTPUTS PSCUSTOMOBJECT SupSkiFun.RDM.Info .EXAMPLE Query one VMHost for PereniallyReserved value of RDMs: Get-VMHost -Name ESXi17 | Get-PereniallyReserved .EXAMPLE Query all VMHosts in a Cluster using the Get-PereniallyReserved alias, returning object into a variable: $myVar = Get-VMHost -Name * -Location Cluster12 | getpr .LINK Set-PereniallyReserved #> Function Get-PereniallyReserved { [CmdletBinding()] [Alias("getpr")] param ( [Parameter(Mandatory = $true , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]] $VMHost ) Process { Function MakeObj { param($diskdata , $hostdata) $loopobj = [pscustomobject]@{ HostName = $hostdata Device = $diskdata.Device IsPerenniallyReserved = $diskdata.IsPerenniallyReserved } $loopobj $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.RDM.Info') } foreach ($vmh in $vmhost) { $x2 = Get-EsxCli -VMHost $vmh -V2 $vd = (Get-Datastore -VMHost $vmh | Where-Object -Property Type -Match VMFS).ExtensionData.Info.Vmfs.Extent.Diskname $dl = $x2.storage.core.device.list.Invoke() # Remove DataStore LUNs, local MicroSd Card, Local in General, Non-Shared from the list. $dl = $dl | Where-Object { $_.Device -notin $vd -and $_.Device -notmatch "^mpx" -and $_.DisplayName -notmatch "Local" -and $_.IsSharedClusterwide -eq "true" } foreach ($d in $dl) { MakeObj -diskdata $d -hostdata $vmh.Name } } } } <# .SYNOPSIS Returns an Object of SnapShot Data for specified VMs .DESCRIPTION Returns an object of VM, SnapName, Description, SizeGB, UserName, Created, and File of a snapshot. Snapshot input must be piped from Get-SnapShot. See Examples. Note: Time occassionally skews a few seconds between VIevent (log) and Snapshot (actual) info. Ergo, this advanced function creates an 11 second window to correlate log information with actual information. Snapshots taken on the same VM within 10 seconds of each other may produce innaccurate results. Optionally, the 11 second window can be adjusted from 0 to 61 seconds by using the PreSeconds and PostSeconds parameters. .PARAMETER Name Pipe the Snapshot object. See Examples. .PARAMETER PreSeconds Number of seconds to capture VIEvents, before the SnapShot. Default value is 5. .PARAMETER PostSeconds Number of seconds to capture VIEvents, after the SnapShot. Default value is 5. .INPUTS VMWare SnapShot Object from Get-SnapShot VMware.VimAutomation.ViCore.Types.V1.VM.Snapshot .OUTPUTS PSCUSTOMOBJECT SupSkiFun.SnapShot.Data .EXAMPLE Obtain Snapshot Data from one VM: Get-SnapShot -VM Guest01 | Get-SnapShotData .EXAMPLE Obtain Snapshot Data from multiple VMs, using the Get-SnapShotData alias, placing the object into a variable: $MyVar = Get-Snapshot -VM *WEB* | gsd .EXAMPLE Obtain Snapshot Data from one VM, increasing the VIEvent window to 31 seconds by setting both the PreSeconds and PostSeconds parameters to 15: Get-SnapShot -VM Guest01 | Get-SnapShotData -PreSeconds 15 -PostSeconds 15 #> function Get-SnapShotData { [CmdLetBinding()] [Alias("gsd")] param ( [Parameter(ValueFromPipeline = $true, Mandatory = $true)] [VMware.VimAutomation.ViCore.Types.V1.VM.Snapshot[]]$Name, [Parameter(Mandatory = $false)] [ValidateRange(0,30)] [Int]$PreSeconds = 5, [Parameter(Mandatory = $false)] [ValidateRange(0,30)] [Int]$PostSeconds = 5 ) Process { foreach ($snap in $name) { <# Create a 10 second window of VI events because snapshot creation time can skew a few seconds from the log entry #> $presec = $snap.Created.AddSeconds(( - $preseconds)) $postsec = $snap.Created.AddSeconds(( + $postseconds)) $files = ((Get-VM -Name $snap.VM).ExtensionData.LayoutEx.File | Where-Object {$_.type -match "snapshotData"}).Name $evnts = Get-VIEvent -Entity $snap.VM.Name -Start $presec -Finish $postsec $entry = $evnts | Where-Object {$_.FullFormattedMessage -match $ffm } $loopobj = [pscustomobject]@{ VM = $snap.VM.Name SnapName = $snap.Name Description = $snap.Description SizeGB = [math]::Round($snap.SizeGB, 3) UserName = $entry.UserName Created = $snap.Created File = $files } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.SnapShot.Data') $loopobj } } } <# .SYNOPSIS Retrieves assigned tag information for VM or VMHost .DESCRIPTION Retrieves assigned tag information for VM or VMHost, returning an object of Entity, Name, Category, and Description. .PARAMETER VM VMWare PowerCLI VM Object from Get-VM VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine .PARAMETER VMHost VMWare PowerCLI VMHost Object from Get-VMHost VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost .EXAMPLE Retrieve tag information of one VM, returning the object into a variable: $myVar = Get-VM -Name SYS01 | Get-TagInfo .EXAMPLE Retrieve tag information of two VMs, returning the object into a variable: $myVar = Get-VM -Name SYS02 , SYS03 | Get-TagInfo .EXAMPLE Retrieve tag information of one VMHost, returning the object into a variable: $myVar = Get-VMHost -Name ESX01 | Get-TagInfo .EXAMPLE Retrieve tag information of two VMHosts, returning the object into a variable: $myVar = Get-VMHost -Name ESX02 , ESX03 | Get-TagInfo .INPUTS VMWare PowerCLI VM or VMHost Object from Get-VM or Get-VMHost: VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost .OUTPUTS PSCUSTOMOBJECT SupSkiFun.Tag.Assignment.Info #> function Get-TagInfo { [CmdletBinding()] [Alias()] param ( [Parameter(ParameterSetName = "VM" , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine[]]$VM, [Parameter(ParameterSetName = "VMHost" , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]]$VMHost ) Begin { $h1 = @{Name = "No Tag Assignment Found"} $nd = @{Tag = $h1} } Process { Function MakeObj { param($vdata,$tdata) $lo = [PSCustomObject]@{ Entity = $vdata.Name Name = $tdata.Tag.Name Category = $tdata.Tag.Category Description = $tdata.Tag.Description } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.Tag.Assignment.Info') $lo } Function GetTagInfo($ces) { foreach ($ce in $ces) { $il = $ce | Get-TagAssignment if($il) { foreach ($i in $il) { MakeObj -vdata $ce -tdata $i } } else { MakeObj -vdata $ce -tdata $nd } } } if ($vm) { GetTagInfo($vm) } elseif ($vmhost) { GetTagInfo($vmhost) } } } <# .SYNOPSIS Retrieves installed VIBs from VMHost(s). .DESCRIPTION By default returns an object of HostName, Name, ID, Vendor and Installed(Date) for all installed VIBs from VMHost(s). Alternatively returns an object of multiple properties, for up to ten particular VIBs. .PARAMETER VMHost Output from VMWare PowerCLI Get-VMHost. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .PARAMETER Name Optional. Provides more detailed information for up to ten particular VIBs. .INPUTS VMWare PowerCLI VMHost from Get-VMHost: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .OUTPUTS [PSCUSTOMOBJECT] SupSkiFun.VIBinfo .EXAMPLE Retrieve all VIBs from two VMHosts, storing the results into a variable: $MyVar = Get-VMHost -Name ESX01 , ESX02 | Get-VIB .EXAMPLE Retrieve two specific VIBs from one VMHost, storing the results into a variable: $MyVar = Get-VMHost -Name ESX03 | Get-VIB -Name vsan , vmkfcoe #> function Get-VIB { [CmdletBinding()] param ( [Parameter(ValueFromPipeline = $true, Mandatory = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]]$VMHost, [Parameter(Mandatory = $false)] [ValidateCount(1,10)] [string[]]$Name ) process { Function allvib { foreach ($vmh in $VMHost) { $c2 = Get-EsxCli -V2 -VMHost $vmh $v2 = $c2.software.vib.list.Invoke() foreach ($v in $v2) { $lo = [pscustomobject]@{ HostName = $vmh.Name Name = $v.Name ID = $v.ID Vendor = $v.Vendor Installed = $v.InstallDate } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.VIBinfo') $lo } } } Function onevib { foreach ($vmh in $VMHost) { $c2 = Get-EsxCli -V2 -VMHost $vmh foreach ($n in $name) { $t1 = $c2.software.vib.get.CreateArgs() $t1.vibname = $n $v2 = $c2.software.vib.get.Invoke($t1) $v2 | Add-Member -Type NoteProperty -Name HostName -Value $vmh.name $v2.PSObject.TypeNames.Insert(0,'SupSkiFun.VIBinfo') $v2 $v2.clear() } } } if ($VMHost -and !$Name) { allvib } elseif ($VMHost -and $Name) { onevib } else { Write-Output "Pipe in VMHost or Enter Vib Name. Try: help Get-VIB -full" } } } <# .SYNOPSIS Obtain SCSI Paths on VMHost(s) .DESCRIPTION Returns an object of CanonicalName, RuntimeName, LunType, Vendor, CapacityGB, MultipathPolicy, HostName, LUNPath, State, Working, Preferred and SanID from VMHosts. .PARAMETER VMHost Enter or Pipe one or more VMHosts. .OUTPUTS PSCUSTOMOBJECT SupSkiFun.LUNPathInfo .EXAMPLE Obtain LUN/PATH information for one VMHost: Get-VMHostScsiPath -VMHost ESX01 .EXAMPLE Obtain LUN/PATH information for all VMHosts in a cluster, using the Get-VMHostScsiPath alias, returning the output object into a variable: $MyVar = Get-VMHost * -Location CLUSTER01 | gvsp #> function Get-VMHostScsiPath { [CmdletBinding()] [Alias("gvsp")] param ( [Parameter(Mandatory=$true, ValueFromPipelineByPropertyName=$true, HelpMessage = "Enter one or more VMHost names" )] [Alias("Name")] [string[]]$VMHost ) Process { foreach ($vmh in $VMHost) { $luns = Get-ScsiLun -VMHost $vmh -LunType disk | Where-Object {$_.canonicalname -notmatch "mpx"} foreach ($lun in $luns) { $paths = Get-ScsiLunPath -ScsiLun $lun foreach ($path in $paths) { $loopobj = [pscustomobject]@{ CanonicalName = $lun.CanonicalName RuntimeName = $lun.RuntimeName LunType = $lun.LunType Vendor = $lun.Vendor CapacityGB = $lun.CapacityGB MultipathPolicy = $lun.MultipathPolicy HostName = $lun.VMHost LUNPath = $path.ExtensionData.Name State = $path.State Working = $path.ExtensionData.IsWorkingPath Preferred = $path.Preferred SanId = $path.SanId } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.LUNPathInfo') $loopobj } } } } } <# .SYNOPSIS Retrieves Up Time for VMHost(s). .DESCRIPTION Returns object of VMHost, and Up Time in Days, Hours and Minutes. Requires input from Get-VMHost. Alias = gvut .PARAMETER VMHost Output from VMWare PowerCLI Get-VMHost. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .INPUTS VMWare PowerCLI VMHost from Get-VMHost: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .OUTPUTS PSCUSTOMOBJECT SupSkiFun.Uptime .EXAMPLE Retrieve uptime from a host: Get-VMHost -Name ESX01 | Get-VMHostUpTime .EXAMPLE Retrieve uptime from two hosts, placing object into a variable: $MyObj = Get-VMHost -Name ESX03 , ESX04 | Get-VMHostUpTime .EXAMPLE Retrieve uptime from all cluster hosts, using the Get-VMHostUpTime alias, placing object into a variable: $MyObj = Get-VMHost -Location Cluster07 | gvut #> function Get-VMHostUpTime { [CmdletBinding()] [Alias("gvut")] param ( [Parameter(Mandatory = $false , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]]$VMHost ) Begin { $errmsg = "VMHost Object Required. Try: Help Get-VMHostUptime -full" } Process { If(!($vmhost)) { Write-Output $errmsg break } foreach ($vmh in $vmhost) { $gupt = [timespan]::FromSeconds($vmh.ExtensionData.Summary.QuickStats.Uptime) $loopobj = [pscustomobject]@{ HostName = $vmh Days = $gupt.days Hours = $gupt.hours Minutes = $gupt.minutes } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.Uptime') $loopobj $gupt = $null } } } <# .SYNOPSIS Obtains WWN from specified VMHost .DESCRIPTION Returns an object of World Wide Numbers from VMHost Fibre Channel HBAs .PARAMETER VMHost VMHost Name(s) or VMHost Object from Vmware.PowerCLI .INPUTS VMHost Name(s) or VMHost Object from Vmware.PowerCLI VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost .OUTPUTS PSCUSTOMOBJECT SupSkiFun.WWN .EXAMPLE Obtain World Wide Numbers from one VMHost: Get-VMHostWWN -VMHost ESX01 .EXAMPLE Obtain World Wide Numbers from two VMHosts using the Get-VMHostWWN alias: gvw -VMHost ESX03, ESX04 OR Get-VMHost ESX03, ESX04 | gvw .EXAMPLE Return an obect of WWNs from all VMHosts in a Cluster into a Variable: $MyVar = Get-VMHost -Location Cluster07 | Get-VMHostWWN #> function Get-VMHostWWN { [CmdletBinding()] [Alias("gvw")] param ( [Parameter(ValueFromPipeline = $true, ValueFromPipelineByPropertyName = $true )] [string[]]$VMHost ) Process { foreach ($vmh in $VMHost) { $hbainfo = Get-VMHostHba -VMHost $vmh -Type FibreChannel foreach ($hba in $hbainfo) { $loopobj = [pscustomobject]@{ HostName = $vmh Adapter = $hba.Device WWN = "{0:X}" -f $hba.PortWorldWideName } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.WWN') $loopobj } } } } <# .SYNOPSIS Returns IP Address(es) of VMs .DESCRIPTION Returns an object of VM Names and IP Address(es) .PARAMETER VM Names of VMs or Piped input from VMWare PowerCLI Get-VM cmdlet. Alias Name. .OUTPUTS [pscustomobject] SupSkiFun.VMIPInfo .EXAMPLE Return IP(s) from two VMs: Get-VMIP -VM SERVER07 , SYSTEM09 .EXAMPLE Return IP(s) from multiple VMS, placing the returned object into a variable: $MyVar = Get-VM -Name LAB0* | Get-VMIP #> function Get-VMIP { [CmdletBinding()] param ( [Parameter(Mandatory = $true, ValueFromPipeline = $true, ValueFromPipelineByPropertyName = $true )] [Alias("Name")] [string[]]$VM ) Process { try { Foreach ($v in $vm) { $vinfo = Get-VM -Name $v -ErrorAction SilentlyContinue -ErrorVariable err if (!($err)) { $loopobj = [pscustomobject]@{ Name = $vinfo.Name IP = $vinfo.Guest.IPAddress } } else { $loopobj = [pscustomobject]@{ Name = $v IP = $err.exception.ToString().Split("`t")[3] } } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.VMIPInfo') $loopobj } } catch { Write-Error "problem" | Out-Null } } } <# .SYNOPSIS Retrieves VM process information .DESCRIPTION Retrieves VM process information, returning an object of VM, PowerState, DisplayName, WorldID, VMXCartelID, ConfigFile, UUID, and VMHost. .PARAMETER VM Output from VMWare PowerCLI Get-VM. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine] .EXAMPLE Retrieve process information of one VM, returning the object into a variable: $myVar = Get-VM -Name SYS01 | Get-VMpid .EXAMPLE Retrieve process information of two VMs, returning the object into a variable: $myVar = Get-VM -Name SYS02 , SYS03 | Get-VMpid .INPUTS VMWare PowerCLI VM from Get-VM: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine] .OUTPUTS [pscustomobject] SupSkiFun.VM.PID.Info .LINK Stop-VMpid #> function Get-VMpid { [CmdletBinding()] Param ( [Parameter(Mandatory = $true , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine[]]$VM ) Process { Function MakeObj { param($vdata,$resdata) $lo = [PSCustomObject]@{ VM = $vdata.Name PowerState = $vdata.PowerState DisplayName = $resdata.DisplayName WorldID = $resdata.WorldID VMXCartelID = $resdata.VMXCartelID ConfigFile = $resdata.ConfigFile UUID = $resdata.UUID VMHost = $vdata.VMHost.Name } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.VM.PID.Info') $lo } foreach ($v in $vm) { $x2 = Get-EsxCli -V2 -VMHost $v.vmhost.Name $r1 = $x2.vm.process.list.Invoke() | Where-Object -Property DisplayName -eq $v.Name MakeObj -vdata $v -resdata $r1 } } } <# .Synopsis Lists VMs with outdated VM Tools. See Examples. .DESCRIPTION By default returns an object of PoweredOn VM(s) with outdated tools. Or, if specified with -List, returns an object of VM(s) with outdated tools consisting of Name, Tools Status, Tools Version and OS. Must be used in conjunction with Get-VM. See Examples. .PARAMETER VM Pipe VM(s) using Get-VM. See Examples. Auto-Generated SYNTAX (above) is not quite accurate. .PARAMETER List If specified returns an object of Name, Tools Status, Tools Version and OS of PoweredOm VM(s) with outdated tools. If NOT specified (default) Returns an object of PoweredOn VM(s) with outdated tools. .INPUTS VMware VM Object from Get-VM .OUTPUTS VMware VM Object OR Custom PSObject SupSkiFun.VmToolInfo .EXAMPLE Query for one VM with outdated VM tools with VM object as output: Get-VM -name VM01 | Get-VMToolOutdated .EXAMPLE Query for VMs with outdated VM tools by cluster, returning an object in list form: Get-VM -location Cluster01 | Get-VMToolOutdated -List .EXAMPLE Query for VMs with outdated VM tools by DataStore placing object into a variable: $MyVar = Get-VM -datastore DataStore01 | Get-VMToolOutdated .EXAMPLE Query all VMs for outdated VM tools using the Get-VMToolOutdated alias, placing object into a variable. $MyVar = Get-VM * | gvto #> function Get-VMToolOutdated { [CmdletBinding()] [Alias("gvto")] param ( [Parameter(ValueFromPipeline=$true)] [Alias("VirtualMachine")] [psobject[]]$VM, [switch]$List ) Process { foreach ($info in $vm) { if($info | Where-Object {$info.powerstate -notmatch 'off' -and $info.ExtensionData.guest.toolsstatus -notmatch 'ok'}) { if($list) { $loopobj=[pscustomobject]@{ Name=$info.name Status=$info.ExtensionData.guest.ToolsStatus Version=$info.ExtensionData.guest.ToolsVersion.ToDecimal($null) OS=$info.guest.OSFullName } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.VmToolInfo') $loopobj } else { $info } } } } } <# .Synopsis Returns total size of VM on a Data Store. .DESCRIPTION Returns an object of total Datastore Consumption of a VM on a DataStore. Includes all files: .log, .vmx, .vswp, .vmdk, etc. in the computation. Excludes ".rdmp" files (RDMs). Note that a thin provisioned disk may reflect less disk space than is actually provisioned. Default output is a hostname with total size. Accepts PipeLine input from Get-VM or CSV file. Use the -full parameter to include all file names and thier values as an embedded object. Optimally used with Get-VM, returning information into an object. See Example 4. .PARAMETER vm Mandatory. Enter vm name(s), use a variable, or pipe data in. .PARAMETER full Optional. Use to return all file names as an embedded object, along with the regular output. .EXAMPLE Displays VM name and total size: Get-VMTotalSize -VM MyVm01 .EXAMPLE Displays VM name and total size along with each file name and values: Get-VMTotalSize -VM MyVm02 -full .EXAMPLE Displays VM names and total sizes via pipe from Get-VM: Get-Vm MyVm* | Get-VMTotalSize .EXAMPLE Places VM names, files and total size into an object using Get-VM piped to the Get-VMTotalSize alias: $MyObj = Get-VM *3* | gvts -full #> function Get-VMTotalSize { [CmdletBinding()] [Alias("gvts")] param ( [Parameter(Mandatory=$true, HelpMessage="Enter one or more VM names or pipe from file", ValueFromPipelineByPropertyName=$true)] [Alias("Name","ComputerName")] [string[]]$VM, [switch]$full ) Process { $covm = get-vm $vm Write-Verbose "Value of `$covm: $covm" foreach ($v in $covm) { Write-Verbose "Value of `$v in loop: $v" #$sumsize=$v.ExtensionData.layoutex.file.size | $sumdisks = $v.ExtensionData.layoutex.file | Where-object {$_.name -notmatch "rdmp"} $sumsize = $sumdisks.size |Measure-Object -Sum | Select-Object @{n="SizeGB";e={"{0:N3}" -f ($_.sum /1gb)}} if($full) { $loopobj = [pscustomobject]@{ VMName=$v.Name VMSizeGB=$sumsize.sizegb Files=$v.ExtensionData.layoutex.file } } else { $loopobj = [pscustomobject]@{ VMName=$v.Name SizeGB=$sumsize.sizegb } } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.VMsize') $loopobj } } } <# .SYNOPSIS Retrieves alarms from a Virtual Center .DESCRIPTION Returns an object of alarms from Virtual Center consisiting of: Name, ObjectType, AlarmType, Description, Key, Status, Acknowledged, DateTime Optimally used as shown in Example 2. .OUTPUTS PSCUSTOMOBJECT SupSkiFun.AlarmInfo .EXAMPLE Output all alerts onto screen: Get-VsphereAlarm .EXAMPLE Return object into a variable, using the Get-VSphereAlarm alias: $MyVar = gvsa #> function Get-VSphereAlarm { [CmdletBinding()] [Alias("gvsa")] param() Begin { $servi = Get-View ServiceInstance $rootf = Get-View -Id $servi.Content.RootFolder $alrms = $rootf.TriggeredAlarmState } Process { foreach ($alrm in $alrms) { $alrmtype = $alrm.Entity.Type switch ($alrmtype) { "HostSystem" {$objname = (Get-VMHost -Id $alrm.Entity).Name ; break} "VirtualMachine"{$objname = (Get-VM -Id $alrm.Entity).Name ; break} "DataStore" {$objname = (Get-DataStore -Id $alrm.Entity).Name ; break} "Folder" {$objname = (Get-Folder -Id $alrm.Entity).Name ; break} default {$objname = "Unknown"} } $alrminfo = get-view -Id $alrm.alarm $loopobj = [pscustomobject]@{ Name = $objname ObjectType = $alrmtype AlarmType = $alrminfo.Info.Name Description = $alrminfo.Info.Description Key = $alrm.Key Status = $alrm.OverallStatus Acknowledged = $alrm.Acknowledged DateTime = $alrm.time } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.AlarmInfo') $loopobj } } } <# .SYNOPSIS Returns Alarm Enabled Status from VMHosts and Clusters .DESCRIPTION Returns an object of VMHosts and / or Clusters Names with Alarm Enabled Status. Requires VMHosts and / or Cluster objects to be piped in or specified as a parameter. .PARAMETER VMHost Output from VMWare PowerCLI Get-Cluster [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .PARAMETER Cluster Output from VMWare PowerCLI Get-Cluster [VMware.VimAutomation.ViCore.Types.V1.Inventory.Cluster] .INPUTS VMWare PowerCLI VMHost and / or Cluster Object from Get-VMHost and / or Get-Cluster: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] [VMware.VimAutomation.ViCore.Types.V1.Inventory.Cluster] .OUTPUTS PSCustomObject SupSkiFun.AlarmConfig .EXAMPLE Return information from one VMHost: Get-VMHost -Name ESX01 | Get-VSphereAlarmConfig .EXAMPLE Return information from one Cluster using the Get-VsphereAlarmConfig alias: Get-Cluster -Name CLUS01 | gvsac .EXAMPLE Return information from multiple VMHosts, returning the object into a variable: $MyVar = Get-VMHost -Name ESX4* | Get-VsphereAlarmConfig .EXAMPLE Return information from all VMHosts and Clusters in the connected Virtual Center: $host = Get-VMHost -Name * $clus = Get-Cluster -Name * $MyVar = Get-VSphereAlarmConfig -VMHost $host -Cluster $clus #> function Get-VSphereAlarmConfig { [CmdletBinding()] [Alias("gvsac")] param ( [Parameter(Mandatory = $false , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]]$VMHost, [Parameter(Mandatory = $false , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.Cluster[]]$Cluster) Begin { $errmsg = "VMHost or Cluster Object Required. Try: Help Get-VSphereAlarmConfig -full" } Process { If(!($vmhost -or $cluster)) { Write-Output $errmsg break } If($vmhost) { foreach ($vmh in $vmhost) { $loopobj = [pscustomobject]@{ Name = $vmh.Name Enabled = $vmh.ExtensionData.AlarmActionsEnabled Type = "VMHost" } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.AlarmConfig') $loopobj } } If($cluster) { foreach ($clu in $cluster) { $loopobj = [pscustomobject]@{ Name = $clu.Name Enabled = $clu.ExtensionData.AlarmActionsEnabled Type = "Cluster" } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.AlarmConfig') $loopobj } } } } <# .SYNOPSIS Obtain VSphere License(s) .DESCRIPTION Obtain VSphere License(s) .EXAMPLE Prints license information to the screen: Get-VSphereLicense .EXAMPLE Returns an Object of License Information into a Variable using the Get-VSphereLicense alias: $MyVar = gvsl #> function Get-VSphereLicense { [CmdletBinding()] [Alias("gvsl")] param() Process { $srvins = Get-View ServiceInstance -Server $DefaultVIServer $licmgr = Get-View -Id $srvins.Content.LicenseManager $licmgr.UpdateViewData() $licmgr.Licenses.Where({$_.EditionKey -notmatch "eval"}) | Select-Object * -ExcludeProperty Properties, Labels } } <# .SYNOPSIS Lists VCenter Logon Sessions .DESCRIPTION Lists VCenter Logon Sessions .EXAMPLE Output to screen: Get-VSphereSession .EXAMPLE Ouput to Variable: $MyVar = Get-VSphereSession #> function Get-VSphereSession { (Get-View $DefaultViserver.ExtensionData.Client.ServiceContent.SessionManager).SessionList } <# .SYNOPSIS Returns an object reflecting the status of Vsphere Clusters and VMHosts. .DESCRIPTION By default (i.e. with no parameters), returns an object of Name, Type, Overall Status and Config Status of all Clusters and VMHosts. Specific Cluster(s) and/or VMHosts(s) can be specified with parameters. See Parameters and Examples. Most common use is Example 4. Non-green statuses return error(s) within Config. .PARAMETER Cluster Optional. If defined, returns only the Cluster(s) specified. Can be combined with VMHost. .PARAMETER VMHost Optional. If defined, returns only the VMHost(s) specified. Can be combined with Cluster. .OUTPUTS Custom PSObject SupSkiFun.VSphereStatus .EXAMPLE Query for one Cluster Get-VSphereStatus -Cluster MyCluster01 .EXAMPLE Query for two VMHosts Get-VSphereStatus -VMHost MyESX01 , MyESX02 .EXAMPLE Query for multiple Clusters and VMHosts placing the object into a variable. $myVar = Get-VSphereStatus -Cluster *PROD -VMHost *n3* .EXAMPLE Query for all Clusters and VMHosts using the Get-VSphereStatus alias, placing the object into a variable. $info = gvss #> function Get-VSphereStatus { [CmdletBinding()] [Alias("gvss")] param ( [Parameter()] [string[]]$Cluster = "*" , [Parameter()] [string[]]$VMHost = "*" ) Begin { if($cluster -notcontains "*" -and $vmhost -contains "*") { $cluses = Get-Cluster -Name $Cluster $vmhes = $null } elseif($cluster -contains "*" -and $vmhost -notcontains "*") { $cluses = $null $vmhes = Get-VMHost -Name $VMHost } else { $cluses = Get-Cluster -Name $Cluster $vmhes = Get-VMHost -Name $VMHost } } Process { foreach ($clus in $cluses) { $loopobj = [pscustomobject]@{ Name=$clus.ExtensionData.Name Type = "cluster" Overall=$clus.ExtensionData.OverallStatus Config=$clus.ExtensionData.ConfigStatus } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.VSphereStatus') $loopobj } foreach ($vmh in $vmhes) { $cstatus = $vmh.ExtensionData.ConfigStatus if ($cstatus -notmatch "green") { $config = $vmh.ExtensionData.ConfigIssue.fullformattedmessage } else { $config = $cstatus } $loopobj = [pscustomobject]@{ Name=$vmh.ExtensionData.Name Type = "vmhost" Overall = $vmh.ExtensionData.OverallStatus Config = $config } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.VSphereStatus') $loopobj $config = $null } } } <# .SYNOPSIS Installs an image profile from a local depot onto a VMHost with ESXi already installed. .DESCRIPTION Replaces the installed image with the new image profile. Will result in the removal of installed VIBs that don't match the profile. System Should be in Maintenance Mode. Use DryRun to test. Read / Evaluate the returned object. See Examples. Returns an object of HostName, Message, RebootRequired, VIBSInstalled, VIBSRemoved, and VIBSSkipped. .PARAMETER VMHost Output from VMWare PowerCLI Get-VMHost. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .PARAMETER Depot Full local server file path pointing to an offline bundle .zip file. Example: /vmfs/volumes/Datastore/Path/6.7/VMware-ESXi-6.7.0-Update1-11675023-HPE-Gen9plus-670.U1.10.4.0.19-Apr2019-depot.zip .PARAMETER ImageProfile Image Profile to Install. Often found within <id> </id> of metadata/vmware.xml in the *depot.zip file. Example: HPE-ESXi-6.7.0-Update1-Gen9plus-670.U1.10.4.0.19 .PARAMETER DryRun If specified, performs a dry-run only. Reports the VIB-level operations that would be performed, but changes nothing. .INPUTS VMWare PowerCLI VMHost from Get-VMHost: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .OUTPUTS [PSCUSTOMOBJECT] SupSkiFun.ESXi.Info .EXAMPLE Perform a DryRun (Test) Install of an image onto one VMHost, returning an object into a variable: $d = '/vmfs/volumes/Datastore/Path/6.7/VMware-ESXi-6.7.0-Update1-11675023-HPE-Gen9plus-670.U1.10.4.0.19-Apr2019-depot.zip' $p = 'HPE-ESXi-6.7.0-Update1-Gen9plus-670.U1.10.4.0.19' $MyVar = Get-VMHost -Name ESX01 | Install-ESXi -DryRun .EXAMPLE Install image onto one VMHost, returning an object into a variable: $d = '/vmfs/volumes/Datastore/Path/6.7/VMware-ESXi-6.7.0-Update1-11675023-HPE-Gen9plus-670.U1.10.4.0.19-Apr2019-depot.zip' $p = 'HPE-ESXi-6.7.0-Update1-Gen9plus-670.U1.10.4.0.19' $MyVar = Get-VMHost -Name ESX02 | Install-ESXi .EXAMPLE Install image onto two VMHosts, returning an object into a variable: $d = '/vmfs/volumes/Datastore/Path/6.7/VMware-ESXi-6.7.0-Update1-11675023-HPE-Gen9plus-670.U1.10.4.0.19-Apr2019-depot.zip' $p = 'HPE-ESXi-6.7.0-Update1-Gen9plus-670.U1.10.4.0.19' $MyVar = Get-VMHost -Name ESX03 , ESX04 | Install-ESXi #> function Install-ESXi { [CmdletBinding(SupportsShouldProcess = $true , ConfirmImpact = 'high')] Param ( [Parameter(Mandatory = $true, ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]] $VMHost, [Parameter(Mandatory = $true)] [string] $Depot, [Parameter(Mandatory = $true)] [string] $ImageProfile, [switch] $DryRun ) Process { Function MakeObj { param($vhdata,$resdata) $lo = [PSCustomObject]@{ HostName = $vhdata Message = $resdata.Message RebootRequired = $resdata.RebootRequired VIBsInstalled = $resdata.VIBsInstalled VIBsRemoved = $resdata.VIBsRemoved VIBsSkipped = $resdata.VIBsSkipped } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.ESXi.Info') $lo } foreach ($vmh in $VMHost) { if($PSCmdlet.ShouldProcess("$vmh using $imageprofile")) { $xcli = Get-EsxCli -v2 -VMHost $vmh $hash = $xcli.software.profile.install.CreateArgs() $hash.depot = $depot $hash.profile = $imageprofile $hash.oktoremove = $true if ($dryrun) { $hash.dryrun = $true } $resp = $xcli.software.profile.install.Invoke($hash) MakeObj -vhdata $vmh.Name -resdata $resp } } } } <# .SYNOPSIS Installs VIB(s) on VMHost(s). .DESCRIPTION Installs VIB(s) on VMHost(s) and returns an object of HostName, Message, RebootRequired, VIBSInstalled, VIBSRemoved, and VIBSSkipped. .PARAMETER VMHost Output from VMWare PowerCLI Get-VMHost. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .PARAMETER URL URL(s) for the VIB(s). https://www.example.com/VMware_bootbank_vsanhealth_6.5.0-2.57.9183449.vib , https://www.example.com/NetAppNasPlugin.v23.vib .INPUTS VMWare PowerCLI VMHost from Get-VMHost: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .OUTPUTS [PSCUSTOMOBJECT] SupSkiFun.VIBinfo .EXAMPLE Install one VIB to one VMHost, returning an object into a variable: $u = 'https://www.example.com/VMware_bootbank_vsanhealth_6.5.0-2.57.9183449.vib' $MyVar = Get-VMHost -Name ESX02 | Install-VIB -URL $u .EXAMPLE Install two VIBs to two VMHosts, returning an object into a variable: $uu = 'https://www.example.com/VMware_bootbank_vsanhealth_6.5.0-2.57.9183449.vib' , 'https://www.example.com/NetAppNasPlugin.v23.vib' $MyVar = Get-VMHost -Name ESX03 , ESX04 | Install-VIB -URL $uu #> function Install-VIB { [CmdletBinding(SupportsShouldProcess = $true , ConfirmImpact = 'high')] Param ( [Parameter(Mandatory = $true, ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]]$VMHost, [Parameter(Mandatory = $true)] [string[]]$URL ) Process { Function MakeObj { param($vhdata,$resdata) $lo = [PSCustomObject]@{ HostName = $vhdata Message = $resdata.Message RebootRequired = $resdata.RebootRequired VIBsInstalled = $resdata.VIBsInstalled VIBsRemoved = $resdata.VIBsRemoved VIBsSkipped = $resdata.VIBsSkipped } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.VIB.Info') $lo } $cible = @{viburl = $URL} foreach ($vmh in $VMHost) { if($PSCmdlet.ShouldProcess("$vmh installing $URL")) { $xcli = Get-EsxCli -v2 -VMHost $vmh $resp = $xcli.software.vib.install.invoke($cible) MakeObj -vhdata $vmh.Name -resdata $resp } } } } <# .SYNOPSIS Consolidates VM disk(s) .DESCRIPTION Consolidates VM disks, returning last 7 log entries. Skips processing and reports if a specified VM does not require consolidation. Reports error if VM not found. .PARAMETER VM Mandatory. Enter one or more comma seperated names. Optionally pipe from Get-VM or CSV.\ .OUTPUTS PSCUSTOMOBJECT SupSkiFun.Consolidation .EXAMPLE Consolidates one VM: Invoke-VMConsolidation -VM Guest01 .EXAMPLE Consolidates two VMs: Invoke-VMConsolidation -VM Guest03 , Guest04 .EXAMPLE Consolidates all VMs on Cluster 77, bypassing confirmation, using the Invoke-VMConsolidation alias: Get-VM -Location Cluster77 | ivc -confirm:$false #> function Invoke-VMConsolidation { [CmdletBinding(SupportsShouldProcess=$true, ConfirmImpact='high' )] [Alias("ivc")] param ( [Parameter(Mandatory = $true, ValueFromPipelineByPropertyName = $true, HelpMessage = "Enter one or more VM names" )] [Alias("Name")] [string[]]$VM ) Begin { $errtxt = "Error" } Process { foreach ($va in $vm) { if($PSCmdlet.ShouldProcess("$va")) { try { $vtp = Get-VM -Name $va -ErrorVariable err -ErrorAction SilentlyContinue $vtps = $vtp.ExtensionData.Runtime.ConsolidationNeeded If($err) { $loopobj = [pscustomobject]@{ Name = $va DateTime = $errtxt UserName = $errtxt Message = $err.exception.ToString().split("`t")[3] } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.Consolidation') $loopobj } elseif(!($vtps)) { $loopobj = [pscustomobject]@{ Name = $va DateTime = $errtxt UserName = $errtxt Message = "Not processing $vtp because Consolidation Needed equals $vtps" } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.Consolidation') $loopobj } else { $vtp.ExtensionData.ConsolidateVMDisks() $log = Get-VIEvent -Entity $vtp | Select-Object -Property CreatedTime , UserName , FullFormattedMessage -First 7 foreach ($notch in $log) { $loopobj = [pscustomobject]@{ Name = $va DateTime = $notch.CreatedTime.DateTime.Split(",",2)[1].trim() UserName = $notch.UserName Message = $notch.FullFormattedMessage } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.Consolidation') $loopobj } } } catch { Write-Error "problem" | Out-Null } } } } } <# .SYNOPSIS Rescans and Refreshes HBA(s) .DESCRIPTION Rescans and Refreshes HBA(s) for specified VMHosts(s) or Cluster(s). No Output by Default. Either VMHost(s) or Cluster(s) need to be piped into Invoke-VMHostHBARescan. See Examples. .PARAMETER Cluster Piped output of Get-Cluster from Vmware.PowerCLI .PARAMETER VMHost Piped output of Get-VMHost from Vmware.PowerCLI .INPUTS Results of Get-VMHost or Get-Cluster from Vmware.PowerCLI VMware.VimAutomation.ViCore.Types.V1.Inventory.Cluster VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost .OUTPUTS None .EXAMPLE Rescans and Refreshes the HBAs on one ESX Host: Get-VMHost -Name ESX12 | Invoke-VMHostHBARescan .EXAMPLE Rescans and Refreshes the HBAs on two ESX Hosts, using the Invoke-VMHostHBARescan alias: Get-VMHost -Name ESX01 , ESX03 | ivhr .EXAMPLE Rescans and Refreshes the HBAs on all ESX Hosts in a Cluster: Get-Cluster -Name PROD01 | Invoke-VMHostHBARescan .NOTES Alias ivhr. Parameter Sets restrict to either Cluster input or VMHost input. Not both. #> function Invoke-VMHostHBARescan { [CmdletBinding()] [Alias("ivhr")] param ( [Parameter(ParameterSetName="Cluster", ValueFromPipeline=$true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.Cluster[]]$Cluster, [Parameter(ParameterSetName="VMHost", ValueFromPipeline=$true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]]$VMHost ) Process { if ($Cluster) { $vhs = Get-VMHost -Location $Cluster foreach ($vh in $vhs) { Get-VMHostStorage -VMHost $vh -RescanAllHba -Refresh | Out-Null } } elseif ($vmhost) { foreach ($vmh in $vmhost) { Get-VMHostStorage -VMHost $vmh -RescanAllHba -Refresh | Out-Null } } } } <# .SYNOPSIS Opens a Console Window on a VM. .DESCRIPTION Opens a Console Window on a VM. Was written as an alternative to Open-VMConsoleWindow when Open-VMConsoleWindow was not functioning correctly after a Virtual Center upgrade. .PARAMETER VM Output from VMWare PowerCLI Get-VM. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine] .INPUTS VMWare PowerCLI VM from Get-VM: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine] .EXAMPLE Open a Console Window on a VM. Get-VM -Name Server01 | Open-Console .EXAMPLE Open a Console Window on multiple VMs. Get-VM -Name Test* | Open-Console #> Function Open-Console { [CmdletBinding()] Param ( [Parameter(Mandatory = $true , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine[]] $VM ) Begin { $modn = 'VMware.VimAutomation.Core' $modb = (Get-Module -Name $modn -ListAvailable)[0].ModuleBase $vexe = "$($modb)\net45\VMware Remote Console\vmrc.exe" } Process { foreach ($v in $vm) { $mkst = $v.ExtensionData.AcquireMksTicket() $parm = "vmrc://$($v.VMHost.Name):902/?mksticket=$($mkst.Ticket)&thumbprint=$($mkst.SslThumbPrint)&path=$($mkst.CfgFile)" & "$vexe" $parm } } } <# .SYNOPSIS Restarts Logging on a VMHOST .DESCRIPTION Restarts Logging (SysLog) on the VMHOST provided as an argument. .PARAMETER VMHost Mandatory. Specify one on more ESX hosts. .EXAMPLE Restart-EsxLogging ESXHOST01 #> function Restart-EsxLogging { [CmdletBinding(SupportsShouldProcess = $true , ConfirmImpact = 'medium')] param ( [Parameter(Mandatory = $true, ValueFromPipelineByPropertyName = $true, HelpMessage = "Enter one or more ESX Host Names" )] [Alias("Name")] [string[]]$VMHost ) Process { if($PSCmdlet.ShouldProcess($VMHost)) { foreach ($vmh in $VMHost) { $reesxcli=get-esxcli -v2 -vmhost $vmh $reesxcli.system.syslog.reload.Invoke() } } } } <# .SYNOPSIS Sets Path Selection Policy for DataStores .DESCRIPTION Sets Path Selection Policy to either Most Recently Used, Fixed, or Round Robin. Does not attempt if the requested policy is already set. Produces an object of DataStore, PathSelectionPolicy, HostName, Device, SetPathStatus, WorkingPaths, and CapacityGB for all requested DataStores. Will check / set against every VMHost that has the DataStore Mounted. Will return pipeline error if a non-VMFS DataStore is piped in. .PARAMETER DataStore Output from VMWare PowerCLI Get-DataStore. VMFS datastores only. VMware.VimAutomation.ViCore.Types.V1.DatastoreManagement.VmfsDatastore .PARAMETER Policy Must be one of VMW_PSP_MRU, VMW_PSP_FIXED, or VMW_PSP_RR. MRU = Most Recently Used, FIXED = Fixed, RR = Round Robin. .EXAMPLE Set Path Selection Policy for one Datastore to Round Robin, returning an object into a variable: $MyVar = Get-Datastore -Name VOL02 | Set-PathSelectionPolicy -Policy VMW_PSP_RR .EXAMPLE Set Path Selection Policy for all VMFS Datastores mounted on a ESXi Host to Most Recently Used, returning an object into a variable: $MyVar = Get-Datastore -VMHost ESX03 -Name * | Where-Object -Property Type -Match VMFS | Set-PathSelectionPolicy -Policy VMW_PSP_MRU .INPUTS Output from VMWare PowerCLI Get-DataStore - VMFS datastores only VMware.VimAutomation.ViCore.Types.V1.DatastoreManagement.VmfsDatastore .OUTPUTS [pscustomobject] SupSkiFun.PathSelectionInfo #> function Set-PathSelectionPolicy { [CmdletBinding(SupportsShouldProcess = $true, ConfirmImpact = 'high')] Param ( [Parameter(Mandatory = $true, ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.DatastoreManagement.VmfsDatastore[]]$DataStore, [Parameter(Mandatory = $true)] [ValidateSet("VMW_PSP_MRU", "VMW_PSP_FIXED", "VMW_PSP_RR")]$Policy ) Begin { $exhash = [vClass]::MakeHash('ex') } Process { foreach ($ds in $DataStore) { if($PSCmdlet.ShouldProcess("$ds to $($policy)")) { $device = $ds.ExtensionData.Info.Vmfs.Extent.Diskname $devq = @{device = $device} $dshosts = $ds.ExtensionData.host foreach ($dsh in $dshosts) { $vmh = $exhash.$($dsh.key.ToString()) $e2 = Get-EsxCli -v2 -VMHost $vmh $r2 = $e2.storage.nmp.device.list.Invoke($devq) if($r2.PathSelectionPolicy -notmatch $Policy) { $devset = @{device = $device ; psp = $Policy} $s2 = $e2.storage.nmp.device.set.Invoke($devset) if($s2 -match "true") { $status = "Success" } else { $status = "Unknown: Return value is $s2" } $r2 = $e2.storage.nmp.device.list.Invoke($devq) } elseif ($r2.PathSelectionPolicy -match $Policy) { $status = "Not Attempted; $policy is already set" } $lo = [pscustomobject]@{ DataStore = $ds.Name PathSelectionPolicy = $r2.PathSelectionPolicy HostName = $vmh Device = $device SetPathStatus = $status WorkingPaths = $r2.WorkingPaths CapacityGB = $ds.CapacityGB } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.PathSelectionInfo') Write-Output $lo $devset, $e2, $r2, $s2, $status, $vmh = $null } } } } } <# .SYNOPSIS Sets PereniallyReserved value of RDMs from specified VMHost. .DESCRIPTION Sets PereniallyReserved value of RDMs from specified VMHost to either true or false. Alias setpr. Returns nothing. Use Get-PereniallyReserved to query values. .PARAMETER VMHost VMWare PowerCLI VMHost Object from Get-VMHost VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost .PARAMETER State Value of PereniallyReserved to set. Either True or False .INPUTS VMWare PowerCLI VMHost Object from Get-VMHost: VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost .EXAMPLE Set all RDMs PereniallyReserved value to False for one VMHost: Get-VMHost -Name ESXi17 | Set-PereniallyReserved -State False .EXAMPLE Set all RDMs PereniallyReserved value to True for all VMHosts in a Cluster using the Set-PereniallyReserved alias: Get-VMHost -Name * -Location Cluster12 | setpr -State True .LINK Get-PereniallyReserved #> function Set-PereniallyReserved { [CmdletBinding(SupportsShouldProcess = $true , ConfirmImpact = 'high')] [Alias("setpr")] param ( [Parameter(Mandatory = $true , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]] $VMHost, [Parameter(Mandatory = $true)] # [ValidateSet('true' , 'false' , IgnoreCase = $false)] [ValidateSet('True' , 'False')] [string] $State ) Process { foreach ($vmh in $vmhost) { if ($pscmdlet.ShouldProcess("$vmh all RDMs to $state")) { $x2 = Get-EsxCli -VMHost $vmh -V2 $vd = (Get-Datastore -VMHost $vmh | Where-Object -Property Type -Match VMFS).ExtensionData.Info.Vmfs.Extent.Diskname $dl = $x2.storage.core.device.list.Invoke() # Remove DataStore LUNs, local MicroSd Card, Local Named, Non-Shared from the list. $dl = $dl | Where-Object { $_.Device -notin $vd -and $_.Device -notmatch "^mpx" -and $_.DisplayName -notmatch "Local" -and $_.IsSharedClusterwide -eq "true" } foreach ($d in $dl) { $z2 = $x2.storage.core.device.setconfig.CreateArgs() $z2.device = $d.device $z2.perenniallyreserved = $state.ToLower() $x2.storage.core.device.setconfig.Invoke($z2) } } } } } <# .SYNOPSIS Enables or Disables Alarms from VMHosts and Clusters .DESCRIPTION Enables or Disables Alarms from VMHosts and Clusters. Requires VMHosts and / or Cluster objects to be piped in or specified as a parameter. .PARAMETER VMHost Output from VMWare PowerCLI Get-VMHost [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .PARAMETER Cluster Output from VMWare PowerCLI Get-Cluster [VMware.VimAutomation.ViCore.Types.V1.Inventory.Cluster] .PARAMETER State Set for desired state of alarm; either Enabled or Disabled .INPUTS VMWare PowerCLI VMHost and / or Cluster Object from Get-VMHost and / or Get-Cluster: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] [VMware.VimAutomation.ViCore.Types.V1.Inventory.Cluster] .EXAMPLE Enable alarms for one VMHost: Get-VMHost -Name ESX01 | Set-VSphereAlarmConfig -State Enabled .EXAMPLE Disable alarms for one Cluster: Get-Cluster -Name CLUS01 | Set-VSphereAlarmConfig -State Disabled .EXAMPLE Enable alarms for multiple VMHosts bypassing confirmation prompt: Get-VMHost -Name ESX4* | Set-VSphereAlarmConfig -State Enabled -Confirm:$false .EXAMPLE Disable alarms for all VMHosts and Clusters in the connected Virtual Center: $host = Get-VMHost -Name * $clus = Get-Cluster -Name * Set-VSphereAlarmConfig -VMHost $host -Cluster $clus -State Disabled #> function Set-VSphereAlarmConfig { [CmdletBinding(SupportsShouldProcess=$true, ConfirmImpact='medium')] param ( [Parameter(Mandatory = $false , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]]$VMHost, [Parameter(Mandatory = $false , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.Cluster[]]$Cluster, [Parameter(Mandatory = $true)] [ValidateSet("Enabled" , "Disabled")] [string]$State ) Begin { $errmsg = "VMHost or Cluster Object Required. Try: Help Set-VSphereAlarmConfig -full" } Process { If(!($vmhost -or $cluster)) { Write-Output $errmsg break } Else { $alarmgr = Get-View AlarmManager } If($vmhost) { foreach ($vmh in $vmhost) { if($PSCmdlet.ShouldProcess("$vmh to $($state)")) { if($state -ieq "Enabled") { $alarmgr.EnableAlarmActions($vmh.Extensiondata.MoRef,$true) } elseif($state -ieq "Disabled") { $alarmgr.EnableAlarmActions($vmh.Extensiondata.MoRef,$false) } } } } If($cluster) { foreach ($clu in $cluster) { if($PSCmdlet.ShouldProcess("$clu to $($state)")) { if($state -ieq "Enabled") { $alarmgr.EnableAlarmActions($clu.Extensiondata.MoRef,$true) } elseif($state -ieq "Disabled") { $alarmgr.EnableAlarmActions($clu.Extensiondata.MoRef,$false) } } } } } } <# .SYNOPSIS Shows VMs with CD Drives Connected or configured to Start Connected .DESCRIPTION Returns an object of VM, Name, StartConnected, Connected, AllowGuestControl, IsoPath, HostDevice and RemoteDevice for submitted VMs that have a CD Drive Connected or configured to Start Connected. Non-CD-Connected VMs are skipped. .PARAMETER VM Output from VMWare PowerCLI Get-VM. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine] .INPUTS VMWare PowerCLI VM from Get-VM: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine] .OUTPUTS [pscustomobject] SupSkiFun.VM.ConnectedCD.Info .EXAMPLE Retrieve information for one VM: Get-VM -Name System01 | Show-ConnectedCD .EXAMPLE Retrieve information for two VMs, returning object into a variable: $myVar = Get-VM -Name System04 , System07 | Show-ConnectedCD .EXAMPLE Retrieve information for all VMs, returning object into a variable: $MyVar = Get-VM -Name * | Show-ConnectedCD #> Function Show-ConnectedCD { [CmdletBinding()] Param ( [Parameter(Mandatory = $true , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine[]]$VM ) Process { $x = Get-CDDrive -VM $vm foreach ($y in $x) { if ($y.ConnectionState.StartConnected -or $y.ConnectionState.Connected) { $lo = [pscustomobject]@{ VM = $y.Parent.Name Name = $y.Name StartConnected = $y.ConnectionState.StartConnected Connected = $y.ConnectionState.Connected AllowGuestControl = $y.ConnectionState.AllowGuestControl IsoPath = $y.isopath HostDevice = $y.HostDevice RemoteDevice = $y.RemoteDevice } $lo $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.VM.ConnectedCD.Info') } } } } <# .SYNOPSIS Outputs DRS rules for specified clusters .DESCRIPTION Outputs an object of DRS Rule Name, cluster, VMIds, VM Name, Type and Enabled for specified clusters. Alias = sdr .PARAMETER Cluster Mandatory. Cluster(s) to query for DRS rules. Can manually enter or pipe output from VmWare Get-Cluster. .OUTPUTS PSCUSTOMOBJECT SupSkiFun.PortGroupInfo .EXAMPLE Retrieve DRS rule for one cluster, placing the object into a variable: $MyVar = Show-DrsRule -Cluster cluster09 .EXAMPLE Retrieve DRS rules for all clusters, using the Show-DrsRule alias, placing the object into a variable: $MyVar = Get-Cluster -Name * | sdr #> Function Show-DrsRule { [CmdletBinding()] [Alias("sdr")] param ( [Parameter(ValueFromPipelineByPropertyName = $true, ValueFromPipeline = $true, Mandatory=$true)] [Alias("Name")] $Cluster ) Begin { $vmhash = [vClass]::MakeHash('vm') } Process { $drule = Get-DrsRule -Cluster $Cluster foreach ($rule in $drule) { $vname = foreach ($vn in $rule.vmids) { $vmhash.$vn } $lo = [vClass]::MakeSDRObj($vname , $rule) $lo $vname = $null } } } <# .SYNOPSIS Provides contents of Vsphere Folders .DESCRIPTION Returns an object of ItemName, ItemType, ItemMoRef, FolderName, FolderId, and FolderPath of specified Vsphere Folders. Item properties are the contents of the folder. Folder properties elucidate folder information. .PARAMETER Folder Output from VMWare PowerCLI Get-Folder. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.Folder] .PARAMETER Recurse If specified will recurse all subfolders of specified folder. .INPUTS VMWare PowerCLI Folder from Get-Folder: [VMware.VimAutomation.ViCore.Types.V1.Inventory.Folder] .OUTPUTS [pscustomobject] SupSkiFun.VSphereFolderInfo .EXAMPLE Retrieve contents of one folder: Get-Folder -Name TEMP | Show-FolderContent .EXAMPLE Retrieve contents of one folder and all of its subfolders: Get-Folder -Name TEMP | Show-FolderContent -Recurse .EXAMPLE Retrieve content of multiple folders, returning object into a variable: $myVar = Get-Folder -Name UAT , QA | Show-FolderContent .EXAMPLE Retrieve content from all folders, returning object into a variable (this may require a few minutes): $MyVar = Get-Folder -Name * | Show-FolderContent .LINK Get-Folder Show-FolderPath #> Function Show-FolderContent { [CmdletBinding()] Param ( [Parameter(Mandatory = $true , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.Folder[]]$Folder, [Switch]$Recurse ) Begin { $mt = "Empty Folder" $ei = @{ Name = $mt MoRef = $mt } } Process { Function MakeObj { param ($item, $type) $lo = [pscustomobject]@{ ItemName = $item.Name ItemType = $type ItemMoRef = $item.MoRef FolderName = $fol.Name FolderID = $fol.ID FolderPath = ($fol | Show-FolderPath).Path } $lo $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.VSphereFolder.Info') } Function GetInfo ($fol) { foreach ($x in $fol.ExtensionData.ChildEntity) { $t = $x.type $q = Get-view $x | Select-Object -Property Name, Moref if ($Recurse -and $t -eq "Folder") { $nfol = Get-Folder -id $q.MoRef MakeObj -item $q -type $t GetInfo ($nfol) } else { MakeObj -item $q -type $t } } } foreach ($fol in $folder) { if ($fol.ExtensionData.ChildEntity) { GetInfo $fol } else { MakeObj -item $ei -type $mt } } } } <# .SYNOPSIS Provides information on Vsphere Folders .DESCRIPTION Returns an object of Name, Id, Path, and Type for specified Vsphere Folders. If multiple folders have the same name, they will all be returned with differing Ids and Paths listed. .PARAMETER Folder Output from VMWare PowerCLI Get-Folder. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.Folder] .INPUTS VMWare PowerCLI Folder from Get-Folder: [VMware.VimAutomation.ViCore.Types.V1.Inventory.Folder] .OUTPUTS [pscustomobject] SupSkiFun.VSphereFolderInfo .EXAMPLE Retrieve information for one folder name: Get-Folder -Name TEMP | Show-FolderPath .EXAMPLE Retrieve information for multiple folders, returning object into a variable: $myVar = Get-Folder -Name UAT , QA | Show-FolderPath .EXAMPLE Retrieve information for all folders, returning object into a variable (this may require a few minutes): $MyVar = Get-Folder -Name * | Show-FolderPath #> Function Show-FolderPath { [CmdletBinding()] Param ( [Parameter(Mandatory = $true , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.Folder[]]$Folder ) Process { foreach ($sn in $folder) { $sne = $sn.ExtensionData $fp = $sn.name while ($sne.Parent) { $sne = Get-View $sne.Parent $fp = Join-Path -Path $sne.name -ChildPath $fp } $lo = [PSCustomObject]@{ Name = $sn.Name Id = $sn.id Path = $fp Type = $sn.Type } $lo $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.VSphereFolder.Info') } } } <# .SYNOPSIS Show RDMs from specified VMs or VMHosts .DESCRIPTION Returns an object of RDMs listing DevfsPath, Device, DisplayName, IsPerenniallyReserved, Size, Status, VAAIStatus, Vendor, HostName and VM (if applicable) from VMs or VMHosts. Alias srdm. .PARAMETER VM VMWare PowerCLI VM Object from Get-VM VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine .PARAMETER VMHost VMWare PowerCLI VMHost Object from Get-VMHost VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost .INPUTS VMWare PowerCLI VM or VMHost Object from Get-VM or Get-VMHost: VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost .OUTPUTS PSCUSTOMOBJECT SupSkiFun.RDM.Info .EXAMPLE Query one VM for RDMs: Get-VM -Name Server01 | Show-RDM .EXAMPLE Query one VMHost for RDMs: Get-VMHost -Name ESXi17 | Show-RDM .EXAMPLE Query multiple VMs for RDMs, returning object into a variable: $myVar = Get-VM -Name Server50* | Show-RDM .EXAMPLE Query all VMHosts in a cluster using the Show-RDM alias, returning object into a variable: $myVar = Get-VMHost -Name * -Location Cluster12 | srdm #> function Show-RDM { [CmdletBinding()] [Alias("srdm")] param ( [Parameter(ParameterSetName = "VM" , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine[]]$VM, [Parameter(ParameterSetName = "VMHost" , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]]$VMHost ) Begin { # RDM properties to query. $rvals = @( "DevfsPath" "Device" "DisplayName" "IsPerenniallyReserved" "Size" "Status" "VAAIStatus" "Vendor" ) } Process { Function vmrdm { foreach ($v in $vm) { $ds = Get-HardDisk -VM $v -DiskType "RawPhysical","RawVirtual" $x2 = Get-EsxCli -VMHost $v.VMHost -V2 $dl = $x2.storage.core.device.list.Invoke() foreach ($d in $ds) { $rdisk = $dl | Where-Object -Property Device -Match $d.ScsiCanonicalName | Select-Object $rvals MakeObj -diskdata $rdisk -hostdata $v.VMHost.Name -vmdata $v.name } } } Function vmhrdm { foreach ($vmh in $vmhost) { $x2 = Get-EsxCli -VMHost $vmh -V2 $vd = (Get-Datastore -VMHost $vmh | Where-Object -Property Type -Match VMFS).ExtensionData.Info.Vmfs.Extent.Diskname $dl = $x2.storage.core.device.list.Invoke() # Remove DataStore LUNs and local MicroSd Card from the list. $dl = $dl | Where-Object {$_.Device -notin $vd -and $_.Device -notmatch "^mpx"} foreach ($d in $dl) { MakeObj -diskdata $d -hostdata $vmh.Name } } } Function MakeObj { param($diskdata , $hostdata , $vmdata = "N/A") $loopobj = [pscustomobject]@{ VM = $vmdata HostName = $hostdata DevfsPath = $diskdata.DevfsPath Device = $diskdata.Device DisplayName = $diskdata.DisplayName IsPerenniallyReserved = $diskdata.IsPerenniallyReserved SizeGB = [Math]::Round($diskdata.Size /1kb, 2) Status = $diskdata.Status VAAIStatus = $diskdata.VAAIStatus Vendor = $diskdata.Vendor } $loopobj $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.RDM.Info') } if ($vm) { vmrdm } elseif ($vmhost) { vmhrdm } else { Write-Output "VM or VMHost must be piped in. Terminating" break } } } <# .SYNOPSIS Displays IP connections on an ESX Host .DESCRIPTION Displays IP connections on the ESX Host specified. Akin to NetStat or SS. .PARAMETER VMHost Mandatory. Specify an ESX hosts. .EXAMPLE Place results from one ESX hosts into a variable: $myVar = Show-SS -VMHost ESXHOST01 #> function Show-SS { [CmdletBinding()] [Alias("ss")] param ( [Parameter(Mandatory = $true, ValueFromPipelineByPropertyName = $true, HelpMessage = "Enter ESX Host Name" )] [Alias("Name")] [string]$VMHost ) Process { foreach ($vmh in $vmhost) { $esxcli = Get-EsxCli -V2 -VMHost $vmh $esxcli.network.ip.connection.list.invoke() } } } <# .SYNOPSIS Retrieves detailed information from submitted tasks. .DESCRIPTION Retrieves detailed information from submitted tasks. Returns an object of Name, Description, ID, State, IsCancelable, PercentComplete, Start, Finish, UserName, EntityName, and EntityID. .PARAMETER Task Output from VMWare PowerCLI Get-Task. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Task] .INPUTS VMWare PowerCLI Task from Get-Task: [VMware.VimAutomation.ViCore.Types.V1.Task] .OUTPUTS [PSCUSTOMOBJECT] SupSkiFun.Task.Info .EXAMPLE Retrieve information from all running tasks, returning an object into a variable: $MyVar = Get-Task -Status Running | Show-TaskInfo .EXAMPLE Retrieve information from all relocation tasks, returning an object into a variable: $MyVar = Get-Task | Where-Object -Property Name -Match reloc | Show-TaskInfo .EXAMPLE Retrieve information from all recent tasks, returning an object into a variable: $MyVar = Get-Task | Show-TaskInfo #> function Show-TaskInfo { [CmdletBinding()] Param ( [Parameter(Mandatory = $true, ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Task[]] $Task ) Process { foreach ($t in $task) { $lo = [pscustomobject]@{ Name = $t.Name Description = $t.Description ID = $t.Id State = $t.State IsCancelable = $t.IsCancelable PercentComplete = $t.PercentComplete Start = $t.StartTime Finish = $t.FinishTime UserName = $t.ExtensionData.Info.Reason.UserName EntityName = $t.ExtensionData.Info.EntityName EntityID = $t.ExtensionData.Info.Entity } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.Task.Info') $lo } } } <# .SYNOPSIS Queries for VMs with a USB Controller Installed .DESCRIPTION Returns an object of VM, Notes, VMHost and USB from VMs with a USB Controller Installed .PARAMETER VM Output from VMWare PowerCLI Get-VM. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine] .EXAMPLE Query one VM for USB Controller: Get-VM -Name VM01 | Show-USBController .EXAMPLE Query all VMs for USB Controller, returning object into a variable: $myVar = Get-VM -Name * | Show-USBController .INPUTS VMWare PowerCLI VMHost from Get-VM: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine] .OUTPUTS PSCUSTOMOBJECT SupSkiFun.USB.Info #> function Show-USBController { [CmdletBinding()] Param ( [Parameter(Mandatory = $true , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine[]]$VM ) Begin { $usbd = $null } Process { foreach ($v in $VM) { $usbd = ($v.ExtensionData.Config.Hardware.Device.deviceinfo | Where-Object -Property label -imatch "USB").label if ($usbd) { $lo = [pscustomobject]@{ VM = $v.Name Notes = $v.Notes VMHost = $v.VMHost USB = $usbd } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.USB.Info') $lo } } } } <# .SYNOPSIS Obtains basic network settings from VMHost(s) .DESCRIPTION Returns an object of HostName, IP, NTPServer, DNSServer, SearchDomain and IPv6Enabled from VMHosts .PARAMETER VMHost VMWare PowerCLI VMHost Object from Get-VMHost VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost .INPUTS VMHost Object from Get-VMHost: VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost .OUTPUTS PSCUSTOMOBJECT SupSkiFun.VMHostNetworkInfo .EXAMPLE Query one VMHost for Network Info: Get-VMHost -Name ESXi17 | Show-VMHostNetworkInfo .EXAMPLE Query multiple hosts, returning the object into a variable, using the Show-VMHostNetworkInfo alias: $MyObj = Get-VMHost -Name ESX0* | svni #> function Show-VMHostNetworkInfo { [CmdletBinding()] [Alias("svni")] param ( [Parameter(ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]]$VMHost ) Process { foreach($vmh in $vmhost) { $n = Get-VMHostNetwork -VMHost $vmh $p = Get-VMHostNtpServer -VMHost $vmh $ip = (Get-VMHostNetworkAdapter -VMHost $vmh).ip $ipv = foreach ($i in $ip) { if(!([string]::IsNullOrEmpty($i))) { $i } } $lo = [pscustomobject]@{ HostName = $vmh.Name IP = $ipv NTPServer = $p DNSServer = $n.DnsAddress SearchDomain = $n.SearchDomain IPv6Enabled = $n.IPv6Enabled } $lo $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.VMHostNetworkInfo') } } } <#.Synopsis Obtains Port Groups from ESXi Hosts .DESCRIPTION Returns an object of PortGroup, VLAN, HostName, Vswitch, VswitchMTU, and VswitchPorts. .PARAMETER VMHost Output from VMWare PowerCLI Get-VMHost. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .INPUTS VMWare PowerCLI VMHost from Get-VMHost: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .OUTPUTS PSCUSTOMOBJECT SupSkiFun.PortGroup.Info .EXAMPLE Return Port Group Object from one ESXi Host: Get-VMHost -Name ESX01 | Show-VMHostVirtualPortGroup .EXAMPLE Place Port Group Object from two ESXi Hosts into a variable: $MyVar = Get-VMHost -Name ESX03, ESX04 | Show-VMHostVirtualPortGroup #> function Show-VMHostVirtualPortGroup { [CmdletBinding()] param ( [Parameter(Mandatory = $true , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]] $VMHost ) Process { $vpg = $vmhost | Get-VirtualPortGroup -Name * foreach ($vp in $vpg) { $lo = [vClass]::MakeObjSVVPG($vp) $lo } } } <# .SYNOPSIS Return an object of information & resources for VM(s) .DESCRIPTION Return an object of information and resources used by VM(s): Name, CPU (number, cores, sockets), RAM, Host, OS, Notes, Disks Optionally return embedded objects of Datastores and/or VMHosts available to the VM. See Examples. .PARAMETER VM Mandatory. Name(s) of VMs to process. .PARAMETER Full Optional. Returns embedded objects of Datastores and VMHosts available to the VM, in addition to the default output. Equivalent of -Datastore -Cluster. See Examples. .PARAMETER DataStore Optional. Returns an embedded object of Datastores available to the VM, in addition to the default output. See Examples. .PARAMETER Cluster Optional. Returns an embedded object of VMHosts available to the VM, in addition to the default output. See Examples. .OUTPUTS PSCUSTOMOBJECT SupSkiFun.VMInfo .EXAMPLE Return Default Output for one VM: Show-VMResource -VM VM01 .EXAMPLE Return Default and Datastore Output for one VM, using the Show-VMResource alias: svr -VM VM02 -DataStore .EXAMPLE Return Default and Cluster-VMHost Output for two VMs, placing object into a variable: $myVar = Show-VMResource -VM VM03,VM04 -Cluster .EXAMPLE Return Default, Datastore and Cluster-VMHost Output for two VMs, placing object into a variable, using the Show-VMResource alias: $myVar = svr -VM VM05,VM06 -Full .EXAMPLE Return Default Output for multiple VMs, piping data from Get-VM, placing object into a variable: $myVar = Get-VM -Name d* | Show-VMResource #> function Show-VMResource { [CmdletBinding()] [Alias("svr")] param ( [Parameter(Mandatory=$true, ValueFromPipelineByPropertyName=$true, HelpMessage="Enter a VM Name" )] [Alias("Name","ComputerName")] [string[]]$VM, [switch]$Full, [switch]$DataStore, [switch]$Cluster ) Begin { $nodata = "No Data. Likely a Regular VM" if($full) { $Datastore=$true $Cluster=$true } } Process { foreach($v in $vm) { $vmdata = Get-VM -Name $v $vmtype = $vmdata.ExtensionData.Summary.config.ManagedBy.Type if(!($vmtype)) { $vmtype = $nodata } $hddata = Get-HardDisk -VM $v | Select-Object -Property Name, FileName, @{n="CapacityGB";e={[math]::Round($_.CapacityGB,2)}} , StorageFormat $numcpu = $vmdata.numcpu.ToDecimal($null) $coreps = $vmdata.CoresPerSocket.ToDecimal($null) $loopobj = [pscustomobject]@{ Name = $vmdata.name NumCPU = $numcpu CoresPerSocket = $coreps Sockets = ($numcpu / $coreps).ToDecimal($null) RAM = $vmdata.memorygb.ToDecimal($null) Host = $vmdata.vmhost OS = $vmdata.ExtensionData.config.GuestFullName Notes = $vmdata.Notes Disk = $hddata Type = $vmtype } if($Datastore) { $dsdata = Get-Datastore -vmhost $vmdata.vmhost | Sort-Object -Property Name $loopobj | Add-Member -MemberType NoteProperty -name "DataStore" -value $dsdata } if($Cluster) { $vmhdata = Get-VMHost -Location (Get-Cluster -VMHost $vmdata.vmhost) | Sort-Object -Property Name $loopobj | Add-Member -MemberType NoteProperty -name "Cluster" -value $vmhdata } $loopobj.PSObject.TypeNames.Insert(0,'SupSkiFun.VMInfo') $loopobj } } } <# .SYNOPSIS Retrieves Memory, CPU, and NET statistics .DESCRIPTION Retrieves Memory, CPU, and NET usage statistics. Memory and CPU are in PerCentAge; NET is in KBps. Returns an object of VM, CPUaverage, MEMaverage, NETaverage, CPUmaximum, MEMmaximum, and NETmaximum. .PARAMETER VM Output from VMWare PowerCLI Get-VM. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine] .PARAMETER Days Number of Past Days to check. Defaults to 30. 1 to 45 accepted. .EXAMPLE Retrieve statistical information of one VM, returning the object into a variable: $myVar = Get-VM -Name SYS01 | Show-VMStat .EXAMPLE Retrieve statistical information of two VMs, returning the object into a variable: $myVar = Get-VM -Name SYS02 , SYS03 | Show-VMStat .INPUTS VMWare PowerCLI VM from Get-VM: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine] .OUTPUTS [pscustomobject] SupSkiFun.VM.Stat.Info .LINK Get-Stat Get-StatType Get-StatInterval #> function Show-VMStat { [CmdletBinding()] Param ( [Parameter(Mandatory = $true , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine[]] $VM, [Parameter()][ValidateRange(1,45)] [int32] $Days = 30 ) Begin { $dt = Get-Date $nd = "No Data" $ohash = @{} $st = @( 'cpu.usage.average' 'mem.usage.average' 'net.usage.average' ) $sp = @{ Start = ($dt).AddDays(-$days) Finish = $dt MaxSamples = 10000 Stat = $st } } Process { foreach ($v in $vm) { $ohash.Clear() $r1 , $c1 , $t1 = $null $r1 = Get-Stat -Entity $v @sp foreach ($s in $st) { $t1 = $s.Split(".")[0].ToUpper() $c1 = $r1 | Where-Object -Property MetricID -Match $s | Measure-Object -Property Value -Average -Maximum if ($c1) { $ohash.Add($($t1+"avg"),[math]::Round($c1.Average,2)) $ohash.Add($($t1+"max"),[math]::Round($c1.Maximum,2)) } else { $ohash.Add($($t1+"avg"),$nd) $ohash.Add($($t1+"max"),$nd) } } $lo = [VClass]::MakeSTObj($v.Name , $ohash) $lo $r1 , $c1 , $t1 = $null } } } <# .SYNOPSIS Starts SSH on an ESX Host .DESCRIPTION Starts SSH on an ESX Host. .PARAMETER VMHost Mandatory. Specify one on more ESX hosts. .EXAMPLE Starts SSH on two ESX Hosts: Start-SSH -VMHost MyESX07 , MyESX08 .EXAMPLE Starts SSH on all ESX Hosts in a Cluster: Get-VMHost -Location MyCluster44 | Start-SSH #> function Start-SSH { [CmdletBinding(SupportsShouldProcess = $true , ConfirmImpact = 'medium')] param ( [Parameter(Mandatory = $true, ValueFromPipelineByPropertyName = $true, HelpMessage = "Enter one or more ESX Host Names" )] [Alias("Name")] [string[]]$VMHost ) Process { if($PSCmdlet.ShouldProcess($VMHost)) { foreach ($vmh in $VMHost) { Get-VMHostService $vmh | Where-object {$_.Key -eq "TSM-SSH"} | Start-VMHostService -confirm:$false } } } } <# .SYNOPSIS Stops SSH on an ESX Host .DESCRIPTION Stops SSH on an ESX Host. .PARAMETER VMHost Mandatory. Specify one on more ESX hosts. .EXAMPLE Stops SSH on two ESX Hosts: Stop-SSH -VMHost MyESX05 , MyESX05 .EXAMPLE Stops SSH on all ESX Hosts in a Cluster: Get-VMHost -Location MyCluster77 | Stop-SSH #> function Stop-SSH { [CmdletBinding(SupportsShouldProcess = $true , ConfirmImpact = 'medium')] param ( [Parameter(Mandatory = $true, ValueFromPipelineByPropertyName = $true, HelpMessage = "Enter one or more ESX Host Names" )] [Alias("Name")] [string[]]$VMHost ) Process { if($PSCmdlet.ShouldProcess($VMHost)) { foreach ($vmh in $VMHost) { Get-VMHostService $vmh | Where-object {$_.Key -eq "TSM-SSH"} | Stop-VMHostService -confirm:$false } } } } <# .SYNOPSIS Kills VM Process .DESCRIPTION Kills VM Process, returning an object of VM, Result, and VMHost. .PARAMETER VM Output from VMWare PowerCLI Get-VM. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine] .PARAMETER Type Either soft, hard or force. soft - Gives the VMX process a chance to shut down cleanly (like kill or kill -SIGTERM) hard - Stops the VMX process immediately (like kill -9 or kill -SIGKILL) force - Stops the VMX process when other options do not work. Last Resort. .EXAMPLE Perform a soft kill of one VM, returning the object into a variable: $myVar = Get-VM -Name SYS01 | Stop-VMpid -Type soft .EXAMPLE Perform a hard kill of two VMs, returning the object into a variable: $myVar = Get-VM -Name SYS02 , SYS03 | Stop-VMpid -Type hard .INPUTS VMWare PowerCLI VM from Get-VM: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine] .OUTPUTS [pscustomobject] SupSkiFun.VM.PID.Info .LINK Get-VMpid #> function Stop-VMpid { [CmdletBinding(SupportsShouldProcess = $true, ConfirmImpact = 'high')] Param ( [Parameter(Mandatory = $true , ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VirtualMachine[]]$VM, [Parameter(Mandatory = $true)] [ValidateSet("soft", "hard", "force")] [string]$Type ) Begin { } Process { Function MakeObj { param($vdata,$resdata) $lo = [PSCustomObject]@{ VM = $vdata.Name Result = $resdata VMHost = $vdata.VMHost.Name } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.VM.PID.Info') $lo } foreach ($v in $vm) { if($PSCmdlet.ShouldProcess("$v with kill type $($type)")) { if ($v.PowerState -eq "PoweredOn") { $x2 = Get-EsxCli -V2 -VMHost $v.vmhost.Name $r1 = $x2.vm.process.list.Invoke() | Where-Object -Property DisplayName -eq $v.Name $z2 = $x2.vm.process.kill.CreateArgs() $z2.type = $Type $z2.worldid = $r1.WorldID $r2 = $x2.vm.process.kill.Invoke($z2) MakeObj -vdata $v -resdata $r2 } else { $np = "Not Attempted; VM Power state is $($v.PowerState)" MakeObj -vdata $v -resdata $np } } } } } <# .SYNOPSIS Terminates a VSphere Session .DESCRIPTION Terminates a VSphere Session with provided session key. Session keys can be obtained with Get-VSphereSession. .EXAMPLE Kills the VSphere Session affiliated with the provided key: Stop-VSphereSession -Key 89887dbe9-7rrtje9ce-1ee1-d40-8b0ae5fa #> function Stop-VSphereSession { [CmdletBinding(SupportsShouldProcess = $true, ConfirmImpact = 'high' )] param ( [Parameter(Mandatory = $true, ValueFromPipelineByPropertyName = $true, HelpMessage = "Enter Session Key" )] [string[]]$Key ) Begin { $ses = (Get-View $DefaultViserver.ExtensionData.Client.ServiceContent.SessionManager) } Process { foreach ($cle in $key) { if($PSCmdlet.ShouldProcess($cle)) { $ses.TerminateSession($cle) } } } } <# .SYNOPSIS UnInstalls VIB(s) on VMHost(s). .DESCRIPTION UnInstalls VIB(s) on VMHost(s) and returns an object of HostName, Message, RebootRequired, VIBSInstalled, VIBSRemoved, and VIBSSkipped. .PARAMETER VMHost Output from VMWare PowerCLI Get-VMHost. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .PARAMETER VIB Name(s) of VIBS to remove. Example: NetAppNasPlugin , esx-ui .INPUTS VMWare PowerCLI VMHost from Get-VMHost: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .OUTPUTS [PSCUSTOMOBJECT] SupSkiFun.VIBinfo .EXAMPLE Uninstall one VIB from one VMHost, returning an object into a variable: $MyVar = Get-VMHost -Name ESX02 | UnInstall-VIB -VIB NetAppNasPlugin .EXAMPLE Uninstall two VIBs from two VMHosts, returning an object into a variable: $MyVar = Get-VMHost -Name ESX03 , ESX04 | UnInstall-VIB -VIB vsan , vmkfcoe #> function UnInstall-VIB { [CmdletBinding(SupportsShouldProcess=$true, ConfirmImpact='high')] Param ( [Parameter(Mandatory = $true, ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]]$VMHost, [Parameter(Mandatory=$true)] [string[]]$VIB ) Process { foreach ($vmh in $VMHost) { $cible = @{vibname = $VIB} if($PSCmdlet.ShouldProcess("$vmh uninstalling $VIB")) { $xcli = get-esxcli -v2 -VMHost $vmh $res = $xcli.software.vib.remove.invoke($cible) $lo = [PSCustomObject]@{ HostName = $vmh Message = $res.Message RebootRequired = $res.RebootRequired VIBsInstalled = $res.VIBsInstalled VIBsRemoved = $res.VIBsRemoved VIBsSkipped = $res.VIBsSkipped } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.VIBinfo') Write-Output $lo } } } } <# .SYNOPSIS Updates VIB(s) on VMHost(s). .DESCRIPTION Updates VIB(s) on VMHost(s) and returns an object of HostName, Message, RebootRequired, VIBSInstalled, VIBSRemoved, and VIBSSkipped. .PARAMETER VMHost Output from VMWare PowerCLI Get-VMHost. See Examples. [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .PARAMETER URL URL(s) for the VIB(s). https://www.example.com/VMware_bootbank_vsanhealth_6.5.0-2.57.9183449.vib , https://www.example.com/VMware_bootbank_esx-base_6.7.0-0.20.9484548 .INPUTS VMWare PowerCLI VMHost from Get-VMHost: [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost] .OUTPUTS [PSCUSTOMOBJECT] SupSkiFun.VIBinfo .EXAMPLE Update one VIB on one VMHost, returning an object into a variable: $u = 'https://www.example.com/VMware_bootbank_vsanhealth_6.5.0-2.57.9183449.vib' $MyVar = Get-VMHost -Name ESX02 | Update-VIB -URL $u .EXAMPLE Update two VIBs on two VMHosts, returning an object into a variable: $uu = 'https://www.example.com/VMware_bootbank_vsanhealth_6.5.0-2.57.9183449.vib' , 'https://www.example.com/VMware_bootbank_esx-base_6.7.0-0.20.9484548' $MyVar = Get-VMHost -Name ESX03 , ESX04 | Update-VIB -URL $uu #> function Update-VIB { [CmdletBinding(SupportsShouldProcess = $true , ConfirmImpact = 'high')] Param ( [Parameter(Mandatory = $true, ValueFromPipeline = $true)] [VMware.VimAutomation.ViCore.Types.V1.Inventory.VMHost[]]$VMHost, [Parameter(Mandatory = $true)] [string[]]$URL ) Process { Function MakeObj { param($vhdata,$resdata) $lo = [PSCustomObject]@{ HostName = $vhdata Message = $resdata.Message RebootRequired = $resdata.RebootRequired VIBsInstalled = $resdata.VIBsInstalled VIBsRemoved = $resdata.VIBsRemoved VIBsSkipped = $resdata.VIBsSkipped } $lo.PSObject.TypeNames.Insert(0,'SupSkiFun.VIB.Info') $lo } $cible = @{viburl = $URL} foreach ($vmh in $VMHost) { if($PSCmdlet.ShouldProcess("$vmh installing $URL")) { $xcli = Get-EsxCli -v2 -VMHost $vmh $resp = $xcli.software.vib.update.invoke($cible) MakeObj -vhdata $vmh.Name -resdata $resp } } } } |